33400 Commits (116ec0b9bbbb95cf238cb477a9f8f044e2bc1060)

 

All Branches   

Search

Author	SHA1	Message	Date
Naveen Albert	116ec0b9bb	cli: Prevent assertions on startup from bad ao2 refs. ... If "core show channels" is run before startup has completed, it is possible for bad ao2 refs to occur because the system is not yet fully initialized. This will lead to an assertion failing. To prevent this, initialization of CLI builtins is moved to be later along in the main load sequence. Core CLI commands are loaded at the same time, but channel-related commands are loaded later on. ASTERISK-29846 #close Change-Id: If6b3cde802876bd738c1b4cf2683bea6ddc615b6	3 years ago
Joshua C. Colp	03bda8845c	pjsip: Add TLS transport reload support for certificate and key. ... This change adds support using the pjsip_tls_transport_restart function for reloading the TLS certificate and key, if the filenames remain unchanged. This is useful for Let's Encrypt and other situations. Note that no restart of the transport will occur if the certificate and key remain unchanged. ASTERISK-30186 Change-Id: I9bc95a6bf791830a9491ad9fa43c17d4010028d0	3 years ago
Naveen Albert	5f712c0060	res_tonedetect: Fix typos referring to wrong variables. ... Fixes two typos that cause fax detection to not work. One refers to the wrong frame variable, and the other refers to the subclass.integer instead of the frametype as it should. ASTERISK-30192 #close Change-Id: I7b35fdb7bcf25a29a212eee37c20812c64ab3ef1	3 years ago
Mike Bradeen	b6c953dcf7	alembic: add missing ps_endpoints columns ... The following required columns were missing, now added to the ps_endpoints table: incoming_call_offer_pref outgoing_call_offer_pref stir_shaken_profile ASTERISK-29453 Change-Id: I5cf565edf30195844d6acbc1e1de8c5f0d837568	3 years ago
Sean Bright	ddc6d1f796	chan_dahdi.c: Resolve a format-truncation build warning. ... With gcc (Ubuntu 11.2.0-19ubuntu1) 11.2.0: > chan_dahdi.c:4129:18: error: ‘%s’ directive output may be truncated > writing up to 255 bytes into a region of size between 242 and 252 > [-Werror=format-truncation=] This removes the error-prone sizeof(...) calculations in favor of just doubling the size of the base buffer. Change-Id: I2d276785286730d3d5d0a921bcea2e065dbf27c5	3 years ago
Alexei Gradinari	9eadb789d5	res_pjsip_pubsub: Postpone destruction of old subscriptions on RLS update ... Set termination state to old subscriptions to prevent queueing and sending NOTIFY messages on exten/device state changes. Postpone destruction of old subscriptions until all already queued tasks that may be using old subscriptions have completed. ASTERISK-29906 Change-Id: I96582aad3a26515ca73a8460ee6756f56f6ba23b	3 years ago
Sean Bright	217766b706	channel.h: Remove redundant declaration. ... The DECLARE_STRINGFIELD_SETTERS_FOR() declares ast_channel_name_set() for us, so no need to declare it separately. Change-Id: I4813a884ada475ddc62bca480bceb4a53b3ec59a	3 years ago
Naveen Albert	a5d5c3a92c	features: Add transfer initiation options. ... Adds additional control options over the transfer feature functionality to give users more control in how the transfer feature sounds and works. First, the "transfer" sound that plays when a transfer is initiated can now be customized by the user in features.conf, just as with the other transfer sounds. Secondly, the user can now specify the transfer extension in advance by using the TRANSFER_EXTEN variable. If a valid extension is contained in this variable, the call will automatically be transferred to this destination. Otherwise, it will fall back to collecting the extension from the user as is always done now. ASTERISK-29899 #close Change-Id: Ibff309caa459a2b958706f2ed0ca393b1ef502e3	3 years ago
Mike Bradeen	1390a247a6	CI: Fixing path issue on venv check ... ASTERISK-26826 Change-Id: I07388d16f74452cebc9c981f99044eb6b77df792	3 years ago
Mike Bradeen	f22516a4ac	CI: use Python3 virtual environment ... Requires Python3 testsuite changes ASTERISK-26826 Change-Id: I92ec7dec751ad455503a584d6e860db88c56d6bc	3 years ago
