The `dtmf_send` event might not have a matching entry while handling a
received DTMF event. Move bookkeeping of the random output event into
`dtmf_recv`.
Change-Id: I5507b0b7f5eca6e29cbcaccc905ab25249b22aa3
Usually supplemental RTP types (DTMF) are listed after the primary audio
codecs. In the case of the order being reversed, fix `single-codec` so
that it doesn't strip the actual audio codec that is listed after the
DTMF type.
Change-Id: I1b03b89e31bebf4de303b643dcf08d2ffb90ebaf
In some cases it's possible that some packets still arrive in userspace
immediately after a stream has been pushed to the kernel, for example if
some packets are already in the queue or if there is some processing
delay (e.g. writing to Redis). Allow for a short delay before counting a
stream as userspace if it has been pushed to the kernel.
Change-Id: I55a6e255868c8c2a9e93355a4aa2287f07b3748d
Based on the information gotten from Richard Fuchs
document the main objects in the code, to let the code be more
understandable for other code readers.
Mainly documented:
- call
- call_monologue
- call_subscription
- call_media
- packet_stream
- stream_fd
- sink_handler
- rtpe_callhash / rtpe_callhash_lock
Change-Id: I0cf122bea2d9c3f198b48da134a70301564ff1f9
On bookworm and later, libasan reports a false positive in combination
with pthread_cleanup_push() (see [1]). Work around this by not using the
thread cleanup handler when running the asan build, and instead use a
shorter thread sleep time.
[1] https://gcc.gnu.org/bugzilla//show_bug.cgi?id=82109
Change-Id: Ieffdc0b13f470445f1f8e1d2448c6af6d8dd68e0
Only skip forwarding unknown payload types in the kernel module if
there's reason to skip them, i.e. when we know that certain payload
types must be handled in userspace. Use an explicit flag to signal this
to the kernel module instead of implicitly doing it for anything that is
RTP.
Change-Id: I655317afe64a27252bf7b8be6c78418db2e1ccef
Legacy UDP/TCP control protocols don't provide information about RTP
payload types, therefore don't pretend that we know that this is RTP.
Setting the RTP flag without knowing the payload types has the undesired
side effect that unknown payload types (all of them) would not be
handled by the kernel module.
Change-Id: I5882f777a5912b912ec7c870f21c77aac8127600
Instead of just leaving the transport protocol unset when we know we're
not supposed to be aware of the protocol, add a special entry to
suppress the pointless warning message.
Change-Id: I228c2f1652320627f974d9d7bcb0b1345adce2be
Similar to I7fd298669a4fd69e62edc4760ffd92eff074707b but for
codec-accept. This prefers accepting codecs that match the given
definiton exactly, but also accepts compatible codecs if no exact match
is found.
Change-Id: I52a2ab6e75f7334a85a8ef059a0d6703a07e4b7f
Legacy protocols don't set sp->num_ports. Use a sensible default for
this case.
Probably a regression from 2d2d7665b
Change-Id: Idcbc477a68b6db70a91a5d082736ac642c50ab15
When adding codecs to the SDP for potential transcoding, use more
sophisticated logic to determine whether the desired codec is already
present. Previously only the raw RTP payload string was used, which
doesn't take codec-specific format options into account. The new
matching function will now also match against existing codecs with
slightly different but compatible a=fmtp options, but will not match
against those with incompatible options.
Change-Id: I7fd298669a4fd69e62edc4760ffd92eff074707b
Convenience function to get a list of all codecs that match a given
definition, including a possible exact match.
Change-Id: I2b7d49fb320ad1725b348f7d29be450e5fea925b
Make these functions return the newly created payload type object so
that it can be manipulated directly without having to do a lookup.
Change-Id: Ib035cf7d61c61d0de6d5f87dfd497d17ba28ca5f
Parse out the format parameters for a payload type object when the codec
definition is loaded. Parsing it out is done only once, and if done
early the parsed contents can be used for format checking, comparing,
matching, etc.
Change-Id: I2856e5a8d4d76e7e1e648eff4a91fc51d0ba20c2
Split up this function into two parts so that they can be used
individually. Eliminate the special 0x1 return value as this isn't used
anywhere else. Move the error reporting into
codec_make_payload_type_sup() where it belongs.
Change-Id: Id2060272d87596a3db32d8776930a98b0f226b3b
Introduce an additional function for codec matching. Different functions
match different parts of an RTP payload type object and the referenced
codecs.
Change-Id: I2e488eaa7f69a55322db748fd40c8d1195e38605
We have no use for -1/0/1 return values. Change the return type to bool
to make things more clear.
