With the "foreign" flag now stored in call_flags, restoring a call from
Redis restores this flag as well, overwriting the desired flag as we had
set it through call_get_or_create().
Reverse the flag setting by taking it out of call_get_or_create() (where
it's always false anyway, except when coming from Redis) and setting it
explicitly with call_make_own_foreign() after restorting call and its
flags.
Change-Id: Ib68be2aeedfa988b7555e426fa337657e1062245
Start using the media subscriptions model
(based on newly introduced `media_subscription` objects)
in scope of:
- `redis_encode_json()`
- `json_link_medias()`
- `rbl_subs_cb()`
Change-Id: I3f7267ab156b361d7e7bec4ff91a8976a7be02ee
UDP packets sent in response to a UDP request should have the same
source address as the request's destination address.
This can be achieved with sockets bound to a specific address, but in
the case of ANY-bound sockets, we can use the PKTINFO mechanism to do
this.
Extend control_ng_process() to accept an extra socket address
corresponding to the local address to use. Extend the signature of the
callback function (to do the actual sending) accordingly.
Extend socket_sendiov() to be able to set the PKTINFO cmsg when sending
a packet.
Add socket_sendto_from() as a convenience wrapper.
Extend control_udp_incoming() to pass the address from
udp_buf->local_addr back to socket_sendiov().
Change-Id: Idd019fdcfd796098e7807427e6686d4b05de35d1
Convert each listener entity into a list.
Support a list of values for each option so that multiple
ports/addresses can be listed.
Keep previous behaviour unchanged: If ANY address is given, open
listeners for IPv4 and IPv6.
Change-Id: Ic54f28d1262f60d5e5c9d824a95e7c33ebc2aba9
Start using the media subscriptions model
(based on newly introduced `media_subscription` objects)
in scope of `hunt_ssrc()`.
Change-Id: I08c7292e0d73a486e25004358de91a3414ce886a
Introduce `media_unconfirm()` to do a selective handling
of medias to unkernelize the correlated to it streams.
This is analogue of the of the `__monologue_unconfirm()`
but for medias.
Change-Id: Id8ede0fc56412021c301e97764fd5dd070b7d484
Previous implementation assumes that we use the `call_subscription`
objects in:
- `call_offer_answer_ng()`
- `call_update_lookup_udp()`
- `call_request_lookup_tcp()`
when appealing to the `call_get_mono_dialogue()`, in order to
get the `call_subscription` objects, in order to then pass it
for usage in the `monologue_offer_answer()`, where the most important
again is to use monologue references stored inside
the given `call_subscription` objects.
Instead of using the `call_subscription`, just use `call_monologue`
objects as a base data objects for this work,
which will allow us in the coming commits to deprecate
the `call_subscriptions` based model and
get to the subscription model based on medias.
Change-Id: Ia9ee5ba66522929acbceca28854ebccd3705635a
Introduction of the basic functions required for
a handling of the media subscriptions:
- `__unsubscribe_media_link()`
- `__unsubscribe_media()`
- `__unsubscribe_all_medias()`
- `__add_media_subscription()`
- `__subscribe_medias_both_ways()`
- `__subscribe_matched_medias()`
- `call_get_media_subscription()`
- `call_totag_subscribed_to_monologue()`
- `call_viabranch_intact_monologue()`
Change-Id: Iad2af5323b2ea8a10a83064d9ee72106c1d8f9c0
Initial introduction of objects we need to handle for media
subscriptions implementation:
- `struct media_subscription`
- `media_subscribers` and `media_subscribers_ht` (quick access)
- `media_subscriptions` and `media_subscriptions_ht` (quick access)
Change-Id: Ia2c4555cd7f4bcfe149bdb9f25081e0b3078042e
All functions that create listener objects take a read-only endpoint, so
make them as const.
Remove the extra TOS argument to make all signatures the same.
Change-Id: I722c7665b192476d90dbf0ece200d0bfd34cb9eb
We have long switched to having a single primary global poller, so
there's no point in passing the poller pointer around and storing it in
associated objects. Remove all remnants of non-global pollers.