Naveen Albert	409cc1f36e	general: Very minor coding guideline fixes. ... Fixes a few coding guideline violations: * Use of C99 comments * Opening brace on same line as function prototype ASTERISK-30163 #close Change-Id: I07771c4c89facd41ce8d323859f022ddbddf6ca7	3 years ago
Asterisk Development Team	c40b0134ce	Update CHANGES and UPGRADE.txt for 19.6.0	3 years ago
George Joseph	4846dd5d18	res_geolocation: Address user issues, remove complexity, plug leaks ... * Added processing for the 'confidence' element. * Added documentation to some APIs. * removed a lot of complex code related to the very-off-nominal case of needing to process multiple location info sources. * Create a new 'ast_geoloc_eprofile_to_pidf' API that just takes one eprofile instead of a datastore of multiples. * Plugged a huge leak in XML processing that arose from insufficient documentation by the libxml/libxslt authors. * Refactored stylesheets to be more efficient. * Renamed 'profile_action' to 'profile_precedence' to better reflect it's purpose. * Added the config option for 'allow_routing_use' which sets the value of the 'Geolocation-Routing' header. * Removed the GeolocProfileCreate and GeolocProfileDelete dialplan apps. * Changed the GEOLOC_PROFILE dialplan function as follows: * Removed the 'profile' argument. * Automatically create a profile if it doesn't exist. * Delete a profile if 'inheritable' is set to no. * Fixed various bugs and leaks * Updated Asterisk WiKi documentation. ASTERISK-30167 Change-Id: If38c23f26228e96165be161c2f5e849cb8e16fa0	3 years ago
Naveen Albert	bb7ffce381	chan_iax2: Add missing options documentation. ... Adds missing dial resource option documentation. ASTERISK-30164 #close Change-Id: I674e1fc9b1e5d67a20599bd4b418ce294d48fc83	3 years ago
Naveen Albert	ba5febd14c	app_confbridge: Fix memory leak on updated menu options. ... If the CONFBRIDGE function is used to dynamically set menu options, a memory leak occurs when a menu option that has been set is overridden, since the menu entry is not destroyed before being freed. This ensures that it is. Additionally, logic that duplicates the destroy function is removed in lieu of the destroy function itself. ASTERISK-28422 #close Change-Id: I71cfb5c24e636984d41086d1333a416dc12ff995	3 years ago
George Joseph	df4ba41731	Geolocation: Wiki Documentation ... Change-Id: I68ba22db0a69d9e2eabcc2141b48a2395f7f1a23	3 years ago
Naveen Albert	d09ccb17ce	manager: Remove documentation for nonexistent action. ... The manager XML documentation documents a "FilterList" action, but there is no such action. Therefore, this can lead to confusion when people try to use a documented action that does not, in fact, exist. This is removed as the action never did exist in the past, nor would it be trivial to add since we only store the regex_t objects, so the filter list can't actually be provided without storing that separately. Most likely, the documentation was originally added (around version 10) in anticipation of something that never happened. ASTERISK-29917 #close Change-Id: I846b16fd6f80a91d4ddc5d8a861b522d7c6f8f97	3 years ago
Naveen Albert	eccc4593b0	app_confbridge: Add missing AMI documentation. ... Documents the ConfbridgeListRooms AMI response, which is currently not documented. ASTERISK-30020 #close Change-Id: Id6fff7a936244bae7b52686301eb740c1169cdea	4 years ago
Naveen Albert	890cbf4293	general: Improve logging levels of some log messages. ... Adjusts some logging levels to be more or less important, that is more prominent when actual problems occur and less prominent for less noteworthy things. ASTERISK-30153 #close Change-Id: Ifc8f7df427aa018627db462125ae744986d3261b	4 years ago
Naveen Albert	865582f582	cdr.conf: Remove obsolete app_mysql reference. ... The CDR sample config still mentions that app_mysql is available in the addons directory, but this is incorrect as it was removed as of 19. This removes that to avoid confusion. ASTERISK-30160 #close Change-Id: Ie5293ccb4f2b365896981811b480544e67bb9cd7	4 years ago
