This only exists because of RTCP indexing issues, but with the index
being in shared memory now, we no longer need this.
Change-Id: Ib0a69214f24a7c1edec8aa53139212ee861a6c4d
In the header files follow the rules:
1. Firstly goes ifndef/define construction, then one empty row.
2. Secondly go system headers, so in angle-brackets, then one empty row.
3. If there are important pre-processor definitions, which affect
the following custom file headers, they are added next, then one empty row.
4. Thirdly custom header files, so in double quotes,
then at least one empty row.
5. If there is "xt_RTPENGINE.h", it's mentioned next, but separately,
then one empty row.
6. Then pre-processor definitions, and one empty row before the code.
In some situations it's allowed to step aside from the rules,
when inclusions are dependent on each other, so on specific sequence,
and also possibly on some inline objects definitions.
But, if possible to follow the rules, it should be done.
Change-Id: I6bec69b508653947c04e7785775373d21112eb58
Allow codec_tracker_update to reference an existing codec_store. Then
when a supplemental codec type needs to be generated, make it look up
the type in the existing codec_store and re-use the existing payload
type if present instead of creating a new one. This allows payload type
numbers to remain unchanged during a re-invite.
Change-Id: I9e5edd897515a5e3eb5033aa6bbf21c8667d6133
During an offer, we update the codecs from the given list not only on
the side of the offerer, but also on the answerer's side, in order to
perform the codec answer routine during the answer phase. While doing
this, we empty out the existing list of codecs (on both sides) and
repopulate it fresh from the given list.
This can cause problems during a reverse re-invite, when the list of
codecs on the answerer's side already contained the codecs that had been
offered before. When setting up the new re-invite offer, we want to
retain codecs (and their payload types and format parameters) that were
already in place, instead of recreating a new list from scratch.
Improve this by adding a `merge_cs` option to the populating functions,
which points back to the stream_params codec_store. Codecs that would
have been removed from the codec_store during the repopulation are then
moved back into the stream_params codec_store instead. This then allows
the functions adding new codecs to the list (offer/transcode) to
reference these codecs that were previously in place, and so they can be
added back with the same options as they had existed before, instead of
recreating them from scratch.
Change-Id: I53e7ab10e9144a308a5c36be5ebfddd73c212f06
From now on the `call_subscription` concept gets
deprecated, and instead of it the `media_subscriptions`
concept gets applied.
Benefits of this change is:
- ability to subscribe one-to-multiple medias (different monologues)
- media level manipulations, without affecting whole SDP session
- no need to use medias offset, to detect proper subscription's media
- there is no need of particular medias order, they can be
subscribed to each other in any possible way
(even though RFC still requires to always have proper ordering)
Deprecated objects:
- `struct call_subscription`
- `GQueue subscriptions`
- `GQueue subscribers`
- `GHashTable * subscriptions_ht`
- `GHashTable * subscribers_ht`
Deprecated functionality:
- `__unsubscribe_one()`
- `__unsubscribe_all_offer_answer_subscribers()`
- `__unsubscribe_from_all()`
- `__subscribe_offer_answer_both_ways()`
- `__add_subscription()`
- `__unsubscribe_one_link()`
- `call_get_call_subscription()`
- `call_subscriptions_clear()`
- `call_subscriptions_free()`
Offtopic: additionally this commit adds helper func:
- `call_media_subscribed_to_monologue()`
Change-Id: Ifb44f7a1ba5b483b1472882b1b8d06444dba1727
If we're updating the handlers for one particular source -> sink flow,
only stop/reset the handlers matching this flow.
Change-Id: I1d046f47f8d26cac47c5d0f4318498eacb6c5677
Previous implementation assumes that we use the `call_subscription`
objects in:
- `call_offer_answer_ng()`
- `call_update_lookup_udp()`
- `call_request_lookup_tcp()`
when appealing to the `call_get_mono_dialogue()`, in order to
get the `call_subscription` objects, in order to then pass it
for usage in the `monologue_offer_answer()`, where the most important
again is to use monologue references stored inside
the given `call_subscription` objects.
Instead of using the `call_subscription`, just use `call_monologue`
objects as a base data objects for this work,
which will allow us in the coming commits to deprecate
the `call_subscriptions` based model and
get to the subscription model based on medias.
Change-Id: Ia9ee5ba66522929acbceca28854ebccd3705635a
Pass the subscription object to codec_handlers_update to eliminate the
need for a return type and the subsequent if/else.
Change-Id: I311b3e8ca14ee5090cf329163975354385cee800
Support using the SSRC TS derived from received RTP packets as "encoder"
TS (the "next" expected TS) for passthrough RTP in addition to the FIFO
TS of an actual encoder.
Change-Id: I7c49c27651eb89c5349bbf290b1c0ad160f77e3b
Special handling for codec lists that were received as part of an
answer: If the list includes a codec that was not offered, ignore that
codec. This prevents transcoders from being set up that were not
requested.
This brought to light some tests that were actually broken.
Change-Id: Iac71056ec5e10b5de5567917974f2c4e0261eb0c
commit b0c722da69ad088a2eddced12b37c0546a514890
Author: Daniel Hauptmann <dhauptmann@sipwise.com>
Date: Mon Jul 26 15:35:51 2021 +0200
changed flag bit length
in call_interfaces.h changed bit length of reuse_codec from 0 to 1
commit 0313a747532d5987f25fa9edb202aa460bf98dd1
Author: Daniel Hauptmann <dhauptmann@sipwise.com>
Date: Mon Jul 26 15:29:20 2021 +0200
inversed reuse_codec logic
in test-transcode.c and call.c, reuse_codec = 0 (default) will now result in using codec_store_populate instead of codec_store_populate_reuse
commit b876bd686bd30df21a5962aca16fc1c85574f554
Author: Daniel Hauptmann <dhauptmann@sipwise.com>
Date: Mon Jul 26 15:18:19 2021 +0200
adding option to minimalize changes in the codec_store_population
added function codec_store_populate_reuse in codec.c which replaces codec_store_populate but makes fewer changes to the GLists with the old and new codecs
added flag to enable this feature (disabled by default)
commit 6fd0b701c9589b2fae00300801e02a9b5cc397ab
Author: Daniel Hauptmann <dhauptmann@sipwise.com>
Date: Mon Jul 26 14:44:42 2021 +0200
Added Option to minimize change in the codecs
In codec.c added function to populate codec store with the fewest changes between the old and new GList which contains the codecs.
Added new testroutine in test-transcode.c line 1500
Added flag to call_interfaces.h to optionally enable this feature
Change-Id: If58d9a07d114b05dfb75553a87eb4372ae949fbb
commit 3bf554a8fbae7e948343699f40d935693618b764
Author: Daniel Hauptmann <dhauptmann@sipwise.com>
Date: Fri Jul 23 13:58:02 2021 +0200
changing codec-exchange behaviour
in codec.c line 3288 function codec_store_populate now doesnt empty dst and copy new codec from src to it, instead codecs from src will be appended to dst and codec from dst, which are not
being contained by src are being removed
Change-Id: Id6b7ee65595f9cc5c71ef557c7bac5ee38f97cbe
Richard Fuchs
Donat Zenichev
Orgad Shaneh
Tom Briden
Daniel Hauptmann