910 Commits (fe66639492baade20ada21fcb417a9280fe26cdf)

Author	SHA1	Message	Date
Mike Bradeen	0f61cc69ad	res_pjsip: Add user=phone on From and PAID for usereqphone=yes ... Adding user=phone to local-side uri's when user_eq_phone=yes is set for an endpoint. Previously this would only add the header to the To and R-URI. ASTERISK-30178 Change-Id: Id3bfb5d225d762e7d2668c023fe09e4541ae8600	3 years ago
sungtae kim	fc63688e3b	res_musiconhold: Add option to not play music on hold on unanswered channels ... This change adds an option, answeredonly, that will prevent music on hold on channels that are not answered. ASTERISK-30135 Change-Id: I1ab0defa43a29a26ae39f94c623596cf90fddc08	3 years ago
Philip Prindeville	6efce9e18e	res_crypto: Don't load non-regular files in keys directory ... ASTERISK-30046 Change-Id: Ie77e0648f8b0b1c2159fb24662d1989cfd4cc36d	3 years ago
Naveen Albert	063722a64b	lock.c: Add AMI event for deadlocks. ... Adds an AMI event to indicate that a deadlock has likely started, when Asterisk is compiled with DETECT_DEADLOCKS enabled. This can make it easier to perform automated deadlock detection and take appropriate action (such as doing a core dump). Unlike the deadlock warnings, the AMI event is emitted only once per deadlock. ASTERISK-30161 #close Change-Id: Ifc6ed3e390f8b4cff7f8077a50e4d7a5b54e42fb	3 years ago
Naveen Albert	4fbaf86a2b	app_confbridge: Add end_marked_any option. ... Adds the end_marked_any option, which can be used to kick a user from a conference if any marked user leaves. ASTERISK-30211 #close Change-Id: I9e8da7ccb892e522546c0f2b5476d172e022c2f5	3 years ago
George Joseph	bc6061bc5c	res_geolocation: Add two new options to GEOLOC_PROFILE ... Added an 'a' option to the GEOLOC_PROFILE function to allow variable lists like location_info_refinement to be appended to instead of replacing the entire list. Added an 'r' option to the GEOLOC_PROFILE function to resolve all variables before a read operation and after a Set operation. Added a few missing parameters to the ones allowed for writing with GEOLOC_PROFILE. Fixed a bug where calling GEOLOC_PROFILE to read a parameter might actually update the profile object. Cleaned up XML documentation a bit. ASTERISK-30190 Change-Id: I75f541db43345509a2e86225bfa4cf8e242e5b6c	3 years ago
George Joseph	b221f0f86a	res_geolocation: Allow location parameters on the profile object ... You can now specify the location object's format, location_info, method, location_source and confidence parameters directly on a profile object for simple scenarios where the location information isn't common with any other profiles. This is mutually exclusive with setting location_reference on the profile. Updated appdocsxml.dtd to allow xi:include in a configObject element. This makes it easier to link to complete configOptions in another object. This is used to add the above fields to the profile object without having to maintain the option descriptions in two places. ASTERISK-30185 Change-Id: Ifd5f05be0a76f0a6ad49fa28d17c394027677569	3 years ago
George Joseph	81ede203b6	res_geolocation: Add profile parameter suppress_empty_ca_elements ... Added profile parameter "suppress_empty_ca_elements" that will cause Civic Address elements that are empty to be suppressed from the outgoing PIDF-LO document. Fixed a possible SEGV if a sub-parameter value didn't have a value. ASTERISK-30177 Change-Id: I924ccc5aa2f45110a3155b22e53dfaf3ef2092dd	3 years ago
George Joseph	08907bf6d8	res_geolocation: Add built-in profiles ... The trigger to perform outgoing geolocation processing is the presence of a geoloc_outgoing_call_profile on an endpoint. This is intentional so as to not leak location information to destinations that shouldn't receive it. In a totally dynamic configuration scenario however, there may not be any profiles defined in geolocation.conf. This makes it impossible to do outgoing processing without defining a "dummy" profile in the config file. This commit adds 4 built-in profiles: "<prefer_config>" "<discard_config>" "<prefer_incoming>" "<discard_incoming>" The profiles are empty except for having their precedence set and can be set on an endpoint to allow processing without entries in geolocation.conf. "<discard_config>" is actually the best one to use in this situation. ASTERISK-30182 Change-Id: I1819ccfa404ce59802a3a07ad1cabed60fb9480a	3 years ago
