Fixed a bug that originally would show a negative number of
active calls occuring in Asterisk. A gauge is persistent so
incrementing and decrementing it results in a more consistent
performance. Also changed to the call to StatsD to use
ast_statsd_log_string() so that a "+" could be sent to StatsD.
ASTERISK-25619 #close
Change-Id: Iaaeff5c4c6a46535366b4d16ea0ed0ee75ab2ee7
Both transport and endpoint now check for the existence and readability
of tls certificate and key files before passing them on to pjproject.
This will cause the object to not load rather than waiting for pjproject
to discover that there's a problem when a session is attempted.
NOTE: chan_sip also uses ast_rtp_dtls_cfg_parse but it's located
in build_peer which is gigantic and I didn't want to disturb it.
Error messages will emit but it won't interrupt chan_sip loading.
ASTERISK-25618 #close
Change-Id: Ie43f2c1d653ac1fda6a6f6faecb7c2ebadaf47c9
Reported-by: George Joseph
Tested-by: George Joseph
See ASTERISK-25615.
If the transport protocol is tls and async_operations > 1, pjproject
will segfault if more than one operation is attempted on the same socket.
Until this is fixed upstream, a check has been added to throw an error
if a tls transport config has async_operations set to > 1.
ASTERISK-25615
Change-Id: I76b9a5b2a5a0054fe71ca5851e635f2dca7685a6
Reported-by: George Joseph
Tested-by: George Joseph
It will never be perfect or even pretty, mostly because of the differences
between static and dynamic contacts.
Created:
Can't use the contact or contact_status alloc functions
because the objects come and go regardless of the actual state.
Can't use the contact_apply_handler, ast_sip_location_add_contact or
a sorcery created handler because they only get called for dynamic
contacts. Similarly, permanent_uri_handler only gets called for
static contacts.
So, Matt had it right. :) ast_res_pjsip_find_or_create_contact_status is
the only place it can go and not have duplicated code. Both
permanent_uri_handler and contact_apply_handler call find_or_create.
Removed:
Can't use the destructors for the same reason as above. The only
place to put this is in persistent_endpoint_contact_deleted_observer
which I believe is the "correct" place but even that will handle only
dynamic contacts. This doesn't called on shutdown however. There is
no hook to use for static contacts that may be removed because of a
config change while asterisk is in operation.
I moved the cleanup of contact_status from ast_sip_location_delete_contact
to the handler as well.
Status Change and RTT:
Although they worked fine where they were (in update_contact_status) I
moved them to persistent_endpoint_contact_status_observer to make it
more consistent with removed. There was logic there already to detect
a state change.
Finally, fixed a nit in permanent_uri_handler rmudgett reported
eralier.
ASTERISK-25608 #close
Change-Id: I4b56e7dfc3be3baaaf6f1eac5b2068a0b79e357d
Reported-by: George Joseph
Tested-by: George Joseph
Beside that, the format-attribute module sends only non-default values in the
line fmtp, now. This avoids unnecessary overhead in SDP messages. Furthermore,
previously the parameter stereo was not parsed when being the first parameter.
ASTERISK-25583 #close
Change-Id: Iae85ba3e5960bfd5d51cf65bcffad00dd4875a73
When 90d9a70789 was merged, it mostly tested dynamic contacts created as
a result of registering a PJSIP endpoint. Contacts generated in this
fashion typically have a long alphanumeric string as their object identifier,
which maps reasonably well for StatsD. Unfortunately, this doesn't work in the
general case. StatsD treats both '.' and ':' characters as special characters.
In particular, having a ':' appear in the middle of a StatsD metric will
result in the metric being rejected.
This causes some obvious issues with SIP URIs.
The StatsD API should not be responsible for escaping the metric name passed
to it. The metric is treated as a single long string, and it would be
challenging to know what to escape in the string passed to the function.
Likewise, we don't want to escape the metric in PJSIP, as that involves
overhead that is wasted when either res_statsd isn't loaded or enabled.
This patch takes an alternative approach. The Contact ID has been changed
to be "aor@@uri_hash" instead of "aor@@uri". This (a) won't contain any of the
aforementioned special characters, (b) can be done on Contact creation,
which has minimal impact on run-time performance, and (c) also conforms to an
earlier commit that changed the ID for dynamic contacts.
The downside of this is that StatsD users will have to map SHA1 hashes back to
the Contacts that are emitting the statistics. To that end, the CLI commands
have been updated to include the first 10 characters of the MD5 hash, which
should be enough to match what is shown in Graphite (or some other StatsD
backend).
ASTERISK-25595 #close
Change-Id: Ic674a3307280365b4a45864a3571c295b48a01e2
Reported-by: Matt Jordan
Tested-by: George Joseph
An earlier commit changed the id of dynamic contacts to contain
a hash instead of the uri. This patch updates status change
logging to show the aor/uri instead of the id. This required
adding the aor id to contact and contact_status and adding
uri to contact_status. The aor id gets added to contact and
contact_status in their allocators and the uri gets added to
contact_status in pjsip_options when the contact_status is
created or updated.
ASTERISK-25598 #close
Reported-by: George Joseph
Tested-by: George Joseph
Change-Id: I56cbec1d2ddbe8461367dd8b6da8a6f47f6fe511
The fastagi record-file testsuite test sometimes fails reporting an empty
recorded file. This was happening because Asterisk was sending the agi result
notification prior to actually closing the file and the data, being buffered,
had not been written to the file yet when the test attempts to check the file
size.
This patch makes it so the record file stream is closed prior to sending the
agi result notification.
ASTERISK-25593 #close
Change-Id: I6b2b3be3ae37f7c7b18e672c419a89b3b8513cde
The usage info for 'pjsip send notify' previously referenced the
chan_sip configuration sip_notify.conf. Fix this to reference
the correct configuration pjsip_notify.conf.
ASTERISK-25590 #close
Change-Id: I3898271a8e8a8b1db201741e790ebe2c6bf5cdea
If the sorcery object type is not found a NULL is returned.
Unfortunately, sorcery_realtime_filter_objectset() will crash after
complaining about not finding the object type and saying to expect errors.
* Use ao2_cleanup() instead of ao2_ref() to prevent the crash.
ASTERISK-25165
Reported by Corey Farrell
Change-Id: Ic3b64453ea3058cb68d5c26d97d4fe7b8eea2e97
When a channel is in a direct media bridge, a re-INVITE may arrive that forces
Asterisk to re-negotiate the media to a T.38 fax. When this occurs, the bridge
must change its technology to a simple bridge, and re-INVITE the media back
to Asterisk.
Generally, this logic mostly already exists in Asterisk. However, prior to this
patch, there were a few bugs:
(1) The T.38 framehook currently prevents a channel capable of T.38 faxes from
ever entering into a direct media bridge. This applies even when the only
media being passed over the channel is audio. This patch fixes this bug
by having the framehook specify that it defers caring about any frame type.
This allows the channels to enter into a direct media bridge, which will
be broken when a re-INVITE is received.
(2) When a re-INVITE is received, nothing instructed the bridging layer to
re-inspect the allowed bridging technology. This now occurs when either
a re-INVITE is received from a peer, or when a response is received from
the far end (that is, when the T.38 state changes to either
T38_PEER_REINVITE or T38_LOCAL_REINVITE).
(3) chan_pjsip needs to do a small amount of work to prevent a direct media
bridge from being chosen when a T.38 session is in progress. When a T.38
session supplement has a t38 datastore - which is added when we detect
we should start thinking about T.38 on a channel - we now refuse a native
RTP bridge.
(4) When a BYE request is received, we don't terminate the T.38 session. If
the other side of a T.38 fax survives the hangup (due to the 'g' flag
in Dial, for example), we don't currently re-INVITE the media on the
other channel back to audio. This patch now has res_pjsip_t38 intercept
BYE requests and inform the far side that the T.38 session is terminated.
This naturally causes the correct re-INVITEs to be sent.
ASTERISK-25582
Change-Id: Iabd6aa578e633d16e6b9f342091264e4324a79eb
This patch adds some debug statements to res_pjsip_t38. These statements help
to determine which SDP negotiation callbacks are being executed, and, when
a particular callback exits, why a callback may not have applied its logic
to the local or remote SDP.
Change-Id: I61b3fb9183b7ebbb5da8e9f48b59a5d9d7042d77
This patch adds a module that emits StatsD statistics about Asterisk
endpoints. This includes:
* A GUAGE statistic for endpoint states, tracking how many endpoints are in
a particular state.
* A GUAGE statistic for each endpoint, counting the number of channels
currently associated with an endpoint.
ASTERISK-25572
Change-Id: If7e1333c5aeda8d136850b30c2101c0ee1c97305
This patch adds the ability to send StatsD statistics related to the
state of PJSIP contacts. This includes:
* A GUAGE statistic measuring the count of contacts in a particular state.
This measures how many contacts are reachable, unreachable, etc.
* The RTT time for each contact, if those contacts are qualified. This
provides StatsD engines useful time-based data about each contact.
ASTERISK-25571
Change-Id: Ib8378d73afedfc622be0643b87c542557e0b332c
This patch adds outbound registration statistics for StatsD. This includes
the following:
* A GUAGE metric for the overall count of outbound registrations.
* A GUAGE metric for each state an outbound registration can be in. As the
outbound registrations change state, the overall count of how many
outbound registrations are in the particular state is changed.
These statistics are particularly useful for systems with a large number of
SIP trunks, and where measuring the change in state of the trunks is useful
for monitoring.
ASTERISK-25571
Change-Id: Iba6ff248f5d1c1e01acbb63e9f0da1901692eb37
When Asterisk is configured to use a dynamic sorcery backend (such as
res_sorcery_astdb) with 'registration' objects, it will fail to create the
internal state objects associated with the registration objects on module
load. This is due to nothing actually querying for the specific objects
and calling their sorcery apply handler during module load.
This patch fixes that by calling get_registrations in the sorcery observer's
object_type_loaded handler. Doing this causes the sorcery backends to be
asked for the current state of all registration objects, which causes the
apply handler to be called and the internal run-time state to be created.
ASTERISK-25575 #close
Change-Id: Ie9306e797098c6d4da7bcf4a5434a15891508b23
When no parameter is present, Asterisk does not generate the line fmtp, as
expected. However, because a buffer was reset, even rtpmap and fmtp of previous
media codecs got removed. Now, Asterisk does not reset other codecs in case of
no parameter for H.264.
ASTERISK-25573 #close
Change-Id: I93811331f4a28c45418a9e14ee46c0debd47a286
Often, the metric names of statistics we are generating for StatsD have some
dynamic component to them. This can be the name of a particular resource, or
some internal status label in Asterisk. With the current set of functions,
callers of the statsd API must first build the metric name themselves, then
pass this to the API functions. This results in a large amount of boilerplate
code and usage of either fixed length static buffers or dynamic memory
allocation, neither of which is desireable.
This patch adds two new functions to the StatsD API that support a printf
style format specifier for constructing the metric name. A dynamic string,
allocated in threadstorage, is used to build the metric name. This eases
the burden on users of the StatsD API.
Change-Id: If533c72d1afa26d807508ea48b4d8c7b32f414ea
Receiving a 423 Interval Too Brief response after authentication for an
outbound registration attempt results in assuming that the registrar has
rejected the registration permanently. If there are no configured retries
for fatal responses then the outbound registration is stopped for that
endpoint.
For registrations, PJSIP/PJPROJECT intercepts the handling of 423
responses and does not include any authentication in the updated
registration request. When the updated request is challenged then the
Asterisk code assumes that we were challenged again because the peer
rejected the authentication we sent earlier.
* Made registration challenges keep track of the CSeq number to determine
if the received challenge response was for the request we thought we sent.
If the response's CSeq number differs from the CSeq number we last sent
with authentication then authenticate again because it is a challenge to a
different request.
Change-Id: I81b4bd36d1be095bab606e34b8b44e6302971b09
Added a new api to res_statsd.c to allow it to receive a
character pointer for the value argument. This allows for a
'+' and a '-' to easily be sent with the value.
ASTERISK-25419
Reported By: Ashley Sanders
Change-Id: Id6bb53600943d27347d2bcae26c0bd5643567611
When a request is sent using pjsip_endpt_send_request and fails, a condition
exists where the request wrapper, which is an AO2 object, may be de-ref'd
more times than it should. This occurs when the request's callback is called,
and, in the callback, the timer on the PJSIP heap is cancelled. When that
occurs, the request wrapper's lifetime is decremented. When
pjsip_endpt_send_request fails, we unilaterally decrement the lifetime of
the request wrapper again, even though we've already cancelled the reference
associated with the timer.
This patch checks the return result of pj_timer_heap_cancel_if_active before
removing the reference associated with the timer. We now only decrement it
in this case if a timer is cancelled as a result of the function call.
Change-Id: I21332343a1a019c1117076f9bf2df27be2850102
If an authenticated incoming caller does not respond to our 200 OK INVITE
response with an ACK then PJSIP will hangup the call. Unfortunately,
there is a chance that the session's channel will go away between one use
of the channel pointer and another when building the BYE request because
the BYE is being built by the monitor thread and not the call's serializer
thread.
* Added a check to ensure that the thread trying to add the Reason header
is the call's serializer thread. This ensures that the channel will not
go away on us.
Change-Id: I866388d2b97ea2032eaae3f3ab3f1ca6cbd2df89
In practical tests, we have seen certain taskprocessors, specifically
Stasis subscription taskprocessors, cross the recently-added high-water
mark and emit a warning. This high-water mark warning is only intended
to be emitted when things have tanked on the system and things are
heading south quickly. In the practical tests, the Stasis taskprocessors
sometimes had a max depth of 180 tasks in them, and Asterisk wasn't in
any danger at all.
As such, this ups the high-water mark to 500 tasks instead. It also
redefines the SIP threadpool request denial number to be a multiple of
the taskprocessor high-water mark.
Change-Id: Ic8d3e9497452fecd768ac427bb6f58aa616eebce
When the SIP threadpool is backed up with tasks, we send 503 responses
to ensure that we don't try to overload ourselves. The problem is that
we were not insuring that we were not trying to send a 503 to an
incoming SIP response.
This change makes it so that we only send the 503 on incoming requests.
Change-Id: Ie2b418d89c0e453cc6c2b5c7d543651c981e1404
We have observed situations where the SIP threadpool may become
deadlocked. However, because incoming traffic is still arriving, the SIP
threadpool's queue can continue to grow, eventually running the system
out of memory.
This change makes it so that incoming traffic gets rejected with a 503
response if the queue is backed up too much.
Change-Id: I4e736d48a2ba79fd1f8056c0dcd330e38e6a3816
When ASTERISK-25449 was closed, a number of scheduler issues mentioned in
the comments were missed. These have since beed raised in ASTERISK-25476
and elsewhere.
This patch attempts to collect all of the scheduler issues discovered so
far and address them sensibly.
ASTERISK-25476 #close
Change-Id: I87a77d581e2e0d91d33b4b2fbff80f64a566d05b
In SIP/SDP, Opus has two channels always (see RFC 7587 section 7). The actual
amount of channels is negotiated in-band. Therefore now, the Opus codec and its
attribute rtpmap are registered with two channels.
ASTERISK-24779 #close
Reported by: PowerPBX
Tested by: Alexander Traud
patches:
asterisk-24779.patch submitted by Sean Bright (license #5060)
Change-Id: Ic7ac13cafa1d3450b4fa4987350924b42cbb657b
The contact_status Sorcery objects are currently not destroyed when a contact
is deleted. This causes the contact's last known RTT/status to be 'sticky'
when the contact itself may no longer exist. This patch causes the
contact_status objects associated with both dynamic and static contacts to
be destroyed if the AoR holding those contacts is also destroyed (or via
other paths where a contact may be deleted.)
Change-Id: I7feec8b9278cac3c5263a4c0483f4a0f3b62426e
When an endpoint is deleted (such as through an API), the persistent endpoint
currently continues to lurk around. While this isn't harmful from a memory
consumption perspective - as all persistent endpoints are reclaimed on
shutdown - it does cause Stasis endpoint related operations to continue
to believe that the endpoint may or may not exist.
This patch causes the persistent endpoint related to a PJSIP endpoint to be
destroyed if the PJSIP endpoint is deleted.
Change-Id: I85ac707b4d5e6aad882ac275b0c2e2154affa5bb
During a stress test of subscriptions, a huge blast of
subscription-related traffic resulted in the threadpool expanding to a
ridiculous number of threads. The balooning of threads resulted in an
increase of memory, which led to a crash due to being out of memory.
An easy fix for the particular test was to limit the size of the
threadpool, thus reining in the amount of memory that would be used. It
was decided that there really is no downside to having a non-infinite
default value for the maximum size of the threadpool, so this change
introduces 50 threads as the maximum threadpool size for the SIP
threadpool.
ASTERISK-25513 #close
Reported by John Bigelow
Change-Id: If0b9514f1d9b172540ce1a6e2f2ffa1f2b6119be
When an AoR is created or destroyed dynamically, the scheduled OPTIONS
requests that qualify the contacts on the AoR are not necessarily started
or destroyed, particularly for persistent contacts created for that AoR.
This patch adds create/update/delete sorcery observers for an AoR, which
schedule/unschedule the qualifies as expected.
Change-Id: Ic287ed2e2952a7808ee068776fe966f9554bdf7d
When compiled with assertions enabled one will occur when destroying
the subscription tree when UAS dialog creation fails. This is because
the code assumes that a dialog will always exist on a subscription
tree when in reality during this specific scenario it won't.
This change makes it so a dialog is not removed from the subscription
tree if it is not present.
ASTERISK-25505 #close
Change-Id: Id5c182b055aacc5e66c80546c64804ce19218dee
Add the ability to filter output from pjsip list and show commands
using the "like" predicate like chan_sip.
For endpoints, aors, auths, registrations, identifyies and transports,
the modification was a simple change of an ast_sorcery_retrieve_by_fields
call to ast_sorcery_retrieve_by_regex. For channels and contacts a
little more work had to be done because neither of those objects are
true sorcery objects. That was just removing the non-matching object
from the final container. Of course, a little extra plumbing in the
common pjsip_cli code was needed to parse the "like" and pass the regex
to the get_container callbacks.
Some of the get_container code in res_pjsip_endpoint_identifier was also
refactored for simplicity.
ASTERISK-25477 #close
Reported by: Bryant Zimmerman
Tested by: George Joseph
Change-Id: I646d9326b778aac26bb3e2bcd7fa1346d24434f1
During outbound registration it is possible to receive a fatal (any permanent/
non-temporary 4xx, 5xx, 6xx) response from the registrar that is simply due
to a problem with the registrar itself. Upon receiving the failure response
Asterisk terminates outbound registration for the given endpoint.
This patch adds an option, 'fatal_retry_interval', that when set continues
outbound registration at the given interval up to 'max_retries' upon receiving
a fatal response.
