* Do a git blame on the embedded XML managerEvent elements.
* From the commit hash, grab the summary line.
* Do a git log --grep <summary> to find the cherry-pick commits in all
branches that match.
* Do a git patch-id to ensure the commits are all related and didn't get
a false match on the summary.
* Do a git tag --contains <commit> to find the tags that contain each
commit.
* Weed out all tags not ..0.
* Sort and discard any .0.0 and following tags where the commit
appeared in an earlier branch.
* The result is a single tag for each branch where the application or function
was defined.
The events defined in res/res_pjsip/pjsip_manager.xml were done by hand
because the XML was extracted from the C source file relatively recently.
Two bugs were fixed along the way...
* The get_documentation awk script was exiting after it processed the first
DOCUMENTATION block it found in a file. We have at least 1 source file
with multiple DOCUMENTATION blocks so only the first one in them was being
processed. The awk script was changed to continue searching rather
than exiting after the first block.
* Fixing the awk script revealed an issue in logger.c where the third
DOCUMENTATION block contained a XML fragment that consisted only of
a managerEventInstance element that wasn't wrapped in a managerEvent
element. Since logger_doc.xml already existed, the remaining fragments
in logger.c were moved to it and properly organized.
The `get_documentation` awk script will only extract the first
DOCUMENTATION block that it finds in a given file. This is by design
(9bc2127) to prevent AMI event documentation from being pulled in to
the core.xml documentation file.
Because of this, the `LOG_GROUP` documentation added in 89709e2 was
not being properly extracted and was missing fom the resulting XML
documentation file. This commit moves the `LOG_GROUP` documentation to
a separate `logger.xml` file.
This adds the ability to filter console
logging by channel or groups of channels.
This can be useful on busy systems where
an administrator would like to analyze certain
calls in detail. A dialplan function is also
included for the purpose of assigning a channel
to a group (e.g. by tenant, or some other metric).
ASTERISK-30483 #close
Resolves: #242
UserNote: The console log can now be filtered by
channels or groups of channels, using the
logger filter CLI commands.
MUSL defines BUFSIZ as 1024 which is not reasonable for log messages.
More broadly, BUFSIZ is the amount of buffering stdio.h does, which
is arbitrary and largely orthogonal to what logging should accept
as the maximum message size.
ASTERISK-29928
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Change-Id: Iaa49fbbab029c64ae3d95e4b18270e0442cce170
Adds missing documentation for some channel,
bridge, and queue events.
ASTERISK-24427
ASTERISK-29515
Change-Id: I92b06b88c8cadc0155f95ebe3e870b3e795a8c64
* Initialize some variables that are never used anyway.
* Use valid pointers instead of integers cast to void pointers when
calling pthread_setspecific().
ASTERISK-29711 #close
ASTERISK-29713 #close
Change-Id: I8728cd6f2f4b28e0e48113c5da450b768c2a6683
Adds the ability for users to log to custom log levels
by providing custom log level names in logger.conf. Also
adds a logger show levels CLI command.
ASTERISK-29529
Change-Id: If082703cf81a436ae5a565c75225fa8c0554b702
The 'core' console (ie: asterisk -c) does read logger.conf and does
use the dateformat= option.
Whereas 'remote' consoles (ie: asterisk -r -T) does not read logger.conf
and uses a hard coded dateformat option for printing received verbose messages:
main/logger.c: static char dateformat[256] = "%b %e %T"
This change will load logger.conf for each remote console session and
use the dateformat= option to set the per-line timestamp for verbose messages
Change-Id: I3ea10990dbd920e9f7ce8ff771bc65aa7f4ea8c1
ASTERISK-25358: #close
Reported-by: Igor Liferenko
Scope tracing allows you to not specify a format string or variable,
in which case it just prints the indent, file, function, and line
number. The trace output automatically adds a newline to the end
in this case. If you also have debugging turned on for the module,
a debug message is also printed but the standard log functionality
which prints it doesn't add the newline so you have messages
that don't break correctly.
