![Code Testing](https://github.com/sipwise/rtpengine/workflows/Code%20Testing/badge.svg) ![Debian Package CI](https://github.com/sipwise/rtpengine/workflows/Debian%20Packaging/badge.svg) ![Coverity](https://img.shields.io/coverity/scan/sipwise-rtpengine.svg) What is rtpengine? ======================= The [Sipwise](http://www.sipwise.com/) NGCP rtpengine is a proxy for RTP traffic and other UDP based media traffic. It's meant to be used with the [Kamailio SIP proxy](http://www.kamailio.org/) and forms a drop-in replacement for any of the other available RTP and media proxies. Currently the only supported platform is GNU/Linux. Mailing List ============ For general questions, discussion, requests for support, and community chat, join our [mailing list](https://rtpengine.com/mailing-list). Please do not use the Github issue tracker for this purpose. Features ========= * Media traffic running over either IPv4 or IPv6 * Bridging between IPv4 and IPv6 user agents * Bridging between different IP networks or interfaces * TOS/QoS field setting * Customizable port range * Multi-threaded * Advertising different addresses for operation behind NAT * In-kernel packet forwarding for low-latency and low-CPU performance * Automatic fallback to normal userspace operation if kernel module is unavailable * Support for *Kamailio*'s *rtpproxy* module * Legacy support for old *OpenSER* *mediaproxy* module * HTTP, HTTPS, and WebSocket (WS and WSS) interfaces When used through the *rtpengine* module (or its older counterpart called *rtpproxy-ng*), the following additional features are available: - Full SDP parsing and rewriting - Supports non-standard RTCP ports (RFC 3605) - ICE (RFC 5245) support: + Bridging between ICE-enabled and ICE-unaware user agents + Optionally acting only as additional ICE relay/candidate + Optionally forcing relay of media streams by removing other ICE candidates + Optionally act as an "ICE lite" peer only - SRTP (RFC 3711) support: + Support for SDES (RFC 4568) and DTLS-SRTP (RFC 5764) + AES-CM and AES-F8 ciphers, both in userspace and in kernel + HMAC-SHA1 packet authentication + Bridging between RTP and SRTP user agents + Opportunistic SRTP (RFC 8643) + AES-GCM Authenticated Encryption (AEAD) (RFC 7714) - Support for RTCP profile with feedback extensions (RTP/AVPF, RFC 4585 and 5124) - Arbitrary bridging between any of the supported RTP profiles (RTP/AVP, RTP/AVPF, RTP/SAVP, RTP/SAVPF) - RTP/RTCP multiplexing (RFC 5761) and demultiplexing - Breaking of BUNDLE'd media streams (draft-ietf-mmusic-sdp-bundle-negotiation) - Recording of media streams, decrypted if possible - Transcoding and repacketization - Transcoding between RFC 2833/4733 DTMF event packets and in-band DTMF tones (and vice versa) - Injection of DTMF events or PCM DTMF tones into running audio streams - Playback of pre-recorded streams/announcements - Transcoding between T.38 and PCM (G.711 or other audio codecs) - Silence detection and comfort noise (RFC 3389) payloads * Media forking * Publish/subscribe mechanism for N-to-N media forwarding There is also limited support for *rtpengine* to be used as a drop-in replacement for *Janus* using the native Janus control protocol (see below). *Rtpengine* does not (yet) support: * ZRTP, although ZRTP passes through *rtpengine* just fine Compiling and Installing ========================= Package Repositories -------------------- Prebuilt packages for some newer releases of Debian are available on [this repository](https://dfx.at/rtpengine) Compiling on a Debian System ---------------------------- On a Debian system, everything can be built and packaged into Debian packages by executing `dpkg-buildpackage` (which can be found in the `dpkg-dev` package) in the main directory. This script will issue an error and stop if any of the dependency packages are not installed. The script `dpkg-checkbuilddeps` can be used to check missing dependencies. (See the note about G.729 at the end of this section.) This will produce a number of `.deb` files, which can then be installed using the `dpkg -i` command. The generated files are (with version 6.2.0.0 being built on an amd64 system): * `ngcp-rtpengine_6.2.0.0+0~mr6.2.0.0_all.deb` This is a meta-package, which doesn't contain or install anything on its own, but rather only depends on the other packages to be installed. Not strictly necessary to be installed. * `ngcp-rtpengine-daemon_6.2.0.0+0~mr6.2.0.0_amd64.deb` This installed the userspace daemon, which is the main workhorse of rtpengine. This is the minimum requirement for anything to work. * `ngcp-rtpengine-iptables_6.2.0.0+0~mr6.2.0.0_amd64.deb` Installs the plugin for `iptables` and `ip6tables`. Necessary for in-kernel operation. * `ngcp-rtpengine-kernel-dkms_6.2.0.0+0~mr6.2.0.0_all.deb` Kernel module, DKMS version of the package. Recommended for in-kernel operation. The kernel module will be compiled against the currently running kernel using DKMS. * `ngcp-rtpengine-kernel-source_6.2.0.0+0~mr6.2.0.0_all.deb` If DKMS is unavailable or not desired, then this package will install the sources for the kernel module for manual compilation. Required for in-kernel operation, but only if the DKMS package can't be used. * `ngcp-rtpengine-recording-daemon_6.2.0.0+0~mr6.2.0.0_amd64.deb` Optional separate userspace daemon used for call recording features. * `-dbg...` or `-dbgsym...` packages Debugging symbols for the various components. Optional. For transcoding purposes, Debian provides an additional package `libavcodec-extra` to replace the regular `libavcodec` package. It is recommended to install this extra package to offer support for additional codecs. To support the G.729 codec for transcoding purposes, the external library *bcg729* is required. Please see the section on *G.729 support* below for details. Manual Compilation ------------------ There are 3 main parts to *rtpengine* plus one optional component, which can be found in the respective subdirectories. Running `make` on the top source directory will build all parts. Running `make check` additionally will run the test suite. * `daemon` The userspace daemon and workhorse, minimum requirement for anything to work. Running `make` will compile the binary, which will be called `rtpengine`. The following software packages including their development headers are required to compile the daemon: - *pkg-config* - *GLib* including *GThread* and *GLib-JSON* version 2.x - *zlib* - *OpenSSL* - *PCRE* library - *XMLRPC-C* version 1.16.08 or higher - *hiredis* library - *gperf* - *libcurl* version 3.x or 4.x - *libevent* version 2.x - *libpcap* - *libsystemd* - *spandsp* - *MySQL* or *MariaDB* client library (optional for media playback and call recording daemon) - *libiptc* library for iptables management (optional) - *ffmpeg* codec libraries for transcoding (optional) such as *libavcodec*, *libavfilter*, *libswresample* - *bcg729* for full G.729 transcoding support (optional) - *libmosquitto* - *libwebsockets* - *libopus* The `Makefile` contains a few Debian-specific flags, which may have to removed for compilation to be successful. This will not affect operation in any way. If you do not wish to (or cannot) compile the optional iptables management feature, the `Makefile` also contains a switch to disable it. See the `--iptables-chain` option for a description. The name of the `make` switch and its default value is `with_iptables_option=yes`. Similarly, the transcoding feature can be excluded via a switch in the `Makefile`, making it unnecessary to have the *ffmpeg* libraries installed. The name of the `make` switch and its default value is `with_transcoding=yes`. Both `Makefile` switches can be provided to the `make` system via environment variables, for example by building with the shell command `with_transcoding=no make`. * `iptables-extension` Required for in-kernel packet forwarding. With the `iptables` development headers installed, issuing `make` will compile the plugin for `iptables` and `ip6tables`. The file will be called `libxt_RTPENGINE.so` and needs to be copied into the `xtables` module directory. It is copied on `make install`. The location of this directory can be determined through `pkg-config xtables --variable=xtlibdir` on newer systems, and/or is usually either `/lib/xtables/` or `/usr/lib/x86_64-linux-gnu/xtables/`. * `kernel-module` Required for in-kernel packet forwarding. Compilation of the kernel module requires the kernel development headers to be installed in `/lib/modules/$VERSION/build/`, where *$VERSION* is the output of the command `uname -r`. For example, if the command `uname -r` produces the output `3.9-1-amd64`, then the kernel headers must be present in `/lib/modules/3.9-1-amd64/build/`. The last component of this path (`build`) is usually a symlink somewhere into `/usr/src/`, which is fine. Successful compilation of the module will produce the file `xt_RTPENGINE.ko`. The module can be inserted into the running kernel manually through `insmod xt_RTPENGINE.ko` (which will result in an error if depending modules aren't loaded, for example the `x_tables` module), but it's recommended to copy the module into `/lib/modules/$VERSION/updates/`, followed by running `depmod -a`. This copying is performed on `make install`. After this, the module can be loaded by issuing `modprobe xt_RTPENGINE`. * `recording-daemon` Optional component for the call recording feature. Prerequisites are usage of the kernel module and availability of transcoding (via *ffmpeg*) Usage ===== Userspace Daemon ---------------- The options are described in detail in the rtpengine(1) man page. If you're reading this on Github, you can view the current master's man page [here](https://github.com/sipwise/rtpengine/blob/master/daemon/rtpengine.pod). In-kernel Packet Forwarding --------------------------- In normal userspace-only operation, the overhead involved in processing each individual RTP or media packet is quite significant. This comes from the fact that each time a packet is received on a network interface, the packet must first traverse the stack of the kernel's network protocols, down to locating a process's file descriptor. At this point the linked user process (the daemon) has to be signalled that a new packet is available to be read, the process has to be scheduled to run, once running the process must read the packet, which means it must be copied from kernel space to user space, involving an expensive context switch. Once the packet has been processed by the daemon, it must be sent out again, reversing the whole process. All this wouldn't be a big deal if it wasn't for the fact that RTP traffic generally consists of many small packets being transferred at high rates. Since the forwarding overhead is incurred on a per-packet basis, the ratio of useful data processed to overhead drops dramatically. For these reasons, *rtpengine* provides a kernel module to offload the bulk of the packet forwarding duties from user space to kernel space. Using this technique, a large percentage of the overhead can be eliminated, CPU usage greatly reduced and the number of concurrent calls possible to be handled increased. In-kernel packet forwarding is implemented as an *iptables* module (or more precisely, an *x\_tables* module). As such, it comes in two parts, both of which are required for proper operation. One part is the actual kernel module called `xt_RTPENGINE`. The second part is a plugin to the `iptables` and `ip6tables` command-line utilities to make it possible to actually add the required rule to the tables. ### Overview ### In short, the prerequisites for in-kernel packet forwarding are: 1. The `xt_RTPENGINE` kernel module must be loaded. 2. An `iptables` and/or `ip6tables` rule must be present in the `INPUT` chain (or in a custom user-defined chain which is then called by the `INPUT` chain) to send packets to the `RTPENGINE` target. This rule should be limited to UDP packets, but otherwise there are no restrictions. 3. The `rtpengine` daemon must be running. 4. All of the above must be set up with the same forwarding table ID (see below). The sequence of events for a newly established media stream is then: 1. The SIP proxy (e.g. *Kamailio*) controls *rtpengine* and informs it about a newly established call. 2. The `rtpengine` daemon allocates local UDP ports and sets up preliminary forward rules based on the info received from the SIP proxy. Only userspace forwarding is set up, nothing is pushed to the kernel module yet. 3. An RTP packet is received on the local port. 4. It traverses the *iptables* chains and gets passed to the *xt\_RTPENGINE* module. 5. The module doesn't recognize it as belonging to an established stream and thus ignores it. 6. The packet continues normal processing and eventually ends up in the daemon's receive queue. 7. The daemon reads it, processes it and forwards it. It also updates some internal data. 8. This userspace-only processing and forwarding continues for a little while, during which time information about additional streams and/or endpoints may be obtained from the SIP proxy. 9. After a few seconds, when the daemon is satisfied with what it has learned about the media endpoints, it pushes the forwarding rules to the kernel. 