asterisk

Commit Graph

Author	SHA1	Message	Date
phoneben	4f17e66aad	app_queue: Fix rN raise_penalty ignoring min_penalty in calc_metric QUEUE_RAISE_PENALTY=rN was not respected during member selection. calc_metric() raised penalties below QUEUE_MIN_PENALTY, allowing excluded members to be selected. This change makes calc_metric() honor raise_respect_min, keeping behavior consistent with queue empty checks and expected rN semantics UserNote: Fixes an issue where QUEUE_RAISE_PENALTY=rN could raise a member’s penalty below QUEUE_MIN_PENALTY during member selection. This could allow members intended to be excluded to be selected. The queue now consistently respects the minimum penalty when raising penalties, aligning member selection behavior with queue empty checks and documented rN semantics.	6 months ago
serfreeman1337	46d305b8d1	app_queue: Only compare calls at 1st position across queues when forcing longest waiting caller. This prevents a situation where a call joining at 1st position to a queue with calls leads to a state where no callers are considered the longest waiting, causing queues to stop offering calls. Resolves: #1691	6 months ago
Jasper Hafkenscheid	b757fc24d6	channelstorage_cpp_map_name_id: Fix get_by_name_prefix prefix match Lower bound filter did not ensure prefix match. Resolves: #1730	6 months ago
George Joseph	594d86f1be	app_amd: Remove errant space in documentation for totalAnalysisTime.	6 months ago
Talha Asghar	2a1c208950	say.c: added language support for pashto and dari With this new feature, users who speak these languages can now benefit from the text-to-speech functionality provided by asterisk. This will make the platform more accessible and useful to a wider range of users, particularly those in regions where Pashto and Dari are spoken. This contribution will help to improve the overall usability and inclusivity of the asterisk platform. Fixes: #1724	6 months ago
hishamway	b08ed4f519	res_pjsip_session.c: Prevent INVITE failover when session is cancelled When an outbound INVITE transaction times out (408) or receives a 503 error, check_request_status() attempts to failover to the next available address by restarting the INVITE session. However, the function did not check if the inv_session was already cancelled before attempting the failover. This caused unexpected behavior when a caller hung up during a ring group scenario: after CANCEL was sent but the remote endpoint failed to respond with 487 (e.g., due to network disconnection), the transaction timeout would trigger a NEW outbound INVITE to the next address, even though the session was already terminated. This violates RFC 3261 Section 9.1 which states that if no final response is received after CANCEL within 64*T1 seconds, the client should consider the transaction cancelled and destroy it, not retry to another address. The fix adds a check for both PJSIP_INV_STATE_DISCONNECTED and inv->cancelling at the beginning of check_request_status(). This ensures that: - Failover is blocked when the user explicitly cancelled the call (CANCEL sent) - Failover is still allowed for legitimate timeout/503 scenarios where no CANCEL was initiated (e.g., SRV failover when first server is unreachable) Resolves: #1716	6 months ago
Alexei Gradinari	4379340669	res_pjsip_pubsub: Fix ao2 reference leak of subscription tree in ast_sip_subscription allocate_subscription() increments the ao2 reference count of the subscription tree, but the reference was not consistently released during subscription destruction, resulting in leaked sip_subscription_tree objects. This patch makes destroy_subscription() responsible for releasing sub->tree, removes ad-hoc cleanup in error paths, and guards tree cleanup to ensure refcount symmetry and correct ownership. Fixes: #1703	6 months ago
Asterisk Development Team	65a52c1767	Update for 23.2.2	8 months ago
George Joseph	daa54b0e8d	xml.c: Replace XML_PARSE_NOENT with XML_PARSE_NONET for xmlReadFile. The xmlReadFile XML_PARSE_NOENT flag, which allows parsing of external entities, could allow a potential XXE injection attack. Replacing it with XML_PARSE_NONET, which prevents network access, is safer. Resolves: #GHSA-85x7-54wr-vh42	8 months ago
Mike Bradeen	6507b4e4d4	ast_coredumper: check ast_debug_tools.conf permissions Prevent ast_coredumper from using ast_debug_tools.conf files that are not owned by root or are writable by other users or groups. Prevent ast_logescalator and ast_loggrabber from doing the same if they are run as root. Resolves: #GHSA-rvch-3jmx-3jf3 UserNote: ast_debug_tools.conf must be owned by root and not be writable by other users or groups to be used by ast_coredumper or by ast_logescalator or ast_loggrabber when run as root.	8 months ago
