for more details of this command.
(closes issue #13326)
Reported by: ib2
Patches:
bug13326_trunk_20080822.diff uploaded by snuffy (license 35)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@150311 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: nickpeirson
Patches:
pbx.c.patch uploaded by nickpeirson (license 579)
replace_bzero+bcopy.patch uploaded by nickpeirson (license 579)
Tested by: nickpeirson, murf
1. replaced all refs to bzero and bcopy to memset and memmove instead.
2. added a note to the CODING-GUIDELINES
3. add two macros to asterisk.h to prevent bzero, bcopy from creeping
back into the source
4. removed bzero from configure, configure.ac, autoconfig.h.in
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@147807 65c4cc65-6c06-0410-ace0-fbb531ad65f3
more merge compatible in the mISDN area.
channels/chan_misdn.c
* Eliminated redundant code in cb_events() EVENT_SETUP
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@145200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made bearer2str() use allowed_bearers_array[]
* Made use the causes.h defines instead of hardcoded numbers.
* Made use Asterisk presentation indicator values if either of the
mISDN presentation or screen options are negative.
* Updated the misdn_set_opt application option descriptions.
* Renamed the awkward Caller ID presentation misdn_set_opt
application option value not_screened to restricted.
Deprecated the not_screened option value.
channels/misdn/isdn_lib.c
* Made use the causes.h defines instead of hardcoded numbers.
* Fixed some spelling errors and typos.
* Added all defined facility code strings to fac2str().
channels/misdn/isdn_lib.h
* Added doxygen comments to struct misdn_bchannel.
channels/misdn/isdn_lib_intern.h
* Added doxygen comments to struct misdn_stack.
channels/misdn_config.c
configs/misdn.conf.sample
* Updated the mISDN presentation and screen parameter descriptions.
doc/tex/misdn.tex
* Updated the misdn_set_opt application option descriptions.
* Fixed some spelling errors and typos.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@138738 65c4cc65-6c06-0410-ace0-fbb531ad65f3
respectively. Also, take the opportunity to clean up the CLI prompt
generation code.
(closes issue #13175)
Reported by: eliel
Patches:
cliprompt.patch uploaded by eliel (license 64)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@134353 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r132645 | oej | 2008-07-22 22:10:26 +0200 (Tis, 22 Jul 2008) | 9 lines
The most common question on the #asterisk iRC channel and on mailing lists
seems to be in regards to an error message when retransmit fails. This
is frequently misunderstood as a failure of Asterisk, not a failure of
the network to reach the other party.
This document tries to assist the Asterisk user in sorting out these
issues by explaining the logic and pointing at some possible
causes. Hopefully, we will get other questions now :-)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@132703 65c4cc65-6c06-0410-ace0-fbb531ad65f3
To make sure nobody commits script-modified files we first make a backup
of asterisk.tex, run the script, generate the pdf and / or html,
and put the original asterisk.tex back.
This will guard us for the stuff that happened before that someone committed
a locally modified asterisk.tex, with changes done by this script.
(closes issue #13062)
Reported by: mvanbaak
Patches:
sed_without-i-v3.diff uploaded by mvanbaak (license 7)
Tested by: mvanbaak
Feedback from Corydon. Thanks for taking the time to go through this.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@130578 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This section covers some locking fundamentals, as well as some information on
locking as it is used in Asterisk. It describes some of the ways that are used
and could be used to achieve deadlock avoidance. It also demonstrates the
unfortunate conclusion that with the use of recursive locks, none of the
constructs in use today are failsafe from deadlocks. Finally, it makes some
recommendations for new code being written. As proper locking strategies is a
complex subject, this section still has room for expansion and improvement.
This is a result of collaboration between Luigi Rizzo and myself on the
asterisk-dev mailing list.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@127363 65c4cc65-6c06-0410-ace0-fbb531ad65f3
FreeTDS 0.60. Update the docs to reflect that we can now compile and run
against all modern releases of FreeTDS (0.60 through 0.82)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@126513 65c4cc65-6c06-0410-ace0-fbb531ad65f3
They want (char *)NULL as sentinel.
An example is OpenBSD (confirmed on 4.3) that ships with gcc 3.3.4
This commit introduces a contstant SENTINEL which is declared as:
#define SENTINEL ((char *)NULL)
All places I could test compile on my openbsd system are converted.
