asterisk

Commit Graph

Author	SHA1	Message	Date
Joshua Colp	f0d018e249	res_pjsip: Add a log message when creating a UAC dialog to a target URI that is invalid. ASTERISK-24499 #close Reported by: Rusty Newton git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432118 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
George Joseph	8e806f9e12	ASTERISK-24811: Add ast_sorcery_apply_config() to res_pjsip_publish_asterisk. Matt Hoskins reported that res_pjsip_publish_asterisk wouldn't pull config from realtime. Turns out it was just missing a call ast_sorcery_apply_config(). res_pjsip_acl was missing it as well, so I added it. The other pjsip modules looked OK. ASTERISK-24811 #close Reported-by: Matt Hoskins Tested-by: George Joseph Tested-by: Matt Hoskins patches: res_pjsip_publish_asterisk.c.patch submitted by Matt Hoskins (license 6688) Review: https://reviewboard.asterisk.org/r/4433/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432033 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	2181c9443f	res_pjsip_refer: Handle INVITE with Replaces failure after answer. * Fixed hangup handling of the session->channel after answer if the ast_channel_move() or ast_bridge_impart() fails. We are still the thread controlling the session->channel so we need to call ast_hangup() to kill the channel. * Fixed debug messages in refer_incoming_invite_request() referencing incorrect channnels on success. Code comments now say why the session->channel cannot be used. Review: https://reviewboard.asterisk.org/r/4422/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431956 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	6d3fcfc3c2	res_pjsip_refer: Fix crash from a REFER and BYE collision. Analyzing a one-off crash on a busy system showed that processing a REFER request had a NULL session channel pointer. The only way I can think of that could cause this is if an outgoing BYE transaction overlapped the incoming REFER transaction in a collision. Asterisk sends a BYE while the phone sends a REFER to complete an attended transfer. * Made check the session channel pointer before processing an incoming REFER request in res_pjsip_refer. * Fixed similar crash potential for res_pjsip supplement incoming request processing for res_pjsip_sdp_rtp INFO, res_pjsip_caller_id INVITE/UPDATE, res_pjsip_messaging MESSAGE, and res_pjsip_send_to_voicemail REFER messages. * Made res_pjsip_messaging respond to a message body too large with a 413 instead of ignoring it. ASTERISK-24700 #close Reported by: Zane Conkle Review: https://reviewboard.asterisk.org/r/4417/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431898 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	562b7bf6f0	res/res_rtp_asterisk: Fix crash in debug from RTCP reports without report block When RTCP debugging was enabled, an RTCP report without a report block would cause a crash. This was due to the verbose output not checking to see if the report_block pointer was NULl before dereferencing it. This patch adds the necessary check to prevent printing any verbose output if the far side hasn't provided us the information they should have. ASTERISK-24791 #close Reported by: JoshE Tested by: JoshE git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431879 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	c8f3074cc4	res_sorcery_config: Improve object lookup times. The res_sorcery_config module currently uses a fixed bucket size of 53. This means that depending on the number of objects you either end up with excess buckets or a lot of collisions. Due to the way that res_sorcery_config is implemented it's actually possible to make the bucket size dynamic based on the number of objects. This is due to the fact that each loading of the config file produces a new container and does not modify the existing one. This change uses the number of expected objects and finds a prime number near it. In practice depending on the number of objects this can speed up lookups anywhere from 2X to 15X. This change also removes the lock from the container as it is not needed. Review: https://reviewboard.asterisk.org/r/4423/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431841 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	a3044cbf02	res_pjsip: Add "pjsip show version" CLI command. When debugging things it can be useful to know absolutely what version of pjproject res_pjsip is running against. This change adds a "pjsip show version" CLI command which can be used to query for this. ASTERISK-24685 #close Reported by: Joshua Colp Review: https://reviewboard.asterisk.org/r/4424/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431824 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	ce70587ba6	res_timing_pthread: Fix leaky pipes. During some refactoring the way private information for timers was stored was changed. As a result of this the action which normally removed the timer upon closure in res_timing_pthread was also removed causing the timer to remain after it should using up resources. This change ensures that the timer is removed upon closure. ASTERISK-24768 #close Reported by: Matthias Urlichs patches: timer.patch submitted by Matthias Urlichs (license 5508) git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431807 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	8c6e3ad3b4	res_pjsip_exten_state: Improve log message when a subscription is attempted to a non-existent extension. ASTERISK-24716 #close Reported by: Rusty Newton git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431754 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	4d797f17c5	res_pjsip_session: Fix double re-INVITE collision crash. A multi-asterisk box setup with direct media enabled would occasionally crash when two re-INVITE collisions on a call leg happen in a row. The re-INVITE logic only had