In an earlier release, inbound registrations on a reliable transport
were pruned on Asterisk restart since the TCP connection would have
been torn down and become unusable when Asterisk stopped. This same
process is now also applied to inbound subscriptions.
Also fixed issues in res_pjsip_registrar where it wasn't handling the
monitoring correctly when multiple registrations came in over the same
transport.
To accomplish this, the pjsip_transport_event feature needed to
be refactored to allow multiple monitors (multiple subcriptions or
registrations from the same endpoint) to exist on the same transport.
Since this changed the API, any external modules that may have used the
transport monitor feature (highly unlikey) will need to be changed.
ASTERISK-27612
Reported by: Ross Beer
Change-Id: Iee87cf4eb9b7b2b93d5739a72af52d6ca8fbbe36
The functionality of this module was already moved to
res_pjsip_registrar, mark it deprecated and add message to CHANGES.
Change-Id: I90c7d52c7e15e85fde3389d5eaccb05b97848813
pjproject does not have a function to reverse pjsip_inv_usage_init.
This means we need to ignore any calls to the functions once shutdown is
final.
ASTERISK-27571 #close
Change-Id: Ia550fcba563e2328f03162d79fb185f16b7c9b9d
We did this for TCP transports already but I'm not sure why we
didn't do it for TLS transports.
ASTERISK_27474 #not_final_fix
Change-Id: I5b1ef4b882f7b859e718236686b7898751dbb262
If any component of ast_config_AST_RECORDING_DIR is a symbolic link we
would incorrectly assume the ARI user was trying to escape the recording
path. Create additional check to check the recording directory's
realpath, only deny access if both do not match.
This is needed by the testsuite when run by 'run-local'.
Change-Id: I9145e841865edadcb5f75cead3471ad06bbb56c0
The type=identify endpoint identification method can match by IP address
and by SIP header. However, the SIP header matching has limited
usefulness because you cannot specify the SIP header matching priority
relative to the IP address matching. All the matching happens at the same
priority and the order of evaluating the identify sections is
indeterminate. e.g., If you had two type=identify sections where one
matches by IP address for endpoint alice and the other matches by SIP
header for endpoint bob then you couldn't predict which endpoint is
matched when a request comes in that matches both.
* Extract the SIP header matching criteria into its own "header" endpoint
identification method so the user can specify the relative priority of the
SIP header and the IP address matching criteria in the global
endpoint_identifier_order option. The "ip" endpoint identification method
now only matches by IP address.
ASTERISK-27491
Change-Id: I9df142a575b7e1e3471b7cda5d3ea156cef08095
The requirement that "ip" must be in the endpoint identify_by list to
allow the type=identify method to identify the endpoint is not necessary.
The "ip" identifier method can match one and only one endpoint. To even
work, the "ip" identifier method configuration must explicitly specify the
identified endpoint. Therefore, why bother configuring the type=identify
identifier in the first place? The requirement only adds the potential
for configuration errors for no benefit. Even worse, those configuration
errors cannot be detected when the configuration loads. The requirement
was introduced with the ASTERISK_27206 patch.
* Remove the code change that enforces the requiremnt. Listing the "ip"
method in the identify_by value is simply documentation.
Change-Id: Ia057f92a33fb5d9f51dc5d5692e3d5ee1a6f2c11
* Extracted sip_endpoint_identifier_type2str() and
sip_endpoint_identifier_str2type() to simplify the calling functions.
* Fixed pjsip_configuration.c:ident_to_str() building the endpoint's
identify_by value string.
Change-Id: Ide876768a8d5d828b12052e2a75008b0563fc509
The AMI PJSIPShowEndpoint action could only list one IdentifyDetail AMI
event per endpoint. However, there is no reason that multiple
type=identify sections cannot identify the same endpoint.
* Reworked format_ami_endpoint_identify() to generate as many
IdentifyDetail AMI events as there are matching identifiers.
Change-Id: Ie146792aef72d78e05416ab5b27bc552a30399db
In addition to being a micro-optimization (RAII_VAR has overhead), this
change improves output of REF_DEBUG. Unfortunately when RAII_VAR calls
ao2_cleanup it does so from a generated _dtor_varname function. For
example this caused _dtor_app to release a reference instead of
__stasis_app_unregister.
Change-Id: I4ce67120583a446babf9adeec678b71d37fcd9e5
Instead of searching for bridge_id provided in an argument this function
always searched for BRIDGE_ALL first. Rewrite this function to work
like the similar functions for channel and endpoint functions.