10. From this moment on, the kernel module will recognize incoming packets belonging to those streams and will forward them on its own. It will stop those packets from traversing the network stacks any further, so the daemon will not see them any more on its receive queues. 11. In-kernel forwarding is allowed to cease to work at any given time, either accidentally (e.g. by removal of the *iptables* rule) or deliberately (the daemon will do so in case of a re-invite), in which case forwarding falls back to userspace-only operation. ### The Kernel Module ### The kernel module supports multiple forwarding tables (not to be confused with the tables managed by *iptables*), which are identified through their ID number. By default, up to 64 forwarding tables can be created and used, giving them the ID numbers 0 through 63. Each forwarding table can be thought of a separate proxy instance. Each running instance of the *rtpengine* daemon controls one such table, and each table can only be controlled by one running instance of the daemon at any given time. In the most common setup, there will be only a single instance of the daemon running and there will be only a single forwarding table in use, with ID zero. The kernel module can be loaded with the command `modprobe xt_RTPENGINE`. With the module loaded, a new directory will appear in `/proc/`, namely `/proc/rtpengine/`. After loading, the directory will contain only two pseudo-files, `control` and `list`. The `control` file is write-only and is used to create and delete forwarding tables, while the `list` file is read-only and will produce a list of currently active forwarding tables. With no tables active, it will produce an empty output. The `control` pseudo-file supports two commands, `add` and `del`, each followed by the forwarding table ID number. To manually create a forwarding table with ID 42, the following command can be used: echo 'add 42' > /proc/rtpengine/control After this, the `list` pseudo-file will produce the single line `42` as output. This will also create a directory called `42` in `/proc/rtpengine/`, which contains additional pseudo-files to control this particular forwarding table. To delete this forwarding table, the command `del 42` can be issued like above. This will only work if no *rtpengine* daemon is currently running and controlling this table. Each subdirectory `/proc/rtpengine/$ID/` corresponding to each forwarding table contains the pseudo-files `blist`, `control`, `list` and `status`. The `control` file is write-only while the others are read-only. The `control` file will be kept open by the *rtpengine* daemon while it's running to issue updates to the forwarding rules during runtime. The daemon also reads the `blist` file on a regular basis, which produces a list of currently active forwarding rules together with their stats and other details within that table in a binary format. The same output, but in human-readable format, can be obtained by reading the `list` file. Lastly, the `status` file produces a short stats output for the forwarding table. Manual creation of forwarding tables is normally not required as the daemon will do so itself, however deletion of tables may be required after shutdown of the daemon or before a restart to ensure that the daemon can create the table it wants to use. The kernel module can be unloaded through `rmmod xt_RTPENGINE`, however this only works if no forwarding table currently exists and no *iptables* rule currently exists. ### The *iptables* module ### In order for the kernel module to be able to actually forward packets, an *iptables* rule must be set up to send packets into the module. Each such rule is associated with one forwarding table. In the simplest case, for forwarding table 42, this can be done through: iptables -I INPUT -p udp -j RTPENGINE --id 42 If IPv6 traffic is expected, the same should be done using `ip6tables`. It is possible but not strictly necessary to restrict the rules to the UDP port range used by *rtpengine*, e.g. by supplying a parameter like `--dport 30000:40000`. If the kernel module receives a packet that it doesn't recognize as belonging to an active media stream, it will simply ignore it and hand it back to the network stack for normal processing. The `RTPENGINE` rule need not necessarily be present directly in the `INPUT` chain. It can also be in a user-defined chain which is then referenced by the `INPUT` chain, like so: iptables -N rtpengine iptables -I INPUT -p udp -j rtpengine iptables -I rtpengine -j RTPENGINE --id 42 This can be a useful setup if certain firewall scripts are being used. Summary ------- A typical start-up sequence including in-kernel forwarding might look like this: # this only needs to be one once after system (re-) boot modprobe xt_RTPENGINE iptables -I INPUT -p udp -j RTPENGINE --id 0 ip6tables -I INPUT -p udp -j RTPENGINE --id 0 # ensure that the table we want to use doesn't exist - usually needed after a daemon # restart, otherwise will error echo 'del 0' > /proc/rtpengine/control # start daemon /usr/bin/rtpengine --table=0 --interface=10.64.73.31 --interface=2001:db8::4f3:3d \ --listen-ng=127.0.0.1:2223 --tos=184 --pidfile=/run/rtpengine.pid --no-fallback Running Multiple Instances -------------------------- In some cases it may be desired to run multiple instances of *rtpengine* on the same machine, for example if the host is multi-homed and has multiple usable network interfaces with different addresses. This is supported by running multiple instances of the daemon using different command-line options (different local addresses and different listening ports), together with multiple different kernel forwarding tables. For example, if one local network interface has address 10.64.73.31 and another has address 192.168.65.73, then the start-up sequence might look like this: modprobe xt_RTPENGINE iptables -I INPUT -p udp -d 10.64.73.31 -j RTPENGINE --id 0 iptables -I INPUT -p udp -d 192.168.65.73 -j RTPENGINE --id 1 echo 'del 0' > /proc/rtpengine/control echo 'del 1' > /proc/rtpengine/control /usr/bin/rtpengine --table=0 --interface=10.64.73.31 \ --listen-ng=127.0.0.1:2223 --tos=184 --pidfile=/run/rtpengine-10.pid --no-fallback /usr/bin/rtpengine --table=1 --interface=192.168.65.73 \ --listen-ng=127.0.0.1:2224 --tos=184 --pidfile=/run/rtpengine-192.pid --no-fallback With this setup, the SIP proxy can choose which instance of *rtpengine* to talk to and thus which local interface to use by sending its control messages to either port 2223 or port 2224. Transcoding =========== Currently transcoding is supported for audio streams. The feature can be disabled on a compile-time basis, and is enabled by default. Even though the transcoding feature is available by default, it is not automatically engaged for normal calls. Normally *rtpengine* leaves codec negotiation up to the clients involved in the call and does not interfere. In this case, if the clients fail to agree on a codec, the call will fail. The transcoding feature can be engaged for a call by instructing *rtpengine* to do so by using one of the transcoding options in the *ng* control protocol, such as `transcode` or `ptime` (see below). If a codec is requested via the `transcode` option that was not originally offered, transcoding will be engaged for that call. With transcoding active for a call, all unsupported codecs will be removed from the SDP. Transcoding happens in userspace only, so in-kernel packet forwarding will not be available for transcoded codecs. However, even if the transcoding feature has been engaged for a call, not all codecs will necessarily end up being transcoded. Codecs that are supported by both sides will simply be passed through transparently (unless repacketization is active). In-kernel packet forwarding will still be available for these codecs. The following codecs are supported by *rtpengine*: * G.711 (a-Law and ยต-Law) * G.722 * G.723.1 * G.729 * Speex * GSM * iLBC * Opus * AMR (narrowband and wideband) * EVS (if supplied -- see below) Codec support is dependent on support provided by the `ffmpeg` codec libraries, which may vary from version to version. Use the `--codecs` command line option to have *rtpengine* print a list of codecs and their supported status. The list includes some codecs that are not listed above. Some of these are not actual VoIP codecs (such as MP3), while others lack support for encoding by *ffmpeg* at the time of writing (such as QCELP or ATRAC). If encoding support for these codecs becomes available in *ffmpeg*, *rtpengine* will be able to support them. Audio format conversion including resampling and mono/stereo up/down-mixing happens automatically as required by the codecs involved. For example, one side could be using stereo Opus at 48 kHz sampling rate, and the other side could be using mono G.711 at 8 kHz, and *rtpengine* will perform the necessary conversions. If repacketization (using the `ptime` option) is requested, the transcoding feature will also be engaged for the call, even if no additional codecs were requested. G.729 support ------------- As *ffmpeg* does not currently provide an encoder for G.729, transcoding support for it is available via the [bcg729](https://www.linphone.org/technical-corner/bcg729/) library (mirror on [GitHub](https://github.com/BelledonneCommunications/bcg729)). The build system looks for the *bcg729* headers in a few locations and uses the library if found. If the library is located elsewhere, see `daemon/Makefile` to control where the build system is looking for it. In a Debian build environment, `debian/control` lists a build-time dependency on *bcg729*. Newer Debian releases (currently *bullseye*, *bookworm*, *sid*) include *bcg729* as a package so nothing needs to be done there. Older Debian releases do not currently include a *bcg729* package, but one can be built locally using these instructions on [GitHub](https://github.com/ossobv/bcg729-deb). *Sipwise* provides a pre-packaged version of this as part of our [C5 CE](https://www.sipwise.com/products/class-5-softswitch-carrier-grade-for-voice-over-ip/) product which is [available here](https://deb.sipwise.com/spce/mr6.2.1/pool/main/b/bcg729/). Alternatively the build dependency can be removed from `debian/control` or by switching to a different Debian build profile. Set the environment variable `export DEB_BUILD_PROFILES="pkg.ngcp-rtpengine.nobcg729"` (or use the `-P` flag to the *dpkg* tools) and then build the *rtpengine* packages. DTMF transcoding ---------------- *Rtpengine* supports transcoding between RFC 2833/4733 DTMF event packets (`telephone-event` payloads) and in-band DTMF audio tones. When enabled, *rtpengine* translates DTMF event packets to in-band DTMF audio by generating DTMF tones and injecting them into the audio stream, and translates in-band DTMF tones by running the audio stream through a DSP, and generating DTMF event packets when a DTMF tone is detected. Support for DTMF transcoding can be enabled in one of two ways: * In the forward direction, DTMF transcoding is enabled by adding the codec `telephone-event` to the list of codecs offered for transcoding. Specifically, if the incoming SDP body doesn't yet list `telephone-event` as a supported codec, adding the option *codec โ†’ transcode โ†’ telephone-event* would enable DTMF transcoding. The receiving RTP client can then accept this codec and start sending DTMF event packets, which *rtpengine* would translate into in-band DTMF audio. If the receiving RTP client also offers `telephone-event` in their behalf, *rtpengine* would then detect in-band DTMF audio coming from the originating RTP client and translate it to DTMF event packets. * In the reverse direction, DTMF transcoding is enabled by adding the option `always transcode` to the `flags` if the incoming SDP body offers `telephone-event` as a supported codec. If the receiving RTP client then rejects the offered `telephone-event` codec, DTMF transcoding is then enabled and is performed in the same way as described above. Enabling DTMF transcoding (in one of the two ways described above) implicitly enables the flag `always transcode` for the call and forces all of the audio to pass through the transcoding engine. Therefore, for performance reasons, this should only be done when really necessary. T.38 ---- *Rtpengine* can translate between fax endpoints that speak T.38 over UDPTL and fax endpoints that speak T.30 over regular audio channels. Any audio codec can theoretically be used for T.30 transmissions, but codecs that are too compressed will make the fax transmission fail. The most commonly used audio codecs for fax are the G.711 codecs (`PCMU` and `PCMA`), which are the default codecs *rtpengine* will use in this case if no other codecs are specified. For further information, see the section on the `T.38` dictionary key below. AMR and AMR-WB -------------- As AMR supports dynamically adapting the encoder bitrate, as well as restricting the available bitrates, there are some slight peculiarities about its usage when transcoding. When setting the bitrate, for example as `AMR-WB/16000/1/23850` in either the `codec-transcode` or the `codec-set` options, that bitrate will be used as the highest permitted bitrate for the encoder. If no `mode-set` parameter is