The reviewboard description does a fine job of summarizing this, so here it is:
A reporter discovered that Asterisk would crash when attempting to retransmit
a reinvite that had previously received a 491 response. The crash occurred
because a pjsip_tx_data structure was being saved for reuse, but its reference
count was not being increased. The result was that the pjsip_tx_data was being
freed before we were actually done with it. When we attempted to re-use the
structure when re-sending the reinvite, Asterisk would crash.
The fix implemented here is not to try holding onto the pjsip_tx_data at all.
Instead, when we reschedule sending the reinvite, we create a brand new
pjsip_tx_data and send that instead. Because of this change, there is no need
for an ast_sip_session_delayed_request structure to have a pjsip_tx_data on
it any more. So any code referencing its use has been removed.
When this initial fix was introduced, I encountered a second crash when
processing a subsequent 200 OK on a rescheduled reinvite. The reason was
that when rescheduling the reinvite, we gave the wrong location for a
response callback. This has been fixed in this patch as well.
ASTERISK-24556 #close
Reported by Abhay Gupta
Review: https://reviewboard.asterisk.org/r/4233
........
Merged revisions 429089 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429090 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This corrects several bugs that currently exist in the stasis
application code.
* After a masquerade, the resulting channels have channel topics that
do not match their uniqueids
** Masquerades now swap channel topics appropriately
* StasisStart and StasisEnd messages are leaked to observer
applications due to being published on channel topics
** StasisStart and StasisEnd publishing is now properly restricted
to controlling apps via app topics
* Race conditions exist where StasisStart and StasisEnd messages due to
a masquerade may be received out of order due to being published on
different topics
** These messages are now published directly on the app topic so this
is now a non-issue
* StasisEnds are sometimes missing when sent due to masquerades and
bridge swaps into and out of Stasis()
** This was due to StasisEnd processing adjusting message-sent flags
after Stasis() had already exited and Stasis() had been re-entered
** This was corrected by adjusting these flags prior to sending the
message while the initial Stasis() application was still shutting
down
Review: https://reviewboard.asterisk.org/r/4213/
ASTERISK-24537 #close
Reported by: Matt DiMeo
........
Merged revisions 429061 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 429062 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429063 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When repeatedly starting/stopping a Monitor on a channel, the accumulated
in/out sample counts are never reset to 0. This can cause inadvertent jumps
in the recordings, as the code in the channel core will determine incorrectly
that a jump in the recorded file position should occur. Setting the sample
counts to 0 simply reflects the initial state a Monitor should be in when it
is started, as this is the initial count that would be on the channels at that
time.
ASTERISK-24573 #close
Reported by: Nuno Borges
patches:
24573.patch uploaded by Nuno Borges (License 6116)
........
Merged revisions 429031 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 429032 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 429033 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429034 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are two methods within res_pjsip_refer for keeping track of the state of a transfer.
The first is a framehook which looks at frames passing by to determine the state. The second
subscribes to know when the channel joins a bridge. In the case when the channel joins the
bridge the framehook is *NOT* removed and this prevents the native RTP bridging technology
from getting used.
This change gets the channel and if it still exists remove the framehook.
Review: https://reviewboard.asterisk.org/r/4218/
........
Merged revisions 428760 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 428761 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428762 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, all Stasis subscriptions would receive a dedicated
thread for servicing published messages. In contrast, prior to r400178
(see review https://reviewboard.asterisk.org/r/2881/), the subscriptions
shared a thread pool. It was discovered during some initial work on Stasis
that, for a low subscription count with high message throughput, the
threadpool was not as performant as simply having a dedicated thread per
subscriber.
For situations where a subscriber receives a substantial number of messages
and is always present, the model of having a dedicated thread per subscriber
makes sense. While we still have plenty of subscriptions that would follow
this model, e.g., AMI, CDRs, CEL, etc., there are plenty that also fall into
the following two categories:
* Large number of subscriptions, specifically those tied to endpoints/peers.
* Low number of messages. Some subscriptions exist specifically to coordinate
a single message - the subscription is created, a message is published, the
delivery is synchronized, and the subscription is destroyed.
In both of the latter two cases, creating a dedicated thread is wasteful (and
in the case of a large number of peers/endpoints, harmful). In those cases,
having shared delivery threads is far more performant.
This patch adds the ability of a subscriber to Stasis to choose whether or not
their messages are dispatched on a dedicated thread or on a threadpool. The
threadpool is configurable through stasis.conf.
Review: https://reviewboard.asterisk.org/r/4193
ASTERISK-24533 #close
Reported by: xrobau
Tested by: xrobau
........
Merged revisions 428681 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 428687 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428688 65c4cc65-6c06-0410-ace0-fbb531ad65f3
As a result of https://reviewboard.asterisk.org/r/3305, res_sorcery_realtime
was tossing database fields that didn't have an exact match to a sorcery
registered field. This broke the ability to use regexes as field names which
manifested itself as a failure of res_pjsip_phoneprov_provider which uses
this capability. It also broke handling of fields that start with '@' in
realtime but I don't think anyone noticed.
This patch does the following...
* Modifies ast_sorcery_fields_register to pre-compile the name regex.
* Modifies ast_sorcery_is_object_field_registered to test the regex if it
exists instead of doing an exact strcmp.
* Modifies res_pjsip_phoneprov_provider with a few tweaks to get it to work
with realtime.
Tested-by: George Joseph
Review: https://reviewboard.asterisk.org/r/4185/
........
Merged revisions 428543 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 428544 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428545 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The implementation of INVITE with Replaces in res_pjsip_refer did not expect them to
occur in-dialog. As a result it would incorrectly attempt to hang up a channel it
thought was under its control. In reality the channel would be under the control of
another thread. When the other thread accessed the channel it would be accessing freed
memory and could crash.
This change makes res_pjsip_refer not act on an in-dialog INVITE with Replaces.
ASTERISK-24528 #close
Reported by: Joshua Colp
........
Merged revisions 428304 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 428305 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428306 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change enforces the requirements in PJSIP for session timer configuration. The minimum
expiration period must be 90 seconds or higher and the normal expiration period can not
be lower than the minimum expiration period. If either of these were done the code would
assert at session setup time.
ASTERISK-24336 #close
Reported by: Leon Rowland
........
Merged revisions 427978 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 427979 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427980 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From reviewboard:
"During blind transfer testing, it was noticed that tests were failing
occasionally because the ARI blind transfer event was not being sent.
After investigating, I detected a race condition in the blind transfer
code. When blind transferring a single channel, the actual transfer
operation (i.e. removing the transferee from the bridge and directing
them to the proper dialplan location) is queued onto the transferee
bridge channel. After queuing the transfer operation, the blind transfer
Stasis message is published. At the time of publication, snapshots of
the channels and bridge involved are created. The ARI subscriber to the
blind transfer Stasis message then attempts to determine if the bridge
or any of the involved channels are subscribed to by ARI applications.
If so, then the blind transfer message is sent to the applications. The
way that the ARI blind transfer message handler works is to first see
if the transferer channel is subscribed to. If not, then iterate over
all the channel IDs in the bridge snapshot and determine if any of
those are subscribed to. In the test we were running, the lone
transferee channel was subscribed to, so an ARI event should have been
sent to our application. Occasionally, though, the bridge snapshot did
not have any channels IDs on it at all. Why?
The problem is that since the blind transfer operation is handled by a
separate thread, it is possible that the transfer will have completed and
the channels removed from the bridge before we publish the blind transfer
Stasis message. Since the blind transfer has completed, the bridge on
which the transfer occurred no longer has any channels on it, so the
resulting bridge snapshot has no channels on it. Through investigation of
the code, I found that attended transfers can have this issue too for the
case where a transferee is transferred to an application."
The fix employed here is to decouple the creation of snapshots for the transfer
messages from the publication of the transfer messages. This way, snapshots
can be created to reflect what they are at the time of the transfer operation.
Review: https://reviewboard.asterisk.org/r/4135
........
Merged revisions 427848 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 427870 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427873 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When using a non-default sorcery wizard (in this instance realtime) for
outbound registrations and after adding in an appropriate call to
ast_sorcery_apply_config() (since it is missing) Asterisk will crash after
a stack overflow occurs due to the code infinitely recursing. The fix entails
removing the outbound registration state dependency from the outbound
registration sorcery object and instead keeping an in memory container that
can be used to lookup the state when needed.
ASTERISK-24514
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/4164/
........
Merged revisions 427814 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 427815 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427823 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change corrects message ordering in cases where a channel-related
message can be received after a Stasis/ARI application has received the
StasisEnd message. The StasisEnd message was being passed to
applications directly without waiting for the channel topic to empty.
