Since we're creating a dummy sfd to hold the SRTCP context when we don't
have an actual RTCP port, we must make sure to remember and re-use this
dummy sfd during a re-invite. Otherwise we end up creating a duplicate
dummy sfd, which is detected as a different sfd and thus triggers an ICE
restart.
Change-Id: Iadc91e163bd15a3cd5f57656b52941724c920143
Explicitly copy SDP up to the format list before printing it out. This
preserves broken input SDP.
closes#1461
Change-Id: I839a200f159f25854c86add244571a948e2c90cf
Setting the mux flag when rtcp-mux is given is fine, but we must still
provide an RTCP endpoint in case rtcp-mux ends up not being used, either
through an implicit RTCP endpoint or through a=rtcp.
relevant to #1443
Change-Id: I0710a50c31974f5e06bd94b47076a272bcca7a43
(cherry picked from commit e3951449ed)
There's no need to open ports on non-primary interfaces if ICE is not in
use as these ports will not be used or seen by anyone.
This mostly obsoletes the `save-interface-ports` config option, with the
exception of ICE advertised by the offerer. We currently have no option
to reject ICE from the offerer during the offer phase, so ports would
always be opened on that side.
Relevant to #1164 and 001abe5
Change-Id: I43df70bc0ec49b81f63aec97c776e48617b2acfd
This enables the same behaviour towards the offerer when rtcp-mux=demux
or =accept is used, as we have towards the answerer when
rtcp-mux=require is used.
Change-Id: I56a1cea84efce0c2db1b58c500629d0e54d582f4
Special handling for codec lists that were received as part of an
answer: If the list includes a codec that was not offered, ignore that
codec. This prevents transcoders from being set up that were not
requested.
This brought to light some tests that were actually broken.
Change-Id: Iac71056ec5e10b5de5567917974f2c4e0261eb0c
We must now hold the master lock for reads from the socket as the socket
may get closed after the poller has already fired an event for it.
Change-Id: I1ab4b38f09988e8569a70c449de17c208ef2aa96
If DTLS is rejected in an answer via `DTLS=off` we must forget that DTLS
was previously offered, as otherwise a re-invite would detect the
fingerprint as changed if the re-invite doesn't offer DTLS again. We
also make sure DTLS is shut down if during stream init DTLS is not
given, when it was present before.
Change-Id: I48ee6f0ec5ec02f558a6799951552ea2272d0e96
All crypto suites except AEAD have an explicit packet authentication
stage. If authentication fails for a packet, we take some guesses about
a ROC mismatch and see if authentication can succeed with a different
ROC. If a working ROC is found, our tracked ROC is updated and
decryption proceeds.
AEAD doesn't have an explicit authentication stage and authentication is
performed implicitly by the decryption engine, which simply returns a
decryption error if the authentication fails. We must therefore add the
same ROC guessing logic at this step for AEAD.
Change-Id: Ic1a70daa667e23976b74d2303c823b8d8c7bcb2b
This is useful for functions which are used both from a timer and from
other callers. These functions would reset the logging context at their
end to free the reference held by the logging context, which would
wrongly reset the logging context when the same function was called from
a different code path. Using a stack with push/pop semantics makes it
safe to use these functions from any code path.
Additionally introduce an explicit reset function that clears the entire
stack regardless of context. This reset function is called at the end of
every work iteration in every worker thread, just in case not everything
was popped from the stack.
Change-Id: I0e2c142b95806b26473c65a882737e39d161d24d
If the config only lists a port for the HTTP/WS bindings then we must
not try to create both a v4 and a v6 binding on that port as
libwebsockets handles the 4/6 mapping internally. In this case we make
sure to only create the v6 binding.
Further requirement for #1432
Change-Id: I9bf7ec5c041d0b5d4a22d507d993b85e2d4d3155
Add an explicit test to see if libwebsockets has been compiled with
support for IPv6. If it hasn't then we don't try to create v6 bindings.
Closes#1432
Change-Id: I6902f5b4203aa09cb28a8edb46f97b339677ed75
commit a2e5cfb8e5
Author: Razvan Crainea <razvan@opensips.org>
Date: Thu Jan 13 16:16:19 2022 +0200
Add tests for subscribe requests on paused media
commit fa58596a9f
Author: Razvan Crainea <razvan@opensips.org>
Date: Wed Jan 12 22:01:27 2022 +0200
Swap media direction check for `subscribe request`
as @rfuchs mentioned in his review, the SEND/RECV media flags are set
according to rtpengine's perspective, not the media flow's one.
commit e1e9a157c0
Author: Razvan Crainea <razvan@opensips.org>
Date: Wed Jan 12 19:27:42 2022 +0200
Fix `subscribe request` SDP media direction
When building the SDP for a `subscribe request` command, take into
consideration the media direction of the source stream - if stream is
`recvonly`, then we do not have anything to send, thus the direction
should be advertised as `inactive`, rather than `sendonly`.
Change-Id: I2d78bbec8ad584774f3c90f0ce5cca42f57f7b0f
Instead of having each thread sleep only a little while and then
periodically check for the shutdown flag, make them sleep longer and use
pthread_cancel() to interrupt the sleep during a shutdown in the
designated break points.
Change-Id: I13f1872a0176697e064ceef4062db6ca6ccf7a0e
Handling of dual stack v4/v6 was previously done by the individual
listener objects for INADDR_ANY listening addresses. If listening on
INADDR_ANY was requested, then each listener would create two instances,
one for IPv4 and one for IPv6. This works fine for INADDR_ANY but fails
for listening on host names that resolve to multiple addresses, such as
`localhost`.
Solve this by relieving the listener objects from handling this and
instead handle it in the code setting up the listeners. If a host name
resolves to multiple addresses, then set up multiple listeners (up to
two supported currently). This allows us to listen on `localhost` by
default and have both 127.0.0.1 and ::1 active. INADDR_ANY is handled
specially by also setting up :: in that case.
Change-Id: I2a1e1d7090d7d23863c7a9bb1e89b85ad2ea44f4
Allow usage of "any" as interface config option to configure any and all
locally present network address, except loopback. This allows us to ship
a working default config file.
Change-Id: Ic13efd5f668e3bb317948b226c5700331f95a708
Needed to be able to set graphite socket timeout.
Useful when one wants rtpengine to force the graphite connection
to fail faster, in case graphite server gets filtered while
connection is ongoing.
Supplemental codecs such as DTMF use static timestamps while the event
is ongoing, leading to a TS jump when the RTP flow changes back to
audio. The sequencer needs to be aware of this so it doesn't mistakenly
see the next audio packet as overdue and starts to process it
prematurely.
Change-Id: I2faea9aceec21fc04920f6c3c94141725383379f
... for scheduling output RTP packets. This is mostly relevant for DTMF
packets which don't have an associated encoder when being forwarded.
Change-Id: I56ee94a9ac7f42cc65eec0703bf042065687e43f
Richard Fuchs
Razvan Crainea
hdikme
Stefan Mititelu