It contains a list of SIP codes that is matched with the response
code received in reply from the subscriber's contacts in case
of call failure. In case of match, the forking based on Q value
is stopped and the code is transparently signaled back to the
caller, whereas also an announcement can be played if configured
in the existing sound set. Response codes 600, 603, 604, 606 are
implicitly included in the list.
Change-Id: Iec6ccad25aa59130ecd5c9add2e83c1341ff49eb
The preference specifies how many seconds each single contact
should ring before the calls goes to the next one. It is
considered only in case of forking based on Q value.
Change-Id: I0d0e93a3dae52934910248060616cc0d4833fa4a
The preference allows to enable the conversion of SIP INFO messages
containing application/dtmf-relay or application/dtmf payloads to
RFC DTMF events.
Added note that the feature is restricted to internal generated
INFO messages and it will not detect and convert exetrnal generated
INFO messages.
Change-Id: I02b5a72f3f5c1c5dfc1e5ed8a8746013ef9a1901
In particular add the following preferences:
* concurrent_max_in
* concurrent_max_in_per_account
* concurrent_max_in_total
Change-Id: I02bf2bc567acf52c832a2808b319b89c3d73fff4
* tables for intermediate cdrs are created as copies
from existing cdr tables
* the tables have similar names and prefixed with int_
* partitioning is removed in those tables
* int_cdr has a new column acc_ref that contains a reference
to the related acc 'INVITE' record,
and also used as a unique index
Change-Id: Ib9951d9d4618c4cfbb0991da3e8c803a7ccb61dd
* is_ccare flags a user as customer care one
and is used in ngcp-panel to restrict the role
only to Customer/Subsceriber related scopes
Change-Id: I72ff7d2d3ba6e56306e1a326f26475cee28e8100
* allowed_ips_header preference provides with a SIP
header name to take the IP address from for
"allowed_clis" ipauth check
Change-Id: I23790881c35534a82993e9afd645a754fb5723c0
* provisioning.voip_peer_rules triggers use internally
a join by IP address to insert/update entries in
kamailio.lcr_rule_target. in cases where there are 2 hosts
per peering group with the same IP address, the triggers
fail because they select duplicate peer hosts. to address
that the "lcr_rule_target join" in the relevant triggers
is adjusted to join the hosts tables by gw_name isntead,
since gw_name is guaranteed unique per peer group
(controlled by a unique key)
Change-Id: I36669efc22bb62ad34c57aac4d978435dbb26f0c
* this table is supposed to group cdrs
by a common identifier. for now it is call_id
it does not contain a dictionary like other
cdr_* relation tables because the field must be
of the similar type as well as to make it possible
to have multi field groups in the future.
Change-Id: Ie304c00bb5f061c80402de7a1072c206b11619ab
Must be 0 for string-key/string-val instead of 1 for
string-key/int-val, otherwise kamailio complains about
invalid int parameter in lua script.
Change-Id: I3421f3706efab9703fb046e0c6981785bb4bc696
We're querying for the alias during registration phase to check if the
dev-id passed by the device is a native alias or a devid alias.
Change-Id: I183cde2690e50bf233f388d79783ce1e5e868aa9
In v_time_sets_ical LEFT join is used insted of INNER join
Use varchar for the bysetpos for set input
Add duration and wkst fields to voip_timeset_periods
Add dtend into vcalendar header if presented
Add name into vcalendar
Change-Id: I077361c01adf034177f09401db9d7d2c4f838be3
A new "Add" mode allows to merge registered contacts of two different
subscribers, instead of replacing the actual ones with an external
one.
Change-Id: I0405ad90d58654bb14b39061b60407186ba6cff4
This flag indicates whether an alias is meant to be a device id, so
calls to this alias can be filtered to only allow calls to devices
carrying this device id in their display-name.
Change-Id: I29c0e2a34d2bd9c1a15618bcfcefe15b77787097
* ngcp.date_range_helper was created as replicated
but it was not replicated on PRO.
this up script recreates the table syncing it in the pair
Change-Id: I4259436701a686729cbbb4a8248feabfcf8054d3
- currenty, there is only cdr.export_status and cdr.exported_at columns
to mark rows already written.
- to handle the AMA ticket export (and other exporters in the future), a
table "accounting.cdr_export_status" is introduced, defineing "streams".
for now there will be "defualt" (the good old cdr-exporter) and
"ama-simples" (for UPC AT)
- the table accounting.cdr_export_status_data stores individual vlaus
for "export_status" (unexported, ok, failed) and exported_at timestamp
per cdr and per cdr exort stream
- all cdr relation table triggers for emulating fk are refactored to be fast.