communicated in the SDP, then that is the bitrate that will be used. If a `mode-set` is present, then the highest bitrate from that mode set which is lower or equal to the given bitrate will be used. If only higher bitrates are allowed by the mode set, then the next higher bitrate will be used. To produce an SDP that includes the `mode-set` option (when adding AMR to the codec list via `codec-transcode`), the full format parameter string can be appended to the codec specification, e.g. `codec-transcode-AMR-WB/16000/1/23850//mode-set=0,1,2,3,4,5;octet-align=1`. In this example, the bitrate 23850 won't actually be used, as the highest permitted mode is 5 (18250 bps) and so that bitrate will be used. If a literal `=` cannot be used due to parsing constraints (i.e. being wrongly interpreted as a key-value pair), it can be escaped by using two dashes instead, e.g. `codec-transcode-AMR-WB/16000/1/23850//mode-set--0,1,2,3,4,5;octet-align--1` The default (highest) bitrates for AMR and AMR-WB are 6700 and 14250, respectively. If a Codec Mode Request (CMR) is received from the AMR peer, then *rtpengine* will adhere to the request and switch encoder bitrate unconditionally, even if it's a higher bitrate than originally desired. To enable sending CMRs to the AMR peer, the codec-specific option `CMR-interval` is provided. It takes a number of milliseconds as argument. Throughout each interval, *rtpengine* will track which AMR frame types were received from the peer, and then based on that will make a decision at the end of the interval. If a higher bitrate is allowed by the mode set that was not received from the AMR peer at all, then *rtpengine* will request switching to that bitrate per CMR. Only the next-highest bitrate mode that was not received will ever be requested, and a CMR will be sent only once per interval. Full example to specify a CMR interval of 500 milliseconds (with `=` escapes): `codec-transcode-AMR-WB/16000/1/23850//mode-set--0,1,2/CMR-interval--500` Similar to the `CMR-interval` option, *rtpengine* can optionally attempt to periodically increase the outgoing bitrate without being requested to by the peer via a CMR. To enable this, set the option `mode-change-interval` to the desired interval in milliseconds. If the last CMR from the AMR peer was longer than this interval ago, *rtpengine* will increase the bitrate by one step if possible. Afterwards, the interval starts over. EVS --- Enhanced Voice Services (EVS) is a patent-encumbered codec for which (at the time of writing) no implementation exists which can be freely used and distributed. As such, support for EVS is only available if an implementation is supplied separately. Currently the only implementation supported is the ETSI/3GPP reference implementation (either floating-point or fixed-point). Any licensing issues that might result from such usage are the responsibility of the user of this software. The EVS codec implementation can be provided as a shared object library (*.so*) which is loaded in during runtime (at startup). The supported implementations can be seen as subdirectories within the `evs/` directory. Currently supported are version 17.0.0 of the ETSI/3GPP reference implementation, [*126.442*](https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1464) for the fixed-point implementation and [*126.443*](https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1465) for the floating-point implementation. (The floating-point implementation seems to be significantly faster, but is not bit-precise.) To supply the codec implementation as a shared object during runtime, extract the reference implementation's *.zip* file and apply the provided `patch` ([from here](https://github.com/sipwise/rtpengine/tree/master/evs)) that is appropriate for the chosen implementation. Run the build using `make` (suggested build flags are `RELEASE=1 make`) and it should produce a file `lib3gpp-evs.so`. Point *rtpengine* to this file using the `evs-lib-path=` option to enable support for EVS. Call recording ============== Call recording can be accomplished in one of two ways: * The *rtpengine* daemon can write `libpcap`-formatted captures directly (`--recording-method=pcap`); * The *rtpengine* daemon can write audio frames into a sink in `/proc/rtpengine` (`--recording-method=proc`). These frames must then be consumed within a short period by another process; while this can be any process, the packaged `rtpengine-recording` daemon is a useful ready implementation of a call recording solution. The recording daemon uses `ffmpeg` libraries to implement a variety of on-the-fly format conversion and mixing options, as well as metadata logging. See `rtpengine-recording -h` for details. **Important note**: The *rtpengine* daemon emits data into a "spool directory" (`--recording-dir` option), by default `/var/spool/rtpengine`. The recording daemon is then configured to consume this using the `--spool-dir` option, and to store the final emitted recordings (in whatever desired target format, etc.) in `--output-dir`. Ensure that the `--spool-dir` and the `--output-dir` are **different** directories, or you will run into problems (as discussed in [#81](https://github.com/sipwise/rtpengine/issues/808)). The *ng* Control Protocol ========================= In order to enable several advanced features in *rtpengine*, a new advanced control protocol has been devised which passes the complete SDP body from the SIP proxy to the *rtpengine* daemon, has the body rewritten in the daemon, and then passed back to the SIP proxy to embed into the SIP message. This control protocol is supported over a number of different transports (plain UDP, plain TCP, HTTP, WebSocket) and loosely follows the same format as used by *Kamailio*'s *rtpproxy* module. Each message passed between the SIP proxy and the media proxy contains of two parts: a unique message cookie and a dictionary document, separated by a single space. The message cookie is used to match requests to responses and to detect retransmissions. The message cookie in the response generated to a particular request therefore must be the same as in the request. The dictionary document can be in one of two formats. It can be a JSON object or it can be a dictionary in [bencode](http://en.wikipedia.org/wiki/Bencode) format. *Bencoding* supports a subset of the features of JSON (dictionaries/hashes, lists/arrays, arbitrary byte strings) but offers some benefits over JSON encoding, e.g. simpler and more efficient encoding, less encoding overhead, deterministic encoding and faster encoding and decoding. Disadvantages compared to JSON are that it's not a readily human readable format and that support in programming languages might be difficult to come by. Internally *rtpengine* uses *bencoding* natively, leading to additional overhead when JSON is in use as it has to be converted. The dictionary of each request must contain at least one key called `command`. The corresponding value must be a string and determines the type of message. Currently the following commands are defined: * ping * offer * answer * delete * query * start recording * stop recording * block DTMF * unblock DTMF * block media * unblock media * silence media * unsilence media * start forwarding * stop forwarding * play media * stop media * play DTMF * statistics * publish * subscribe request * subscribe answer * unsubscribe The response dictionary must contain at least one key called `result`. The value can be either `ok` or `error`. For the `ping` command, the additional value `pong` is allowed. If the result is `error`, then another key `error-reason` must be given, containing a string with a human-readable error message. No other keys should be present in the error case. If the result is `ok`, the optional key `warning` may be present, containing a human-readable warning message. This can be used for non-fatal errors. For readability, all data objects below are represented in a JSON-like notation and without the message cookie. For example, a `ping` message and its corresponding `pong` reply would be written as: { "command": "ping" } { "result": "pong" } While the actual messages as encoded on the wire, including the message cookie, might look like this in *bencode* format: 5323_1 d7:command4:pinge 5323_1 d6:result4:ponge All keys and values are case-sensitive unless specified otherwise. The requirement stipulated by the *bencode* standard that dictionary keys must be present in lexicographical order is not currently honoured. The *ng* protocol is used by *Kamailio*'s *rtpengine* module, which is based on the older module called *rtpproxy-ng*, and utilises *bencoding* and the UDP transport by default, or alternatively WebSocket if so configured. Of course the agent controlling *rtpengine* via the *ng* protocol does not have to be a SIP proxy. Any process that involves SDP can potentially talk to *rtpengine* via this protocol. `ping` Message -------------- The request dictionary contains no other keys and the reply dictionary also contains no other keys. The only valid value for `result` is `pong`. `offer` Message --------------- The request dictionary must contain at least the following keys: * `sdp` Contains the complete SDP body as string. * `call-id` The SIP call ID as string. * `from-tag` The SIP `From` tag as string. Optionally included keys are: * `from-tags` Contains a list of strings used to selected multiple existing call participants (e.g. for the `subscribe request` message). An alternative way to list multiple tags is by putting them into the `flags` list, each prefixed with `from-tags-`. * `via-branch` The SIP `Via` branch as string. Used to additionally refine the matching logic between media streams and calls and call branches. * `label` or `from-label` A custom free-form string which *rtpengine* remembers for this participating endpoint and reports back in logs and statistics output. For some commands (e.g. `block media`) the given label is not used to set the label of the call participant, but rather to select an existing call participant. * `set-label` Some commands (e.g. `block media`) use the given `label` to select an existing call participant. For these commands, `set-label` instead of `label` can be used to set the label at the same time, either for the selected call participant (if selected via `from-tag`) or for the newly created participant (e.g. for `subscribe request`). * `to-label` Commands that allow selection of two call participants (e.g. `block media`) can use `label` instead of `from-tag` to select the first call participant. The `to-label` can then be used instead of `to-tag` to select the other call participant. For `subscribe request` the `to-label` is synonymous with `set-label`. * `flags` The value of the `flags` key is a list. The list contains zero or more of the following strings. Spaces in each string may be replaced by hyphens. - `SIP source address` Ignore any IP addresses given in the SDP body and use the source address of the received SIP message (given in `received from`) as default endpoint address. This was the default behaviour of older versions of *rtpengine* and can still be made the default behaviour through the `--sip-source` CLI switch. Can be overridden through the `media address` key. - `trust address` The opposite of `SIP source address`. This is the default behaviour unless the CLI switch `--sip-source` is active. Corresponds to the *rtpproxy* `r` flag. Can be overridden through the `media address` key. - `symmetric` Corresponds to the *rtpproxy* `w` flag. Not used by *rtpengine* as this is the default, unless `asymmetric` is specified. - `asymmetric` Corresponds to the *rtpproxy* `a` flag. Advertises an RTP endpoint which uses asymmetric RTP, which disables learning of endpoint addresses (see below). - `unidirectional` When this flag is present, kernelize also one-way rtp media. - `strict source` Normally, *rtpengine* attempts to learn the correct endpoint address for every stream during the first few seconds after signalling by observing the source address and port of incoming packets (unless `asymmetric` is specified). Afterwards, source address and port of incoming packets are normally ignored and packets are forwarded regardless of where they're coming from. With the `strict source` option set, *rtpengine* will continue to inspect the source address and port of incoming packets after the learning phase and compare them with the endpoint address that has been learned before. If there's a mismatch, the packet will be dropped and not forwarded. - `media handover` Similar to the `strict source` option, but instead of dropping packets when the source address or port don't match, the endpoint address will be re-learned and moved to the new address. This allows endpoint addresses to change on the fly without going through signalling again. Note that this opens a security hole and potentially allows RTP streams to be hijacked, either partly or in whole. - `reset` This causes *rtpengine* to un-learn certain aspects of the RTP endpoints involved, such as support for ICE or support for SRTP. For example, if `ICE=force` is given, then *rtpengine* will initially offer ICE to the remote endpoint. However, if a subsequent answer from that same endpoint indicates that it doesn't support ICE, then no more ICE offers will be made towards that endpoint, even if `ICE=force` is still specified. With the `reset` flag given, this aspect will be un-learned and *rtpengine* will again offer ICE to this endpoint. This flag is valid only in an `offer` message and is useful when the call has been transferred to a new endpoint without change of `From` or `To` tags. - `port latching` Forces *rtpengine* to retain its local ports during a signalling exchange even when the remote endpoint changes its port. - `no port latching` Port latching is enabled by default for endpoints which speak ICE. With this option preset, a remote port change will result in a local port change even for endpoints which speak ICE, which will imply an ICE restart. - `record call` Identical to setting `record call` to `on` (see below). - `no rtcp attribute` Omit the `a=rtcp` line from the outgoing SDP. - `full rtcp attribute` Include the full version of the `a=rtcp` line (complete with network address) instead of the short version with just the port number. - `loop protect` Inserts a custom attribute (`a=rtpengine:...