Change-Id: Ib5caca69e11727c5c8a7284a1d00621f40f1e60a
Some (normally optional) modules created notices, warnings, and even errors
in normal situations like (un)load. This cluttered the command-line interface
(CLI) on start and while stopping gracefully. However, when an user went for
the script './contrib/scripts/install_prereq', those modules get compiled-in
because their prerequisites were met at compile time. Furthermore, because of
ASTERISK_27475, the former talkative module 'res_curl' is built as side-effect.
ASTERISK-27553
Change-Id: I9f105f46d72553994e820679bfde3478a551b281
The ip_identify_apply() did not validate the configuration for simple
static configuration errors or deal well with address resolution errors.
* Added missing configuration validation checks.
* Fixed address resolution error handling.
* Demoted an error message to a warning since it does not fail applying
the identify object configuration.
Change-Id: I8b519607263fe88e8ce964f526a45359fd362b6e
If an endpoint identifier name in the endpoint_identifier_order list is a
prefix to the identifier we are registering, we could install it in the
wrong position of the list.
Assuming
endpoint_identifier_order=username,ip,anonymous
then registering the "ip_only" identifier would put the identifier in the
wrong position of the priority list.
* Fix incorrect strncmp() string prefix matching.
Change-Id: Ib8819ec4b811da8a27419fd93528c54d34f01484
The pjsip_msg_find_hdr function can return NULL. This patch adds a check
when searching for the sequence header to make sure a NULL pointer is never
de-referenced.
Change-Id: I19af23aeeded65be016be92360e8cb7ffe51fad2
Per RFC 5245, the foundation specified with an ICE candidate can be up
to 32 characters but we are only allowing for 31.
ASTERISK-27498 #close
Reported by: Michele Prà
Change-Id: I05ce7a5952721a76a2b4c90366168022558dc7cf
Those SIP messages that create dialogs require a contact header to be present.
If the contact header was missing from the message it could cause Asterisk to
crash.
This patch checks to make sure SIP messages that create a dialog contain the
contact header. If the message does not and it is required Asterisk now returns
a "400 Missing Contact header" response. Also added NULL checks when retrieving
the contact header that were missing as a "just in case".
ASTERISK-27480 #close
Change-Id: I1810db87683fc637a9e3e1384a746037fec20afe
Fix instances of:
* Retreive
* Recieve
* other then
* different then
* Repeated words ("the the", "an an", "and and", etc).
* othterwise, teh
ASTERISK-24198 #close
Change-Id: I3809a9c113b92fd9d0d9f9bac98e9c66dc8b2d31
When RTCP-MUX enabled. rtp->s is the same as rtcp->s, check this before
close the file descriptor. Close the FD twice will hangs the asterisk
under heavy load.
ASTERISK-27299 #close
Reported-by: Aaron An
Tested-by: AaronAn
Change-Id: I870a072d73fd207463ac116ef97100addbc0820a
Some variables are set and never changed, making them constant. This
means that code in the 'false' block of the conditional is unreachable.
In chan_skinny and res_config_ldap I used preprocessor directive `#if 0`
as I'm unsure if the unreachable code could be enabled in the future.
Change-Id: I62e2aac353d739fb3c983cf768933120f5fba059
Remove nearly all use of regex from ACO users. Still remaining:
* app_confbridge has a legitamate use of option name regex.
* ast_sorcery_object_fields_register is implemented with regex, all
callers use simple prefix based regex. I haven't decided the best
way to fix this in both 13/15 and master.
Change-Id: Ib5ed478218d8a661ace4d2eaaea98b59a897974b
When adding shutdown refs for OPTIONAL_API components I accidentally
added it to the unload_module function in res_smdi. Move it to
load_module.
Change-Id: I2b9da38fbc11ef78ea23dbb2df92b684be7f647c
res_hep_pjsip.so and res_hep_rtcp.so will still load and do a lot of
unnecessary work even if 'enabled' is set to 'no' in hep.conf.
Change-Id: I3eddfeea09c6b5bc7c641952ee0ae487fd09b64b
We should not do flood detection on video RTP streams. Video RTP streams
are very bursty by nature. They send out a burst of packets to update the
video frame then wait for the next video frame update. Really only audio
streams can be checked for flooding. The others are either bursty or
don't have a set rate.
* Added code to selectively disable packet flood detection for video RTP
streams.
ASTERISK-27440
Change-Id: I78031491a6e75c2d4b1e9c2462dc498fe9880a70
Reset the samples counter to zero when we are done playing an
announcement so that we don't skip into the middle of the first file in
the playlist.
