Distinguish between two different types of "gauge" type metrics: Actual
gauges which (at least conceptually) have a single continuous value, and
metrics which are comprised of discretely sampled values, possibly from
multiple sources.
Real gauges with continuous values don't have mean/average/deviation
values directly associated with them, as calculating these requires
sampling or some other analysis.
Sampled metrics on the other hand do have these associated values.
Clarify which function does what and where each value comes from.
Change-Id: Iff5dd844b70ff70979b1b8c84dc7734d44b3da20
Rename structs and variables to make it clear that these min/max values
are min/max per-sec rate values.
Carry mins and maxes separately from averages. This changes the meaning
of $command_ps_avg away from an "average of averages" to an actual
average, which is more accurate.
Calculate this average based on per-interval differences and interval
duration (stats_rate_min_max_avg_sample).
Side effect: As rtpe_latest_graphite_interval_start is now set in
print_graphite_data instead of in graphite_loop_run, the test now
reports a different "interval calls duration".
Change-Id: I67b1118c18ca2464a48c4836fca3cfdb4d53c898
Perform accumulation of stats only once (i.e. increasing an actual
counter) and report stats based on differences to previous values,
instead of carrying multiple stats counters for each metric and
resetting each counter to zero whenever stats are reported.
`rtpe_stats` is the global master accumulator.
`_intv` variables are intermediate and local storage for values sampled
from `rtpe_stats` at regular intervals.
`_rate` and `_diff` variables hold stats calculated from `rtpe_stats`
and the respective `_intv` variable whenever the sampling and reporting
occurs.
`stats_counters_calc_diff` is used to calculate stats as differences
between `rtpe_stats` and the last sampled `_intv`
`stats_counters_calc_rate` does the same but calculates a per-second
rate, based on a microsecond duration.
Eliminate now-useless struct global_stats_ax
Change-Id: Ic4ca630161787025219b67e49b41995204d60573
Use dedicated functions and different code paths for the different use
cases, instead of just a single function which does if/else all the
time.
Change-Id: Ic3ab928c3605cfe4a2f48889e95a3a1ddccdbbec
In order to rewrite certain session-level SDP lines, we need to
reference a packet_stream which contains the correct information. But we
cannot simply rely on the first media section having a usable packet
stream, as the first media section could have been rejected. Iterate
media sections until we find a usable one.
Change-Id: I36594e80981fc0645a7747399bd9951fbc2e5676
This fixes the payload counts not being tracked correctly when payload
types repeat after the tracker rolls over.
Change-Id: I16208ef73f3af3b051b96541a4c145b323cef7b2
The SRTP decryption context is associated with the local socket. Use the
socket that a packet was actually received on for the decryption context
instead of using the one that it was expected to be received on.
Change-Id: Iddf400a440fc51b4afb370ec827f75e9626b2cfd
(cherry picked from commit 8c3452e50b7aa4f5b7122dbd7221e34143467885)
When a receiving socket doesn't match the socket we were expecting, make
sure that the receiving socket is actually one of the sockets we want to
use at this point before blindly switching the socket.
This fixes a race condition after a re-invite: A new set of sockets has
been opened, but an old/delayed RTP packet still arrives on one of the
old ports. In this case we don't want to switch the local socket.
Change-Id: I4e2b87ad608b1a9c6a0bb2eae5c305fd79be70d5
(cherry picked from commit 304a1b11ef6679b4ab133c1c44bb0f180903d948)
As Redis updates must be triggered with the call unlocked, use a
convenience wrapper function to unlock, update, unref.
fixes#1602
Change-Id: I67095f31fb605b6977c88d9e9b3db581dd71a0d9
... so that the publishing session gets notified about "webrtcup" and
not the session which created the room.
Change-Id: If7b308df4afa7afb19ecaca1f743f87c3c736007
Our own Janus WS client would create a single WS session and then create
all rooms under this one session and run all publishes and subscribers
under the same session. This is not a restiction imposed by Janus
though, which allows participation in one room by multiple sessions.
Remove this restriction to more closely mirror Janus behaviour.
Change-Id: Ic11f961369ce5ded599a7a22cd730236460a8c61
To allow supplying the handle ID and session ID separately without
requiring it to be in the JSON.