`) into the outgoing SDP to prevent *rtpengine* processing and rewriting the same SDP multiple times. This is useful if your setup involves signalling loops and need to make sure that *rtpengine* doesn't start looping media packets back to itself. When this flag is present and *rtpengine* sees a matching attribute already present in the SDP, it will leave the SDP untouched and not process the message. - `always transcode` Legacy flag, synonymous to `codec-accept=all`. - `single codec` Using this flag in an `answer` message will leave only the first listed codec in place and will remove all others from the list. Useful for RTP clients which get confused if more than one codec is listed in an answer. - `reuse codecs` or `no codec renegotiation` Instructs *rtpengine* to prevent endpoints from switching codecs during call run-time if possible. Codecs that were listed as preferred in the past will be kept as preferred even if the re-offer lists other codecs as preferred, or in a different order. Recommended to be combined with `single codec`. - `allow transcoding` This flag is only useful in commands that provide an explicit answer SDP to *rtpengine* (e.g. `subscribe answer`). For these commands, if the answer SDP does not accept all codecs that were offered, the default behaviour is to reject the answer. With this flag given, the answer will be accepted even if some codecs were rejected, and codecs will be transcoded as required. - `all` Synonymous to `all=all` (see below). - `pad crypto` Legacy alias to SDES=pad. - `generate mid` Add `a=mid` attributes to the outgoing SDP if they were not already present. - `strip extmap` Remove `a=rtpmap` attributes from the outgoing SDP. - `original sendrecv` With this flag present, *rtpengine* will leave the media direction attributes (`sendrecv`, `recvonly`, `sendonly`, and `inactive`) from the received SDP body unchanged. Normally *rtpengine* would consume these attributes and insert its own version of them based on other media parameters (e.g. a media section with a zero IP address would come out as `sendonly` or `inactive`). - `inject DTMF` Signals to *rtpengine* that the audio streams involved in this `offer` or `answer` (the flag should be present in both of them) are to be made available for DTMF injection via the `play DTMF` control message. See `play DTMF` below for additional information. - `detect DTMF` When present in a message that sets up codec handlers, enables the DSP to detect in-band DTMF audio tones even when it wouldn't otherwise be necessary. - `generate RTCP` Identical to setting `generate RTCP = on`. - `RTCP mirror` Useful only for `subscribe request` message. Instructs *rtpengine* to not only create a one-way subscription for both RTP and RTCP from the source to the sink, but also create a reverse subscription for RTCP only from the sink back to the source. This makes it possible for the media source to receive feedback from all media receivers (sinks). - `debug` or `debugging` Enabled full debug logging for this call, regardless of global log level settings. - `pierce NAT` Sends empty UDP packets to the remote RTP peer as soon as an endpoint address is available from a received SDP, for as long as no incoming packets have been received. Useful to create an initial NAT mapping. Not needed when ICE is in use. - `NAT-wait` Prevents forwarding media packets to the respective endpoint until at least one media packet has been received from that endpoint. This is to allow a NAT binding to open in the ingress direction before sending packets out, which could result in an automated firewall block. - `trickle ICE` Useful for `offer` messages when ICE is advertised to also advertise support for trickle ICE. - `reject ICE` Useful for `offer` messages that advertise support for ICE. Instructs *rtpengine* to reject the offered ICE. This is similar to using `ICE=remove` in the respective `answer`. * `generate RTCP` Contains a string, either `on` or `off`. If enabled for a call, received RTCP packets will not simply be passed through as usual, but instead will be consumed, and instead *rtpengine* will generate its own RTCP packets to send to the RTP peers. This flag will be effective for both sides of a call. * `replace` Similar to the `flags` list. Controls which parts of the SDP body should be rewritten. Contains zero or more of: - `origin` Replace the address found in the *origin* (o=) line of the SDP body. Corresponds to *rtpproxy* `o` flag. - `session connection` or `session-connection` Replace the address found in the *session-level connection* (c=) line of the SDP body. Corresponds to *rtpproxy* `c` flag. - `SDP version` or `SDP-version` Take control of the version field in the SDP and make sure it's increased every time the SDP changes, and left unchanged if the SDP is the same. - `force-increment-sdp-ver` Force increasing the SDP version, even if the SDP hasn't been changed. - `username` Take control of the origin username field in the SDP. With this option in use, *rtpengine* will make sure the username field in the `o=` line always remains the same in all SDPs going to a particular RTP endpoint. - `session name` or `session-name` Same as `username` but for the entire contents of the `s=` line. - `zero address` Using a zero endpoint address is an obsolete way to signal a muted or sendonly stream. Streams with zero addresses are normally flagged as sendonly and the zero address in the SDP is passed through. With this option set, the zero address is replaced with a real address. * `direction` Contains a list of two strings and corresponds to the *rtpproxy* `e` and `i` flags. Each element must correspond to one of the named logical interfaces configured on the command line (through `--interface`). For example, if there is one logical interface named `pub` and another one named `priv`, then if side A (originator of the message) is considered to be on the private network and side B (destination of the message) on the public network, then that would be rendered within the dictionary as: { ..., "direction": [ "priv", "pub" ], ... } This only needs to be done for an initial `offer`; for the `answer` and any subsequent offers (between the same endpoints) *rtpengine* will remember the selected network interface. As a special case to support legacy usage of this option, if the given interface names are `internal` or `external` and if no such interfaces have been configured, then they're understood as selectors between IPv4 and IPv6 addresses. However, this mechanism for selecting the address family is now obsolete and the `address family` dictionary key should be used instead. For legacy support, the special direction keyword `round-robin-calls` can be used to invoke the round-robin interface selection algorithm described in the section *Interfaces configuration*. If this special keyword is used, the round-robin selection will run over all configured interfaces, whether or not they are configured using the `BASE:SUFFIX` interface name notation. This special keyword is provided only for legacy support and should be considered obsolete. It will be removed in future versions. * `interface` Contains a single string naming one of the configured interfaces, just like `direction` does. The `interface` option is used instead of `direction` where only one interface is required (e.g. outside of an offer/answer scenario), for example in the `publish` or `subscribe request` commands. * `received from` Contains a list of exactly two elements. The first element denotes the address family and the second element is the SIP message's source address itself. The address family can be one of `IP4` or `IP6`. Used if SDP addresses are neither trusted (through `SIP source address` or `--sip-source`) nor the `media address` key is present. * `drop-traffic` Contains a string, valid values are `start` or `stop`. `start` signals to *rtpengine* that all RTP involved in this call is dropped. Can be present either in `offer` or `answer`, the behavior is for the entire call. `stop` signals to *rtpengine* that all RTP involved in this call is NOT dropped anymore. Can be present either in `offer` or `answer`, the behavior is for the entire call. `stop` has priority over `start`, if both are present. * `ICE` Contains a string which must be one of the following values: With `remove`, any ICE attributes are stripped from the SDP body. Also see the flag `reject ICE` to effect an early removal of ICE support during an `offer`. With `force`, ICE attributes are first stripped, then new attributes are generated and inserted, which leaves the media proxy as the only ICE candidate. With `default`, the behaviour will be the same as with `force` if the incoming SDP already had ICE attributes listed. If the incoming SDP did not contain ICE attributes, then no ICE attributes are added. With `force-relay`, existing ICE candidates are left in place except `relay` type candidates, and *rtpengine* inserts itself as a `relay` candidate. It will also leave SDP c= and m= lines unchanged. With `optional`, if no ICE attributes are present, a new set is generated and the media proxy lists itself as ICE candidate; otherwise, the media proxy inserts itself as a low-priority candidate. This used to be the default behaviour in previous versions of *rtpengine*. The default behaviour (no `ICE` key present at all) is the same as `default`. This flag operates independently of the `replace` flags. Note that if config parameter `save-interface-ports = true`, ICE will be broken, because rtpengine will bind ports only on the first local interface of desired family of logical interface. * `ICE-lite` Contains a string which must be one of the following values: - `forward` to enable "ICE lite" mode towards the peer that this offer is sent to. - `backward` to enable "ICE lite" mode towards the peer that has sent this offer. - `both` to enable "ICE lite" towards both peers. - `off` to disable "ICE lite" towards both peers and revert to full ICE support. The default (keyword not present at all) is to use full ICE support, or to leave the previously set "ICE lite" mode unchanged. This keyword is valid in `offer` messages only. * `transport protocol` The transport protocol specified in the SDP body is to be rewritten to the string value given here. The media proxy will expect to receive this protocol on the allocated ports, and will talk this protocol when sending packets out. Translation between different transport protocols will happen as necessary. Valid values are: `RTP/AVP`, `RTP/AVPF`, `RTP/SAVP`, `RTP/SAVPF`. Additionally the string `accept` can be given in `answer` messages to allow a special case: By default (when no `transport-protocol` override is given) in answer messages, *rtpengine* will use the transport protocol that was originally offered. However, an answering client may answer with a different protocol than what was offered (e.g. offer was for `RTP/AVP` and answer comes with `RTP/AVPF`). The default behaviour for *rtpengine* is to ignore this protocol change and still proceed with the protocol that was originally offered. Using the `accept` option here tells *rtpengine* to go along with this protocol change and pass it to the original offerer. * `media address` This can be used to override both the addresses present in the SDP body and the `received from` address. Contains either an IPv4 or an IPv6 address, expressed as a simple string. The format must be dotted-quad notation for IPv4 or RFC 5952 notation for IPv6. It's up to the RTP proxy to determine the address family type. * `address family` A string value of either `IP4` or `IP6` to select the primary address family in the substituted SDP body. The default is to auto-detect the address family if possible (if the receiving end is known already) or otherwise to leave it unchanged. * `rtcp-mux` A list of strings controlling the behaviour regarding rtcp-mux (multiplexing RTP and RTCP on a single port, RFC 5761). The default behaviour is to go along with the client's preference. The list can contain zero of more of the following strings. Note that some of them