ASTERISK-25485 #close
Change-Id: Ibc2c7b47164ac89cc803433c0bbe7063bfa143a2
A certain situation can result in our attempting to send a NOTIFY on a
destroyed dialog. Say we attempt to send a NOTIFY to a subscriber, but
that subscriber has dropped off the network. We end up retransmitting
that NOTIFY until the appropriate SIP timer says to destroy the NOTIFY
transaction. When the pjsip evsub code is told that the transaction has
been terminated, it responds in kind by alerting us that the
subscription has been terminated, destroying the subscription, and then
removing its reference to the dialog, thus destroying the dialog.
The problem is that when we get told that the subscription is being
terminated, we detect that we have not sent a terminating NOTIFY
request, so we queue up such a NOTIFY to be sent out. By the time that
queued NOTIFY gets sent, the dialog has been destroyed, so attempting to
send that NOTIFY can result in a crash.
The fix being introduced here is actually a reintroduction of something
the pubsub code used to employ. We hold a reference to the dialog and
wait to decrement our reference to the dialog until our subscription
tree object is destroyed. This way, we can send messages on the dialog
even if the PJSIP evsub code wants to terminate earlier than we would
like.
In doing this, some NULL checks for subscription tree dialogs have been
removed since NULL dialogs are no longer actually possible.
Change-Id: I013f43cddd9408bb2a31b77f5db87a7972bfe1e5
When sending a NOTIFY, we lock the dialog and then unlock the dialog
when finished. A recent change made it so that the subscription tree's
dialog pointer will be set NULL when sending the final NOTIFY request
out. This means that when we attempt to unlock the dialog, we pass a
NULL pointer to pjsip_dlg_dec_lock(). The result is that the dialog
remains locked after we think we have unlocked it. When a response to
the NOTIFY arrives, the monitor thread attempts to lock the dialog, but
it cannot because we never released the dialog lock. This results in
Asterisk being unable to process incoming SIP traffic any longer.
The fix in this patch is to use a local pointer to save off the pointer
value of the subscription tree's dialog when locking and unlocking the
dialog. This way, if the subscription tree's dialog pointer is NULLed
out, the local pointer will still have point to the proper place and the
dialog lock will be unlocked as we expect.
Change-Id: I7ddb3eaed7276cceb9a65daca701c3d5e728e63a
The SIP dialog is removed from the subscription tree when the final
NOTIFY is sent. However, after the final NOTIFY is sent, the persistence
update function still attempts to access the cseq from the dialog,
resulting in a crash.
This fix removes the subscription persistence at the same time that the
dialog is removed from the subscription tree. This way, there is no
attempt to update persistence when the subscription is being destroyed.
Change-Id: Ibb46977a6cef9c51dc95f40f43446e3d11eed5bb
There have been crashes seen where a taskprocessor's listener is NULL
unexpectedly.
Looking at backtraces, the problem was specifically seen in PJSIP
serializers.
Subscriptions make the mistake of removing a serializer from a dialog
during subscription tree destruction. Since subscription trees are
reference-counted, guaranteeing the circumstances behind the destruction
are not possible. This makes it so that the dialog serializer can be
removed while not holding the dialog lock. This makes it possible for
the distributor to get a pointer to the dialog serializer and have that
serializer get freed out from under it.
The fix for this is to remove the serializer from a subscription dialog
when sending the final NOTIFY. This guarantees that the serializer is
removed with the dialog lock held. By doing this, we guarantee that if
the distributor gains access to the dialog's serializer, it will not be
possible for the serializer to get freed by another thread.
Change-Id: I21f5dac33529f65cec45679bdace60670800ff66
If an old persistent subscription is recreated but then immediately
destroyed because it is out of date, the subscription tree will have no
leaf subscriptions on it. This was resulting in a crash when attempting
to destroy the subscription tree.
A simple NULL check fixes this problem.
Change-Id: I85570b9e2bcc7260a3fe0ad85904b2a9bf36d2ac
There have been crashes and general instability seen in the pubsub code,
so this patch introduces three changes to increase the stability.
First, the ownership model for subscriptions has been modified. Due to
RLS, subscriptions are stored in memory as a tree structure. Prior to my
patch, the PJSIP subscription was the owner of the subscription tree.
When the PJSIP subscription told us that it was terminating, we started
destroying the subscription tree along with all of the individual leaf
subscriptions that belong to the tree. The problem with this model is
that the two actors in play here, the PJSIP subscription and the
individual leaf subscriptions, need to have joint ownership of the
subscription tree. So now, the PJSIP subscription and the individual
leaf subscriptions each have a reference to the subscription tree. This
way, we will not actually free memory until no players are left that
care. The PJSIP subscription is a bigger stakeholder, in that if the
PJSIP subscription's reference to the subscription tree is removed, the
subscription tree instructs the leaf subscriptions to shut down and drop
their references to the subscription tree when possible. The individual
leaf subscriptions, upon being told to shut down, can drop their stasis
subscriptions or whatever they use to learn of new state, and then drop
their reference to the subscription tree once they are ready to die.
Second, the lifetime of a PJSIP subscription's reference to our
subscription tree has been altered. As I learned from doing a deep dive,
the PJSIP evsub code can tell Asterisk multiple times that the
subscription has been terminated, and not all of these times
are especially helpful. I have altered the message flow that we use for
SIP subscriptions such that we will always drop the PJSIP subscription's
reference to the subscription tree when we send the NOTIFY that
terminates a SIP subscription. This also means that we will now queue
NOTIFY requests to be sent after responding to incoming SUBSCRIBEs so
that we can have predictable state changes from the PJSIP evsub code.
Third, the synchronization of operations has been improved. PJSIP can
call into our code from a serializer thread (e.g. upon receiving an
incoming request) or from the monitor thread (e.g. when a subscription
times out). Because of this, there is the possibility of competing
threads stepping on each other. PJSIP attempts to do some
synchronization on its own by always keeping the dialog lock held when
it calls into us. However, since we end up pushing tasks into the
serializer, the result was that serialized operations were not grabbing
the dialog lock and could, as a result, step on something that was being
attempted by a different thread. Now we ensure that serialized
operations grab the dialog lock, then check for extenuating
circumstances, then proceed with their operation if they can.
Change-Id: Iff2990c40178dad9cc5f6a5c7f76932ec644b2e5
In a realtime based system with a limited number of threadpool threads
it is possible for a deadlock to occur. This happens when permanent
endpoint state is updated, which will cause database queries to be done.
These queries may result in URI validation being done which is done
synchronously using a PJSIP thread. If all PJSIP threads are in use
processing traffic they themselves may be blocked waiting to get the
permanent endpoint container lock when identifying an endpoint.
This change moves URI validation to occur at use time instead of
configuration time. While this comes at a cost of not seeing a problem
until you use it it does solve the underlying deadlock problem.
ASTERISK-25486 #close
Change-Id: I2d7d167af987d23b3e8199e4a68f3359eba4c76a
On v13, loading several thousand PJSIP endpoints on Asterisk start causes
a deadlock most of the time.
Thanks to mdu113 for discovering that there was a call to pgsql_exec() not
protected by the pgsql_lock reentrancy lock.
{quote}
I believe a code path exists that attempts to use pgsql connection without
locking pgsql_lock. I believe what happens during that deadlock that I
see is two concurrent threads are both attempting to send query to pgsql,
one of the thread is using a code path without locking pgsql_lock. If
they managed to send queries at the same time, it seems postgres ignores
one of the queries and replies only to the one of them. If it happens so
that the thread holding the lock didn't receive the reply it will wait for
it (and hold the lock) forever (or at least for very long time), thus
completely blocking all access to db.
{quote}
* Added missing reentrancy locking around pgsql_exec() in find_table().
* Moved unlock of pgsql_lock in unload_module() to avoid locking inversion
between the psql_tables list lock and the pgsql_lock.
ASTERISK-25455 #close
Reported by: mdu113
Patches:
res_config_pgsql.c-connlock2.diff (license #5543) patch uploaded by mdu113
Change-Id: Id9e7cdf8a3b65ff19964b0cf942ace567938c4e2
The struct send_request_wrapper has a pjsip lock associated with it that
is created non-recursive. There is a code path for the struct
send_request_wrapper lock that will attempt to lock it recursively. The
reporter's deadlock showed that the thread calling endpt_send_request()
deadlocked itself right after the wrapper object got created.
Out-of-dialog requests such as MESSAGE, qualify OPTIONS, and unsolicited
MWI NOTIFY messages can hit this deadlock.
* Replaced the struct send_request_wrapper pjsip lock with the mutex lock
that can come with an ao2 object since all of Asterisk's mutexes are
recursive. Benefits include removal of code maintaining the pjsip
non-recursive lock since ao2 objects already know how to maintain their
own lock and the lock will show up in the CLI "core show locks" output.
ASTERISK-25435 #close
Reported by: Dmitriy Serov
Change-Id: I458e131dd1b9816f9e963f796c54136e9e84322d
In ast_rtp_read, the value of the variable 'mark' which we try to assign to a
frame->subclass.frame_ending may be 0, 1 or (1<<23), but we should translate
it to 0 or 1.
ASTERISK-25451 #close
Change-Id: I53bdf5c026041730184a6a809009c028549ce626
When we decide we will no longer schedule an RTCP write, we remove the
reference to the RTP instance, then assign -1 to the stored scheduler ID
in case something else comes along and wants to see if anything is scheduled.
That scheduler ID is on the RTP instance. After 60a9172d7e was merged to
fix the regression introduced by 3cf0f29310, this improper assignment on a
potentially destroyed object started getting tripped on the build agents.
Frankly, this should have been crashing a lot more often earlier. I can only
assume that the timing was changed just enough by both changes to start
actually hitting this problem.
As it is, simply moving the assignment prior to the ao2 deference is sufficient
to keep the RTP instance from being referenced when it is very, truly,
aboslutely dead.
(Note that it is still good practice to assign -1 to the scheduler ID when we
know we won't be scheduling it again, as the ao2 deref *may* not always destroy
the ao2 object.)
ASTERISK-25449
Change-Id: Ie6d3cb4adc7b1a6c078b1c38c19fc84cf787cda7
Apparently some endpoints attempt to send a reINVITE before completing the
initial INVITE transaction. In this case PJSIP responds appropriately to
the reINVITE with a 491 INVITE request pending. Unfortunately chan_pjsip
is using the initial INVITE transaction state to determine if an INVITE is
the initial INVITE or a reINVITE. Since the initial INVITE transaction
has not been confirmed yet chan_pjsip thinks the reINVITE is an initial
INVITE and starts another PBX thread on the channel. The extra PBX thread
ensures that hilarity ensues.
* Fix checks for a reINVITE on incoming requests to look for the presence
of a to-tag instead of the initial INVITE transaction state.
* Made caller_id_incoming_request() determine what to do if there is a
channel on the session or not. After a channel is created it is too late
to just store the new party id on the session because the session's party
id has already been copied to the channel's caller id.
ASTERISK-25404 #close
Reported by: Chet Stevens
Change-Id: Ie78201c304a2b13226f3a4ce59908beecc2c68be
When 5c713fdf18 was merged, it allowed for scheduled items to have an ID of
'0' returned. While this was valid per the documentation for the API, it was
apparently never returned previously. As a result, several users of the
scheduler API viewed the result as being invalid, causing them to reschedule
already scheduled items or otherwise fail in interesting ways.
This patch corrects the users such that they view '0' as valid, and a returned
ID of -1 as being invalid.
Note that the failing HEP RTCP tests now pass with this patch. These tests
failed due to a duplicate scheduling of the RTCP transmissions.
ASTERISK-25449 #close
Change-Id: I019a9aa8b6997584f66876331675981ac9e07e39
A deadlock can happen when a sorcery object is being expired from the
memory cache when at the same time another object is being placed into the
memory cache. There are a couple other variations on this theme that
could cause the deadlock. Basically if an object is being expired from
the sorcery memory cache at the same time as another thread tries to
update the next object expiration timer the deadlock can happen.
* Add a deadlock avoidance loop in expire_objects_from_cache() to check if
someone is trying to remove the scheduler callback from the scheduler.
ASTERISK-25441 #close
Change-Id: Iec7b0bdb81a72b39477727b1535b2539ad0cf4dc
Make sorcery_memory_cache_close() call remove_all_from_cache() instead of
partially inlining it.
ASTERISK-25441
Change-Id: I1aa6cb425b1a4307096f3f914d17af8ec179a74c
Basically you should shutdown in the opposite order of how you setup since
later setup pieces likely depend on earlier setup pieces. e.g.,
Registering your external API with the rest of the system should be the
last thing setup and the first thing unregistered during shutdown.
Change-Id: I5715765b723100c8d3c2642e9e72cc7ad5ad115e
In practice the set_role API callback can be invoked even
when no ICE is present on an RTP instance. This can occur
if ICE has not been enabled on it.
ASTERISK-25438 #close
Change-Id: I0e17e4316f0f0d7f095c78c3d4fd73a913b6ba69
* Now conf_alloc() has more off nominal error checking.
* Eliminated RAII_VAR() use in conf_alloc().
* Eliminated a dubius shortcut when destroying cfg->general in
conf_destructor() that would cause a crash if cfg->general failed to get
allocated.
* Add some ACO registration section comments.
Change-Id: Ia40c2b1b2d0777d641605118ae019c5a73865e1a
Need to finish initializing the string fields in the ao2 object before
putting any default strings into them.
ASTERISK-25383 #close
Reported by: yaron nahum
Change-Id: I9f7f3a03f0c4991a01593abf8697b9a587c0ea84
When b99a705262 was merged, subscribing to a
NULL bridge will now cause app_subscribe_bridge to implicitly subscribe to
all bridges. Unfortunately, the res_stasis control loop did not check that
a bridge changing on a channel's control object was actually also non-NULL.
As a result, app_subscribe_bridge will be called with a NULL bridge when a
channel leaves a bridge. This causes a new subscription to be made to the
bridge. If an application has also subscribed to the bridge, the application
will now have two subscriptions:
(1) The explicit one created by the app
(2) The implicit one accidentally created by the control structure
As a result, the 'BridgeDestroyed' event can be sent multiple times. This
patch corrects the control loop such that it only subscribes an application
to a new bridge if the bridge pointer is non-NULL.
ASTERISK-24870
Change-Id: I3510e55f6bc36517c10597ead857b964463c9f4f
This patch adds support for receiving events regarding Peer status changes
and Contact status changes. This is particularly useful in scenarios where
we are subscribed to all endpoints and channels, where we often want to know
more about the state of channel technology specific items than a single
endpoint's state.
ASTERISK-24870
Change-Id: I6137459cdc25ce27efc134ad58abf065653da4e9
This patch adds support for subscribing to all device state changes. This is
done either by subscribing to an empty device, e.g., 'eventSource=deviceState:',
or by the WebSocket connection specifying that it wants all state in the
system.
ASTERISK-24870
Change-Id: I9cfeca1c9e2231bd7ea73e45919111d44d2eda32
This patch adds the ability to subscribe to all events. There are two possible
ways to accomplish this:
(1) On initial WebSocket connection. This patch adds a new query parameter,
'subscribeAll'. If present and True, Asterisk will subscribe the
applications to all ARI events.
(2) Via the applications resource. When subscribing in this manner, an ARI
client should merely specify a blank resource name, i.e., 'channels:'
instead of 'channels:12354'. This will subscribe the application to all
resources of the 'channels' type.
ASTERISK-24870 #close
Change-Id: I4a943b4db24442cf28bc64b24bfd541249790ad6
There is a slim chance of a race condition occurring where two threads
can both attempt to manipulate the same area.
Thread A can be handling an incoming initial SUBSCRIBE request. Thread A
lets the specific subscription handler know that the subscription has
been established.
At this point, Thread B may detect a state change on the subscribed
resource and queue up a notification task on Thread C, the subscription
serializer thread.
Now Thread A attempts to generate the initial NOTIFY request to send to
the subscriber at the same time that Thread C attempts to generate a
state change NOTIFY request to send to the subscriber.
The result is that Threads A and C can step on the same memory area,
resulting in a crash. The crash has been observed as happening when
attempting to allocate more space to hold the body for the NOTIFY.
The solution presented here is to queue the subscription establishment
and initial NOTIFY generation onto the subscription serializer thread
(Thread C in the above scenario). This way, there is no way that a state
change notification can occur before the initial NOTIFY is sent, and if
there is a quick succession of NOTIFYs, we can guarantee that the two
NOTIFY requests will be sent in succession.
Change-Id: I5a89a77b5f2717928c54d6efb9955e5f6f5cf815
We should not try to send a SIP response message because we may be
restoring a persistent subscription where we are not responding to a SIP
request.
Change-Id: Id89167ef90320c5563f37e632db0dda6cb9e7dec
ast_sip_pubsub_register_body_generator() did not account for the null
terminator set by sprintf() in the allocated output buffer.
Change-Id: I388688a132e479bca6ad1c19275eae0070969ae2
The default_from_user retrieval function was pulling the
default_from_user from the global configuration struct in an unsafe way.
If using a database as a backend configuration store, the global
configuration struct is short-lived, so grabbing a pointer from it
results in referencing freed memory.
The fix here is to copy the default_from_user value out of the global
configuration struct.
Thanks go to John Hardin for discovering this problem and proposing the
patch on which this fix is based.
ASTERISK-25390 #close
Reported by Mark Michelson
Change-Id: I6b96067a495c1259da768f4012d44e03e7c6148c
We will only rewrite the Contact header if there is no Record-Route header in
the received request. If a malfunctioning proxy places a Record-Route header
into a REGISTER request, we will decide that we shouldn't update the IP/port
in the Contact header, and we will end up storing a contact with an AoR that
contains the NAT'd IP address.
While it is nice to have the proxy *not* send a Record-Route in a REGISTER
request, it's also a good idea to not process the header in a non-dialog
message. This patch updates the code to explicitly ignore the Record-Route
header in REGISTER requests.
ASTERISK-25387 #close
Change-Id: I4bd3bcccc4003d460cc354d986b0dea2e433ef3f
Make certain that the pjsip session has not failed to
allocate the format capabilities structure, which can
otherwise cause a crash when referenced.
ASTERISK-25323
Change-Id: I602790ba12714741165e441cc64a3ecde4cb5750
In Asterisk 11, the announcer channel would receive channel variables
from the channel being parked by means of normal channel inheritance.
This functionality was lost during the big res_parking project in
Asterisk 12. This patch restores that functionality.
ASTERISK-25369 #close
Review: https://gerrit.asterisk.org/#/c/1180/
Change-Id: Ie47e618330114ad2ea91e2edcef1cb6f341eed6e
In working through a recent ICE negotiation bug, I found the debug
logging in res_rtp_asterisk to be lacking. This patch adds a number of
debug and warning statements that were helpful.
