This commit is smaller than the initial review placed on review board. This is because
a change to allow for channel drivers to access parking functionality externally was
committed and invalidated quite a few of the changes initially made.
(closes issue ASTERISK-22039)
reported by Matt Jordan
Review: https://reviewboard.asterisk.org/r/2717
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396103 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This prevents XML documentation duplication by expanding channel and
bridge snapshot tags into channel and bridge snapshot parameter sets
with a given prefix or defaulting to no prefix. This also prevents
documentation from becoming fractured and out of date by keeping all
variations of the documentation in template form such that it only
needs to be updated once and keeps maintenance to a minimum.
Review: https://reviewboard.asterisk.org/r/2708/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395985 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* It merges Jaco Kroon's patch from ASTERISK-20754, which provides channel
information in the RTCP events. Because Stasis provides a cache, Jaco's
patch was modified to pass the channel uniqueid to the RTP layer as
opposed to a pointer to the channel. This has the following benefits:
(1) It keeps the RTP engine 'clean' of references back to channels
(2) It prevents circular dependencies and other potential ref counting issues
* The RTP engine now allows any RTP implementation to raise RTCP messages.
Potentially, other implementations (such as res_rtp_multicast) could also
raise RTCP information. The engine provides structs to represent RTCP headers
and RTCP SR/RR reports.
* Some general refactoring in res_rtp_asterisk was done to try and tame the
RTCP code. It isn't perfect - that's *way* beyond the scope of this work -
but it does feel marginally better.
* A few random bugs were fixed in the RTCP statistics. (Example: performing an
assignment of a = a is probably not correct)
* We now raise RTCP events for each SR/RR sent/received. Previously we wouldn't
raise an event when we sent a RR report.
Note that this work will be of use to others who want to monitor call quality
or build modules that report call quality statistics. Since the events are now
moving across the Stasis message bus, this is far easier to accomplish. It is
also a first step (though by no means the last step) towards getting Olle's
pinefrog work incorporated.
Again: note that the patch by Jaco Kroon was modified slightly for this work;
however, he did all of the hard work in finding the right places to set the
channel in the RTP engine across the channel drivers. Much thanks goes to Jaco
for his hard work here.
Review: https://reviewboard.asterisk.org/r/2603/
(closes issue ASTERISK-20574)
Reported by: Jaco Kroon
patches:
asterisk-rtcp-channel.patch uploaded by jkroon (License 5671)
(closes issue ASTERISK-21471)
Reported by: Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393740 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Breaks many things until they can be reworked. A partial list:
chan_agent
chan_dahdi, chan_misdn, chan_iax2 native bridging
app_queue
COLP updates
DTMF attended transfers
Protocol attended transfers
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389378 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Often, Asterisk may realize that a change in the source of an RTP stream is
about to occur and ask that the RTP engine reset it's lock on the current RTP
source. In certain scenarios, it may take awhile for the new remote system to
send RTP packets, while the old remote system may continue providing RTP during
that time period. This causes Asterisk to re-lock onto the old source, thereby
rejecting the new source when the old source stops sending RTP and the new
source begins.
This patch prevents that by having a constant secondary, 'secret' probation
mode enabled when an RTP source has been chosen. RTP packets from other sources
are always considered, but never chosen unless the current RTP source stops
sending RTP.
Review: https://reviewboard.asterisk.org/r/2364
(closes issue AST-1124)
Reported by: John Bigelow
Tested by: John Bigelow
(closes issue AST-1125)
Reported by: John Bigelow
Tested by: John Bigelow
........
Merged revisions 382573 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382589 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r375993 | mmichelson | 2012-11-07 11:01:13 -0600 (Wed, 07 Nov 2012) | 30 lines
Fix misuses of timeouts throughout the code.
Prior to this change, a common method for determining if a timeout
was reached was to call a function such as ast_waitfor_n() and inspect
the out parameter that told how many milliseconds were left, then use
that as the input to ast_waitfor_n() on the next go-around.
The problem with this is that in some cases, submillisecond timeouts
can occur, resulting in the out parameter not decreasing any. When this
happens thousands of times, the result is that the timeout takes much
longer than intended to be reached. As an example, I had a situation where
a 3 second timeout took multiple days to finally end since most wakeups
from ast_waitfor_n() were under a millisecond.