one timer struct to defer the re-INVITE. When the second collision happens the timer struct is overwritten and put into the timer heap again. Resources for the first timer are leaked and the heap has two positions occupied by the same timer struct. Now the heap ordering is potentially corrupted, the timer will fire twice, and any resources allocated for the second timer will be released twice. * The solution is to put the collided re-INVITE into the delayed requests queue with all the other delayed requests and cherry pick the next request that can come off the queue when an event happens. * Changed to put delayed BYE requests at the head of the delayed queue. There is no sense in processing delayed UPDATEs and re-INVITEs when a BYE has been requested. * Made the start of a BYE request flush the delayed requests queue to prevent a delayed request from overlapping the BYE transaction. I saw a few cases where a delayed re-INVITE got started after the BYE transaction started. * Changed the delayed_request struct to use an enum instead of a string for the request method. Cherry picking the queue is easier with an enum than string comparisons and the compiler can warn if a switch statement does not cover all defined enum values. * Improved the debug output to give more information. It helps to know which channel is involved with an endpoint. Trunks can have many channels associated with the endpoint at the same time. ASTERISK-24727 #close Reported by: Mark Michelson Review: https://reviewboard.asterisk.org/r/4414/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431734 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	1995baad71	ARI/PJSIP: Add the ability to redirect (transfer) a channel in a Stasis app This patch adds a new feature to ARI to redirect a channel to another server, and fixes a few bugs in PJSIP's handling of the Transfer dialplan application/ARI redirect capability. New Feature A new operation has been added to the ARI channels resource, redirect. With this, a channel in a Stasis application can be redirected to another endpoint of the same underlying channel technology. Bug fixes In the process of writing this new feature, two bugs were fixed in the PJSIP stack: (1) The existing .transfer channel callback had the limitation that it could only transfer channels to a SIP URI, i.e., you had to pass 'PJSIP/sip:foo@my_provider.com' to the dialplan application. While this is still supported, it is somewhat unintuitive - particularly in a world full of endpoints. As such, we now also support specifying the PJSIP endpoint to transfer to. (2) res_pjsip_multihomed was, unfortunately, trying to 'help' a 302 redirect by updating its Contact header. Alas, that resulted in the forwarding destination set by the dialplan application/ARI resource/whatever being rewritten with very incorrect information. Hence, we now don't bother updating an outgoing response if it is a 302. Since this took a looong time to find, some additional debug statements have been added to those modules that update the Contact headers. Review: https://reviewboard.asterisk.org/r/4316/ ASTERISK-24015 #close Reported by: Private Name ASTERISK-24703 #close Reported by: Matt Jordan git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431717 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kevin Harwell	e8ec15a9ef	res_pjsip: dtls_handler causes Asterisk to crash There have been a couple of times where a crash occurred in the dtls_handler section of the code for res_pjsip. Unfortunately, in working this issue the problem was unable to be reproduced. After looking at the backtraces and through the code the current best guess as to why this happened might be due to a reentrance problem and the strtok function. So, the current fix is to convert the strtok function into the reentrant version of the function, strtok_r. ASTERISK-24741 #close Reported by: Zane Conkle Review: https://reviewboard.asterisk.org/r/4409/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431698 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kevin Harwell	e64d151fae	ari_websockets: removed extra check on websocket session read When merging the websocket timeout issue (ASTERISK-24701) an extra, almost duplicate, check was left in the code that should not have been. This removes it. ASTERISK-24701 #close Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/4412/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431693 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	feddab7944	HTTP: Stop accepting requests on final system shutdown. There are three CLI commands to stop and restart Asterisk each. 1) core stop/restart now - Hangup all calls and stop or restart Asterisk. New channels are prevented while the shutdown request is pending. 2) core stop/restart gracefully - Stop or restart Asterisk when there are no calls remaining in the system. New channels are prevented while the shutdown request is pending. 3) core stop/restart when convenient - Stop or restart Asterisk when there are no calls in the system. New calls are not prevented while the shutdown request is pending. ARI has made stopping/restarting Asterisk more problematic. While a shutdown request is pending it is desirable to continue to process ARI HTTP requests for current calls. To handle the current calls while a shutdown request is pending, a new committed to shutdown phase is needed so ARI applications can deal with the calls until the system is fully committed to shutdown. * Added a new shutdown committed phase so ARI applications can deal with calls until the final committed to shutdown phase is reached. * Made refuse new HTTP requests when the system has reached the final system shutdown phase. Starting anything while the system is actively releasing resources and unloading modules is not a good thing. * Split the