are mutually exclusive. - `offer` Instructs *rtpengine* to always offer rtcp-mux, even if the client itself doesn't offer it. - `require` Similar to `offer` but pretends that the receiving client has already accepted rtcp-mux. The effect is that no separate RTCP ports will be advertised, even in an initial offer (which is against RFC 5761). This option is provided to talk to WebRTC clients. - `demux` If the client is offering rtcp-mux, don't offer it to the other side, but accept it back to the offering client. - `accept` Instructs *rtpengine* to accept rtcp-mux and also offer it to the other side if it has been offered. - `reject` Reject rtcp-mux if it has been offered. Can be used together with `offer` to achieve the opposite effect of `demux`. * `TOS` Contains an integer. If present, changes the TOS value for the entire call, i.e. the TOS value used in outgoing RTP packets of all RTP streams in all directions. If a negative value is used, the previously used TOS value is left unchanged. If this key is not present or its value is too large (256 or more), then the TOS value is reverted to the default (as per `--tos` command line). * `DTLS` Contains a string and influences the behaviour of DTLS-SRTP. Possible values are: - `off` or `no` or `disable` Prevents *rtpengine* from offering or acceping DTLS-SRTP when otherwise it would. The default is to offer DTLS-SRTP when encryption is desired and to favour it over SDES when accepting an offer. - `passive` Instructs *rtpengine* to prefer the passive (i.e. server) role for the DTLS handshake. The default is to take the active (client) role if possible. This is useful in cases where the SRTP endpoint isn't able to receive or process the DTLS handshake packets, for example when it's behind NAT or needs to finish ICE processing first. - `active` Reverts the `passive` setting. Only useful if the `dtls-passive` config option is set. * `DTLS-reverse` Contains a string and influences the behaviour of DTLS-SRTP. Unlike the regular `DTLS` flag, this one is used to control behaviour towards DTLS that was offered to *rtpengine*. In particular, if `passive` mode is used, it prevents *rtpengine* from prematurely sending active DTLS connection attempts. Possible values are: - `passive` Instructs *rtpengine* to prefer the passive (i.e. server) role for the DTLS handshake. The default is to take the active (client) role if possible. This is useful in cases where the SRTP endpoint isn't able to receive or process the DTLS handshake packets, for example when it's behind NAT or needs to finish ICE processing first. - `active` Reverts the `passive` setting. Only useful if the `dtls-passive` config option is set. * `DTLS-fingerprint` Contains a string and is used to select the hashing function to generate the DTLS fingerprint from the certificate. The default is SHA-256, or the same hashing function as was used by the peer. Available are `SHA-1`, `SHA-224`, `SHA-256`, `SHA-384`, and `SHA-512`. * `SDES` A list of strings controlling the behaviour regarding SDES. The default is to offer SDES without any session parameters when encryption is desired, and to accept it when DTLS-SRTP is unavailable. If two SDES endpoints are connected to each other, then the default is to offer SDES with the same options as were received from the other endpoint. Additionally, all other supported SDES crypto suites are added to the outgoing offer by default. These options can also be put into the `flags` list using a prefix of `SDES-`. All options controlling SDES session parameters can be used either in all lower case or in all upper case. - `off` or `no` or `disable` Prevents *rtpengine* from offering SDES, leaving DTLS-SRTP as the other option. - `unencrypted_srtp`, `unencrypted_srtcp` and `unauthenticated_srtp` Enables the respective SDES session parameter (see section 6.3 or RFC 4568). The default is to copy these options from the offering client, or not to have them enabled if SDES wasn't offered. - `encrypted_srtp`, `encrypted_srtcp` and `authenticated_srtp` Negates the respective option. This is useful if one of the session parameters was offered by an SDES endpoint, but it should not be offered on the far side if this endpoint also speaks SDES. - `no-`*SUITE* Exclude individual crypto suites from being included in the offer. For example, `no-NULL_HMAC_SHA1_32` would exclude the crypto suite `NULL_HMAC_SHA1_32` from the offer. This has two effects: if a given crypto suite was present in a received offer, it will be removed and will be missing in the outgoing offer; and if a given crypto suite was not present in the received offer, it will not be added to it. *Remark: if after applying the policies to the processed offer, there are no crypto suites left,* *which can be used later in the answer towards the offerer, then RTPEngine will intentionally* *leave the top most one offered, for the answer towards the originator.* *However it will be not used for the recipient.* - `only-`*SUITE* Add only these individual crypto suites and none of the others. For example, `only-NULL_HMAC_SHA1_32` would only accept the crypto suite `NULL_HMAC_SHA1_32` for the offer being generated. This takes precedence over the `SDES-no-` flag(s), if used together, so the `SDES-no` will be not taken into account. This has two effects: if a given crypto suite was present in a received offer, it will be kept, so will be present in the outgoing offer; and if a given crypto suite was not present in the received offer, it will be added to it. The rest, which is not mentioned, will be dropped/not added. *Remark: if after applying the policies to the processed offer, there are no crypto suites left,* *which can be used later in the answer towards the offerer, then RTPEngine will intentionally* *leave the top most one offered, for the answer towards the originator.* *However it will be not used for the recipient.* - `nonew` Don't add any new crypto suites into the offer. This means, offered SDES crypto suites will accepted, meanwhile no new is going to be generated by RTPEngine. It takes precedence over the `SDES-no` and `SDES-only` flags, if used in combination. - `order:`*SUITES LIST* The order, in which crypto suites are being added to the SDP. Example: `SDES-order:AES_256_CM_HMAC_SHA;AES_256_CM_HMAC_SHA1_32;AES_192_CM_HMAC_SHA1_80;`, this means โ€” those listed SDES crypto suites will be added into the generated SDP body at the top of crypto suites list, in the given order. But, each of them is added, only if it is about to be added/generated. In other words, the `SDES-order:` flag itself doesn't add crypto suites, it just affects the order of those suites to be added. And the rest of non-mentioned suites (not mentioned in the `SDES-order:` list), which are also to be added, will be appended after those given, in the free manner of ordering. Important thing to remember - it doesn't change the crypto suite tag for the recipient, even though changing the order of them. This flag does not contradict with `SDES-nonew`, `SDES-only-` and `SDES-no-` flags. It just orders the list of crypto suites already prepared to be sent out. - `pad` RFC 4568 (section 6.1) is somewhat ambiguous regarding the base64 encoding format of `a=crypto` parameters added to an SDP body. The default interpretation is that trailing `=` characters used for padding should be omitted. With this flag set, these padding characters will be left in place. - `lifetime` Add the key lifetime parameter `2^31` to each crypto key. - `static` Instructs *rtpengine* to skip the full SDES negotiation routine during a re-invite (e.g. pick the first support crypto suite, look for possible SRTP passthrough) and instead leave the previously negotiated crypto suite in place. Only useful in subsequent `answer` messages and ignored in `offer` messages. * `OSRTP` Similar to `SDES` but controls OSRTP behaviour. Default behaviour is to pass through OSRTP negotiations. Supported options: - `offer` When processing a non-OSRTP offer, convert it to an OSRTP offer. Will result in RTP/SRTP transcoding if the OSRTP offer is accepted. - `accept` When processing a non-OSRTP answer in response to an OSRTP offer, accept the OSRTP offer anyway. Results in RTP/SRTP transcoding. * `endpoint-learning` Contains one of the strings `off`, `immediate`, `delayed` or `heuristic`. This tells rtpengine which endpoint learning algorithm to use and overrides the `endpoint-learning` configuration option. This option can also be put into the `flags` list using a prefix of `endpoint-learning-`. * `record call` Contains one of the strings `yes`, `no`, `on` or `off`. This tells the rtpengine whether or not to record the call to PCAP files. If the call is recorded, it will generate PCAP files for each stream and a metadata file for each call. Note that rtpengine *will not* force itself into the media path, and other flags like `ICE=force` may be necessary to ensure the call is recorded. See the `--recording-dir` option above. Enabling call recording via this option has the same effect as doing it separately via the `start recording` message, except that this option guarantees that the entirety of the call gets recorded, including all details such as SDP bodies passing through *rtpengine*. * `metadata` This is a generic metadata string. The metadata will be written to the bottom of metadata files within `/path/to/recording_dir/metadata/` or to `recording_metakeys` table. In the latter case, `metadata` string must contain a list of `key:val` pairs separated by `|` character. `metadata` can be used to record additional information about recorded calls. `metadata` values passed in through subsequent messages will overwrite previous metadata values. See the `--recording-dir` option above. * `codec` Contains a dictionary controlling various aspects of codecs (or RTP payload types). These options can also be put into the `flags` list using a prefix of `codec-`. For example, to set the codec options for two variants of Opus when they're implicitly accepted, (see the example under `set`), one would put the following into the `flags` list: `codec-set-opus/48000/1/16000` `codec-set-opus/48000/2/32000` The following keys are understood: * `strip` Contains a list of strings. Each string is the name of a codec or RTP payload type that should be removed from the SDP. Codec names are case sensitive, and can be either from the list of codecs explicitly defined by the SDP through an `a=rtpmap` attribute, or can be from the list of RFC-defined codecs. Examples are `PCMU`, `opus`, or `telephone-event`. Codecs stripped using this option are treated as if they had never been in the SDP. It is possible to specify codec format parameters alongside with the codec name in the same format as they're written in SDP for codecs that support them, for example `opus/48000` to specify Opus with 48 kHz sampling rate and one channel (mono), or `opus/48000/2` for stereo Opus. If any format parameters are specified, the codec will only be stripped if all of the format parameters match, and other instances of the same codec with different format parameters will be left untouched. As a special keyword, `all` can be used to remove all codecs, except the ones that should explicitly offered (see below). Note that it is an error to strip all codecs and leave none that could be offered. In this case, the original list of codecs will be left unchanged. The keyword `full` can also be used, which behaves the same as `all` with the exception listed under `transcode` below. * `except` Contains a list of strings. Each string is the name of a codec that should be included in the list of codecs offered. This is primarily useful to block all codecs (`strip -> all` or `mask -> all`) except the ones given in the `except` whitelist. Codecs that were not present in the original list of codecs offered by the client will be ignored. This list also supports codec format parameters as per above. * `offer` This is identical to `except` but additionally allows the codec order to be changed. So the first codec listed in `offer` will be the primary (preferred) codec in the output SDP, even if it wasn't originally so. * `transcode` Similar to `offer` but allows codecs to be added to the list of offered codecs even if they were not present in the original list of codecs. In this case, the transcoding engine will be engaged. Only codecs that are supported for both decoding and encoding can be added in this manner. This also has the side effect of automatically stripping all unsupported codecs from the list of offered codecs, as *rtpengine* must expect to receive or even send in any codec that is present in the list. Note that using this option does not necessarily always engage the transcoding engine. If all codecs given in the `transcode` list were present in the original list of offered codecs, then no transcoding will be done. Also note that if transcoding takes place, in-kernel forwarding is disabled for this media stream and all processing happens in userspace. If no codec format parameters are specified in this list (e.g. just `opus` instead of `opus/48000/2`), default values will be chosen for them. For codecs that support different bitrates, it can be specified by appending another slash followed by