* format_log_message_ap(), which is the common log
message formatter for all channels, now adds a
newline to the end of format strings that don't
already have a newline.
ASTERISK-29209
Reported by: Alexander Traud
Change-Id: I994a7df27f88df343b7d19f3e81a4b562d9d41da
Added debug logging categories that allow a user to output debug
information based on a specified category. This lets the user limit,
and filter debug output to data relevant to a particular context,
or topic. For instance the following categories are now available for
debug logging purposes:
dtls, dtls_packet, ice, rtcp, rtcp_packet, rtp, rtp_packet,
stun, stun_packet
These debug categories can be enable/disable via an Asterisk CLI command.
While this overrides, and outputs debug data, core system debugging is
not affected by this patch. Statements still output at their appropriate
debug level. As well backwards compatibility has been maintained with
past debug groups that could be enabled using the CLI (e.g. rtpdebug,
stundebug, etc.).
ASTERISK-29054 #close
Change-Id: I6e6cb247bb1f01dbf34750b2cd98e5b5b41a1849
Added a new log formatter called "plain" that always prints
file, function and line number if available (even for verbose
messages) and never prints color control characters. It also
doesn't apply any special formatting for verbose messages.
Most suitable for file output but can be used for other channels
as well.
You use it in logger.conf like so:
debug => [plain]debug
console => [plain]error,warning,debug,notice,pjsip_history
messages => [plain]warning,error,verbose
Change-Id: I4fdfe4089f66ce2f9cb29f3005522090dbb5243d
Tracing through synchronous tasks was a little troublesome because
the new thread's stack counter reset to 0. This change allows
a synchronous task to set its trace level to be the same as the
thread that pushed the task. For now, the task's level has to be
passed in the task's data structure but a future enhancement to the
taskprocessor subsystem could automatically set the trace level
of the servant to be that of the caller.
This doesn't really make sense for async tasks because you never
know when they're going to run anyway.
Change-Id: Ib8049c0b815063a45d8c7b0cb4e30b7b87b1d825
This patch fixes a few compile warnings/errors that now occur when using gcc
10+.
Also, the Makefile.rules check to turn off partial inlining in gcc versions
greater or equal to 8.2.1 had a bug where it only it only checked against
versions with at least 3 numbers (ex: 8.2.1 vs 10). This patch now ensures
any version above the specified version is correctly compared.
Change-Id: I54718496eb0c3ce5bd6d427cd279a29e8d2825f9
What's wrong with ast_debug?
ast_debug is fine for general purpose debug output but it's not
really geared for scope tracing since it doesn't present its
output in a way that makes capturing and analyzing flow through
Asterisk easy.
How is scope tracing better?
Scope tracing uses the same "cleanup" attribute that RAII_VAR
uses to print messages to a separate "trace" log level. Even
better, the messages are indented and unindented based on a
thread-local call depth counter. When output to a separate log
file, the output is uncluttered and easy to follow.
Here's an example of the output. The leading timestamps and
thread ids are removed and the output cut off at 68 columns for
commit message restrictions but you get the idea.
--> res_pjsip_session.c:3680 handle_incoming PJSIP/1173-00000001
--> res_pjsip_session.c:3661 handle_incoming_response PJSIP/1173
--> res_pjsip_session.c:3669 handle_incoming_response PJSIP/
--> chan_pjsip.c:3265 chan_pjsip_incoming_response_after
--> chan_pjsip.c:3194 chan_pjsip_incoming_response P
chan_pjsip.c:3245 chan_pjsip_incoming_respon
<-- chan_pjsip.c:3194 chan_pjsip_incoming_response P
<-- chan_pjsip.c:3265 chan_pjsip_incoming_response_after
<-- res_pjsip_session.c:3669 handle_incoming_response PJSIP/
<-- res_pjsip_session.c:3661 handle_incoming_response PJSIP/1173
<-- res_pjsip_session.c:3680 handle_incoming PJSIP/1173-00000001
The messages with the "-->" or "<--" were produced by including
the following at the top of each function:
SCOPE_TRACE(1, "%s\n", ast_sip_session_get_name(session));
Scope isn't limited to functions any more than RAII_VAR is. You
can also see entry and exit from "if", "for", "while", etc blocks.