Change-Id: Iedf1d8278c6dfddddb328ce7b3b1dbae132a39b7
Parsing out the a=fmtp string has been left up to the codec init
function until now, with the values that resulted from the parsing being
stored only within the codec. Convert this to an explicit method to
parse the a=fmtp string, and introduce a dedicated struct to store the
resulting values.
Functionally this change is a no-op.
Change-Id: Ia84e26d632ed5209b4439fd82c1e4e38850fd024
commit 025f56212d
Author: Andreas Granig <andreas@granig.com>
Date: Tue Oct 4 14:23:01 2022 +0200
Document the mqtt-tls-alpn option
commit e6cc320d19
Author: Andreas Granig <andreas@granig.com>
Date: Mon Oct 3 21:41:14 2022 +0200
Add TLS ALPN option to be set when connecting MQTT
This is required to be set to "mqtt" for instance when connecting
to the AWS IoT Core data endpoint at port 443 to indicate we're
sending MQTT, because in that case websocket and mqtt shares the same
port for whatever reason.
Change-Id: I6a391e815411b178187ef42aa009e45853d1c388
The packet must be decrypted first before RTP padding can be considered,
as the padding count is part of the encrypted payload as well.
Change-Id: I6aecff636efd420401856bb8110b3d784f989179
This distinguishes `to-label` from `set-label` for media blocking
methods, when previously they were synonymous.
Upgrade sink determination to list at the same time.
Change-Id: I5b35c78f2f307867b51b5376d5a6afbd79128d99
This makes it possible to have different media silencing options for
different outputs. Functionally this commit alone is a no-op.
Change-Id: I967c3e07ea4645bb49ccb76db12d51ded2d72f06
Make kernelize_one eturn the list of sorted payload types back to the
calling function instead of only keeping it temporarily. This makes it
possible to re-use the list in repeated invocations of the same
function.
Change-Id: I696b4d033715bb60c80c8b932b80d558f364a5c5
Don't keep the flag for "no kernel support" set indefinitely as
conditions might change, re-enabling kernel support at a later time.
Change-Id: Id8f456b653f1ea3d6a9db1ff3a0800d3cca8fcc5
Create a dedicated struct to hold certain attributes shared by both sink
handlers and media subscriptions, as a preparation to simplify handling
these attributs.
Change-Id: I866159c33ed6d6a2873d2cf68c4906ea705d253e
This makes it possible to refactor and simplify the interface functions,
as pointers and offsets can't be utilised with bit fields.
Change-Id: I70f1ac0eca7d2ccf8e8d5f5794580163f3f5b7ad
If an offer is going to a side that is already known to support
rtcp-mux, don't try to offer a fallback RTCP port. Do this by pretending
that rtcp-mux=require is set, which leads to the correct behaviour. This
is needed because the RTCP fallback port might already be closed, so
trying to include it in the offer would require opening a new set of
ports, which is undesirable.
closes#1494
Change-Id: I550bec08379c799cb7dd090a70d090ae47462467
Newer libwebsockets versions seem to use a longer internal timeout, so
an explicit "interrupt" is needed during shutdown to prevent a long wait
time.
Change-Id: I8f28ef658169178e35b40dd44520fbd7c812b590
Zero SSRC are technically invalid, but the code accepts them as valid
and therefore sets up things like crypto contexts for zero SSRCs.
Consequently it's possible to have a zero SSRC first in the list of
SSRCs and other valid SSRCs later in the list, which means we can't use
the presence of a non-zero SSRC first in the list as a flag to determine
whether SSRC tracking is in use or not. Use an explicit flag instead.
Change-Id: I88736e5d6b0f66c58f8d675137231760951e7610
Don't increase the index pointer before using it. This fixes slots 1 and
2 being filled before slot 0, which ends up filling slots 0 and 2 first
(due to swapping with slot 0), leaving slot 1 empty.
Change-Id: If34cf561fcb153edde6408252c3286c8c80991bc
Keep a running lifetime total of all "gauge" type metrics. Also track
the square of the sums of all "gauge" type metrics in order to determine
the standard deviation.
Change-Id: I23f60774a6421636f1a913674c7d1b54a1c5f702
Starting with release 5.1, ffmpeg obsoletes the `channels` and
`channel_layout` fields, replacing them with a unified `ch_layout`
struct of type AVChannelLayout. Add wrapper defines into the
compile-time build-test headers fix_frame_channel_layout*.h to
accommodate both new and old versions.