the bitrate in bits per second, e.g. `opus/48000/2/32000`. In this case, all format parameters (clock rate, channels) must also be specified. Additional options that can be appended to the codec string with additional slashes are ptime, the `fmtp` string, and additional codec-specific options. For example `iLBC/8000/1///mode=30` to use `mode=30` as `fmtp` string. For Opus, the string of codec-specific options is passed directly to ffmpeg, so all ffmpeg codec options can be set. Use space, colon, semicolon, or comma to separate individual options. For example to set the encoding complexity (also known as compression level by ffmpeg): `opus/48000/2////compression_level=2` If a literal `=` cannot be used due to parsing constraints (i.e. being wrongly interpreted as a key-value pair), it can be escaped by using two dashes instead, e.g. `iLBC/8000/1///mode--30`. As a special case, if the `strip=all` or `mask=all` option has been used and the `transcode` option is used on a codec that was originally present in the offer, then *rtpengine* will treat this codec the same as if it had been used with the `offer` option, i.e. it will simply restore it from the list of stripped codecs and won't actually engage transcoding for this codec. On the other hand, if a codec has been stripped explicitly by name using the `strip` or `mask` option and then used again with the `transcode` option, then the codec will not simply be restored from the list of stripped codecs, but instead a new transcoded instance of the codec will be inserted into the offer. (This special exception does not apply to `mask=full` or `strip=full`.) This option is only processed in `offer` messages and ignored otherwise. * `mask` Similar to `strip` except that codecs listed here will still be accepted and used for transcoding on the offering side. Useful only in combination with `transcode`. For example, if an offer advertises Opus and the options `mask=opus, transcode=G723` are given, then the rewritten outgoing offer will contain only G.723 as offered codec, and transcoding will happen between Opus and G.723. In contrast, if only `transcode=G723` were given, then the rewritten outgoing offer would contain both Opus and G.723. On the other hand, if `strip=opus, transcode=G723` were given, then Opus would be unavailable for transcoding. As with the `strip` option, the special keywords `all` and `full` can be used to mask all codecs that have been offered. This option is only processed in `offer` messages and ignored otherwise. * `consume` Identical to `mask` but enables the transcoding engine even if no other transcoding related options are given. * `accept` Similar to `mask` and `consume` but doesn't remove the codec from the list of offered codecs. This means that a codec listed under `accept` will still be offered to the remote peer, but if the remote peer rejects it, it will still be accepted towards the original offerer and then used for transcoding. It is a more selective version of what the `always transcode` flag does. The special string `any` can be used for the `publish` message. See below for more details. * `set` Contains a list of strings. This list makes it possible to set codec options (bitrate in particular) for codecs that are implicitly accepted for transcoding. For example, if `AMR` was offered, `transcode=PCMU` was given, and the remote ended up accepting `PCMU`, then this option can be used to set the bitrate used for the AMR transcoding process. Each string must be a full codec specification as per above, including clock rate and number of channels. Using the example above, `set=AMR/8000/1/7400` can be used to transcode to AMR with 7.4 kbit/s. Codec options (bitrate) are only applied to codecs that match the given parameters (clock rate, channels), and multiple options can be given for the same coded with different parameters. For example, to specify different bitrates for Opus for both mono and stereo output, one could use `set=[opus/48000/1/16000,opus/48000/2/32000]`. This option is only processed in `offer` messages and ignored otherwise. * `ptime` Contains an integer. If set, changes the `a=ptime` attribute's value in the outgoing SDP to the provided value. It also engages the transcoding engine for supported codecs to provide repacketization functionality, even if no additional codec has actually been requested for transcoding. Note that not all codecs support all packetization intervals. The selected ptime (which represents the duration of a single media packet in milliseconds) will be used towards the endpoint receiving this offer, even if the matching answer prefers a different ptime. This option is ignored in `answer` messages. See below for the reverse. * `ptime-reverse` This is the reciprocal to `ptime`. It sets the ptime to be used towards the endpoint who has sent the offer. It will be inserted in the `answer` SDP. This option is also ignored in `answer` messages. * `T.38` Contains a list of strings. Each string is a flag that controls the behaviour regarding T.38 transcoding. These flags are ignored if the message is not an `offer`. Recognised flags are: - `decode` If the received SDP contains a media section with an `image` type, `UDPTL` transport, and `t38` format string, this flag instructs *rtpengine* to convert this media section into an `audio` type using RTP as transport protocol. Other transport protocols (such as SRTP) can be selected using `transport protocol` as described above. The default audio codecs to be offered are `PCMU` and `PCMA`. Other audio codecs can be specified using the `transcode=` flag described above, in which case the default codecs will not be offered automatically. - `force` If the received SDP contains an audio media section using RTP transport, this flag instructs *rtpengine* to convert it to an `image` type media section using the UDPTL protocol. The first supported audio codec that was offered will be used to transport T.30. Default options for T.38 are used for the generated SDP. - `stop` Stops a currently active T.38 gateway that was previously engaged using the `decode` or `force` flags. This is useful to handle a rejected T.38 offer and revert the session back to media passthrough. - `no-ECM` Disable support for ECM. Support is enabled by default. - `no-V.17` Disable support for V.17. Support is enabled by default. - `no-V.27ter` Disable support for V.27ter. Support is enabled by default. - `no-V.29` Disable support for V.29. Support is enabled by default. - `no-V.34` Disable support for V.34. Support is enabled by default. - `no-IAF` Disable support for IAF. Support is enabled by default. - `FEC` Use UDPTL FEC instead of redundancy. Only useful with `T.38=force` as it's a negotiated parameter. * `supports` Contains a list of strings. Each string indicates support for an additional feature that the controlling SIP proxy supports. Currently defined values are: * `load limit` Indicates support for an extension to the *ng* protocol to facilitate certain load balancing mechanisms. If *rtpengine* is configured with certain session or load limit options enabled (such as the `max-sessions` option), then normally *rtpengine* would reply with an error to an `offer` if one of the limits is exceeded. If support for the `load limit` extension is indicated, then instead of replying with an error, *rtpengine* responds with the string `load limit` in the `result` key of the response dictionary. The response dictionary may also contain the optional key `message` with an explanatory string. No other key is required in the response dictionary. * `xmlrpc-callback` Contains a string that encodes an IP address (either IPv4 or IPv6) in printable format. If specified, then this address will be used as destination address for the XMLRPC timeout callback (see `b2b-url` option). * `media echo` or `media-echo` Contains a string to enable a special media echo mode. Recognised values are: - `blackhole` or `sinkhole` Media arriving from either side of the call is simply discarded and not forwarded. - `forward` Enables media echo towards the receiver of this message (e.g. the called party if the message is an `offer` from the caller). Media arriving from that side is echoed back to its sender (with a new SSRC if it's RTP). Media arriving from the opposite side is discarded. - `backwards` Enables media echo towards the sender of this message (i.e. the opposite of `forward`). Media arriving from the other side is discarded. - `both` Enables media echo towards both the sender and the receiver of this message. * `DTMF-security` Used in the `block DTMF` message to select the DTMF blocking mode. The default mode is `drop` which simply drops DTMF event packets. The other supported modes are: `silence` which replaces DTMF events with silence audio; `tone` which replaces DTMF events with a single sine wave tone; `random` which replaces DTMF events with random other DTMF events (both in-band DTMF audio tones and RFC event packets); `zero` which is similar to `random` except that a zero event is always used; `DTMF` which is similar to `zero` except that a different DTMF digit can be specified; `off` to disable DTMF blocking. * `DTMF-security-trigger` Blocking mode to enable when the DTMF `trigger` (see below) is detected. * `DTMF-security-trigger-end` Blocking mode to enable when the DTMF `end trigger` (see below) is detected. * `trigger` A string of DTMF digits that enable a DTMF blocking mode when detected. * `end trigger` or `trigger-end` A string of DTMF digits that disable DTMF blocking or enable a different DTMF blocking mode when detected, but only after the initial enabling `trigger` has been detected. * `trigger-end-time` Time in milliseconds that a DTMF blocking mode enabled by the `trigger` should remain active the most. After the time has expired, the blocking mode is switched to the `trigger-end` mode. * `trigger-end-digits` Number of DTMF digits that a DTMF blocking mode enabled by the `trigger` should remain active the most. After this number of DTMF digits has been detected, the blocking mode is switched to the `trigger-end` mode. * `frequency` or `frequencies` Sets the tone frequency or frequencies for `DTMF-security=tone` in Hertz. The default is a single frequency of 400 Hz. A list of frequencies can be given either as a list object, or as a string containing a comma-separated list of integers. The given frequencies will be picked from the list in order, one for each DTMF event detected, and will be repeated once the end of the list is reached. * `volume` Sets the tone volume for `DTMF-security` modes `tone`, `zero, `DTMF`, and `random` in negative dB. The default is -10 dB. The highest possible volume is 0 dB and the lowest possible volume is -63 dB. * `digit` or `code` Sets the replacement digit for `DTMF-security=DTMF`. * `delay-buffer` Takes an integer as value. When set to non-zero, enables the delay buffer when setting up codec handlers. The delay buffer delays all media by the given number of milliseconds before passing it on. Once the delay buffer is configured, it must explicitly be disabled again by setting this value to zero. The delay buffer setting is honoured in all messages that set up codec handlers, such as `block DTMF`. * `DTMF-delay` Time in milliseconds to delay DTMF events (both RFC event packets and DTMF tones) for. With this option enabled (set to non-zero), DTMF events are initially replaced by silence and then subsequently reproduced after the given delay. DTMF blocking modes are honoured at the time when the DTMF events are reproduced. * `all` Can be set to the string `none` to disable any extra behaviour (which is the default if this key is omitted altogether) or to one of `all`, `offer-answer`, `except-offer-answer` or `flows`. Applicable to certain messages only. The behaviour is explained below separately for each affected message. An example of a complete `offer` request dictionary could be (SDP body abbreviated): { "command": "offer", "call-id": "cfBXzDSZqhYNcXM", "from-tag": "mS9rSAn0Cr", "sdp": "v=0\r\no=...", "via-branch": "5KiTRPZHH1nL6", "flags": [ "trust address" ], "replace": [ "origin", "session connection" ], "address family": "IP6", "received-from": [ "IP4", "10.65.31.43" ], "ICE": "force", "transport protocol": "RTP/SAVPF", "media address": "2001:d8::6f24:65b", "DTLS": "passive" } The response message only contains the key `sdp` in addition to `result`, which contains the re-written SDP body that the SIP proxy should insert into the SIP message. Example response: { "result": "ok", "sdp": "v=0\r\no=..." } `answer` Message ---------------- The `answer` message is identical to the `offer` message, with the additional requirement that the dictionary must contain the key `to-tag` containing the SIP `To` tag. It doesn't make sense to include the `direction` key in the `answer` message. The reply message is identical as in the `offer` reply. `delete` Message ---------------- The `delete` message must contain at least the keys `call-id` and `from-tag` and may optionally include `to-tag` and `via-branch`, as defined above. It may also optionally include a key `flags` containing a list of zero or more strings. The following flags are defined: * `fatal` Specifies that any non-syntactical error encountered when deleting the stream (such as unknown call-ID) shall result in an error reply (i.e. `"result": "error"`). The default is to reply with a warning only (i.e. `"result": "ok", "warning": ...