Change-Id: I5a3fd217d5de51e839e2b04fec7e23643ee83631
This is a dependency of the poller and so is needed in lib/ as well to
make it usable.
Also consolidate the type.
Change-Id: I70ec8a200d6cd65710ac93636a9495cf24c35ef4
All timers have been moved to their dedicated timer threads, making this
mechanism obsolete.
The only victim is the timeout handling for TCP control streams. Since
other TCP streams aren't using timeout handling either, and the TCP
control socket is barely used by anyone, we can live with not having a
dedicated timeout for these streams for now.
Change-Id: I83d9b9a844f4f494ad37b44f5d1312f272beff3f
The original sdp_manipulate_check's only purpose left is to check for an
attribute removal. Refactor accordingly.
Change-Id: I3be28e0a2c04461a60766afe7096ad3fb8bbe998
In order to perform a substitution we must do a lookup to the hash table
anyway. We can eliminate an extra lookup for the same key to check
whether a substitution exists by combining the two operations into one.
Change-Id: Ife8f1fbfd77ade1986a303a3a5503f4142f7de01
Operating on an empty queue is essentially a no-op, so there's no point
in doing an extra check first to see if the queue is empty. Remove this
extra check for the CMD_ADD case.
Change-Id: I3c7524cd407fb350a46bdf8d3a91014158c6bf44
Use an indexed array to generically support all possible media types
instead of hard-coding a few possible types. This makes lookup faster
and is also future-proof.
Add helper functions to allocate and lookup the appropriate object.
Change-Id: I28406b2c5a6829330f41601fa52e738d9a8ee315
Transcoding is flow-specific, so it doesn't make sense to have a flag
for it in a call_media section. Instead we use the transcoding flag set
on the call_subscription objects (on subscribers), and set/unset a flag
on the monologue struct, depending on whether any media flows (going to
subscribers) have transcoding enabled.
Change-Id: Id671d56e56a22eaa8e56f6d449770b0c7b086cea
Pass the subscription object to codec_handlers_update to eliminate the
need for a return type and the subsequent if/else.
Change-Id: I311b3e8ca14ee5090cf329163975354385cee800
We have the subscription objects available now, so we can directly set
the transcoding flag without having to do a hash table lookup.
Change-Id: I2b85f34ca4d03dfaf81d92ea252902d1ee194efd
Instead of just return the monologues involved in an offer/answer,
return the respective subscription objects that have the monologues
pointing to each other. This makes it possible to set flags within these
objects.
Change-Id: Id88e56e1bf164a75e2172d0df04316cde5d8a955
Make it possible for a looper thread function to break out of the loop
by returning an appropriate status code.
Change-Id: I22e7789270eed4bf3340e7dae941929de58700ea
Make it possible to set output-destination immediately when starting the
reording, not only afterwards.
Closes#1667
Change-Id: Idb7de770ad5a41d6ae6055784213e7983df9bfec
Move the `ice_slow_timer()` functionality to a separate thread,
so that we do the work more efficiently, and not be dependent
on the call_timer runs by poller.
Furthermore it makes more sense to keep in the `ice.c`,
since it obviously has to do with ice timing.
Additionally:
Update the test-stats due to these changes in the `call_timer()`
We have to call the `ice_slow_timer()` now explicitely from
the test-stats.c, because the `call_timer()` is not anymore
responsible for providing stats counters rate calculations.
Change-Id: I03377dd59ea71c27497e1f4d30164075f05165cd
Similarly as for the `stats_rate_min_max()`,
move the `stats_counters_calc_rate()` functionality
to the same separate thread, so that we do the work
more efficiently and not be dependent on the call_timer
runs by poller.
Furthermore it makes more sense to keep in the `statistics.c`,
since it obviously has to do with statistics.
Additionally:
Update the test-stats due to these changes in the `call_timer()`
We have to call the `stats_counters_calc_rate()` now explicitely from
the test-stats.c, because the `call_timer()` is not anymore
responsible for providing stats counters rate calculations.
