3603 Commits (fe88f2e5ca1aadfd77fb1e11122755d37fdbb49d)

Author	SHA1	Message	Date
Joshua Colp	fe88f2e5ca	Merge "Binaural synthesis (confbridge): Adds utils/conf_bridge_binaural_hrir_importer"	8 years ago
zuul	ab34e46b3a	Merge "stream: Rename creates/destroys to allocs/frees"	8 years ago
Joshua Colp	b1edbc4c83	Merge "res_pjsip_pubsub: Correctly implement persisted subscriptions"	8 years ago
George Joseph	f8f513d363	stream: Rename creates/destroys to allocs/frees ... To be consistent with sdp implementation. Change-Id: I714e300939b4188f58ca66ce9d1e84b287009500	8 years ago
George Joseph	ca7fa7bbd2	Merge "stream: Add stream topology to channel"	8 years ago
George Joseph	4bdf5d329f	res_pjsip_pubsub: Correctly implement persisted subscriptions ... This patch fixes 2 original issues and more that those 2 exposed. * When we send a NOTIFY, and the client either doesn't respond or responds with a non OK, pjproject only calls our pubsub_on_evsub_state callback, no others. Since pubsub_on_evsub_state (which does the sub_tree cleanup) does not expect to be called back without the other callbacks being called first, it just returns leaving the sub_tree orphaned. Now pubsub_on_evsub_state checks the event for PJSIP_EVENT_TSX_STATE which is what pjproject will set to tell us that it was the transaction that timed out or failed and not the subscription itself timing our or being terminated by the client. If is TSX_STATE, pubsub_on_evsub_state now does the proper cleanup regardless of the state of the subscription. * When a client renews a subscription, we don't update the persisted subscription with the new expires timestamp. This causes subscription_persistence_recreate to prune the subscription if/when asterisk restarts. Now, pubsub_on_rx_refresh calls subscription_persistence_update to apply the new expires timestamp. This exposed other issues however... * When creating a dialog from rdata (which sub_persistence_recreate does from the packet buffer) there must NOT be a tag on the To header (which there will be when a client refreshes a subscription). If there is one, pjsip_dlg_create_uas will fail. To address this, subscription_persistence_update now accepts a flag that indicates that the original packet buffer must not be updated. New subscribes don't set the flag and renews do. This makes sure that when the rdata is recreated on asterisk startup, it's done from the original subscribe packet which won't have the tag on To. * When creating a dialog from rdata, we were setting the dialog's remote (SUBSCRIBE) cseq to be the same as the local (NOTIFY) cseq. When the client tried to resubscribe after a restart with the correct cseq, we'd reject the request with an Invalid CSeq error. * The acts of creating a dialog and evsub by themselves when recreating a subscription does NOT restart pjproject's subscription timer. The result was that even if we did correctly recreate the subscription, we never removed it if the client happened to go away or send a non-OK response to a NOTIFY. However, there is no pjproject function exposed to just set the timer on an evsub that wasn't created by an incoming subscribe request. To address this, we create our own timer using ast_sip_schedule_task. This timer is used only for re-establishing subscriptions after a restart. An earlier approach was to add support for setting pjproject's timer (via a pjproject patch) and while that patch is still included here, we don't use that call at the moment. While addressing these issues, additional debugging was added and some existing messages made more useful. A few formatting changes were also made to 'pjsip show scheduled tasks' to make displaying the subscription timers a little more friendly. ASTERISK-26696 ASTERISK-26756 Change-Id: I8c605fc1e3923f466a74db087d5ab6f90abce68e	8 years ago
Dennis Guse	b58de2fab7	Binaural synthesis (confbridge): Adds utils/conf_bridge_binaural_hrir_importer ... Adds the import tool for converting a HRIR database to hrirs.h ASTERISK-26292 Change-Id: I51eb31b54c23ffd9b544bdc6a09d20c112c8a547	8 years ago
George Joseph	bf2f091bbb	stream: Add stream topology to channel ... Adds topology set and get to channel. ASTERISK-26790 Change-Id: Ic379ea82a9486fc79dbd8c4d95c29fa3b46424f4	8 years ago
zuul	09fcfb26fa	Merge "stream: Add media stream topology definition and API"	8 years ago