As a result of this fix, other bugs were also identified and fixed:
* StasisStart messages were also being sent directly to apps and are
now routed through the stasis message bus properly
* Masquerade monitor datastores were being removed at the incorrect
time in some cases and were causing StasisEnd messages to not be sent
* General refactoring where necessary for the above
* Unsubscription on StasisEnd timing changes to prevent additional
messages from following the StasisEnd when they shouldn't
A channel sanitization function pointer was added to reduce processing
and AO2 lookups.
Review: https://reviewboard.asterisk.org/r/4163/
ASTERISK-24501 #close
Reported by: Matt Jordan
........
Merged revisions 427788 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 427789 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427790 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When handling incoming messages we determine if it is associated with
a dialog. If so we use that to determine what serializer and endpoint
to use for the message. Previously this would pass the endpoint to the
endpoint lookup module to actually place the endpoint completely on the
message. For in-dialog responses, however, this did not occur as
dialog processing took over and the endpoint lookup did not occur.
This change just places the endpoint in the expected spot immediately
instead of relying on the endpoint lookup module. In-dialog responses
thus have the expected endpoint.
AST-1459 #close
Review: https://reviewboard.asterisk.org/r/4146/
........
Merged revisions 427490 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 427491 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427492 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Testing has shown repeatedly that PJSIP's default behavior of switching
automatically to TCP for large messages can cause issues. The most common
issues are that devices that we are communicating with do not handle the
switch to TCP gracefully, thus causing situations such as broken calls or
broken subscriptions. Now, in order to have this behavior happen, you must
opt into it. The sample file has been updated to warn that enabling the
TCP switch behavior may cause issues for you, so use at your own risk.
........
Merged revisions 427334 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427335 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Virtual line support establishes a relationship between messages
related to an outbound registration and a local endpoint. This is
accomplished by attaching a parameter to the Contact of the outbound
registration and looking for it on any received requests. If the
parameter exists and can be matched to an outbound registration
the configured endpoint is associated with the request.
Review: https://reviewboard.asterisk.org/r/2964/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427165 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a packet exceeds the MTU, pjproject will switch from UDP to TCP. In
some circumstances (on some networks), this can cause some issues with
messages not getting sent to the correct destination - and can also cause
connections to get dropped due to quirks in pjproject deciding to
terminate TCP connections with no messages.
While fixing the routing/messaging issues is important, having a
configuration option in Asterisk that tells pjproject to not switch over
to TCP would be useful. That way, if some glitch is discovered on some
other network/site, we can at least disable the behavior until a fix is
put into place.
AFS-197 #close
Review: https://reviewboard.asterisk.org/r/4137/
........
Merged revisions 427129 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 427130 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427137 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change adds an option, moh_passthrough, that when enabled will pass
hold and unhold requests through using a SIP re-invite. When placing on
hold a re-invite with sendonly will be sent and when taking off hold a
re-invite with sendrecv will be sent. This allows remote servers to handle
the musiconhold instead of the local Asterisk instance being responsible.
Review: https://reviewboard.asterisk.org/r/4103/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427112 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the res_stasis module is unloaded, it will dispose of the apps_registry
container. This is a problem if an ARI operation is in flight that attempts
to use the registry, as the shutdown occurs in a separate thread. This patch
adds some sanity checks to the various routines that access the registry which
cause the operations to fail if the apps_registry does not exist.
Crash caught by the Asterisk Test Suite.
........
Merged revisions 426995 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 426996 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426997 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Currently, it is possible for some subscriptions to get into a NULL state. When
this occurs and the PJSIPShowSubscriptionsInbound ami action is issued and a
device is subscribed for extension state then the associated subscription state
object can't be located. The code then attempts to dereference a NULL object.
Added a NULL check to avoid the problem.
Reported by: John Bigelow
........
Merged revisions 426779 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 426780 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426781 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In res_phoneprov, unloading the module first destroys the http_routes
container, followed by the users. However, users may have a route in
the http_routes container; the validity of this container is not checked
in the users destructor. Hence, we hit an assert as the container has already
been set to NULL.
This patch does two things:
(1) It adds a sanity check in the user destructor (because why not)
(2) It switches the order of destruction, so that users are disposed of prior
to the HTTP routes they may hold a reference to.
Note that this crash was caught by the Test Suite (go go testing!)
........
Merged revisions 426174 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 426176 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426179 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are two aspects to the vulnerability:
(1) res_jabber/res_xmpp use SSLv3 only. This patch updates the module to use
TLSv1+. At this time, it does not refactor res_jabber/res_xmpp to use the
TCP/TLS core, which should be done as an improvement at a latter date.
(2) The TCP/TLS core, when tlsclientmethod/sslclientmethod is left unspecified,
will default to the OpenSSL SSLv23_method. This method allows for all
ecnryption methods, including SSLv2/SSLv3. A MITM can exploit this by
forcing a fallback to SSLv3, which leaves the server vulnerable to POODLE.
This patch adds WARNINGS if a user uses SSLv2/SSLv3 in their configuration,
and explicitly disables SSLv2/SSLv3 if using SSLv23_method.
For TLS clients, Asterisk will default to TLSv1+ and WARN if SSLv2 or SSLv3 is
explicitly chosen. For TLS servers, Asterisk will no longer support SSLv2 or
SSLv3.
Much thanks to abelbeck for reporting the vulnerability and providing a patch
for the res_jabber/res_xmpp modules.
Review: https://reviewboard.asterisk.org/r/4096/
ASTERISK-24425 #close
Reported by: abelbeck
Tested by: abelbeck, opsmonitor, gtjoseph
patches:
asterisk-1.8-jabber-tls.patch uploaded by abelbeck (License 5903)
asterisk-11-jabber-xmpp-tls.patch uploaded by abelbeck (License 5903)
AST-2014-011-1.8.diff uploaded by mjordan (License 6283)
AST-2014-011-11.diff uploaded by mjordan (License 6283)
........
Merged revisions 425987 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 425991 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426003 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch for r425924 introduced a bug, wherein sending an INVITE request
with no SDP would cause Asterisk to not send an SDP Offer in the 200
OK. The current structure of res_pjsip_sdp_rtp is a bit hard to deal with
to fix this, as create_outgoing_sdp has no knowledge of whether or not it is
creating an SDP as a new Offer or an Answer. This is something of an oversight
in the callback definition, as the caller of it does have this information.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425945 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The usage of the local override_prefs variable in create_outgoing_sdp_stream
was previously to track an override format preference set by PJSIP_MEDIA_OFFER.
Now, however, that function simply sets the joint capabilities structure,
session->req_caps. During the media format rework, the override_prefs was
instead used to check if there were any formats in session->req_caps.
However, this usage isn't useful in create_outgoing_sdp_stream.
session->req_caps contains the negotiated formats for *all* streams, not just
the current one being created. Thus, so long as any stream of any type has
provided a format, override_prefs will be non-zero. Hence, its usage in
checking whether or not we should look at the formats on the endpoint or
the joint capabilities is generally useless.
There's only two things useful to check:
(1) Does the endpoint have a format for the media type?
(2) Did we negotiate a format for the media type?
If either of those is a 'no', then we must kill the media stream.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425924 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When an inbound SDP offer is received, Asterisk currently makes a few
incorrection assumptions:
(1) If the offer contains more than a single audio/video stream, Asterisk will
reject the entire stream with a 488. This is an overly strict response;
generally, Asterisk should accept the media streams that it can accept and
decline the others.
(2) If the offer contains a declined media stream, Asterisk will attempt to
process it anyway. This can result in attempting to match format
capabilities on a declined media stream, leading to a 488. Asterisk should
simply ignore declined media streams.
(3) Asterisk will currently attempt to handle offers with AVPF with
use_avpf=No/AVP with use_avpf=Yes. This mismatch results in invalid SDP
answers being sent in response. If there is a mismatch between the media
type being offered and the configuration, Asterisk must reject the offer
with a 488.
This patch does the following:
* Asterisk will accept SDP offers with at least one media stream that it can
use. Some WARNING messages have been dropped to NOTICEs as a result.
* Asterisk will not accept an offer with a media type that doesn't match its
configuration.
* Asterisk will ignore declined media streams properly.
#SIPit31
Review: https://reviewboard.asterisk.org/r/4063/
ASTERISK-24122 #close
Reported by: James Van Vleet
ASTERISK-24381 #close
Reported by: Matt Jordan
........
Merged revisions 425868 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 425879 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425881 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change adds a module which is configurable using the keep_alive_interval setting in the
global section that will send a CRLF keep alive to all active connection-oriented transports at
the provided interval. This is useful because it can help keep connections open through NATs.
This functionality also exists within PJSIP but can not be controlled at runtime and requires
recompiling it.