Update CODING-GUIDELINES to tell about this constant.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@124127 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit merges in the rest of the code needed to support distributed device
state. There are two main parts to this commit.
Core changes:
- The device state handling in the core has been updated to understand device
state across a cluster of Asterisk servers. Every time the state of a device
changes, it looks at all of the device states on each node, and determines the
aggregate device state. That resulting device state is what is provided to
modules in Asterisk that take actions based on the state of a device.
New module, res_ais:
- A module has been written to facilitate the communication of events between
nodes in a cluster of Asterisk servers. This module uses the SAForum AIS
(Service Availability Forum Application Interface Specification) CLM and EVT
services (Cluster Management and Event) to handle this task. This module
currently supports sharing Voicemail MWI (Message Waiting Indication) and
device state events between servers. It has been tested with openais, though
other implementations of the spec do exist.
For more information on testing distributed device state, see the following doc:
- doc/distributed_devstate.txt
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@121559 65c4cc65-6c06-0410-ace0-fbb531ad65f3
DUNDi uses a concept called the Entity ID for unique server identifiers. I have
pulled out the handling of EIDs and made it something available to all of Asterisk.
There is now a global Entity ID that can be used for other purposes as well, such
as code providing distributed device state, which is why I did this. The global
Entity ID is set automatically, just like it was done in DUNDi, but it can also be
set in asterisk.conf. DUNDi will now use this global EID unless one is specified
in dundi.conf.
The current EID for the system can be seen in the "core show settings" CLI command.
It is also available in the dialplan via the ENTITYID variable.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@121439 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(closes issue #12705)
Reported by: ctooley
Patches:
new_externalivr_argument_format-v2.diff uploaded by ctooley (license 136)
new_externalivr_documentation.diff uploaded by ctooley (license 136)
and a few additional fixes by me
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@117725 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit adds some new features to the SMDI_MSG_RETRIEVE() dialplan function.
Previously, this function only allowed searching by the forwarding station.
I have added some options to allow you to also search for messages in the queue
by the message desk terminal ID, as well as the message desk number.
This originally came up as a suggestion on the asterisk-dev mailing list.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@115021 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: atis
Tested by: murf
This upgrade adds the ~~ (concatenation) string operator to expr2.
While not needed in normal runtime pbx operation, it is needed when
raw exprs are being syntax checked. This plays into future syntax-
unification plans. By permission of atis, this addition in trunk
and the reason of why things are as they are will suffice to close
this bug.
I also added a short note about the previous addition of "sip show sched"
to the CLI in CHANGES, which I discovered I forgot in a previous commit.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114423 65c4cc65-6c06-0410-ace0-fbb531ad65f3
an attended transfer over AMI
(closes issue #10585)
Reported by: ornati
Patches:
atxfer-trunk-r90428.diff uploaded by ornati (license 210)
(with modifications from me)
Tested by: putnopvut
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@106236 65c4cc65-6c06-0410-ace0-fbb531ad65f3
that if we keep this in the tree, it will be much easier to keep up to date.
The page on asterisk.org just links to this on svn.digium.com/view
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@104419 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r103722 | mmichelson | 2008-02-15 11:26:37 -0600 (Fri, 15 Feb 2008) | 8 lines
Final round of changes for configure script logic for IMAP
Now if a directory is specified, then we will search that directory for
a source installation of the IMAP toolkit. If none is found, then we will
use that directory as the basis for detecting a package installation of
the IMAP c-client. If that check fails, then configure will fail.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@103725 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This set of changes introduces TCP and TLS support for chan_sip. There are various
new options in configs/sip.conf.sample that are used to enable these features. Also,
there is a document, doc/siptls.txt that describes some things in more detail.
This code was implemented by Brett Bryant and James Golovich. It was reviewed
by Joshua Colp and myself. A number of other people participated in the testing
of this code, but since it was done outside of the bug tracker, I do not have their
names. If you were one of them, thanks a lot for the help!
(closes issue #4903, but with completely different code that what exists there.)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@99085 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the HTTP request for the config came in on and the SERVER_PORT to the
bindport setting in sip.conf. I've left in the ability to override these
options, because I can't always guess how someone might decide to do something
weird with what is available to them--although needing to is pretty unlikely.
Documentation was updated to reflect preference for not setting serveraddr,
serveriface, or serverport. Tested on Linux and OS X.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@98988 65c4cc65-6c06-0410-ace0-fbb531ad65f3
run "make asterisk.pdf" when not all of the right packages are installed.
