It substitutes a specified `a=` line taken from the concerned
media attributes list. If such line has been not found,
the attributes list remains untouched.
It subsitutes one attribute at a time, so one attribute into
another attribute.
Change-Id: Ie0a48ba46a1b196fbe33b09dedc40e4498640e34
These tests depends on an additional feature ("end event") that hasn't
been implemented yet. Disable these tests for now.
Change-Id: I54186cb5a1ed9119497fc05d7760d207a981cffa
Generate the output fmtp= string based on the preferences received from
the opposite side. Also add the required format printing function.
Change-Id: I12124efe0b9876c6571bc32c1c45744af80b83d3
This commit parses out the string, but doesn't do anything with the
values except for the FEC flag. Move the FEC on/off switch from the
extra codec options into the `fmtp` string.
Change-Id: I51f74f7cb62dd49a9af9815920f077bf300cfa33
Similar to the existing media_player, but instead of simply producing
its own standalone output media stream, the audio_player takes over the
entire media stream flowing to the receiver, including media forwarded
from the opposite side of the call, as well as media produced by the
media_player.
Change-Id: Ic34ecf08fc73b04210cfffb1a7d795b462ece5ea
... as an extra offset for newly added sources, based on the difference
between the last runtime (read time) of the buffer and the current time.
Change-Id: Ie99e24f0697f0950f0fcfa1e5e58b8f4be134018
A simple circular audio buffer that allows mixing multiple sources of
audio. Sources are tracked by SSRC and all sources are expected to
provide audio in the same format (same clock rate, channels, sample
format).
Only one consumer per buffer is supported, which is expected to retrieve
buffered audio at regular intervals (ptime) and so continuously empty
the buffer.
The first audio source to write into the buffer at the leading edge of
the circular buffer has its audio simply copied into the buffer, with
the leading edge advanced, while other later sources writing into the
buffer mixed into the existing buffered audio at their respective write
positions.
Change-Id: I0f6642b036944508f2a33420359de488ef8b991c
The test number 1142:
"SDP attr manipulations - add a= line for media audio, two times"
used to fail on the buster builds, because of the hash tables
implementation we had in the `command_values` of the `struct sdp_command`.
It didn't necessarily keep the same order, as was used to add values.
Now as the SDP manipulations structures is re-designed, we can re-add it.
Change-Id: Icc7d030894d45c9d62e91669915eafb348d05d97
The test number 1142:
"SDP attr manipulations - add a= line for media audio, two times"
fails on the buster builds, because of the hash tables implementation
used in the `command_values` of the `struct sdp_command`.
It doesn't necessarily keep the same order, as was used to add values.
Temporarily removing it, until the `struct sdp_command` is re-designed.
Change-Id: I077771c00c5dc8907e42d7757540e3ffa2063af6
Don't change to a new port for sendonly streams as this causes problems
with NAT. A device receiving a sendonly SDP with a new port won't send
any RTP to the new port, leading to a closed (non existent) NAT mapping.
Change-Id: I2ea2163eb9f1203226bd781b53f421c790a86f0a
New section of option flags has been introduced for SDP body
attributes manipulations.
Three levels of the SDP session are concerned:
- session level (global one)
- media level - audio
- media level - video
Three different actions are supported for now:
- add
- remove
The value of the command has a wildcard matching approach.
Other attributes apart `a=` can not be edited by this functionality.
So such headers as: `c=`, `s=`, `o=` cannot be touched.
Change-Id: I939d4582839096b2399f7ded865e91ff6eb960a4
(cherry picked from commit 3f06c18793fe95e5b070044a0291a3e1528ac6e4)
Only parse out a codec type if the codec is given with any parameters
set (and not just by name). Parsing out a codec type when just its name
is given leads to a codec type with default parameters set (such as the
number of channels) which can lead to a stricter matching than desired.
When a codec is given just by name we want to match all codecs of that
type, not just the ones with the same parameters as the default ones.
Change-Id: I583bf4045dbd55291d8dc596310730024853d386
There's no point in sampling Graphite-specific stats, nor in reporting
them out, if Graphite is not enabled.
Change-Id: If8014513832485f38d81b478c695391129c21dff
Distinguish between two different types of "gauge" type metrics: Actual
gauges which (at least conceptually) have a single continuous value, and
metrics which are comprised of discretely sampled values, possibly from
multiple sources.