Naveen Albert	9be41593f0	general: Remove obsolete SVN references. ... There are a handful of files in the tree that reference an SVN link for the coding guidelines. This removes these because the links are dead and the vast majority of source files do not contain these links, so this is more consistent. app_skel still maintains an (up to date) link to the coding guidelines. ASTERISK-30159 #close Change-Id: I35bbb20f66982e98099cff3029ede20091ffdac7	4 years ago
Naveen Albert	eb316354a9	app_meetme: Add missing AMI documentation. ... The MeetmeList and MeetmeListRooms AMI responses are currently completely undocumented. This adds documentation for these responses. ASTERISK-30018 #close Change-Id: Id93135b7edf01de6f8fba266e2122989dc8996b8	4 years ago
Naveen Albert	419932691b	func_srv: Document field parameter. ... Adds missing documentation for the field parameter for the SRVRESULT function. ASTERISK-30151 Reported by: Chris Young Change-Id: I4385a2e0892a07e30dea1a8a0588e2c1bea2b1f1	4 years ago
Asterisk Development Team	3814cf5703	Update CHANGES and UPGRADE.txt for 19.6.0	4 years ago
Naveen Albert	f6c3c7d8f8	pbx_functions.c: Manually update ast_str strlen. ... When ast_func_read2 is used to read a function using its read function (as opposed to a native ast_str read2 function), the result is copied directly by the function into the ast_str buffer. As a result, the ast_str length remains initialized to 0, which is a bug because this is not the real string length. This can cascade and have issues elsewhere, such as when reading substrings of functions that only register read as opposed to read2 callbacks. In this case, since reading ast_str_strlen returns 0, the returned substring is empty as opposed to the actual substring. This has caused the ast_str family of functions to behave inconsistently and erroneously, in contrast to the pbx_variables substitution functions which work correctly. This fixes this issue by manually updating the ast_str length when the result is copied directly into the ast_str buffer. Additionally, an assertion and a unit test that previously exposed these issues are added, now that the issue is fixed. ASTERISK-29966 #close Change-Id: I4e2dba41410f9d4dff61c995d2ca27718248e07f	4 years ago
Sergey V. Lobanov	085b71ccad	build: fix bininstall launchd issue on cross-platform build ... configure script detects /sbin/launchd, but the result of this check is not used in Makefile (bininstall). Makefile also detects /sbin/launchd file to decide if it is required to install safe_asterisk. configure script correctly detects cross compile build and sets PBX_LAUNCHD=0 In case of building asterisk on MacOS host for Linux target using external toolchain (e.g. OpenWrt toolchain), bininstall does not install safe_asterisk (due to /sbin/launchd detection in Makefile), but it is required on target (Linux). This patch adds HAVE_SBIN_LAUNCHD=@PBX_LAUNCHD@ to makeopts.in to use the result of /sbin/launchd detection from configure script in Makefile. Also this patch uses HAVE_SBIN_LAUNCHD in Makefile (bininstall) to decide if it is required to install safe_asterisk. ASTERISK-29905 #close Change-Id: Iff61217276cd188f43f51ef4cdbffe39d9f07f65	4 years ago
Naveen Albert	f7e39e2eca	db: Add AMI action to retrieve DB keys at prefix. ... Adds the DBGetTree action, which can be used to retrieve all of the DB keys beginning with a particular prefix, similar to the capability provided by the database show CLI command. ASTERISK-30136 #close Change-Id: I3be9425e53be71f24303fdd4d2923c14e84337e6	4 years ago
Naveen Albert	3b05eee506	manager: Fix incomplete filtering of AMI events. ... The global event filtering code was only in one possible execution path, so not all events were being properly filtered out if requested. This moves that into the universal AMI handling code so all events are properly handled. Additionally, the CLI listing of disabled events can also get truncated, so we now print out everything. ASTERISK-30137 #close Change-Id: If8c42edcb2abc5158552da7eba2a8ff6b20e1959	4 years ago