Change-Id: I1682eb76e3057f0f431c27b9633717d965313a1a
To do the work more efficiently,
and not be dependent on the call_timer runs by poller,
we should move the ports iterations (stats update from the kernel)
functionality to a separate thread, to make it faster and
not be dependent on what happens in the `call_timer` at all.
Since it has nothing to do with the call timers.
As an additional benefit: we unload the `call_timer` runner.
Change-Id: I511529ce504ef3d29f4e9d6d731ffd470d78d27a
Due to multiple threads polling all sockets for read events, it's
possible for one socket to receive a read event in one thread, then
immediately receive another read event in another thread, resulting in
two threads reading packets from the same socket at the same time.
While this is perfectly valid and correctly handled by mutex etc, it can
result in packets being processed out of order. In media passthrough
scenarios which don't do sequencing this can result in packets being
reordered.
Using a simple atomic counter we can ensure that only one thread is
reading from any one socket at a time.
Relevant to #1638
Change-Id: I406491d6ae5e13e618e153ba5463fd9169636016
To do the work more efficiently,
and not be dependent on the call_timer runs by poller,
we should move the `stats_rate_min_max()` to a separate thread,
to make it faster and not be dependent on what happens in the `call_timer` at all.
Since it has nothing to do with the call timers.
Change-Id: I9a39e1b63cb8741377f5af5b2d52d4f8b428a0ad
To do the work more efficiently and not be dependent on
the `call_timer` runs by poller, we should move
the releasing of sockets to a separate thread, to make it
faster and not be dependent on what happens in the `call_timer`
at all. Since it has nothing to do with the call timers.
Since now we have two queues:
- thread scope (local): ports_to_release
- global one: ports_to_release_glob
`sockets_releaser()` uses the ports_to_release_glob,
meanwhile appending in the `call_timer()` happens using the
ports_to_release.
Change-Id: Iadd966ac895b2dd64f81269d4fdf5d83747fe0b7
No need to iterate the list to achieve what the function does. We can
simply adjust pointers and count.
Change-Id: I849817e53d859ac73c14131b54a6d05e4efeb37e
For efficiency reasons `substitute` kind of SDP manipulations
commands have been moved to the `GHashTable` instead of the `GQueue`.
Change-Id: Iec6c44109ae912ba0de440bbed6ecaee6a238b97
Add a flag to inhibit kernel mode while DTMF injection is active. Tie in
DTMF playback trigger function: Remove stream from kernel, set inhibit
flag, play DTMF, then unset inhibit flag when all events have been
injected.
Change-Id: I533ec95a676bc7edf4dd973217f8d9499f1e22b6
Support using the SSRC TS derived from received RTP packets as "encoder"
TS (the "next" expected TS) for passthrough RTP in addition to the FIFO
TS of an actual encoder.
Change-Id: I7c49c27651eb89c5349bbf290b1c0ad160f77e3b
Instead of doing two calls to the kernel every time a forwarding stream
is deleted (one to update the stats and one to delete), combine these
two into a single call using REMG_DEL_TARGET_STATS.
Change-Id: I9fcb148930c24bc866f842a50edd613fb6296de0
When the `discard-recording` flag is given in one of the commands to
rtpengine (e.g. in the `delete` command), the metafile is renamed to a
.DISCARD suffix and then deleted.
The recording daemon then, seeing the .DISCARD suffix, proceeds to
immediately close all recordings, delete the files if any, and delete
the entries from the DB.
Change-Id: I3f0cac129f2d56cbccd770d43bf434dea6c0a0db
Rename the original call_delete_branch() to call_delete_branch_by_id()
and provide a new call_delete_branch() which takes a reference to a call
object instead of a call ID.
Change-Id: Ie549e7f550fab5edc6e81472e78565e1925fae67
These are two different file paths and each belongs to its respective
recording method. Move them into the appropriate struct. Also use
g_clear_pointer() for memory bookkeeping.
Change-Id: I25a897636d4f6e8fea3c533f9ca39c90f81390f8
Defer handling of trickle ICE updates to the appropriate function, which
also handles queuing up the updates in case they're processed before the
call or call party has been fully created.
