Moving code for handling (queuing, dequeuing) trickle ICE fragments into
ice.c, where it makes no sense. No functional changes.
Change-Id: Ib68f82e8d58efe066fdc48cd32ca9869cdeab846
This is slightly more performant as it does the retrieval and removal
with just one lookup instead of two.
Change-Id: Iba702704218ac4689a6788fd23a792ad40460ea8
We're also in controlling role for subscribe answers.
Make sure we don't clobber the source media's ICE options when adding a
subcriptions.
Change-Id: I5361462aefdbbe6411841332b69a8dc4b0e1e013
Using a pointer array instead of a linked lists allows us to directly
reference a media section by index number, without having to spool into
the linked list.
No functional changes.
Change-Id: I8b0e93f0c2e9addbcb4c938894118ed4a6aec768
If a subscribe answer says that it doesn't want to receive any media
(i.e. `inactive` - `recv` flag unset), clear our corresponding `send`
flag so that we actually don't send media there.
Change-Id: I8862cc6f4121a82c723a8303ba70345d064cd243
... which is the more direct way to copy a bit flag in a mirror fashion,
instead of doing an if/else.
Change-Id: I7283d31f7a44e6bf1ee15ea1c14cb3b8fe0293b9
Track audio writes in the mix buffer to set the `active` flag to true
whenever a write occurs, which makes it possible to create the buffer in
an inactivate state and implicitly set it active on demand.
Handle the mix buffer not returning any data in the RTP sending logic
(which is what happens for an inactive buffer) by simply not sending any
packets.
Change-Id: Iaeb0f6deadb3d90020c8c62872735cc94db80504
Similar to the existing media_player, but instead of simply producing
its own standalone output media stream, the audio_player takes over the
entire media stream flowing to the receiver, including media forwarded
from the opposite side of the call, as well as media produced by the
media_player.
Change-Id: Ic34ecf08fc73b04210cfffb1a7d795b462ece5ea
Don't change to a new port for sendonly streams as this causes problems
with NAT. A device receiving a sendonly SDP with a new port won't send
any RTP to the new port, leading to a closed (non existent) NAT mapping.
Change-Id: I2ea2163eb9f1203226bd781b53f421c790a86f0a
The old port latching logic was simply to use the last (newest)
allocated endpoint_map. This turned out to be wrong, because the last
used socket on the monologue could have been one that was allocated
earlier (and older endpoint_map), as it can happen during repeated
re-invites. Add a new function to actually look for the correct
endpoint_map, matching the currently used socket, to make sure the port
doesn't change.
Change-Id: Iae768fe48539264575aed67cbbb6b08ac745130f
Defined in RFC 8842. If a tls-id was previously given and a the new SDP
shows a different tls-id or none at all, we must restart DTLS.
Relevant to #1585
Change-Id: I554234dfcacbd330c7a0c6aea68f24d0449cba21
Rename structs and variables to make it clear that these min/max values
are min/max per-sec rate values.
Carry mins and maxes separately from averages. This changes the meaning
of $command_ps_avg away from an "average of averages" to an actual
average, which is more accurate.
Calculate this average based on per-interval differences and interval
duration (stats_rate_min_max_avg_sample).
Side effect: As rtpe_latest_graphite_interval_start is now set in
print_graphite_data instead of in graphite_loop_run, the test now
reports a different "interval calls duration".
Change-Id: I67b1118c18ca2464a48c4836fca3cfdb4d53c898
Perform accumulation of stats only once (i.e. increasing an actual
counter) and report stats based on differences to previous values,
instead of carrying multiple stats counters for each metric and
resetting each counter to zero whenever stats are reported.
`rtpe_stats` is the global master accumulator.
`_intv` variables are intermediate and local storage for values sampled
from `rtpe_stats` at regular intervals.
`_rate` and `_diff` variables hold stats calculated from `rtpe_stats`
and the respective `_intv` variable whenever the sampling and reporting
occurs.
`stats_counters_calc_diff` is used to calculate stats as differences
between `rtpe_stats` and the last sampled `_intv`
`stats_counters_calc_rate` does the same but calculates a per-second
rate, based on a microsecond duration.
Eliminate now-useless struct global_stats_ax
Change-Id: Ic4ca630161787025219b67e49b41995204d60573
... so that the publishing session gets notified about "webrtcup" and
not the session which created the room.