Michael Neuhauser	477f6ec887	res_pjsip: delay contact pruning on Asterisk start ... Move the call to ast_sip_location_prune_boot_contacts() *after* the call to ast_res_pjsip_init_options_handling() so that res/res_pjsip/pjsip_options.c is informed about the contact deletion and updates its sip_options_contact_statuses list. This allows for an AMI event to be sent by res/res_pjsip/pjsip_options.c if the endpoint registers again from the same remote address and port (i.e., same URI) as used before the Asterisk restart. ASTERISK-30109 Reported-by: Michael Neuhauser Change-Id: I1ba4478019e4931a7085f62708d9b66837e901a8	4 years ago
Sam Banks	35bb9c0970	queues.conf.sample: Correction of typo ... ASTERISK-30126 #close Change-Id: I009c4dcbf9338a13e3baf87b52a5bbe4f9f81a42	4 years ago
Naveen Albert	0bd21cc88f	chan_dahdi: Add POLARITY function. ... Adds a POLARITY function which can be used to retrieve the current polarity of an FXS channel as well as set the polarity of an FXS channel to idle or reverse at any point during a call. ASTERISK-30000 #close Change-Id: If6f50998f723e4484bf68e2473f5cedfeaf9b8f1	4 years ago
Naveen Albert	d2746b6e99	chan_dahdi: Fix buggy and missing Caller ID parameters ... There are several things wrong with analog Caller ID handling that are fixed by this commit: callerid.c's Caller ID generation function contains the logic to use the presentation to properly send the proper Caller ID. However, currently, DAHDI does not pass any presentation information to the Caller ID module, which means that presentation is completely ignored on all calls. This means that lines could be getting Caller ID information they aren't supposed to. Part of the reason this has been obscured is because the simple switch logic for handling the built in *67 and *82 is completely wrong. Rather than modifying the presentation for the call accordingly (which is what it's supposed to do), it simply blanks out the Caller ID or fills it in. This is wrong, so wrong that it makes a mockery of the specification. Additionally, it would leave to the "UNAVAILABLE" disposition being used for Caller ID generation as opposed to the "PRIVATE" disposition that it should have been using. This is now fixed to only update the presentation and not modify the number and name, so that the simple switch *67/*82 work correctly. Next, sig_analog currently only copies over the name and number, nothing else, when it is filling in a duplicated caller id structure. Thus, we also now copy over the presentation information so that is available for the Caller ID spill. Additionally, this meant that "valid" was implicitly 0, and as such presentation would always fail to "Unavailable". The validity is therefore also copied over so it can be used by ast_party_id_presentation. As part of this fix, new API is added so that all the relevant Caller ID information can be passed in to the Caller ID generation functions. Parameters that are also completely missing from the Caller ID spill have also been added, to enhance the compatibility, correctness, and completeness of the Asterisk Caller ID implementation. ASTERISK-29991 #close Change-Id: Icc44a5e09979916f4c18a440f96e10dc1c76ae15	4 years ago
Mike Bradeen	ba51a05a6f	Makefile: Avoid git-make user conflict ... make_version now silently checks if the required git commands will fail. If they do, then return UNKNOWN__git_check_fail to distinguish this failure from other UNKNOWN__ version failures Makefile checks for this value on install and exits out with instructions ASTERISK-30029 Change-Id: If8f10cac8f509c08981120f17555762342020221	4 years ago
Naveen Albert	6f9d07ecb9	app_confbridge: Always set minimum video update interval. ... Currently, if multiple video-enabled ConfBridges are conferenced together, we immediately get into a scenario where an infinite sequence of video updates fills up the taskprocessor queue and causes memory consumption to climb unabated until Asterisk is killed. This is due to the core bridging mechanism that provides video updates (softmix_bridge_write_control in bridge_softmix.c) continously updating all the channels in the bridge with video updates. The logic to do so in the core is that the video updates should be provided if the video_update_discard