Joshua C. Colp	cffaf12d19	pjsip: Add TLS transport reload support for certificate and key. ... This change adds support using the pjsip_tls_transport_restart function for reloading the TLS certificate and key, if the filenames remain unchanged. This is useful for Let's Encrypt and other situations. Note that no restart of the transport will occur if the certificate and key remain unchanged. ASTERISK-30186 Change-Id: I9bc95a6bf791830a9491ad9fa43c17d4010028d0	3 years ago
Naveen Albert	3a95cadc1f	features: Add transfer initiation options. ... Adds additional control options over the transfer feature functionality to give users more control in how the transfer feature sounds and works. First, the "transfer" sound that plays when a transfer is initiated can now be customized by the user in features.conf, just as with the other transfer sounds. Secondly, the user can now specify the transfer extension in advance by using the TRANSFER_EXTEN variable. If a valid extension is contained in this variable, the call will automatically be transferred to this destination. Otherwise, it will fall back to collecting the extension from the user as is always done now. ASTERISK-29899 #close Change-Id: Ibff309caa459a2b958706f2ed0ca393b1ef502e3	3 years ago
George Joseph	9f4db77bbe	res_geolocation: Address user issues, remove complexity, plug leaks ... * Added processing for the 'confidence' element. * Added documentation to some APIs. * removed a lot of complex code related to the very-off-nominal case of needing to process multiple location info sources. * Create a new 'ast_geoloc_eprofile_to_pidf' API that just takes one eprofile instead of a datastore of multiples. * Plugged a huge leak in XML processing that arose from insufficient documentation by the libxml/libxslt authors. * Refactored stylesheets to be more efficient. * Renamed 'profile_action' to 'profile_precedence' to better reflect it's purpose. * Added the config option for 'allow_routing_use' which sets the value of the 'Geolocation-Routing' header. * Removed the GeolocProfileCreate and GeolocProfileDelete dialplan apps. * Changed the GEOLOC_PROFILE dialplan function as follows: * Removed the 'profile' argument. * Automatically create a profile if it doesn't exist. * Delete a profile if 'inheritable' is set to no. * Fixed various bugs and leaks * Updated Asterisk WiKi documentation. ASTERISK-30167 Change-Id: If38c23f26228e96165be161c2f5e849cb8e16fa0	4 years ago
Naveen Albert	e1e3e172a0	db: Add AMI action to retrieve DB keys at prefix. ... Adds the DBGetTree action, which can be used to retrieve all of the DB keys beginning with a particular prefix, similar to the capability provided by the database show CLI command. ASTERISK-30136 #close Change-Id: I3be9425e53be71f24303fdd4d2923c14e84337e6	4 years ago
Asterisk Development Team	a818b05ca1	Update CHANGES and UPGRADE.txt for 20.0.0	4 years ago
Naveen Albert	8a21417095	chan_dahdi: Add POLARITY function. ... Adds a POLARITY function which can be used to retrieve the current polarity of an FXS channel as well as set the polarity of an FXS channel to idle or reverse at any point during a call. ASTERISK-30000 #close Change-Id: If6f50998f723e4484bf68e2473f5cedfeaf9b8f1	4 years ago
George Joseph	1fa568e76f	Geolocation: chan_pjsip Capability Preview ... This commit adds res_pjsip_geolocation which gives chan_pjsip the ability to use the core geolocation capabilities. This commit message is intentionally short because this isn't a simple capability. See the documentation at https://wiki.asterisk.org/wiki/display/AST/Geolocation for more information. THE CAPABILITIES IMPLEMENTED HERE MAY CHANGE BASED ON USER FEEDBACK! ASTERISK-30128 Change-Id: Ie2e2bcd87243c2cfabc43eb823d4427c7086f4d9	4 years ago
George Joseph	639d72e98c	Geolocation: Core Capability Preview ... This commit adds res_geolocation which creates the core capabilities to manipulate Geolocation information on SIP INVITEs. An upcoming commit will add res_pjsip_geolocation which will allow the capabilities to be used with the pjsip channel driver. This commit message is intentionally short because this isn't a simple capability. See the documentation at https://wiki.asterisk.org/wiki/display/AST/Geolocation for more information. THE CAPABILITIES IMPLEMENTED HERE MAY CHANGE BASED ON USER FEEDBACK! ASTERISK-30127 Change-Id: Ibfde963121b1ecf57fd98ee7060c4f0808416303	4 years ago