Also add the selected annoucement to the output of 'moh show classes.'
ASTERISK-24329 #close
Reported by: Thomas Frederiksen
Change-Id: I2a5f986a31279c981592f49391409ebf38d6f6d0
When the RTCP code was transitioned over to Stasis a code change
was made to keep track of how many reports are present. This count
controlled where report blocks were placed in the RTCP report.
If a compound RTCP packet was received this logic would incorrectly
place a report block in the wrong location resulting in a write
to an invalid location.
This change removes this counting logic and always places the report
block at the first position. If in the future multiple reports are
supported the logic can be extended but for now keeping a count
serves no purpose.
ASTERISK-27382
ASTERISK-27429
Change-Id: Iad6c8a9985c4b608ef493e19c421211615485116
This patch does three things associated with the initial incoming INVITE
request URI.
1) Add access to the full initial incoming INVITE request URI.
2) We were not setting DNID on incoming PJSIP channels. The DNID is the
user portion of the initial incoming INVITE Request-URI. The value is
accessed by reading CALLERID(dnid).
3) Fix CHANNEL(pjsip,target_uri) documentation.
* The initial incoming INVITE request URI is now available using
CHANNEL(pjsip,request_uri).
* Set the DNID on PJSIP channel creation so CALLERID(dnid) can return the
initial incoming INVITE request URI user portion.
* CHANNEL(pjsip,target_uri) now correctly documents that the target URI is
the contact URI.
* Refactored print_escaped_uri() out of channel_read_pjsip() to handle
pjsip_uri_print() error condition when the buffer is too small.
ASTERISK-27478
Change-Id: I512e60d1f162395c946451becb37af3333337b33
Support for these protocols was added in the same commit as the 'proto'
field, so we can safely use the same ./configure check.
For reference: https://trac.pjsip.org/repos/changeset/4968
Change-Id: Icf4975d785d6bfb8f30ac7ffa695a0adf9382dac
Use the new ast_cli_completion_add() function to improve completion
performance for commands like 'pjsip show endpoint.'
Change-Id: I76d802294d2ac1766110dc75f7d117c8541ce348
Using the LIKE operator requires a full table scan of 'astdb', whereas a
comparison operation is able to use the primary key index.
This patch adds a new function to the AstDB API for quick prefix matches
and updates res_sorcery_astdb to utilize it. This showed substantial
performance improvement in my test environment.
Related to ASTERISK~26806, but does not completely resolve it.
Change-Id: I7d37f9ba2aea139dabf2ca72d31fbe34bd9b2fa1
There are many places in the code base where we ignore the return value
of fcntl() when getting/setting file descriptior flags. This patch
introduces a convenience function that allows setting or clearing file
descriptor flags and will also log an error on failure for later
analysis.
Change-Id: I8b81901e1b1bd537ca632567cdb408931c6eded7
res_stasis was missing AST_MODFLAG_LOAD_ORDER. Set res_stasis and
res_speech to start at (AST_MODPRI_APP_DEPEND - 1) so they are ready for
dependent modules.
Change-Id: I27f4f3810a95b6be8a5bfbf62be2ace6bfab6ff3
For both dynamic and static contacts it was possible that potential AOR
changes were not being applied to all contacts. This was because the qualify
and schedule code was only retrieving AOR's, and contacts with frequencies
greater than zero.
For instance the following could happen: and AOR/contact has a frequency of 5,
it then gets set to 0, and then a reload occurs. All scheduled OPTIONS are
stopped, a list of AOR's is retrieved with frequency > 0, but none are
selected since in this scenario all are 0. The contact for the one previously
set to 5 though does not get updated, so it's status remains "AVAILABLE".
This patch makes it so all contacts (static and dynamic) are selected, and
appropriately updated if need be.
ASTERISK-27467 #close
Change-Id: I7a920170f89c683af9505d4723a44fc6841decdb
Dynamic contacts were not being properly updated on reload. As a matter of
fact any changes to the AOR that a dynamic contact was associated with were
not being applied.
On reload, this patch makes it so for each dynamic contact, the associated
AOR is now retrieved and the AOR's fields are applied to the contact.
ASTERISK-27467
Change-Id: I8e3165dc6a745218c1c9db837f77fafa0516985d
The SuccessfulAuth using_password field was declared as a pointer to a
uint32_t when the field was later read as a uint32_t value. This resulted
in unnecessary casts and a non-portable field value reinterpret in
main/security_events.c:add_json_object(). i.e., It would work on a 32 bit
architecture but not on a 64 bit big endian architecture.