George Joseph	6704d67d5e	http.c: Change httpstatus to default disabled and sanitize output. To address potential security issues, the httpstatus page is now disabled by default and the echoed query string and cookie output is html-escaped. Resolves: #GHSA-v6hp-wh3r-cwxh UpgradeNote: To prevent possible security issues, the `/httpstatus` page served by the internal web server is now disabled by default. To explicitly enable it, set `enable_status=yes` in http.conf.	8 months ago
Mike Bradeen	f22b38ca36	ast_coredumper: create gdbinit file with restrictive permissions Modify gdbinit to use the install command with explicit permissions (-m 600) when creating the .ast_coredumper.gdbinit file. This ensures the file is created with restricted permissions (readable/writable only by the owner) to avoid potential privilege escalation. Resolves: #GHSA-xpc6-x892-v83c	8 months ago
Asterisk Development Team	4342e2a9a2	Update for 23.2.1	8 months ago
Sean Bright	51403b2981	asterisk.c: Use C.UTF-8 locale instead of relying on user's environment. Resolves: #1739	8 months ago
Asterisk Development Team	61eadcb3be	Update for 23.2.0	8 months ago
George Joseph	7ee7020201	chan_websocket.conf.sample: Fix category name. UserNote: The category name in the chan_websocket.conf.sample file was incorrect. It should be "global" instead of "general".	8 months ago
Asterisk Development Team	f203bd9dd6	Update for 23.2.0-rc1	9 months ago
Joe Garlick	7ba3d86200	chan_websocket: Fixed Ping/Pong messages hanging up the websocket channel When chan_websocket received a Ping or a Pong opcode it would cause the channel to hangup. This change allows Ping/Pong opcodes and allows them to silently pass	9 months ago
Sean Bright	2e951c1e74	cli.c: Allow 'channel request hangup' to accept patterns. This extends 'channel request hangup' to accept multiple channel names, a POSIX Extended Regular Expression, a glob-like pattern, or a combination of all of them. UserNote: The 'channel request hangup' CLI command now accepts multiple channel names, POSIX Extended Regular Expressions, glob-like patterns, or a combination of all of them. See the CLI command 'core show help channel request hangup' for full details.	9 months ago
Mike Bradeen	5c83c96030	res_sorcery_memory_cache: Reduce cache lock time for sorcery memory cache populate command Reduce cache lock time for AMI and CLI sorcery memory cache populate commands by adding a new populate_lock to the sorcery_memory_cache struct which is locked separately from the existing cache lock so that the cache lock can be maintained for a reduced time, locking only when the cache objects are removed and re-populated. Resolves: #1700 UserNote: The AMI command sorcery memory cache populate will now return an error if there is an internal error performing the populate. The CLI command will display an error in this case as well.	9 months ago
phoneben	f79dba52da	Add comment to asterisk.conf.sample clarifying that template sections are ignored Add comment to asterisk.conf.sample clarifying that template sections are ignored. Resolves: #1692	9 months ago
George Joseph	f8d86fb90b	chan_websocket: Use the channel's ability to poll fds for the websocket read. We now add the websocket's file descriptor to the channel's fd array and let it poll for data availability instead if having a dedicated thread that does the polling. This eliminates the thread and allows removal of most explicit locking since the core channel code will lock the channel to prevent simultaneous calls to webchan_read, webchan_hangup, etc. While we were here, the hangup code was refactored to use ast_hangup_with_cause instead of directly queueing an AST_CONTROL_HANGUP frame. This allows us to set hangup causes and generate snapshots. For a bit of extra debugging, a table of websocket close codes was added to http_websocket.h with an accompanying "to string" function added to res_http_websocket.c Resolves: #1683	9 months ago
Sean Bright	d154c09d39	asterisk.c: Allow multi-byte characters on the Asterisk CLI. Versions of libedit that support Unicode expect that the EL_GETCFN (the function that does character I/O) will fill in a `wchar_t` with a character, which may be multi-byte. The built-in function that libedit provides, but does not expose with a public API, does properly handle multi-byte sequences. Due to the design of Asterisk's console processing loop, Asterisk provides its own implementation which does not handle multi-byte characters. Changing Asterisk to use libedit's built-in function would be ideal, but would also require changing some fundamental things about console processing which could be fairly disruptive. Instead, we bring in libedit's `read_char` implementation and modify it to suit our specific needs. Resolves: #60	9 months ago