Change-Id: I950c6d8f13a41f14b3d6334b4cafe7d4e997be80
In the wild it is possible for Contact URIs to be quite long as
parameters can exist on them. This can present a problem when storing
them in the AstDB as the URI is used as part of the object name and
there is a fixed length limit for the AstDB. This will cause
the contact to not get stored.
This change uses the MD5 hash of the Contact URI as part of the
object name instead. This has a fixed length which is guaranteed
to not exceed the AstDB length limit.
ASTERISK-25295 #close
Change-Id: Ie8252a75331ca00b41b9f308f42cc1fbdf701a02
When an AoR is deleted by an external mechanism, such as through ARI, we
currently do not remove dynamic contacts that were created for that AoR as a
result of a received REGISTER request. As a result, re-creating the AoR will
cause the dynamic contact to be interpreted as a persistent contact, leading
to some rather strange state being created for the contacts/endpoints.
This patch adds a sorcery observer for the 'aor' object. When a delete is
issued on the underlying sorcery object, the observer is called, and all
contacts created and persisted in sorcery for that AoR are also removed. Note
that we don't want to perform this action when an AO2 object that is an AoR is
destroyed, as the AoR can still exist in the backing storage (and we would
thus be removing valid contacts from an AoR that still "exists".)
ASTERISK-25381 #close
Change-Id: I6697e51ef6b2858b5d63401f35dc378bb0f90328
We were passing the wrong count into pj_ice_sess_create_check_list(),
causing the create to fail if we ever received more than PJ_ICE_MAX_CAND
candidates.
Change-Id: I0303d8e1ecb20a8de9fe629a3209d216c4028378
When Asterisk sends an outbound SIP request, if there is no direct
reason to place a specific value for the username in the From header,
Asterisk would generate a UUID. For example, this would happen when
sending outbound OPTIONS requests when qualifying or when sending
outbound INVITE requests when originating (if no explicit caller ID were
provided). The issue is that some SIP providers reject these sorts of
requests with a "Name too long" error response.
This patch aims to fix this by changing the default outbound username in
From headers to "asterisk". This value can be overridden by changing the
default_from_user option in the global options if desired.
ASTERISK-25377 #close
Reported by Mark Michelson
Change-Id: I6a4d34a56ff73ff4f661b0075aeba5461b7f3190
Pjsip is refusing to use unsecure transport with "sips" in url.
WSS should be considered as secure transport.
ASTERISK-24602 #comment Partially fixed by setting WSS as secure
Change-Id: Iddac406c6deba6240c41a603b8859dfefe1a5353
When sending a stateful response, creation of the transaction can fail,
most commonly because we are trying to create a transaction from a
retransmitted request. When creation of the transaction fails, we end up
leaking a reference to a contact that was bumped when the response was
created.
This patch adds the missing deref and fixes the reference leak.
Change-Id: I2f97ad512aeb1b17e87ca29ae0abacb4d6395f07
A recent change to res_pjsip_pubsub switched to using pjsip_msg_print as
a means of writing an appropriate packet to persistent storage. While
this partially solved the issue, it had its own problems.
pjsip_msg_print will always add a Content-Length header to the message
it prints. Frequent restarts of Asterisk can result in persistent
subscriptions being written with five or more Content-Length headers. In
addition, sometimes some apparent corruption of individual headers could
be seen.
This aims to fix the problem by not running a parsed message through an
interpreter but rather by taking the raw message and saving it. The
logic for what to save is going to be different depending on whether a
SUBSCRIBE was received from the wire or if it was pulled from
persistence. When receiving a packet from the wire, when using a
streaming transport, the rdata->pkt_info.packet may contain multiple SIP
messages or fragments. However, the rdata->msg_info.msg_buf will always
contain the current SIP message to be processed. When pulling from
persistence, though, the rdata->msg_info.msg_buf will be NULL since no
transport actually handled the packet. However, since we know that we
will always ever pull one SIP message from persistence, we are free to
save directly from rdata->pkt_info.packet instead.
ASTERISK-25365 #close
Reported by Mark Michelson
Change-Id: I33153b10d0b4dc8e3801aaaee2f48173b867855b
The keepalive support in res_pjsip_sdp_rtp currently assumes
that a stream will only be negotiated once. This is false.
If the stream is replaced and later added back it can be
negotiated again causing multiple keepalive scheduled items
to exist. This change explicitly deletes the existing
keepalive scheduled item before adding the new one.
The res_pjsip_sdp_rtp module also does not stop RTP
keepalives or timeout timer if the stream has been
replaced. This change adds a callback to the session media
interface to allow a media stream to be stopped without
the resources being destroyed. This allows the scheduled
items and RTP to be stopped when the stream no longer
exists.
ASTERISK-25356 #close
Change-Id: Ibe6a7cc0927c87326fd5f1c0d4ad889dbfbea1de
When a BYE request is received the PJSIP invite session implementation
creates and sends a 200 OK response before we are aware of it. This
causes the INVITE session state callback to be called into and ultimately
the session supplements run on the BYE request. Once this response has
been sent the normal transaction state callback is invoked which
invokes the session supplements on the BYE request again. This can
be problematic in particular with res_pjsip_rfc3326 as it may
attempt to update the hangup cause code on the channel while it is
in the process of being hung up.
This change makes it so the session supplements are only invoked
once by the INVITE session state callback.
ASTERISK-25318 #close
Change-Id: I69c17df55ccbb61ef779ac38cc8c6b411376c19a
If the ast_strndup() call fails to allocate a copy of the
transport string for parsing, fail gracefully.
ASTERISK-25323
Reported by: Scott Griepentrog
Change-Id: Ia4b905ce6d03da53fea526224455c1044b1a5a28
Modules commonly used the pj_gethostip function for retrieving the
IP address of the host. This function does not cache the result and may
result in a DNS lookup occurring, or additional work. If the DNS
server is unreachable or network issues arise this can cause the
pj_gethostip function to block for a period of time.
This change adds an ast_sip_get_host_ip and ast_sip_get_host_ip_string
function which does the same thing but caches the host IP address at
module load time. This results in no additional work being done each
time the local host IP address is needed.
ASTERISK-25342 #close
Change-Id: I3205deb679b01fa5ac05a94b623bfd620a2abe1e
When recreating a subscription it is possible for a freed sub_tree
to be referenced when the initial NOTIFY fails to be created.
Change-Id: I681c215309aad01b21d611c2de47b3b0a6022788
When an endpoint is backed by a non-static conf file backend (such as
the AstDB or Realtime), the 'auth' object may be returned as being an
empty string. Currently, res_pjsip will interpret that as being a valid
auth object, and will attempt to authenticate inbound requests. This
isn't desired; is an auth value is empty (which the name of an auth
object cannot be), we should instead interpret that as being an invalid
auth object and skip it.
ASTERISK-25339 #close
Change-Id: Ic32b0c6eb5575107d5164a8c40099e687cd722c7
This is a type mismatch fix of the debugging commit
c63316eec1 made to find out why
a testsuite test was failing only on one of the continuous
integration build agents.
Change-Id: Iba34f6e87cec331f6ac80e4daff6476ea6f00a75
When sending an RTP keepalive, we need to be sure we're not dealing with
a NULL RTP instance. There had been a NULL check, but the commit that
added the rtp_timeout and rtp_hold_timeout options removed the NULL
check.
Change-Id: I2d7dcd5022697cfc6bf3d9e19245419078e79b64
Due to the use of ast_websocket_close in session termination it is
possible for the underlying socket to already be closed when the
session is terminated. This occurs when the close frame is attempted
to be written out but fails.
Change-Id: I7572583529a42a7dc911ea77a974d8307d5c0c8b
The res_http_websocket module will currently attempt to close
the WebSocket connection if fatal cases occur, such as when
attempting to write out data and being unable to. When the
fatal cases occur the code attempts to write a WebSocket close
frame out to have the remote side close the connection. If
writing this fails then the connection is not terminated.
This change forcefully terminates the connection if the
WebSocket is to be closed but is unable to send the close frame.
ASTERISK-25312 #close
Change-Id: I10973086671cc192a76424060d9ec8e688602845
If the saved SUBSCRIBE message is not parseable for whatever reason then
Asterisk could crash when libpjsip tries to parse the message and adds an
error message to the parse error list.
* Made ast_sip_create_rdata() initialize the parse error rdata list. The
list is checked after parsing to see that it remains empty for the
function to return successful.
ASTERISK-25306
Reported by Mark Michelson
Change-Id: Ie0677f69f707503b1a37df18723bd59418085256
This patch adds the .get callback to the format attribute module, such
that the Asterisk core or other third party modules can query for the
negotiated format attributes.
Change-Id: Ia24f55cf9b661d651ce89b4f4b023d921380f19c
We don't have a compatability function to fill in a missing htobe64; but
we already have one for the identical htonll.
Change-Id: Ic0a95db1c5b0041e14e6b127432fb533b97e4cac
An http request can be sent to get the existing Asterisk logs.
The command "curl -v -u user:pass -X GET 'http://localhost:8088
/ari/asterisk/logging'" can be run in the terminal to access the
newly implemented functionality.
* Retrieve all existing log channels
ASTERISK-25252
Change-Id: I7bb08b93e3b938c991f3f56cc5d188654768a808
An http request can be sent to create a log channel
in Asterisk.
The command "curl -v -u user:pass -X POST
'http://localhost:088/ari/asterisk/logging/mylog?
configuration=notice,warning'" can be run in the terminal
to access the newly implemented functionality for ARI.
* Ability to create log channels using ARI
ASTERISK-25252
Change-Id: I9a20e5c75716dfbb6b62fd3474faf55be20bd782
An http request can be sent to delete a log channel
in Asterisk.
The command "curl -v -u user:pass -X DELETE 'http://localhost:8088
/ari/asterisk/logging/mylog'" can be run in the terminal
to access the newly implemented functionally for ARI.
* Able to delete log channels using ARI
ASTERISK-25252
Change-Id: Id6eeb54ebcc511595f0418d586ff55914bc3aae6
The pjsip_rx_data structure has a pkt_info.packet field on it that is
the packet that was read from the transport. For datagram transports,
the packet read from the transport will correspond to the SIP message
that arrived. For streamed transports, however, it is possible to read
multiple SIP messages in one packet.
In a recent case, Asterisk crashed on a system where TCP was being used.
This is because at some point, a read from the TCP socket resulted in a
200 OK response as well as an incoming SUBSCRIBE request being stored in
rdata->pkt_info.packet. When the SUBSCRIBE was processed, the
combination 200 OK and SUBSCRIBE was saved in persistent storage. Later,
a restart of Asterisk resulted in the crash because the persistent
subscription recreation code ended up building the 200 OK response
instead of a SUBSCRIBE request, and we attempted to access
request-specific data.
The fix here is to use the pjsip_msg_print() function in order to
persist SUBSCRIBE requests. This way, rather than using the raw socket
data, we use the parsed SIP message that PJSIP has given us. If we
receive multiple SIP messages from a single read, we will be sure only
to save off the relevant SIP message. There also is a safeguard put in
place to make sure that if we do end up reconstructing a SIP response,
it will not cause a crash.
ASTERISK-25306 #close
Reported by Mark Michelson
Change-Id: I4bf16f7b76a2541d10b55de82bcd14c6e542afb2
The ast_sip_sanitize_xml function is used to sanitize
a string for placement into XML. This is done by examining
an input string and then appending values to an output
buffer. The function used by its implementation, strncat,
has specific behavior that was not taken into account.
If the size of the input string exceeded the available
output buffer size it was possible for the sanitization
function to write past the output buffer itself causing
a crash. The crash would either occur because it was
writing into memory it shouldn't be or because the resulting
string was not NULL terminated.
This change keeps count of how much remaining space is
available in the output buffer for text and only allows
strncat to use that amount.
Since this was exposed by the res_pjsip_pidf_digium_body_supplement
module attempting to send a large message the maximum allowed
message size has also been increased in it.
A unit test has also been added which confirms that the
ast_sip_sanitize_xml function is providing NULL terminated
output even when the input length exceeds the output
buffer size.
ASTERISK-25304 #close
Change-Id: I743dd9809d3e13d722df1b0509dfe34621398302
A change recently went in which enabled perfect forward secrecy for
DTLS in res_rtp_asterisk. This was accomplished two different ways
depending on the availability of a feature in OpenSSL. The fallback
method created a temporary instance of a key but did not free it.
This change fixes that.
ASTERISK-25265
Change-Id: Iadc031b67a91410bbefb17ffb4218d615d051396
Commit 39cc28f6ea attempted to fix a
test failure observed on 32 bit test agents by ensuring that a cast from
a 32 bit unsigned integer to a 64 bit unsigned integer was happening in
a predictable place. As it turns out, this did not cause test runs to
succeed.
This commit adds several redundant debug messages that print the payload
lengths of websocket frames. The idea here is that this commit will not
cause tests to succeed for the faulty test agent, but we might deduce
where the fault lies more easily this way by observing at what point the
expected value (537) changes to some ungangly huge number.
If you are wondering why something like this is being committed to the
branch, keep in mind that in commit
39cc28f6ea I noted that the observed test
failures only happen when automated tests are run. Attempts to run the
tests by hand manually on the test agent result in the tests passing.
Change-Id: I14a65c19d8af40dadcdbd52348de3b0016e1ae8d
We have seen a rash of test failures on a 32-bit build agent. Commit
48698a5e21 solved an obvious problem where
we were not encoding a 64-bit value correctly over the wire. This
commit, however, did not solve the test failures.
In the failing tests, ARI is attempting to send a 537 byte text frame
over a websocket. When sending a frame this small, 16 bits are all that
is required in order to encode the payload length on the websocket
frame. However, ast_websocket_write() thinks that the payload length is
greater than 65535 and therefore writes out a 64 bit payload length.
Inspecting this payload length, the lower 32 bits are exactly what we
would expect it to be, 537 in hex. The upper 32 bits, are junk values
that are not expected to be there.
In the failure, we are passing the result of strlen() to a function that
expects a uint64_t parameter to be passed in. strlen() returns a size_t,
which on this 32-bit machine is 32 bits wide. Normally, passing a 32-bit
unsigned value to somewhere where a 64-bit unsigned value is expected
would cause no problems. In fact, in manual runs of failing tests, this
works just fine. However, ast_websocket_write() uses the Asterisk
optional API, which means that rather than a simple function call, there
are a series of macros that are used for its declaration and
implementation. These macros may be causing some sort of error to occur
when converting from a 32 bit quantity to a 64 bit quantity.
This commit changes the logic by making existing ast_websocket_write()
calls use ast_websocket_write_string() instead. Within
ast_websocket_write_string(), the 64-bit converted strlen is saved in a
local variable, and that variable is passed to ast_websocket_write()
instead.
Note that this commit message is full of speculation rather than
certainty. This is because the observed test failures, while always
present in automated test runs, never occur when tests are manually
attempted on the same test agent. The idea behind this commit is to fix
a theoretical issue by performing changes that should, at the least,
cause no harm. If it turns out that this change does not fix the failing
tests, then this commit should be reverted.
Change-Id: I4458dd87d785ca322b89c152b223a540a3d23e67
This will add ECDH support to Asterisk. It will
detect auto ECDH support in OpenSSL
(1.0.2b and above) during ./configure. If this is
available, it will use it,
otherwise it will fall back to prime256v1 (this
behavior is consistent with
other projects such as Apache and nginx).
This fixes WebRTC being broken in Firefox 38+ due
to Firefox now only supporting
ciphers with perfect forward secrecy.
ASTERISK-25265 #close
Change-Id: I8c13b33a2a79c0bde2e69e4ba6afa5ab9351465b
An http request can be sent to rotate a specified log channel.
If the channel does not exist, an error response will be
returned.
The command "curl -v -u user:pass -X PUT 'http://localhost:8088
/ari/asterisk/logging/logChannelName/rotate'" can be run in the
terminal to access this new functionality.
* Added the ability to rotate log files through ARI
ASTERISK-25252
Change-Id: Iaefa21cbbc1b29effb33004ee3d89c977e76ab01
Two testsuite tests crashed in the same place as a result of an INVITE
being CANCELed.
tests/channels/pjsip/resolver/srv/failover/in_dialog/transport_unspecified
tests/channels/pjsip/resolver/srv/failover/in_dialog/transport_tcp
The session pointer is no longer in the inv->mod_data[session_module.id]
location because the INVITE transaction has reached the terminated state.
ASTERISK-25297 #close
Reported by: Richard Mudgett
Change-Id: Idb75fdca0321f5447d5dac737a632a5f03614427
A test agent was continuously failing all ARI tests when run against
Asterisk 13. As it turns out, the reason for this is that on those test
runs, for some reason we decided to use the super extended 64 bit
payload length for websocket text frames instead of the extended 16 bit
payload length. For 64-bit payloads, the expected byte order over the
network is
7, 6, 5, 4, 3, 2, 1, 0
However, we were sending the payload as
3, 2, 1, 0, 7, 6, 5, 4
This meant that we were saying to expect an absolutely MASSIVE payload
to arrive. Since we did not follow through on this expected payload
size, the client would sit patiently waiting for the rest of the payload
to arrive until the test would time out.
With this change, we use the htobe64() function instead of htonl() so
that a 64-bit byte-swap is performed instead of a 32 bit byte-swap.
Change-Id: Ibcd8552392845fbcdd017a8c8c1043b7fe35964a
This change adds support for the 'rtp_timeout' and 'rtp_timeout_hold'
endpoint options. These allow the channel to be hung up if RTP
is not received from the remote endpoint for a specified number of
seconds.
ASTERISK-25259 #close
Change-Id: I3f39daaa7da2596b5022737b77799d16204175b9
This adds an "rtp_keepalive" option for PJSIP endpoints. Similar to the
chan_sip option, this specifies an interval, in seconds, at which we
will send RTP comfort noise frames. This can be useful for keeping RTP
sessions alive as well as keeping NAT associations alive during lulls.
ASTERISK-25242 #close
Reported by Mark Michelson
Change-Id: I06660ba672c0a343814af4cec838e6025cafd54b
Misconfiguring sorcery.conf with a 'config' wizard with no extra data
will currently crash Asterisk on startup, as the wizard requires a comma
delineated list to parse. This patch updates res_sorcery_config to check
for the presence of the data before it starts manipulating it.
Change-Id: I4c97512e8258bc82abe190627a9206c28f5d3847
This patch adds support for push configuration of dynamic, i.e.,
sorcery, objects in Asterisk. It adds three new REST API calls to the
'asterisk' resource:
* GET /asterisk/{configClass}/{objectType}/{id}: retrieve the current
object given its ID. This returns back a list of ConfigTuples, which
define the fields and their present values that make up the object.
* PUT /asterisk/{configClass}/{objectType}/{id}: create or update an
object. A body may be passed with the request that contains fields to
populate in the object. The same format as what is retrieved using
the GET operation is used for the body, save that we specify that the
list of fields to update are contained in the "fields" attribute.
