There's two flavours of this struct being in use, even though the
structs' signatures are the same. One contains socket_t objects, the
other contains stream_fd objects. Separate them out and be explicit
about which is which.
Change-Id: I5ef1d154cc442528149f69be2e6a02625a6c650d
Simple wrappers around glib's GHashTable functions that add type
information, instead of just using void* for everything.
Change-Id: I3e7c0f095f1f58b943ba80d1e14e763707ee1698
Allow codec_tracker_update to reference an existing codec_store. Then
when a supplemental codec type needs to be generated, make it look up
the type in the existing codec_store and re-use the existing payload
type if present instead of creating a new one. This allows payload type
numbers to remain unchanged during a re-invite.
Change-Id: I9e5edd897515a5e3eb5033aa6bbf21c8667d6133
During an offer, we update the codecs from the given list not only on
the side of the offerer, but also on the answerer's side, in order to
perform the codec answer routine during the answer phase. While doing
this, we empty out the existing list of codecs (on both sides) and
repopulate it fresh from the given list.
This can cause problems during a reverse re-invite, when the list of
codecs on the answerer's side already contained the codecs that had been
offered before. When setting up the new re-invite offer, we want to
retain codecs (and their payload types and format parameters) that were
already in place, instead of recreating a new list from scratch.
Improve this by adding a `merge_cs` option to the populating functions,
which points back to the stream_params codec_store. Codecs that would
have been removed from the codec_store during the repopulation are then
moved back into the stream_params codec_store instead. This then allows
the functions adding new codecs to the list (offer/transcode) to
reference these codecs that were previously in place, and so they can be
added back with the same options as they had existed before, instead of
recreating them from scratch.
Change-Id: I53e7ab10e9144a308a5c36be5ebfddd73c212f06
From now on the `call_subscription` concept gets
deprecated, and instead of it the `media_subscriptions`
concept gets applied.
Benefits of this change is:
- ability to subscribe one-to-multiple medias (different monologues)
- media level manipulations, without affecting whole SDP session
- no need to use medias offset, to detect proper subscription's media
- there is no need of particular medias order, they can be
subscribed to each other in any possible way
(even though RFC still requires to always have proper ordering)
Deprecated objects:
- `struct call_subscription`
- `GQueue subscriptions`
- `GQueue subscribers`
- `GHashTable * subscriptions_ht`
- `GHashTable * subscribers_ht`
Deprecated functionality:
- `__unsubscribe_one()`
- `__unsubscribe_all_offer_answer_subscribers()`
- `__unsubscribe_from_all()`
- `__subscribe_offer_answer_both_ways()`
- `__add_subscription()`
- `__unsubscribe_one_link()`
- `call_get_call_subscription()`
- `call_subscriptions_clear()`
- `call_subscriptions_free()`
Offtopic: additionally this commit adds helper func:
- `call_media_subscribed_to_monologue()`
Change-Id: Ifb44f7a1ba5b483b1472882b1b8d06444dba1727
In the `dialogue_unconfirm()` (previously `dialogue_unkernelize()`)
use media subscriptions to find subscribers/subscriptions
and correlated to them medias to unconfirm them.
This change is bound to the switch from monologue
subscriptions to media subscriptions.
Additionally: Refactor unkernelize/unconfirm in `call.c`
To provide a sense of the functions clearer,
the namings of the following function singatures
have been changed:
- `dialogue_unkernelize()` -> `dialogue_unconfirm()`
- `__monologue_unkernelize()` -> `__monologue_unconfirm()`
Change-Id: If8cc2515eb26dcc4ffed02a420514f98d43cc5c6
Add handling of SDP session level attributes for:
- `monologue_subscribe_request()`
- `monologue_subscribe_answer()`
This will be used by `janus.c` related functionality.
Change-Id: I1c50b5b9da08e7d8cb2c98eb6995d8610386d6ed
We have to move the list of attributes with following types
to the `call_media`'s `sdp_attributes` using `stream_params`:
ATTR_SSRC
ATTR_MSID
ATTR_OTHER
This is then required by the `insert_sdp_attributes()`
used by:
- `sdp_replace()` -> `replace_sdp_media_section()`
- `sdp_create()`
Additionally: move the `insert_sdp_attributes()`
to the usage of the `append_attr_to_gstring()`, which
gives SDP attrs manipulations control over attributes
being inserted into SDP. Previously not supported.
Additionally: `process_media_attributes()` takes new
argument `bool strip_attr_other`, in order to control
whether or not to strip `ATTR_OTHER/ATTR_SSRC/ATTR_MSID`.
For now there is only one user of it `replace_sdp_media_section()`,
but for later on, we can control this using this bool.
Additionally: `print_sdp_media_section()` takes new
argument `bool print_other_attrs`, in order to control
whether or not to strip `ATTR_OTHER/ATTR_SSRC/ATTR_MSID`.
This is required, because the sdp replacing/creating mechanism
needs a controllable way of adding them, users are:
- `janus_videoroom_join()`
`janus_videoroom_configure()` - always need them
- `call_publish_ng` - always needs them
- `call_subscribe_request_ng` - never needs them
(otherwise leads to a duplication of such attributes)
- `call_offer_answer_ng()` - requires them always
- `call_subscribe_request_ng()` - never needs them
(otherwise leads to a duplication of such attributes)
Change-Id: I9c83d99da1603acb55443c462797b2cd1e72477d
Stop using the call subscriptions model in the
subscribe request/answer functionality and move to
the media subscriptions.
Change-Id: I8aab2b1b4cdf9a3c5a04172c395ca509295ce0a3
For the use case with a separate base chain, we want to preempt other
firewall rules by default and insert our immediate jump rule at the
beginning, rather than at the end. Add an option to provide the other
behaviour.
Change-Id: I16171f7c028c89b94823ecc99387771be3ba9443
If we're updating the handlers for one particular source -> sink flow,
only stop/reset the handlers matching this flow.
Change-Id: I1d046f47f8d26cac47c5d0f4318498eacb6c5677
With the "foreign" flag now stored in call_flags, restoring a call from
Redis restores this flag as well, overwriting the desired flag as we had
set it through call_get_or_create().
Reverse the flag setting by taking it out of call_get_or_create() (where
it's always false anyway, except when coming from Redis) and setting it
explicitly with call_make_own_foreign() after restorting call and its
flags.
Change-Id: Ib68be2aeedfa988b7555e426fa337657e1062245
Start using the media subscriptions model
(based on newly introduced `media_subscription` objects)
in scope of:
- `redis_encode_json()`
- `json_link_medias()`
- `rbl_subs_cb()`
Change-Id: I3f7267ab156b361d7e7bec4ff91a8976a7be02ee
UDP packets sent in response to a UDP request should have the same
source address as the request's destination address.
This can be achieved with sockets bound to a specific address, but in
the case of ANY-bound sockets, we can use the PKTINFO mechanism to do
this.
Extend control_ng_process() to accept an extra socket address
corresponding to the local address to use. Extend the signature of the
callback function (to do the actual sending) accordingly.
Extend socket_sendiov() to be able to set the PKTINFO cmsg when sending
a packet.
Add socket_sendto_from() as a convenience wrapper.
Extend control_udp_incoming() to pass the address from
udp_buf->local_addr back to socket_sendiov().
Change-Id: Idd019fdcfd796098e7807427e6686d4b05de35d1
Richard Fuchs
Dennis Yurasov
Andrii Pogrebennyk
Donat Zenichev