George Joseph	8b72ec312b	stream: Add media stream topology definition and API ... This change adds the media stream topology definition and API for accessing and using it. Some refactoring of the stream was also done. ASTERISK-26786 Change-Id: Ic930232d24d5ad66dcabc14e9b359e0ff8e7f568	8 years ago
zuul	f9f74f4b75	Merge "manager: Restore Originate failure behavior from Asterisk 11"	8 years ago
Sean Bright	0910773077	manager: Restore Originate failure behavior from Asterisk 11 ... In Asterisk 11, if the 'Originate' AMI command failed to connect the provided Channel while in extension mode, a 'failed' extension would be looked up and run. This was, I believe, unintentionally removed in 51b6c49. This patch restores that behavior. This also adds an enum for the various 'synchronous' modes in an attempt to make them meaningful. ASTERISK-26115 #close Reported by: Nasir Iqbal Change-Id: I8afbd06725e99610e02adb529137d4800c05345d	8 years ago
Joshua Colp	bab4885f1e	stream: Add media stream definition and API with unit tests. ... This change adds the media stream definition and API for accessing and using it. Unit tests have also been written which exercise aspects of the API. ASTERISK-26773 Change-Id: I3dbe54065b55aaa51f467e1a3bafd67fb48cac87	8 years ago
Richard Mudgett	97c308471d	res_agi: Prevent an AGI from eating frames it should not. (Re-do) ... A dialplan intercept routine is equivalent to an interrupt routine. As such, the routine must be done quickly and you do not have access to the media stream. These restrictions are necessary because the media stream is the responsibility of some other code and interfering with or delaying that processing is bad. A possible future dialplan processing architecture change may allow the interception routine to run in a different thread from the main thread handling the media and remove the execution time restriction. * Made res_agi.c:run_agi() running an AGI in an interception routine run in DeadAGI mode. No touchy channel frames. ASTERISK-25951 ASTERISK-26343 ASTERISK-26716 Change-Id: I638f147ca7a7f2590d7194a8ef4090eb191e4e43	8 years ago
Richard Mudgett	72e3fc5845	Frame deferral: Revert API refactoring. ... There are several issues with deferring frames that are caused by the refactoring. 1) The code deferring frames mishandles adding a deferred frame to the deferred queue. As a result the deferred queue can only be one frame long. 2) Deferrable frames can come directly from the channel driver as well as the read queue. These frames need to be added to the deferred queue. 3) Whoever is deferring frames is really only doing the __ast_read() to collect deferred frames and doesn't care about the returned frames except to detect a hangup event. When frame deferral is completed we must make the normal frame processing see the hangup as a frame anyway. As such, there is no need to have varying hangup frame deferral methods. We also need to be aware of the AST_SOFTHANGUP_ASYNCGOTO hangup that isn't real. That fake hangup is to cause the PBX thread to break out of loops to go execute a new dialplan location. 4) To properly deal with deferrable frames from the channel driver as pointed out by (2) above, means that it is possible to process a dialplan interception routine while frames are deferred because of the AST_CONTROL_READ_ACTION control frame. Deferring frames is not implemented as a re-entrant operation so you could have the unsupported case of two sections of code thinking they have control of the media stream. A worse problem is because of the bad implementation of the AMI PlayDTMF action. It can cause two threads to be deferring frames on the same channel at the same time. (ASTERISK_25940) * Rather than fix all these problems simply revert the API refactoring as there is going to be only autoservice and safe_sleep deferring frames anyway. ASTERISK-26343 ASTERISK-26716 #close Change-Id: I45069c779aa3a35b6c863f65245a6df2c7865496	8 years ago
George Joseph	6f645a6d4e	Merge "media: Add experimental support for RTCP feedback."	8 years ago
zuul	10631bb209	Merge "PJPROJECT logging: Fix detection of max supported log level."	8 years ago
George Joseph	0ad6d2b3cf	Merge "ari: Implement 'debug all' and request/response logging"	8 years ago
Richard Mudgett	36bdd7c1a0	Add notes about embedded ast_frame structs holding a format ref. ... mod_format.h: Note ast_filestream.fr holds a format ref. translate.h: Note ast_trans_pvt.f holds a format ref. Change-Id: I86bda354d725207b41e08920355d7c31b2d7f749	9 years ago