Change-Id: I4a6f18410084add2a37cdf1ea3375072a8e192ca
According to:
{
"request" : "join",
"ptype" : "subscriber",
"room" : <unique ID of the room to subscribe in>,
"use_msid" : <whether subscriptions should include an msid that references the publisher; false by default>,
"autoupdate" : <whether a new SDP offer is sent automatically when a subscribed publisher leaves; true by default>,
"private_id" : <unique ID of the publisher that originated this request; optional, unless mandated by the room configuration>,
"streams" : [
{
"feed" : <unique ID of publisher owning the stream to subscribe to>,
"mid" : "<unique mid of the publisher stream to subscribe to; optional>"
"crossrefid" : "<id to map this subscription with entries in streams list; optional>"
// Optionally, simulcast or SVC targets (defaults if missing)
},
// Other streams to subscribe to
]
}
{
"videoroom" : "attached",
"room" : <room ID>,
"streams" : [
{
"mindex" : <unique m-index of this stream>,
"mid" : "<unique mid of this stream>",
"type" : "<type of this stream's media (audio|video|data)>",
"feed_id" : <unique ID of the publisher originating this stream>,
"feed_mid" : "<unique mid of this publisher's stream>",
"feed_display" : "<display name of this publisher, if any>",
"send" : <true|false; whether we configured the stream to relay media>,
"ready" : <true|false; whether this stream is ready to start sending media (will be false at the beginning)>
},
// Other streams in the subscription, if any
]
}
Change-Id: Ieb38d4f562686283457a963334056b27927be974
Apparently Janus allows a single handle to be both controller and
publisher, and possibly also both publisher and subscriber. Remove the
limitation that forces one handle to only take one role.
Change-Id: I22c20981a213b84d06dad07b1ff634bfd024fd91
This is a new option flag, which provides a possiblity
to select specific crypto suite(s) for the offerer from
the given list of crypto suites received in the offer.
This will be used later on, when processing an answer from
the recipient and generating an answer to be sent out towards offerer.
Furthermore, this is being decided not when the answer is processed,
but already when the offer is processed.
Flag usage example:
`SDES-offerer_pref:AES_256_CM_HMAC_SHA;AES_256_CM_HMAC_SHA1_32;`
Change-Id: I2b22b38347d24f27331482e18b92305fbadb2520
We're already determining the destination media section in
media_player_play_init() (looking for audio media), so it makes sense to
determine the payload type there as well.
Change-Id: I33d4a15005c2146864f74663fe8de2893454345b
Split out the logic to determine the destination payload type into a
separate functions. This makes it possible to supply a different, or
pre-determined, payload type instead.
Change-Id: I9b67b29cafc0c6ce4e18eede64dea3d1973f8b63
It makes more sense to set up the codec handler from the init function
rather than from the function reading the media packet.
Change-Id: I0bea3d0fc0669a54f93b2598251df69274950365
Provide the targets for the two /bin/ components.
Adapt .install debhelper files.
Adapt iptables module install location to use the environment variable.
Change-Id: I963feba5f60f53773e497121d8947e7b4997d687
… if it does not exist. Likewise in iptables-extension/Makefile .
daemon/rtpengine.pod: spell what MOS means
MAX_SESSIONS in config file does not work, it must be max-sessions.
https://github.com/sipwise/rtpengine/pull/1589
1872 /* first add those mentioned in the order list,
1873 * but only, if they were previously generated/added to the sdes_out */
>>> CID 1530346: Control flow issues (DEADCODE)
>>> Execution cannot reach the expression "NULL" inside this statement: "l = (cpq_order ? cpq_order-...".
1874 for (GList *l = cpq_order ? cpq_order->head : NULL; l; l = l->next)
Change-Id: I58f84ba82d215a9eb6cbd97548e8e9e8a954bdc6
This is a new option flag, which provides the ordered list,
in which to add crypto suites into the SDP body.
Right now they're always added in the order given in the source code.
Flag usage example:
`SDES-order:AES_256_CM_HMAC_SHA;AES_256_CM_HMAC_SHA1_32;AES_192_CM_HMAC_SHA1_80;`
This means — those listed SDES crypto suites will be added
into the generated SDP body at the top of crypto suites list, in the given order.
But, each of them is added, only if it is about to be added/generated.
In other words, the `SDES-order:` flag itself doesn't add crypto suites,
it just affects the order of those suites to be added.
And the rest of non-mentioned suites, which are also to be added,
will be appended after those given, in the free manner of ordering.
Important thing to remember - it doesn't change the crypto suite tag
for the recipient, even though changing the order of them.