There is also an ast_trace() macro that doesn't track entry or
exit but simply outputs a message to the trace log using the
current indent level. The deepest message in the sample
(chan_pjsip.c:3245) was used to indicate which "case" in a
"select" was executed.
How do you use it?
More documentation is available in logger.h but here's an overview:
* Configure with --enable-dev-mode. Like debug, scope tracing
is #ifdef'd out if devmode isn't enabled.
* Add a SCOPE_TRACE() call to the top of your function.
* Set a logger channel in logger.conf to output the "trace" level.
* Use the CLI (or cli.conf) to set a trace level similar to setting
debug level... CLI> core set trace 2 res_pjsip.so
Summary Of Changes:
* Added LOG_TRACE logger level. Actually it occupies the slot
formerly occupied by the now defunct "event" level.
* Added core asterisk option "trace" similar to debug. Includes
ability to specify global trace level in asterisk.conf and CLI
commands to turn on/off and set levels. Levels can be set
globally (probably not a good idea), or by module/source file.
* Updated sample asterisk.conf and logger.conf. Tracing is
disabled by default in both.
* Added __ast_trace() to logger.c which keeps track of the indent
level using TLS. It's #ifdef'd out if devmode isn't enabled.
* Added ast_trace() and SCOPE_TRACE() macros to logger.h.
These are all #ifdef'd out if devmode isn't enabled.
Why not use gcc's -finstrument-functions capability?
gcc's facility doesn't allow access to local data and doesn't
operate on non-function scopes.
Known Issues:
The only know issue is that we currently don't know the line
number where the scope exited. It's reported as the same place
the scope was entered. There's probably a way to get around it
but it might involve looking at the stack and doing an 'addr2line'
to get the line number. Kind of like ast_backtrace() does.
Not sure if it's worth it.
Change-Id: Ic5ebb859883f9c10a08c5630802de33500cad027
We've been seeing crashes in libbfd when we attempt to generate
a stack trace from multiple threads. It turns out that libbfd
is NOT thread-safe. It can cache the bfd structure and give it to
multiple threads without protecting itself. To get around this,
we've added a global mutex around the bfd functions and also have
refactored the use of those functions to be more efficient and
to provide more information about inlined functions.
Also added a few more tests to test_pbx.c. One just calls
ast_assert() and the other calls ast_log_backtrace(). Neither are
run by default.
WARNING: This change necessitated changing the return value of
ast_bt_get_symbols() from an array of strings to a VECTOR of
strings. However, the use of this function outside Asterisk is not
likely.
ASTERISK-28140
Change-Id: I79d02862ddaa2423a0809caa4b3b85c128131621
Default logging was not setup correctly when there was no logger.conf.
This resulted in many expected log messages not actually getting out to
the console.
Change-Id: I542e61c03b2f630ff5327f9de5641d776c6fa70c
* Display list of unavailable dependencies when they cause another
module to fail loading.
* When a module declines to load find all modules which depend on it so
they can be declined and listed together.
* Prevent retry of declined modules during startup.
* When a module fails to dlopen try loading it with RTLD_LAZY so we can
attempt to display the list of missing dependencies.
These changes are meant to reduce logger spam that is caused when a
module has many dependencies and declines to load. This also fixes some
error paths which failed to recognize required modules.
Module load/start errors are delayed until the end of loader startup.