Richard Mudgett	6f3e8c8e01	PJPROJECT logging: Fix detection of max supported log level. ... The mechanism used for detecting the maximum log level compiled into the linked pjproject did not work. The API call simply stores the requested level into an integer and does no range checking. Asterisk was assuming that there was range checking and limited the new value to the allowable range. To get the actual maximum log level compiled into the linked pjproject we need to get and save off the initial set log level from pjproject. This is the maximum log level supported. * Get and save off the initial log level setting before altering it to the desired level on startup. This has to be done by a macro rather than calling a core function to avoid incorrectly linking pjproject. * Split the initial log level warning messages to warn if the linked pjproject cannot support the requested startup level and if it is too low to get the pjproject buildopts for "pjproject show buildopts". * Adjust the CLI "pjproject set log level" to check the saved max log level and to generate normal output messages instead of a warning message. ASTERISK-26743 #close Change-Id: I40aa76653e2a1dece66c3f8734594b4f0471cfb4	9 years ago
George Joseph	6691606723	ari: Implement 'debug all' and request/response logging ... The 'ari set debug' command has been enhanced to accept 'all' as an application name. This allows dumping of all apps even if an app hasn't registered yet. To accomplish this, a new global_debug global variable was added to res/stasis/app.c and new APIs were added to set and query the value. 'ari set debug' now displays requests and responses as well as events. This required refactoring the existing debug code. * The implementation for 'ari set debug' was moved from stasis/cli.{c,h} to ari/cli.{c,h}, and stasis/cli.{c,h} were deleted. * In order to print the body of incoming requests even if a request failed, the consumption of the body was moved from the ari stubs to ast_ari_callback in res_ari.c and the moustache templates were then regenerated. The body is now passed to ast_ari_invoke and then on to the handlers. This results in code savings since that template was inserted multiple times into all the stubs. An additional change was made to the ao2_str_container implementation to add partial key searching and a sort function. The existing cli code assumed it was already there when it wasn't so the tab completion was never working. Change-Id: Ief936f747ce47f1fb14035fbe61152cf766406bf (cherry picked from commit 1d890874f3)	9 years ago
Lorenzo Miniero	1061539b75	media: Add experimental support for RTCP feedback. ... This change adds experimental support for providing RTCP feedback information to codec modules so they can dynamically change themselves based on conditions. ASTERISK-26584 Change-Id: Ifd6aa77fb4a7ff546c6025900fc2baf332c31857	9 years ago
Kevin Harwell	283c16c6b6	abstract/fixed/adpative jitter buffer: disallow frame re-inserts ... It was possible for a frame to be re-inserted into a jitter buffer after it had been removed from it. A case when this happened was if a frame was read out of the jitterbuffer, passed to the translation core, and then multiple frames were returned from said translation core. Upon multiple frames being returned the first is passed on, but sebsequently "chained" frames are put back into the read queue. Thus it was possible for a frame to go back into the jitter buffer where this would cause problems. This patch adds a flag to frames that are inserted into the channel's read queue after translation. The abstract jitter buffer code then checks for this flag and ignores any frames marked as such. Change-Id: I276c44edc9dcff61e606242f71274265c7779587	9 years ago
Aaron An	e0e502d9d2	res_rtp_asterisk: Fix bug in function CHANNEL(rtcp, all_rtt) ... Function CHANNEL(rtcp,all_rtt) CHANNEL(rtcp,all_loss) CHANNEL(rtcp,all_jitter) always return 0.0 due to wrong define of macro "AST_RTP_SATA_SET" and "AST_RTP_STAT_STRCPY". It should compare "combined" with "stat" not "current_stat". ASTERISK-26710 #close Reported-by: Aaron An Tested-by: AaronAn Change-Id: Id4140fafbf92e2db689dac5b17d9caa009028a15	9 years ago
zuul	6962a13466	Merge "core/pbx: dialplan show - display filename/line#"	9 years ago