This patch seeks to fix this pattern throughout the code. Now we log the
time when an operation began and find the difference in wall clock time
between now and when the event started. This means that sub-millisecond timeouts
now cannot play havoc when trying to determine if something has timed out.
Part of this fix also includes changing the function ast_waitfor() so that it
is possible for it to return less than zero when a negative timeout is given
to it. This makes it actually possible to detect errors in ast_waitfor() when
there is no timeout.
(closes issue ASTERISK-20414)
reported by David M. Lee
Review: https://reviewboard.asterisk.org/r/2135/
........
r375994 | mmichelson | 2012-11-07 11:08:44 -0600 (Wed, 07 Nov 2012) | 3 lines
Remove some debugging that accidentally made it in the last commit.
........
Merged revisions 375993-375994 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375995 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 376014 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@376015 65c4cc65-6c06-0410-ace0-fbb531ad65f3
As mentioned on the review for this, WebRTC has moved towards choosing
DTLS-SRTP as the mechanism for key exchange for SRTP. This commit adds
support for this but makes it available for normal SIP clients as well.
Testing has been done to ensure that this introduces no regressions with
existing behavior and also that it functions as expected.
Review: https://reviewboard.asterisk.org/r/2113/
........
Merged revisions 373229 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373234 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The previous fix still would look in the static_RTP_PT table, which
is inappropriate since we specifically want to find a codec that has
been negotiated.
(closes issue ASTERISK-20296)
reported by NITESH BANSAL
Patches:
codec_negotiation.patch Uploaded by NITESH BANSAL (License #6418)
........
Merged revisions 372311 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372319 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The HANGUPCAUSE hash (trunk only) meant to replace SIP_CAUSE has now
been replaced with the HANGUPCAUSE and HANGUPCAUSE_KEYS dialplan
functions to better facilitate access to the AST_CAUSE translations
for technology-specific cause codes. The HangupCauseClear application
has also been added to remove this data from the channel.
(closes issue SWP-4738)
Review: https://reviewboard.asterisk.org/r/2025/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370316 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Channel drivers that allow native bridging need to handle
AST_CONTROL_PVT_CAUSE_CODE frames and previously did not handle them
properly, usually breaking out of the native bridge. This change
corrects that behavior and exposes the available cause code information
to the dialplan while native bridges are in place. This required
exposing the HANGUPCAUSE hash setter outside of channel.c, so
additional documentation has been added.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369086 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r369001 | kpfleming | 2012-06-15 10:56:08 -0500 (Fri, 15 Jun 2012) | 11 lines
Add support-level indications to many more source files.
Since we now have tools that scan through the source tree looking for files
with specific support levels, we need to ensure that every file that is
a component of a 'core' or 'extended' module (or the main Asterisk binary)
is explicitly marked with its support level. This patch adds support-level
indications to many more source files in tree, but avoids adding them to
third-party libraries that are included in the tree and to source files
that don't end up involved in Asterisk itself.
........
r369002 | kpfleming | 2012-06-15 10:57:14 -0500 (Fri, 15 Jun 2012) | 3 lines
Add a script to enable finding source files without support-levels defined.
........
Merged revisions 369001-369002 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 369005 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369013 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When remotely bridging calls with directmedia, Asterisk would check
the address of the peers/users holding directmedia ACLs (set via
directmediapermit/directmediadeny) instead of the bridged peer. This
is similar to r366547, but trunk specific and involves changes to
the rtpengine instead of just chan_sip.
(closes issue AST-876)
review: https://reviewboard.asterisk.org/r/1924/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367640 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is the starting point for the Asterisk 11: Who Hung Up work and provides
a framework which will allow channel drivers to report the types of hangup
cause information available in SIP_CAUSE without incurring the overhead of the
MASTER_CHANNEL dialplan function. The initial implementation only includes
cause generation for chan_sip and does not include cause code translation
utilities.
This change deprecates SIP_CAUSE and replaces its method of reporting cause
codes with the new framework. This change also deprecates the 'storesipcause'
option in sip.conf.