Change-Id: If7b308df4afa7afb19ecaca1f743f87c3c736007
This is a new option flag, which provides a possiblity
to select specific crypto suite(s) for the offerer from
the given list of crypto suites received in the offer.
This will be used later on, when processing an answer from
the recipient and generating an answer to be sent out towards offerer.
Furthermore, this is being decided not when the answer is processed,
but already when the offer is processed.
Flag usage example:
`SDES-offerer_pref:AES_256_CM_HMAC_SHA;AES_256_CM_HMAC_SHA1_32;`
Change-Id: I2b22b38347d24f27331482e18b92305fbadb2520
1872 /* first add those mentioned in the order list,
1873 * but only, if they were previously generated/added to the sdes_out */
>>> CID 1530346: Control flow issues (DEADCODE)
>>> Execution cannot reach the expression "NULL" inside this statement: "l = (cpq_order ? cpq_order-...".
1874 for (GList *l = cpq_order ? cpq_order->head : NULL; l; l = l->next)
Change-Id: I58f84ba82d215a9eb6cbd97548e8e9e8a954bdc6
This is a new option flag, which provides the ordered list,
in which to add crypto suites into the SDP body.
Right now they're always added in the order given in the source code.
Flag usage example:
`SDES-order:AES_256_CM_HMAC_SHA;AES_256_CM_HMAC_SHA1_32;AES_192_CM_HMAC_SHA1_80;`
This means — those listed SDES crypto suites will be added
into the generated SDP body at the top of crypto suites list, in the given order.
But, each of them is added, only if it is about to be added/generated.
In other words, the `SDES-order:` flag itself doesn't add crypto suites,
it just affects the order of those suites to be added.
And the rest of non-mentioned suites, which are also to be added,
will be appended after those given, in the free manner of ordering.
Important thing to remember - it doesn't change the crypto suite tag
for the recipient, even though changing the order of them.
Additionally.
This flag does not contradict with `SDES-nonew`, `SDES-only-` and `SDES-no-` flags.
It just orders the list of crypto suites already prepared to be sent out.
Change-Id: I0fec54f9e2f3cd4913e905e8afe825712f82d1ae
A new function dedicated to SDES crypto suites policy checks
has been introduced: 'crypto_params_sdes_check_limitations()'.
Use it to decrease an amount of repeating code blocks
related to SDES checks.
Change-Id: I0ac242a63107a9f3a41f95a57e3d3675645ac18d
Add a new flag to only accept these individual crypto suites
and none of the others.
For example, `SDES-only-NULL_HMAC_SHA1_32`
would only accept the crypto suite `NULL_HMAC_SHA1_32` for
the offer being generated.
This also takes precedence over the `SDES-no-` flag(s),
if used together, so the `SDES-no` will be not taken into account.
This has two effects:
- if a given crypto suite was present in a received offer,
it will be kept, so will be present in the outgoing offer; and
- if a given crypto suite was not present in the received offer,
it will be added to it. The rest, which is not mentioned,
will be dropped/not added.
Flag name: 'SDES-only-<crypto name>'
Additionally: add another new flag 'SDES-nonew'.
It will not add any new crypto suites into the offer.
It takes precedence over the `SDES-no` and `SDES-only` flags,
if used in combination.
Change-Id: Ic4fa03957ee3d4d24b0c4f3fd003eada05f49b0b
Unmark a monologue that has been scheduled for deletion when it's
associated with another one, which happens during offer/answer.
Fixes a regression from 53dbef7e1 which removed this logic from
__monologue_unkernelize with re-adding it elsewhere.
Change-Id: I037162e91fec42631680f7767f58b172fd6e04db
`call_get_monologue_new` is supposed to always return a full dialogue,
but an error in invocation (using a from-tag that doesn't belong to an
offer/answer) can lead to the second half being unset. Return an error
in this case.
Change-Id: I84b21ff5e5c0403fc07cae83fee206705ecff8b3
Use the new `associated_tags` table to determine which tags are
associated with which. Iterate the associations between tags in a
tree-like manner and do this at the moment the `delete` command is
received. Break up the `associated_tags` links at this time, and
determine which tags would be left dangling and mark all of these for
deletion. If no tags are left after this process, mark the entire call
for deletion.
