asterisk

Commit Graph

Author	SHA1	Message	Date
Naveen Albert	ebe9b566d2	app_confbridge: Always set minimum video update interval. Currently, if multiple video-enabled ConfBridges are conferenced together, we immediately get into a scenario where an infinite sequence of video updates fills up the taskprocessor queue and causes memory consumption to climb unabated until Asterisk is killed. This is due to the core bridging mechanism that provides video updates (softmix_bridge_write_control in bridge_softmix.c) continously updating all the channels in the bridge with video updates. The logic to do so in the core is that the video updates should be provided if the video_update_discard property for the bridge is 0, or if enough time has elapsed since the last video update. Thus, we already have a safeguard built in to ensure the scenario described above does not happen. Currently, however, this safeguard is not being adequately ensured. In app_confbridge, the video_update_discard property defaults to 2000, which is a healthy value that should completely prevent this issue. However, this value is only set onto the bridge in the SFU video mode. This leaves video modes such as follow_talker completely vulnerable, since video_update_discard will actually be 0, since the default or set value was never applied. As a result, the core bridging mechanism will always try to provide video updates regardless of when the last one was sent. To prevent this issue from happening, we now always set the video_update_discard property on the bridge with the value from the bridge profile. The app_confbridge defaults will thus ensure that infinite video updates no longer happen in any video mode. ASTERISK-29907 #close Change-Id: I4accb2536ac62797950468e9930f12ef7dd486b2	4 years ago
Naveen Albert	a8395c9420	general: Fix various typos. ASTERISK-30089 #close Change-Id: I1f5db911fd05a3a211c522c13e990fa1d0e62275	4 years ago
Naveen Albert	f6f4e11d17	app_dial: Propagate outbound hook flashes. The Dial application currently stops hook flashes dead in their tracks from propagating through on outbound calls. This fixes that so they can go down the wire. ASTERISK-30115 #close Change-Id: Id4e78b29a049f35c5b1e7520eaa10d0eb5b7f97c	4 years ago
Naveen Albert	96e56b89e0	app_dial: Fix dial status regression. ASTERISK_28638 caused a regression by incorrectly aborting early and overwriting the status on certain calls. This was exhibited by certain technologies such as DAHDI, where DAHDI returns NULL for the request if a line is busy. This caused the BUSY condition to be incorrectly treated as CHANUNAVAIL because the DIALSTATUS was getting incorrectly overwritten and call handling was aborted early. This is fixed by instead checking if any valid peers have been specified, as opposed to checking the list size of successful requests. This is because the latter could be empty but this does not indicate any kind of problem. This restores the previous working behavior. ASTERISK-29989 #close Change-Id: I4d4b209b967816b1bc791534593ababa2b99bb88	4 years ago
Naveen Albert	b1359bdfcf	pbx: Add helper function to execute applications. Finding an application and executing it if found is a common task throughout Asterisk. This adds a helper function around pbx_exec to do this, to eliminate redundant code and make it easier for modules to substitute variables and execute applications by name. ASTERISK-30061 #close Change-Id: Ifee4d2825df7545fb515d763d393065675140c84	4 years ago
Naveen Albert	47a1d7b1a3	app_voicemail: Add option to prevent message deletion. Adds an option to VoiceMailMain that prevents the user from deleting messages during that application invocation. This can be useful for public or shared mailboxes, where some users should be able to listen to messages but not delete them. ASTERISK-30063 #close Change-Id: Icdfb8423ae8d1fce65a056b603eb84a672e80a26	4 years ago
Naveen Albert	4f3c774246	xmldocs: Improve examples. Use example tags instead of regular para tags where possible. ASTERISK-30090 Change-Id: Iada8bbfda08f30b118cedf2d040bbb21e4966ec5	4 years ago