`). Other optional keys are: * `delete delay` Contains an integer and overrides the global command-line option `delete-delay`. Call/branch will be deleted immediately if a zero is given. Value must be positive (in seconds) otherwise. The reply message may contain additional keys with statistics about the deleted call. Those additional keys are the same as used in the `query` reply. `list` Message -------------- The `list` command retrieves the list of currently active call-ids. This list is limited to 32 elements by default. * `limit` Optional integer value that specifies the maximum number of results (default: 32). Must be > 0. Be careful when setting big values, as the response may not fit in a UDP packet, and therefore be invalid. `query` Message --------------- The minimum requirement is the presence of the `call-id` key. Keys `from-tag` and/or `to-tag` may optionally be specified. The response dictionary contains the following keys: * `created` Contains an integer corresponding to the creation time of this call within the media proxy, expressed as seconds since the UNIX epoch. * `last signal` The last time a signalling event (offer, answer, etc) occurred. Also expressed as an integer UNIX timestamp. * `tags` Contains a dictionary. The keys of the dictionary are all the SIP tags (From-tag, To-Tag) known by *rtpengine* related to this call. One of the keys may be an empty string, which corresponds to one side of a dialogue which hasn't signalled its SIP tag yet. Each value of the dictionary is another dictionary with the following keys: - `created` UNIX timestamp of when this SIP tag was first seen by *rtpengine*. - `tag` Identical to the corresponding key of the `tags` dictionary. Provided to allow for easy traversing of the dictionary values without paying attention to the keys. - `label` The label assigned to this endpoint in the `offer` or `answer` message. - `in dialogue with` Contains the SIP tag of the other side of this dialogue. May be missing in case of a half-established dialogue, in which case the other side is represented by the null-string entry of the `tags` dictionary. - `medias` Contains a list of dictionaries, one for each SDP media stream known to *rtpengine*. The dictionaries contain the following keys: + `index` Integer, sequentially numbered index of the media, starting with one. + `type` Media type as string, usually `audio` or `video`. + `protocol` If the protocol is recognized by *rtpengine*, this string contains it. Usually `RTP/AVP` or `RTP/SAVPF`. + `flags` A list of strings containing various status flags. Contains zero of more of: `initialized`, `rtcp-mux`, `DTLS-SRTP`, `SDES`, `passthrough`, `ICE`. + `streams` Contains a list of dictionary representing the packet streams associated with this SDP media. Usually contains two entries, one for RTP and one for RTCP. The keys found in these dictionaries are listed below: + `local port` Integer representing the local UDP port. May be missing in case of an inactive stream. + `endpoint` Contains a dictionary with the keys `family`, `address` and `port`. Represents the endpoint address used for packet forwarding. The `family` may be one of `IPv4` or `IPv6`. + `advertised endpoint` As above, but representing the endpoint address advertised in the SDP body. + `crypto suite` Contains a string such as `AES_CM_128_HMAC_SHA1_80` representing the encryption in effect. Missing if no encryption is active. + `last packet` UNIX timestamp of when the last UDP packet was received on this port. + `flags` A list of strings with various internal flags. Contains zero or more of: `RTP`, `RTCP`, `fallback RTCP`, `filled`, `confirmed`, `kernelized,` `no kernel support`. + `stats` Contains a dictionary with the keys `bytes`, `packets` and `errors`. Statistics counters for this packet stream. * `totals` Contains a dictionary with two keys, `RTP` and `RTCP`, each one containing another dictionary identical to the `stats` dictionary described above. A complete response message might look like this (formatted for readability): { "totals": { "RTCP": { "bytes": 2244, "errors": 0, "packets": 22 }, "RTP": { "bytes": 100287, "errors": 0, "packets": 705 } }, "last_signal": 1402064116, "tags": { "cs6kn1rloc": { "created": 1402064111, "medias": [ { "flags": [ "initialized" ], "streams": [ { "endpoint": { "port": 57370, "address": "10.xx.xx.xx", "family": "IPv4" }, "flags": [ "RTP", "filled", "confirmed", "kernelized" ], "local port": 30018, "last packet": 1402064124, "stats": { "packets": 343, "errors": 0, "bytes": 56950 }, "advertised endpoint": { "family": "IPv4", "port": 57370, "address": "10.xx.xx.xx" } }, { "stats": { "bytes": 164, "errors": 0, "packets": 2 }, "advertised endpoint": { "family": "IPv4", "port": 57371, "address": "10.xx.xx.xx" }, "endpoint": { "address": "10.xx.xx.xx", "port": 57371, "family": "IPv4" }, "last packet": 1402064123, "local port": 30019, "flags": [ "RTCP", "filled", "confirmed", "kernelized", "no kernel support" ] } ], "protocol": "RTP/AVP", "index": 1, "type": "audio" } ], "in dialogue with": "0f0d2e18", "tag": "cs6kn1rloc" }, "0f0d2e18": { "in dialogue with": "cs6kn1rloc", "tag": "0f0d2e18", "medias": [ { "protocol": "RTP/SAVPF", "index": 1, "type": "audio", "streams": [ { "endpoint": { "family": "IPv4", "address": "10.xx.xx.xx", "port": 58493 }, "crypto suite": "AES_CM_128_HMAC_SHA1_80", "local port": 30016, "last packet": 1402064124, "flags": [ "RTP", "filled", "confirmed", "kernelized" ], "stats": { "bytes": 43337, "errors": 0, "packets": 362 }, "advertised endpoint": { "address": "10.xx.xx.xx", "port": 58493, "family": "IPv4" } }, { "local port": 30017, "last packet": 1402064124, "flags": [ "RTCP", "filled", "confirmed", "kernelized", "no kernel support" ], "endpoint": { "family": "IPv4", "port": 60193, "address": "10.xx.xx.xx" }, "crypto suite": "AES_CM_128_HMAC_SHA1_80", "advertised endpoint": { "family": "IPv4", "port": 60193, "address": "10.xx.xx.xx" }, "stats": { "packets": 20, "bytes": 2080, "errors": 0 } } ], "flags": [ "initialized", "DTLS-SRTP", "ICE" ] } ], "created": 1402064111 } }, "created": 1402064111, "result": "ok" } `start recording` Message ------------------------- The `start recording` message must contain at least the key `call-id` and may optionally include `from-tag`, `to-tag` and `via-branch`, as defined above. The reply dictionary contains no additional keys. Enables call recording for the call, either for the entire call or for only the specified call leg. Currently *rtpengine* always enables recording for the entire call and does not support recording only individual call legs, therefore all keys other than `call-id` are currently ignored. If the chosen recording method doesn't support in-kernel packet forwarding, enabling call recording via this messages will force packet forwarding to happen in userspace only. If the optional 'output-destination' key is set, then its value will be used as an output file. Note that a filename extension will not be added. `stop recording` Message ------------------------- The `stop recording` message must contain the key `call-id` as defined above. The reply dictionary contains no additional keys. Disables call recording for the call. This can be sent during a call to immediately stop recording it. `block DTMF` and `unblock DTMF` Messages ---------------------------------------- These message types must include the key `call-id` in the message. They enable and disable blocking of DTMF events (RFC 4733 type packets), respectively. Packets can be blocked for an entire call if only the `call-id` key is present in the message, or can be blocked directionally for individual participants. Participants can be selected by their SIP tag if the `from-tag` key is included in the message, they can be selected by their SDP media address if the `address` key is included in the message, or they can be selected by the user-provided `label` if the `label` key is included in the message. For an address, it can be an IPv4 or IPv6 address, and any participant that is found to have a matching address advertised as their SDP media address will have their originating RTP packets blocked (or unblocked). Unblocking packets for the entire call (i.e. only `call-id` is given) does not automatically unblock packets for participants which had their packets blocked directionally, unless the string `all` (equivalent to setting `all=all`) is included in the `flags` section of the message. When DTMF blocking is enabled, DTMF event packets will not be forwarded to the receiving peer. If DTMF logging is enabled, DTMF events will still be logged to syslog while blocking is enabled. Blocking of DTMF events can be enabled and disabled at any time during call runtime. `block media` and `unblock media` Messages ------------------------------------------ Analogous to `block DTMF` and `unblock DTMF` but blocks media packets instead of DTMF packets. DTMF packets can still pass through when media blocking is enabled. Media packets can be blocked for an entire call, or directionally for individual participants. See `block DTMF` above for details. In addition to blocking media for just one call participant, it's possible to block media for just a single media flow. This is relevant to scenarios that involve forked media that were established with one or more `subscribe request`. To select just one media flow for media blocking, in addition to selecting a source call participant as above, a destination call participant must be specified using the `to-tag` or `to-label`key in the message. Another possibility to block media for individual media flows is to use one of the special `all=` keywords instead of directly specifying a single `to-tag` or `to-label`. With `all=offer-answer` all media flows from the given `from-tag` that resulted from an offer/answer negotiation are affected. Respectively with `all=except-offer-answer` the opposite happens. With `all=flows` all currently established media flows are affected regardless or how they were created. `silence media` and `unsilence media` Messages ---------------------------------------------- Identical to `block media` and `unblock media` except that media packets are not simply blocked, but rather have their payload replaced with silence audio. This is only supported for certain trivial audio codecs (i.e. G.711, G.722). `start forwarding` and `stop forwarding` Messages ------------------------------------------------- These messages control the recording daemon's mechanism to forward PCM via TCP/TLS. Unlike the call recording mechanism, forwarding can be enabled for individual participants (directionally) only, therefore these messages can be used with the same options as the `block` and `unblock` messages above. The PCM forwarding mechanism is independent of the call recording mechanism, and so forwarding and recording can be started and stopped independently of each other. `play media` Message -------------------- Only available if compiled with transcoding support. The message must contain the key `call-id` and one of the participant selection keys described under the `block DTMF` message (such as `from-tag`, `address`, or `label`). Alternatively, the `all` flag can be set to play the media to all involved call parties. Starts playback of a provided media file to the selected call participant. The format of the media file can be anything that is supported by *ffmpeg*, for example a `.wav` or `.mp3` file. It will automatically be resampled and transcoded to the appropriate sampling rate and codec. The selected participant's first listed (preferred) codec that is supported will be chosen for this purpose. Media files can be provided through one of these keys: * `file` Contains a string that points to a file on the local file system. File names can be relative to the daemon's working direction. * `blob` Contains a binary blob (string) of the contents of a media file. Due to the limitations of the *ng* transport protocol, only very short files can be provided this way, and so this is primarily useful for testing and debugging. * `db-id` Contains an integer. This requires the daemon to be configured for accessing a *MySQL* (or *MariaDB*) database via (at the minimum) the `mysql-host` and `mysql-query` config keys. The daemon will then retrieve the media file as a binary blob (not a file name!) from the database via the provided query. * `repeat-times` Contains an integer. How many times to repeat playback of the media. Default is 1. * `start-pos` Contains an integer. The start frame position to begin the playback from. In addition to the `result` key, the response dictionary may contain the key `duration` if the length of the media file could be determined. The duration is given as in integer representing milliseconds. `stop media` Message -------------------- Stops the playback previously started by a `play media` message. Media playback stops automatically when the end of the media file is reached, so this message is only useful for prematurely stopping playback. The same participant