Jonathan R. Rose	d96e350256	core/pbx: dialplan show - display filename/line# ... Adds the ability for extensions to be registered to include filename and line number so that dialplan show output can show the filename and line number of a config file responsible for generating a given extension. This only affects config modules that are written to use the new extension registering functions. In this patch, that only includes pbx_config, so extensions registered in extensions.conf and any included extension will be shown in this manner. Extensions registered in this manner will show the filename and line number *instead* of the registrar. ASTERISK-26658 #close Reported by: Jonathan R. Rose Change-Id: Ieccc6abccdff34ed5c7da3511fd24972b8f2dd30	9 years ago
Richard Mudgett	44e72c9d44	MESSAGE: Flush Message/ast_msg_queue channel alert pipe. ... ASTERISK-25083 Change-Id: Id54baa57a8dbca84e29f28bcd2ffc0a5ac12d8b2	9 years ago
George Joseph	79b09b5f18	res_pjsip_registrar: AMI Add RegistrationInboundContactStatuses command ... The PJSIPShowRegistrationsInbound AMI command was just dumping out all AORs which was pretty useless and resource heavy since it had to get all endpoints, then all aors for each endpoint, then all contacts for each aor. PJSIPShowRegistrationInboundContactStatuses sends ContactStatusDetail events which meets the intended purpose of the other command and has significantly less overhead. Also, some additional fields that were added to Contact since the original creation of the ContactStatusDetail event have been added to the end of the event. For compatibility purposes, PJSIPShowRegistrationsInbound is left intact. ASTERISK-26644 #close Change-Id: I326f12c9ecb52bf37ba03f0748749de4da01490a	9 years ago
Joshua Colp	faf2194fab	Merge "app_originate: Add option to execute gosub prior to dial"	9 years ago
Joshua Colp	cd5d9d1d69	Merge "tcptls: Use new certificate upon sip reload"	9 years ago
Joshua Colp	197e408395	Merge "PJPROJECT logging: Made easier to get available logging levels."	9 years ago
Guido Falsi	75230f4c01	res_rtp: Fix regression when IPv6 is not available. ... The latest Release candidate fails to create RTP streams when IPv6 is not available. Due to the changes made in September the ast_sockaddr structure passed around to create these streams is always of AF_INET6 type, causing failure when used for IPv4. This patch adds a utility function to check for availability of IPv6 and applies such check at startup to determine how to create the ast_sockaddr structures. ASTERISK-26617 #close Change-Id: I627a4e91795e821111e1cda523f083a40d0e0c3e	9 years ago
Richard Mudgett	1dfa11b65c	PJPROJECT logging: Made easier to get available logging levels. ... Use of the new logging is as simple as issuing the new CLI command or setting the new pjproject.conf option. Other options that can affect the logging are how you have the pjproject log levels mapped to Asterisk log types in pjproject.conf and if you have configured Asterisk to log the DEBUG type messages. Altering the pjproject.conf level mapping shouldn't be necessary for most installations as the default mapping is sensible. Configuring Asterisk to log the DEBUG message type is standard practice for collecting debug information. * Added CLI "pjproject set log level" command to dynamically adjust the maximum pjproject log message level. * Added CLI "pjproject show log level" command to see the currently set maximum pjproject log message level. * Added pjproject.conf startup section "log_level" option to set the initial maximum pjproject log message level so all messages could be captured from initialization. * Set PJ_LOG_MAX_LEVEL to 6 to compile in all defined logging levels into bundled pjproject. Pjproject will use the currently set run time log level to determine if a log message is generated just like Asterisk verbose and debug logging levels. * In log_forwarder(), made always log enabled and mapped pjproject log messages. DEBUG mapped log messages are no longer gated by the current Asterisk debug logging level. * Removed RAII_VAR() from res_pjproject.c:get_log_level(). ASTERISK-26630 #close Change-Id: I6dca12979f482ffb0450aaf58db0fe0f6d2e5389	9 years ago