The previous approach was cumbersome and prone to errors. Using tag
names and branch names to determine which tags are associated with which
is a pointless hurdle, and using a table of associations that is
explicitly kept for this purpose is a much cleaner approach. Also
postponing the decision about which tags to delete until the time the
deletion actually happens can lead to tags not being deleted, when they
really should be (e.g. A -> B, delete A, A -> C).
Change-Id: I03ae57d0a2117ecd721372c1a49468fc34dd630c
Keep track which tags (monologues) were created together as part of an
offer/answer exchange with a separate hash table, regardless of whether
these monologues actually have tagged names or are just nameless
branches.
Change-Id: I60aa114c8caf6ecdff4705e3399f60190d04dda6
During offer/answer, we remove existing subscriptions before
re-establishing the new set of subscriptions. But we must also remove
the subscriptions of previous subscribers in order to keep the lists of
subscriptions and subscribers correctly reciprocal.
Change-Id: I7d39fa59892159f41033ae6a40e7cb51d861b12e
Support multiple tone frequencies for DTMF-security=tone to enable
audibly distinguishing multiple consecutive DTMF events from one
another.
Change-Id: I6fa33a5768aae198220d0b0cc4c53308c5661a52
Based on the information gotten from Richard Fuchs
document the main objects in the code, to let the code be more
understandable for other code readers.
Mainly documented:
- call
- call_monologue
- call_subscription
- call_media
- packet_stream
- stream_fd
- sink_handler
- rtpe_callhash / rtpe_callhash_lock
Change-Id: I0cf122bea2d9c3f198b48da134a70301564ff1f9
Legacy protocols don't set sp->num_ports. Use a sensible default for
this case.
Probably a regression from 2d2d7665b
Change-Id: Idcbc477a68b6db70a91a5d082736ac642c50ab15
This makes it possible to have different media silencing options for
different outputs. Functionally this commit alone is a no-op.
Change-Id: I967c3e07ea4645bb49ccb76db12d51ded2d72f06
Create a dedicated struct to hold certain attributes shared by both sink
handlers and media subscriptions, as a preparation to simplify handling
these attributs.
Change-Id: I866159c33ed6d6a2873d2cf68c4906ea705d253e
If an offer is going to a side that is already known to support
rtcp-mux, don't try to offer a fallback RTCP port. Do this by pretending
that rtcp-mux=require is set, which leads to the correct behaviour. This
is needed because the RTCP fallback port might already be closed, so
trying to include it in the offer would require opening a new set of
ports, which is undesirable.
closes#1494
Change-Id: I550bec08379c799cb7dd090a70d090ae47462467
Keep a running lifetime total of all "gauge" type metrics. Also track
the square of the sums of all "gauge" type metrics in order to determine
the standard deviation.
Change-Id: I23f60774a6421636f1a913674c7d1b54a1c5f702
When doing the initial answer, the packet_stream endpoint port isn't
filled in yet. Use the stream_params port instead to test for rejected
streams.
closes#1499
Change-Id: I8f315d95521f874fb8c5e6222263d017800b5fc9
When ports are closed early (while the call is still running), we must
first update a slave rtpengine with this new information (that these
ports are now closed) before actually releasing the ports ourselves. Not
doing so leads to a race condition where the master instance re-uses a
port that was just closed before the slave instance knows about the port
being closed.
We implement this using a thread-local list to keep track of ports that
were released while processing a control message, and process this list
to actually close the ports only after Redis has been updated.
Additional calls to the function to close the ports are placed in
strategic locations to make sure this is triggered in every code path.
closes#1495
Change-Id: I803f4594f30ca315da0b84c6e76893f54ca3a7c9
This eliminates a spurious false warning log message for rejected
streams that use a dummy payload type
Change-Id: Id628cafb8d7c4ea576cd01ff35f5dd9cd2151280
Since we're creating a dummy sfd to hold the SRTCP context when we don't
have an actual RTCP port, we must make sure to remember and re-use this
dummy sfd during a re-invite. Otherwise we end up creating a duplicate
dummy sfd, which is detected as a different sfd and thus triggers an ICE
restart.