Real gauges with continuous values don't have mean/average/deviation
values directly associated with them, as calculating these requires
sampling or some other analysis.
Sampled metrics on the other hand do have these associated values.
Clarify which function does what and where each value comes from.
Change-Id: Iff5dd844b70ff70979b1b8c84dc7734d44b3da20
Rename structs and variables to make it clear that these min/max values
are min/max per-sec rate values.
Carry mins and maxes separately from averages. This changes the meaning
of $command_ps_avg away from an "average of averages" to an actual
average, which is more accurate.
Calculate this average based on per-interval differences and interval
duration (stats_rate_min_max_avg_sample).
Side effect: As rtpe_latest_graphite_interval_start is now set in
print_graphite_data instead of in graphite_loop_run, the test now
reports a different "interval calls duration".
Change-Id: I67b1118c18ca2464a48c4836fca3cfdb4d53c898
Perform accumulation of stats only once (i.e. increasing an actual
counter) and report stats based on differences to previous values,
instead of carrying multiple stats counters for each metric and
resetting each counter to zero whenever stats are reported.
`rtpe_stats` is the global master accumulator.
`_intv` variables are intermediate and local storage for values sampled
from `rtpe_stats` at regular intervals.
`_rate` and `_diff` variables hold stats calculated from `rtpe_stats`
and the respective `_intv` variable whenever the sampling and reporting
occurs.
`stats_counters_calc_diff` is used to calculate stats as differences
between `rtpe_stats` and the last sampled `_intv`
`stats_counters_calc_rate` does the same but calculates a per-second
rate, based on a microsecond duration.
Eliminate now-useless struct global_stats_ax
Change-Id: Ic4ca630161787025219b67e49b41995204d60573
This fixes the payload counts not being tracked correctly when payload
types repeat after the tracker rolls over.
Change-Id: I16208ef73f3af3b051b96541a4c145b323cef7b2
According to:
{
"request" : "join",
"ptype" : "subscriber",
"room" : <unique ID of the room to subscribe in>,
"use_msid" : <whether subscriptions should include an msid that references the publisher; false by default>,
"autoupdate" : <whether a new SDP offer is sent automatically when a subscribed publisher leaves; true by default>,
"private_id" : <unique ID of the publisher that originated this request; optional, unless mandated by the room configuration>,
"streams" : [
{
"feed" : <unique ID of publisher owning the stream to subscribe to>,
"mid" : "<unique mid of the publisher stream to subscribe to; optional>"
"crossrefid" : "<id to map this subscription with entries in streams list; optional>"
// Optionally, simulcast or SVC targets (defaults if missing)
},
// Other streams to subscribe to
]
}
{
"videoroom" : "attached",
"room" : <room ID>,
"streams" : [
{
"mindex" : <unique m-index of this stream>,
"mid" : "<unique mid of this stream>",
"type" : "<type of this stream's media (audio|video|data)>",
"feed_id" : <unique ID of the publisher originating this stream>,
"feed_mid" : "<unique mid of this publisher's stream>",
"feed_display" : "<display name of this publisher, if any>",
"send" : <true|false; whether we configured the stream to relay media>,
"ready" : <true|false; whether this stream is ready to start sending media (will be false at the beginning)>
},
// Other streams in the subscription, if any
]
}
Change-Id: Ieb38d4f562686283457a963334056b27927be974
This is a new option flag, which provides a possiblity
to select specific crypto suite(s) for the offerer from
the given list of crypto suites received in the offer.
This will be used later on, when processing an answer from
the recipient and generating an answer to be sent out towards offerer.
Furthermore, this is being decided not when the answer is processed,
but already when the offer is processed.
Flag usage example:
`SDES-offerer_pref:AES_256_CM_HMAC_SHA;AES_256_CM_HMAC_SHA1_32;`
Change-Id: I2b22b38347d24f27331482e18b92305fbadb2520
Older versions of glib handle the trailing padding in base64
differently, resulting in the final character of the encoded string
coming out different.
Change-Id: I2bc1057de15f5e0bddb3de4df6cef7c4fcf7ebcc
Richard Fuchs
Michael Prokop
Donat Zenichev