Review: https://reviewboard.asterisk.org/r/4084/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425825 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch provides the capability to manipulate templates and categories
with non-unique names via AMI.
Summary of changes:
GetConfig and GetConfigJSON: Added "Filter" parameter: A comma separated list
of name_regex=value_regex expressions which will cause only categories whose
variables match all expressions to be considered. The special variable name
TEMPLATES can be used to control whether templates are included. Passing
'include' as the value will include templates along with normal categories.
Passing 'restrict' as the value will restrict the operation to ONLY templates.
Not specifying a TEMPLATES expression results in the current default behavior
which is to not include templates.
UpdateConfig: NewCat now includes options for allowing duplicate category
names, indicating if the category should be created as a template, and
specifying templates the category should inherit from. The rest of the
actions now accept a filter string as defined above. If there are non-unique
category names, you can now update specific ones based on variable values.
To facilitate the new capabilities in manager, corresponding changes had to be
made to config, most notably the addition of filter criteria to many of the
APIs. In some cases it was easy to change the references to use the new
prototype but others would have required touching too many files for this
patch so a wrapper with the original prototype was created. Macros couldn't
be used in this case because it would break binary compatibility with modules
such as res_digium_phone that are linked to real symbols.
Tested-by: George Joseph
Review: https://reviewboard.asterisk.org/r/4033/
........
Merged revisions 425383 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 425384 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425385 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If res_phoneprov failed to fully load (due to not being configured), the
providers container will be NULL. If a module attempts to register a phone
provisioning provider, it should check for the presence of the container.
If there is no providers container, it should return an error.
This patch makes the ast_phoneprov_provider_register function do that...
otherwise this would be a silly commit message.
........
Merged revisions 425220 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 425221 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425222 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When starting ice if there is not at least one remote ice candidate with an RTP
component asterisk will crash. This is due to an assertion in pjnath as it
expects at least one candidate with an RTP component. Added a check to make
sure at least one candidate contains an RTP component and at least one candidate
has an RTCP component.
ASTERISK-24383 #close
Review: https://reviewboard.asterisk.org/r/4039/
........
Merged revisions 425031 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425032 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch makes res_phoneprov more modular so other modules (like pjsip)
can provide configuration information instead of res_phoneprov relying solely
on users.conf and sip.conf. To accomplish this a new ast_phoneprov public API
is now exposed which allows config providers to register themselves, set
defaults (server profile, etc) and add user extensions.
* ast_phoneprov_provider_register registers the provider and provides callbacks
for loading default settings and loading users.
* ast_phoneprov_provider_unregister clears the defaults and users.
* ast_phoneprov_add_extension should be called once for each user/extension
by the provider's load_users callback to add them.
* ast_phoneprov_delete_extension deletes one extension.
* ast_phoneprov_delete_extensions deletes all extensions for the provider.
Tested-by: George Joseph
Review: https://reviewboard.asterisk.org/r/3970/
........
Merged revisions 424963 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 424964 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424965 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, the auth_reject_permanent parameter was not initialized on
the registration client state, leading to the parameter being disabled
regardless of the value specified in pjsip.conf.
This patch initialized the setting on the registration client state to the
provided configuration value.
ASTERISK-24398 #close
........
Merged revisions 424730 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 424731 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424732 65c4cc65-6c06-0410-ace0-fbb531ad65f3
An OPTIONS request that is sent to Asterisk but not to a specific endpoint is
currently sent a 404 in response. This is because, not surprisingly, an empty
extension is never going to be found in the dialplan.
This patch makes it so that we only attempt to look up the endpoint in the
dialplan if it is specified in the OPTIONS request URI.
#SIPit31
ASTERISK-24370 #close
Reported by: Matt Jordan
........
Merged revisions 424624 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 424625 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424626 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a message that exceeds the PJ_MAX_PKT_SIZE is sent over a reliable
transport, it is possible (although it shouldn't occur) for pjproject to pass
up an rdata object with a NULL msg in the msg_info. Needless to say, things
that attempt to dereference this are in for a rough ride.
In particular, this caused crashes in three different locations, all of which
are 'low level' enough to intercept an rdata object early in processing:
(1) res_pjsip_logger
(2) res_hep_pjsip
(3) res_pjsip/distributor
Anything that can intercept an rdata object before res_pjsip/distributor should
be defensive when looking at the received packet.
#SIPit31
ASTERISK-24369 #close
Reported by: Matt Jordan
........
Merged revisions 424618 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 424619 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424620 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A subscription that has been persisted can - for various reasons - fail to be
re-created on startup. This patch resolves a number of crashes that occurred
when a subscription cannot be re-created on several off-nominal paths.
#SIPit31
ASTERISK-24368 #close
Reported by: Matt Jordan
........
Merged revisions 424601 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424602 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Performing a directed call pickup resulted in a deadlock when PJSIP
channels were involved.
A masquerade needs to hold onto the channel locks while it swaps channel
information between the two channels involved in the masquerade. With
PJSIP channels, the fixup routine needed to push a fixup task onto the
PJSIP channel's serializer. Unfortunately, if the serializer was also
processing a task that needed to lock the channel, you get deadlock.
* Added a new control frame that is used to notify the channels that a
masquerade is about to start and when it has completed.
* Added the ability to query taskprocessors if the current thread is the
taskprocessor thread.
* Added the ability to suspend/unsuspend the PJSIP serializer thread so a
masquerade could fixup the PJSIP channel without using the serializer.
ASTERISK-24356 #close
Reported by: rmudgett
Review: https://reviewboard.asterisk.org/r/4034/
........
Merged revisions 424471 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 424472 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424473 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Improvements to the res_pjsip transport cipher option.
* Made the cipher option accept a comma separated list of OpenSSL cipher
names. Users of realtime will be glad if they have more than one name to
list.
* Added the CLI command 'pjsip list ciphers' so a user can know what
OpenSSL names are available for the cipher option.
* Updated the cipher option online XML documentation to specify what is
expected for the value.
* Updated pjsip.conf.sample to not indicate that ALL is acceptable since
ALL does not imply a preference order for the ciphers and PJSIP does not
simply pass the string to OpenSSL for interpretation.
ASTERISK-24199 #close
Reported by: Joshua Colp
Review: https://reviewboard.asterisk.org/r/4018/
........
Merged revisions 424393 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 424394 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424395 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During the latest update to DTLS-SRTP support the ability to configure
the hash used for fingerprints was added. This gave us two supported ones:
SHA-1 and SHA-256. The default was accordingly updated to SHA-256.
Unfortunately this configuration ability was not exposed within res_pjsip.
This change adds a dtls_fingerprint option that controls it.
#SIPit31
........
Merged revisions 424290 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 424291 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424292 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Due to the architecture of how media streams are handled each individual
handler adds connection details (IP address) for it. The first media stream
is then used as the top level SDP connection line. In practice each
line ends up being the same so to reduce the SDP size stream-level connection
information is also added to the SDP if it differs from the top level SDP
connection line.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424077 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This gets rid of most old libc free/malloc/realloc and replaces them
with ast_free and friends. When compiling with MALLOC_DEBUG you'll
notice it when you're mistakenly using one of the libc variants. For
the legacy cases you can define WRAP_LIBC_MALLOC before including
asterisk.h.
Even better would be if the errors were also enabled when compiling
without MALLOC_DEBUG, but that's a slightly more invasive header
file change.
Those compiling addons/format_mp3 will need to rerun
./contrib/scripts/get_mp3_source.sh.
ASTERISK-24348 #related
Review: https://reviewboard.asterisk.org/r/4015/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423978 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The new option 'preferchannelclass' is added to musiconhold.conf. If yes
(the default) the CHANNEL(musicclass) is preferred when choosing the
hold music. If it is no, the class suggested by the application that
calls the MoH (e.g. the Queue() app) gets preferred (new behaviour).
This way you set a different hold-music from the Queue-music by setting
both the CHANNEL(musicclass) and the queue-context musicclass.
ASTERISK-24276 #close
Reported by: Kristian Høgh
Patches:
app_override_channel_moh.patch uploaded by Kristian Høgh (License #6639)
Review: https://reviewboard.asterisk.org/r/4010/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423893 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The crash on the issues is a result of an invalid transport configuration
change when asterisk is restarted. The attempt to send the qualify
request fails and we cleaned up. However, the callback is also called
which results in a double unref of the objects involved.
* Put a wrapper around pjsip_endpt_send_request() to detect when the
passed in callback is called because of an error so callers can know to
not cleanup.
* Made send_request_cb() able to handle repeated challenges (Up to 10).
* Fix periodic endpoint qualify OPTIONS sched deletion race by avoiding
it. The sched entry will no longer self stop and must be externally
stopped.
