28537 Commits (442b597929c8d81fc41a9cbd8439e6ec215ba9ea)

 

All Branches   

Search

Author	SHA1	Message	Date
George Joseph	442b597929	alembic: Allow cdr, config and voicemail to exist in the same schema ... cdr, config and voicemail are all separate alembic trees. Because alembic's default is to use a table named 'alembic_version' to store the current tree revision, the 3 trees can't exist in the same schema without stepping on each other. Now each tree uses 'alembic_version_<tree_name>' as the version table. Each tree's env.py script now first checks for 'alembic_version'. If it finds it AND its revision is in the tree's history, the script renames it to 'alembic_version_<tree_name>'. Regardless, the script then continues with the migration using 'alembic_version_<tree_name>' and creates that table if it's not found. The result is that if an existing 'alembic_version' table was found but it didn't belong to this tree, it's left alone and 'alembic_version_<tree_name>' is used or created. WARNING: If multiple trees are using the same schema, they MUST NOT CRU or D any objects with names that might exist in the other trees. An example would be 'yesno_values' type. If two trees perform operations on it, one tree could pull it out from under the other. Thankfully we currently don't share any names among cdr, config and voicemail. NOTE: Since the env.py scripts in each tree were identical, a common env.py has been placed in the ast-db-manage directory and a symlink to it has been placed in each tree directory. ASTERISK-24311 #close Reported-by: Dafi Ni Change-Id: I4d593f000350deb5d21a14fa1e9bc3896844d898	9 years ago
Joshua Colp	55e8c9eff2	Merge "chan_sip: Honor support of Symmetric Response (rport) for SIP requests."	9 years ago
Alexander Traud	c4268ec734	chan_sip: Honor support of Symmetric Response (rport) for SIP requests. ... In the SIP channel driver chan_sip, the default is "auto_force_rport". When no NAT was detected, for example in case of IPv6, Asterisk uses the IP address from the headers within the SIP-REGISTER for subsequent SIP signaling. When the remote party specifies support for Symmetric Response (RFC 3581) via the parameter "rport", Asterisk should not extract the port from the SIP headers but reuse the port of the transport. This did not happen because of a typo. ASTERISK-26438 #close Change-Id: If6e7891848aaf96666dee5305695f7c6667cd5a6	9 years ago
Joshua Colp	ac3c51f284	Merge "app_queue: Update dynamic members ringinuse on reload."	9 years ago
Corey Farrell	2a03575c30	astobj2: Add backtrace to log_bad_ao2. ... * Compile __ast_assert_failed unconditionally. * Use __ast_assert_failed to log messages from log_bad_ao2 * Remove calls to ast_assert(0) that happen after log_bad_ao2 was run. Change-Id: I48f1af44b2718ad74a421ff75cb6397b924a9751	9 years ago
Etienne Lessard	806d08b675	app_queue: Update dynamic members ringinuse on reload. ... Previously, when reloading the members of a queue, the members added statically (i.e. defined in queues.conf) would see their "ringinuse" value updated but not the members added dynamically. This change makes dynamic members ringuse value to be updated on reload. Note that it's impossible to add a dynamic member with a specific ringinuse value. For both static and dynamic members, the ringinuse value can always be changed later on with command like "queue set ringinuse" or with the AMI action "QueueMemberRingInUse". So it's possible this commit could break a user workflow if he was changing the ringinuse value of dynamic members via such commands and was also relying on the fact that a queue reload would not update the dynamic members ringinuse value. ASTERISK-26330 Change-Id: I3745cc9a06ba7e02c399636f1ee9e58c04081f3f	9 years ago
Joshua Colp	224c295292	Merge "core: Remove ABI effects of LOW_MEMORY."	9 years ago
Joshua Colp	73061091b5	Merge "Remove "format_ogg_opus: New format""	9 years ago
Joshua Colp	222f8b132a	Merge "download_externals: Fix issue with re-install"	9 years ago
Kevin Harwell	d31ffb421c	Remove "format_ogg_opus: New format" ... This reverts commit 40aa28131b. ASTERISK-26426 #close Change-Id: I81e55c3c512f1dd6f49896f0c6b97a07d74fd8f5	9 years ago
Corey Farrell	8c5c95ad89	core: Remove ABI effects of LOW_MEMORY. ... This allows asterisk to compiled with LOW_MEMORY to load modules built without LOW_MEMORY. ASTERISK-26398 #close Change-Id: I24b78ac9493ab933b11087a8b6794f3c96d4872d	9 years ago