Naveen Albert	58c40a911b	app_confbridge: Add function to retrieve channels. Adds the CONFBRIDGE_CHANNELS function which can be used to retrieve a comma-separated list of channels, filtered by a particular type of participant category. This output can then be used with functions like UNSHIFT, SHIFT, POP, etc. ASTERISK-30036 #close Change-Id: I1950aff932437476dc1abab6f47fb4ac90520b83	4 years ago
George Joseph	01dc630b8c	GCC12: Fixes for 16+ Most issues were in stringfields and had to do with comparing a pointer to an constant/interned string with NULL. Since the string was a constant, a pointer to it could never be NULL so the comparison was always "true". gcc now complains about that. There were also a few issues where determining if there was enough space for a memcpy or s(n)printf which were fixed by defining some of the involved variables as "volatile". There were also a few other miscellaneous fixes. ASTERISK-30044 Change-Id: Ia081ca1bcfb329df6487c4660aaf1944309eb570	4 years ago
Naveen Albert	e5dc9e0979	chan_dahdi: Document dial resource options. Documents the Dial syntax for DAHDI, namely the channel group, distinctive ring, answer confirmation, and digital call options that are specified in the resource itself. ASTERISK-24827 #close Change-Id: Ib95e78497fb00dc5cbfde1c93a69f034bfd08c30	4 years ago
Michael Cargile	7f3b4b07a4	apps/confbridge: Added hear_own_join_sound option to control who hears sound_join Added the hear_own_join_sound option to the confbridge user profile to control who hears the sound_join audio file. When set to 'yes' the user entering the conference and the participants already in the conference will hear the sound_join audio file. When set to 'no' the user entering the conference will not hear the sound_join audio file, but the participants already in the conference will hear the sound_join audio file. ASTERISK-29931 Added by Michael Cargile Change-Id: I856bd66dc0dfa057323860a6418c1371d249abd2	4 years ago
Naveen Albert	0018f31353	app_meetme: Don't erroneously set global variables. The admin_exec function in app_meetme is used by the SLA applications for internal bridging. However, in these cases, chan is NULL. Currently, this function will set some status variables that are intended for a channel, but since channel is NULL, this is erroneously creating meaningless global variables, which shouldn't be happening. This sets these variables only if chan is not NULL. ASTERISK-30002 #close Change-Id: I817df6c26f5bda131678e56791b0b61ba64fc6f7	4 years ago
Naveen Albert	7e18d42479	documentation: Adds versioning information. Adds version information for applications, functions, and manager events/actions. This is not completely exhaustive by any means but covers most new things added that have release versioning information in the issue tracker. ASTERISK-29940 #close Change-Id: I506401e93c799715dbbe97c0a8ba18af2bf5e131	4 years ago
Maximilian Fridrich	163abe6934	core_unreal & app_dial: Flip stream direction of second channel. When executing dial, the topology of the inbound channel is cloned and used for the outbound channel. This creates issues when an incoming stream is sendonly or recvonly as the stream state of the outbound channel will be the same as the stream state of the inbound channel. Now the stream state is flipped for the outgoing stream in dial_exec_full if the incoming stream topology is recvonly or sendonly. The same is the case for unreal (local) channels which create a second (;2) channel as a counterpart which clones the topology of the first channel. Now the stream state is flipped for the streams of the 2nd channel in ast_unreal_new_channels if the incoming stream topology is recvonly or sendonly. ASTERISK-29655 Reported by: Michael Auracher ASTERISK-29638 Reported by: Michael Auracher Change-Id: I294dc834ac9a5f048b101b691669959e9df630e1	4 years ago