Change-Id: Ia08bc797613a62f07e5473425f9ccd8d77c80935
More complicated direct media reinvite negotiations can result in longer
delays before direct media flows. The strictrtp learning timeout time
was too short. One log showed that the first RTP packet came in just
after three seconds.
* Increase the strictrtp learning timeout time from 1.5 to 5 seconds.
ASTERISK-27453
Change-Id: Ic5e711164cbb91b4d1c1e40c83697755640f138c
This change makes the presence of the GMIME_MAJOR_VERSION
definition optional, as not all versions of gmime actually
define it.
ASTERISK-27454
Change-Id: I01d99590045971ed6787899147170a5954077238
The patch for ASTERISK_24560 inverted a test checking if the bridge name
is being updated to a different name.
* Fix the test to return "Changing bridge name is not implemented" when
someone attempts to change the bridge name.
ASTERISK-27445
Change-Id: I4b70bf08b0e02e016108b077ff75b345dec12fc9
Previously, Asterisk sent srflx only when configured exclusively for IPv4. Now,
srflx is gathered and sent via SDP, even when Asterisk is enabled for
Dual Stack (IPv4+IPv6) and an IPv4 interface is available/used.
ASTERISK-27437
Change-Id: Ie07d8e2bfa7b6fe06fcdc73d390a7a9a4d8c0bc1
res_parking has an implicit load_pri of 0 meaining it's one of the very
first modules loaded after modules with global symbols. Set it
explicitly in the AST_MODULE_INFO block.
Change-Id: I297b6fb3ff6993ec004e667b22a74f5925906259
Instead of specifying AST_MODFLAG_LOAD_ORDER with load_pri
AST_MODPRI_DEFAULT just use AST_MODFLAG_DEFAULT.
Change-Id: I0123258eafce324249433a69df15a85cc16e509f
res_mwi_external_ami specified AST_MODFLAG_LOAD_ORDER but didn't set
load_pri, resulting in an actual load priority of 0. This module only
provides AMI actions so it has no reason to load early.
Change-Id: I82987fcf10d3ea42716b2f9df915b16687fd5839
Mac doesn't like the comparison of -1 to an enum, so store the result of
ast_sip_str_to_dtmf to an int so we can check for the negative return
value. ast_sip_str_to_dtmf returns an int so this is only delaying the
implicit type cast.
Change-Id: I0c262c1719ee951aae1f437d733a301cf5f8ad29
Some net-snmp builds do not provide the RONLY declare, only
NETSNMP_OLDAPI_RONLY. Map RONLY to NETSNMP_OLDAPI_RONLY to get around
this error.
Change-Id: Ida5c7ad9406515825485c4d3b4a34fd6ad0da577
It's impossible for gwtimeout or fdtimeout to be less than 0 because
they are unsigned int's. Remove checks and unreachable branches.
Change-Id: Ib2286960621e6ee245e40013c84986143302bc78
Some clients do not send rtp packets every ptime ms. This can lead to
situations in which the rtp source learning algorithm will never learn
the address of the client. This has been discovered on a Mac mini with
a pjsip based softphone after updating to Sierra: as soon as USB
headsets are involved, the softphone will send the second packet 30ms
after the first, the third 30ms after the second and the fourth 1ms
after the third. So in the old implmentation the rtp source learning
algorithm was repeatedly reset on the fourth packet.
The patch changes the algorithm in a way that doesn't take the arrival
time between two consecutive packets into account but the time between
the first and the last packet of a learning sequence.
The patch also fixes a second problem: when a user was using a wrong
value for the probation setting there was a LOG_WARNING output stating
that the value had been set to the default value instead. However
the code for setting the value back to defaults was missing.
ASTERISK-27421 #close
Change-Id: If778fe07678a6fd2041eaca7cd78267d0ef4fc6c
Domains themselves can be up to 255 characters long (per RFC 1035), so
our current buffer sizes are wholly inadequate for many use cases.
Change-Id: If3f30a68307f1365a1fe06bc4b854c62842c9292
We were not \0 terminating this string, so any attempt to print it would
in the best case show an empty string and in the worst case potentially
crash.
Change-Id: I63d96ef8f7516ac02a0f91e22dfa8acdc615042c
Joshua Elson
George Joseph
Jenkins2
Corey Farrell
Richard Mudgett
Sean Bright
Alexander Traud
Joshua Colp
Kevin Harwell
Aaron An
Pirmin Walthert