George Joseph	a77ebb2017	download_externals: Fix issue with re-install ... Needed to ignore an xmlstarlet return code for optional element. Change-Id: I6a96f709b4b38c9a3f3dda4e8b07903787e16873 Reported-by: Dan Jenkins	9 years ago
Corey Farrell	2d2a8944be	logger: Output early verbose messages to console. ... Verbose messages should be printed to the console if the sublevel is less than option_verbose. This fix ensures the welcome message with copyright and license are printed at daemon and interactive rasterisk startup. ASTERISK-26410 #close Change-Id: Ia44235e30ec328aba92ea2c8a837b094e65c9a03	9 years ago
zuul	3f62485ba7	Merge "chan_sip: Resolve externhost not to IPv6; instead go for IPv4."	9 years ago
George Joseph	6d548e736b	Merge "codec_opus: Add download ability to menuselect"	9 years ago
George Joseph	c7e4e035a2	Merge "codec_opus: Replace res_format_attr_opus with the one from codec_opus"	9 years ago
George Joseph	d205d8d4a1	Merge "format_ogg_opus: New format"	9 years ago
George Joseph	c7ef1e0af3	codec_opus: Add download ability to menuselect ... Updated codecs/codecs.xml to add codec_opus to the external download list. ASTERISK-26409 Change-Id: Ia07b36539f30e852125fb2b94147dc9774df31a4 (cherry picked from commit 2cdab0e36eec4997ca3bd85aa09efc477038e31c) (cherry picked from commit e9684f3acd0e8def0df582c1505dd39dd3fd1610)	9 years ago
George Joseph	5cc3c6679f	codec_opus: Replace res_format_attr_opus with the one from codec_opus ... Preparation ASTERISK-26409 Change-Id: I9f20e7cce00c32464d9a180e81283d49d199d0a3 (cherry picked from commit 59f7662a93)	9 years ago
George Joseph	40aa28131b	format_ogg_opus: New format ... Add Ogg/Opus playback support. This uses libopusfile in order to be able to read .opus files and play them back. Writing/recording support is not present at this time. ASTERISK-26409 Change-Id: I8815d23345108d8ca7c0bd640f6a1ce6b4f56955 (cherry picked from commit daee8bbd5209b4158bc1785eede845a26e6cbeaa)	9 years ago
George Joseph	43901e9418	build_tools: Add ability to download variants to download_externals ... Some external packages have multiple variants that apply to different builds of asterisk. The DPMA for instance has a "bundled" variant that needs to be downloaded if asterisk was configured with --with-pjproject-bundled. There are 2 ways to specify variants: If you need the user to make the decision about which variant to download, simply create multiple menuselect "member" entries like so... <member name="res_digium_phone" displayname="..snipped.."> <support_level>external</support_level> <depend>xmlstarlet</depend> <depend>bash</depend> <defaultenabled>no</defaultenabled> </member> <member name="res_digium_phone-bundled" displayname="..snipped.."> <support_level>external</support_level> <depend>xmlstarlet</depend> <depend>bash</depend> <defaultenabled>no</defaultenabled> </member> Note that the second entry has "-<variant>" appended to the name. You can then use the existing menuselect facilities to restrict which members to enable or disable. Youy probably don't want the user to enable multiple at the same time. If you want to hide the details of the variants, the better way to do it is to create 1 member with "variant" elements. <member name="res_digium_phone" displayname="..snipped.."> <support_level>external</support_level> <depend>xmlstarlet</depend> <depend>bash</depend> <defaultenabled>no</defaultenabled> <member_data> <downloader> <variants> <variant tag="bundled" condition='[[ "$PJPROJECT_BUNDLED" = "yes" ]]'/> </variants> </downloader> </member_data> </member> The condition must be a bash expression suitable for use with an "if" statement. Any environment variable can be used plus those available in makeopts. In this case, if asterisk was configured with --with-pjproject-bundled the bundled variant will be automatically downloaded. Otherwise the normal version will be downloaded. Change-Id: I4de23e06d4492b0a65e105c8369966547d0faa3e	9 years ago
zuul	eeeff9487f	Merge "chan_sip: Address runaway when realtime peers subscribe to mailboxes"	9 years ago
zuul	91513c5e8d	Merge "channels/chan_pjsip: fix HANGUPCAUSE function bug."	9 years ago
