This commit caused issues with polling when combined with
the revert commit "Revert "app_voicemail: Remove need to subscribe to stasis"
This reverts commit 17d6d9e1e7.
ASTERISK-28222
Reported by: abelbeck
Change-Id: Ib6a16cbe2c0b74c76c64264f525ab647959c1483
This adds documentation to handle_cli_malloc_trim() indicating how it
can be useful when debugging OOM conditions.
Change-Id: I1936185e78035bf123cd5e097b793a55eeebdc78
We've had multiple opportunities where Richard Mudgett's
malloc_trim patch has been useful. Let's get it
pushed up to gerrit and merged.
Since malloc_trim is only available in libc, an entry is
added to configure.ac to create a definition for
HAVE_MALLOC_TRIM.
Change-Id: Ia38308c550149d9d6eae4ca414a649957de9700c
This reverts commit 29115e2384.
That commit closed a long standing hole which allowed subscriptions
to mailboxes that weren't configured in voicemail.conf. This
caused an issue with FreePBX which depdended on that behavior.
The commit is being reverted until FreePBX can handle the new
behavior.
ASTERISK-28151
Reported by: Ronald Raikes
Change-Id: I57b7b85e75d7dd97c742b5c69d718a0f61260c15
These are only a few of the leaks. The large number of macros
and return paths in this file would make a weeks worth of work
to plug them all.
Change-Id: Ie2369fa944023d44767871c5c30974cb077ffb56
This brings in jansson-2.12, removes all patches that were merged
upstream. README is created in third-party/jansson/patches to explain
how to add patches but also because the patches folder must exist for
the build process to succeed.
Change-Id: If0f2d541c50997690660c21fb7b03d625a5cdadd
The marker bit set on the voice packet indicates the start
of a new stream and a new time stamp.
Need to reset the DTMF last sequence number and the timestamp
of the last END packet.
If the new time stamp is lower then the timestamp of the last DTMF END packet
the asterisk drops all DTMF frames as out of order.
This bug was caught using Cisco ip-phone SPA50X and codec g722.
On SIP session update the SPA50X resets stream indicating it with market bit
and a new timestamp is twice smaller then the previous.
ASTERISK-28162 #close
Change-Id: If9c5742158fa836ad549713a9814d46a5d2b1620
Replace usage of ao2_container_alloc with ao2_container_alloc_hash or
ao2_container_alloc_list.
ao2_container_alloc is now restricted to modules only and is being
removed from Asterisk 17.
Change-Id: I0907d78bc66efc775672df37c8faad00f2f6c088
Create ao2_container_dup_weakproxy_objs to perform a similar function to
ao2_container_dup. This function expects the source container to have
weakproxy objects, inserts the associated non-weak objects into the
destination container. Orphaned weakproxy objects are ignored.
Create test for this new function and for ao2_weakproxy_find.
Change-Id: I898387f058057e08696fe9070f8cd94ef3a27482
This patch makes it so only matching non-empty key names, and keys created by
the HASH function are eligible for inclusion in the comma separated string. It
also fixes a bug where it was possible to write to a negative index if the
result buffer was empty.
ASTERISK-28159
patches:
ASTERISK-28159.diff submitted by Michael Walton (license 6502)
Change-Id: I6e57fe7307dfd856271753aed5ba64c59b511487
The job timeouts were hard coded in the jenkinsfiles which
means changes had to go through gerrit. Now they are taken
from the following environment variables (and their defaults) that
can be set in Jenkins configuration...
TIMEOUT_GATES = "60 MINUTES"
TIMEOUT_DAILIES = "3 HOURS"
TIMEOUT_REF_DEBUG = "24 HOURS"
TIMEOUT_UNITTESTS = "30 MINUTES"
Change-Id: I673a551c1780bf665a3bc160b245da574aa4bbab
When a subscribe or unsubscribe occurs a message is published
containing this information. This change makes it so that the
message no longer uses stringfields or a lock, as both are not
really needed for the message.
Change-Id: I3f4831931d79f94fd979baf48048738df5dc1632
This replaces the inline functions with macros. This removes the need
to directly use __ao2_ref, opts instead for standard ao2_bump and
ao2_cleanup macros.
Change-Id: If4e04e9bab2e3c883188437cb9f487b3e498a21b
We've been seeing crashes in libbfd when we attempt to generate
a stack trace from multiple threads. It turns out that libbfd
is NOT thread-safe. It can cache the bfd structure and give it to
multiple threads without protecting itself. To get around this,
we've added a global mutex around the bfd functions and also have
refactored the use of those functions to be more efficient and
to provide more information about inlined functions.