Review: https://reviewboard.asterisk.org/r/1822/
(Closes issue SWP-4221)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366408 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Move debug message in ast_rtp_instance_early_bridge_make_compatible() to
be output when what it states has actually happened.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362920 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The CHANNEL_DEADLOCK_AVOIDANCE() feature of preserving where the channel
lock was originally obtained is overkill where ast_channel_lock_both() was
inlined.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362888 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Everything still compiled after making these changes, so I assume these
whitespace-only changes didn't break anything (and shouldn't have).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360190 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit adds GoSub alternatives to connected line, redirecting, and CCSS
macro hooks so that macro can finally be deprecated. This also adds
deprecation warnings for those features when used and in documentation.
Review: https://reviewboard.asterisk.org/r/1760/
(closes issue SWP-4256)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357013 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Currently, when using res_srtp, once the SRTP policy has been added to the
current session the policy is locked into place. Any attempt to replace an
existing policy, which would be needed if the remote endpoint negotiated a new
cryptographic key, is instead rejected in res_srtp. This happens in particular
in transfer scenarios, where the endpoint that Asterisk is communicating with
changes but uses the same RTP session.
This patch modifies res_srtp to allow remote and local policies to be reloaded
in the underlying SRTP library. From the perspective of users of the SRTP API,
the only change is that the adding of remote and local policies are now added
in a single method call, whereas they previously were added separately. This
was changed to account for the differences in handling remote and local
policies in libsrtp.
Review: https://reviewboard.asterisk.org/r/1741/
(closes issue ASTERISK-19253)
Reported by: Thomas Arimont
Tested by: Thomas Arimont
Patches:
srtp_renew_keys_2012_02_22.diff uploaded by Matt Jordan (license 6283)
(with some small modifications for this check-in)
........
Merged revisions 356604 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 356605 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356606 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are many benefits to making the ast_channel an opaque handle, from
increasing maintainability to presenting ways to kill masquerades. This patch
kicks things off by taking things a field at a time, renaming the field to
'__do_not_use_${fieldname}' and then writing setters/getters and converting the
existing code to using them. When all fields are done, we can move ast_channel
to a C file from channel.h and lop off the '__do_not_use_'.
This patch sets up main/channel_interal_api.c to be the only file that actually
accesses the ast_channel's fields directly. The intent would be for any API
functions in channel.c to use the accessor functions. No more monkeying around
with channel internals. We should use our own APIs.
The interesting changes in this patch are the addition of
channel_internal_api.c, the moving of the AST_DATA stuff from channel.c to
channel_internal_api.c (note: the AST_DATA stuff will have to be reworked to
use accessor functions when ast_channel is really opaque), and some re-working
of the way channel iterators/callbacks are handled so as to avoid creating fake
ast_channels on the stack to pass in matching data by directly accessing fields
(since "name" is a stringfield and the fake channel doesn't init the
stringfields, you can't use the ast_channel_name_set() function). I went with
ast_channel_name(chan) for a getter, and ast_channel_name_set(chan, name) for a
setter.
The majority of the grunt-work for this change was done by writing a semantic
patch using Coccinelle ( http://coccinelle.lip6.fr/ ).
Review: https://reviewboard.asterisk.org/r/1655/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350223 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Failing to handle AST_CONTROL_UPDATE_RTP_PEER frames in the local bridge loop
causes the loop to exit prematurely. This causes a variety of negative side
effects, depending on when the loop exits. This patch handles the frame by
essentially swallowing the frame in the local loop, as the current channel
drivers expect the RTP bridge to handle the frame, and, in the case of the
local bridge loop, no additional action is necessary.
(issue ASTERISK-19040)
(issue ASTERISK-19128)
(issue ASTERISK-17725)
(issue ASTERISK-18340)
(closes issue ASTERISK-19095)
Reported by: Stefan Schmidt
Tested by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1640/
........
Merged revisions 349339 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 349340 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349341 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r336307 | jrose | 2011-09-16 16:09:20 -0500 (Fri, 16 Sep 2011) | 20 lines
Merged revisions 336294 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r336294 | jrose | 2011-09-16 14:53:40 -0500 (Fri, 16 Sep 2011) | 13 lines
Fix bad RTP media bridges in directmedia calls on peers separated by multiple Asterisk nodes.