(closes issue #10763)
Reported by: Corydon76
Patches:
20070919__bug10763.diff.txt uploaded by Corydon76 (license 14)
Tested by: Corydon76
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@98454 65c4cc65-6c06-0410-ace0-fbb531ad65f3
based on configuration templates that use Asterisk dialplan function and
variable substitution. It should be possible to create phone profiles and
templates that work for the majority of phones provisioned over http. It
is currently only intended to provision a single user account per phone.
An example profile and set of templates for Polycom phones is provided.
NOTE: Polycom firmware is not included, but should be placed in
AST_DATA_DIR/phoneprov/configs to match up with the included templates.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@97634 65c4cc65-6c06-0410-ace0-fbb531ad65f3
go a long way towards preventing unexplainable hangs experienced by people. In the
case of MWI hangs, this also will mean that the SIP port isn't blocked anymore.
(closes issue #11665, reported by yehavi)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@96934 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the QUEUE_MAX_PENALTY and the newly introduced QUEUE_MIN_PENALTY during a call depending
on the amount of time passed. The purpose is to allow the call to open up to more (or maybe
just different) members without the caller's losing his place in the queue. See
configs/queuerules.conf.sample for an example of how to set up queue rules and configs/queues.conf.sample
for how to associate a rule with a queue.
Along with the functional changes, new CLI and manager commands exist to show the rules defined and
there is an additional CLI command to reload the queue rules.
Future enhancements that may be made: support for realtime queue rules and support for dynamically adding
a rule through the manager or CLI. Also a manager command to reload the queue rules (I'll probably write
this myself very soon).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@94370 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Refer to the proper documentation
- Implement separate signalling/media QoS/CoS in many channels using RTP
- Improve warnings and verbose messages
- Deprecate some old settings
Minor modifications by me, a big effort from IgorG.
Thanks!
Reported by: IgorG
Patches:
qoscleanup-89394-4-trunk.patch uploaded by IgorG (license 20)
Tested by: IgorG
(closes issue #11145)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93163 65c4cc65-6c06-0410-ace0-fbb531ad65f3
much identical to the S() and L() options to Dial(). They let you set
timeouts for the conference, as well as have warning sounds played to
let the caller know how much time is left, and when it is running out.
(closes issue #8030)
Reported by: areski
Patches:
meetme_timeout_timelimit_v2.patch uploaded by areski (license 29)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89069 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This introduces a new channel driver, chan_unistim, that supports the Unistim
VoIP protocol for Nortel phones. The following models have been confirmed
to work: i2002, i2004 and i2050.
(closes issue #8864)
Reported by: c_hans
Patches:
chan_unistim.patch uploaded by c (license 304)
ustm_no_conf.diff uploaded by junky (license 177)
Tested by: c_hans, dbowerman, math, junky, loloski
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@88368 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Many uses of the astlisting environment around verbatim text to ensure that
it gets properly formatted and doesn't run off the page.
- Update some things that have been deprecated.
- Add escaping as needed
- and more ...
(closes issue #10978)
Reported by: IgorG
Patches:
texdoc-85542-1.patch uploaded by IgorG (license 20)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@85547 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Added development section (backtrace.tex)
- Correct filesystem path formating
- Replace all "|" argument separator to ","
- Endless count of spaces at the end of line
- Using astlisting to make listings do not take so much place
- Take back ASTRISKVERSION on first page
- Make localchannel.tex readable by inserting extra end of lines
(closes issue #10962)
Reported by: IgorG
Patches:
texdoc-85177-1.patch uploaded by IgorG (license 20)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@85519 65c4cc65-6c06-0410-ace0-fbb531ad65f3
in the Dial command. The 'j' option _must_ be used in conjunction with the 'n'
option.
This feature will allow you to use the existing jitterbuffer implementation to
put a jitterbuffer on incoming SIP calls connecting to Asterisk applications by
putting a local channel in the middle.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@85097 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: nic_bellamy
Patches:
2006-10-03_svn_44249_voicemail_lockmode_v3.patch uploaded by nic_bellamy (license 213)
Add support for configurable file locking methods. The default is "lockfile",
which is the old behavior. There is an additional option, "flock", which is
intended for use in situations where the lockfile method will not work, such as
with SMB/CIFS mounts.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@81233 65c4cc65-6c06-0410-ace0-fbb531ad65f3
for extracting application, function, manager, and agi documentation is the wrong
one to take. The most severe problem is that the output depends on which modules
are loaded as well as compile time options, which both determine which parts are
available.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@72986 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Add a Makefile in doc/tex/ for generating PDF and HTML
* Add a README.txt file to doc/tex/ to document which tools are used and what
web sites to visit for getting them.