Naveen Albert	5a19d3dfe0	app_mf, app_sf: Return -1 if channel hangs up. The ReceiveMF and ReceiveSF applications currently always return 0, even if a channel has hung up. The call will still end but generally applications are expected to return -1 if the channel has hung up. We now return -1 if a hangup occured to bring this behavior in line with this norm. This has no functional impact, but merely increases conformity with how these modules interact with the PBX core. ASTERISK-29951 #close Change-Id: I234d755050ab8ed58f197c6925b968ba26b14033	4 years ago
Naveen Albert	df9791676e	app_queue: Add music on hold option to Queue. Adds the m option to the Queue application, which allows a music on hold class to be specified at runtime which will override the class configured in queues.conf. This option functions like the m option to Dial. ASTERISK-29876 #close Change-Id: Ie25a48569cf8755c305c9438b1ed292c3adcf8d7	4 years ago
Naveen Albert	e409219097	app_meetme: Emit warning if conference not found. Currently, if a user tries to access a non-dynamic MeetMe conference and the conference is not found, the call simply silent hangs up. There is no indication to the user that anything went wrong at all. This changes the relevant debug message to a warning so that the user is notified of this invalidity. ASTERISK-29954 #close Change-Id: Iebcfae3755d00f2150d676ee211c57bc59530048	4 years ago
Naveen Albert	4abd75b1d4	app_mf: Add max digits option to ReceiveMF. Adds an option to the ReceiveMF application to allow specifying a maximum number of digits. Originally, this capability was not added to ReceiveMF as it was with ReceiveSF because typically a ST digit is used to denote that sending of digits is complete. However, there are certain signaling protocols which simply transmit a digit (such as Expanded In-Band Signaling) and for these, it's necessary to be able to read a certain number of digits, as opposed to until receiving a ST digit. This capability is added as an option, as opposed to as a parameter, to remain compatible with existing usage (and not shift the parameters). ASTERISK-29877 #close Change-Id: I4229167c9aa69b87402c3c2a9065bd8dfa973a0b (cherry picked from commit `0da713168d`)	4 years ago
Naveen Albert	8abe4784ac	app_dial: Document DIALSTATUS return values. Adds documentation for all of the possible return values for the DIALSTATUS variable in the Dial application. ASTERISK-25716 Change-Id: Id22593f1f1f7ea86e5734cee49516ec50848e8c0	4 years ago
Kfir Itzhak	3069e1c640	app_queue: Add QueueWithdrawCaller AMI action This adds a new AMI action called QueueWithdrawCaller. This AMI action makes it possible to withdraw a caller from a queue, in a safe and a generic manner. This can be useful for retrieving a specific call and dispatching it to a specific extension. It works by signaling the caller to exit the queue application whenever it can. Therefore, it is not guaranteed that the call will leave the queue. ASTERISK-29909 #close Change-Id: Ic15aa238e23b2884abdcaadff2fda7679e29b7ec	4 years ago
Naveen Albert	c4afe9e664	documentation: Add since tag to xmldocs DTD Adds the since tag to the documentation DTD so that individual applications, functions, etc. can now specify when they were added to Asterisk. This tag is added at the individual application, function, etc. level as opposed to at the module level because modules can expand over time as new functionality is added, and granularity only to the module level would generally not be useful. This enables the ability to more easily determine when new functionality was added to Asterisk, down to minor version as opposed to just by major version. This makes it easier for users to write more portable dialplan if desired to not use functionality that may not be widely available yet. ASTERISK-29896 #close Change-Id: Ibbb35c702d8038bdc3fd0a944fbfa69384cc15d5	4 years ago