In a situation involving devices on separate Asterisk trunks, the remote RTP bridge would
break when starting a call with directmedia. This patch queues a new type of control frame
so that our RTP bridge loop can properly detect when these situations occur and check to see
if peers need to be updated in order to send their media to the proper location.
(Closes issue ASTERISK-18340)
Reported by: Thomas Arimont
(Closes issue ASTERISK-17725)
Reported by: kwk
Tested by: twilson, jrose
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@336311 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.10
................
r328824 | kmoore | 2011-07-19 13:05:21 -0500 (Tue, 19 Jul 2011) | 18 lines
Merged revisions 328823 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r328823 | kmoore | 2011-07-19 12:57:18 -0500 (Tue, 19 Jul 2011) | 11 lines
RTP bridge away with inband DTMF and feature detection
When deciding whether Asterisk was allowed to bridge the call away from the
core, chan_sip did not take into account the usage of features on dialed
channels that require monitoring of DTMF on channels utilizing inband DTMF.
This would cause Asterisk to allow the call to be locally or remotely bridged,
preventing access to the data required to detect activations of such features.
(closes 17237)
Review: https://reviewboard.asterisk.org/r/1302/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@328825 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds pass-through support for CELT. CELT
formats are defined in codecs.conf and can be configured
to any sample rate a CELT endpoint supports. This patch also
addresses a crash in channel.c resulting from a frame list being
freed incorrectly. This crash was discovered while testing a CELT
translator which had to split encoded audio into multiple frames.
The codec translator is not a part of this patch, but may be
contributed in the future.
Review: https://reviewboard.asterisk.org/r/1294/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326855 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r321042 | twilson | 2011-05-26 10:29:54 -0700 (Thu, 26 May 2011) | 6 lines
Initialize stack-allocated ast_sockaddrs before use
It is important to always initialize ast_sockaddrs before use--even if they
are passed to ast_sockaddr_copy as the underlying storage could be bigger
than what ends up being copied--leaving part of the data unitialized.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321043 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r314017 | dvossel | 2011-04-18 08:41:06 -0500 (Mon, 18 Apr 2011) | 17 lines
sip codec negotiation of dynamic rtp payloads error fix
This patch fixes how chan_sip handles dynamic rtp payload types
it does not understand. At the moment if a dynamic payload's mime
type does not match one we understand, the payload does not get
removed from our payload table. As a result of this, the payload
is set to whatever dynamic codec we use internally for that payload
number on outgoing INVITES. This is incorrect.
This patch fixes this by properly checking the rtpmap set function's
return code to make sure it was found. The function can return both
-1 and -2 depending on the source of the mismatch. We were just
checking -1 explicitly.
Review: https://reviewboard.asterisk.org/r/1169/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@314018 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r310287 | alecdavis | 2011-03-11 19:47:44 +1300 (Fri, 11 Mar 2011) | 17 lines
remote_bridge_loop: prevent segfault when after transfer of IAX2 of DAHDI call
If the channel condition is one of the following after breaking out of the loop, don't try to update_peer
(where x = 0/1)
1). ZOMBIE
2). cx->tech_pvt != pvtx
3). gluex != ast_rtp_instance_get_glue(cx->tech->type))
(closes issue #18781)
Reported by: alecdavis
Patches:
bug18781.diff3.txt uploaded by alecdavis (license 585)
Tested by: alecdavis, ZX81
Review: https://reviewboard.asterisk.org/r/1128/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@310288 65c4cc65-6c06-0410-ace0-fbb531ad65f3
-Functional changes
1. Dynamic global format list build by codecs defined in codecs.conf
2. SILK 8khz, 12khz, 16khz, and 24khz with custom attributes defined in codecs.conf
3. Negotiation of SILK attributes in chan_sip.
4. SPEEX 32khz with translation
5. SLINEAR 8khz, 12khz, 24khz, 32khz, 44.1khz, 48khz, 96khz, 192khz with translation
using codec_resample.c
6. Various changes to RTP code required to properly handle the dynamic format list
and formats with attributes.
7. ConfBridge now dynamically jumps to the best possible sample rate. This allows
for conferences to take advantage of HD audio (Which sounds awesome)
8. Audiohooks are no longer limited to 8khz audio, and most effects have been
updated to take advantage of this such as Volume, DENOISE, PITCH_SHIFT.