* DELETE /asterisk/{configClass}/{objectType}/{id}: remove a dynamic
object from its backing storage.
Note that the success/failure of these operations is somewhat
configuration dependent, i.e., you must be using a sorcery wizard that
supports the operation in question. If a sorcery wizard does not support
the create or delete mechanisms, then the REST API call will fail with a
403 forbidden.
ASTERISK-25238 #close
Change-Id: I28cd5c7bf6f67f8e9e437ff097f8fd171d30ff5c
setup_park_common_datastore() was assuming that a non-NULL string returned
for the ATTENDEDTRANSFER and BLINDTRANSFER channel variables are not empty
strings. Things got crashy as a result.
* Made setup_park_common_datastore() treat the channel variable values the
same whether they are NULL or empty for ATTENDEDTRANSFER and
BLINDTRANSFER.
ASTERISK-25254 #close
Reported by: Richard Mudgett
Change-Id: I9a9c174b33f354f35f82cc6b7cea8303adbaf9c2
Changed the unload mode to AST_FORCE_SOFT from AST_FORCE_FIRM,
which would unload a module even if it was in use.
* Changed unload mode to proper mode
ASTERISK-25173
Change-Id: If2402487b5bce05d9770f25f65f5c8e292ad5533
Having a debug message tell us that we attempted to look up an item but
failed is nice in circumstances when it isn't clear if the wizard was
queried correctly or not.
Change-Id: I2600c3bbea87f252196358f62e73f4c7da8632f7
This patch fixes some bad default value handling in the following
settings:
* The 'message_context' and 'accountcode' settings are not mandatory. As
such, we can allow their stringfield values to be empty.
* The 'media_encryption' setting applies a default value of 'none' to
the setting, which it then can't parse or understand. Since the value
is documented to be 'no', this will now apply that as the default
value.
Change-Id: Ib9be7f97a7a5b9bc7aee868edf5acf38774cff83
The crash fix for ASTERISK-25183 backported some code from master to try
to make sure that a BYE response is processed by the same serializer used
by the BYE request. The identified race condition causing that backport
was the BYE request code had not finished processing after sending the BYE
before the BYE response came in for processing under a different thread.
Unfortunately, there is still a race condition. Now the race condition is
between destroying the call session's serializer in
ast_taskprocessor_unreference() and using ast_taskprocessor_get() to get a
reference to the serializer for a BYE response. Even worse, the new race
condition is a design limitation of the taskprocessor implementation that
didn't matter in versions before v12. Back then, taskprocessors were only
destroyed when a module unloaded. Now res_pjsip can destroy them when a
call ends.
However, as noted on the ASTERISK-25183 commit,
session_inv_on_state_changed() is disassociating the dialog from the
session when the invite dialog state becomes PJSIP_INV_STATE_DISCONNECTED.
This is a tad too soon because our BYE request transaction has not
completed yet.
* Split session_end() that is called by session_inv_on_state_changed() to
hold off session destruction until the BYE transaction timeout occurs or a
failed initial INVITE transaction timeout occurs in
session_inv_on_tsx_state_changed().
ASTERISK-25201 #close
Reported by: Matt Jordan
Change-Id: Iaf8dc8485fd8392a2a3ee4ad3b7f7f04a0dcc961
An http request can be sent to reload an Asterisk module. If the
module can not be reloaded or is not already loaded, an error
response will be returned.
The command "curl -v -u user:pass -X PUT 'http://localhost:8088
/ari/asterisk/modules/{moduleName}'" (or something similar, based
on configuration) can be run in the terminal to access this new
functionality.
For more information, see:
https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource
* Added new ARI functionality
* Asterisk modules can be reloaded through http requests
ASTERISK-25173
Change-Id: I289188bcae182b2083bdbd9ebfffd50b62f58ae1
An http request can be sent to unload an Asterisk module. If the
module can not be unloaded or is already unloaded, an error response
will be returned.
The command "curl -v -u user:pass -X DELETE 'http://localhost:8088
/ari/asterisk/modules/{moduleName}'" (or something similar, depending
on configuration) can be run in the terminal to access this new
functionality.
For more information, see:
https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource
* Added new ARI functionality
* Asterisk modules can be unloaded through http requests
ASTERISK-25173
Change-Id: I535a95f5676deb02651522761ecbdc0b00b5ac57
An http request can be sent to load an Asterisk module. If the
module can not be loaded or is loaded already, an error response
will be returned.
The command curl -v -u user:pass -X POST 'http://localhost:8088/ari
/asterisk/modules/{moduleName}'" (or something similar, depending on
configuration) can be run in the terminal to access this new
functionality.
For more information, see:
https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource
* Added new ARI functionality
* Asterisk modules can be loaded through http requests
ASTERISK-25173
Change-Id: I9e05d5b8c5c666ecfef341504f9edc1aa84fda33
An http request can be sent to retrieve information on a single
module, including the resource name, description, use count, status,
and support level.
The command "curl -v -u user:pass -X GET 'http://localhost:8088/ari
/asterisk/modules/{moduleName}'" (or something similar, depending on
configuration) can be run in the terminal to access this new
functionality.
For more information, see:
https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource
* Added new ARI functionality
* Information on a single module can now be retrieved
ASTERISK-25173
Change-Id: Ibce5a94e70ecdf4e90329cf0ba66c33a62d37463
Again, tests now need to not end with a newline. This patch makes it so
the tests can register again, unit tests will actually pass, and we can
stop wasting time trying to figure out why builds are failing when they
really aren't failing.
Change-Id: Ide519fbeba89f413c733446c5ff7b224fc4ce840
An http request can be sent to retrieve a list of all existing modules,
including the resource name, description, use count, status, and
support level.
The command "curl -v -u user:pass -X GET 'http://localhost:8088/ari/
asterisk/modules" (or something similar, depending on configuration)
can be run in the terminal to access this new functionality.
For more information, see:
https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource
* Added new ARI functionality
* Information on modules can now be retrieved
Change-Id: I63cbbf0ec0c3544cc45ed2a588dceabe91c5e0b0
Gerrit is complaining of conflicts when trying to create a patch series
of all of the cherry-picked master commits, so I have instead squashed
it all into one commit.
ASTERISK-25067 #close
Reported by: Matt Jordan
Change-Id: I6dda90343fae24a75dc5beec84980024e8d61eb9
This change fixes a bug where the DTLS timeout timer would be
initialized to 0 if DTLS was not used for an RTP session.
ASTERISK-25103
Change-Id: If8d26bb054f1d300838850da5b8db9044c2fe2ac
This change moves logic for setting up the DTLS SSL contexts to
when the SDP is done being processed instead of when ICE negotiation
completes. It also stops handshakes from being initiated when we
are acting as a server.
Manipulating the SSL context when ICE negotiation has completed
is problematic as the SSL context is not protected and if acting
as a client the remote side may have started DTLS negotiation
already.
The retransmission timeout timer code has also been split up
and simplified some. Both RTP and RTCP now have their own timers
and the points at which the timer is stopped and started is now
more specific. When a packet is sent the timer is started. When
a response is received but before it is processed the timer is
stopped. This provides a guarantee that the timeout is not
occurring while the response is processed.
ASTERISK-22805 #close
ASTERISK-24550 #close
ASTERISK-24651 #close
ASTERISK-24832 #close
ASTERISK-25103 #close
ASTERISK-25127 #close
Change-Id: Ib75ea2546f29d6efc3d2d37c58df6986c7bd9b91
Calling t38_change_state() sets the t38 state so it makes little sense to
then check the state right after the call for something else.
* Made the code in t38_interpret_parameters() reject or exit T.38 mode as
intended but not implemented.
Change-Id: Ib281263a6ed44da9448132c4e6df1e183b8a3df2
MWI subscriptions can crash or corrupt memory when using the subscription
datastore to access the MWI subscription object because the datastore is
not holding a reference to the object.
* Give the subscription datastore a ref to the MWI subscription object.
It is unfortunate that the ref causes a circular ref chain that must be
explicitly broken to allow the memory to get released. The loop is broken
when the subscription is shutdown and if the subscription setup fails.
ASTERISK-25168 #close
Reported by: Carl Fortin
Change-Id: Ice4fa823f138ff10a6c74d280699c41a82836d4f
When res_pjsip body generator modules were generating XML or XPIDF
response bodies, there was a chance that the generated body would be the
exact size of the supplied buffer. Adding the nul string terminator would
then write beyond the end of the buffer and potentially corrupt memory.
* Fix MALLOC_DEBUG high fence violations caused by adding a nul string
terminator on the end of a buffer for XML or XPIDF response bodies.
* Made calls to pj_xml_print() safer if the XML prolog is requested. Due
to a bug in pjproject, the return value could be -1 _or_
AST_PJSIP_XML_PROLOG_LEN if the supplied buffer is not large enough.
* Updated the doxygen comment of AST_PJSIP_XML_PROLOG_LEN to describe the
return value of pj_xml_print() when the supplied buffer is not large
enough.
ASTERISK-25168
Reported by: Carl Fortin
Change-Id: Id70e1d373a6a2b2bd9e678b5cbc5e55b308981de
When a caller calls a FAX number and then hangs up right after the call is
answered then the T.38 re-INVITE automatic reject timer may still be
running after the channel goes away.
* Added session NULL channel checks on the code paths that get executed by
t38_automatic_reject() to prevent a crash when the T.38 re-INVITE
automatic reject timer expires.
ASTERISK-25168
Reported by: Carl Fortin
Change-Id: I07b6cd23815aedce5044f8f32543779e2f7a2403
All send/receive processing for a SIP transaction needs to be done under
the same threadpool serializer to prevent reentrancy problems inside
pjproject and res_pjsip.
* Add threadpool API call to get the current serializer associated with
the worker thread.
* Pick a serializer from a pool of default serializers if the caller of
res_pjsip.c:ast_sip_push_task() does not provide one.
This is a simple way to ensure that all outgoing SIP request messages are
processed under a serializer. Otherwise, any place where a pushed task is
done that would result in an outgoing out-of-dialog request would need to
be modified to supply a serializer. Serializers from the default
serializer pool are picked in a round robin sequence for simplicity.
A side effect is that the default serializer pool will limit the growth of
the thread pool from random tasks. This is not necessarily a bad thing.
* Made pjsip_distributor.c save the thread's serializer name on the
outgoing request tdata struct so the response can be processed under the
same serializer.
This is a cherry-pick from master.
**** ASTERISK-25115 Change-Id: Iea71c16ce1132017b5791635e198b8c27973f40a
NOTE: session_inv_on_state_changed() is disassociating the dialog from the
session when the invite dialog becomes PJSIP_INV_STATE_DISCONNECTED.
Unfortunately this is a tad too soon because our BYE request transaction
has not completed yet.
ASTERISK-25183 #close
Reported by: Matt Jordan
Change-Id: I8bad0ae1daf18d75b8c9e55874244b7962df2d0a
This change makes it so that when accepting a WebSocket
connection the HTTP response is sent as one packet instead of
fragmented. Browsers don't like it when you send it fragmented.
ASTERISK-25103
Change-Id: I9b82c4ec2949b0bce692ad0bf6f7cea9709e7f69
This patch updates a variety of Makefiles in Asterisk's build system to
remove .gcda and .gcno files when 'make clean' is executed. These files
are generated when '--enable-coverage' is passed to the Asterisk
configure script.
Change-Id: Ib70b41eea2ee2908885bff02e80faf9f40c84602
This fixes so a failure to get a timer file descriptor does not cascade
to closing FD 0.
On error, both res_timing_kqueue and res_timing_timerfd would call the
destructor before setting the file handle. The file handle had been
initialized to 0, causing FD 0 to be closed. This in turn, resulted in
floods of "CLI>" messages and an unusable terminal.
ASTERISK-19277 #close
Reported by: Barry Chern
For the 13 branch, this was already fixed. This patch only ensures that
we do not attempt to close a negative file descriptor.
Change-Id: I147d7e33726c6e5a2751928d56561494f5800350
This prevents a leak of a sorcery object type when realtime sorcery
objects are retrieved by fields or when multiple objects are retrieved.
The extent of this leak is that sorcery object types would be leaked.
These are allocated whenever an object type is registered with sorcery,
meaning that on module shutdown, these objects would be leaked. This
could be problematic if many reloads were performed, but it is not as
severe as if every sorcery object retrieved from realtime were being
leaked.
ASTERISK-25165 #close
Reported by Corey Farrell
Change-Id: I625c3b50eee4576670b7eeb013c81ad043b4b4f8
Returns a 'failure' from the module load routine indicates to Asterisk
that it should abort loading completely. This is rarely - in fact,
really, never - a good option. Aborting load of Asterisk from a dynamic
module implies that the core, and the rest of the dynamic modules, don't
matter: we should abandon all processing.
res_corosync is really not that important.
This patch updates the module such that, if it fails to load, it
politely declines (emitting ERROR messages along the way), and allows
Asterisk to continue to function.
Note that this issue was keeping Asterisk unit tests from running on
certain build agents.
Change-Id: I252249e81fb9b1a68e0da873f54f47e21d648f0f
A previous change made the contact only get rewritten if the dialog's
route set was not marked frozen. Unfortunately, while the intent of this
is correct, the dialog's route set actually gets marked as frozen
earlier than expected, especially for UAS dialogs.
Instead, the idea is that the contact needs to not be rewritten if there
is a pre-existing route set on the dialog. This is now accomplished by
checking the dialog's route set list instead of checking if the route
set is frozen.
Doing this causes some broken tests to begin passing again.
ASTERISK-25196
Reported by Mark Michelson
Change-Id: I525ab251fd40a52ede327a52a2810a56deb0529e
The client_state objects contain a serializer used to send the outbound
REGISTER messages. Once all those message transactions are complete then
the module can shutdown.
ASTERISK-24907 #close
Reported by: Kevin Harwell
Change-Id: Ibb2fe558f98190f2a06da830e0fadfa25516f547
res_pjsip_refer will attempt to add Referred-By or Replaces headers to
outbound INVITEs at times. If the INVITE gets challenged for
authentication, then we will resend the INVITE. Prior to this patch, the
Referred-By or Replaces header would be re-added to the outbound INVITE,
resulting in duplicated headers.
ASTERISK-25204 #close
Reported by Mark Michelson
Change-Id: I59fb5c08b4d253c0dba9ee3d3950b5025358222d
When performing some provider testing, the rewrite_contact option was
interfering with proper construction of a route set when sending an ACK
after receiving a 200 OK response to an INVITE.
The initial INVITE was sent to address sip:foo. The 200 OK had a Contact
header with URI sip:bar. In addition, the 200 OK had Record-Route
headers for sip:baz and sip:foo, in that order. Since the Record-Route
headers had the lr parameter, the result should have been:
* Set R-URI of the ACK to sip:bar.
* Add Route headers for sip:foo and sip:baz, in that order.
However, the rewrite_contact option resulted in our rewriting the
Contact header on the 200 OK to sip:foo. The result was:
* R-URI remained sip:foo.
* We added Route headers for sip:foo and sip:baz, in that order.
The result was that sip:bar was not indicated in the ACK at all, so the
far end never received our ACK. The call eventually dropped.
The intention of rewrite_contact is to rewrite the most immediate
destination of our SIP request to be the same address on which we
received a request or response. In the case of processing a SIP response
with Record-Route headers, this means that instead of rewriting the
Contact header, we should instead rewrite the bottom-most Record-Route
header. In the case of processing a SIP request with Record-Route
headers, this means we rewrite the top-most Record-route header.
Like when we rewrite the Contact header, we also ensure to update
the dialog's route set if it exists.
ASTERISK-25196 #close
Reported by Mark Michelson
Change-Id: I9702157c3603a2d0bd8a8215ac27564d366b666f
A module trying to unload needs to wait for all serializers it creates and
uses to complete processing before unloading.
ASTERISK-24907
Reported by: Kevin Harwell
Change-Id: I8c80b90f2f82754e8dbb02ddf3c9121e5e966059
* handle_client_state_destruction() must always be passed a ref to
client_state because it will always unref client_state.
handle_registration_response() was not passing a client_state ref.
* Made the final un-REGISTER message get sent normally using the pjproject
register control structure in handle_client_state_destruction(). The
previous code attempted to short circuit the response handling for the
module to unload. That doesn't work for a couple reasons. One,
pjsip_regc_send() may call the registered callback before it returns and
unbalance the client_state ref count. Two, the registered callback
handles any authentication for the un-REGISTER message.
* Made the distinction between internal registration state and external
registration status with sip_outbound_registration_status_str(). This is
necessary to avoid altering documented AMI messages with internal
changes.
* Removed references to client_state->client outside of the serializer
thread. When handle_client_state_destruction() destroys the pjproject
register control structure that memory is freed and cannot be referenced
anymore. These accesses were to provide information for debug and
off-nominal warning messages.
* In sip_outbound_registration_timer_cb() you should not access entry->id
after unrefing client_state because the passed in entry is normally
pointing to the timer entry in the client_state object.
ASTERISK-24907
Reported by: Kevin Harwell
Change-Id: Ia7b446d8644b6b4550ef5bea49527671de65183f
The sorcery pjsip 'registration' config object needs to be destroyed on
module unload. Otherwise, a reload of res_pjsip could try to use
callbacks for a previously unloaded instance of the module provided by
ast_sorcery_object_register() or one of the variants. Also, if
res_pjsip_outbound_registration were subsequently reloaded, the sorcery
config field objects would be registered in sorcery twice.
ASTERISK-24907
Reported by: Kevin Harwell
Change-Id: I304fad13dece2604af48353f6c6d9d5c7b064697
It is best if the loading code creates and initializes the module's
infrastructure before letting the system know of its existence. The
unloading code needs to reverse the actions of the loading code and in the
reverse order.
ASTERISK-24907
Reported by: Kevin Harwell
Change-Id: I5d151383e9787b5b60aa5e1627b10f040acdded4
The res_pjsip_mwi previously required a reload to set up the proper
subscriptions to allow unsolicited MWI to work. This change
makes it so the act of registering will also cause this to occur.
This is particularly useful if realtime is involved as no reload
needs to occur within Asterisk to cause the MWI information
to get sent.
ASTERISK-25180 #close
Change-Id: Id847b47de4b8b3ab8858455ccc2f07b0f915f252
This resolves two observed race conditions.
First, a bit of background on what the Stasis application does:
1a Creates a stasis_app_control structure. This structure is linked into
a global container and can be looked up using a channel's unique ID.
2a Puts the channel in an event loop. The event loop can exit either
because the stasis_app_control structure has been marked done, or
because of some other factor, such as a hangup. In the event loop, the
stasis_app_control determines if any specific ARI commands need to be
run on the channel and will run them from this thread.
3a Checks if the channel is bridged. If the channel is bridged, then
ast_bridge_depart() is called since channels that are added to Stasis
bridges are always imparted as departable.