Also added a few more tests to test_pbx.c. One just calls
ast_assert() and the other calls ast_log_backtrace(). Neither are
run by default.
WARNING: This change necessitated changing the return value of
ast_bt_get_symbols() from an array of strings to a VECTOR of
strings. However, the use of this function outside Asterisk is not
likely.
ASTERISK-28140
Change-Id: I79d02862ddaa2423a0809caa4b3b85c128131621
The res_ari(POST /channels/create handler) deos not check the endpoint
parameter length. And it causes core
dump.
Fixed it to check the parameter length. Also fixed memory leak.
ASTERISK-28169
Change-Id: Ibf10a9eb8a2e3a9ee1e13fbe748b2ecf955c3993
New dialplan function PJSIP_PARSE_URI added to parse an URI and return
a specified part of the URI.
This is useful when need to get part of the URI instead of cutting it
using a CUT function.
For example to get 'user' part of Remote URI
${PJSIP_PARSE_URI(${CHANNEL(pjsip,remote_uri)},user)}
ASTERISK-28144 #close
Change-Id: I5d828fb87f6803b6c1152bb7b44835f027bb9d5a
This change adds the ability for subscriptions to indicate
which message types they are interested in accepting. By
doing so the filtering is done before being dispatched
to the subscriber, reducing the amount of work that has
to be done.
This is optional and if a subscriber does not add
message types they wish to accept and set the subscription
to selective filtering the previous behavior is preserved
and they receive all messages.
There is also the ability to explicitly force the reception
of all messages for cases such as AMI or ARI where a large
number of messages are expected that are then generically
converted into a different format.
ASTERISK-28103
Change-Id: I99bee23895baa0a117985d51683f7963b77aa190
The testsuite can now use a user-specified work directory for
all it's temp files. This allows the docker containers to use
a tmpfs backed directory for the temp files instead of it's
own write-layer image.
* runTestsuite.sh now accepts a --work-dir command line argument
that gets exported as AST_WORK_DIR before running the testsuite.
* gates.jenkinsfile now specifies --work-dir to be
<testsuite_dir>/astroot.
Since the Asterisk CI docker hosts now mount /srv/jenkins/workspace
on a tmpfs, asterisk should be compiled and the testsuite run all in
memory.
Change-Id: If5ee905a15821296c355bb84cda38950ad8edc45
(cherry picked from commit a335f4c9ad)
There seems to be a race condition between starting the asterisk
daemon and attempting to use 'asterisk -r' that can cause the
control socket file to not be created. Since all of the Jenkins
slaves have 'expect' installed, the runUnittests script can use
it to start asterisk in the forground and issue the commands
interactively. This is much more reliable and it can also make
startup errors more visible since they'll be in the Jenkins console
output.
If 'expect' isn't installed, the original daemon/asterisk -r
process is used.
Also added a "core show settings" before running the tests
and added "notice,warning,error" to the console log.
Change-Id: Idd656085f854afede813ac241b9e312b31358160
Task processors are retrieved using a 'get or create' pattern. The
singleton container was unlocked between the get and create steps so
it's possible that two threads could create task processors with the
same name at the same time.
Change-Id: Id64fae94a6a1e940ddf38fde622dcd4391635382
We previously allowed resample and g711 codecs to be built when
TEST_FRAMEWORK was enabled. This could cause errors if the testsuite
was run without this option enabled. Switch the build system to allow
those codecs to be built when --enable-dev-mode is used. This removes a
chance for strange testsuite errors from use of an inadequate pjsua
binary.
Change-Id: Iee8a3613cdb711fa7e7d217c5a775a575907ae22
PJSIP assumes that these header names are not allocated, does not clone
the name strings when reusing headers.
Block unload of res_pjsip_caller_id until shutdown to ensure static
memory stays valid. It was previously unsafe to unload while any
sessions are active.
Change-Id: I190854dea943d6e441cf03733f8a0da661aea27f
The presence of Record-Route in re-invites is optional, thus it is
important to make sure the dialog doesn't have a routset before
rewriting the contact header.
ASTERISK-28129 #close
Change-Id: Ic8ceb54ccfc93f7e315e476c514a2c777f2da7dc
George Joseph
Kevin Harwell
Sean Bright
Chris-Savinovich
Jenkins2
lvl
Joshua Colp
Corey Farrell
Alexei Gradinari
Sungtae Kim
Torrey Searle