* Added REF_DEBUG description tags to struct sched_data in
pjsip_options.c.
* Fix some off-nominal ref leaks in schedule_qualify(),
qualify_and_schedule().
* Reordered pjsip_options.c module start/stop code to cleanup better on
error.
ASTERISK-24295 #close
Reported by: Rogger Padilla
Review: https://reviewboard.asterisk.org/r/3954/
........
Merged revisions 423866 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 423867 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423868 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When unloading the module did not unregister the CLI commands causing a crash upon
load when they were registered again.
When reloading the module the return value from the config options framework was not
checked to determine if an error occurred or not. This caused a message to be output
saying the module did not exist when reloading if no changes were present.
AST-1433 #close
AST-1434 #close
........
Merged revisions 423579 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 423580 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423581 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Outgoing PJSIP calls can result in non-negotiated formats listed in the
channel's native formats if video formats are listed in the endpoint's
configuration. The resulting call could then use a non-negotiated format
resulting in one way audio.
* Simplified the update of session->req_caps in set_caps(). Why do
something in five steps when only one is needed?
AFS-162 #close
Review: https://reviewboard.asterisk.org/r/4000/
........
Merged revisions 423561 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423563 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change gives framehooks a reverse-direction masquerade callback in
addition to chan_fixup_cb similar to the callback added to datastores
to handle the same situation. The new callback provides the same
parameters as the fixup callback, but is called on the new channel's
framehooks before moving framehooks from the old channel to the new
channel. This gives the framehooks an oppurtunity to decide whether
they should remain on the new channel or be removed.
This new callback is used to prevent the PJSIP T.38 framehook from
remaining on a masqueraded channel if the new channel is not also a
PJSIP channel. This was causing a crash when a local channel was
masqueraded into a PJSIP channel and the framehook was executed on the
local channel since the channel's tech private data was not structured
as expected.
Review: https://reviewboard.asterisk.org/r/4001/
........
Merged revisions 423503 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 423504 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423505 65c4cc65-6c06-0410-ace0-fbb531ad65f3
res_pjsip_pubsub has two separate checks that it makes when a SUBSCRIBE
arrives.
* It checks that there is a subscription handler for the Event
* It checks that there are body generators for the types in the Accept header
The problem is, there's nothing that ensures that these two things will
actually mesh with each other. For instance, Asterisk will accept a subscription
to MWI that accepts pidf+xml bodies. That doesn't make sense.
With this commit, we add some type information to the mix. Subscription
handlers state they generate data of type X, and body generators state
that they consume data of type X. This way, Asterisk doesn't end up in
some hilariously mismatched situation like the one in the previous paragraph.
ASTERISK-24136 #close
Reported by Mark Michelson
Review: https://reviewboard.asterisk.org/r/3877
Review: https://reviewboard.asterisk.org/r/3878
........
Merged revisions 423344 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 423348 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423350 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1. The number of file descriptors an ioqueue instance can handle is fixed, so we
now spawn the required number to handle the load.
2. Our transport identifiers were exceeding the range supported by pjnath.
3. The TURN client did not set up client binding causing needless bandwidth usage.
4. The code no longer updates address information on each packet.
5. STUN traffic was getting looped back to Asterisk instead of going through the
TURN server.
6. Synchronization now ensures things are completely setup or destroyed.
7. Logging now reflects the target the TURN server is sending to/receiving from
on our behalf.
ASTERISK-23577 #close
Reported by: Jay Jideliov
ASTERISK-23634 #close
Reported by: Roman Skvirsky
Review: https://reviewboard.asterisk.org/r/3982/
........
Merged revisions 423150 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 423151 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 423152 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423153 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- adds sort=randstart (next to sort=, sort=random, sort=alpha)
- combines duplicate moh option parsing code into a single function
- adds deprecationwarnings for application=r to sort randomly
- adds deprecationwarnings for random=yes to sort randomly
- removes invisible code that was supposed to stay until 1.8
The sort=randstart works like sort=alpha, except we start at a random
position.
Review: https://reviewboard.asterisk.org/r/3991/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423065 65c4cc65-6c06-0410-ace0-fbb531ad65f3
PJSIP, unless a constant is modified at compilation time, limits
SIP requests to 4000 bytes. Full-state RLS notifications can easily
exceed this limit with moderately small lists.
This changeset allows for Asterisk to work around this size limit by
performing its own allocation of the transmission data buffer. This
way, Asterisk can allocate a buffer that exceeds the built-in maximum.
We still impose our own limit of 64000 bytes, mainly because making
allocations larger than that is a bit absurd.
ASTERISK-24181 #close
Reported by Mark Michelson
Review: https://reviewboard.asterisk.org/r/3977
........
Merged revisions 422851 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422852 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Testsuite tests will occasionally fail because on reception of a 200 OK SIP response,
an AST_CONTROL_ANSWER frame is queued prior to when media has finished being
negotiated. This is because session supplements are called into before PJSIP's
inv_session code has told us that media has been updated. Sometimes the queued answer
frame is handled by the PBX thread before the ensuing media negotiations occur, causing
a test failure.
As it turns out, there is another place that session supplements could be called into, which is
after media has finished getting negotiated. What this commit introduces is a means for session
supplements to indicate when they wish to be called into when handling an incoming SIP response.
By default, all session supplements will be run at the same point that they were prior to this
commit. However, session supplements may indicate that they wish to be handled earlier than
normal on redirects, or they may indicate they wish to be handled after media has been negotiated.
In this changeset, two session supplements have been updated to indicate a preference for when
they should be run: res_pjsip_diversion executes before handling redirection in order to get
information from the Diversion header, and chan_pjsip now handles responses to INVITEs after
media negotiation to fix the race condition mentioned previously.
ASTERISK-24212 #close
Reported by Matt Jordan
Review: https://reviewboard.asterisk.org/r/3930
........
Merged revisions 422536 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 422542 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422543 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When ARI manipulates a bridge, it generally doesn't care what the mixing
technology is. Operations on a bridge initiated through ARI should perform
their action in generally the same way, regardless of the bridge's mixing
technology. While the mixing technology may determine how media flows to
channels, the actual operations on a bridge themselves should be the same.
Currently, this isn't the case with holding bridges. When a channel joins
without a role, MoH is started on that channel automatically. Subsequent bridge
operations that would stop MoH would fail (as there is no Announcer channel
playing MoH to the bridge). Starting MoH on the bridge will also create two
MoH streams: one from the MoH being played on the participant channel, and one
from the announcer channel. From the perspective of ARI users, this is
counter-intuitive - I would not expect MoH to be started for me. The mixing
technology determines how media is shared between participants, not the
application experience.
This patch does the following:
* The Stasis bridge class now inspects channels as they are going into a
bridge. If the bridge has a holding capability, and the channel has no
roles, we give it a participant role and mark the default behaviour to have
no entertainment. This allows addChannel operations to continue to set a
participant role with an entertainment option if it felt like it (or could
do it).
* The music on hold channel is now Stasis approved (tm)
Review: https://reviewboard.asterisk.org/r/3929/
ASTERISK-24264 #close
Reported by: Samuel Galarneau
Tested by: Samuel Galarneau
........
Merged revisions 422503 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 422504 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422505 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A misunderstanding of how the scheduler worked caused further batched notifications
beyond the first not to get scheduled. Now we reset our scheduler ID to -1 after
the batched notification is sent. This way, further notifications can be scheduled
when they arise.
........
Merged revisions 422239 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422240 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In order to alter the Contact header on in-dialog requests and responses the
Websocket module must be attached on outgoing INVITEs. The Contact header is
modified so that the PJSIP transport layer can find and use the existing
Websocket connection based on the source IP address, port, and transport.
ASTERISK-24143 #close
Reported by: Aleksei Kulakov
........
Merged revisions 421955 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 421956 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421957 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The packet structure used to receive messages was using the transport
pool. This meant that for each parsing the pool would grow accordingly.
Since memory can not be reclaimed without resetting it this would
cause the memory pool to grow and grow.
This change uses a specific memory pool for the packet structure and
resets it to a fresh state after the message has been received and
handled.
........
Merged revisions 421939 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 421945 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421950 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this change, the Remote-Party-ID header took the position of
"If caller name and number are not explicitly allowed, then they are private"
and P-Asserted-Identity took the position of
"Caller name and number are only private if marked explicitly so"
Now both mechanisms of conveying party identification use the former approach.
........
Merged revisions 421778 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 421783 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421785 65c4cc65-6c06-0410-ace0-fbb531ad65f3
On a SIP reinvite that changes media strams, the PJSIP channel driver was
flooding the log with "Asked to transmit frame type %s, while native
formats is %s" warnings.