Additionally.
This flag does not contradict with `SDES-nonew`, `SDES-only-` and `SDES-no-` flags.
It just orders the list of crypto suites already prepared to be sent out.
Change-Id: I0fec54f9e2f3cd4913e905e8afe825712f82d1ae
A new function dedicated to SDES crypto suites comparison.
It compares the crypto suites using a name in 'str' format.
Recommended to be used in combination with:
g_queue_find_custom() or g_list_find_custom()
Change-Id: I08ff6d3304f74d29154110caa472618478ca1837
New helper func: call_ng_flags_str_q_multi()
It parses given flags delimited by a separator, and stores
each of them in the given GQueue.
By default delimiter is assumed as: ';'.
Change-Id: I1e29bf3d852868e2bc4d98b1775f70b38f61054a
This type is used as const everywhere except internally, so make it part
of the typedef for brevity.
Change-Id: Ic4afe037b392239a991d5380c6708903011da29e
A new function dedicated to SDES crypto suites policy checks
has been introduced: 'crypto_params_sdes_check_limitations()'.
Use it to decrease an amount of repeating code blocks
related to SDES checks.
Change-Id: I0ac242a63107a9f3a41f95a57e3d3675645ac18d
Add a new flag to only accept these individual crypto suites
and none of the others.
For example, `SDES-only-NULL_HMAC_SHA1_32`
would only accept the crypto suite `NULL_HMAC_SHA1_32` for
the offer being generated.
This also takes precedence over the `SDES-no-` flag(s),
if used together, so the `SDES-no` will be not taken into account.
This has two effects:
- if a given crypto suite was present in a received offer,
it will be kept, so will be present in the outgoing offer; and
- if a given crypto suite was not present in the received offer,
it will be added to it. The rest, which is not mentioned,
will be dropped/not added.
Flag name: 'SDES-only-<crypto name>'
Additionally: add another new flag 'SDES-nonew'.
It will not add any new crypto suites into the offer.
It takes precedence over the `SDES-no` and `SDES-only` flags,
if used in combination.
Change-Id: Ic4fa03957ee3d4d24b0c4f3fd003eada05f49b0b
1) Read dtxb->start while the lock is held (not strictly necessary as
the read should be atomic anyway)
2) Expect that dtxb->start can be larger than rtpe_now.tv
The latter can happen as `rtpe_now` in a timer thread is faked to be
exactly the time when the timer was supposed to run, and not the actual
current time, which means that a newly added packet can have a later
time stamp than the "now" the timer thread is using.
Change-Id: I48fd7f78af97c6d5b802e5151d69855a90f4032d
Instead of going through ffmpeg to en/decode Opus, use libopus directly,
which allows us to benefit from additional features that aren't
available when going through ffmpeg.
Change-Id: I017c276cfa9755cefe95c8da26691446b718d4c8
Some codecs (e.g. Opus) can natively encode audio with various clock
rates without producing an output that is locked to that clock rate and
without requiring resampling the input. Add an appropriate callback
function and adapt tests.
Change-Id: Id788c4d4c05e20f93cce7e910f9f265b381cbe34
This makes it possible to have codecs running at variable clock rates
that differ from their RTP clock rates.
Change-Id: Ia2f5effb82eefe8c3028573ba0a6697da28473b1
Instead of just having an integer multiplier, support a fractional
factor. This allows us to have the RTP clock rate run faster than the
audio clock rate, and not just slower by an integer factor.
Change-Id: I7681cf369c43d8424ca2d2ebeffe932595d271ec
Unmark a monologue that has been scheduled for deletion when it's
associated with another one, which happens during offer/answer.
Fixes a regression from 53dbef7e1 which removed this logic from
__monologue_unkernelize with re-adding it elsewhere.
Change-Id: I037162e91fec42631680f7767f58b172fd6e04db
Add a flag to force increasing the SDP version,
even if the SDP hasn't been changed.
And cover it with tests.
Flag name: 'force-increment-sdp-ver'
Additionally fix the name of the 'sdp-version' flag
in the 'rtpengine-ng-client' tool.
Change-Id: I466792668b0cd313b5e21b248dd14cd599333cbd
`call_get_monologue_new` is supposed to always return a full dialogue,
but an error in invocation (using a from-tag that doesn't belong to an
offer/answer) can lead to the second half being unset. Return an error
in this case.