Change-Id: I046052c71331c556c09d39f47a3b92975f3e1758
With the new module loader it was missed that built-in modules never
parsed dependencies from mod->info into vectors of mod. This caused
manager to be initialized before acl (named_acl). If manager.conf
used any named ACL's they would not be found and result in no ACL being
applied to the AMI user.
In addition to the manager ACL fix this adds "extconfig" to all builtin
modules which support realtime configuration. This only matters if one
of the builtin modules is configured with 'preload', depending on
"extconfig" will cause config.c to automatically be initialize during
the preload stage.
Change-Id: I482ed6bca6c1064b05bb538d7861cd7a4f02d9fc
* acl (named_acl.c)
* cdr
* cel
* ccss
* dnsmgr
* dsp
* enum
* extconfig (config.c)
* features
* http
* indications
* logger
* manager
* plc
* sounds
* udptl
These modules are now loaded at appropriate time by the module loader.
Unlike loadable modules these use AST_MODULE_LOAD_FAILURE on error so
the module loader will abort startup on failure of these modules.
Some of these modules are still initialized or shutdown from outside the
module loader. logger.c is initialized very early and shutdown very
late, manager.c is initialized by the module loader but is shutdown by
the Asterisk core (too much uses it without holding references).
Change-Id: I371a9a45064f20026c492623ea8062d02a1ab97f
All log messages go to a queue serviced by a single thread
which does all the IO. This setting controls how big that
queue can get (and therefore how much memory is allocated)
before new messages are discarded. The default is 1000.
Should something go bezerk and log tons of messages in a tight
loop, this will prevent memory escalation.
When the limit is reached, a WARNING is logged to that effect
and messages are discarded until the queue is empty again. At
that time another WARNING will be logged with the count of
discarded messages. There's no "low water mark" for this queue
because the logger thread empties the entire queue and processes it
in 1 batch before going back and waiting on the queue again.
Implementing a low water mark would mean additional locking as
the thread processes each message and it's not worth it.
A "test" was added to test_logger.c but since the outcome is
non-deterministic, it's really just a cli command, not a unit
test.
Change-Id: Ib4520c95e1ca5325dbf584c7989ce391649836d1
In all non-pbx modules, AST_MODULE_LOAD_FAILURE has been changed
to AST_MODULE_LOAD_DECLINE. This prevents asterisk from exiting
if a module can't be loaded. If the user wishes to retain the
FAILURE behavior for a specific module, they can use the "require"
or "preload-require" keyword in modules.conf.
A new API was added to logger: ast_is_logger_initialized(). This
allows asterisk.c/check_init() to print to the error log once the
logger subsystem is ready instead of just to stdout. If something
does fail before the logger is initialized, we now print to stderr
instead of stdout.
Change-Id: I5f4b50623d9b5a6cb7c5624a8c5c1274c13b2b25
ASTERISK_REGISTER_FILE no longer has any purpose so this commit removes
all traces of it.
Previously exported symbols removed:
* __ast_register_file
* __ast_unregister_file
* ast_complete_source_filename
This also removes the mtx_prof static variable that was declared when
MTX_PROFILE was enabled. This variable was only used in lock.c so it
is now initialized in that file only.
ASTERISK-26480 #close
Change-Id: I1074af07d71f9e159c48ef36631aa432c86f9966
Remote asterisk consoles should only display verbose log messages
created by the daemon. The first patch for ASTERISK-26410 caused
a couple verbose messages to be printed when the rasterisk process
ended.
ASTERISK-26410
Change-Id: Ie2a1bb3753ad2724c0349ec1a336f52f7117b52a
Verbose messages should be printed to the console if the sublevel is
less than option_verbose. This fix ensures the welcome message with
copyright and license are printed at daemon and interactive rasterisk
startup.
ASTERISK-26410 #close
Change-Id: Ia44235e30ec328aba92ea2c8a837b094e65c9a03
Routines responsible for managing ast_callid's are overly complicated.