* Update build_tools/prep_tarball to put the proper Asterisk version string
in the automatically generated PDF for release tarballs
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@72982 65c4cc65-6c06-0410-ace0-fbb531ad65f3
entries in the queue log.
(issue #7561, reported and originally patched by fkasumovic, patch slightly
modified and updated to trunk by me)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@62462 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r58931 | russell | 2007-03-15 17:25:12 -0500 (Thu, 15 Mar 2007) | 13 lines
Merge changes from svn/asterisk/team/russell/LaTeX_docs.
* Convert most of the doc directory into a single LaTeX formatted document
so that we can generate a PDF, HTML, or other formats from this
information.
* Add a CLI command to dump the application documentation into LaTeX format
which will only be include if the configure script is run with
--enable-dev-mode.
* The PDF turned out to be close to 1 MB, so it is not included. However, you
can simply run "make asterisk.pdf" to generate it yourself. We may include
it in release tarballs or have automatically generated ones on the web site,
but that has yet to be decided.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@58932 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Add new module, cdr_sqlite3_custom which allows logging custom CDRs into a
SQLite3 database. (issue #7149, alerios)
* Add new module, res_config_sqlite, which adds realtime database configuration
support for SQLite version 2. I decided that this was ok since we didn't have
any realtime support for version 3. If someone ports this to version 3, then
version 2 support can be removed or marked deprecated.
(issue #7790, rbarun_proformatique)
* Mark cdr_sqlite as deprecated in favor of cdr_sqlite3_custom.
Also, note that there were other modules on the bug tracker that did not make
the cut because they provided some duplicated functionality. Those are:
* cdr_sqlite3 (issue #6754, moy)
* cdr_sqlite3 (issue #8694, bsd)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@58866 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r58638 | russell | 2007-03-09 17:59:10 -0600 (Fri, 09 Mar 2007) | 8 lines
Merge some updates to the SLA documentation. I plan to keep working on this
to explain all of the expected behavior with call handling, configuration
details for specific phones, and other things. However, I got tired of doing
it in plain text, so I switched to using LaTeX. I have included the PDF version.
I haven't been able to get a nice looking plain text version out of it yet, but
I'm not terribly concerned since this is supposed to be more of the manual,
while the plain text sample configuration file is the reference.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@58639 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r57364 | russell | 2007-03-01 17:42:53 -0600 (Thu, 01 Mar 2007) | 16 lines
Merge changes from svn/asterisk/team/russell/sla_updates
* Originally, I put in the documentation that only Zap interfaces would be
supported on the trunk side. However, after a discussion with Qwell, we came
up with a way to make IP trunks work as well, using some things already in
Asterisk. So, here it is, this now officially supports IP trunks.
* Update the SLA documentation to reflect how to setup IP trunks.
* Add a section in sla.txt that describes how to set up an SLA system with
voicemail.
* Simplify the way DTMF passthrough is handled in MeetMe.
* Fix a bug that exposed itself when using a Local channel on the trunk side
in SLA. The station's channel needs to be passed to the dial API when
dialing the trunk.
* Change a WARNING message to DEBUG in channel.h. This message is of no use
to users.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@57365 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r56277 | russell | 2007-02-22 17:08:36 -0600 (Thu, 22 Feb 2007) | 18 lines
Merge changes from team/russell/sla_updates.
This batch of changes to the SLA code does a few different things.
* I made the SLA code event driven instead of having to act in a lot of busy
loops while dialing things to wait for state changes. This makes the code
more efficient and readable at the same time.
* I have implemented a couple of new features. The first is inbound trunk
ringing timeouts. This is an option that defines how long to let an incoming
call on a trunk to ring.