* Fixes PJSIP not setting up translation paths when the formats change on
a reinvite. AFS-63 was effectively reintroduced because of the media
formats work. res_pjsip_sdp_rtp.c:set_caps()
* Improved the unexpected frame format WARNING message to include more
information.
* Added protective locking while altering formats on a channel. Reworked
set_format() to simplify and protect the formats under manipulation.
* Restored some code that got lost in the media_formats work.
(channel.c:set_format() and res_pjsip_sdp_rtp.c:set_caps())
AFS-137 #close
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/3906/
........
Merged revisions 421645 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421646 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a blind transfer occurs that is forced to create a local channel
pair to satisfy the transfer request, information about the local
channel pair is not published. This adds a field to describe that
channel to the blind transfer message struct so that this information
is conveyed properly to consumers of the blind transfer message.
This also fixes a bug in which Stasis() was unable to properly identify
the channel that was replacing an existing Stasis-controlled channel
due to a blind transfer.
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3921/
........
Merged revisions 421537 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 421538 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421539 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If /channels/{channelID}/continue is called on a channel that was originated
without a PBX (such as the ARI command POST channel with a stasis application
argument), the channel will not start dialplan execution. This patch will now
run the PBX out of the stasis execution if the channel doesn't currently have
an active PBX upon continuing.
ASTERISK-24043 #close
Reported by: Krandon Bruse
Review: https://reviewboard.asterisk.org/r/3917/
Patches:
stasis-continue.diff submitted by Krandon Bruse (license 6631)
........
Merged revisions 421416 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 421423 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421424 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A calls B
B answers
B SIP attended transfers to C
C answers, B and C can see each other's connected line information
B completes the transfer
A has number but no name connected line information about C
while C has the full information about A
I examined the incoming and outgoing party id information handling of
chan_pjsip and found several issues:
* Fixed ast_sip_session_create_outgoing() not setting up the configured
endpoint id as the new channel's caller id. This is why party A got
default connected line information.
* Made update_initial_connected_line() use the channel's CALLERID(id)
information. The core, app_dial, or predial routine may have filled in or
changed the endpoint caller id information.
* Fixed chan_pjsip_new() not setting the full party id information
available on the caller id and ANI party id. This includes the configured
callerid_tag string and other party id fields.
* Fixed accessing channel party id information without the channel lock
held.
* Fixed using the effective connected line id without doing a deep copy
outside of holding the channel lock. Shallow copy string pointers can
become stale if the channel lock is not held.
* Made queue_connected_line_update() also update the channel's
CALLERID(id) information. Moving the channel to another bridge would need
the information there for the new bridge peer.
* Fixed off nominal memory leak in update_incoming_connected_line().
* Added pjsip.conf callerid_tag string to party id information from
enabled trust_inbound endpoint in caller_id_incoming_request().
AFS-98 #close
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/3913/
........
Merged revisions 421400 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 421403 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421404 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r421311 | mjordan | 2014-08-17 20:11:28 -0500 (Sun, 17 Aug 2014) | 9 lines
res/ari/resource_channels: Don't return allocation failure on failed function
If a function fails to execute, it is most likely due to one of two reasons:
(1) The function doesn't exist or can't be read from
(2) The function is dangerous and is restricted based on the user's permissions
Currently we return allocation failure, which is incorrect. This updates the
reason code to more accurately reflect why the request failed.
ASTERISK-24215
........
r421312 | mjordan | 2014-08-17 20:13:41 -0500 (Sun, 17 Aug 2014) | 4 lines
res/ari/resource_channels: Fix compilation issue
Forgot a parameter. Whoops.
........
Merged revisions 421311-421312 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421313 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch addresses a few issues:
1) The order of Dial events have been changed when performing a call forward.
The order has now been altered to
1) Dial begins dialing channel A.
2) When A forwards the call to B, we issue the dial end event to channel
A, indicating the dial is being canceled due to a forward to B.
3) When the call to channel B occurs, we then issue a new dial begin to
channel B.
2) Call forwards are now reported on the calling channel, not the peer channel.
3) AMI DialEnd events have been altered to display the extension the call is
being forwarded to when relevant.
4) You can now get the values of channel variables for channels that are not
currently in the Stasis application. This brings the retrieval of channel
variables more in line with the rest of channel read operations since they
may be performed on channels not in Stasis.
ASTERISK-24134 #close
Reported by Matt Jordan
ASTERISK-24138 #close
Reported by Matt Jordan
Patches:
forward-shenanigans.diff uploaded by Matt Jordan (License #6283)
Review: https://reviewboard.asterisk.org/r/3899
........
Merged revisions 420794 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421310 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The res_hep_rtcp module was incorrectly including <pjsip.h>. This didn't need
to be included, as the module does not using PJPROJECT any fashion.
Unfortunately, because res_hep_rtcp did not include pjsip in its MODULEINFO as
a dependency, this also meant that res_hep_rtcp will fail to compile on a
system without PJPROJECT.
This patch removes the include.
Thanks to Damien Wedhorn for pointing this out in #asterisk-dev.
ASTERISK-24236 #close
Reported by: Damien Wedhorn, Matt Jordan
Tested by: Damien Wedhorn
........
Merged revisions 421064 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 421065 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421066 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The unit tests require a sorcery.conf file that has been
set up to store resource lists in memory rather than retrieving
from configuration.
With a setup that is not conducive to running the tests, a fault
in sorcery currently causes Asterisk to crash when attempting to
run any of the tests.
To get around the crash, this adds a function that verifies the
current environment and marks the tests as "not run" if the setup
is not correct.
........
Merged revisions 420779 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420780 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Running testsuite tests locally produced no errors, but when
run using the continuous integration framework, crashes occurred.
The crashes occurred due to a refcounting error that had been fixed
for a similar situation.
........
Merged revisions 420758 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420759 65c4cc65-6c06-0410-ace0-fbb531ad65f3
These modules were originally specified as being disabled, as they were
introduced midstream in Asterisk 12. That makes it nicer for folks who are
upgrading to a new release in the middle of Asterisk 12. That's not the case
for Asterisk 13: it's a brand new release. There's no reason to have the
modules disabled by default in that case.
........
Merged revisions 420742 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420743 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit adds the ability for a user to configure
a resource list in pjsip.conf. Subscribing to this
list simultaneously subscribes the subscriber to all
resources listed. This has the potential to reduce
the amount of SIP traffic when loads of subscribers
on a system attempt to subscribe to each others' states.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420384 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This module uses the inbound and outbound PUBLISH support to exchange device and mailbox
state between Asterisk instances. Each instance is configured to publish to the other and
requires no intermediary server. The functionality provided is similar to the XMPP and
Corosync support.
Review: https://reviewboard.asterisk.org/r/3780/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420315 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This introduces stasis.conf and a mechanism to prevent certain message
types from being published. Internally, this works by preventing the
chosen message types from being created which ensures that those
message types can never be published. This patch also adjusts message
publishers such that message payloads are not created if the related
message type is not available.
ASTERISK-23943 #close
Review: https://reviewboard.asterisk.org/r/3823/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420124 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r420089 | mjordan | 2014-08-05 15:10:52 -0500 (Tue, 05 Aug 2014) | 72 lines
ARI: Add channel technology agnostic out of call text messaging
This patch adds the ability to send and receive text messages from various
technology stacks in Asterisk through ARI. This includes chan_sip (sip),
res_pjsip_messaging (pjsip), and res_xmpp (xmpp). Messages are sent using the
endpoints resource, and can be sent directly through that resource, or to a
particular endpoint.
For example, the following would send the message "Hello there" to PJSIP
endpoint alice with a display URI of sip:asterisk@mycooldomain.org:
ari/endpoints/sendMessage?to=pjsip:alice&from=sip:asterisk@mycooldomain.org&body=Hello+There
This is equivalent to the following as well:
ari/endpoints/PJSIP/alice/sendMessage?from=sip:asterisk@mycooldomain.org&body=Hello+There
Both forms are available for message technologies that allow for arbitrary
destinations, such as chan_sip.
Inbound messages can now be received over ARI as well. An ARI application that
subscribes to endpoints will receive messages from those endpoints:
{
"type": "TextMessageReceived",
"timestamp": "2014-07-12T22:53:13.494-0500",
"endpoint": {
"technology": "PJSIP",
"resource": "alice",
"state": "online",
"channel_ids": []
},
"message": {
"from": "\"alice\" <sip:alice@127.0.0.1>",
"to": "pjsip:asterisk@127.0.0.1",
"body": "Watson, come here.",
"variables": []
},
"application": "testsuite"
}
The above was made possible due to some rather major changes in the message
core. This includes (but is not limited to):
- Users of the message API can now register message handlers. A handler has
two callbacks: one to determine if the handler has a destination for the
message, and another to handle it.