Change-Id: Iadc91e163bd15a3cd5f57656b52941724c920143
There's no need to open ports on non-primary interfaces if ICE is not in
use as these ports will not be used or seen by anyone.
This mostly obsoletes the `save-interface-ports` config option, with the
exception of ICE advertised by the offerer. We currently have no option
to reject ICE from the offerer during the offer phase, so ports would
always be opened on that side.
Relevant to #1164 and 001abe5
Change-Id: I43df70bc0ec49b81f63aec97c776e48617b2acfd
This enables the same behaviour towards the offerer when rtcp-mux=demux
or =accept is used, as we have towards the answerer when
rtcp-mux=require is used.
Change-Id: I56a1cea84efce0c2db1b58c500629d0e54d582f4
Special handling for codec lists that were received as part of an
answer: If the list includes a codec that was not offered, ignore that
codec. This prevents transcoders from being set up that were not
requested.
This brought to light some tests that were actually broken.
Change-Id: Iac71056ec5e10b5de5567917974f2c4e0261eb0c
If DTLS is rejected in an answer via `DTLS=off` we must forget that DTLS
was previously offered, as otherwise a re-invite would detect the
fingerprint as changed if the re-invite doesn't offer DTLS again. We
also make sure DTLS is shut down if during stream init DTLS is not
given, when it was present before.
Change-Id: I48ee6f0ec5ec02f558a6799951552ea2272d0e96
This is useful for functions which are used both from a timer and from
other callers. These functions would reset the logging context at their
end to free the reference held by the logging context, which would
wrongly reset the logging context when the same function was called from
a different code path. Using a stack with push/pop semantics makes it
safe to use these functions from any code path.
Additionally introduce an explicit reset function that clears the entire
stack regardless of context. This reset function is called at the end of
every work iteration in every worker thread, just in case not everything
was popped from the stack.
Change-Id: I0e2c142b95806b26473c65a882737e39d161d24d
commit a2e5cfb8e5
Author: Razvan Crainea <razvan@opensips.org>
Date: Thu Jan 13 16:16:19 2022 +0200
Add tests for subscribe requests on paused media
commit fa58596a9f
Author: Razvan Crainea <razvan@opensips.org>
Date: Wed Jan 12 22:01:27 2022 +0200
Swap media direction check for `subscribe request`
as @rfuchs mentioned in his review, the SEND/RECV media flags are set
according to rtpengine's perspective, not the media flow's one.
commit e1e9a157c0
Author: Razvan Crainea <razvan@opensips.org>
Date: Wed Jan 12 19:27:42 2022 +0200
Fix `subscribe request` SDP media direction
When building the SDP for a `subscribe request` command, take into
consideration the media direction of the source stream - if stream is
`recvonly`, then we do not have anything to send, thus the direction
should be advertised as `inactive`, rather than `sendonly`.
Change-Id: I2d78bbec8ad584774f3c90f0ce5cca42f57f7b0f
With multiple media subscriptions, codec handlers are called
consecutively, once for each forwarding chain, leading to DTMF events
reported multiple times. The DTMF trigger must therefore keep track of
the state in the upper media object, not in the codec handlers.
Change-Id: I9ceaf406e093f25b7c037a325a0f2a7a91954922
This makes it possible to add new streams without specifying the
direction/interface again.
Reported in #1366
Change-Id: I8f320ecbe72f123d755ba80370de9c40960eb0f0
While doing the A/B reassociation during an offer/answer exchange, we
don't (necessarily) want to remove all existing subscriptions. Instead
we cant to unsubscribe all subscribers so we don't do media forking, but
leaving existing subscriptions alone to make early media reception
possible. This mirros the old behaviour.