bridging framework shutdown to not cleanup the global bridging containers when shutting down in a hurry. This is similar to how other modules prevent crashes on rapid system shutdown. * Moved ast_begin_shutdown(), ast_cancel_shutdown(), and ast_shutting_down(). You should not have to include channel.h just to access these system functions. ASTERISK-24752 #close Reported by: Matthew Jordan Review: https://reviewboard.asterisk.org/r/4399/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431692 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kevin Harwell	72e5ba2ce8	res_http_websocket: websocket write timeout fails to fully disconnect When writing to a websocket if a timeout occurred the underlying socket did not get closed/disconnected. This patch makes sure the websocket gets disconnected on a write timeout. Also a notice is logged stating that the websocket was disconnected. ASTERISK-24701 #close Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/4412/ ........ Merged revisions 431669 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431670 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
George Joseph	4d8ab20a8a	res_pjsip_config_wizard: Add ability to auto-create hints. Looking at the Super Awesome Company sample reminded me that creating hints is just plain gruntwork. So you can now have the pjsip conifg wizard auto-create them for you. Specifying 'hint_exten' in the wizard will create 'exten => <hint_exten>,hint/PJSIP/<wizard_id>' in whatever is specified for 'hint_context'. Specifying 'hint_application' in the wizard will create 'exten => <hint_exten>,1,<hint_application>' in whatever is specified for 'hint_context'. The default for 'hint_context' is the endpoint's context. There's no default for 'hint_application'. If not specified, no app is added. There's no default for 'hint_exten'. If not specified, neither the hint itself nor the application will be created. Some may think this is the slippery slope to users.conf but hints are a basic necessity for phones unlike voicemail, manager, etc that users.conf creates. Tested-by: George Joseph Review: https://reviewboard.asterisk.org/r/4383/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431643 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	32e42e50cc	res/ari/resource_channels: Add missing 'no_answer' reason to DELETE /channels One of the canonical reasons for hanging up a channel is because the far end failed to answer - or because someone else answered, and we want to get rid of this channel. This patch adds the missing value to the 'reason' query parameter for the DELETE /channels operation. Review: https://reviewboard.asterisk.org/r/4400 ASTERISK-24745 #close Reported by: Ben Merrills patches: add_no_answer_ari_hangup_cause.diff uploaded by Ben Merrills (License 6678) git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431622 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	8582411344	res/res_odbc: Remove unneeded queries when determining if a table exists This patch modifies the ast_odbc_find_table function such that it only performs a lookup of the requested table if the table is not already known. Prior to this patch, a queries would be executed against the database even if the table was already known and cached. Review: https://reviewboard.asterisk.org/r/4405/ ASTERISK-24742 #close Reported by: ibercom patches: patch.diff uploaded by ibercom (License 6599) ........ Merged revisions 431617 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431618 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	675b2b8103	res/res_pjsip_sdp_rtp: Fix leak of local ICE candidates when applying to SDP When an SDP is created for an outgoing request/response, the ICE candidates obtained from the RTP instance are currently leaked. This causes the ao2 container that holds the candidates to never properly be reclaimed when the RTP instance is destroyed. This patch properly decrements the ICE candidates' container if it is successfully obtained. ASTERISK-24769 #close Reported by: Matt Jordan git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431600 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Scott Griepentrog	323c0927ac	various: cleanup issues found during leak hunt In this collection of small patches to prevent Valgrind errors are: fixes for reference leaks in config hooks, evaluating a parameter beyond bounds, and accessing a structure after a lock where it could have been already free'd. Review: https://reviewboard.asterisk.org/r/4407/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431583 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	18c8c1bae3	res_pjsip_keepalive: Don't crash if PJSIP module is not loaded. git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431555 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	f67402a52a	res_format_attr_h264: Fix crash when determining joint capability. The res_format_attr_h264 module currently incorrectly attempts to copy SPS and PPS information from the wrong attribute. This change fixes that. ASTERISK-24616 #close Reported by: Yura Kocyuba Review: https://reviewboard.asterisk.org/r/4392/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431521 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kevin Harwell	6583b4de98	res_pjsip_outbound_publish: eventually crashes when no response is ever received When Asterisk attempts to send SIP outbound publish information and no response is ever received (no 200 okay, 412, 423) the system eventually crashes. A response is never received because the system Asterisk is attempting to send publish information to is not available. The underlying pjsip framework attempts to send publish information. After several attempts it calls back into the Asterisk outbound publish code. At this point if the "client->queue" is empty Asterisk attempts to