This is left-over code from when ast_callid was an AO2 object. Now that
it is an integer the code can be reduced.
ast_callid handler code no longer prints it's own error message upon failure
to allocate threadstorage as ast_calloc would have already printed a
message. Debug messages that were printed when TEST_FRAMEWORK was
enabled have been also been removed.
Change-Id: I65a768a78dc6cf3cfa071e97f33ce3dce280258e
Previous versions of Asterisk did not require verbose to be specified in
logger.conf for the console channel, if it was requested by command line
or asterisk.conf it just worked. This change causes Asterisk to always
enable verbose in the console channel level mask. Verbose is displayed
on consoles if requested by command line, option_verbose or 'core set
verbose'.
This also delays initialization of the logger until after threadstorage
is initialized. Initializing too early can cause messages to be printed
multiple times to the console (stdout).
ASTERISK-26391 #close
Change-Id: I52187d67c2fcb3efd5561bf04b3e5e23e5ee8a04
When logger.conf is missing or invalid we should be printing notices,
warnings and errors to the console. The logmask was incorrectly
calculated.
Change-Id: Ibaa9465a8682854bc1a5e9ba07079bea1bfb6bb3
The stringfields refactor to allow adding stringfields to the end of a
structure (f6f4cf459f) exposed some
incomplete cleanup code by some stringfield users.
The most noticeable leaker is the logging system where there is a leak for
every log message generated.
ASTERISK-26078 #close
Reported by: Etienne Lessard
Patches:
jira_asterisk_26078_v13.patch (license #5621) patch uploaded
by Richard Mudgett
Change-Id: If6a08b31336b492c3de6f9dfd07c447f8d5a8782
When 2d7a4a3357 was merged, it missed the fact that Verbose log messages
are formatted and handled by 'verbosers'. Verbosers are registered
functions that handle verbose messages only; they exist as a separate
class of callbacks. This was done to handle the 'magic' that must be
inserted into Verbose messages sent to remote consoles, so that the
consoles can format the messages correctly, i.e., the leading
tabs/characters.
In reality, verbosers are a weird appendage: they're a separate class of
formatters/message handlers outside of what handles all other log
messages in Asterisk. After some code inspection, it became clear that
simply passing a Verbose message along with its 'sublevel' importance
through the normal logging mechanisms removes the need for verbosers
altogether.
This patch removes the verbosers, and makes the default log formatter
aware that, if the log channel is a console log, it should simply insert
the 'verbose magic' into the log messages itself. This allows the
console handlers to interpret and format the verbose message
themselves.
This simplifies the code quite a lot, and should improve the performance
of printing verbose messages by a reasonable factor:
(1) It removes a number of memory allocations that were done on each
verobse message
(2) It removes the need to strip the verbose magic out of the verbose
log messages before passing them to non-console log channels
(3) It now performs fewer iterations over lists when handling verbose
messages
Since verbose messages are now handled like other log messages (for the
most part), the JSON formatting of the messages works as well.
ASTERISK-25425
Change-Id: I21bf23f0a1e489b5102f8a035fe8871552ce4f96
During refactoring of this support the addition of
the PID to messages was removed. This change adds it
back in.
ASTERISK-25538 #close
Change-Id: Ie2d43b0652e59b7ac319a7dba94501540d70ba36
The fix to ASTERISK-25407 introduced the usage of LOG_MAKEPRI. However
this macro is broken in older glibc (< 2.17); it would left-shift the
facility a second time, causing the resultant priority to become
invalid.
The syslog manpage mentions nothing about LOG_MAKEPRI and suggests this:
The priority argument is formed by ORing the facility and the level
values [...].
ASTERISK-25510 #close
Reported by: Michael Newton
Change-Id: Ia89debe7fac5ad090c7ef595c0707f31bb1e3d03
The null terminator of the tail struct member was not being allocated
when no logger.conf config file is installed.