Change-Id: I52c3383f82ef841e7b18515dd7b73db42a43e2f9
Added the following preferences:
* play_announce_before_call_setup
* play_announce_before_recording
Added the following sounds:
* announce_before_call_setup
* announce_before_recording
Change-Id: I433b09875dc09202390770c78e47cb2db9360fa4
to prevent a pontential foreign key error in susequent
alter table billing_fees_raw
..,
add unique key bfr_srcdestdir_idx (billing_profile_id, type,
match_mode, direction, source, destination),
..;
the key is turned into not-unique afterwards with 15449.up
Change-Id: I884adc442e48202fd0061fece400f5fcb6f892b5
* addresses an issue with the foreign key cannot be
recreated as it relies on the lnp_providers table,
affected since MariaDB 10.1.37
Change-Id: I785fcae727e975839c710f327bd10a659384c39c
the proc now locks contract_id=1 to synchronize when
creating new contracts. (LOCK TABLE is n/a in procs)
note this would be also needed for update operations.
for the lock to work, it requires a proper isolation level.
Change-Id: Ie553532d2879905858a02d0bff22b94d74b44850
A typo in 15400_not_replicated.up script cause the initial select
to return a NULL id, introducing some wrong lines in voip_preferences_enum
table.
The new up script delete the previously introduced wrong lines and
insert the correct ones.
Change-Id: I4e321978e932f866eeaec2b57cdc3deb3a3a0f35
+ add "match_mode" column
+ refactor indexes, triggers, copy proc
+ get_billing_fee_id proc implementing the 4 match modes:
- regex_longest_pattern
- regex_longest_match
- prefix
- exact_destination
+ get_billing_fee proc returning intervals/rates as a
packed string for matching call-out fees and on/offpeak
for the given time. to be used in kamailio/AoC
Change-Id: I7799c5a1ab33bb433c231bd4049c977bcb19b684
* when peer group is changed for a peer rule
it is now correctly reflected in
kamailio.lcr_rule and kamailio.lcr_rule_target
Change-Id: I0a449a224874bd098a3d3c973958f812dbf78530
Allows to identify firmwares by a given tag, if the firmware consists
of multiple files and the phone fetches them by hardcoded names.
Change-Id: I5325895da642d306c92ab1e03264ba128cc295a6
to optimize the heavyweight fraud events query (and similar
places), the billing.billing_mappings is refactored into 2
new tables that will hold a scan-line rendered representation
of the former billing_mapping records known with their
(nullable) start and (nullable) stop cols.
accessing this new tables (eg. insert a billing mapping to
switch a contract's billing_profile, or query for the
contracts current billing profile) is not supposed to be
done explicitly, but by the stored sql proc provided:
- "billing.create_contract_billing_profile_network_from_package":
set/add a bunch of profiles from a profile package at once.
- "billing.get_billing_profile_by_*":
get a contract's billing profile id at the given epoch.
+ by_contract_id: customer or system contract id
+ by_uuid: subscriber uuid
+ by_peer_host_id: peer server id
- "billing.get_billing_profile_by_*_network":
get a contract's billing profile id for the given IPv4 or IPv6
string at the given epoch.
+ by_contract_id: customer or system contract id
+ by_uuid: subscriber uuid
+ by_peer_host_id: peer server id
The enhanced fraud queries can finally make use of a view that
can be used to get the current billing profile id:
- "billing.v_actual_billing_profiles":
View showing all contracts' billing_profile_id at the
current time. In contrast to the procs, the view can
be used nicely in joins of stmts.
15418.up also cover copying+transforming the existing records
in billing.billing_mappings. the old table and records are left
for now but are subject to be dropped soon. if new contracts
were created during the upgrade (although discouraged), the
transformation of not yet transformed contracts can be done by
simply re-executing
call billing.transform_billing_mappings();
Change-Id: Ib5ddd620b2b08ed7db4b6448a44931d37ea5b06a
* type field is now varchar(255) to allow custom
dictionary data to be entered
* add new dictionary values:
(header related dvalues are prefixed with 'header='
to avoid possible collisions as such fields will be
dynamic)
- furnished_charging_info
- header=Divesion
- header=P-Asserted-Identity
Change-Id: I907ad7d074e8ecbdcbfb57ba06dcab3645d60cf6
Flaviu Mates
Marco Capetta
Andreas Granig
Rene Krenn
Kirill Solomko
Irina Peshinskaya
Richard Fuchs
Andrew Pogrebennyk
Roman Romanchenko
Gerhard Jungwirth
Jozef Kenyeres