9. codec_resample now uses its own code rather than depending on libresample.
-Organizational changes
Global format list is moved from frame.c to format.c
Various format specific functions moved from frame.c to format.c
Review: https://reviewboard.asterisk.org/r/1104/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@308582 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the foundation of an entire new way of looking at media in Asterisk.
The code present in this patch is everything required to complete phase1 of my
Media Architecture proposal. For more information about this project visit the link below.
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal
The primary function of this patch is to convert all the usages of format
bitfields in Asterisk to use the new format and format_cap APIs. Functionally
no change in behavior should be present in this patch. Thanks to twilson
and russell for all the time they spent reviewing these changes.
Review: https://reviewboard.asterisk.org/r/1083/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously, I had added the ast_sched_thread stuff that was a generic scheduler
thread implementation. However, if you used it, it required using different
functions for modifying scheduler contents. This patch reworks how this is
done and just allows you to optionally start a thread on the original scheduler
context structure that has always been there. This makes it trivial to switch
to the generic scheduler thread implementation without having to touch any of
the other code that adds or removes scheduler entries.
In passing, I made some naming tweaks to add ast_ prefixes where they were not
there before.
Review: https://reviewboard.asterisk.org/r/1007/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@299091 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r293803 | twilson | 2010-11-03 11:05:14 -0700 (Wed, 03 Nov 2010) | 25 lines
Avoid valgrind warnings for ast_rtp_instance_get_xxx_address
The documentation for ast_rtp_instance_get_(local/remote)_address stated that
they returned 0 for success and -1 on failure. Instead, they returned 0 if the
address structure passed in was already equivalent to the address instance
local/remote address or 1 otherwise. 90% of the calls to these functions
completely ignored the return address and passed in an uninitialized struct,
which would make valgrind complain even though the operation was technically
safe.
This patch fixes the documentation and converts the get_xxx_address functions
to void since all they really do is copy the address and cannot fail.
Additionally two new functions
(ast_rtp_instance_get_and_cmp_(local/remote)_address) are created for the 3
times where the return value was actually checked. The
get_and_cmp_local_address function is currently unused, but exists for the sake
of symmetry.
The only functional change as a result of this change is that we will not do an
ast_sockaddr_cmp() on (mostly uninitialized) addresses before doing the
ast_sockaddr_copy() in the get_*_address functions. So, even though it is an
API change, it shouldn't have a noticeable change in behavior.
Review: https://reviewboard.asterisk.org/r/995/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@293809 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r289840 | jpeeler | 2010-10-01 21:43:45 -0500 (Fri, 01 Oct 2010) | 29 lines
Merged revisions 289798 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r289798 | jpeeler | 2010-10-01 18:01:31 -0500 (Fri, 01 Oct 2010) | 22 lines
Merged revisions 289797 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r289797 | jpeeler | 2010-10-01 17:58:38 -0500 (Fri, 01 Oct 2010) | 15 lines
Change RFC2833 DTMF event duration on end to report actual elapsed time.
The scenario here is with a non P2P early media session. The reported time
length of DTMF presses are coming up short when sending to the remote side.
Currently the event duration is a running total that is incremented when sending
continuation packets. These continuation packets are only triggered upon
incoming media from the remote side, which means that the running total probably
is not going to end up matching the actual length of time Asterisk received
DTMF. This patch changes the end event duration to be lengthened if it is
detected that the end event is going to come up short.
Review: https://reviewboard.asterisk.org/r/957/
ABE-2476
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@289841 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r284477 | twilson | 2010-09-01 13:44:36 -0500 (Wed, 01 Sep 2010) | 17 lines
Fix SRTP for changing SSRC and multiple a=crypto SDP lines
Adding code to Asterisk that changed the SSRC during bridges and masquerades
broke SRTP functionality. Also broken was handling the situation where an
incoming INVITE had more than one crypto offer. This patch caches the SRTP
policies the we use so that we can change the ssrc and inform libsrtp of the
new streams. It also uses the first acceptable a=crypto line from the incoming
INVITE.