Sean Bright	2ac08fd8f1	func_presencestate.c: Allow `NOT_SET` to be set from CLI. Resolves: #1647	9 months ago
Peter Krall	98bd9e6bc5	res/ari/resource_bridges.c: Normalize channel_format ref handling for bridge media Always take an explicit reference on the format used for bridge playback and recording channels, regardless of where it was sourced, and release it after prepare_bridge_media_channel. This aligns the code paths and avoids mixing borrowed and owned references while preserving behavior. Fixes: #1648	9 months ago
George Joseph	cf040c25dd	res_geolocation: Fix multiple issues with XML generation. * 3d positions were being rendered without an enclosing `<gml:pos>` element resulting in invalid XML. * There was no way to set the `id` attribute on the enclosing `tuple`, `device` and `person` elements. * There was no way to set the value of the `deviceID` element. * Parsing of degree and radian UOMs was broken resulting in them appearing outside an XML element. * The UOM schemas for degrees and radians were reversed. * The Ellipsoid shape was missing and the Ellipse shape was defined multiple times. * The `crs` location_info parameter, although documented, didn't work. * The `pos3d` location_info parameter appears in some documentation but wasn't being parsed correctly. * The retransmission-allowed and retention-expiry sub-elements of usage-rules were using the `gp` namespace instead of the `gbp` namespace. In addition to fixing the above, several other code refactorings were performed and the unit test enhanced to include a round trip XML -> eprofile -> XML validation. Resolves: #1667 UserNote: Geolocation: Two new optional profile parameters have been added. * `pidf_element_id` which sets the value of the `id` attribute on the top-level PIDF-LO `device`, `person` or `tuple` elements. * `device_id` which sets the content of the `<deviceID>` element. Both parameters can include channel variables. UpgradeNote: Geolocation: In order to correct bugs in both code and documentation, the following changes to the parameters for GML geolocation locations are now in effect: * The documented but unimplemented `crs` (coordinate reference system) element has been added to the location_info parameter that indicates whether the `2d` or `3d` reference system is to be used. If the crs isn't valid for the shape specified, an error will be generated. The default depends on the shape specified. * The Circle, Ellipse and ArcBand shapes MUST use a `2d` crs. If crs isn't specified, it will default to `2d` for these shapes. The Sphere, Ellipsoid and Prism shapes MUST use a `3d` crs. If crs isn't specified, it will default to `3d` for these shapes. The Point and Polygon shapes may use either crs. The default crs is `2d` however so if `3d` positions are used, the crs must be explicitly set to `3d`. * The `geoloc show gml_shape_defs` CLI command has been updated to show which coordinate reference systems are valid for each shape. * The `pos3d` element has been removed in favor of allowing the `pos` element to include altitude if the crs is `3d`. The number of values in the `pos` element MUST be 2 if the crs is `2d` and 3 if the crs is `3d`. An error will be generated for any other combination. * The angle unit-of-measure for shapes that use angles should now be included in the respective parameter. The default is `degrees`. There were some inconsistent references to `orientation_uom` in some documentation but that parameter never worked and is now removed. See examples below. Examples... ``` location_info = shape="Sphere", pos="39.0 -105.0 1620", radius="20" location_info = shape="Point", crs="3d", pos="39.0 -105.0 1620" location_info = shape="Point", pos="39.0 -105.0" location_info = shape=Ellipsoid, pos="39.0 -105.0 1620", semiMajorAxis="20" semiMinorAxis="10", verticalAxis="0", orientation="25 degrees" pidf_element_id = ${CHANNEL(name)}-${EXTEN} device_id = mac:001122334455 Set(GEOLOC_PROFILE(pidf_element_id)=${CHANNEL(name)}/${EXTEN}) ```	9 months ago
George Joseph	736dddfd4b	stasis/control.c: Add destructor to timeout_datastore. The timeout_datastore was missing a destructor resulting in a leak of 16 bytes for every outgoing ARI call. Resolves: #1681	9 months ago