Change-Id: I84b21ff5e5c0403fc07cae83fee206705ecff8b3
Use the new `associated_tags` table to determine which tags are
associated with which. Iterate the associations between tags in a
tree-like manner and do this at the moment the `delete` command is
received. Break up the `associated_tags` links at this time, and
determine which tags would be left dangling and mark all of these for
deletion. If no tags are left after this process, mark the entire call
for deletion.
The previous approach was cumbersome and prone to errors. Using tag
names and branch names to determine which tags are associated with which
is a pointless hurdle, and using a table of associations that is
explicitly kept for this purpose is a much cleaner approach. Also
postponing the decision about which tags to delete until the time the
deletion actually happens can lead to tags not being deleted, when they
really should be (e.g. A -> B, delete A, A -> C).
Change-Id: I03ae57d0a2117ecd721372c1a49468fc34dd630c
Keep track which tags (monologues) were created together as part of an
offer/answer exchange with a separate hash table, regardless of whether
these monologues actually have tagged names or are just nameless
branches.
Change-Id: I60aa114c8caf6ecdff4705e3399f60190d04dda6
During offer/answer, we remove existing subscriptions before
re-establishing the new set of subscriptions. But we must also remove
the subscriptions of previous subscribers in order to keep the lists of
subscriptions and subscribers correctly reciprocal.
Change-Id: I7d39fa59892159f41033ae6a40e7cb51d861b12e
Reset the iteration counter for the frequency list when codec handlers
are set up, which happens while setting a new block mode. This makes
sure that a newly set list of frequencies is iterated starting from the
top.
Change-Id: I7ab4e28a1a998c11e38e26cf5b1f17f01299d5ad
Support multiple tone frequencies for DTMF-security=tone to enable
audibly distinguishing multiple consecutive DTMF events from one
another.
Change-Id: I6fa33a5768aae198220d0b0cc4c53308c5661a52
The `dtmf_send` event might not have a matching entry while handling a
received DTMF event. Move bookkeeping of the random output event into
`dtmf_recv`.
Change-Id: I5507b0b7f5eca6e29cbcaccc905ab25249b22aa3
Usually supplemental RTP types (DTMF) are listed after the primary audio
codecs. In the case of the order being reversed, fix `single-codec` so
that it doesn't strip the actual audio codec that is listed after the
DTMF type.
Change-Id: I1b03b89e31bebf4de303b643dcf08d2ffb90ebaf
In some cases it's possible that some packets still arrive in userspace
immediately after a stream has been pushed to the kernel, for example if
some packets are already in the queue or if there is some processing
delay (e.g. writing to Redis). Allow for a short delay before counting a
stream as userspace if it has been pushed to the kernel.
Change-Id: I55a6e255868c8c2a9e93355a4aa2287f07b3748d
Based on the information gotten from Richard Fuchs
document the main objects in the code, to let the code be more
understandable for other code readers.
Mainly documented:
- call
- call_monologue
- call_subscription
- call_media
- packet_stream
- stream_fd
- sink_handler
- rtpe_callhash / rtpe_callhash_lock
Change-Id: I0cf122bea2d9c3f198b48da134a70301564ff1f9
On bookworm and later, libasan reports a false positive in combination
with pthread_cleanup_push() (see [1]). Work around this by not using the
thread cleanup handler when running the asan build, and instead use a
shorter thread sleep time.
[1] https://gcc.gnu.org/bugzilla//show_bug.cgi?id=82109
Change-Id: Ieffdc0b13f470445f1f8e1d2448c6af6d8dd68e0
Only skip forwarding unknown payload types in the kernel module if
there's reason to skip them, i.e. when we know that certain payload
types must be handled in userspace. Use an explicit flag to signal this
to the kernel module instead of implicitly doing it for anything that is
RTP.
Change-Id: I655317afe64a27252bf7b8be6c78418db2e1ccef
Legacy UDP/TCP control protocols don't provide information about RTP
payload types, therefore don't pretend that we know that this is RTP.
Setting the RTP flag without knowing the payload types has the undesired
side effect that unknown payload types (all of them) would not be
handled by the kernel module.
Change-Id: I5882f777a5912b912ec7c870f21c77aac8127600
Instead of just leaving the transport protocol unset when we know we're
not supposed to be aware of the protocol, add a special entry to
suppress the pointless warning message.