property for the bridge is 0, or if enough time has elapsed since the last video update. Thus, we already have a safeguard built in to ensure the scenario described above does not happen. Currently, however, this safeguard is not being adequately ensured. In app_confbridge, the video_update_discard property defaults to 2000, which is a healthy value that should completely prevent this issue. However, this value is only set onto the bridge in the SFU video mode. This leaves video modes such as follow_talker completely vulnerable, since video_update_discard will actually be 0, since the default or set value was never applied. As a result, the core bridging mechanism will always try to provide video updates regardless of when the last one was sent. To prevent this issue from happening, we now always set the video_update_discard property on the bridge with the value from the bridge profile. The app_confbridge defaults will thus ensure that infinite video updates no longer happen in any video mode. ASTERISK-29907 #close Change-Id: I4accb2536ac62797950468e9930f12ef7dd486b2	4 years ago
Sean Bright	fbd84f9e74	pbx.c: Simplify ast_context memory management. ... Allocate all of the ast_context's character data in the structure's flexible array member and eliminate the clunky fake_context. This will simplify future changes to ast_context. Change-Id: I98357de75d8ac2b3c4c9f201223632e6901021ea	4 years ago
George Joseph	6163de3295	geoloc_eprofile.c: Fix setting of loc_src in set_loc_src() ... line 196: loc_src = '\0'; should have been line 196: *loc_src = '\0'; The issue was caught by the gcc optimizer complaining that loc_src had a zero length because the pointer itself was being set to NULL instead of the _contents_ of the pointer being set to the NULL terminator. ASTERISK-30138 Reported-by: Sean Bright Change-Id: Id247be113cc8510f043ca053d5b4f5f3d32acd29	4 years ago
George Joseph	6c2f4d57a3	Geolocation: chan_pjsip Capability Preview ... This commit adds res_pjsip_geolocation which gives chan_pjsip the ability to use the core geolocation capabilities. This commit message is intentionally short because this isn't a simple capability. See the documentation at https://wiki.asterisk.org/wiki/display/AST/Geolocation for more information. THE CAPABILITIES IMPLEMENTED HERE MAY CHANGE BASED ON USER FEEDBACK! ASTERISK-30128 Change-Id: Ie2e2bcd87243c2cfabc43eb823d4427c7086f4d9	4 years ago
George Joseph	abacf2d1a4	Geolocation: Core Capability Preview ... This commit adds res_geolocation which creates the core capabilities to manipulate Geolocation information on SIP INVITEs. An upcoming commit will add res_pjsip_geolocation which will allow the capabilities to be used with the pjsip channel driver. This commit message is intentionally short because this isn't a simple capability. See the documentation at https://wiki.asterisk.org/wiki/display/AST/Geolocation for more information. THE CAPABILITIES IMPLEMENTED HERE MAY CHANGE BASED ON USER FEEDBACK! ASTERISK-30127 Change-Id: Ibfde963121b1ecf57fd98ee7060c4f0808416303	4 years ago
Naveen Albert	7448443f21	general: Fix various typos. ... ASTERISK-30089 #close Change-Id: I1f5db911fd05a3a211c522c13e990fa1d0e62275	4 years ago
Kevin Harwell	b7599a380d	cel_odbc & res_config_odbc: Add support for SQL_DATETIME field type ... See also: ASTERISK_30023 ASTERISK-30096 #close patches: inline on issue - submitted by Morvai Szabolcs Change-Id: I79c0b74862100acd9c8319dca5cc456a654d02eb	4 years ago
Naveen Albert	f6cac9d0ab	chan_iax2: Allow compiling without OpenSSL. ... ASTERISK_30007 accidentally made OpenSSL a required depdendency. This adds an ifdef so the relevant code is compiled only if OpenSSL is available, since it only needs to be executed if OpenSSL is available anyways. ASTERISK-30083 #close Change-Id: Iad05c1a9a8bd2a48e7edf8d234eaa9f80779e34d	4 years ago