Naveen Albert	f5680a7568	res_cliexec: Add dialplan exec CLI command. ... Adds a CLI command similar to "dialplan eval function" except for applications: "dialplan exec application", useful for quickly testing certain application behavior directly from the CLI without writing any dialplan. ASTERISK-30062 #close Change-Id: I42e9fa9b60746c21450d40f99a026d48d2486dde	4 years ago
Jose Lopes	d52e2b0f1d	res_pjsip_header_funcs: Add functions PJSIP_RESPONSE_HEADER and PJSIP_RESPONSE_HEADERS ... These new functions allow retrieving information from headers on 200 OK INVITE response. ASTERISK-29999 Change-Id: I264a610a9333359297a0825feb29a1bb4f4ad144	4 years ago
Kevin Harwell	a3b2daf127	res_pjsip: allow TLS verification of wildcard cert-bearing servers ... Rightly the use of wildcards in certificates is disallowed in accordance with RFC5922. However, RFC2818 does make some allowances with regards to their use when using subject alt names with DNS name types. As such this patch creates a new setting for TLS transports called 'allow_wildcard_certs', which when it and 'verify_server' are both enabled allows DNS name types, as well as the common name that start with '*.' to match as a wildcard. For instance: *.example.com will match for: foo.example.com Partial matching is not allowed, e.g. f*.example.com, foo.*.com, etc... And the starting wildcard only matches for a single level. For instance: *.example.com will NOT match for: foo.bar.example.com The new setting is disabled by default. ASTERISK-30072 #close Change-Id: If0be3fdab2e09c2a66bb54824fca406ebaac3da4	4 years ago
Naveen Albert	cc8e098e1d	app_voicemail: Add option to prevent message deletion. ... Adds an option to VoiceMailMain that prevents the user from deleting messages during that application invocation. This can be useful for public or shared mailboxes, where some users should be able to listen to messages but not delete them. ASTERISK-30063 #close Change-Id: Icdfb8423ae8d1fce65a056b603eb84a672e80a26	4 years ago
Naveen Albert	ddc2cca659	res_parking: Add music on hold override option. ... An m option to Park and ParkAndAnnounce now allows specifying a music on hold class override. ASTERISK-30087 Change-Id: I03de8d97b100e451b2611b5a621d48750f5d6a9e	4 years ago
Shloime Rosenblum	7dcea19ce8	res_agi: Evaluate dialplan functions and variables in agi exec if enabled ... Agi commnad exec can now evaluate dialplan functions and variables if variable AGIEXECFULL is set to yes. this can be useful when executing Playback or Read from agi. ASTERISK-30058 #close Change-Id: I669991f540496e7bddd096fec82b52c083036832	4 years ago
Moritz Fain	4bf2473ac4	ari: expose channel driver's unique id to ARI channel resource ... This change exposes the channel driver's unique id (i.e. the Call-ID for chan_sip/chan_pjsip based channels) to ARI channel resources as `protocol_id`. ASTERISK-30027 Reported by: Moritz Fain Tested by: Moritz Fain Change-Id: I7cc6e7a9d29efe74bc27811d788dac20fe559b87	4 years ago
Naveen Albert	432a1d2d7e	app_confbridge: Add function to retrieve channels. ... Adds the CONFBRIDGE_CHANNELS function which can be used to retrieve a comma-separated list of channels, filtered by a particular type of participant category. This output can then be used with functions like UNSHIFT, SHIFT, POP, etc. ASTERISK-30036 #close Change-Id: I1950aff932437476dc1abab6f47fb4ac90520b83	4 years ago
Michael Cargile	a2679b0ee2	apps/confbridge: Added hear_own_join_sound option to control who hears sound_join ... Added the hear_own_join_sound option to the confbridge user profile to control who hears the sound_join audio file. When set to 'yes' the user entering the conference and the participants already in the conference will hear the sound_join audio file. When set to 'no' the user entering the conference will not hear the sound_join audio file, but the participants already in the conference will hear the sound_join audio file. ASTERISK-29931 Added by Michael Cargile Change-Id: I856bd66dc0dfa057323860a6418c1371d249abd2	4 years ago