- All dialplan functionality of handling a message was moved into a message
handler provided by the message API.
- Messages can now have the technology/endpoint associated with them.
Various other properties are also now more easily accessible.
- A number of ao2 containers that weren't really needed were replaced with
vectors. Iteration over ao2_containers is expensive and pointless when
the lifetime of things is well defined and the number of things is very
small.
res_stasis now has a new file that makes up its structure, messaging. The
messaging functionality implements a message handler, and passes received
messages that match an interested endpoint over to the app for processing.
Note that inadvertently while testing this, I reproduced ASTERISK-23969.
res_pjsip_messaging was incorrectly parsing out the 'to' field, such that
arbitrary SIP URIs mangled the endpoint lookup. This patch includes the
fix for that as well.
Review: https://reviewboard.asterisk.org/r/3726
ASTERISK-23692 #close
Reported by: Matt Jordan
ASTERISK-23969 #close
Reported by: Andrew Nagy
........
r420090 | mjordan | 2014-08-05 15:16:37 -0500 (Tue, 05 Aug 2014) | 2 lines
Remove automerge properties :-(
........
r420097 | mjordan | 2014-08-05 16:36:25 -0500 (Tue, 05 Aug 2014) | 2 lines
test_message: Fix strict-aliasing compilation issue
........
Merged revisions 420089-420090,420097 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420098 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds a large swath of response documentation for PJSIPShowEndpoint
and PJSIPShowEndpoints AMI commands. It relies heavily on the existing
text in the configInfo documentation via xi:include tags to avoid
documentation duplication.
Review: https://reviewboard.asterisk.org/r/3888/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419914 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Now when running PJSIPShowEndpoint, you will receive a
ContactStatusDetail for each bound contact that Asterisk
is qualifying. This information includes the URI of the
contact, current reachability, and roundtrip time.
AFS-91 #close
Reported by Mark Michelson
Review: https://reviewboard.asterisk.org/r/3797
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419888 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds a new module to Asterisk, res_hep_rtcp. The module subscribes
to the RTCP topics in Stasis and receives RTCP information back from the
message bus. It encodes into HEPv3 packets and sends the information to the
res_hep module for transmission.
Using this, someone with a Homer server can get live call quality monitoring
for all RTP-based channels in their Asterisk 12+ systems.
In addition, there were a few bugs in the RTP engine, res_rtp_asterisk, and
chan_pjsip that were uncovered by the tests written for the Asterisk Test
Suite. This patch fixes the following:
1) chan_pjsip failed to set its channel unique ids on its RTP instance on
outbound calls. It now does this in the appropriate location, in the
serialized call callback.
2) The rtp_engine was overflowing some values when packed into JSON.
Specifically, some longs and unsigned ints can't be be packed into integer
values, for obvious reasons. Since libjansson only supports integers,
floats, strings, booleans, and objects, we print these values into strings.
3) res_rtp_asterisk had a few problems:
(a) it would emit a source IP address of 0.0.0.0 if bound to that IP
address. We now use ast_find_ourip to get a better IP address, and
properly marshal the result into an ast_strdupa'd string.
(b) Reports can be generated with no report bodies. In particular, this
occurs when a sender is transmitting information to a receiver (who
will send no RTP back to the sender). As such, the sender has no report
body for what it received. We now properly handle this case, and the
sender will emit SR reports with no body. Likewise, if we receive an
RTCP packet with no report body, we will still generate the appropriate
events.
ASTERISK-24119 #close
........
Merged revisions 419823 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419825 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds three new AMI commands:
* ExtensionStateList (pbx.c) - list all known extension state hints
and their current statuses. Events emitted by the list action are
equivalent to the ExtensionStatus events.
* PresenceStateList (res_manager_presencestate) - list all known
presence state values. Events emitted are generated by the stasis
message type, and hence are PresenceStateChange events.
* DeviceStateList (res_manager_devicestate) - list all known device
state values. Events emitted are generated by the stasis message
type, and hence are DeviceStateChange events.
Patch-by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3799/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419806 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Since the PJSIP INVITE session module is invoked before any session supplements it was
possible for it to handle a redirect before the res_pjsip_diversion module interpreted
and set redirecting information on the channel. This would cause the redirecting
information to get lost.
This patch ensures that session supplements are *always* invoked before a redirect occurs
by explicitly calling them in the redirect handler.
Review: https://reviewboard.asterisk.org/r/3850/
........
Merged revisions 419764 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419766 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r419565 | mjordan | 2014-07-25 09:41:23 -0500 (Fri, 25 Jul 2014) | 21 lines
ARI: report duration values in LiveRecording objects
This patch adds three new fields to the LiveRecording model:
- total_duration: the total length of the live recording
- talking_duration: optional. The duration of talking energy that was
detected while the recording was made.
- silence_duration: optional. The duration of silence that was detected while
the recording was made.
These values are reported in the RecordingFinished ARI event.
When a DSP is enabled on the channel during the recording - which occurs when
the recording is created with max_silence_seconds (indicating that the user
actually cares about how much silence is in the file), we will report the
talking_duration and silence_duration in addition to the total_duration.
Review: https://reviewboard.asterisk.org/r/3770/
ASTERISK-24037 #close
Reported by: Samuel Galarneau
........
r419566 | mjordan | 2014-07-25 09:46:15 -0500 (Fri, 25 Jul 2014) | 1 line
Update CHANGES for r419565
........
Merged revisions 419565-419566 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419567 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When Asterisk starts a module (calling its load_module function), it re-orders
the module list, sorting it alphabetically. Ostensibly, this was done so that
the output of 'module show' listed modules in alphabetic order. This had the
unfortunate side effect of making modules with complex usage patterns
unloadable. A module that has a large number of modules that depend on it is
typically abandoned during the unloading process. This results in its memory
not being reclaimed during exit.
Generally, this isn't harmful - when the process is destroyed, the operating
system will reclaim all memory allocated by the process. Prior to Asterisk 12,
we also didn't have many modules with complex dependencies. However, with
the advent of ARI and PJSIP, this can make make unloading those modules
successfully nearly impossible, and thus tracking memory leaks or ref debug
leaks a real pain.
While this patch is not a complete overhaul of the module loader - such an
effort would be beyond the scope of what could be done for Asterisk 13 -
this does make some marginal improvements to the loader such that modules
like res_pjsip or res_stasis *may* be made properly un-loadable in the future.
1. The linked list of modules has been replaced with a doubly linked list. This
allows traversal of the module list to occur backwards. The module shutdown
routine now walks the global list backwards when it attempts to unload
modules.
2. The alphabetic reorganization of the module list on startup has been
removed. Instead, a started module is placed at the end of the module list.
3. The ast_update_module_list function - which is used by the CLI to display
the modules - now does the sorting alphabetically itself. It creates its own
linked list and inserts the modules into it in alphabetic order. This allows
for the intent of the previous code to be maintained.
This patch also contains a fix for res_calendar. Without calendar.conf, the
calendar modules were improperly bumping the use count of res_calendar, then
failing to load themselves. This patch makes it so that we detect whether or
not calendaring is enabled before altering the use count.
Review: https://reviewboard.asterisk.org/r/3777/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419563 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The previous behavior was to simply set the accountcode of an outgoing
channel to the accountcode of the channel initiating the call. It was
done this way a long time ago to allow the accountcode set on the SIP/100
channel to be propagated to a local channel so the dialplan execution on
the Local;2 channel would have the SIP/100 accountcode available.
SIP/100 -> Local;1/Local;2 -> SIP/200
Propagating the SIP/100 accountcode to the local channels is very useful.
Without any dialplan manipulation, all channels in this call would have
the same accountcode.
Using dialplan, you can set a different accountcode on the SIP/200 channel
either by setting the accountcode on the Local;2 channel or by the Dial
application's b(pre-dial), M(macro) or U(gosub) options, or by the
FollowMe application's b(pre-dial) option, or by the Queue application's
macro or gosub options. Before Asterisk v12, the altered accountcode on
SIP/200 will remain until the local channels optimize out and the
accountcode would change to the SIP/100 accountcode.
Asterisk v1.8 attempted to add peeraccount support but ultimately had to
punt on the support. The peeraccount support was rendered useless because
of how the CDR code needed to unconditionally force the caller's
accountcode onto the peer channel's accountcode. The CEL events were thus
intentionally made to always use the channel's accountcode as the
peeraccount value.