Alexei Gradinari	e5e887be53	chan_pjsip: fix switching sending codec when asymmetric_rtp_codec=no ... The sending codec is switched to the receiving codec and then is switched back to the best native codec on EVERY receiving RTP packets. This is because after call of ast_channel_set_rawwriteformat there is call of ast_set_write_format which calls set_format which sets rawwriteformat to the best native format. This patch adds a new function ast_set_write_format_path which set specific write path on channel and uses this function to switch the sending codec. ASTERISK-26603 #close Change-Id: I5b7d098f8b254ce8f45546e6c36e5d324737f71d	9 years ago
David Kerr	ddc951060a	app_originate: Add option to execute gosub prior to dial ... Issue/patch ASTERISK-26587 was inspired by issue ASTERISK-22992 that requested ability to add callerid into app_originate. Comments in that issue suggested that it was better solved by adding an option to gosub prior to originating the call. The attached patch implements this much like app_dial with two options one to gosub on the originating channel and one to gosub on the newly created channel and behaves just like app_dial. I have tested this patch by adding callerid info to the new channel and also SIPAddHeader (to e.g. add header to force auto answer) and confirmed it works. Have also tested both 'exten' and 'app' versions of app_originate. Opened by: dkerr Patch by: dkerr Change-Id: I36abc39b58567ffcab4a636ea196ef48be234c57	9 years ago
Joshua Colp	c9cc64b911	Merge "ast_format: Adds an identifier for interleaved audio formats to the ast_format"	9 years ago
Michael Kuron	635b0a0a55	tcptls: Use new certificate upon sip reload ... Previously, a TLS server socket would only be restarted upon sip reload if the bind address had changed. This commit adds checking for changes to TLS parameters like certificate, ciphers, etc. so they get picked up without requiring a reload of the entire chan_sip module. This does not affect open connections in any way, but new connections will use the new TLS parameters. The changes also apply to HTTP and Manager. ASTERISK-26604 #close Change-Id: I169e86cefc6dcd627c915134015a6a1ab1aadbe6	9 years ago
zuul	120a4999f0	Merge "Add support for building RADIUS with radcli"	9 years ago
Joshua Colp	98b3b500dc	Merge "manager: update minor version"	9 years ago
Joshua Colp	d3dba74017	Merge "Implement internal abstraction for iostreams"	9 years ago
Mark Michelson	d670ea6297	manager: update minor version ... Based on bridge video AMI event changes, bump the minor version of AMI. Change-Id: Idf84507354170400813cda780906c94c9f1b60b4	9 years ago
Joshua Colp	ed143a3b7c	Merge "res_pjsip_outbound_authenticator_digest.c: Fix memory pool leak."	9 years ago
George Joseph	97b2ba472d	Merge "channel: Fix issues in hangup scenarios caused by frame deferral"	9 years ago
George Joseph	ac0a1ee6da	Merge "Revert "Revert "Add API for channel frame deferral."""	9 years ago
zuul	d0474f6322	Merge "res/ari/resource_bridges: Add the ability to manipulate the video source"	9 years ago
Joshua Colp	1c26117dff	Merge "cli: Fix ast_el_read_char to work with libedit >= 3.1"	9 years ago
Richard Mudgett	0cd0e70c16	res_pjsip_outbound_authenticator_digest.c: Fix memory pool leak. ... Responding to authentication challenges leaks PJSIP memory pools. The leak was introduced with a pjproject 2.5.5 API change. https://trac.pjsip.org/repos/ticket/1929 changed the API usage of pjsip_auth_clt_init() to require the new API pjsip_auth_clt_deinit() to clean up cached authentication allocations that get allocated with pjsip_auth_clt_reinit_req(). ASTERISK-26516 #close Change-Id: I4473141b8c3961d0dc91c382beb3876b3efb45c8	9 years ago
Joshua Colp	6911f9891f	Merge "manager: Bump AMI version number."	9 years ago
Timo Teräs	070a51bf7c	Implement internal abstraction for iostreams ... fopencookie/funclose is a non-standard API and should not be used in portable software. Additionally, the way FILE's fd is used in non-blocking mode is undefined behaviour and cannot be relied on. This introduces internal abstraction for io streams, that allows implementing the desired virtualization of read/write operations with necessary timeout handling. ASTERISK-24515 #close ASTERISK-24517 #close Change-Id: Id916aef418b665ced6a7489aef74908b6e376e85	9 years ago
Joshua Colp	d3b61a98f4	manager: Bump AMI version number. ... During the development of Asterisk 14 the behavior of the Command AMI action was altered such that the result was returned on lines with a prefix of "Output: ". While this was documented in the UPGRADE.txt file it is also reasonable that this should bump the AMI version number. ASTERISK-26556 Change-Id: Idf1bf01608e53f7bfdf43ddb4d0683e53f74ee42	9 years ago