Naveen Albert	19c841950b	chan_dahdi: Don't append cadences on dahdi restart. ... Currently, if any custom ring cadences are specified, they are appended to the array of cadences from wherever we left off last time. This works properly the first time, but on subsequent dahdi restarts, it means that the existing cadences are left alone and (most likely) the same cadences are then re-added afterwards. In short order, the cadence array gets maxed out and the user begins seeing warnings that the array is full and no more cadences may be added. This buggy behavior persists until Asterisk is completely restarted; however, if and when dahdi restart is run again, then the same problem is reintroduced. This fixes this behavior so that cadence parsing is more idempotent, that is so running dahdi restart multiple times starts adding cadences from the beginning, rather than from wherever the last cadence was added. As before, it is still not possible to revert to the default cadences by simply removing all cadences in this manner, nor is it possible to delete existing cadences. However, this does make it possible to update existing cadences, which was not possible before, and also ensures that the cadences remain unchanged if the config remains unchanged. ASTERISK-29990 #close Change-Id: Ie32ea3e8a243b766756b1afce684d4a31ee7421d	4 years ago
Naveen Albert	4585a9c3b8	asterisk.c: Warn of incompatibilities with remote console. ... Some command line options to Asterisk only apply when Asterisk is started and cannot be used with remote console mode. If a user tries to use any of these, they are currently simply silently ignored. This prints out a warning if incompatible options are used, informing users that an option used cannot be used with remote console mode. Additionally, some clarifications are added to the help text and man page. ASTERISK-22246 ASTERISK-26582 Change-Id: I980a5380ef2c19e8ea348596396d5382893c4337	4 years ago
Naveen Albert	306ce09df2	func_db: Add function to return cardinality at prefix ... Adds the DB_KEYCOUNT function, which can be used to retrieve the number of keys at a given prefix in AstDB. ASTERISK-29968 #close Change-Id: Ib2393b77b7e962dbaae6192f8576bc3f6ba92d09	4 years ago
Mark Petersen	a3abc868db	chan_sip.c Session timers get removed on UPDATE ... If Asterisk receives a SIP REFER with Session-Timers UAC maintain Session-Timers when sending UPDATE" ASTERISK-29843 Change-Id: I8e9a21c13bf757fa34d778f49ba3cf859b29ae5c	4 years ago
Naveen Albert	6ddb0ec939	func_evalexten: Extension evaluation function. ... This adds the EVAL_EXTEN function, which may be used to retrieve the variable-substituted data at any extension. ASTERISK-29486 Change-Id: Iad81019689674c9f4ac77d235f5d7234adbb1432	4 years ago
Naveen Albert	193b7a81fe	chan_pjsip: Add ability to send flash events. ... PJSIP currently is capable of receiving flash events and converting them to FLASH control frames, but it currently lacks support for doing the reverse: taking a FLASH control frame and converting it into a flash event in the SIP domain. This adds the ability for PJSIP to process flash control frames by converting them into the appropriate SIP INFO message, which can then be sent to the peer. This allows, for example, flash events to be sent between Asterisk systems using PJSIP. ASTERISK-29941 #close Change-Id: I1590221a4d238597f79672fa5825dd4a920c94dd	4 years ago
Naveen Albert	92d408f293	cli: Add command to evaluate dialplan functions. ... Adds the dialplan eval function commands to evaluate a dialplan function from the CLI. The return value and function result are printed out and can be used for testing or debugging. ASTERISK-29820 #close Change-Id: I833e97ea54c49336aca145330a2adeebfad05209	4 years ago
Mark Petersen	1cdaeb8161	chan_pjsip: add allow_sending_180_after_183 option ... added new global config option "allow_sending_180_after_183" that if enabled will preserve 180 after a 183 ASTERISK-29842 Change-Id: I8a53f8c35595b6d16d8e86e241b5f110d92f3d18	4 years ago
Joshua C. Colp	fdc1c750f3	res_pjsip: Always set async_operations to 1. ... The async_operations setting on a transport configures how many simultaneous incoming packets the transport can handle when multiple threads are polling and waiting on the transport. As we only use a single thread this was needlessly creating incoming packets when set to a non-default value, wasting memory. ASTERISK-30006 Change-Id: I1915973ef352862dc2852a6ba4cfce2ed536e68f	4 years ago