4a Unlink the stasis_app_control from the container.
When an ARI command is received by Asterisk, the following occurs
1b A thread is spawned to handle the HTTP request
2b The stasis_app_control(s) that corresponds to the channel(s) in the
request is/are retrieved. If the stasis_app_control cannot be
retrieved, then it is assumed that the channel in question has exited
the Stasis app or perhaps was never in Stasis in the first place.
3b A command is queued onto the stasis_app_control, and the channel's
event loop thread is signaled to run the command.
4b While most ARI commands do nothing further, some, such as adding or
removing channels from a bridge, will block until the command they
issued has been completed by the channel's event loop.
The first race condition that is solved by this patch involves a crash
that can occur due to faulty detection of the channel's bridged status
in step 3a. What can happen is that in step 2a, the event loop may run
the ast_bridge_impart() function to asynchronously place the channel
into a bridge, then immediately exit the event loop because the channel
has hung up. In step 3a, we would detect that the channel was not
bridged and would not call ast_bridge_depart(). The reason that the
channel did not appear to be bridged was that the depart_thread that is
spawned by ast_bridge_impart() had not yet started. That is the thread
where the channel is marked as being bridged. Since we did not call
ast_bridge_depart(), the Stasis application would exit, and then the
channel would be destroyed Then the depart_thread would start up and
try to manipulate the destroyed channel, causing a crash.
The fix for this is to switch from using ast_channel_is_bridged() to
checking the NULLity of ast_channel_internal_bridge_channel() to
determine if ast_bridge_depart() needs to be called. The channel's
internal bridge_channel is set when ast_bridge_impart() is called and
is NULLed by the call to ast_bridge_depart(). If the channel's internal
bridge_channel is non-NULL, then the channel must have been imparted
into the bridge and needs to be departed, even if the actual bridging
operation has not yet started. By departing the channel when necessary,
the thread that is running the Stasis application will block until the
bridge gives the okay that the depart_thread has exited.
The second race condition that is solved by this patch involves a leak
of HTTP handler threads. The problem was that step 2b would successfully
retrieve a stasis_app_control structure. Then step 2a would exit the
channel from the event loop due to a hangup. Steps 3a and 4a would
execute, and then finally steps 3b and 4b would. The problem is that at
step 4b, when attempting to add a channel to a bridge, the thread would
block forever since the channel would never execute the queued command
since it was finished with the event loop. This meant that the HTTP
handling thread would be leaked, along with any references that thread
may have owned (in my case, I was seeing bridges leaked).
The fix for this is to hone in better on when the channel has exited the
event loop. The stasis_app_control structure has an is_done field that
is now set at each point where the channel may exit the event loop. If
step 2b retrieves a valid stasis_app_control structure but the control
is marked as done, then the attempted operation exits immediately since
there will be nothing to service the attempted command.
ASTERISK-25091 #close
Reported by Ilya Trikoz
Change-Id: If66265b73b4c9f8f58599124d777fedc54576628
This event was added some time ago in order to clarify when a channel
took the place of another channel in a parking lot. However, there was
no XML documentation added for the event. This patch adds the XML
documentation.
ASTERISK-24900 #close
Reported by Rusty Newton
Change-Id: I4cfe7777c4b94bbff91c9221c6096a7a02a92eac
Some phones send g.726 audio packed for AAL2, which differs from what is
recommended by RFC 3351. If Asterisk receives audio formatted as such when
negotiating g.726 then it sounds a bit distorted. Added an option to
res_pjsip_endpoint that allows g.726 negotiated audio to be treated as g.726
AAL2 packed.
ASTERISK-25158 #close
Reported by: Steve Pitts
Change-Id: Ie7e21f75493d7fe53e75e12c971e72f5afa33615
This patch fixes use-after-free bugs caught by AddressSanitizer.
1. PJSIP transport manager may decide to destroy transport on its own.
For example, when the contact registered via websocket has not renewed
its registration in time. The transport was destoyed, but the websocket
listener thread was still active until the socket closes, and then tried
to call transport_shutdown on transport that has been freed.
Also, the transport destructor accessed wstransport->rdata.tp_info.pool
right after freeing memory that contained wstransport itself.
This patch converts transport to an ao2 object, allowing it to be
refcounted, so that it is available until both websocket listener and
pjsip transport manager are finished with it.
2. The websocket listener deletes the last reference on websocket session
when the tcp connection is closed, and it gets destroyed, but
the transport manager may still use it, for example when disconnect
happens in the middle of a SIP transaction.
A new reference to websocket session has been added that is released
with the transport to prevent this.
ASTERISK-25096 #close
Reported by: Josh Kitchens
ASTERISK-24963 #close
Reported by: Badalian Vyacheslav
Change-Id: Idc0b63eb6e459c1ddfb2430127d34b3c4d8d373b
It is possible to receive incoming requests or responses after the channel
on an ast_sip_session has been destroyed and NULLed out. Handlers of these
sorts of requests or responses need to be prepared for the possibility
that the channel is NULL or else they could cause a crash.
While several places have been amended to deal with NULL channels, there
were still a couple of places that needed updating.
res_pjsip_dtmf_info.c: When handling incoming INFO requests, we need to
return early if there is no channel on the session.
res_pjsip_session.c: When handling a 302 response, we need to stop the
redirecting attempt if there is no channel on the session.
ASTERISK-25148 #close
reported by Mark Michelson
Change-Id: Id1a75ffc3d0eaa168b0b28188fb54d6cf9fc47a9
contact_apply_handler calls ast_res_pjsip_find_or_create_contact_status
to force the creation of a contact_status object whenever a new
contact is added but it didn't unref the returned object.
Added an ao2_cleanup(status) to plug the leak.
ASTERISK-25141
Change-Id: Icc1401cae142855a1abc86ab5179dfb3ee861c40
Reported-by: Corey Farrell
* Add some type casting so tv_usec can really be a long, instead of
some strange platform specific type.
* Add some .dylib style files to .gitignore.
* Switch from using -Xlinker to -Wl,. For [reasons unknown][], newer
versions of GCC, when compiling the Homebrew formula for Asterisk,
are not properly passing the -Xlinker options to the linker. Given
that -Wl, does exactly the [same thing][], and does it properly, this
patch changes the -Xlinker options to use -Wl, instead.
[reasons unknown]: http://bit.ly/1SUbEYx
[same thing]: https://gcc.gnu.org/onlinedocs/gcc/Link-Options.html
Change-Id: Id5e6b3c6cc86282ea5fca630dc3991137c5bf4dd
The loop to find the first available contact of an endpoint grabbed
contact from the iterator, then checked for offline state. This
caused the first contact after the state was found to leak a reference.
ASTERISK-25141
Change-Id: Id0f1d87410fc63742db0594eb4b18b36e99aec08
When permanent_uri_handler was creating the contact status
object for each contact, it wasn't unreffing it at the
end of the loop.
ASTERISK-25141 #close
Reported-by: Corey Farrell
Change-Id: I7bb127994677bb3d459f87952f8425c9b9967b12
When the remote peer requires authentication for in-dialog requests then
re-INVITEs to the peer cause the call to be disconnected and other
in-dialog requests to the peer like MESSAGE just don't go through.
* Made session_inv_on_tsx_state_changed() handle in-dialog authentication
for re-INVITEs and other methods. Initial INVITEs cannot be handled here
because the INVITE transaction must be restarted earlier.
* Pulled needed code from res/res_pjsip/pjsip_outbound_auth.c in
preparation for removing the file. The generic outbound authentication
code did not work as well as anticipated.
* Created outbound_invite_auth() to only handle initial outbound INVITEs.
Re-INVITEs cannot be handled here. The re-INVITE transaction is still in
progress and the PJSIP library cannot handle the overlapping INVITE
transactions. Other method types should not be handled here as this code
only works on outgoing calls and we need to handle incoming and outgoing
calls.
ASTERISK-25131 #close
Reported by: Richard Mudgett
Change-Id: I12bdd7ddccc819b4ce4b091e826d1e26334601b0
Add a new ContactStatus AMI event.
Publish the following status/state changes:
Created
Removed
Reachable
Unreachable
Unknown
Contact URI, new status/state, aor and endpoint names, and the
last qualify rtt result are included in the event.
ASTERISK-25114 #close
Change-Id: Id25aae5f7122facba183273efb3e8f36c20fb61e
Reported-by: George Joseph <george.joseph@fairview5.com>
Tested-by: George Joseph <george.joseph@fairview5.com>
Incoming SIP packets larger than PJSIP_MAX_PKT_LEN were themselves
truncated before passing to pjsip_tpmgr_receive_packet, but the length
was passed unaltered, thus causing memory corruption and segfault.
ASTERISK-25122 #close
Change-Id: I608a6b6b7f229eacc33a0a7d771d18e27e5b08ab
Many uses of stasis_unsubscribe in modules can be reached through unload.
These have been switched to stasis_unsubscribe_and_join.
Some subscription callbacks do nothing, for these I've created a noop
callback function in stasis.c. This is used by some modules that monitor
MWI topics in order to enable cache, since the callback does not become
invalid after dlclose it is safe to use stasis_unsubscribe on these, even
during module unload.
ASTERISK-25121 #close
Change-Id: Ifc2549fbd8eef7d703c222978e8f452e2972189c
In addition to specifying lists of 'presence' and 'message-summary',
users can also create lists of type 'dialog'. These should be treated in
the same fashion as 'presence'.
Change-Id: I583bb69cd9f88b0b29bf09ddaddeac4e84189f6e
When a SUBSCRIBE request is made to a dialplan hint that doesn't exist,
the current NOTICE message informing users of this swaps the context and
extension parameters. This can cause a bit of confusion.
Thanks to CptBurger in #asterisk for helping to point this out.
Change-Id: Ie584d1a58ae217385c87a450ca25b55ca0e36e43
Prior to this patch, when a WebSocket connection is made, ARI would not
be informed of the connection until after the WebSocket layer had
accepted the connection. This created a brief race condition where the
ARI client would be notified that it was connected, a channel would be
sent into the Stasis dialplan application, but ARI would not yet have
registered the Stasis application presented in the HTTP request that
established the WebSocket.
This patch resolves this issue by doing the following:
* When a WebSocket attempt is made, a callback is made into the ARI
application layer, which verifies and registers the apps presented in
the HTTP request. Because we do not yet have a WebSocket, we cannot
have an event session for the corresponding applications. Some
defensive checks were thus added to make the application objects
tolerant to a NULL event session.
* When a WebSocket connection is made, the registered application is
updated with the newly created event session that wraps the WebSocket
connection.
ASTERISK-24988 #close
Reported by: Joshua Colp
Change-Id: Ia5dc60dc2b6bee76cd5aff0f69dd53b36e83f636
This patch refactors the transaction timeout processing to eliminate
calling the lower level public pjsip functions and reverts to calling
pjsip_endpt_send_request again. This is the result of me noticing
a possible incompatibility with pjproject-2.4 which was causing
contact status flapping.
The original version of this feature used the lower level calls to
get access to the tsx structure in order to cancel the transaction
when our own timer expires. Since we no longer have that access,
if our own timer expires before the pjsip timer, we call the callbacks
and just let the pjsip transaction take it's own course. When the
transaction ends, it discovers the callbacks have already been run
and just cleans itself up.
A few messages in pjsip_configuration were also added/cleaned up.
ASTERISK-25105 #close
Change-Id: I0810f3999cf63f3a72607bbecac36af0a957f33e
Reported-by: George Joseph <george.joseph@fairview5.com>
Tested-by: George Joseph <george.joseph@fairview5.com>
When an inbound call is received the To header is checked
for the "line" option. Some remote servers will place this
in the request URI instead. This adds an additional check for
the option in the request URI.
ASTERISK-25072 #close
Reported by: Dmitriy Serov
Change-Id: Id4e44debbb80baad623b914a88574371575353c8
Use ast_manager_register_xml for res_mwi_external_ami manager
actions. This ensures the module is held open while any of
the actions are being run.
ASTERISK-25117 #close
Reported by: Corey Farrell
Change-Id: Iececfdc2da498b2c32b9e09042f5f12292007ac7
This patch updates http_websocket and its corresponding implementation
with a pre-session established callback. This callback allows for
WebSocket server consumers to be notified when a WebSocket connection is
attempted, but before we accept it. Consumers can choose to reject the
connection, if their application specific logic allows for it.
As a result, this patch pulls out the previously private
websocket_protocol struct and makes it public, as
ast_websocket_protocol. In order to preserve backwards compatibility
with existing modules, the existing APIs were left as-is, and new APIs
were added for the creation of the ast_websocket_protocol as well as for
adding a sub-protocol to a WebSocket server.
In particular, the following new API calls were added:
* ast_websocket_add_protocol2 - add a protocol to the core WebSocket
server
* ast_websocket_server_add_protocol2 - add a protocol to a specific
WebSocket server
* ast_websocket_sub_protocol_alloc - allocate a sub-protocol object.
Consumers can populate this with whatever callbacks they wish to
support, then add it to the core server or a specified server.
ASTERISK-24988
Reported by: Joshua Colp
Change-Id: Ibe0bbb30c17eec6b578071bdbd197c911b620ab2
The config wizard was always pulling the first occurrence of
a variable from an ast_variable list but this gets the template
value from the list instead of any overridden value. This patch
creates ast_variable_find_last_in_list() in config.c and updates
res_pjsip_config_wizard to use it instead of
ast_variable_find_in_list. Now the overridden values, where they
exist, are used instead of template variables.
Updated test_config to test the new API.
ASTERISK-25089 #close
Reported-by: George Joseph <george.joseph@fairview5.com>
Tested-by: George Joseph <george.joseph@fairview5.com>
Change-Id: Ifa7ddefc956a463923ee6839dd1ebe021c299de4
First byte of DTLS packet shall be in range 20-63, not 20-64. Refer to RFC
https://tools.ietf.org/html/rfc5764#section-5.1.2 for correct values.
Change-Id: Iae6fa0d72b37c36a27fe40686e0ae6fba3afec31
While trying to get WebRTC working with chan_pjsip, I was running
into the following error:
Attempted to set an invalid DTLS-SRTP configuration on RTP
instance...
Josh helpfully pointed out that res_srtp.so might not be loaded, and
sure enough, it wasn't. This patch adds a ERROR indiciating as much
to hopefully help others having a similar problem.
Change-Id: I13aa477b47b299876728a21b130998a0ea6cd19f
The res_pjsip_exten_state module currently has a race condition between
processing the extension state callback from the PBX core and processing
the subscription shutdown callback from res_pjsip_pubsub. There is currently
no synchronization between the two. This can present a problem as while
the SIP subscription will remain valid the tree it points to may not.
This is in particular a problem as a task to send a NOTIFY may get queued
which will try to use the tree that may no longer be valid.
This change does the following to fix this problem:
1. All access to the subscription tree is done within the task that
sends the NOTIFY to ensure that no other thread is modifying or
destroying the tree. This task executes on the serializer for the
subscriptions.
2. A reference to the subscription serializer is kept to ensure it
remains valid for the lifetime of the extension state subscription.
3. The NOTIFY task has been changed so it will no longer attempt
to send a NOTIFY if the subscription has already been terminated.
ASTERISK-25057 #close
Reported by: Matt Jordan
Change-Id: I0b3cd2fac5be8d9b3dc5e693aaa79846eeaf5643
Creating a snoop channel in ARI and spying only on a single direction (in or
out) results in CPU utilization continually increasing until the CPU is fully
consumed. This occurs because frames are being put in the opposing direction's
slin factory queue, but not being removed.
Fixed the problem by always reading and disposing of frames from the opposite
queue of the direction selected.
ASTERISK-24938 #closes
Change-Id: I935bfd15f1db958f364d9d6b3b45582c0113dd60
Missed this module in the previous commit. res_ari_bridges uses symbols
from res_stasis_playback and res_stasis_recording.
ASTERISK-25027 #close
Reported by: Corey Farrell
Change-Id: I90bf756abd25adfc4920d2869ebe7feb636b8c5f
Apply the negative connection cache setting to all connections,
even those that are not pooled. This ensures that the connection
will not be re-established before the negative connection cache
time is met.
ASTERISK-22708 #close
Change-Id: I431cc2e8584ab0b6908b3523d0a0e18c9a527271
Removed the extra space before "MODULEINFO" in res_pjsip_dlg_options.
This extra space prevented any of the dependencies from being seen by
menuselect, so building with default options would fail if PJSIP was
not installed.
This also makes the tool that extracts information for menuselect
tolerant of multiple spaces in the future.
ASTERISK-25033 #close
Reported by: Peter Whisker
Change-Id: Iccd54846f70c4a7a50cb5bf70b7bb5cb4bab3698
The Asterisk 13 version of the fix for outbound registration was missing
a key component that set the outbound authenticator's callback that
creates an authenticated request based on an old request. This was
picked up by some outbound registration tests failing in the testsuite.
Change-Id: I5ca9379698c606da36bc38eaffccedaf64211ce3
The res_ari_device_states module depends on res_stasis_device_state,
not res_stasis_device_states.
Change-Id: I26e02ad37f9e36bcc859867e2fad1b90452ec3de
When the PJSIP pjsip_regc_send function is invoked and an error
status returned the caller currently decrements the reference count
of the client state that it just incremented, assuming the
registration callback would not have been invoked. In practice
this is not correct. If the failure happens after the transaction
has been set up the callback will still be invoked. This will
cause the reference count to be incorrectly decremented twice, once
by the registration callback and second by the caller of
pjsip_regc_send.
This change makes it so that whether the callback is invoked or
not is known by the caller of pjsip_regc_send. Depending on
this it can know whether it is responsible for decrementing the
reference count of the client state or not.
ASTERISK-25037 #close
Reported by: Joshua Colp
Change-Id: I749dc12f3a22115c49c5d7d95ff42a5fa45319de
A previous set of patches (see: ASTERISK-22790 & ASTERISK-23231) made it so
a v.27 modem was not allowed to have a minimum transmission rate of 2400 bits
per second. This reverts all or some of those patches since according to the
v.27ter standard a rate of 2400 bits per second is also supported.
One of the original patches also added 9600 bits per second support for v.27.
This patch also removes that since v.27ter only supports 2400/4800 bits per
second.
Also, since Asterisk specifically supports v.27ter the enum was renamed to
better reflect this.
ASTERISK-24955 #close
Reported by: Matt Jordan
Change-Id: I4b9dfb6bf7eff08463ab47ee1a74224f27cae733
Sections Exist in pjsip.conf
This patch modifies the current loading strategy of the pjsip configuration. If
duplicate sections (e.g. sections containing the same [id/type]) are defined in
[pjsip.conf], the loader will consider the configuration for the given type as
invalid when the duplicate section is encountered. The entire configuration
(including what was previously loaded) for the duplicate [id/type] sections
will be rejected and destroyed, an error message is logged and the load
processing for the given stops.