ASTERISK-25714 #close
Reported by: Badalian Vyacheslav
Change-Id: I45770fdd08af39506a3bc33ba279c4f16e047a30
This removes logchannels locking from init_logger_chain, puts the
responsibility on the caller. Adds locking around the one call that was
missing it.
ASTERISK-24833
Change-Id: I6cc42117338bf9575650a67bcb78ab1a33d7bad8
ABI compatibility stubs existed for ast_app_separate_args and ast_verbose,
this is not needed in master.
Change-Id: I07b4d2c16079da3c2c6efa55df4a74368e0bd453
When Asterisk is part of a larger distributed system, log files are often
gathered using tools (such as logstash) that prefer to consume information
and have it rendered using other tools (such as Kibana) that prefer a
structured format, e.g., JSON. This patch adds support for JSON formatted
logs by adding support for an optional log format specifier in Asterisk's
logging subsystem. By adding a format specifier of '[json]':
full => [json]debug,verbose,notice,warning,error
Log messages will be output to the 'full' channel in the following
format:
{
"hostname": Hostname or name specified in asterisk.conf
"timestamp": Date/Time
"identifiers": {
"lwp": Thread ID,
"callid": Call Identifier
}
"logmsg": {
"location": {
"filename": Name of the file that generated the log statement
"function": Function that generated the log statement
"line": Line number that called the logging function
}
"level": Log level, e.g., DEBUG, VERBOSE, etc.
"message": Actual text of the log message
}
}
ASTERISK-25425 #close
Change-Id: I8649bfedf3fb7bf3138008cc11565553209cc238
There was a problem observed where the "logger add channel" CLI command
would allow for a channel with the same name to be added multiple times.
This would result in each message being written out to the same file
multiple times.
The problem was due to the difference in how logger channel filenames
are stored versus the format they are allowed to be presented when they
are added. For instance, if adding the logger channel "foo" through the
CLI, the result would be a logger channel with the file name
/var/log/asterisk/foo being stored. So when trying to add another "foo"
channel, "foo" would not match "/var/log/asterisk/foo" so we'd happily
add the duplicate channel.
The fix presented here is to introduce two new methods in the logger
code:
* make_filename(): given a logger channel name, this creates the
filename for that logger channel.
* find_logchannel(): given a logger channel name, this calls
make_filename() and then traverses the list of logchannels in order
to find a match.
This change has made use of make_filename() and find_logchannel()
throughout to more consistently behave.
ASTERISK-25305 #close
Reported by Mark Michelson
Change-Id: I892d52954d6007d8bc453c3cbdd9235dec9c4a36
Currently, Asterisk will log to the last configured syslog
channel in logger.conf. This is due to the fact that the
final call to openlog() supersedes all of the previous calls.
This commit removes the call to openlog() and passes the
facility to ast_log_vsyslog(), along with utilizing the
LOG_MAKEPRI macro to ensure that the message is routed to
the correct facility and with the correct priority.
ASTERISK-25407 #close
Reported by: Elazar Broad
Tested by: Elazar Broad
Change-Id: Ie2a2416bc00cce1b04e99ef40917c2011953ddd2
An http request can be sent to get the existing Asterisk logs.
The command "curl -v -u user:pass -X GET 'http://localhost:8088
/ari/asterisk/logging'" can be run in the terminal to access the
newly implemented functionality.
* Retrieve all existing log channels
ASTERISK-25252
Change-Id: I7bb08b93e3b938c991f3f56cc5d188654768a808
An http request can be sent to create a log channel
in Asterisk.
The command "curl -v -u user:pass -X POST
'http://localhost:088/ari/asterisk/logging/mylog?
configuration=notice,warning'" can be run in the terminal
to access the newly implemented functionality for ARI.
* Ability to create log channels using ARI
ASTERISK-25252
Change-Id: I9a20e5c75716dfbb6b62fd3474faf55be20bd782
An http request can be sent to delete a log channel
in Asterisk.