Naveen Albert	76e3fb402f	app_voicemail: Emit warning if asking for nonexistent mailbox. Currently, if VoiceMailMain is called with a mailbox, if that mailbox doesn't exist, then the application silently falls back to prompting the user for the mailbox, as if no arguments were provided. However, if a specific mailbox is requested and it doesn't exist, then no warning at all is emitted. This fixes this behavior to now warn if a specifically requested mailbox could not be accessed, before falling back to prompting the user for the correct mailbox. ASTERISK-29920 #close Change-Id: Ib4093b88cd661a2cabc5d685777d4e2f0ebd20a4	4 years ago
Naveen Albert	312e8989dd	app_mp3: Document and warn about HTTPS incompatibility. mpg123 doesn't support HTTPS, but the MP3Player application doesn't document this or warn the user about this. HTTPS streams have become more common nowadays and users could reasonably try to play them without being aware they should use the HTTP stream instead. This adds documentation to note this limitation. It also throws a warning if users try to use the HTTPS stream to tell them to use the HTTP stream instead. ASTERISK-29900 #close Change-Id: Ie3b029be5258c5a701f71ed3b1a7a80d1e03b827	4 years ago
Alexei Gradinari	aaf507fa36	app_queue: load queues and members from Realtime when needed There are a lot of Queue AMI actions and Queue applications which do not load queue and queue members from Realtime. AMI actions QueuePause - if queue not in memory - response "Interface not found". QueueStatus/QueueSummary - if queue not in memory - empty response. Applications: PauseQueueMember - if queue not in memory Attempt to pause interface %s, not found UnpauseQueueMember - if queue not in memory Attempt to unpause interface xxxxx, not found This patch adds a new function load_realtime_queues which loads queue and queue members for desired queue or all queues and all members if param 'queuename' is NULL or empty. Calls the function load_realtime_queues when needed. Also this patch fixes leak of ast_config in function set_member_value. Also this patch fixes incorrect LOG_WARNING when pausing/unpausing already paused/unpaused member. The function ast_update_realtime returns 0 when no record modified. So 0 is not an error to warn about. ASTERISK-29873 #close ASTERISK-18416 #close ASTERISK-27597 #close Change-Id: I554ee0eebde93bd8f49df7f84b74acb21edcb99c	4 years ago
Mark Petersen	8c230ebb87	app_queue.c: Queue don't play "thank-you" when here is no hold time announcements if holdtime is (0 min, 0 sec) there is no hold time announcements we should then also not playing queue-thankyou ASTERISK-29831 Change-Id: Ic7e51dcde526b23f1cd8d24e1d1e2d81e10f9d2c	4 years ago
Sean Bright	6060b9ccb0	utils.c: Remove all usages of ast_gethostbyname() gethostbyname() and gethostbyname_r() are deprecated in favor of getaddrinfo() which we use in the ast_sockaddr family of functions. ASTERISK-29819 #close Change-Id: Ie277c0ef768d753b169c121ef570a71665692ab7	5 years ago
Mark Petersen	ac9607d03b	app_queue.c: Support for Nordic syntax in announcements adding support for playing the correct en/et for nordic languages by adding 'n' for neuter gender in the relevant ast_say_number ASTERISK-29827 Change-Id: I03ebc827d2f0dc95132ab2f42799893c70edc5b1	5 years ago
Naveen Albert	dc5d70f29b	app_mp3: Throw warning on nonexistent stream Currently, the MP3Player application doesn't emit a warning if attempting to play a stream which no longer exists. This can be a common scenario as many mp3 streams are valid at some point but can disappear at any time. Now a warning is thrown if attempting to play a nonexistent MP3 stream, instead of silently exiting. ASTERISK-29829 #close Change-Id: I53a0bf1ed1740166655eb66fe7675f6f808bf535	5 years ago
Naveen Albert	6eeb7ab7d0	documentation: Add missing AMI documentation Adds missing documentation for some channel, bridge, and queue events. ASTERISK-24427 ASTERISK-29515 Change-Id: I92b06b88c8cadc0155f95ebe3e870b3e795a8c64	5 years ago
Naveen Albert	2ed004846a	app_sf: Add full tech-agnostic SF support Adds tech-agnostic support for SF signaling by adding SF sender and receiver applications as well as Dial integration. ASTERISK-29802 #close Change-Id: I7ec50752e9a661af639425e5d1e339f17411bcad	5 years ago