Change-Id: Ib9e6671ca2d23d1eb4509d7cf939015c816cc622
Also add a safeguard against filling the remote peer address with an
address from the wrong family
closes#1305
Change-Id: Iac18212b4d526a2f7d49a06ddcd724aa89b06060
The contents of the ->next element cannot be accessed completely lock
free as they're zeroed out during call removal. Instead grab a reference
to the linked next call before releasing the lock, and also lock the
next element before moving on. This requires a more granular locking as
not to interfere with call removal: One lock to protect the contained
call and the ->next, and another to protect the ->prev
Change-Id: I5474ea3f88e3276f93ba62a952b3be13c0c182e9
commit b0c722da69ad088a2eddced12b37c0546a514890
Author: Daniel Hauptmann <dhauptmann@sipwise.com>
Date: Mon Jul 26 15:35:51 2021 +0200
changed flag bit length
in call_interfaces.h changed bit length of reuse_codec from 0 to 1
commit 0313a747532d5987f25fa9edb202aa460bf98dd1
Author: Daniel Hauptmann <dhauptmann@sipwise.com>
Date: Mon Jul 26 15:29:20 2021 +0200
inversed reuse_codec logic
in test-transcode.c and call.c, reuse_codec = 0 (default) will now result in using codec_store_populate instead of codec_store_populate_reuse
commit b876bd686bd30df21a5962aca16fc1c85574f554
Author: Daniel Hauptmann <dhauptmann@sipwise.com>
Date: Mon Jul 26 15:18:19 2021 +0200
adding option to minimalize changes in the codec_store_population
added function codec_store_populate_reuse in codec.c which replaces codec_store_populate but makes fewer changes to the GLists with the old and new codecs
added flag to enable this feature (disabled by default)
commit 6fd0b701c9589b2fae00300801e02a9b5cc397ab
Author: Daniel Hauptmann <dhauptmann@sipwise.com>
Date: Mon Jul 26 14:44:42 2021 +0200
Added Option to minimize change in the codecs
In codec.c added function to populate codec store with the fewest changes between the old and new GList which contains the codecs.
Added new testroutine in test-transcode.c line 1500
Added flag to call_interfaces.h to optionally enable this feature
Change-Id: If58d9a07d114b05dfb75553a87eb4372ae949fbb
commit 3bf554a8fbae7e948343699f40d935693618b764
Author: Daniel Hauptmann <dhauptmann@sipwise.com>
Date: Fri Jul 23 13:58:02 2021 +0200
changing codec-exchange behaviour
in codec.c line 3288 function codec_store_populate now doesnt empty dst and copy new codec from src to it, instead codecs from src will be appended to dst and codec from dst, which are not
being contained by src are being removed
Change-Id: Id6b7ee65595f9cc5c71ef557c7bac5ee38f97cbe
Complete overhaul of the codec handling code:
*) obsolete flags `asymmetric codecs`, `symmetric codecs`, `reorder
codecs`
*) support proper codec offer/answer
*) split codec manipulation (strip/offer/accept/etc) into separate
functions for clarity and better code maintenance
*) fully update codec handlers in both directions after an answer
*) explicit allocation and handling of codecs and payload types in a
codec_store object
*) improve codec matchup logic during answer
*) more explicit handling of supplemental codecs (CN/DTMF)
*) remove now obsolete hacks for handling certain use cases
Change-Id: I996705ba8fe339524c2f70e6bb0fd854f9a1f4fb
This solves problems when the same SSRC is looped through the same call
multiple times in different mono/dialogues, with different parameters.
Change-Id: I1d033cb1f012574d82b5bcbfffe11eb5f983cfd8
The JSON context is already in an object, therefore skip the surrounding
{} enclosure.
Also don't run the global MQTT timer when MQTT is disabled.
closes#1290
Change-Id: I63c622bd339545e625ee18def33f21de2533f949
This makes the type in line with string(3) functions and eliminates some
compiler warnings.
Also update the related bencode data type.
Change-Id: I7ef4024f4b5a0f737b3dbe03bcd078032395bce6
If we receive an SDP with a DTLS fingerprint, by default we adopt the
hash function used for that fingerprint in subsequent communication with
that peer. However, if the SDP is an answer, and we previously used a
different hash function in the offer towards that peer, then a later
re-invite offer would be sent with a different fingerprint, causing an
unexpected DTLS restart. Instead, make sure we don't change fingerprints
if one was already sent.
Change-Id: I603bb86ce2d7121556c161749ed08128dd0b63b2
Avoid using an explicit test for the trickle ICE endpoint address and
instead use the TRICKLE_ICE flag.
Change-Id: I821ced7e77c798004c9d88ec072848b7f6e24a85
Richard Fuchs
Donat Zenichev
John Burke
Stefan Mititelu
Daniel Hauptmann
Guillem Jover
Julien Chavanton
Julien Chavanton
balajeesv