With the arrival of Asterisk v12, the situation has improved somewhat so
peeraccount support can be made to work. Using the indicated example, the
the accountcode values become as follows when the peeraccount is set on
SIP/100 before calling SIP/200:
SIP/100 ---> Local;1 ---- Local;2 ---> SIP/200
acct: 100 \/ acct: 200 \/ acct: 100 \/ acct: 200
peer: 200 /\ peer: 100 /\ peer: 200 /\ peer: 100
If a channel already has an accountcode it can only change by the
following explicit user actions:
1) A channel originate method that can specify an accountcode to use.
2) The calling channel propagating its non-empty peeraccount or its
non-empty accountcode if the peeraccount was empty to the outgoing
channel's accountcode before initiating the dial. e.g., Dial and
FollowMe. The exception to this propagation method is Queue. Queue will
only propagate peeraccounts this way only if the outgoing channel does not
have an accountcode.
3) Dialplan using CHANNEL(accountcode).
4) Dialplan using CHANNEL(peeraccount) on the other end of a local
channel pair.
If a channel does not have an accountcode it can get one from the
following places:
1) The channel driver's configuration at channel creation.
2) Explicit user action as already indicated.
3) Entering a basic or stasis-mixing bridge from a peer channel's
peeraccount value.
You can specify the accountcode for an outgoing channel by setting the
CHANNEL(peeraccount) before using the Dial, FollowMe, and Queue
applications. Queue adds the wrinkle that it will not overwrite an
existing accountcode on the outgoing channel with the calling channels
values.
Accountcode and peeraccount values propagate to an outgoing channel before
dialing. Accountcodes also propagate when channels enter or leave a basic
or stasis-mixing bridge. The peeraccount value only makes sense for
mixing bridges with two channels; it is meaningless otherwise.
* Made peeraccount functional by changing accountcode propagation as
described above.
* Fixed CEL extracting the wrong ie value for the peeraccount. This was
done intentionally in Asterisk v1.8 when that version had to punt on
peeraccount.
* Fixed a few places dealing with accountcodes that were reading from
channels without the lock held.
AFS-65 #close
Review: https://reviewboard.asterisk.org/r/3601/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419520 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch serves two purposes:
(1) It fixes some bugs with endpoint subscriptions not reporting all of the
channel events
(2) It serves as the preliminary work needed for ASTERISK-23692, which allows
for sending/receiving arbitrary out of call text messages through ARI in a
technology agnostic fashion.
The messaging functionality described on ASTERISK-23692 requires two things:
(1) The ability to send/receive messages associated with an endpoint. This is
relatively straight forwards with the endpoint core in Asterisk now.
(2) The ability to send/receive messages associated with a technology and an
arbitrary technology defined URI. This is less straight forward, as
endpoints are formed from a tech + resource pair. We don't have a
mechanism to note that a technology that *may* have endpoints exists.
This patch provides such a mechanism, and fixes a few bugs along the way.
The first major bug this patch fixes is the forwarding of channel messages
to their respective endpoints. Prior to this patch, there were two problems:
(1) Channel caching messages weren't forwarded. Thus, the endpoints missed
most of the interesting bits (such as channel creation, destruction, state
changes, etc.)
(2) Channels weren't associated with their endpoint until after creation.
This resulted in endpoints missing the channel creation message, which
limited the usefulness of the subscription in the first place (a major use
case being 'tell me when this endpoint has a channel'). Unfortunately,
this meant another parameter to ast_channel_alloc. Since not all channel
technologies support an ast_endpoint, this patch makes such a call
optional and opts for a new function, ast_channel_alloc_with_endpoint.
When endpoints are created, they will implicitly create a technology endpoint
for their technology (if one does not already exist). A technology endpoint is
special in that it has no state, cannot have channels created for it, cannot
be created explicitly, and cannot be destroyed except on shutdown. It does,
however, have all messages from other endpoints in its technology forwarded to
it.
Combined with the bug fixes, we now have Stasis messages being properly
forwarded. Consider the following scenario: two PJSIP endpoints (foo and bar),
where bar has a single channel associated with it and foo has two channels
associated with it. The messages would be forwarded as follows:
channel PJSIP/foo-1 --
\
--> endpoint PJSIP/foo --
/ \
channel PJSIP/foo-2 -- \
---- > endpoint PJSIP
/
channel PJSIP/bar-1 -----> endpoint PJSIP/bar --
ARI, through the applications resource, can:
- subscribe to endpoint:PJSIP/foo and get notifications for channels
PJSIP/foo-1,PJSIP/foo-2 and endpoint PJSIP/foo
- subscribe to endpoint:PJSIP/bar and get notifications for channels
PJSIP/bar-1 and endpoint PJSIP/bar
- subscribe to endpoint:PJSIP and get notifications for channels
PJSIP/foo-1,PJSIP/foo-2,PJSIP/bar-1 and endpoints PJSIP/foo,PJSIP/bar
Note that since endpoint PJSIP never changes, it never has events itself. It
merely provides an aggregation point for all other endpoints in its technology
(which in turn aggregate all channel messages associated with that endpoint).
This patch also adds endpoints to res_xmpp and chan_motif, because the actual
messaging work will need it (messaging without XMPP is just sad).
Review: https://reviewboard.asterisk.org/r/3760/
ASTERISK-23692
........
Merged revisions 419196 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419203 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds a new operation for stored recordings, copy. It takes an
existing stored recording and makes a copy of it in the same directory
or a relative directory under the stored recording directory.
/ari/recordings/stored/{recordingName}/copy?destinationRecordingName={copy_name}
This is particularly useful for voicemail-esque applications, which may need to
copy or move recordings around a directory structure.
Review: https://reviewboard.asterisk.org/r/3768/
ASTERISK-24036 #close
Reported by: Sam Galarneau
Tested by: Sam Galarneau
........
Merged revisions 419021 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419022 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a reference count goes negative, instead of
just logging that fact, be more helpful with a
backtrace and an assert that will DO_CRASH.
This patch also removes the duplicate ao2_bt()
function and cleans up extraneous usage of the
ast_log_backtrace() call.
Review: https://reviewboard.asterisk.org/r/3765/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418963 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Whenever possible, audiohooks and framehooks will now be copied over
to the channel that the masquerading channel gets cloned into. This
should occur for all audiohooks and most framehooks. As a result,
in Asterisk 12.5 and up, the AUDIOHOOK_INHERIT function is now
deprecated and its behavior is essentially the new default for all
audiohooks, plus some additional audiohooks/framehooks.
Review: https://reviewboard.asterisk.org/r/3721/
........
Merged revisions 418914 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418936 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Most channel drivers let you specify a default accountcode to be set on
channels associated with a particular peer/endpoint/object. Prior to this
patch, chan_pjsip/res_pjsip did not support such a setting.
This patch adds a new setting to the res_pjsip endpoint object, 'accountcode'.
When a channel is created that is associated with an endpoint with this value
set, the channel will automatically have its accountcode property set to the
value configured for the endpoint.
Review: https://reviewboard.asterisk.org/r/3724/
ASTERISK-24000 #close
Reported by: Matt Jordan
........
Merged revisions 418756 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418757 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds support for the PostgreSQL application_name connection setting.
When the appropriate PostgreSQL module's configuration is set with an
application name, the name will be passed to PostgreSQL on connection and
displayed in the database's pg_stat_activity view, as well as in CSV logs. This
aids in managing which applications/servers are connected to a PostgreSQL
database, as well as tracing the activity of those connections.
Review: https://reviewboard.asterisk.org/r/3591
ASTERISK-23737 #close
Reported by: Gergely Domodi
patches:
pgsql_application_name.patch uploaded by Gergely Domodi (License 6610)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418755 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Create a Stasis bridge sub-class to propagate linkedids and
accountcodes.
* Fixed the basic bridge sub-class to update peeraccount codes when the
number of channels in the bridge drops back down to two parties.
* Refactored ast_bridge_channel_update_accountcodes() to handle channels
joining/leaving the bridge.
* Fixed the basic bridge sub-class to not call the base bridge class pull
method twice.
AFS-105 #close
ASTERISK-23852 #close
Reported by: Richard Mudgett
Review: https://reviewboard.asterisk.org/r/3720/
........
Merged revisions 418225 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418226 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The dtls_perform_handshake function was mistakenly placed under the guards for
USE_PJPROJECT. If PJPROJECT was not installed, the function would not be
defined, while other functions would attempt to still use it. This prevented
res_rtp_asterisk from being loaded.
ASTERISK-24001 #close
Reported by: Don Fanning
........
Merged revisions 418172 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418174 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes two bugs:
1. When originating a channel into a Stasis application, we already create a
subscription for the channel that is going into our Stasis app.
Unfortunately, when you create a Local channel and pass it off to a Stasis
app, you really aren't creating just one channel: you're creating two. This
patch snags the second half of the Local channel pair (assuming it is a
Local channel pair, but luckily core_local is kind about such assumptions)
and subscribes to it as well.