ASTERISK-24996
Reported By: Ashley Sanders
Change-Id: I35090ca4cd40f1f34881dfe701a329145c347aef
Virtual line support establishes a relationship between messages
related to an outbound registration and a local endpoint. This is
accomplished by attaching a parameter to the Contact of the outbound
registration and looking for it on any received requests. If the
parameter exists and can be matched to an outbound registration
the configured endpoint is associated with the request.
ASTERISK-24949 #close
Reported by: Joshua Colp
Change-Id: I7df909d2625479110a83fdd354c21ac539e8615d
ARI modules that are generated by 'make ari-stubs' are all dependent on
res_ari_model. Additionally some of the same modules depend on one or more
res_stasis_* modules.
ASTERISK-25027 #close
Reported by: Corey Farrell
Change-Id: I8e07fe7e81fedacb87232f2b6f8b5f47927b4153
This is the Asterisk 13 version of a change to master that allows for
registration responses to be processed successfully potentially after
the original transaction has timed out. The main difference between this
and the master change is that the master version has API changes that
are unacceptable for 13. For 13, this is worked around by adding a new
API call that the outbound registration code uses instead.
The following is the text from the master version of this commit:
Odd behaviors have been observed during outbound registrations. The most
common problem witnessed has been one where a request with
authentication credentials cannot be created after receiving a 401
response. Other behaviors include apparently processing an incorrect SIP
response.
Inspecting the code led to an apparent issue with regards to how we
handle transactions in outbound registration code. When a response to a
REGISTER arrives, we save a pointer to the transaction and then push a
task onto the registration serializer. Between the time that we save the
pointer and push the task, it's possible for the transaction to be
destroyed due to a timeout. It's also possible for the address to be
reused by the transaction layer for a new transaction.
To allow for authentication of a REGISTER request to be authenticated
after the transaction has timed out, we now also hold a reference to the
original REGISTER request instead of the transaction. The function for
creating a request with authentication has been altered to take the
original request instead of the transaction where the original request
was sent.
ASTERISK-25020
Reported by Mark Michelson
Change-Id: If1ee5f601be839479a219424f0358a229f358f7c
When problems occur regarding outbound registrations, it currently
is difficult to debug. Most off-nominal paths had warning messages,
but sometimes we want to know what's going on before hitting the
off-nominal path. This patch adds lots of debugging output that
should give a clearer picture of what is happening with regards
to outbound registrations.
ASTERISK-25020
Reported by Mark Michelson
Change-Id: I577bde7860be0a6c872b5bcb4d5047340bf45d45
ao2 ref leak in res_rtp_asterisk.c when a DTLS policy is created.
The resources are linked into a table, but the original alloc refs
are never released. ast_strdup leak in rtp_engine.c. If
ast_rtp_dtls_cfg_copy() is called twice on the same destination struct,
a pointer to an alloc'd string is overwritten before the string is free'd.
ASTERISK-25022
Reported by: one47
Change-Id: I62a8ceb8679709f6c3769136dc6aa9a68202ff9b
Permanent contacts that hadn't been qualified yet were missing
their contact_status entries causing SEGVs when running CLI
commands.
This patch makes sure that contact_statuses are created for
both dynamic and permanent contacts when they are created.
It also adds checks in the CLI code to make sure there's a
contact_status, just in case.
ASTERISK-25018 #close
Reported-by: Ivan Poddubny
Tested-by: Ivan Poddubny
Tested-by: George Joseph
Change-Id: I3cc13e5cedcafb24c400368b515b02d7fb81e029
The way PJSIP generates an authenticated request is to use a previous
request as a template. This means that the authenticated request will
have the same Call-ID, From header (including tag), and CSeq as the
original request. PJSIP generates a new branch on the Via header to
indicate that this is a new transaction, though.
There are some SIP implementations, though, that do not notice the
change in the branch and therefore will match the authed request to the
original request's transaction. Since the CSeq is the same, the server
will repeat the response it sent to the original request.
This patch aids interoperability by increasing the CSeq of the authed
request by one.
ASTERISK-24845 #close
Reported by: Carl Fortin
Tested by: Carl Fortin
Change-Id: I39c4ca52e688a9f83bcc1878371334becdc5be01
When Asterisk originates a channel to an application, the channel is
hung up once the application finishes executing. When the application
in question is SendFax, the Asterisk PJSIP code will attempt to reinvite
the T.38 session to audio after the FAX completes. The hangup of the
channel happens in the midst of this reinvite transaction. In most
circumstances, this works out okay because the BYE is delayed until the
reinvite transaction can complete.
However, if the reinvite that Asterisk sends receives a 401/407
response, then Asterisk's attempt to re-send the reinvite with
authentication will fail. This is because the session supplement in
res_pjsip_t38 makes the assumption that the channel on the session will
always be non-NULL. Since the channel has been hung up, though, the
channel is now NULL. Attempting to operate on the channel causes a
crash.
This patch fixes the issue by ensuring that the channel on the session
is not NULL before attempting to mess with the T.38 framehook.
This patch also contains some corrections for comments that were
incorrect and really confused me when I first started looking at the
code.
ASTERISK-25004 #close
Reported by Mark Michelson
Change-Id: Ic5a1230668369dda4bb13524098aed9306ab45a0
Currently we use pjsip_parse_hdr to validate contact uris but it
appears that it allows uris without a scheme if there's a port
supplied. I.E myexample.com will fail but myexample.com:5060 will
pass even though it has no scheme. This causes SEGVs later on
whenever the uri is used.
To prevent this, permanent_contact_validate has been updated to check
that the scheme is either 'sip' or 'sips'.
2 uses of possibly-null endpoint have also been fixed in
create_out_of_dialog_request.
ASTERISK-24999
Change-Id: Ifc17d16a4923e1045d37fe51e43bbe29fa556ca2
Reported-by: Brad Latus
clang can warn about a so called tautological-compare, when it finds
comparisons which are logically always true, and are therefor deemed
unnecessary.
Exanple:
unsigned int x = 4;
if (x > 0) // x is always going to be bigger than 0
Enum Case:
Each enumeration is its own type. Enums are an integer type but they
do not have to be *signed*. C leaves it up to the compiler as an
implementation option what to consider the integer type of a particu-
lar enumeration is. Gcc treats an enum without negative values as
an int while clang treats this enum as an unsigned int.
rmudgett & mmichelson: cast the enum to (unsigned int) in assert.
The cast does have an effect. For gcc, which seems to treat all enums
as int, the cast to unsigned int will eliminate the possibility of
negative values being allowed. For clang, which seems to treat enums
without any negative members as unsigned int, the cast will have no
effect. If for some reason in the future a negative value is ever
added to the enum the assert will still catch the negative value.
ASTERISK-24917
Change-Id: I0557ae0154a0b7de68883848a609309cdf0aee6a
On some systems, res_corosync isn't compatible with the installed version of
corosync so corosync_cfg_initialize fails, load_module returns LOAD_FAILURE,
and Asterisk terminates. The work around has been to remember to add
res_corosync as a noload in modules.conf. A better solution though is to have
res_corosync check for its config file before attempting to call corosync apis
and return LOAD_DECLINE if there's no config file. This lets Asterisk loading
continue.
If you have a res_corosync.conf file and res_corosync fails, you get the same
behavior as today and the fatal error tells you something is wrong with the
install.
ASTERISK-24998
Change-Id: Iaf94a9431a4922ec4ec994003f02135acfdd3889
clang can warn about a so called tautological-compare, when it finds
comparisons which are logically always true, and are therefor deemed
unnecessary.
Exanple:
unsigned int x = 4;
if (x > 0) // x is always going to be bigger than 0
Enum Case:
Each enumeration is its own type. Enums are an integer type but they
do not have to be *signed*. C leaves it up to the compiler as an
implementation option what to consider the integer type of a particu-
lar enumeration is. Gcc treats an enum without negative values as
an int while clang treats this enum as an unsigned int.
rmudgett & mmichelson: cast the enum to (unsigned int) in assert.
The cast does have an effect. For gcc, which seems to treat all enums
as int, the cast to unsigned int will eliminate the possibility of
negative values being allowed. For clang, which seems to treat enums
without any negative members as unsigned int, the cast will have no
effect. If for some reason in the future a negative value is ever
added to the enum the assert will still catch the negative value.
ASTERISK-24917
Change-Id: Ief23ef68916192b9b72dabe702b543ecfeca0b62
Currently the res_pjsip_mwi module only sends an unsolicited MWI NOTIFY upon
a mailbox state change (such as a new message being left, or one being deleted).
In practice this is not sufficient to keep clients aware of the current MWI status.
This change makes the module send unsolicited MWI NOTIFY on startup so that
clients are guaranteed to have the most up to date MWI information. It also makes
clients receive an unsolicited MWI NOTIFY upon registration so if they are unaware
of the current MWI status they receive it.
ASTERISK-24982 #close
Reported by: Joshua Colp
Change-Id: I043f20230227e91218f18a82c7d5bb2aa62b1d58
When SUBSCRIBE dialogs were established, we never associated
the endpoint that created the subscription with the dialog
we end up creating. In most cases, this ended up not causing
any problems.
The actual bug that was observed was that when a device that
was behind NAT established a subscription with Asterisk, Asterisk
would end up sending in-dialog NOTIFY requests to the device's
private IP addres instead of the public address of the NAT router.
When Asterisk receives the initial SUBSCRIBE from the device,
res_pjsip_nat rewrites the contact to the public address on which the
SUBSCRIBE was received. This allows for the dialog to have its target
address set to the proper public address. Asterisk then would send a 200
OK response to the SUBSCRIBE, then a NOTIFY with the initial
subscription state. The device would then send a 200 OK response to
Asterisk's NOTIFY.
Here's where things went wrong. When the 200 OK arrived, res_pjsip_nat
did not rewrite the address in the Contact header. Then, when the PJSIP
dialog layer processed the 200 OK, PJSIP would perform a comparison
between the IP address in the Contact header and its saved target
address for the dialog. Since they differed, PJSIP would update the
target dialog address to be the address in the Contact header. From this
point, if Asterisk needed to send a NOTIFY to the device, the result was
that the NOTIFY would be sent to the private address that the device
placed in the Contact header.
The reason why res_pjsip_nat did not rewrite the address when it
received the 200 OK response was that it could not associate the
incoming response with a configured endpoint. This is because on a
response, the only way to associate the response to an endpoint is by
finding the dialog that the response is associated with and then finding
the endpoint that is associated with that dialog. We do not perform
endpoint lookups on responses. res_pjsip_pubsub skipped the step of
associating the endpoint with the dialog we created, so res_pjsip_nat
could not find the associated endpoint and therefore couldn't rewrite
the contact.
This commit message is like 50x longer than the actual fix.
ASTERISK 24981 #close
Reported by Mark Michelson
Change-Id: I2b963c58c063bae293e038406f7d044a8a5377cd
Contact status rtt is an int64_t and needs the PRId64 macro to
properly create the format specifier on 32-bit systems.
Change-Id: I4b8ab958fc1e9a179556a9b4ffa49673ba9fdec7
The "Add qualify_timeout processing and eventing" patch introduced
an issue where contacts that had qualify_frequency set to 0 were
showing Unavailable instead Unknown. This patch checks for
qualify_frequency=0 and create an "Unknown" contact_status
with an RTT = 0.
Previously, the lack of contact_status implied Unknown but since
we're now changing endpoint state based on contact_status, I've
had to add new UNKNOWN status so that changes could trigger the
appropriate contact_status observers.
ASTERISK-24977: #close
Change-Id: Ifcbc01533ce57f0e4e584b89a395326e098b8fe7
Three fax related tests started failing as a result of changes made for
ASTERISK-24841:
tests/fax/pjsip/gateway_t38_g711
tests/fax/sip/gateway_mix1
tests/fax/sip/gateway_mix3
Historically, ast_channel_make_compatible() did nothing if the channels
were already "compatible" even if they had a sub-optimal translation path
already setup. With the changes from ASTERISK-24841 this is no longer
true in order to allow the best translation paths to always be picked. In
res_fax.c:fax_gateway_framehook() code manually setup the channels to go
through slin and then called ast_channel_make_compatible(). With the
previous version of ast_channel_make_compatible() this was always a
no-operation.
* Remove call to ast_channel_make_compatible() in fax_gateway_framehook()
that now undoes what was just setup when the framehook is attached.
* Fixed locking around saving the channel formats in
fax_gateway_framehook() to ensure that the formats that are saved are
consistent.
* Fix copy pasta errors in fax_gateway_framehook() that confuses read and
write when dealing with saved channel formats.
ASTERISK-24841
Reported by: Matt Jordan
Change-Id: I6fda0877104a370af586a5e8cf9e161a484da78d
A potential problem that can arise is the following:
* Bob's phone is programmed to automatically forward to Carol.
* Carol's phone is programmed to automatically forward to Bob.
* Alice calls Bob.
If left unchecked, this results in an endless loops of call forwards
that would eventually result in some sort of fiery crash.
Asterisk's method of solving this issue was to track which interfaces
had been dialed. If a destination were dialed a second time, then
the attempt to call that destination would fail since a loop was
detected.
The problem with this method is that call forwarding has evolved. Some
SIP phones allow for a user to manually forward an incoming call to an
ad-hoc destination. This can mean that:
* There are legitimate use cases where a device may be dialed multiple
times, or
* There can be human error when forwarding calls.
This change removes the old method of detecting forwarding loops in
favor of keeping a count of the number of destinations a channel has
dialed on a particular branch of a call. If the number exceeds the
set number of max forwards, then the call fails. This approach has
the following advantages over the old:
* It is much simpler.
* It can detect loops involving local channels.
* It is user configurable.
The only disadvantage it has is that in the case where there is a
legitimate forwarding loop present, it takes longer to detect it.
However, the forwarding loop is still properly detected and the
call is cleaned up as it should be.
Address review feedback on gerrit.
* Correct "mfgium" to "Digium"
* Decrement max forwards by one in the case where allocation of the
max forwards datastore is required.
* Remove irrelevant code change from pjsip_global_headers.c
ASTERISK-24958 #close
Change-Id: Ia7e4b7cd3bccfbd34d9a859838356931bba56c23
This is the second follow-on to https://reviewboard.asterisk.org/r/4572/ and the
discussion at
http://lists.digium.com/pipermail/asterisk-dev/2015-March/073921.html
The basic issues are that changes in contact status don't cause events to be
emitted for the associated endpoint. Only dynamic contact add/delete actions
update the endpoint. Also, the qualify timeout is fixed by pjsip at 32 seconds
which is a long time.
This patch makes use of the new transaction timeout feature in r4585 and
provides the following capabilities...
1. A new aor/contact variable 'qualify_timeout' has been added that allows the
user to specify the maximum time in milliseconds to wait for a response to an
OPTIONS message. The default is 3000ms. When the timer expires, the contact is
marked unavailable.
2. Contact status changes are now propagated up to the endpoint as follows...
When any contact is 'Available', the endpoint is marked as 'Reachable'. When
all contacts are 'Unavailable', the endpoint is marked as 'Unreachable'. The
existing endpoint events are generated appropriately.
ASTERISK-24863 #close
Change-Id: Id0ce0528e58014da1324856ea537e7765466044a
Tested-by: Dmitriy Serov
Tested-by: George Joseph <george.joseph@fairview5.com>
This change makes the send_notify of the sub_tree
not happen when the sub_tree has been deleted due
to the notify call failing, which avoids a crash.
ASTERISK-24970 #close
Change-Id: I1f20ffc08b192f59c457293b218025a693992cbf
This is the first follow-on to https://reviewboard.asterisk.org/r/4572/ and the
discussion at
http://lists.digium.com/pipermail/asterisk-dev/2015-March/073921.html
Since we currently have no control over pjproject transaction timeout, this
patch pulls the pjsip_endpt_send_request function out of pjproject and into
res_pjsip/endpt_send_transaction in order to implement that capability.
Now when the transaction is initiated, we also schedule our own pj_timer with
our own desired timeout.
If the transaction completes before either timeout, pjproject cancels its timer,
and calls our tsx callback where we cancel our timer and run the app callback.
If the pjproject timer times out first, pjproject calls our tsx callback where
we cancel our timer and run the app callback.
If our timer times out first, we terminate the transaction which causes
pjproject to cancel its timer and call our tsx callback where we run the app
callback.
Regardless of the scenario, pjproject is calling the tsx callback inside the
group_lock and there are checks in the callback to make sure it doesn't run
twice.
As part of this patch ast_sip_send_out_of_dialog_request was created to replace
its similarly named private function. It takes a new timeout argument in
milliseconds (<= 0 to disable the timeout).
ASTERISK-24863 #close
Reported-by: George Joseph <george.joseph@fairview5.com>
Tested-by: George Joseph <george.joseph@fairview5.com>
Change-Id: I0778dc730d9689c5147a444a04aee3c1026bf747
Currently when Asterisk starts initial qualifies of contacts are spread out
randomly between 0 and qualify_timeout to prevent network and system overload.
If a contact's qualify_frequency is 5 minutes however, that contact may be
unavailable to accept calls for the entire 5 minutes after startup. So while
staggering the initial qualifies is a good idea, basing the time on
qualify_timeout could leave contacts unavailable for too long.
This patch adds a new global parameter "max_initial_qualify_time" that sets the
maximum time for the initial qualifies. This way you could make sure that all
your contacts are initialy, randomly qualified within say 30 seconds but still
have the contact's ongoing qualifies at a 5 minute interval.
If max_initial_qualify_time is > 0, the formula is initial_interval =
min(max_initial_interval, qualify_timeout * random(). If not set,
qualify_timeout is used.
The default is "0" (disabled).
ASTERISK-24863 #close
Change-Id: Ib80498aa1ea9923277bef51d6a9015c9c79740f4
Tested-by: George Joseph <george.joseph@fairview5.com>
OPTIONAL_API has conditionals to define AST_OPTIONAL_API and
AST_OPTIONAL_API_ATTR differently based on if AST_API_MODULE is defined.
Unfortunately this is inside the include protection block, so only the
first status of AST_API_MODULE is respected. For example res_monitor
is an optional API provider, but uses func_periodic_hook. This makes
func_periodic_hook non-optional to res_monitor.
ASTERISK-17608 #close
Reported by: Warren Selby
Change-Id: I8fcf2a5e7b481893e17484ecde4f172c9ffb5679
Add the .gitignore and .gitreview files to the asterisk repo.
NB: You can add local ignores to the .git/info/exclude file
without having to do a commit.
Common ignore patterns are in the top-level .gitignore file.
Subdirectory-specific ignore patterns are in their own .gitignore
files.
Change-Id: I4c8af3b8e3739957db545f7368ac53f38e99f696
Tested-by: George Joseph
Prior to this patch, the far_max_datagram value on the UDPTL structure would
remain -1 if the remote endpoint fails to provide the SDP media attribute
T38FaxMaxDatagram. This can result in the INVITE request being rejected. With
this patch, we will now properly initialize the value with either the default
value or with the value provided by pjsip.conf's t38_udptl_maxdatagram
parameter.