Joshua C. Colp	4aedaaadeb	func_odbc: Add SQL_ESC_BACKSLASHES dialplan function. ... Some databases depending on their configuration using backslashes for escaping. When combined with the use of ' this can result in a broken func_odbc query. This change adds a SQL_ESC_BACKSLASHES dialplan function which can be used to escape the backslashes. This is done as a dialplan function instead of being always done as some databases do not require this, and always doing it would result in incorrect data being put into the database. ASTERISK-29838 Change-Id: I152bf34899b96ddb09cca3e767254d8d78f0c83d	4 years ago
Naveen Albert	ede4e2099f	app_queue: Add music on hold option to Queue. ... Adds the m option to the Queue application, which allows a music on hold class to be specified at runtime which will override the class configured in queues.conf. This option functions like the m option to Dial. ASTERISK-29876 #close Change-Id: Ie25a48569cf8755c305c9438b1ed292c3adcf8d7	4 years ago
Kevin Harwell	30cefc97a6	deprecation cleanup: remove leftover files ... Several modules removal and deprecations occurred in 19.0.0 (initial 19 release), but associated UPGRADE files were not removed from staging for some reason in the master branch. This patch removes those files, and also removes a spurious leftover header, chan_phone.h (associated module removed in 19). Change-Id: Ib92142c846b45c882d6b2b6caca7225253c83add	4 years ago
Alexei Gradinari	edce853123	res_pjsip_pubsub: update RLS to reflect the changes to the lists ... This patch makes the Resource List Subscriptions (RLS) dynamic. The asterisk updates the current subscriptions to reflect the changes to the list on the subscriptions refresh. If list items are added, removed, updated or do not exist anymore, the asterisk regenerates the resource list. ASTERISK-29906 #close Change-Id: Icee8c00459a7aaa43c643d77ce6f16fb7ab037d3	4 years ago
Kfir Itzhak	2be01ba40b	app_queue: Add QueueWithdrawCaller AMI action ... This adds a new AMI action called QueueWithdrawCaller. This AMI action makes it possible to withdraw a caller from a queue, in a safe and a generic manner. This can be useful for retrieving a specific call and dispatching it to a specific extension. It works by signaling the caller to exit the queue application whenever it can. Therefore, it is not guaranteed that the call will leave the queue. ASTERISK-29909 #close Change-Id: Ic15aa238e23b2884abdcaadff2fda7679e29b7ec	4 years ago
Naveen Albert	27fb4fd5bc	func_channel: Add lastcontext and lastexten. ... Adds the lastcontext and lastexten channel fields to allow users to access previous dialplan execution locations. ASTERISK-29840 #close Change-Id: Ib455fe300cc8e9a127686896ee2d0bd11e900307	4 years ago
Naveen Albert	c35e205bef	documentation: Add since tag to xmldocs DTD ... Adds the since tag to the documentation DTD so that individual applications, functions, etc. can now specify when they were added to Asterisk. This tag is added at the individual application, function, etc. level as opposed to at the module level because modules can expand over time as new functionality is added, and granularity only to the module level would generally not be useful. This enables the ability to more easily determine when new functionality was added to Asterisk, down to minor version as opposed to just by major version. This makes it easier for users to write more portable dialplan if desired to not use functionality that may not be widely available yet. ASTERISK-29896 #close Change-Id: Ibbb35c702d8038bdc3fd0a944fbfa69384cc15d5	4 years ago
Alexei Gradinari	c12cb899de	res_pjsip_pubsub: provide a display name for RLS subscriptions ... Whereas BLFs allow to show a display name for each RLS entry, the asterisk provides only the extension now. This is not end user friendly. This commit adds a new resource_list option, resource_display_name, to indicate whether display name of resource or the resource name being provided for RLS entries. If this option is enabled, the Display Name will be provided. This option is disabled by default to remain the previous behavior. If the 'event' set to 'presence' or 'dialog' the non-empty HINT name will be set as the Display Name. The 'message-summary' is not supported yet. ASTERISK-29891 #close Change-Id: Ic5306bd5a7c73d03f5477fe235e9b0f41c69c681	4 years ago