Sean Bright	5748ff750e	func_talkdetect.c: Remove reference to non-existent variables.	9 months ago
Nathaniel Wesley Filardo	2b91d380fc	configure.ac: use AC_PATH_TOOL for nm `nm` might, especially in cross-compilation scenarios, be available but prefixed with the target triple. So: use `AC_PATH_TOOL` rather than `AC_PATH_PROG` to find it. (See https://www.gnu.org/software/autoconf/manual/autoconf-2.68/html_node/Generic-Programs.html .) Found and proposed fix tested by cross-compiling Asterisk using Nixpkgs on x86_64 targeting aarch64. :)	9 months ago
Alexei Gradinari	0c64ee88c6	res_pjsip_mwi: Fix off-nominal endpoint ao2 ref leak in mwi_get_notify_data Delay acquisition of the ast_sip_endpoint reference in mwi_get_notify_data() to avoid an ao2 ref leak on early-return error paths. Move ast_sip_subscription_get_endpoint() to just before first use so all acquired references are properly cleaned up. Fixes: #1675	9 months ago
Maximilian Fridrich	ce036efdd4	res_pjsip_messaging: Add support for following 3xx redirects This commit integrates the redirect module into res_pjsip_messaging to enable following 3xx redirect responses for outgoing SIP MESSAGEs. When follow_redirect_methods contains 'message' on an endpoint, Asterisk will now follow 3xx redirect responses for MESSAGEs, similar to how it behaves for INVITE responses. Resolves: #1576 UserNote: A new pjsip endpoint option follow_redirect_methods was added. This option is a comma-delimited, case-insensitive list of SIP methods for which SIP 3XX redirect responses are followed. An alembic upgrade script has been added for adding this new option to the Asterisk database.	9 months ago
Maximilian Fridrich	d38dcad554	res_pjsip: Introduce redirect module for handling 3xx responses This commit introduces a new redirect handling module that provides infrastructure for following SIP 3xx redirect responses. The redirect functionality respects the endpoint's redirect_method setting and only follows redirects when set to 'uri_pjsip'. This infrastructure can be used by any PJSIP module that needs to handle 3xx redirect responses.	9 months ago
Tinet-mucw	3a79fd8ba6	app_mixmonitor.c: Fix crash in mixmonitor_ds_remove_and_free when datastore is NULL The datastore may be NULL, so a null pointer check needs to be added. Resolves: #1673	9 months ago
Sven Kube	a95382f5e0	res_pjsip_refer: don't defer session termination for ari transfer Allow session termination during an in progress ari handled transfer.	9 months ago
Naveen Albert	5dfddff022	chan_dahdi.conf.sample: Avoid warnings with default configs. callgroup and pickupgroup may only be specified for FXO-signaled channels; however, the chan_dahdi sample config had these options uncommented in the [channels] section, thus applying these settings to all channels, resulting in warnings. Comment these out so there are no warnings with an unmodified sample config. Resolves: #1552	9 months ago
sarangr7	85dab28a47	main/dial.c: Set channel hangup cause on timeout in handle_timeout_trip When dial attempts timeout in the core dialing API, the channel's hangup cause was not being set before hanging up. Only the ast_dial_channel structure's internal cause field was updated, but the actual ast_channel hangup cause remained unset. This resulted in incorrect or missing hangup cause information being reported through CDRs, AMI events, and other mechanisms that read the channel's hangup cause when dial timeouts occurred via applications using the dialing API (FollowMe, Page, etc.). The fix adds proper channel locking and sets AST_CAUSE_NO_ANSWER on the channel before calling ast_hangup(), ensuring consistent hangup cause reporting across all interfaces. Resolves: #1660	9 months ago
Sean Bright	9ea0c29165	cel: Add missing manager documentation. The LOCAL_OPTIMIZE_BEGIN, STREAM_BEGIN, STREAM_END, and DTMF CEL events were not all documented in the CEL configuration file or the manager documentation for the CEL event.	9 months ago
Sean Bright	e4190f2048	res_odbc: Use SQL_SUCCEEDED() macro where applicable. This is just a cleanup of some repetitive code.	9 months ago
Justin T. Gibbs	c9ab73ce8d	rtp/rtcp: Configure dual-stack behavior via IPV6_V6ONLY Dual-stack behavior (simultaneous listening for IPV4 and IPV6 connections on a single socket) is required by Asterisk's ICE implementation. On systems with the IPV6_V6ONLY sockopt, set the option to 0 (dual-stack enabled) when binding to the IPV6 any address. This ensures correct behavior regardless of the system's default dual-stack configuration.	9 months ago