Steve Davies	076d502694	app_queue: Fix hint updates, allow dup. hints A previous patch for ASTERISK_29578 caused a 'leak' of extension state information across queues, causing the state of the first member of unrelated queues to be updated in addition to the correct member. Which queues and members depended on the order of queues in the iterator. Additionally, it is possible to use the same 'hint:' on multiple queue members, so the update cannot break out of the update loop early when a match is found. ASTERISK-29806 #close Change-Id: If2c1d1cc2a752afd9286d79710fc818596e7a7ad	5 years ago
Mark Petersen	0dbf313a76	app_queue.c: added DIALEDPEERNUMBER on outgoing channel added that we set DIALEDPEERNUMBER on the outgoing channels so it is avalible in b(content^extension^line) this add the same behaviour as Dial ASTERISK-29795 Change-Id: Icbc589ea2066f0c401a892bf478f6b2fd44e62f6	5 years ago
Mark Petersen	ff0b048543	app_voicemail.c: Support for Danish syntax in VM added support for playing the correct plural sound file dependen on where you have 1 or multipe messages based on the existing SE/NO code ASTERISK-29797 Change-Id: I88aa814d02f3772bb80b474204b1ffb26fe438c2	5 years ago
Naveen Albert	85dc5214e3	app_sendtext: Add ReceiveText application Adds a ReceiveText application that can be used in conjunction with SendText. Currently, there is no way in Asterisk to receive text in the dialplan (or anywhere else, really). This allows for Asterisk to be the recipient of text instead of just the sender. ASTERISK-29759 #close Change-Id: Ica2c354a42bff69f323a0493d3a7cd0fb129d52d	5 years ago
Naveen Albert	9eba9f44d6	app_mf: Add full tech-agnostic MF support Adds tech-agnostic support for MF signaling by adding MF sender and receiver applications as well as Dial integration. ASTERISK-29496-mf #do-not-close Change-Id: I61962b359b8ec4cfd05df877ddf9f5b8f71927a4	5 years ago
Alexander Traud	ca64087486	progdocs: Fix Doxygen left-overs. Change-Id: I5b5cf9c9cbbe00ba8b379a8d162ac67445d39016	5 years ago
Mark Petersen	caa12fecb1	apps/app_dial.c: HANGUPCAUSE reason code for CANCEL is set to AST_CAUSE_NORMAL_CLEARING changed that when we recive a CANCEL that we set HANGUPCAUSE to AST_CAUSE_NORMAL_CLEARING ASTERISK-28053 Reported by: roadkill Change-Id: Ib653aec2282f55b59d87484391cc07c8e6612b89	5 years ago
Alexander Traud	3489f926e7	progdocs: Fix for Doxygen, the hidden parts. ASTERISK-29779 Change-Id: If338163488498f65fa7248b60e80299c0a928e4b	5 years ago
Naveen Albert	6296f645a2	documentation: Standardize examples Most examples in the XML documentation use the example tag to demonstrate examples, which gets parsed specially in the Wiki to make it easier to follow for users. This fixes a few modules to use the example tag instead of vanilla para tags to bring them in line with the standard syntax. ASTERISK-29777 #close Change-Id: I9acb6cc5faf1d220e73c6dd28592371d768d279b	5 years ago
Naveen Albert	14c2121243	app_voicemail: Refactor email generation functions Refactors generic functions used for email generation into utils.c so that they can be used by multiple modules, including app_voicemail and app_minivm, to avoid code duplication. ASTERISK-29715 #close Change-Id: I1de0ed3483623e9599711129edc817c45ad237ee	5 years ago
Alexander Traud	07e4c686cc	apps: Fix for Doxygen. ASTERISK-29740 Change-Id: Icb6fbcfea0a5f1c82caa5001902b6a786adbf307	5 years ago
Naveen Albert	a9e2d9b5f1	app_morsecode: Fix deadlock Fixes a deadlock in app_morsecode caused by locking the channel twice when reading variables from the channel. The duplicate lock is simply removed. ASTERISK-29744 #close Change-Id: I204000701f123361d7f85e0498fedc90243c75e4	5 years ago
Naveen Albert	ac2c984f22	app_read: Fix custom terminator functionality regression Currently, when the t option is specified with no arguments, the # character is still treated as a terminator, even though no character should be treated as a terminator. This is because a previous regression fix was modified to remove the use of NULL as a default altogether. However, NULL and an empty string actually refer to different arrangements and should be treated differently. NULL is the default terminator (#), while an empty string removes the terminator altogether. This is the behavior being used by the rest of the core. Additionally, since S_OR catches empty strings as well as NULL (not intended), this is changed to a ternary operator instead, which fixes the behavior. ASTERISK-29705 #close Change-Id: I9b6b72196dd04f5b1e0ab5aa1b0adf627725e086	5 years ago