Naveen Albert	0da713168d	app_mf: Add max digits option to ReceiveMF. ... Adds an option to the ReceiveMF application to allow specifying a maximum number of digits. Originally, this capability was not added to ReceiveMF as it was with ReceiveSF because typically a ST digit is used to denote that sending of digits is complete. However, there are certain signaling protocols which simply transmit a digit (such as Expanded In-Band Signaling) and for these, it's necessary to be able to read a certain number of digits, as opposed to until receiving a ST digit. This capability is added as an option, as opposed to as a parameter, to remain compatible with existing usage (and not shift the parameters). ASTERISK-29877 #close Change-Id: I4229167c9aa69b87402c3c2a9065bd8dfa973a0b	4 years ago
Naveen Albert	585c2d17bb	ami: Allow events to be globally disabled. ... The disabledevents setting has been added to the general section in manager.conf, which allows users to specify events that should be globally disabled and not sent to any AMI listeners. This allows for processing of these AMI events to end sooner and, for frequent AMI events such as Newexten which users may not have any need for, allows them to not be processed. Additionally, it also cleans up core debug as previously when debug was 3 or higher, the debug was constantly spammed by "Analyzing AMI event" messages along with a complete dump of the event contents (often for Newexten). ASTERISK-29853 #close Change-Id: Id42b9a3722a1f460d745cad1ebc47c537fd4f205	4 years ago
Alexei Gradinari	b41440a179	app_queue: load queues and members from Realtime when needed ... There are a lot of Queue AMI actions and Queue applications which do not load queue and queue members from Realtime. AMI actions QueuePause - if queue not in memory - response "Interface not found". QueueStatus/QueueSummary - if queue not in memory - empty response. Applications: PauseQueueMember - if queue not in memory Attempt to pause interface %s, not found UnpauseQueueMember - if queue not in memory Attempt to unpause interface xxxxx, not found This patch adds a new function load_realtime_queues which loads queue and queue members for desired queue or all queues and all members if param 'queuename' is NULL or empty. Calls the function load_realtime_queues when needed. Also this patch fixes leak of ast_config in function set_member_value. Also this patch fixes incorrect LOG_WARNING when pausing/unpausing already paused/unpaused member. The function ast_update_realtime returns 0 when no record modified. So 0 is not an error to warn about. ASTERISK-29873 #close ASTERISK-18416 #close ASTERISK-27597 #close Change-Id: I554ee0eebde93bd8f49df7f84b74acb21edcb99c	4 years ago
Sean Bright	134cbebc1f	manager.c: Generate valid XML if attribute names have leading digits. ... The XML Manager Event Interface (amxml) now generates attribute names that are compliant with the XML 1.1 specification. Previously, an attribute name that started with a digit would be rendered as-is, even though attribute names must not begin with a digit. We now prefix attribute names that start with a digit with an underscore ('_') to prevent XML validation failures. This is not backwards compatible but my assumption is that compliant XML parsers would already have been complaining about this. ASTERISK-29886 #close Change-Id: Icfaa56a131a082d803e9b7db5093806d455a0523	4 years ago
Mark Petersen	e505337065	chan_sip.c Fix pickup on channel that are in AST_STATE_DOWN ... resolve issue with pickup on device that uses "183" and not "180" ASTERISK-29832 Change-Id: I4c7d223870f8ce9a7354e0f73d4e4cb2e8b58841	4 years ago
Naveen Albert	386c5e495f	cdr: allow disabling CDR by default on new channels ... Adds a new option, defaultenabled, to the CDR core to control whether or not CDR is enabled on a newly created channel. This allows CDR to be disabled by default on new channels and require the user to explicitly enable CDR if desired. Existing behavior remains unchanged. ASTERISK-29808 #close Change-Id: Ibb78c11974bda229bbb7004b64761980e0b2c6d1	4 years ago
Mark Petersen	93d090147f	app_queue.c: Queue don't play "thank-you" when here is no hold time announcements ... if holdtime is (0 min, 0 sec) there is no hold time announcements we should then also not playing queue-thankyou ASTERISK-29831 Change-Id: Ic7e51dcde526b23f1cd8d24e1d1e2d81e10f9d2c	4 years ago