Joshua C. Colp	311e3e11e2	websocket / aeap: Handle poll() interruptions better. ... A sporadic test failure was happening when executing the AEAP Websocket transport tests. It was originally thought this was due to things not getting cleaned up fast enough, but upon further investigation I determined the underlying cause was poll() getting interrupted and this not being handled in all places. This change adds EINTR and EAGAIN handling to the Websocket client connect code as well as the AEAP Websocket transport code. If either occur then the code will just go back to waiting for data. The originally disabled failure test case has also been re-enabled. ASTERISK-30099 Change-Id: I1711a331ecf5d35cd542911dc6aaa9acf1e172ad	4 years ago
Naveen Albert	daa81f6359	res_cliexec: Add dialplan exec CLI command. ... Adds a CLI command similar to "dialplan eval function" except for applications: "dialplan exec application", useful for quickly testing certain application behavior directly from the CLI without writing any dialplan. ASTERISK-30062 #close Change-Id: I42e9fa9b60746c21450d40f99a026d48d2486dde	4 years ago
Trevor Peirce	a19fc264b4	features: Update documentation for automon and automixmon ... The current documentation is out of date and does not reflect actual behaviour. This change makes documentation clearer and accurately reflect the purpose of relevant channel variables. ASTERISK-30123 Change-Id: I160d0b01fce862477ad55ac1aa708a730473eb6f	4 years ago
George Joseph	104e53aecd	Geolocation: Base Asterisk Prereqs ... * Added ast_variable_list_from_quoted_string() Parse a quoted string into an ast_variable list. * Added ast_str_substitute_variables_full2() Perform variable/function/expression substitution on an ast_str. * Added ast_strsep_quoted() Like ast_strsep except you can specify a specific quote character. Also added unit test. * Added ast_xml_find_child_element() Find a direct child element by name. * Added ast_xml_doc_dump_memory() Dump the specified document to a buffer * ast_datastore_free() now checks for a NULL datastore before attempting to destroy it. Change-Id: I5dcefed2f5f93a109e8b489e18d80d42e45244ec	4 years ago
Boris P. Korzun	a692e79ec6	pbx_lua: Remove compiler warnings ... Improved variable definitions (specified correct type) for avoiding compiler warnings. ASTERISK-30117 #close Change-Id: I3b00c1befb658ee9379ddabd9a9132765ca9201a	4 years ago
Jose Lopes	71adb35c00	res_pjsip_header_funcs: Add functions PJSIP_RESPONSE_HEADER and PJSIP_RESPONSE_HEADERS ... These new functions allow retrieving information from headers on 200 OK INVITE response. ASTERISK-29999 Change-Id: I264a610a9333359297a0825feb29a1bb4f4ad144	4 years ago
Boris P. Korzun	cd9b332118	res_prometheus: Optional load res_pjsip_outbound_registration.so ... Switched res_pjsip_outbound_registration.so dep to optional. Added module loaded check before using it. ASTERISK-30101 #close Change-Id: Ia34f1684d984e821fbdd4de8911f930337703666	4 years ago
Naveen Albert	2619350741	app_dial: Fix dial status regression. ... ASTERISK_28638 caused a regression by incorrectly aborting early and overwriting the status on certain calls. This was exhibited by certain technologies such as DAHDI, where DAHDI returns NULL for the request if a line is busy. This caused the BUSY condition to be incorrectly treated as CHANUNAVAIL because the DIALSTATUS was getting incorrectly overwritten and call handling was aborted early. This is fixed by instead checking if any valid peers have been specified, as opposed to checking the list size of successful requests. This is because the latter could be empty but this does not indicate any kind of problem. This restores the previous working behavior. ASTERISK-29989 #close Change-Id: I4d4b209b967816b1bc791534593ababa2b99bb88	4 years ago
Naveen Albert	d0ee3652be	res_calendar_icalendar: Send user agent in request. ... Microsoft recently began rejecting all requests for ICS calendars on Office 365 with 400 errors if the request doesn't contain a user agent. See: https://docs.microsoft.com/en-us/answers/questions/883904/34the-remote-server-returned-an-error-400-bad-requ.html Accordingly, we now send a user agent on requests for ICS files so that requests to Office 365 will work as they did before. ASTERISK-30106 Change-Id: Ie9dcaef12ae8adf37533c684499eb11005fac8f7	4 years ago