(closes issue #17563)
Reported by: Alexcr
Patches:
srtp.diff uploaded by twilson (license 396)
Tested by: twilson
Review: https://reviewboard.asterisk.org/r/878/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@284479 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds a generic API for accommodating IPv6 and IPv4 addresses
within Asterisk. While many files have been updated to make use of the
API, chan_sip and the RTP code are the files which actually support
IPv6 addresses at the time of this commit. The way has been paved for
easier upgrading for other files in the near future, though.
Big thanks go to Simon Perrault, Marc Blanchet, and Jean-Philippe Dionne
for their hard work on this.
(closes issue #17565)
Reported by: russell
Patches:
asteriskv6-test-report.pdf uploaded by russell (license 2)
Review: https://reviewboard.asterisk.org/r/743
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@274783 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After 5 years in mantis and over a year on reviewboard, SRTP support is finally
being comitted. This includes generic CHANNEL dialplan functions that work for
getting the status of whether a call has secure media or signaling as defined
by the underlying channel technology and for setting whether or not a new
channel being bridged to a calling channel should have secure signaling or
media. See doc/tex/secure-calls.tex for examples.
Original patch by mikma, updated for trunk and revised by me.
(closes issue #5413)
Reported by: mikma
Tested by: twilson, notthematrix, hemanshurpatel
Review: https://reviewboard.asterisk.org/r/191/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@268894 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From reviewboard:
Digium has a commercial customer who has made extensive use of the connected party and
redirecting information present in later versions of Asterisk Business Edition and which
is to be in the upcoming 1.8 release. Through their use of the feature, new problems and solutions
have come about. This patch adds several enhancements to maximize usage of the connected party
and redirecting information functionality.
First, Asterisk trunk already had connected line interception macros. These macros allow you to
manipulate connected line information before it was sent out to its target. This patch adds the
same feature except for redirecting information instead.
Second, the ast_callerid and ast_party_id structures have been enhanced to provide a "tag." This
tag can be set with func_callerid, func_connectedline, func_redirecting, and in the case of DAHDI,
mISDN, and SIP channels, can be set in a configuration file. The idea behind the callerid tag is
that it can be set to whatever value the administrator likes. Later, when running connected line
and redirecting macros, the admin can read the tag off the appropriate structure to determine what
action to take. You can think of this sort of like a channel variable, except that instead of having
the variable associated with a channel, the variable is associated with a specific identity within
Asterisk.
Third, app_dial has two new options, s and u. The s option lets a dialplan writer force a specific
caller ID tag to be placed on the outgoing channel. The u option allows the dialplan writer to force
a specific calling presentation value on the outgoing channel.
Fourth, there is a new control frame subclass called AST_CONTROL_READ_ACTION added. This was added
to correct a very specific situation. In the case of SIP semi-attended (blond) transfers, the party
being transferred would not have the opportunity to run a connected line interception macro to
possibly alter the transfer target's connected line information. The issue here was that during a
blond transfer, the SIP transfer code has no bridged channel on which to queue the connected line
update. The way this was corrected was to add this new control frame subclass. Now, we queue an
AST_CONTROL_READ_ACTION frame on the channel on which the connected line interception macro should
be run. When ast_read is called to read the frame, ast_read responds by calling a callback function
associated with the specific read action the control frame describes. In this case, the action taken
is to run the connected line interception macro on the transferee's channel.
Review: https://reviewboard.asterisk.org/r/652/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@263541 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change basically reverts the change reviewed in
https://reviewboard.asterisk.org/r/374/ and instead limits the
updating of the RTP synchronization source to only those times when we
detect that the other side of the conversation has changed the ssrc.
The problem is that SRCUPDATE control frames are sent many times where
we don't want a new ssrc, including whenever Asterisk has to send DTMF
in a normal bridge. This is also not the first time that this mistake
has been made. The initial implementation of the ast_rtp_new_source
function also changed the ssrc--and then it was removed because of
this same issue. Then, we put it back in again to fix a different
issue. This patch attempts to only change the ssrc when we see that
the other side of the conversation has changed the ssrc.
It also renames some functions to make their purpose more clear.
Review: https://reviewboard.asterisk.org/r/540/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@252089 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In the process of swapping ULAW to a place in the extended codec space, we
found several unhandled cases, where a 32-bit integer was still being used to
handle a codec field. Most of these have been fixed with this commit, although
there is at least one case (codec_dahdi) which depends upon outside headers to
be altered before a conversion can be made.