schedule a refresh which utilizes "rdata" and since no response was received the given "rdata" struture is NULL. Attempting to dereference a NULL object of course results in a crash. The fix here removes the dependency on rdata for schedule_publish_refresh. Instead param->expiration is now passed to it as this is set to -1 if no response is received. Also added a notification when no response is received. ASTERISK-24635 #close Reported by: Marco Paland Review: https://reviewboard.asterisk.org/r/4384/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431490 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Mark Michelson	43dd42d8ae	Fix some memory leaks. These memory leaks were found and fixed by John Hardin. I'm just committing them for him. ASTERISK-24736 #close Reported by Mark Michelson Review: https://reviewboard.asterisk.org/r/4389 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431468 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Scott Griepentrog	f7d23dfcc6	stasis transfer: fix stasis bridge push race part two When swapping a Local channel in place of one already in a bridge (to complete a bridge attended transfer), the channel that was swapped out can actually be hung up before the stasis bridge push callback executes on the independant transfer thread. This results in the stasis app loop dropping out and removing the control that has the the app name which the local replacement channel needs so it can re-enter stasis. To avoid this race condition a new push_peek callback has been added, and called from the ast_bridge_impart thread before it launches the independant thread that will complete the transfer. Now the stasis push_peek callback can copy the stasis app name before the swap channel can hang up. ASTERISK-24649 Review: https://reviewboard.asterisk.org/r/4382/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431450 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Mark Michelson	e8896ac008	Use SIPS URIs in Contact headers when appropriate. RFC 3261 sections 8.1.1.8 and 12.1.1 dictate specific scenarios when we are required to use SIPS URIs in Contact headers. Asterisk's non-compliance with this could actually cause calls to get dropped when communicating with clients that are strict about checking the Contact header. Both of the SIP stacks in Asterisk suffered from this issue. This changeset corrects the behavior in res_pjsip/chan_pjsip.c Review: https://reviewboard.asterisk.org/r/4345 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431426 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Mark Michelson	b8ea23b0d1	Allow disabling of 100rel support on PJSIP endpoints. Due to an inversion error, setting 100rel=no would not actually change the current value of the setting (which defaulted to "yes"). With this fix, the inversion is corrected. git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431420 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
George Joseph	6e5eb9af88	res_pjsip_exten_state: Reduce log clutter... change a WARNING to a VERBOSE/2 Reduce log clutter by changing the "Watcher for hint %s (removed\|deactivated)" message from WARNING to VERBOSE/2. Tested-by: George Joseph Review: https://reviewboard.asterisk.org/r/4387/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431403 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	e0461290d0	res_rtp_asterisk: Fix DTLS when used with OpenSSL 1.0.1k A recent security fix for OpenSSL broke DTLS negotiation for many applications. This was caused by read ahead not being enabled when it should be. While a commit has gone into OpenSSL to force read ahead on for DTLS it may take some time for a release to be made and the change to be present in distributions (if at all). As enabling read ahead is a simple one line change this commit does that and fixes the issue. ASTERISK-24711 #close Reported by: Jared Biel ........ Merged revisions 431384 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431385 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Mark Michelson	8c068fc096	Fix file descriptor leak in RTP code. SIP requests that offered codecs incompatible with configured values could result in the allocation of RTP and RTCP ports that would not get reclaimed later. ASTERISK-24666 #close Reported by Y Ateya Review: https://reviewboard.asterisk.org/r/4323 AST-2015-001 ........ Merged revisions 431300 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431303 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Sean Bright	c3add776af	media formats: update res_format_attr_opus & silk In r419044, we changed how formats were handled, but the return value of the format_parse_sdp_fmtp functions in res_format_attr_opus and res_format_attr_silk were not updated, causing calls to fail. Ran into this when getting codec_opus working with Asterisk 13. Once the return value was corrected, we were crashing in opus_getjoint because of NULL format attributes. I've fixed this as well in this patch. Review: https://reviewboard.asterisk.org/r/4371/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431267 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	88fbe4e917	res_pjsip_outbound_registration: Fix reload race condition. Performing a CLI "module reload" command when there are new pjsip.conf registration objects defined frequently failed to load them correctly. What happens is a race condition between res_pjsip pushing its reload into an asynchronous task processor task and the thread that does the rest of the reloads when it gets to reloading the res_pjsip_outbound_registration module. A similar race condition happens between a reload and the CLI/AMI show registrations commands. The reload updates the current_states container and the CLI/AMI commands call get_registrations() which builds a new current_states container. * Made res_pjsip.c