Josh Soref	ebd56c8bf3	apps: Spelling fixes Correct typos of the following word families: simultaneously administrator directforward attachfmt dailplan automatically applicable nouns explicit outside sponsored attachment audio spied doesn't counting encoded implements recursively emailaddress arguments queuerules members priority output advanced silencethreshold brazilian debugging argument meadmin formatting integrated sneakiness ASTERISK-29714 Change-Id: Ie5ecaec91c00b26309da4e51cfc0991a5bb7d092	5 years ago
Naveen Albert	54b41fcfd2	app_voicemail: Fix phantom voicemail bug on rerecord If users are able to press # for options while leaving a message and then press 3 to rerecord the message, if the caller hangs up during the rerecord prompt but before Asterisk starts recording a message, then an "empty" voicemail gets processed whereby an email gets sent out notifying the user of a 0:00 duration message. The file doesn't actually exist, so playback will fail since there was no message to begin with. This adds a check after the streaming of the rerecord announcement to see if the caller has hung up. If so, we bail out early so that we can clean up properly. ASTERISK-29391 #close Change-Id: Id965d72759a2fd3b39afb76fec08aaebebe75c31	5 years ago
Rodrigo Ramírez Norambuena	b12e8b5924	app_queue: Add LoginTime field for member in a queue. Add a time_t logintime to storage a time when a member is added into a queue. Also, includes show this time (in seconds) using a 'queue show' command and the field LoginTime for response for AMI events. ASTERISK-18069 #close Change-Id: Ied6c3a300f78d78eebedeb3e16a1520fc3fff190	5 years ago
Shloime Rosenblum	a68ef6aafd	apps/app_playback.c: Add 'mix' option to app_playback I am adding a mix option that will play by filename and say.conf unlike say option that will only play with say.conf. It will look on the format of the name, if it is like say it play with say.conf if not it will play the file name. ASTERISK-29662 Change-Id: I815816916a308f0fa8f165140dc15772dcbd547a	5 years ago
Naveen Albert	7ee4136dcf	app_read: Fix null pointer crash If the terminator character is not explicitly specified and an indications tone is used for reading a digit, there is no null pointer check so Asterisk crashes. This prevents null usage from occuring. ASTERISK-29673 #close Change-Id: Ie941833e123c3dbfb88371b5de5edbbe065514ac	5 years ago
Naveen Albert	9a427d4f5f	app_queue: Fix hint updates for included contexts Previously, if custom hints were used with the hint: format in app_queue, when device state changes occured, app_queue would only do a literal string comparison of the context used for the hint in app_queue and the context of the hint which just changed state. This caused hints to not update and become stale if the context associated with the agent included the context which actually changes state, essentially completely breaking device state for any such agents defined in this manner. This fix adds an additional check to ensure that included contexts are also compared against the context which changed state, so that the behavior is correct no matter whether the context is specified to app_queue directly or indirectly. ASTERISK-29578 #close Change-Id: I8caf2f8da8157ef3d9ea71a8568c1eec95592b78	5 years ago
Naveen Albert	41ba9f5f31	logger: Add custom logging capabilities Adds the ability for users to log to custom log levels by providing custom log level names in logger.conf. Also adds a logger show levels CLI command. ASTERISK-29529 Change-Id: If082703cf81a436ae5a565c75225fa8c0554b702	5 years ago

1 2 3 4 5 ...

5172 Commits (16.28.0)