(Fixes AST-278, SWP-459)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@231850 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r221086 | twilson | 2009-09-30 09:49:11 -0500 (Wed, 30 Sep 2009) | 25 lines
Change the SSRC by default when our media stream changes
Be default, change SSRC when doing an audio stream changes Asterisk doesn't
honor marker bit when reinvited to already-bridged RTP streams,resulting in
far-end stack discarding packets with "old" timestamps that areactually part of
a new stream. This patch sends AST_CONTROL_SRCUPDATE whenever there is a
reinvite, unless the 'constantssrc' is set to true in sip.conf.
The original issue reported to Digium support detailed the following situation:
ITSP <-> Asterisk 1.4.26.2 <-> SIP-based Application Server Call comes in
fromITSP, Asterisk dials the app server which sends a re-invite back
toAsterisk--not to negotiate to send media directly to the ITSP, but to
indicatethat it's changing the stream it's sending to Asterisk. The app
servergenerates a new SSRC, sequence numbers, timestamps, and sets the marker
bit on the new stream. Asterisk passes through the teimstamp of the new stream,
butdoes not reset the SSRC, sequence numbers, or set the marker bit.
When the timestamp on the new stream is older than the timestamp on the
originalstream, the ITSP (which doesn't know there has been any change) discards
the newframes because it thinks they are too old. This patch addresses this by
changing the SSRC on a stream update unless constantssrc=true is set in
sip.conf.
Review: https://reviewboard.asterisk.org/r/374/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@221266 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Over the past couple of months, a number of issues with Asterisk
negotiating (and successfully completing) T.38 sessions with various
endpoints have been found. This patch attempts to address many of
them, primarily focused around ensuring that the endpoints'
MaxDatagram size is honored, and in addition by ensuring that T.38
session parameter negotiation is performed correctly according to the
ITU T.38 Recommendation.
The major changes here are:
1) T.38 applications in Asterisk (app_fax) only generate/receive IFP
packets, they do not ever work with UDPTL packets. As a result of
this, they cannot be allowed to generate packets that would overflow
the other endpoints' MaxDatagram size after the UDPTL stack adds any
error correction information. With this patch, the application is told
the maximum *IFP* size it can generate, based on a calculation using
the far end MaxDatagram size and the active error correction mode on
the T.38 session. The same is true for sending *our* MaxDatagram size
to the remote endpoint; it is computed from the value that the
application says it can accept (for a single IFP packet) combined with
the active error correction mode.
2) All treatment of T.38 session parameters as 'capabilities' in
chan_sip has been removed; these parameters are not at all like
audio/video stream capabilities. There are strict rules to follow for
computing an answer to a T.38 offer, and chan_sip now follows those
rules, using the desired parameters from the application (or channel)
that wants to accept the T.38 negotiation.
3) chan_sip now stores and forwards ast_control_t38_parameters
structures for tracking 'our' and 'their' T.38 session parameters;
this greatly simplifies negotiation, especially for pass-through
calls.
4) Since T.38 negotiation without specifying parameters or receiving
the final negotiated parameters is not very worthwhile, the
AST_CONTROL_T38 control frame has been removed. A note has been added
to UPGRADE.txt about this removal, since any out-of-tree applications
that use it will no longer function properly until they are upgraded
to use AST_CONTROL_T38_PARAMETERS.
Review: https://reviewboard.asterisk.org/r/310/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@208464 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This API provides a generic way for multiple RTP stacks to be
integrated into Asterisk. Right now there is only one present, res_rtp_asterisk,
which is the existing Asterisk RTP stack. Functionality wise this commit
performs the same as previously. API documentation can be viewed in the
rtp_engine.h header file.
Review: http://reviewboard.digium.com/r/209/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@186078 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Mark Michelson
Kinsey Moore
Matthew Jordan
Richard Mudgett
David M. Lee
Joshua Colp
Kevin P. Fleming
Jonathan Rose
Terry Wilson
Paul Belanger
David Vossel
Matthew Nicholson
Russell Bryant
Alec L Davis
Jeff Peeler
Tilghman Lesher
Jason Parker