* I have also implemented ring timeouts for stations. They may be specified
for the entire station, meaning it is how long to let the station ring before
giving up. You can also specify a ring timeout for a specific trunk on a
station. So, you can say that you only want a specific station to ring 5
seconds if it is line1 ringing, but otherwise, there is no timeout.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@56278 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r53810 | russell | 2007-02-09 18:35:09 -0600 (Fri, 09 Feb 2007) | 24 lines
Merge team/russell/sla_rewrite
This is a completely new implementation of the SLA functionality introduced in
Asterisk 1.4. It is now functional and ready for testing. However, I will be
adding some additional features over the next week, as well.
For information on how to set this up, see configs/sla.conf.sample
and doc/sla.txt.
In addition to the changes in app_meetme.c for the SLA implementation itself,
this merge brings in various other changes:
chan_sip:
- Add the ability to indicate HOLD state in NOTIFY messages.
- Queue HOLD and UNHOLD control frames even if the channel is not bridged to
another channel.
linkedlists.h:
- Add support for rwlock based linked lists.
dial.c:
- Add the ability to run ast_dial_start() without a reference channel to
inherit information from.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@53817 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r49313 | crichter | 2007-01-03 10:06:50 +0100 (Mi, 03 Jan 2007) | 41 lines
Merged revisions 48319,48321,48467,48552,48576,49135,49303 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r48319 | crichter | 2006-12-06 15:35:25 +0100 (Mi, 06 Dez 2006) | 1 line
changed a few debugs to higher debug levels
........
r48321 | crichter | 2006-12-06 16:48:45 +0100 (Mi, 06 Dez 2006) | 1 line
added the export and import of the MISDN_ADDRESS_COMPLETE Variable to inidcate wether the extension is already completely dialed or if there might come additional digits by information elements. also added some docs for that.
........
r48467 | crichter | 2006-12-14 14:03:49 +0100 (Do, 14 Dez 2006) | 1 line
removed FIXUP state. added check for channel allocation conflict when we create a setup while the other site creates a setup on the same channel, besides the check we resolve this conflict.
........
r48552 | crichter | 2006-12-18 11:19:39 +0100 (Mo, 18 Dez 2006) | 1 line
when our PTP Partner sends us a SETUP with a preselected channel we just accept it, even when we're NT. added some checks for segfaults.
........
r48576 | crichter | 2006-12-19 14:08:51 +0100 (Di, 19 Dez 2006) | 1 line
when we reject a channel, because it's in use already, we shouldn't process the setup anymore. made the channel allocation a bit easier and more understandable, removed a few unused lines
........
r49135 | crichter | 2007-01-02 11:07:22 +0100 (Di, 02 Jan 2007) | 1 line
added check for channel ranges in the set/empty channel functions. set pmp_l1_check default to no. added misdn restart pid cli command. added cleaning of channel when we send a RELEASE_COMPLETE.
........
r49303 | crichter | 2007-01-03 09:24:00 +0100 (Mi, 03 Jan 2007) | 9 lines
* Added check for bridging in misdn_call to avoid setting echocancellation
when 2 mISDN channels are involved and when bridging is set. That lead
to a kernel panic before under different situations, because we switched
about 2 times between hardware bridging and echocancelation
* readded MISDN_URATE variable which got lost before, this should make app_v110
work again
* fixed typo
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@49321 65c4cc65-6c06-0410-ace0-fbb531ad65f3
switch in the dialplan by setting the DUNDIDIALARGS channel variable.
(issue #8084, patch by bluecrow76, with small modifications and documentation
updates)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@46781 65c4cc65-6c06-0410-ace0-fbb531ad65f3
As of 2004-12-23, this documentation is no longer maintained. The doxygen documentation
generated from linkedlists.h should be referred to in its place, as it is more complete
and better maintained.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@44877 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Technically, ooh323 doesn't support it yet, but there is a patch that should be committed very soon.
Issue #7989, patch by DEA, slightly modified.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@43344 65c4cc65-6c06-0410-ace0-fbb531ad65f3
BJ Weschke
Mark Michelson
Leif Madsen
Steve Murphy
Richard Mudgett
Michiel van Baak
Tilghman Lesher
Russell Bryant
Sean Bright
Kevin P. Fleming
Olle Johansson
Luigi Rizzo
Jeff Gehlbach
Jeff Peeler
Donny Kavanagh
Jason Parker
Brett Bryant
Terry Wilson
Joshua Colp
Matthew Fredrickson
Dwayne M. Hubbard
TransNexus OSP Development
Christian Richter
Paul Cadach