Change-Id: I2489cb0ee96fba35003765bbdd692f02caed7055
Move trickle ICE handling out of __media_init_from_flags and into a
higher-level function. This obsoletes the special magic return value to
indicate a trickle ICE failure.
All methods accepting trickle ICE updates must now explicitly call the
trickle ICE update function.
The requirement to have a full dialogue for trickle ICE updates is
removed as trickle ICE only affects one side.
Change-Id: I0850e1858876ca7bcdd39b7144b53b5a4afed53e
Moving code for handling (queuing, dequeuing) trickle ICE fragments into
ice.c, where it makes no sense. No functional changes.
Change-Id: Ib68f82e8d58efe066fdc48cd32ca9869cdeab846
Using a pointer array instead of a linked lists allows us to directly
reference a media section by index number, without having to spool into
the linked list.
No functional changes.
Change-Id: I8b0e93f0c2e9addbcb4c938894118ed4a6aec768
We have to stop using objects of `struct port_pool` (media_socket.h),
becasue a newer approach introduced for ports allocations deprecates
usage of them.
Deprecated objects:
`port_pool.last_used`
`port_pool.ports_used`
`port_pool.free_list`
`port_pool.free_list_used`
Change-Id: I70e166753da7a43cb3b6b188c83d978b7dbce046
Introduce a reworked port allocation in RTPEngine.
The goal of this rework is to:
- simplify the logic of handling free/engaged ports
- eliminate a bottle neck begotten by overcomplicated logic
- potentially resolve the issue with "ran out of ports"
under heavy loading, when still there must be ports left
in the ports pool
Change-Id: Ifd2b1565611dd3b86c474a1ea5507fc6152fc212
Avoid calling lws_write() from threads other than the service thread, as
this might not be thread-safe. Instead store the values used for the
HTTP response headers in the websocket_output, then trigger a "writable"
callback, and finally do all the lws_write() calls from the service
thread.
Reported in #1624
Change-Id: Ifcb050193044e5543f750a12fb44f5e16d4c0a08
It substitutes a specified `a=` line taken from the concerned
media attributes list. If such line has been not found,
the attributes list remains untouched.
It subsitutes one attribute at a time, so one attribute into
another attribute.
Change-Id: Ie0a48ba46a1b196fbe33b09dedc40e4498640e34
dump_packet() had the "recording" argument removed at some point, making
the macro arguments invalid and checking for non-NULL pointless.
Change-Id: I9c021f3075ca9923217eaf7193f12c95b77ae081
Track audio writes in the mix buffer to set the `active` flag to true
whenever a write occurs, which makes it possible to create the buffer in
an inactivate state and implicitly set it active on demand.
Handle the mix buffer not returning any data in the RTP sending logic
(which is what happens for an inactive buffer) by simply not sending any
packets.
Change-Id: Iaeb0f6deadb3d90020c8c62872735cc94db80504
Similar to the existing media_player, but instead of simply producing
its own standalone output media stream, the audio_player takes over the
entire media stream flowing to the receiver, including media forwarded
from the opposite side of the call, as well as media produced by the
media_player.
Change-Id: Ic34ecf08fc73b04210cfffb1a7d795b462ece5ea
Return true/false from media player run functions to signal whether
playback is finished and whether codec handlers should be reset.
Change-Id: Ieb2e0861190ad2851d986bae28becc5548e215ce
Convenience function to check whether any formats have changed, which
would indicate that a restart of the media player is needed.
Functional no-op.
Change-Id: I2bc9b57b95bb229bc4f8cfc49ca662fa724d3642
In order to improve the efficieny of the code (make lookups
faster) use GQueues for CMD_ADD manipulations and
GHashTable for CMD_REM manipulations.
This gives the following benefits:
- faster lookup (check), if any SDP command is to be applied
(no need to iterate through all values of commands, as it used to be)
- keep a sequence for CMD_ADD values given by option flag(s)
In order to keep the code more lightweight and clear,
add a separate struct ptr to queues and hash tables into
the call_interfaces header.
Change-Id: I7e45aca4062750c7b8959473edb410ed76cc04e7
New section of option flags has been introduced for SDP body
attributes manipulations.