Alexander Traud	5dd99465d3	chan_sip: Resolve externhost not to IPv6; instead go for IPv4. ... For the channel driver chan_sip, you specify externhost=example.com in sip.conf when your Asterisk is behind a NAT and your IP address is assigned dynamically. Or stated differently: You do not have a static IP address to use "externaddr" directly. This NAT support is quite handy but just about IPv4. Previously, Asterisk resolved "externhost" to any IP version. When the first DNS answer resolved to an IPv6, Asterisk sent an IPv6 in SIP/SDP for origin (o=) and connection (c=). This happened in outgoing SIP-REGISTER and while answering SIP-INVITE. If the remote peer is IPv4-only, it might not handle o=/c= with an IPv6. This change makes sure, no IPv6 is resolved anymore for "externhost". ASTERISK-18232 #close Reported by: Jacek Kowalski Tested by: Alexander Traud patches: changes.patch submitted by Alessandro Crespi Change-Id: If68eedbeff65bd1c1d8a9ed921c02ba464b32dac	9 years ago
George Joseph	d425971009	chan_sip: Address runaway when realtime peers subscribe to mailboxes ... Users upgrading from asterisk 13.5 to a later version and who use realtime with peers that have mailboxes were experiencing runaway situations that manifested as a continuous stream of taskprocessor congestion errors, memory leaks and an unresponsive chan_sip. A related issue was that setting rtcachefriends=no NEVER worked in asterisk 13 (since the move to stasis). In 13.5 and earlier, when a peer tried to register, all of the stasis threads would block and chan_sip would again become unresponsive. After 13.5, the runaway would happen. There were a number of causes... * mwi_event_cb was (indirectly) calling build_peer even though calls to mwi_event_cb are often caused by build_peer. * In an effort to prevent chan_sip from being unloaded while messages were still in flight, destroy_mailboxes was calling stasis_unsubscribe_and_join but in some cases waited forever for the final message. * add_peer_mailboxes wasn't properly marking the existing mailboxes on a peer as "keep" so build_peer would always delete them all. * add_peer_mwi_subs was unsubscribing existing mailbox subscriptions then just creating them again. All of this was causing a flood of subscribes and unsubscribes on multiple threads all for the same peer and mailbox. Fixes... * add_peer_mailboxes now marks mailboxes correctly and build_peer only deletes the ones that really are no longer needed by the peer. * add_peer_mwi_subs now only adds subscriptions marked as "new" instead of unsubscribing and resubscribing everything. It also adds the peer object's address to the mailbox instead of its name to the subscription userdata so mwi_event_cb doesn't have to call build_peer. With these changes, with rtcachefriends=yes (the most common setting), there are no leaks, locks, loops or crashes at shutdown. rtcachefriends=no still causes leaks but at least it doesn't lock, loop or crash. Since making rtcachefriends=no work wasnt in scope for this issue, further work will have to be deferred to a separate patch. Side fixes... * The ast_lock_track structure had a member named "thread" which gdb doesn't like since it conflicts with it's "thread" command. That member was renamed to "thread_id". ASTERISK-25468 #close Change-Id: I07519ef7f092629e1e844f855abd279d6475cdd0	9 years ago
Joshua Colp	8d5219e6b8	Merge "core: Ensure presencestate subtype and message are NULL."	9 years ago
Joshua Colp	cdf2522160	Merge "res_odbc: Make pooling option deprecation notice more useful."	9 years ago
Joshua Colp	8966c8ec5a	Merge "cdr_mysql: fix UTC support"	9 years ago
Aaron An	18a8ca06eb	channels/chan_pjsip: fix HANGUPCAUSE function bug. ... HANGUPCAUSE not return 'SIP 200 Ok' when dialed channel answered. This patch change the call order of ast_queue_control_data and ast_queue_control in chan_pjsip_incoming_response. ASTERISK-26396 #close Reported by: AaronAn Tested by: AaronAn Change-Id: Ide2d31723d8d425961e985de7de625694580be61	9 years ago
zuul	9ef0eb6487	Merge "logger: Simplify ast_callid handling code."	9 years ago
Joshua Colp	57b29f3b69	Merge "logger: Always enable verbose for console channel."	9 years ago
Joshua Colp	a805d779e8	core: Ensure presencestate subtype and message are NULL. ... When retrieving presence state information there is no guarantee that the subtype and message passed in are set to NULL. This change ensures they are. ASTERISK-26397 #close Change-Id: If38cd730e409e9a9b6eb9adef6591d15a9e61f86	9 years ago
zuul	ccc0bfa69c	Merge "logger: Fix default console settings."	9 years ago
zuul	4caee4a11b	Merge "core: Fix LOW_MEMORY missing symbol ast_pbx_uuid_get."	9 years ago