Change-Id: I228c2f1652320627f974d9d7bcb0b1345adce2be
Similar to I7fd298669a4fd69e62edc4760ffd92eff074707b but for
codec-accept. This prefers accepting codecs that match the given
definiton exactly, but also accepts compatible codecs if no exact match
is found.
Change-Id: I52a2ab6e75f7334a85a8ef059a0d6703a07e4b7f
Legacy protocols don't set sp->num_ports. Use a sensible default for
this case.
Probably a regression from 2d2d7665b
Change-Id: Idcbc477a68b6db70a91a5d082736ac642c50ab15
When adding codecs to the SDP for potential transcoding, use more
sophisticated logic to determine whether the desired codec is already
present. Previously only the raw RTP payload string was used, which
doesn't take codec-specific format options into account. The new
matching function will now also match against existing codecs with
slightly different but compatible a=fmtp options, but will not match
against those with incompatible options.
Change-Id: I7fd298669a4fd69e62edc4760ffd92eff074707b
Convenience function to get a list of all codecs that match a given
definition, including a possible exact match.
Change-Id: I2b7d49fb320ad1725b348f7d29be450e5fea925b
Make these functions return the newly created payload type object so
that it can be manipulated directly without having to do a lookup.
Change-Id: Ib035cf7d61c61d0de6d5f87dfd497d17ba28ca5f
Parse out the format parameters for a payload type object when the codec
definition is loaded. Parsing it out is done only once, and if done
early the parsed contents can be used for format checking, comparing,
matching, etc.
Change-Id: I2856e5a8d4d76e7e1e648eff4a91fc51d0ba20c2
Split up this function into two parts so that they can be used
individually. Eliminate the special 0x1 return value as this isn't used
anywhere else. Move the error reporting into
codec_make_payload_type_sup() where it belongs.
Change-Id: Id2060272d87596a3db32d8776930a98b0f226b3b
Introduce an additional function for codec matching. Different functions
match different parts of an RTP payload type object and the referenced
codecs.
Change-Id: I2e488eaa7f69a55322db748fd40c8d1195e38605
We have no use for -1/0/1 return values. Change the return type to bool
to make things more clear.
Change-Id: Iedf1d8278c6dfddddb328ce7b3b1dbae132a39b7
Parsing out the a=fmtp string has been left up to the codec init
function until now, with the values that resulted from the parsing being
stored only within the codec. Convert this to an explicit method to
parse the a=fmtp string, and introduce a dedicated struct to store the
resulting values.
Functionally this change is a no-op.
Change-Id: Ia84e26d632ed5209b4439fd82c1e4e38850fd024
commit 025f56212d
Author: Andreas Granig <andreas@granig.com>
Date: Tue Oct 4 14:23:01 2022 +0200
Document the mqtt-tls-alpn option
commit e6cc320d19
Author: Andreas Granig <andreas@granig.com>
Date: Mon Oct 3 21:41:14 2022 +0200
Add TLS ALPN option to be set when connecting MQTT
This is required to be set to "mqtt" for instance when connecting
to the AWS IoT Core data endpoint at port 443 to indicate we're
sending MQTT, because in that case websocket and mqtt shares the same
port for whatever reason.
Change-Id: I6a391e815411b178187ef42aa009e45853d1c388
The packet must be decrypted first before RTP padding can be considered,
as the padding count is part of the encrypted payload as well.
Change-Id: I6aecff636efd420401856bb8110b3d784f989179
This distinguishes `to-label` from `set-label` for media blocking
methods, when previously they were synonymous.
Upgrade sink determination to list at the same time.
Change-Id: I5b35c78f2f307867b51b5376d5a6afbd79128d99
This makes it possible to have different media silencing options for
different outputs. Functionally this commit alone is a no-op.
Change-Id: I967c3e07ea4645bb49ccb76db12d51ded2d72f06
Make kernelize_one eturn the list of sorted payload types back to the
calling function instead of only keeping it temporarily. This makes it
possible to re-use the list in repeated invocations of the same
function.
Change-Id: I696b4d033715bb60c80c8b932b80d558f364a5c5
Don't keep the flag for "no kernel support" set indefinitely as
conditions might change, re-enabling kernel support at a later time.
Change-Id: Id8f456b653f1ea3d6a9db1ff3a0800d3cca8fcc5
Richard Fuchs
Lasse Bang Mikkelsen
Stefan Mititelu
Donat Zenichev
Дилян Палаузов
Damir Nedžibović
Dup4
Andreas Granig