Review: https://reviewboard.asterisk.org/r/4589
ASTERISK-24928 #close
Reported by: Juergen Spies
Tested by: Juergen Spies
patches:
pjsipT38patch20150331.txt submitted by Juergen Spies (License 6698)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434688 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With this patch, chan_pjsip/res_pjsip now sets the native formats to the
codecs negotiated by a call.
* The changes in chan_pjsip.c and res_pjsip_sdp_rtp.c set the native
formats to include all the negotiated audio codecs instead of only the
initial preferred audio codec and later the currently received audio
codec.
* The audio frame handling in channel.c:ast_read() is more streamlined and
will automatically adjust to changes in received frame formats. The new
policy is to remove translation and pass the new frame format to the
receiver except if the translation was to a signed linear format. A more
long winded version is commented in ast_read() along with some caveats.
* The audio frame handling in channel.c:ast_write() is more streamlined
and will automatically adjust any needed translation to changes in the
frame formats sent. Frame formats sent can change for many reasons such
as a recording is being played back or the bridged peer changed the format
it sends. Since it is a normal expectation that sent formats can change,
the codec mismatch warning message is demoted to a debug message.
* Removed the short circuit check in
channel.c:ast_channel_make_compatible_helper(). Two party bridges need to
make channels compatible with each other. However, transfers and moving
channels among bridges can result in otherwise compatible channels having
sub-optimal translation paths if the make compatible check is short
circuited. A result of forcing the reevaluation of channel compatibility
is that the asterisk.conf:transcode_via_slin and codecs.conf:genericplc
options take effect consistently now. It is unfortunate that these two
options are enabled by default and negate some of the benefits to the
changes in channel.c:ast_read() by forcing translation through signed
linear on a two party bridge.
* Improved the softmix bridge technology to better control the translation
of frames to the bridge. All of the incoming translation is now normally
handled by ast_read() instead of splitting any translation steps between
ast_read() and the slin factory. If any frame comes in with an unexpected
format then the translation path in ast_read() is updated for the next
frame and the slin factory handles the current frame translation.
This is the final patch in a series of patches aimed at improving
translation path choices. The other patches are on the following reviews:
https://reviewboard.asterisk.org/r/4600/https://reviewboard.asterisk.org/r/4605/
ASTERISK-24841 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/4609/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434671 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds support for automatically detecting the type of DTMF that a
PJSIP endpoint supports. When the 'dtmf_mode' endpoint option is set to 'auto',
the channel created for an endpoint will attempt to determine if RFC 4733
DTMF is supported. If so, it will use that DTMF type. If not, the DTMF type
for the channel will be set to inband.
Review: https://reviewboard.asterisk.org/r/4438
ASTERISK-24706 #close
Reported by: yaron nahum
patches:
yaron_patch_3_Feb.diff submitted by yaron nahum (License 6676)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434637 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While investigating other unload issues I realized that the load/unload process
for the config wizard was pretty ugly so I've refactored it as follows...
When the res_pjsip sorcery instance is created the config_wizard bumps it's own
module reference to prevent it from unloading while the sorcery instance is
still active. When res_pjsip unloads and it's sorcery instance is destroyed,
the config wizard unrefs itself which then allows itself to unload cleanly.
Since the config wizard now can't load after res_pjsip or unload before it
(which should have been the correct behavior all along), I was able to remove
the chunks of code in both load_module and unload_module that handled that case.
Ran the testsuite tests to insure there were no functional changes and REF_DEBUG
to insure that Asterisk was shutting down cleanly with no FRACKs or leaks.
Tested-by: George Joseph
Review: https://reviewboard.asterisk.org/r/4610/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434619 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the ChannelHold event was added, the 'musicclass' parameter was
erroneously removed. This caused the ChannelHold events to be rejected as
they failed model validation. This patch updates the Swagger schema such that
it now properly reflects the event that is being created.
Hooray for tests that catch things like this.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434597 65c4cc65-6c06-0410-ace0-fbb531ad65f3
res_pjsip_phoneprov_provider was leaking references to phoneprov objects due to
a missing OBJ_NODATA in an ao2_callback in load_users(). Rather than adding the
OBJ_NODATA, I changed load_users to use a more straightforward ao2_iterator.
This plugged the leak but exposed an unload order issue between
res_pjsip_phoneprov_provider, res_phoneprov and res_pjsip.
res_pjsip_phoneprov_provider unloads first, then res_phoneprov, then res_pjsip.
Since res_pjsip_phoneprov_provider uses res_pjsip's sorcery instance, when it
unloads, it's objects are still in the sorcery instance. When res_pjsip
unloads, it destroys all its objects including res_pjsip_phoneprov_provider's.
The phoneprov destructor then attempts to unregister the extension from
res_phoneprov but because res_phoneprov is already cleaned up, its users
container is gone and we get a FRACK.
Simple solution, check for the NULL users container before attempting to remove
the entry. Duh.
Ran tests/res_phoneprov/res_phoneprov_provider. No leaks in
res_pjsip_phoneprov_provider and no FRACKs.
Reported-by: Corey Farrell
Tested-by: George Joseph
Review: https://reviewboard.asterisk.org/r/4608/
ASTERISK-24935 #close
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434545 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds a new session supplement that handles in-dialog OPTIONS
requests. Said OPTIONS requests are sent a 200 OK, as an endpoint lookup
for the OPTIONS request would already have been done by the time the
session supplement receives the inbound request.
ASTERISK-24862 #close
Reported by: yaron nahum
patches:
res_pjsip_dlg_options.c submitted by yaron nahum (License 6676)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434506 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fixes autological comparison warnings in the following:
* chan_skinny: letohl may return a signed or unsigned value, depending on the
macro chosen
* func_curl: Provide a specific cast to CURLoption to prevent mismatch
* cel: Fix enum comparisons where the enum can never be negative
* enum: Fix comparison of return result of dn_expand, which returns a signed
int value
* event: Fix enum comparisons where the enum can never be negative
* indications: tone_data.freq1 and freq2 are unsigned, and hence can never be
negative
* presencestate: Use the actual enum value for INVALID state
* security_events: Fix enum comparisons where the enum can never be negative
* udptl: Don't bother to check if the return value from encode_length is less
than 0, as it returns an unsigned int
* translate: Since the parameters are unsigned int, don't bother checking
to see if they are negative. The cast to unsigned int would already blow
past the matrix bounds.
* res_pjsip_exten_state: Use a temporary value to cache the return of
ast_hint_presence_state
* res_stasis_playback: Fix enum comparisons where the enum can never be
negative
* res_stasis_recording: Add an enum value for the case where the recording
operation is in error; fix enum comparisons
* resource_bridges: Use enum value as opposed to -1
* resource_channels: Use enum value as opposed to -1
Review: https://reviewboard.asterisk.org/r/4533
ASTERISK-24917
Reported by: dkdegroot
patches:
rb4533.patch submitted by dkdegroot (License 6600)
........
Merged revisions 434469 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434470 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Without this patch, if a PJSIP endpoint with udptl enabled and authentication
set attempted to use sendFax, the FAX session would fail during setup. This
was because the invite issued in response to being auth challenged would cause
the PJSIP channel performing the FAX to receive a second T38 framehook and
this would cause frames to be consumed in an inappropriate manner.
ASTERISK-24933 #close
Reported by: Jonathan Rose
Review: https://reviewboard.asterisk.org/r/4577/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434425 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes several warnings pointed out by the clang compiler.
* chan_pjsip: Removed check for data->text, as it will always be non-NULL.
* app_minivm: Fixed evaluation of etemplate->locale, which will always
evaluate to 'true'. This patch changes the evaluation to use
ast_strlen_zero.
* app_queue:
- Fixed evaluation of qe->parent->monfmt, which always evaluates to
true. Instead, we just check to see if the dereferenced pointer
evaluates to true.
- Fixed evaluation of mem->state_interface, wrapping it with a call to
ast_strlen_zero.
* res_smdi: Wrapped search_msg->mesg_desk_term with calls to ast_strlen_zero.
Review: https://reviewboard.asterisk.org/r/4541
ASTERISK-24917
Reported by: dkdegroot
patches:
rb4541.patch submitted by dkdegroot (License 6600)
........
Merged revisions 434285 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434286 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If we receive a MESSAGE request that we cannot send a response
to, we should not send the incoming MESSAGE to the dialplan.
This commit should help the bouncing message_retrans test to
pass consistently.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434218 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For some applications - such as SLA - a phone pressing hold should not behave
in the fashion that the Asterisk core would like it to. Instead, the hold
action has some application specific behaviour associated with it - such as
disconnecting the channel that initiated the hold; only playing MoH to channels
in the bridge if the channels are of a particular type, etc.
One way of accomplishing this is to use a framehook to intercept the
hold/unhold frames, raise an event, and eat the frame. Tasty. This patch
accomplishes that using a new dialplan function, HOLD_INTERCEPT.
In addition, some general cleanup of raising hold/unhold Stasis messages was
done, including removing some RAII_VAR usage.
Review: https://reviewboard.asterisk.org/r/4549/
ASTERISK-24922 #close
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434216 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When setting the configuration option 'timers' equal to 'no' the bit flag was
not properly negated. This patch clears all associated flags and only sets the
specified one. pjsip will handle any necessary flag combinations. Also went
ahead and did similar for the '100rel' option.
ASTERISK-24910 #close
Reported by: Ray Crumrine
Review: https://reviewboard.asterisk.org/r/4582/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434131 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes a warning caught by clang, in which it detected that large
chunks of extconf were unused. Frankly, I wish we could pretend that all of
extconf was unused, but alas, that is not yet the case.
A few extraneous functions in the parking tests were removed as well, for
the same reason.
Review: https://reviewboard.asterisk.org/r/4553
ASTERISK-24917
Reported by: dkdegroot
patches:
rb4553.patch submitted by dkdegroot (License 6600)
........
Merged revisions 434093 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434097 65c4cc65-6c06-0410-ace0-fbb531ad65f3
res_pjsip_phoneprov_provider is using ao2_callback with OBJ_MULTIPLE, then
ignoring the return. OBJ_NODATA flag was to prevent a reference leak, but
this caused the module to FRACK on unload. Revert change until this can
be investigated further.
ASTERISK-24935
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/4578/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434025 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is a change to align behavior with that of Asterisk 11 and previous versions.
In those versions, if a parked call were retrieved, and the call ended, the parked
call retriever would be hung up after the ParkedCall application ran. Prior to this
patch, in Asterisk 13, the same situation would result in the parked call retriever
falling through to additional priorities in the extension where the ParkedCall
application was called. With this patch, the behavior between Asterisk 11 and 13
aligns.
ASTERISK-24899 #close
Reported by Malcolm Davenport
Patches:
ASTERISK-24899.patch uploaded by Mark Michelson(license #5049)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434022 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Outbound SIP MESSAGEs had the potential to be sent out
of order from how they were specified in a set of
dialplan steps.
This change creates a serializer for sending outbound
MESSAGE requests on. This ensures that the MESSAGEs are
sent by Asterisk in the same order that they were sent
from the dialplan.
ASTERISK-24937 #close
Reported by Mark Michelson
Review: https://reviewboard.asterisk.org/r/4579
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433968 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes some invalid enum conversion warnings caught by clang. In
particular:
* chan_sip: Several functions mixed usage of the st_refresher_param
enum and st_refresher enum. This patch corrects the functions to use the
right enum.
* chan_pjsip: Fixed mixed usage of ast_sip_session_t38state and ast_t38_state.
* strings: Fixed incorrect usage of AO2 flags with strings container.
* res_stasis: Change a return enumeration to stasis_app_user_event_res.
Review: https://reviewboard.asterisk.org/r/4535
ASTERISK-24917
Reported by: dkdegroot
patches:
rb4535.patch submitted by dkdegroot (License 6600)
........
Merged revisions 433746 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433747 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes clange compiler warnings for initializer overrides.
Specifically:
res_pjsip/config_transport maps PJSIP_TLSV1_METHOD to the same enumeration
value as PJSIP_SSL_DEFAULT_METHOD. When initializing an array containing
those enum values, we therefore initialize the value twice to two different
values, "tlsv1" and "default". This patch changes it to just initialize
the index in the array to "tlsv1".
Review: https://reviewboard.asterisk.org/r/4539/
ASTERISK-24917
Reported by: dkdegroot
patches:
rb4539.patch submitted by dkdegroot (License 6600)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433682 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk had an issue where retransmissions of MESSAGE requests resulted in
Asterisk processing the retransmission as if it were a new MESSAGE request.
This patch fixes the issue by creating a transaction in PJSIP on the incoming
request. This way, if a retransmission arrives, the PJSIP transaction layer
will resend the response and Asterisk will not ever see the retransmission.
ASTERISK-24920 #close
Reported by Mark Michelson
Review: https://reviewboard.asterisk.org/r/4532/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433619 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch updates the kqueue timing module to conform to current timer API.
This fixes issues with using the kqueue timing source on Asterisk 13 on
FreeBSD 10. These issues include:
- Remove support for kevent64(). The values used to support Asterisk timers
fit within 32bits and so can be handled on all platforms via kevent().
- Provide debug logging for, but do not track, unacked events. This matches
the behavior of all other timer implementations.
- Implement continuous mode by triggering and leaving active, a user event.
This ensures that the file descriptor for the timer returns immediately from
poll(), without placing the load of a high speed timer on the kernel.
- In kqueue_timer_get_max_rate(), don't overstate the capability of the timer.
On some platforms, UINT_MAX is greater than INTPTR_MAX, the largest integer
type kqueue supports for timers.
- In kqueue_timer_get_event(), assume the caller woke up from poll() and just
return the mode the timer is currently in. This matches all other timer
implementations.
- Adjust the test code now that unacked events are not tracked.
Review: https://reviewboard.asterisk.org/r/4465/
ASTERISK-24857 #close
Reported by: scsiguy
Tested by: Ed Hynan
patches:
rb4465.patch submitted by scsiguy (License 6692)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433574 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Move most of res_pjsip:module_unload to unload_pjsip to resolve crashes
caused by running PJSIP functions from non-PJSIP threads.
* Remove call to pjsip_endpt_destroy(ast_pjsip_endpoint), it was causing
crashes in some cases. In theory pj_shutdown() should take care of this.
* Mark res_pjsip_keepalive and res_pjsip_session as allowed to unload at
shutdown.
* Resolve leaked config global in res_pjsip_notify.
* Unregister pubsub pjsip service module.
* Implement cleanup for res_pjsip_session.
ASTERISK-24731 #close
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/4498/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433469 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* In res/res_sorcery_realtime.c: Broke long line.
* In main/bucket.c: Eliminated unnecessary NULL check as
ast_sorcery_unref() is NULL tolerant and set the global object to NULL
after unref in the system shutdown bucket_cleanup().
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433420 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Due to a quirk in the configuration handling of res_xmpp, the 'autoregister'
setting was never actually processed. This was due to not properly copying
over the global settings to the client settings when applying the
configuration to the run-time object.
Review: https://reviewboard.asterisk.org/r/4496/
ASTERISK-14233
ASTERISK-24780 #close
Reported by: Simon Arlott
patches:
asterisk-13.1.0-24780 uploaded by Simon Arlott (License 5756)
........
Merged revisions 433395 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433396 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Incoming PJSIP call legs that have not been answered yet send unnecessary
"180 Ringing" or "183 Progress" messages every time a connected line
update happens. If the outgoing channel is also PJSIP then the incoming
channel will always send a "180 Ringing" or "183 Progress" message when
the outgoing channel sends the INVITE.
Consequences of these unnecessary messages:
* The caller can start hearing ringback before the far end even gets the
call.
* Many phones tend to grab the first connected line information and refuse
to update the display if it changes. The first information is not likely
to be correct if the call goes to an endpoint not under the control of the
first Asterisk box.
When connected line first went into Asterisk in v1.8, chan_sip received an
undocumented option "rpid_immediate" that defaults to disabled. When
enabled, the option immediately passes connected line update information
to the caller in "180 Ringing" or "183 Progress" messages as described
above.
* Added "rpid_immediate" option to prevent unnecessary "180 Ringing" or
"183 Progress" messages. The default is "no" to disable sending the
unnecessary messages.
ASTERISK-24781 #close
Reported by: Richard Mudgett
Review: https://reviewboard.asterisk.org/r/4473/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433338 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Valgrind found some memory leaks associated with
ast_pjsip_rdata_get_endpoint(). The leaks would manifest when sending
responses to OPTIONS requests, processing MESSAGE requests, and
res_pjsip supplements implementing the incoming_request callback.
* Fix ast_pjsip_rdata_get_endpoint() endpoint ref leaks in
res/res_pjsip.c:supplement_on_rx_request(),
res/res_pjsip/pjsip_options.c:send_options_response(),
res/res_pjsip_messaging.c:rx_data_to_ast_msg(), and
res/res_pjsip_messaging.c:send_response().
* Eliminated RAII_VAR() use with ast_pjsip_rdata_get_endpoint() in
res/res_pjsip_nat.c:nat_on_rx_message().
* Fixed inconsistent but benign return value in
res/res_pjsip/pjsip_options.c:options_on_rx_request().
Review: https://reviewboard.asterisk.org/r/4511/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433222 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Valgrind found a memory leak and invalid access.
* Fix invalid access by sscanf() being fed a non-nul terminated string of
digits in res/res_pjsip_sdp_rtp.c:get_codecs().
* Fix memory leak in main/sorcery.c:sorcery_object_field_destructor().
* Fix potential NULL pointer dereference in
main/xmldoc.c:xmldoc_get_syntax_config_option().
Review: https://reviewboard.asterisk.org/r/4513/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433199 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Valgrind found some memory leaks associated with ast_sockaddr_resolve().
Most of the leaks had already been fixed by earlier memory leak hunt
patches. This patch performs an audit of ast_sockaddr_resolve() and found
one more.
* Fix ast_sockaddr_resolve() memory leak in
apps/app_externalivr.c:app_exec().
* Made main/netsock2.c:ast_sockaddr_resolve() always set the addrs
parameter for safety so the pointer will never be uninitialized on return.
The same goes for res/res_pjsip_acl.c:extract_contact_addr().
* Made functions that call ast_sockaddr_resolve() with RAII_VAR()
controlling the addrs variable use ast_free instead of ast_free_ptr to
provide better MALLOC_DEBUG information.
Review: https://reviewboard.asterisk.org/r/4509/
........
Merged revisions 433056 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433057 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Updated some documentation stating that endpoint identifiers registered without
a name are place at the front of the lookup list. Also renamed register method
'ast_sip_register_endpoint_identifier_by_name' to
'ast_sip_register_endpoint_identifier_with_name'
ASTERISK-24840
Reported by: Mark Michelson
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433031 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes previously reverted code that caused binary incompatibility
problems with some modules. And like the original patch it makes sure that
no matter what order the endpoint identifier modules were loaded, priority is
given based on the ones specified in the new global 'endpoint_identifier_order'
option.