Three levels of the SDP session are concerned:
- session level (global one)
- media level - audio
- media level - video
Three different actions are supported for now:
- add
- remove
The value of the command has a wildcard matching approach.
Other attributes apart `a=` can not be edited by this functionality.
So such headers as: `c=`, `s=`, `o=` cannot be touched.
Change-Id: I939d4582839096b2399f7ded865e91ff6eb960a4
(cherry picked from commit 3f06c18793fe95e5b070044a0291a3e1528ac6e4)
Defined in RFC 8842. If a tls-id was previously given and a the new SDP
shows a different tls-id or none at all, we must restart DTLS.
Relevant to #1585
Change-Id: I554234dfcacbd330c7a0c6aea68f24d0449cba21
There's no point in sampling Graphite-specific stats, nor in reporting
them out, if Graphite is not enabled.
Change-Id: If8014513832485f38d81b478c695391129c21dff
Distinguish between two different types of "gauge" type metrics: Actual
gauges which (at least conceptually) have a single continuous value, and
metrics which are comprised of discretely sampled values, possibly from
multiple sources.
Real gauges with continuous values don't have mean/average/deviation
values directly associated with them, as calculating these requires
sampling or some other analysis.
Sampled metrics on the other hand do have these associated values.
Clarify which function does what and where each value comes from.
Change-Id: Iff5dd844b70ff70979b1b8c84dc7734d44b3da20
Rename structs and variables to make it clear that these min/max values
are min/max per-sec rate values.
Carry mins and maxes separately from averages. This changes the meaning
of $command_ps_avg away from an "average of averages" to an actual
average, which is more accurate.
Calculate this average based on per-interval differences and interval
duration (stats_rate_min_max_avg_sample).
Side effect: As rtpe_latest_graphite_interval_start is now set in
print_graphite_data instead of in graphite_loop_run, the test now
reports a different "interval calls duration".
Change-Id: I67b1118c18ca2464a48c4836fca3cfdb4d53c898
Perform accumulation of stats only once (i.e. increasing an actual
counter) and report stats based on differences to previous values,
instead of carrying multiple stats counters for each metric and
resetting each counter to zero whenever stats are reported.
`rtpe_stats` is the global master accumulator.
`_intv` variables are intermediate and local storage for values sampled
from `rtpe_stats` at regular intervals.
`_rate` and `_diff` variables hold stats calculated from `rtpe_stats`
and the respective `_intv` variable whenever the sampling and reporting
occurs.
`stats_counters_calc_diff` is used to calculate stats as differences
between `rtpe_stats` and the last sampled `_intv`
`stats_counters_calc_rate` does the same but calculates a per-second
rate, based on a microsecond duration.
Eliminate now-useless struct global_stats_ax
Change-Id: Ic4ca630161787025219b67e49b41995204d60573
Use dedicated functions and different code paths for the different use
cases, instead of just a single function which does if/else all the
time.
Change-Id: Ic3ab928c3605cfe4a2f48889e95a3a1ddccdbbec
The SRTP decryption context is associated with the local socket. Use the
socket that a packet was actually received on for the decryption context
instead of using the one that it was expected to be received on.
Change-Id: Iddf400a440fc51b4afb370ec827f75e9626b2cfd
(cherry picked from commit 8c3452e50b7aa4f5b7122dbd7221e34143467885)
... so that the publishing session gets notified about "webrtcup" and
not the session which created the room.
Change-Id: If7b308df4afa7afb19ecaca1f743f87c3c736007
This is a new option flag, which provides a possiblity
to select specific crypto suite(s) for the offerer from
the given list of crypto suites received in the offer.
This will be used later on, when processing an answer from
the recipient and generating an answer to be sent out towards offerer.
Furthermore, this is being decided not when the answer is processed,
but already when the offer is processed.
Flag usage example:
`SDES-offerer_pref:AES_256_CM_HMAC_SHA;AES_256_CM_HMAC_SHA1_32;`
Change-Id: I2b22b38347d24f27331482e18b92305fbadb2520
Richard Fuchs
Donat Zenichev
Orgad Shaneh
Stefan Mititelu
Michael Prokop
Tom Briden