Joshua Colp	077caf566e	res_odbc: Make pooling option deprecation notice more useful. ... This changes the notice for the deprecation of the old pooling options to point to the new option for doing pooling. This gives a clearer direction as to what to look into. ASTERISK-26389 #close Change-Id: I2ca9cdfdcd75aec170a7db9d5ff69a4cd25b7c10	9 years ago
Joshua Colp	78b6190a11	odbc: Remove options that are no longer applicable. ... The pooling, shared_connection, limit, and idlecheck options are no longer used in res_odbc. ASTERISK-26389 Change-Id: I2fde7b467d01f9d1c82cc0a339bb4f7e1dd6bbe6	9 years ago
zuul	f84652bd81	Merge "asterisk.c: Non-root users also get the astcanary after core restart."	9 years ago
Corey Farrell	923edf2596	logger: Simplify ast_callid handling code. ... Routines responsible for managing ast_callid's are overly complicated. This is left-over code from when ast_callid was an AO2 object. Now that it is an integer the code can be reduced. ast_callid handler code no longer prints it's own error message upon failure to allocate threadstorage as ast_calloc would have already printed a message. Debug messages that were printed when TEST_FRAMEWORK was enabled have been also been removed. Change-Id: I65a768a78dc6cf3cfa071e97f33ce3dce280258e	9 years ago
Corey Farrell	5cb905a227	core: Fix LOW_MEMORY missing symbol ast_pbx_uuid_get. ... Move the function outside the conditional block that excludes LOW_MEMORY. ASTERISK-26273 #close Change-Id: Ic290fa128222c410c3531107e30efacabc8493b4	9 years ago
zuul	0df2373434	Merge "res_pjsip_multihomed: Change Contact port to listening port."	9 years ago
Corey Farrell	00f1d05d34	logger: Always enable verbose for console channel. ... Previous versions of Asterisk did not require verbose to be specified in logger.conf for the console channel, if it was requested by command line or asterisk.conf it just worked. This change causes Asterisk to always enable verbose in the console channel level mask. Verbose is displayed on consoles if requested by command line, option_verbose or 'core set verbose'. This also delays initialization of the logger until after threadstorage is initialized. Initializing too early can cause messages to be printed multiple times to the console (stdout). ASTERISK-26391 #close Change-Id: I52187d67c2fcb3efd5561bf04b3e5e23e5ee8a04	9 years ago
Corey Farrell	74f562a8e2	logger: Fix default console settings. ... When logger.conf is missing or invalid we should be printing notices, warnings and errors to the console. The logmask was incorrectly calculated. Change-Id: Ibaa9465a8682854bc1a5e9ba07079bea1bfb6bb3	9 years ago
zuul	ea8105cf5e	Merge "sd_notify (systemd status notifications) support"	9 years ago
zuul	0caf846aff	Merge "rtp: Only accept the first payload for a format in SDP."	9 years ago
zuul	d36da3a26b	Merge "Fix showing of swap details when sysinfo() is available"	9 years ago
Walter Doekes	0bc9912739	asterisk.c: Non-root users also get the astcanary after core restart. ... Without this change, a 'core restart' would kill the astcanary forever if you're not running as root. Both with and without this patch, the scheduling priority was still SCHED_RR after restart. Additionally, the astcanary is now spawned if you start with high priority and Asterisk doesn't get a chance to lower it. For example through: `chrt -r 10 sudo -u asterisk asterisk -c` Also reap killed astcanary processes on core restart. ASTERISK-26352 #close Change-Id: Iacb49f26491a0717084ad46ed96b0bea5f627a55	9 years ago
zuul	5f9ad3e57e	Merge "res_config_odbc.c: Fix buffer size limitation creating invalid SQL."	9 years ago
zuul	2360cd3ed2	Merge "asterisk.c: When astcanary dies on linux, reset priority on all threads."	9 years ago
Walter Doekes	bffaf46690	asterisk.c: When astcanary dies on linux, reset priority on all threads. ... Previously only the canary checking thread itself had its priority set to SCHED_OTHER. Now all threads are traversed and adjusted. ASTERISK-19867 #close Reported by: Xavier Hienne Change-Id: Ie0dd02a3ec42f66a78303e9c1aac28f7ed9aae39	9 years ago
Richard Mudgett	2820b13393	res_config_odbc.c: Fix buffer size limitation creating invalid SQL. ... Creating ODBC SQL queries resulted in queries too large to fit into the supplied buffer. The resulting truncated buffer contained an invalid SQL query. * Made SQL query generation code use a thread storage buffer that can increase in size as needed. * Fixed bad multi-line warning messages. ASTERISK-26263 #close Reported by: Jeppe Ryskov Larsen Change-Id: I23f3cdd43c2dac80bed3ded4dd77d18cb17f21ae	9 years ago