Change-Id: I3d43b85dc3140155a61b1cf2269cda166ad88e9a
Keyspace notifications are set up before existing calls are restored
(restore_thread). Therefore the following scenario is possible:
NOTIF THREAD: receives SET, creates call
RESTORE THREAD: executes KEYS *
NOTIF THREAD: receives another SET:
NOTIF THREAD: does call_destroy(), which:
adds ports to late-release list
RESTORE THREAD: comes across call ID, does GET
RESTORE THREAD: creates new call
RESTORE THREAD: wants to allocate ports, but they're still in use
NOTIF THREAD: now does release_closed_sockets()
Use a multi-A multi-B lock to protect the two code sections from each
other and make sure that notification threads have always released all
ports before a restore thread attempts to allocate any.
Reported in #1503
Change-Id: I322062488e2ce3515c5a3e6609a5700830ac1fd4
To prevent a race condition that might miss updates about call info, set
up the Redis keyspace notifications first and then run loop to restore
calls from the existing data.
closes#1503
Change-Id: I6afa4c50fe0a34c602063fc2f45b2ee38133cf1e
Allow override the bitrate if one is already set, as opus_init()
initially sets a default bitrate, which is then overridden by codec-set.
Change-Id: Id0253d23a8f5de977e30d296872ea1df01fdbfbc
The PT tracker doesn't distinguish between audio/media types and
supplemental types, so in order not to break DTMF handling we must take
all combinations of primary (audio/media) types and supplemental types
as both input types and handler types into account.
Fix-up for 74075f6396
Fix-up for I57e1278e4fad157083d9526d4829f2940581687f
closes#1508
possibly also #1504
Change-Id: If7b242def2d35fbed14b11d204ea328b8bfe5d79
To safeguard against non-refcounted objects being left over in a log
info piece (e.g. a string on the stack), add this new function to pop
pieces from the stack until the desired one is removed. This is needed
in case of a unpaired log_info_* without a matching log_info_pop.
closes#1511
Change-Id: I689de14d034df779521dfdf59f923fdbf7fabc9b
To safeguard against leftover log info pieces, add additional resets
within loops that might run repeatedly.
Relevant to #1511
Change-Id: I875f1683b7dc8cee359469e8062c08c3c3e48a9d
The codec answer routine resets the codec storage and so also resets the
clock rate tracker for "touched" codecs. This leads to all codecs seen
as "not touched" in the answer routine, which in turn leads to
supplemental codecs present in the answer SDP that should not be there.
Use the "for transcoding" flag for previously present codecs to retain
the "touched" status across the codec answer routine.
Change-Id: Idc4624606f7f10d7983e22ddf856432b07421157
When doing the initial answer, the packet_stream endpoint port isn't
filled in yet. Use the stream_params port instead to test for rejected
streams.
closes#1499
Change-Id: I8f315d95521f874fb8c5e6222263d017800b5fc9
When ports are closed early (while the call is still running), we must
first update a slave rtpengine with this new information (that these
ports are now closed) before actually releasing the ports ourselves. Not
doing so leads to a race condition where the master instance re-uses a
port that was just closed before the slave instance knows about the port
being closed.
We implement this using a thread-local list to keep track of ports that
were released while processing a control message, and process this list
to actually close the ports only after Redis has been updated.
Additional calls to the function to close the ports are placed in
strategic locations to make sure this is triggered in every code path.
closes#1495
Change-Id: I803f4594f30ca315da0b84c6e76893f54ca3a7c9
This prevents empty mixed output files from being created when mixed
output is enabled in the config but recording isn't active for that
call.
Change-Id: I66ead89dc8a7ea80b81164b3e24d997b0df5f37e
DTX and delay buffers and their timers are shut down during the codec
negotiation phase, which also happens for the offer side while
processing an answer. If the codec negotiation routine determines that
the existing codec handlers can be kept intact, we must restart the DTX
and delay buffers that have previously been shut down.
Buffer objects are never freed during a shutdown, therefore we simply
need to restore the contained references to indicate that these buffers
are active again.
closes#1481
Change-Id: I57181ba1655fd781a7c543ee31aa67fd179ba89b
This eliminates a spurious false warning log message for rejected
streams that use a dummy payload type
Change-Id: Id628cafb8d7c4ea576cd01ff35f5dd9cd2151280
Since we're already doing the full parsing of the request flags, use the
same function to parse all required flags
Change-Id: I0880ccbbbc36eae7b172440ce51afc1c544583a1
Richard Fuchs
Donat Zenichev
Damir Nedžibović
Dup4
Andreas Granig
Stefan Mititelu
Michael Prokop
szcom