Sean Bright	861fa372ae	http.c: Include remote address in URI handler message. Resolves: #1662	9 months ago
Joshua C. Colp	6965e96751	pjsip: Move from threadpool to taskpool This change moves the PJSIP module from the threadpool API to the taskpool API. PJSIP-specific implementations for task usage have been removed and replaced with calls to the optimized taskpool implementations instead. The need for a pool of serializers has also been removed as taskpool inherently provides this. The default settings have also been changed to be more realistic for common usage. UpgradeNote: The threadpool_* options in pjsip.conf have now been deprecated though they continue to be read and used. They have been replaced with taskpool options that give greater control over the underlying taskpool used for PJSIP. An alembic upgrade script has been added to add these options to realtime as well.	9 months ago
phoneben	2c9cc98954	Disable device state caching for ephemeral channels chan_audiosocket/chan_rtp/res_stasis_snoop: Disable device state caching for ephemeral channels Resolves: #1638	9 months ago
George Joseph	04cef282c5	chan_websocket: Add locking in send_event and check for NULL websocket handle. On an outbound websocket connection, when the triggering caller hangs up, webchan_hangup() closes the outbound websocket session and sets the websocket session handle to NULL. If the hangup happened in the tiny window between opening the outbound websocket connection and before read_thread_handler() was able to send the MEDIA_START message, it could segfault because the websocket session handle was NULL. If it didn't actually segfault, there was also the possibility that the websocket instance wouldn't get cleaned up which could also cause the channel snapshot to not get cleaned up. That could cause memory leaks and `core show channels` to list phantom WebSocket channels. To prevent the race, the send_event() macro now locks the websocket_pvt instance and checks the websocket session handle before attempting to send the MEDIA_START message. Resolves: #1643 Resolves: #1645	9 months ago
phoneben	8c6607f1f0	Fix false null-deref warning in channel_state Resolve analyzer warning in channel_state by checking AST_FLAG_DEAD on snapshot, which is guaranteed non-NULL. Resolves: #1430	9 months ago
George Joseph	fe8ff19f87	endpoint.c: Plug a memory leak in ast_endpoint_shutdown(). Commit `26795be` introduced a memory leak of ast_endpoint when ast_endpoint_shutdown() was called. The leak occurs only if a configuration change removes an endpoint and isn't related to call volume or the length of time asterisk has been running. An ao2_ref(-1) has been added to ast_endpoint_shutdown() to plug the leak. Resolves: #1635	9 months ago
Sean Bright	2ff9480df5	Revert "func_hangupcause.c: Add access to Reason headers via HANGUPCAUSE()" This reverts commit `5177662990`. For rationale, see #1621 and #1606	9 months ago
Paul Donald	99faacf016	configs: rename phoneprov_users.conf to .sample so make installs it This conf file should be suffixed .sample so that make installs it at compile time. Otherwise res_phoneprov complains at runtime as to its absence and refuses to start. Fixes: #1626	9 months ago
Sean Bright	a64e18c7fe	cel_manager.c: Correct manager event mask for CEL events. There is no EVENT_FLAG_CEL and these events are raised with as EVENT_FLAG_CALL.	9 months ago
Sean Bright	6950d1fe83	app_queue.c: Update docs to correct QueueMemberPause event name.	9 months ago
Mike Bradeen	8eef0b6c9f	taskprocessors: Improve logging and add new cli options This change makes some small changes to improve log readability in addition to the following changes: Modified 'core show taskprocessors' to now show Low time and High time for task execution. New command 'core show taskprocessor name <taskprocessor-name>' to dump taskprocessor info and current queue. Addionally, a new test was added to demonstrate the 'show taskprocessor name' functionality: test execute category /main/taskprocessor/ name taskprocessor_cli_show Setting 'core set debug 3 taskprocessor.c' will now log pushed tasks. (Warning this is will cause extremely high levels of logging at even low traffic levels.) Resolves: #1566 UserNote: New CLI command has been added - core show taskprocessor name <taskprocessor-name>	9 months ago

1 2 3 4 5 ...

34339 Commits (4f17e66aad9192de4205dbeb0e31d2003eff6706) All Branches Search

34339 Commits (4f17e66aad9192de4205dbeb0e31d2003eff6706)

All Branches