During an offer, we update the codecs from the given list not only on
the side of the offerer, but also on the answerer's side, in order to
perform the codec answer routine during the answer phase. While doing
this, we empty out the existing list of codecs (on both sides) and
repopulate it fresh from the given list.
This can cause problems during a reverse re-invite, when the list of
codecs on the answerer's side already contained the codecs that had been
offered before. When setting up the new re-invite offer, we want to
retain codecs (and their payload types and format parameters) that were
already in place, instead of recreating a new list from scratch.
Improve this by adding a `merge_cs` option to the populating functions,
which points back to the stream_params codec_store. Codecs that would
have been removed from the codec_store during the repopulation are then
moved back into the stream_params codec_store instead. This then allows
the functions adding new codecs to the list (offer/transcode) to
reference these codecs that were previously in place, and so they can be
added back with the same options as they had existed before, instead of
recreating them from scratch.
Change-Id: I53e7ab10e9144a308a5c36be5ebfddd73c212f06
Add handling of SDP session level attributes for:
- `monologue_subscribe_request()`
- `monologue_subscribe_answer()`
This will be used by `janus.c` related functionality.
Change-Id: I1c50b5b9da08e7d8cb2c98eb6995d8610386d6ed
Move `a=extmap:` attribute to the `call_media`'s
`sdp_attributes` using `stream_params`.
Required by the `insert_sdp_attributes()` used in `sdp_create()`.
Additionally revert `extmap` unit test checks in the
`testVideoroomWebRTCVideo`.
Change-Id: If63e4e8733ea0899f34fae1f1d38997e9e2c081c
Move `a=ssrc-group:` attribute to the `call_media`'s
`sdp_attributes` using `stream_params`.
Required by the `insert_sdp_attributes()` used in `sdp_create()`.
Change-Id: I67025dc83dd8e5e46422b6dc1bc54aa9c838dfea
We have to move the list of attributes with following types
to the `call_media`'s `sdp_attributes` using `stream_params`:
ATTR_SSRC
ATTR_MSID
ATTR_OTHER
This is then required by the `insert_sdp_attributes()`
used by:
- `sdp_replace()` -> `replace_sdp_media_section()`
- `sdp_create()`
Additionally: move the `insert_sdp_attributes()`
to the usage of the `append_attr_to_gstring()`, which
gives SDP attrs manipulations control over attributes
being inserted into SDP. Previously not supported.
Additionally: `process_media_attributes()` takes new
argument `bool strip_attr_other`, in order to control
whether or not to strip `ATTR_OTHER/ATTR_SSRC/ATTR_MSID`.
For now there is only one user of it `replace_sdp_media_section()`,
but for later on, we can control this using this bool.
Additionally: `print_sdp_media_section()` takes new
argument `bool print_other_attrs`, in order to control
whether or not to strip `ATTR_OTHER/ATTR_SSRC/ATTR_MSID`.
This is required, because the sdp replacing/creating mechanism
needs a controllable way of adding them, users are:
- `janus_videoroom_join()`
`janus_videoroom_configure()` - always need them
- `call_publish_ng` - always needs them
- `call_subscribe_request_ng` - never needs them
(otherwise leads to a duplication of such attributes)
- `call_offer_answer_ng()` - requires them always
- `call_subscribe_request_ng()` - never needs them
(otherwise leads to a duplication of such attributes)
Change-Id: I9c83d99da1603acb55443c462797b2cd1e72477d
Stop using the call subscriptions model in the
subscribe request/answer functionality and move to
the media subscriptions.
Change-Id: I8aab2b1b4cdf9a3c5a04172c395ca509295ce0a3
The global list of monologues is populated in reverse order from the
list of medias. Iterate the list backwards so that the resulting medias
are in ascending order.
Change-Id: Icadca7a6cecb636ca6e021c0286b44e5cd3cdc84
With the "foreign" flag now stored in call_flags, restoring a call from
Redis restores this flag as well, overwriting the desired flag as we had
set it through call_get_or_create().
Reverse the flag setting by taking it out of call_get_or_create() (where
it's always false anyway, except when coming from Redis) and setting it
explicitly with call_make_own_foreign() after restorting call and its
flags.
Change-Id: Ib68be2aeedfa988b7555e426fa337657e1062245
Start using the media subscriptions model
(based on newly introduced `media_subscription` objects)
in scope of:
- `redis_encode_json()`
- `json_link_medias()`
- `rbl_subs_cb()`
Change-Id: I3f7267ab156b361d7e7bec4ff91a8976a7be02ee
Janus reports inactive and disabled streams only as being disabled and
doesn't report the codec in use. Mirror this behaviour.
Change-Id: Icf193f60a054b803afea02f048dcd8d26632bc47
Convert each listener entity into a list.
Support a list of values for each option so that multiple
ports/addresses can be listed.
Keep previous behaviour unchanged: If ANY address is given, open
listeners for IPv4 and IPv6.
Change-Id: Ic54f28d1262f60d5e5c9d824a95e7c33ebc2aba9
Previous implementation assumes that we use the `call_subscription`
objects in:
- `call_offer_answer_ng()`
- `call_update_lookup_udp()`
- `call_request_lookup_tcp()`
when appealing to the `call_get_mono_dialogue()`, in order to
get the `call_subscription` objects, in order to then pass it
for usage in the `monologue_offer_answer()`, where the most important
again is to use monologue references stored inside
the given `call_subscription` objects.
Instead of using the `call_subscription`, just use `call_monologue`
objects as a base data objects for this work,
which will allow us in the coming commits to deprecate
the `call_subscriptions` based model and
get to the subscription model based on medias.
Change-Id: Ia9ee5ba66522929acbceca28854ebccd3705635a
These had unintentionally been disabled and so have fallen derelict.
Replace the makefile `with_amr_tests` conditional with
`RTPENGINE_EXTENDED_TESTS`. The previous `with_amr_tests` was not
actually set anywhere and so these tests never ran. The new
`RTPENGINE_EXTENDED_TESTS` is used as switch for other tests already.
Bring the tests up to date so that they compile and run.
Allow for alternative AMR bit encodings as different versions of the
codec produce different outputs.
Use an inline `struct cb_args` to pass these expected strings to the
callback functions.
Update `int` to `size_t` where appropriate.
Make a copy of the format string in `__sdp_pt_fmt` as the parsing
function temporarily writes into the string, which means a readonly
string literal doesn't work.
Update the AMR tests in test-transcode to the new API and new expected
values.
Change-Id: Ic3332e696522a28595ea06be9996001d3ab7686e
Fix for:
make: *** No rule to make target '../daemon/poller.c', needed by 'codec.c'. Stop.
make: *** Waiting for unfinished jobs....
Change-Id: I94bb758cc28cbaf2bec320213dd40a4fd075f12c
To be able to use this feature from controlling agents which don't
directly support the new dictionary keys, add an alternative syntax via
the `flags` list. This is in line with all other similar dictionary keys
(e.g. `codec-` etc)
Change-Id: I7210c74c9cd3b31338052efa1c3504fe775c1c46
Richard Fuchs
Donat Zenichev
Steven Ayre