now that the returned last_event_ts is always that of the previous
DTMF, we can ensure that the next one isn't transmitted until that
time plus the required pause.
Like the num_samples calculation, the actual time needs to be
increased by 1 packets worth of samples so tha pause lasts the
full duration required
Change-Id: I6da1dd7cbcf49f7f0431a5123df2cdc382fe3dba
(cherry picked from commit e12e408ee3)
this function is used to determine if a pause is needed on a new
injected DTMF's start ts to ensure a gap between the events. However,
if an inject request comes in after the end of the previous event
but before it would have been offset due to pause, no pause is added
This change returns the ts value from dtmf_state if the queue is
empty as that will always be the ts of the last DTMF transmitted
Change-Id: I4f3cf5115d1a8e26c0ca1bc9570c46e29391e0d0
(cherry picked from commit bdb1022677)
the num_samples was added to the start_pts, which is the first event
packet timestamp, which has already increased its ts by its event
duration. so, the total duration of events ends up being one packet
more than intended.
Change-Id: I423bb222a81c5bd78e570ff2026c72dd4dd1b100
(cherry picked from commit c92748dc9d)
Make sure we increase the output RTP sequence
number for each generated packet in the case
of packets that need to be duplicated or sent
repeatedly (DTMF end event)
Change-Id: Ia16ffefc0791d01575248ac5d8025eb30ccaec67
(cherry picked from commit 41a9894cce)
If multiple pollers are in use, use a single poller per call instead of
assigning pollers round-robin to each socket used in the call.
Change-Id: Iec49bd9d2fbd75d947d6232bcccfdfe87c4c6d7c
The poller-per-thread feature was broken with a division by zero. Take
the opportunity to rework it and eliminate the poller_map object. Use a
simple array of pollers for media sockets, plus one global poller for
control sockets. In the regular case only one poller is created and
everything points to that poller. In the poller-per-thread case, one
poller per thread is created, plus one poller (also with its own single
thread) for control connections. All control sockets use the single
control poller, while all media sockets get assigned one poller from the
pool in a round-robin fashion.
closes#1801
Change-Id: Iae91a3e10b7206455c6df33b1a472254c700ce21
For convenience we provide extra HTTP and WS endpoints that accept a
cookie-less NG or JSON message string. Not all commands are sensitive to
retransmits and this makes it easier to query call status etc.
Change-Id: Iffbc4ef9a5fdf916a374dfdd4042c61b437d18c9
Consider call_media SDP attributes as ones that were received instead of
the ones to be sent out. Use media subscriptions to look up the source
media and print that one's attributes when creating an outgoing SDP.
Change-Id: Ibdf3a77a6f8a61654e0fc7c14aae16dfc6eabf14
Fix up tests to match reordered attributes.
Remove 10-year-old a=ssrc parsing code completely as it's unused.
Change-Id: I78064b1b2f27a442fe8bf4b448c7174c5458d3b1
Some of these are actually wrong at this point, and will be fixed up in
later commits when the outputs are correct
Change-Id: I12d264a73f44e5356912b34bd22d7075067df190
Graphite isn't able to deal with spaces in the metric names delivered to
it. Introduce special version of the command strings with spaces
replaced by underscores.
closes#1780
Change-Id: Ie8bcec5ca4f2d427e92901f6fa76b985df6e459e
Instead of using transcoding flag `_TRANSCODING`
on the monologue level, we have to use that on the media
level in order to properly reflect the level on which
transocding is being used, and also to be able to selectively
set this for specific media sessions.
Change-Id: I9a25dc7be24f80b2b6ada816448a67933c762d86
During an offer, we update the codecs from the given list not only on
the side of the offerer, but also on the answerer's side, in order to
perform the codec answer routine during the answer phase. While doing
this, we empty out the existing list of codecs (on both sides) and
repopulate it fresh from the given list.
This can cause problems during a reverse re-invite, when the list of
codecs on the answerer's side already contained the codecs that had been
offered before. When setting up the new re-invite offer, we want to
retain codecs (and their payload types and format parameters) that were
already in place, instead of recreating a new list from scratch.
Improve this by adding a `merge_cs` option to the populating functions,
which points back to the stream_params codec_store. Codecs that would
have been removed from the codec_store during the repopulation are then
moved back into the stream_params codec_store instead. This then allows
the functions adding new codecs to the list (offer/transcode) to
reference these codecs that were previously in place, and so they can be
added back with the same options as they had existed before, instead of
recreating them from scratch.
Change-Id: I53e7ab10e9144a308a5c36be5ebfddd73c212f06
Add handling of SDP session level attributes for:
- `monologue_subscribe_request()`
- `monologue_subscribe_answer()`
This will be used by `janus.c` related functionality.
Change-Id: I1c50b5b9da08e7d8cb2c98eb6995d8610386d6ed
Move `a=extmap:` attribute to the `call_media`'s
`sdp_attributes` using `stream_params`.
Required by the `insert_sdp_attributes()` used in `sdp_create()`.
Additionally revert `extmap` unit test checks in the
`testVideoroomWebRTCVideo`.
Change-Id: If63e4e8733ea0899f34fae1f1d38997e9e2c081c
Move `a=ssrc-group:` attribute to the `call_media`'s
`sdp_attributes` using `stream_params`.
Required by the `insert_sdp_attributes()` used in `sdp_create()`.
Change-Id: I67025dc83dd8e5e46422b6dc1bc54aa9c838dfea
We have to move the list of attributes with following types
to the `call_media`'s `sdp_attributes` using `stream_params`:
ATTR_SSRC
ATTR_MSID
ATTR_OTHER
This is then required by the `insert_sdp_attributes()`
used by:
- `sdp_replace()` -> `replace_sdp_media_section()`
- `sdp_create()`
Additionally: move the `insert_sdp_attributes()`
to the usage of the `append_attr_to_gstring()`, which
gives SDP attrs manipulations control over attributes
being inserted into SDP. Previously not supported.
Additionally: `process_media_attributes()` takes new
argument `bool strip_attr_other`, in order to control
whether or not to strip `ATTR_OTHER/ATTR_SSRC/ATTR_MSID`.
For now there is only one user of it `replace_sdp_media_section()`,
but for later on, we can control this using this bool.
Additionally: `print_sdp_media_section()` takes new
argument `bool print_other_attrs`, in order to control
whether or not to strip `ATTR_OTHER/ATTR_SSRC/ATTR_MSID`.
This is required, because the sdp replacing/creating mechanism
needs a controllable way of adding them, users are:
- `janus_videoroom_join()`
`janus_videoroom_configure()` - always need them
- `call_publish_ng` - always needs them
- `call_subscribe_request_ng` - never needs them
(otherwise leads to a duplication of such attributes)
- `call_offer_answer_ng()` - requires them always
- `call_subscribe_request_ng()` - never needs them
(otherwise leads to a duplication of such attributes)
Change-Id: I9c83d99da1603acb55443c462797b2cd1e72477d
Stop using the call subscriptions model in the
subscribe request/answer functionality and move to
the media subscriptions.
Change-Id: I8aab2b1b4cdf9a3c5a04172c395ca509295ce0a3
The global list of monologues is populated in reverse order from the
list of medias. Iterate the list backwards so that the resulting medias
are in ascending order.
Change-Id: Icadca7a6cecb636ca6e021c0286b44e5cd3cdc84
Richard Fuchs
Tom Briden
Donat Zenichev
Steven Ayre