The command "curl -v -u user:pass -X DELETE 'http://localhost:8088
/ari/asterisk/logging/mylog'" can be run in the terminal
to access the newly implemented functionally for ARI.
* Able to delete log channels using ARI
ASTERISK-25252
Change-Id: Id6eeb54ebcc511595f0418d586ff55914bc3aae6
An http request can be sent to rotate a specified log channel.
If the channel does not exist, an error response will be
returned.
The command "curl -v -u user:pass -X PUT 'http://localhost:8088
/ari/asterisk/logging/logChannelName/rotate'" can be run in the
terminal to access this new functionality.
* Added the ability to rotate log files through ARI
ASTERISK-25252
Change-Id: Iaefa21cbbc1b29effb33004ee3d89c977e76ab01
Reset options to default values before reloading config. This ensures
that if a setting is removed or commented out of the configuration file
it is unset on reload.
ASTERISK-25112 #close
Reported by: Corey Farrell
Change-Id: Id24bb1fb0885c2c14cf8bd6f69a0c2ee7cd6c5bd
Git does not support the ability to replace a token with a version
string during check-in. While it does have support for replacing a
token on clone, this is somewhat sub-optimal: the token is replaced
with the object hash, which is not particularly easy for human
consumption. What's more, in practice, the source file version was often
not terribly useful. Generally, when triaging bugs, the overall version
of Asterisk is far more useful than an individual SVN version of a file. As a
result, this patch removes Asterisk's support for showing source file
versions.
Specifically, it does the following:
* Rename ASTERISK_FILE_VERSION macro to ASTERISK_REGISTER_FILE, and
remove passing the version in with the macro. Other facilities
than 'core show file version' make use of the file names, such as
setting a debug level only on a specific file. As such, the act of
registering source files with the Asterisk core still has use. The
macro rename now reflects the new macro purpose.
* main/asterisk:
- Refactor the file_version structure to reflect that it no longer
tracks a version field.
- Remove the "core show file version" CLI command. Without the file
version, it is no longer useful.
- Remove the ast_file_version_find function. The file version is no
longer tracked.
- Rename ast_register_file_version/ast_unregister_file_version to
ast_register_file/ast_unregister_file, respectively.
* main/manager: Remove value from the Version key of the ModuleCheck
Action. The actual key itself has not been removed, as doing so would
absolutely constitute a backwards incompatible change. However, since
the file version is no longer tracked, there is no need to attempt to
include it in the Version key.
* UPGRADE: Add notes for:
- Modification to the ModuleCheck AMI Action
- Removal of the "core show file version" CLI command
Change-Id: I6cf0ff280e1668bf4957dc21f32a5ff43444a40e
This introduces a new logger routine ast_log_safe. This routine should be
used for all error messages in code that can be run as a result of ast_log.
ast_log_safe does nothing if run recursively. All error logging in
astobj2.c, strings.c and utils.h have been switched to ast_log_safe.
This required adding support for raw threadstorage. This provides direct
access to the void* pointer in threadstorage. In ast_log_safe, NULL is used
to signify that this thread is not already running ast_log_safe, (void*)1 when
it is already running. This was done since it's critical that ast_log_safe
do nothing that could log during recursion checking.
ASTERISK-24155 #close
Reported by: Timo Teräs
Review: https://reviewboard.asterisk.org/r/4502/
........
Merged revisions 433522 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 433523 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433524 65c4cc65-6c06-0410-ace0-fbb531ad65f3
George Joseph
Steffen Arntz
Naveen Albert
Sean Bright
Philip Prindeville
Alexander Traud
Mark Murawski
George Joseph
Kevin Harwell
Richard Mudgett
Corey Farrell
zuul
Joshua Colp
Matt Jordan
Alexei Gradinari
Walter Doekes
Mark Michelson
Elazar Broad
Scott Emidy
Benjamin Ford