2. Subscriptions are a bit sticky right now. If a subscription is made, the
'interest' count gets bumped on the Stasis subscription - but unless
something explicitly unsubscribes the channel, said subscription sticks
around. This is not much of a problem is a user is creating the subscription
- if they made it, they must want it. However, when we are creating
implicit subscriptions, we need to make sure something clears them out.
This patch takes a pessimistic approach: it watches the cache updates
coming from Stasis and, if we notice that the cache just cleared out an
object, we delete our subscription object. This keeps our ao2 container of
Stasis forwards in an application from growing out of hand; it also is a
bit more forgiving for end users who may not realize they were supposed to
unsubscribe from that channel that just hung up.
Review: https://reviewboard.asterisk.org/r/3710/
#ASTERISK-23939 #close
........
Merged revisions 418089 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418090 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This corrects two issues with the extra field information in Asterisk
12+ in channel event logs.
It is possible to inject custom values into the dialstatus provided by
ast_channel_dial_type() Stasis messages that fall outside the
enumeration allowed for the DIALSTATUS channel variable. CEL now
filters for the allowed values and ignores other values.
The "hangupsource" extra field key is always blank if the far end
channel is a chan_pjsip channel. This is because the hangupsource is
never set for the pjsip channel driver. This change sets the
hangupsource whenever a hangup is queued for chan_pjsip channels.
This corrects an issue with the pjsip channel driver where the
hangupcause information was not being set properly.
Review: https://reviewboard.asterisk.org/r/3690/
........
Merged revisions 418071 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418084 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Billing records are fair,
To get paid is quite bright,
You should really use ODBC;
Good-bye cdr_sqlite.
Microsoft did once push H.323,
Hell, we all remember NetMeeting.
But try to compile chan_h323 now
And you will take quite a beating.
The XMPP and SIP war was fierce,
And in the distant fray
Was birthed res_jabber/chan_jingle;
But neither to stay.
For everyone did care and chase what Google professed.
"Free Internet Calling" was what devotees cried,
But Google did change the specs so often
That the developers were happy the day chan_gtalk died.
And then there was that odd application
Dedicated to the Polish tongue.
app_saycountpl was subsumed by Say;
One could say its bell was rung.
To read and parse a file from the dialplan
You could (I guess) use an application.
app_readfile did fill that purpose, but I think
A function is perhaps better in its creation.
Barging is rude, I'm not sure why we do it.
Inwardly, the caller will probably sigh.
But if you really must do it,
Don't use app_dahdibarge, use ChanSpy.
We all despise the sound of tinny robots
It makes our queues so cold.
To control such an abomination
It's better to not use Wait/SetMusicOnHold.
It's often nice to know properties of a channel
It makes our calls right
We have a nice function called CHANNEL
And so SIPCHANINFO is sent off into the night.
And now things get odd;
Apparently one could delimit with a colon
Properties from the SIPPEER function!
Commas are in; all others are done.
Finally, a word on pipes and commas.
We're sorry. We can't say it enough.
But those compatibility options in asterisk.conf;
To maintain them forever was just too tough.
This patch removes:
* cdr_sqlite
* chan_gtalk
* chan_jingle
* chan_h323
* res_jabber
* app_saycountpl
* app_readfile
* app_dahdibarge
It removes the following applications/functions:
* WaitMusicOnHold
* SetMusicOnHold
* SIPCHANINFO
It removes the colon delimiter from the SIPPEER function.
Finally, it also removes all compatibility options that were configurable from
asterisk.conf, as these all applied to compatibility with Asterisk 1.4 systems.
Review: https://reviewboard.asterisk.org/r/3698/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418019 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Persistent HTTP connection support is needed due to the increased usage of
the Asterisk core HTTP transport and the frequency at which REST API calls
are going to be issued.
* Add http.conf session_keep_alive option to enable persistent
connections.
* Parse and discard optional chunked body extension information and
trailing request headers.
* Increased the maximum application/json and
application/x-www-form-urlencoded body size allowed to 4k. The previous
1k was kind of small.
* Removed a couple inlined versions of ast_http_manid_from_vars() by
calling the function. manager.c:generic_http_callback() and
res_http_post.c:http_post_callback()
* Add missing va_end() in ast_ari_response_error().
* Eliminated unnecessary RAII_VAR() use in http.c:auth_create().
ASTERISK-23552 #close
Reported by: Scott Griepentrog
Review: https://reviewboard.asterisk.org/r/3691/
........
Merged revisions 417880 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417901 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The variables body parameter under the originate and originate with id
operations of the channel resource showed invalid JSON in its description.
The variables body parameter under the userEvent operation of the event
resource made no mention that the custom key/value pairs should be wrapped
in a variables key in order to be added to the custom user event.
ASTERISK-23975 #close
Review: https://reviewboard.asterisk.org/r/3692/
........
Merged revisions 417878 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417879 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
res_rtp_asterisk: Add SHA-256 support for DTLS and perform DTLS negotiation on RTCP.
This change fixes up DTLS support in res_rtp_asterisk so it can accept and provide
a SHA-256 fingerprint, so it occurs on RTCP, and so it occurs after ICE negotiation
completes. Configuration options to chan_sip and chan_pjsip have also been added to
allow behavior to be tweaked (such as forcing the AVP type media transports in SDP).
ASTERISK-22961 #close
Reported by: Jay Jideliov
Review: https://reviewboard.asterisk.org/r/3679/
Review: https://reviewboard.asterisk.org/r/3686/
........
Merged revisions 417678 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417679 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In the abstraction effort, this bit of logic got messed up. We
want to recreate the persistence if things go well, not if things
fail.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417663 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A number of various PJSIP AMI actions were failing to parse out and place the
ActionID into their responses. This patch updates the various PJSIP actions
such that the passed in ActionID is emitted on any event list complete events,
as well as any intermediate events created as a result of the action.
#ASTERISK-23947 #close
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/3675/
........
Merged revisions 417460 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417461 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a client takes a long time to process information received from Asterisk,
a write operation using fwrite may fail to write all information. This causes
the underlying file stream to be in an unknown state, such that the socket
must be disconnected. Unfortunately, there are two problems with this in
Asterisk's existing websocket code:
1. Periodically, during the read loop, Asterisk must write to the connected
websocket to respond to pings. As such, Asterisk maintains a reference to
the session during the loop. When ast_http_websocket_write fails, it may
cause the session to decrement its ref count, but this in and of itself
does not break the read loop. The read loop's write, on the other hand,
does not break the loop if it fails. This causes the socket to get in a
'stuck' state, preventing the client from reconnecting to the server.
2. More importantly, however, is that the fwrite in ast_http_websocket_write
fails with a large volume of data when the client takes awhile to process
the information. When it does fail, it fails writing only a portion of
the bytes. With some debugging, it was shown that this was failing in a
similar fashion to ASTERISK-12767. Switching this over to ast_careful_fwrite
with a long enough timeout solved the problem.
Note that this version of the patch, unlike r417310 in Asterisk 11, exposes
configuration options beyond just chan_sip's sip.conf. Configuration options
to configure the write timeout have also been added to pjsip.conf and ari.conf.
#ASTERISK-23917 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3624/
........
Merged revisions 417310 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 417311 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417317 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This helps to pave the way for RLS work that is to come.
Since this is a self-contained change and subscription
tests still pass, this work is being committed directly
to trunk instead of a working branch.
ASTERISK-23865 #close
Review: https://reviewboard.asterisk.org/r/3628
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417233 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added ast_sockaddr_cidr_bits() to count the 1 bits in an ast_sockaddr.
* Added ast_ha_join_cidr() which uses ast_sockaddr_cidr_bits() for the netmask
instead of ast_sockaddr_stringify_addr.
* Changed res_pjsip_endpoint_identifier_ip to call ast_ha_join_cidr() instead
of ast_ha_join() for the CLI output.
This is a CLI change only. AMI was not affected.
Tested by: George Joseph
Review: https://reviewboard.asterisk.org/r/3652/
........
Merged revisions 416737 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@416738 65c4cc65-6c06-0410-ace0-fbb531ad65f3
pjpidf_print() does not return < 0 if there is not enough
room for the document to be printed. Rather, it returns
39, the length of the XML prolog.
The algorithm also had a bug in that it would return if
it attempted to grow the string larger.
........
Merged revisions 416442 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@416444 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Kinsey Moore
Mark Michelson
Matthew Jordan
Joshua Colp
George Joseph
Jonathan Rose
Richard Mudgett
Kevin Harwell
Corey Farrell
Scott Griepentrog
Malcolm Davenport
Walter Doekes
Sean Bright
Sam Galarneau