selection keys as for the `play media` message can and must be used. Will return the last frame played in `last-frame-pos` key. `play DTMF` Message ------------------- Instructs *rtpengine* to inject a DTMF tone or event into a running audio stream. A call participant must be selected in the same way as described under the `play media` message above (including the possibility of using the `all` flag). The selected call participant is the one generating the DTMF event, not the one receiving it. The dictionary key `code` (or alternatively `digit`) must be present in the message, indicating the DTMF event to be generated. It can be either an integer with values 0-15, or a string containing a single character (`0` - `9`, `*`, `#`, `A` - `D`). Additional optional dictionary keys are: `duration` indicating the duration of the event in milliseconds (defaults to 250 ms, with a minimum of 100 and a maximum of 5000); `volume` indicating the volume in absolute decibels (defaults to -8 dB, with 0 being the maximum volume and positive integers being interpreted as negative); and `pause` indicating the pause in between consecutive DTMF events in milliseconds (defaults to 100 ms, with a minimum of 100 and a maximum of 5000). This message can be used to implement `application/dtmf-relay` or `application/dtmf` payloads carried in SIP INFO messages. Multiple DTMF events can be queued up by issuing multiple consecutive `play DTMF` messages. If the destination participant supports the `telephone-event` RTP payload type, then it will be used to send the DTMF event. Otherwise a PCM DTMF tone will be inserted into the audio stream. Audio samples received during a generated DTMF event will be suppressed. The call must be marked for DTMF injection using the `inject DTMF` flag used in both `offer` and `answer` messages. Enabling this flag forces all audio to go through the transcoding engine, even if input and output codecs are the same (similar to DTMF transcoding, see above). `statistics` Message -------------------- Returns a set of general statistics metrics with identical content and format as the `list jsonstats` CLI command. Sample return dictionary: { "statistics": { "currentstatistics": { "sessionsown": 0, "sessionsforeign": 0, "sessionstotal": 0, "transcodedmedia": 0, "packetrate": 0, "byterate": 0, "errorrate": 0 }, "totalstatistics": { "uptime": "18", "managedsessions": 0, "rejectedsessions": 0, "timeoutsessions": 0, "silenttimeoutsessions": 0, "finaltimeoutsessions": 0, "offertimeoutsessions": 0, "regularterminatedsessions": 0, "forcedterminatedsessions": 0, "relayedpackets": 0, "relayedpacketerrors": 0, "zerowaystreams": 0, "onewaystreams": 0, "avgcallduration": "0.000000" }, "intervalstatistics": { "totalcallsduration": "0.000000", "minmanagedsessions": 0, "maxmanagedsessions": 0, "minofferdelay": "0.000000", "maxofferdelay": "0.000000", "avgofferdelay": "0.000000", "minanswerdelay": "0.000000", "maxanswerdelay": "0.000000", "avganswerdelay": "0.000000", "mindeletedelay": "0.000000", "maxdeletedelay": "0.000000", "avgdeletedelay": "0.000000", "minofferrequestrate": 0, "maxofferrequestrate": 0, "avgofferrequestrate": 0, "minanswerrequestrate": 0, "maxanswerrequestrate": 0, "avganswerrequestrate": 0, "mindeleterequestrate": 0, "maxdeleterequestrate": 0, "avgdeleterequestrate": 0 }, "controlstatistics": { "proxies": [ { "proxy": "127.0.0.1", "pingcount": 0, "offercount": 0, "answercount": 0, "deletecount": 0, "querycount": 0, "listcount": 0, "startreccount": 0, "stopreccount": 0, "startfwdcount": 0, "stopfwdcount": 0, "blkdtmfcount": 0, "unblkdtmfcount": 0, "blkmedia": 0, "unblkmedia": 0, "playmedia": 0, "stopmedia": 0, "playdtmf": 0, "statistics": 0, "errorcount": 0 } ], "totalpingcount": 0, "totaloffercount": 0, "totalanswercount": 0, "totaldeletecount": 0, "totalquerycount": 0, "totallistcount": 0, "totalstartreccount": 0, "totalstopreccount": 0, "totalstartfwdcount": 0, "totalstopfwdcount": 0, "totalblkdtmfcount": 0, "totalunblkdtmfcount": 0, "totalblkmedia": 0, "totalunblkmedia": 0, "totalplaymedia": 0, "totalstopmedia": 0, "totalplaydtmf": 0, "totalstatistics": 0, "totalerrorcount": 0 } }, "result": "ok" } `publish` Message ----------------- Similar to an `offer` message except that it is used outside of an offer/answer scenario. The media described by the SDP is published to *rtpengine* directly, and other peer can then subscribe to the published media to receive a copy. The message must include the key `sdp` which should describe `sendonly` media; and the key `call-id` and `from-tag` to identify the publisher. Most other keys and options supported by `offer` are also supported for `publish`. The reply message will contain an answer SDP in `sdp`, but unlike with `offer` this is not a rewritten version of the received SDP, but rather a `recvonly` answer SDP generated by *rtpengine* locally. Only one codec for each media section will be listed, and by default this will be the first supported codec from the published media. This can be influenced with the `codec` options described above, in particular the `accept` option. The list of codecs given in the `accept` option is treated as a list of codec preferences, with the first codec listed being the most preferred codec to be accepted, and so on. It is allowable to list codecs that are not supported for transcoding. If no codecs from the `accept` list are present in the offer, then the first codec that is supported for transcoding is selected. If no such codec is present, then the offer is rejected. The special string `any` can be given in the `accept` list to influence this behaviour: If `any` is listed, then the first codec from the offer is accepted even if it's not supported for transcoding. `subscribe request` Message --------------------------- This message is used to request subscription (i.e. receiving a copy of the media) to one or multiple existing call participants, which must have been created either through the offer/answer mechanism, or through the publish mechanism. A single call participant can be selected in the same way as described under `block DTMF`. Multiple call participants can be selected either by using the `all` keyword, in which case all call participants that were created through the offer/answer mechanism will be selected, or by providing a list of tags (from-tags) in the `from-tags` list. This message then creates a new call participant, which corresponds to the subscription. This new call participant will be identified by a newly generated unique tag, or by the tag given in the `to-tag` key. If a label is to be set for the newly created subscription, it can be set through `set-label`. The reply message will contain a sendonly offer SDP in `sdp` which by default will mirror the SDP of the call participant being subscribed to. If multiple call participants are subscribed to at the same time, then this SDP will contain multiple media sections, combined out of the media sections of all selected call participants. This offer SDP can be manipulated with the same flags as used in an `offer` message, including the option to manipulate the codecs. The reply message will also contain the `from-tags` (corresponding to the call participants being subscribed to) and the `to-tag` (corresponding to the subscription, either generated or taken from the received message). If a `subscribe request` is made for an existing `to-tag` then all existing subscriptions for that `to-tag` are deleted before the new subscriptions are created. `subscribe answer` Message -------------------------- This message is expected to be received after responding to a `subscribe request` message. The message should contain the same `to-tag` as the reply to the `subscribe request` as well as the answer SDP in `sdp`. By default, the answer SDP must accept all codecs that were presented in the offer SDP (given in the reply to `subscribe request`). If not all codecs were accepted, then the `subscribe answer` will be rejected. This behaviour can be changed by including the `allow transcoding` flag in the message. If this flag is present, then the answer SDP will be accepted as long as at least one valid codec is present, and the media will be transcoded as required. This also holds true if some codecs were added for transcoding in the `subscribe request` message, which means that `allow transcoding` must always be included in `subscribe answer` if any transcoding is to be allowed. The reply message will simply indicate success or failure. If successful, media forwarding will start to the endpoint given in the answer SDP. `unsubscribe` Message --------------------- This message is a counterpart to `subsscribe answer` to stop an established subscription. The subscription to be stopped is identified by the `to-tag`. The *tcp-ng* Control Protocol ========================= *rtpengine* also has support for *ng* control protocol where transport is TCP (If enabled in the config via the --listen-tcp-ng option). Everything said for UDP based *ng* protocol counts for TCP variant too. HTTP/WebSocket support ====================== If enabled in the config, *rtpengine* can handle requests made to it via HTTP, HTTPS, or WebSocket (WS or WSS) connections. The supported HTTP URIs and WebSocket subprotocols are described below. Dummy Test Interfaces --------------------- For HTTP and HTTPS, the URI `/ping` is provided, which simply responds with `pong` if requested via `GET`. For WebSockets, the subprotocol `echo.rtpengine.com` is provided, which simply echoes back any messages that are sent to it. CLI Interface ------------- This interface supports the same commands as the CLI tool `rtpengine-ctl` that comes packaged with `rtpengine`. For HTTP and HTTPS, the command is appended to the URI base `/cli/` and the request is made via `GET`, with spaces replaced by plus signs as required by HTTP (e.g. `GET /cli/list+totals`). For WebSockets, the subprotocol is `cli.rtpengine.com` and each WebSocket message corresponds to one CLI command and produces one message in response. The format of each response is exactly the same as produced by the CLI tool `rtpengine-ctl` and therefore meant for plain text representation. *ng* Protocol Interface ----------------------- This interface can be used to send and receive *ng* protocol messages over HTTP or WebSocket connections instead of plain UDP. For HTTP and HTTPS, the URI `/ng` is used, with the request being made by `POST` and the content-type set to `application/x-rtpengine-ng`. The message body must be in the same format as the body of an UDP-based *ng* message and must therefore consist of a unique cookie string, followed by a single space, followed by the message in *bencode* format. Likewise, the response will be in the same format, including the unique cookie. For WebSockets, the subprotocol `ng.rtpengine.com` is used and the protocol follows the same format. Messages must consist of a unique cookie and a string in bencode format, and responses will also be in the same format. Prometheus Stats Exporter ------------------------- The Prometheus metrics can be found under the URI `/metrics`. *Janus* Interface and Replacement Functionality =============================================== *Rtpengine* supports a limited and narrow subset of the features provided by [Janus](https://janus.conf.meetecho.com/), specifically the basic business logic behind the *videoroom* plugin. This makes it possible to use *rtpengine* as a drop-in replacement for *Janus* for this one specific use case, and has the benefit of being able to use all the extra features that *rtpengine* provides, such as transcoding, in-kernel packet forwarding for improved performance, etc. The required subset of the *Janus* API is exposed via *rtpengine*'s HTTP/WS interface. The HTTP admin API is connected to the `/admin` URI path using a JSON payload (same as *Janus* does), while the module communication happens on the WS protocol `janus-protocol`, also with JSON payloads (same as *Janus* does). Unlike *Janus*, both HTTP and WS endpoints are running on the same port. In fact, there is no real distinction between both interfaces, therefore both admin and non-admin messages can be sent via either interface. HTTPS and WSS are also supported. Token-based plugin authentication works similar to how it works in *Janus* except that only the single *videoroom* plugin is supported. The configuration setting `janus-secret` must be set to enable clients to connect to this simulated *Janus* interface and make use of its features. Under the hood the functionality of the *videoroom* plugin is facilitated using *rtpengine*'s `publish` and `subscribe` methods, which are mapped directly to the respective *Janus* methods. One *Janus* video room becomes one *rtpengine* call, with a distinctive and unique call ID based on the video room ID. There's currently no support for customising the SDP features and options used within the *Janus* drop-in mode, and, as *Janus* is WebRTC-specific, all SDPs produced from this mode can be used directly by WebRTC clients. Non-WebRTC clients can participate in the same video room as *Janus* clients if the respective mapped `publish` and `subscribe` methods are used, and with the call ID mapped to the video room ID.