ASTERISK-24840
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/4489/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433028 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The res_pjsip modules were manually checking both name and number
presentation values when there is a function that determines the combined
presentation for a party ID struct. The function takes into account if
the name or number components are valid while the manual code rarely
checked if the data was even valid.
* Made use ast_party_id_presentation() rather than manually checking party
ID presentation values.
* Ensure that set_id_from_pai() and set_id_from_rpid() will not return
presentation values other than what is pulled out of the SIP headers. It
is best if the code doesn't assume that AST_PRES_ALLOWED and
AST_PRES_USER_NUMBER_UNSCREENED are zero.
* Fixed copy paste error in add_privacy_params() dealing with RPID
privacy.
* Pulled the id->number.valid test from add_privacy_header() and
add_privacy_params() up into the parent function add_id_headers() to skip
adding PAI/RPID headers earlier.
* Made update_connected_line_information() not send out connected line
updates if the connected line number is invalid. Lower level code would
not add the party ID information and thus the sent message would be
unnecessary.
* Eliminated RAII_VAR usage in send_direct_media_request().
Review: https://reviewboard.asterisk.org/r/4472/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432892 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Due to a break in binary compatibility with some other modules these changes
are being reverted until the issue can be resolved.
ASTERISK-24840
Reported by: Mark Michelson
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432868 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a type=global section is not defined in pjsip.conf the global
defaults are not applied. As a result the mandatory Max-Forwards header
is not added to SIP messages for res_pjsip/chan_pjsip.
The handling of pjsip.conf type=global objects has several problems:
1) If the global object is missing the defaults are not applied.
2) If the global object is missing the default_outbound_endpoint's default
value is not returned by ast_sip_global_default_outbound_endpoint().
3) Defines are needed so default values only need to be changed in one
place.
* Added a sorcery instance observer callback to check if there were any
type=global sections loaded. If there were more than one then issue an
error message. If there were none then apply the global defaults.
* Fixed ast_sip_global_default_outbound_endpoint() to return the
documented default when no type=global object is defined.
* Made defines for the global default values.
* Increased the default_useragent[] size because SVN version strings can
get lengthy and 128 characters may not be enough.
* Fixed an off-nominal code path ref leak in global_alloc() if the string
fields fail to initialize.
* Eliminated RAII_VAR in get_global_cfg() and
ast_sip_global_default_outbound_endpoint().
ASTERISK-24807 #close
Reported by: Anatoli
Review: https://reviewboard.asterisk.org/r/4467/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432766 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When escaping backslashes with MySQL, the proper way to escape the characters
in a LIKE clause is to escape the '\' four times, i.e., '\\\\'. To quote the
MySQL manual:
"Because MySQL uses C escape syntax in strings (for example, “\n” to represent
a newline character), you must double any “\” that you use in LIKE strings.
For example, to search for “\n”, specify it as “\\n”. To search for “\”,
specify it as “\\\\”; this is because the backslashes are stripped once by the
parser and again when the pattern match is made, leaving a single backslash to
be matched against."
ASTERISK-24808 #close
Reported by: Javier Acosta
patches:
res_config_odbc.diff uploaded by Javier Acosta (License 6690)
........
Merged revisions 432720 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432721 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A race condition happened between initiating a transfer and requesting
that a dialog termination be delayed. Occasionally, the transferrer
channels would exit the bridge and hangup before the dialog termination
delay was requested.
* Made request dialog termination delay before initiating the transfer
action. If the transfer fails then cancel the delayed dialog termination
request.
ASTERISK-24755 #close
Reported by: John Bigelow
Review: https://reviewboard.asterisk.org/r/4460/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432668 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It's possible to have a scenario that will create a conflict between endpoint
identifiers. For instance an incoming call could be identified by two different
endpoint identifiers and the one chosen depended upon which identifier module
loaded first. This of course causes problems when, for example, the incoming
call is expected to be identified by username, but instead is identified by ip.
This patch adds a new 'global' option to res_pjsip called
'endpoint_identifier_order'. It is a comma separated list of endpoint
identifier names that specifies the order by which identifiers are processed
and checked.
ASTERISK-24840 #close
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/4455/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432638 65c4cc65-6c06-0410-ace0-fbb531ad65f3
As pjproject is now used as a shared library a different define,
HAVE_PJPROJECT, is used to specify if pjproject is present.
ASTERISK-24830 #close
Reported by: Stefan Engström
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432614 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Made safely get the TRANSFER_CONTEXT channel value while the channel is
locked in refer_incoming_attended_request() and
refer_incoming_blind_request(). The pointer returned by
pbx_builtin_getvar_helper() is only valid while the channel is locked.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432594 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Unfortunately, while initial testing with ConfBridge did not reproduce the
audio problem alluded to in the comment in res_pjsip_sdp_rtp, further testing
did show that bridge_softmix and/or ConfBridge has a severe problem bridging
two or more participants at different sampling rates. Sometimes, it even picks
odd sampling rates that cause hideous audio problems.
This patch backs out the offending portion of the code until the issues in
the affected bridging modules can be more properly analyzed.
ASTERISK-24841
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432423 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Sending the following ARI commands caused Asterisk to crash if the JSON
body 'variables' object passes values of types other than strings.
POST /ari/channels
POST /ari/channels/{channelid}
PUT /ari/endpoints/sendMessage
PUT /ari/endpoints/{tech}/{resource}/sendMessage
* Eliminated RAII_VAR usage in ast_ari_channels_originate_with_id(),
ast_ari_channels_originate(), ast_ari_endpoints_send_message(), and
ast_ari_endpoints_send_message_to_endpoint().
ASTERISK-24751 #close
Reported by: jeffrey putnam
Review: https://reviewboard.asterisk.org/r/4447/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432404 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Some WebSocket applications, like [chan_respoke][], require a larger
frame size than the default 8k; this patch bumps the default to 16k.
This patch also fixes some problems exacerbated by large frames.
The sanity counter was decremented on every fread attempt in
ws_safe_read(), regardless of whether data was read from the socket or
not. For large frames, this could result in loss of sanity prior to
reading the entire frame. (16k frame / 1448 bytes per segment = 12
segments).
This patch changes the sanity counter so that it only decrements when
fread() doesn't read any bytes. This more closely matches the original
intention of ws_safe_read(), given that the error message is
"Websocket seems unresponsive".
This patch also properly logs EOF conditions, so disconnects are no
longer confused with unresponsive connections.
[chan_respoke]: https://github.com/respoke/chan_respoke
Review: https://reviewboard.asterisk.org/r/4431/
........
Merged revisions 432236 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432237 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch addresses the following problems:
* ari/resource_channels: In ARI, we currently create a format capability
structure of SLIN and apply it to the new channel being created. This was
originally done when the PBX core was used to create the channel, as there
was a condition where a newly created channel could be created without any
formats. Unfortunately, now that the Dial API is being used, this has two
drawbacks:
(a) SLIN, while it will ensure audio will flows, can cause a lot of
needless transcodings to occur, particularly when a Local channel is
created to the dialplan. When no format capabilities are available, the
Dial API handles this better by handing all audio formats to the requsted
channels. As such, we defer to that API to provide the format
capabilities.
(b) If a channel (requester) is causing this channel to be created, we
currently don't use its format capabilities as we are passing in our own.
However, the Dial API will use the requester channel's formats if none
are passed into it, and the requester channel exists and has format
capabilities. This is the "best" scenario, as it is the most likely to
create a media path that minimizes transcoding.
Fixing this simply entails removing the providing of the format capabilities
structure to the Dial API.
* chan_pjsip: Rather than blindly picking the first format in the format
capability structure - which actually *can* be a video or text format - we
select an audio format, and only pick the first format if that fails. That
minimizes the weird scenario where we attempt to transcode between video/audio.
* res_pjsip_sdp_rtp: Applied the joint capapbilites to the format structure.
Since ast_request already limits us down to one format capability once the
format capabilities are passed along, there's no reason to squelch it here.
* channel: Fixed a comment. The reason we have to minimize our requested
format capabilities down to a single format is due to Asterisk's inability
to convey the format to be used back "up" a channel chain. Consider the
following:
PJSIP/A => L;1 <=> L;2 => PJSIP/B
g,u,a g,u,a g,u,a u
That is, we have PJSIP/A dialing a Local channel, where the Local;2 dials
PJSIP/B. PJSIP/A has native format capabilities g722,ulaw,alaw; the Local
channel has inherited those format capabilities down the line; PJSIP/B
supports only ulaw. According to these format capabilities, ulaw is
acceptable and should be selected across all the channels, and no
transcoding should occur. However, there is no way to convey this: when L;2
and PJSIP/B are put into a bridge, we will select ulaw, but that is not
conveyed to PJSIP/A and L;1. Thus, we end up with:
PJSIP/A <=> L;1 <=> L;2 <=> PJSIP/B
g g X u u
Which causes g722 to be written to PJSIP/B.
Even if we can convey the 'ulaw' choice back up the chain (which through
some severe hacking in Local channels was accomplished), such that the chain
looks like:
PJSIP/A <=> L;1 <=> L;2 <=> PJSIP/B
u u u u
We have no way to tell PJSIP/A's *channel driver* to Answer in the SDP back
with only 'ulaw'. This results in all the channel structures being set up
correctly, but PJSIP/A *still* sending g722 and causing the chain to fall
apart.
There's a lot of difficulty just in setting this up, as there are numerous
race conditions in the act of bridging, and no clean mechanism to pass the
selected format backwards down an established channel chain. As such, the
best that can be done at this point in time is clarifying the comment.
Review: https://reviewboard.asterisk.org/r/4434/
ASTERISK-24812 #close
Reported by: Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432195 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change makes it so that if a channel variable is requested and it does not exist
a 404 response will be returned instead of an allocation failed response. This makes
it easier to debug and figure out what is going on for a user.
ASTERISK-24677 #close
Reported by: Joshua Colp
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432154 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Some implementations don't pay attention to the expires for individual contacts.
In this case they may consider the lack of an Expires header in the 200 OK as
unregistered. This change makes it so if an Expires header is present in the REGISTER
we will add one in the 200 OK.
ASTERISK-24785 #close
Reported by: Ross Beer
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432136 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Matt Hoskins reported that res_pjsip_publish_asterisk wouldn't pull config from
realtime. Turns out it was just missing a call ast_sorcery_apply_config().
res_pjsip_acl was missing it as well, so I added it. The other pjsip modules
looked OK.
ASTERISK-24811 #close
Reported-by: Matt Hoskins
Tested-by: George Joseph
Tested-by: Matt Hoskins
patches:
res_pjsip_publish_asterisk.c.patch submitted by Matt Hoskins (license 6688)
Review: https://reviewboard.asterisk.org/r/4433/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432033 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed hangup handling of the session->channel after answer if the
ast_channel_move() or ast_bridge_impart() fails. We are still the thread
controlling the session->channel so we need to call ast_hangup() to kill
the channel.
* Fixed debug messages in refer_incoming_invite_request() referencing
incorrect channnels on success. Code comments now say why the
session->channel cannot be used.
Review: https://reviewboard.asterisk.org/r/4422/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431956 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Analyzing a one-off crash on a busy system showed that processing a REFER
request had a NULL session channel pointer. The only way I can think of
that could cause this is if an outgoing BYE transaction overlapped the
incoming REFER transaction in a collision. Asterisk sends a BYE while the
phone sends a REFER to complete an attended transfer.
* Made check the session channel pointer before processing an incoming
REFER request in res_pjsip_refer.
* Fixed similar crash potential for res_pjsip supplement incoming request
processing for res_pjsip_sdp_rtp INFO, res_pjsip_caller_id INVITE/UPDATE,
res_pjsip_messaging MESSAGE, and res_pjsip_send_to_voicemail REFER
messages.
* Made res_pjsip_messaging respond to a message body too large with a 413
instead of ignoring it.
ASTERISK-24700 #close
Reported by: Zane Conkle
Review: https://reviewboard.asterisk.org/r/4417/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431898 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When RTCP debugging was enabled, an RTCP report without a report block would
cause a crash. This was due to the verbose output not checking to see if the
report_block pointer was NULl before dereferencing it.
This patch adds the necessary check to prevent printing any verbose output
if the far side hasn't provided us the information they should have.
ASTERISK-24791 #close
Reported by: JoshE
Tested by: JoshE
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431879 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The res_sorcery_config module currently uses a fixed bucket
size of 53. This means that depending on the number of objects
you either end up with excess buckets or a lot of collisions.
Due to the way that res_sorcery_config is implemented it's actually
possible to make the bucket size dynamic based on the number of
objects. This is due to the fact that each loading of the config file
produces a new container and does not modify the existing one.
This change uses the number of expected objects and finds a prime
number near it. In practice depending on the number of objects this
can speed up lookups anywhere from 2X to 15X. This change also removes
the lock from the container as it is not needed.
Review: https://reviewboard.asterisk.org/r/4423/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431841 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When debugging things it can be useful to know absolutely what
version of pjproject res_pjsip is running against. This change
adds a "pjsip show version" CLI command which can be used to
query for this.
ASTERISK-24685 #close
Reported by: Joshua Colp
Review: https://reviewboard.asterisk.org/r/4424/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431824 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During some refactoring the way private information for timers
was stored was changed. As a result of this the action which normally
removed the timer upon closure in res_timing_pthread was also removed
causing the timer to remain after it should using up resources.
This change ensures that the timer is removed upon closure.
ASTERISK-24768 #close
Reported by: Matthias Urlichs
patches:
timer.patch submitted by Matthias Urlichs (license 5508)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431807 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A multi-asterisk box setup with direct media enabled would occasionally
crash when two re-INVITE collisions on a call leg happen in a row.
The re-INVITE logic only had one timer struct to defer the re-INVITE.
When the second collision happens the timer struct is overwritten and put
into the timer heap again. Resources for the first timer are leaked and
the heap has two positions occupied by the same timer struct. Now the
heap ordering is potentially corrupted, the timer will fire twice, and any
resources allocated for the second timer will be released twice.
* The solution is to put the collided re-INVITE into the delayed requests
queue with all the other delayed requests and cherry pick the next request
that can come off the queue when an event happens.
* Changed to put delayed BYE requests at the head of the delayed queue.
There is no sense in processing delayed UPDATEs and re-INVITEs when a BYE
has been requested.
* Made the start of a BYE request flush the delayed requests queue to
prevent a delayed request from overlapping the BYE transaction. I saw a
few cases where a delayed re-INVITE got started after the BYE transaction
started.
* Changed the delayed_request struct to use an enum instead of a string
for the request method. Cherry picking the queue is easier with an enum
than string comparisons and the compiler can warn if a switch statement
does not cover all defined enum values.
* Improved the debug output to give more information. It helps to know
which channel is involved with an endpoint. Trunks can have many channels
associated with the endpoint at the same time.
ASTERISK-24727 #close
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/4414/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431734 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds a new feature to ARI to redirect a channel to another server,
and fixes a few bugs in PJSIP's handling of the Transfer dialplan
application/ARI redirect capability.
*New Feature*
A new operation has been added to the ARI channels resource, redirect. With
this, a channel in a Stasis application can be redirected to another endpoint
of the same underlying channel technology.
*Bug fixes*
In the process of writing this new feature, two bugs were fixed in the PJSIP
stack:
(1) The existing .transfer channel callback had the limitation that it could
only transfer channels to a SIP URI, i.e., you had to pass
'PJSIP/sip:foo@my_provider.com' to the dialplan application. While this is
still supported, it is somewhat unintuitive - particularly in a world full
of endpoints. As such, we now also support specifying the PJSIP endpoint to
transfer to.
(2) res_pjsip_multihomed was, unfortunately, trying to 'help' a 302 redirect by
updating its Contact header. Alas, that resulted in the forwarding
destination set by the dialplan application/ARI resource/whatever being
rewritten with very incorrect information. Hence, we now don't bother
updating an outgoing response if it is a 302. Since this took a looong time
to find, some additional debug statements have been added to those modules
that update the Contact headers.
Review: https://reviewboard.asterisk.org/r/4316/
ASTERISK-24015 #close
Reported by: Private Name
ASTERISK-24703 #close
Reported by: Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431717 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There have been a couple of times where a crash occurred in the dtls_handler
section of the code for res_pjsip. Unfortunately, in working this issue the
problem was unable to be reproduced. After looking at the backtraces and
through the code the current best guess as to why this happened might be due
to a reentrance problem and the strtok function. So, the current fix is to
convert the strtok function into the reentrant version of the function,
strtok_r.
ASTERISK-24741 #close
Reported by: Zane Conkle
Review: https://reviewboard.asterisk.org/r/4409/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431698 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are three CLI commands to stop and restart Asterisk each.
1) core stop/restart now - Hangup all calls and stop or restart Asterisk.
New channels are prevented while the shutdown request is pending.
2) core stop/restart gracefully - Stop or restart Asterisk when there are
no calls remaining in the system. New channels are prevented while the
shutdown request is pending.
3) core stop/restart when convenient - Stop or restart Asterisk when there
are no calls in the system. New calls are not prevented while the
shutdown request is pending.
ARI has made stopping/restarting Asterisk more problematic. While a
shutdown request is pending it is desirable to continue to process ARI
HTTP requests for current calls. To handle the current calls while a
shutdown request is pending, a new committed to shutdown phase is needed
so ARI applications can deal with the calls until the system is fully
committed to shutdown.
* Added a new shutdown committed phase so ARI applications can deal with
calls until the final committed to shutdown phase is reached.
* Made refuse new HTTP requests when the system has reached the final
system shutdown phase. Starting anything while the system is actively
releasing resources and unloading modules is not a good thing.
* Split the bridging framework shutdown to not cleanup the global bridging
containers when shutting down in a hurry. This is similar to how other
modules prevent crashes on rapid system shutdown.
* Moved ast_begin_shutdown(), ast_cancel_shutdown(), and
ast_shutting_down(). You should not have to include channel.h just to
access these system functions.
ASTERISK-24752 #close
Reported by: Matthew Jordan
Review: https://reviewboard.asterisk.org/r/4399/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431692 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Joshua Colp
tcambron
George Joseph
Matt Jordan
Alexander Traud
Richard Mudgett
Kevin Harwell
David M. Lee
Corey Farrell
Mark Michelson
Steve Davies
StefanEng86
Scott Griepentrog
Jonathan Rose
Martin Tomec
Scott Emidy
Mark Duncan
Benjamin Ford
Michael Cargile
Walter Doekes
Ivan Poddubny
demon-ru
Yousf Ateya
Sean Bright
Ashley Sanders
Diederik de Groot
Scott Griepentrog
David M. Lee