reload_module() use ast_sip_push_task_synchronous() instead of ast_sip_push_task() to eliminate two threads processing config reloads at the same time. * Made get_registrations() not replace the global current_states container so the CLI/AMI show registrations command cannot interfere with reloading. You could never add/remove objects in the container without the possibility of the container being replaced out from under you by get_registrations(). * Added a registration loaded sorcery instance observer to purge any dead registration objects since get_registrations() cannot do this job anymore. The struct ast_sorcery_instance_observer callbacks must be used because the callback happens inline with the load process. The struct ast_sorcery_observer callbacks are pushed to a different thread. * Added some global current_states NULL pointer checks in case the container disappears because of unload_module(). * Made sorcery's struct ast_sorcery_instance_observer.object_type_loaded callbacks guaranteed to be called before any struct ast_sorcery_observer.loaded callbacks will be called. * Moved the check for non-reloadable objects to before the sorcery instance loading callbacks happen to short circuit unnecessary work. Previously with non-reloadable objects, the sorcery instance loading/loaded callbacks would always happen, the individual wizard loading/loaded would be prevented, and the non-reloadable type logging message would be logged for each associated wizard. ASTERISK-24729 #close Review: https://reviewboard.asterisk.org/r/4381/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431243 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kevin Harwell	9e3d316dd1	res_pjsip: make it unloadable (take 2) Due to the original patch causing memory corruptions it was removed until the problem could be resolved. This patch is the original patch plus some added locking around stasis router subcription that was needed to avoid the memory corruption. Description of the original problem and patch (still applicable): The res_pjsip module was previously unloadable. With this patch it can now be unloaded. This patch is based off the original patch on the issue (listed below) by Corey Farrell with a few modifications. Namely, removed a few changes not required to make the module unloadable and also fixed a bug that would cause asterisk to crash on unloading. This patch is the first step (should hopefully be followed by another/others at some point) in allowing res_pjsip and the modules that depend on it to be unloadable. At this time, res_pjsip and some of the modules that depend on res_pjsip cannot be unloaded without causing problems of some sort. The goal of this patch is to get res_pjsip and only res_pjsip to be able to unload successfully and/or shutdown without incident (crashes, leaks, etc...). Other dependent modules may still cause problems on unload. Basically made sure, with the patch applied, that res_pjsip (with no other dependent modules loaded) could be succesfully unloaded and Asterisk could shutdown without any leaks or crashes that pertained directly to res_pjsip. ASTERISK-24485 #close Reported by: Corey Farrell Review: https://reviewboard.asterisk.org/r/4363/ patches: pjsip_unload-broken-r1.patch submitted by Corey Farrell (license 5909) git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431179 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	b64f4bb6ee	bridge / res_pjsip_sdp_rtp: Fix issues with media not being reinvited during direct media. This change fixes two issues: 1. During a swap operation bridging added the new channel before having the swap channel leave. This was not handled in bridge_native_rtp and could result in a channel not getting reinvited back to Asterisk. After this change the swap channel will leave first and the new channel will then join. 2. If a re-invite was received after a session had been established any upstream elements (such as bridge_native_rtp) were not notified that they may want to re-evaluate things. After this change an UPDATE_RTP_PEER control frame is queued when this situation occurs and upstream can react. AST-1524 #close Review: https://reviewboard.asterisk.org/r/4378/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431157 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	7f9b28b0c6	ARI: Improve wiki documentation This patch improves the documentation of ARI on the wiki. Specifically, it addresses the following: * Allowed values and allowed ranges weren't documented. This was particularly frustrating, as Asterisk would reject query parameters with disallowed values - but we didn't tell anyone what the allowed values were. * The /play/id operation on /channels and /bridges failed to document all of the added media resource types. * Documentation for creating a channel into a Stasis application failed to note when it occurred, and that creating a channel into Stasis conflicts with creating a channel into the dialplan. * Some other minor tweaks in the mustache templates, including italicizing the parameter type, putting the default value on its own sub-bullet, and some other nicities. Review: https://reviewboard.asterisk.org/r/4351 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431145 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	ceedd40370	res_parking: Fix crash due to race condition when unloading. There is currently a race condition when unloading the res_parking module. Depending on the will of the universe the subscription invocation may occur AFTER the module is unloaded. This is because the module does NOT use stasis_unsubscribe_and_join when terminating the subscription. It merely uses stasis_unsubscribe. This change makes it use stasis_unsubscribe_and_join which is documented for usage in this exact scenario. AST-1520 #close Review: https://reviewboard.asterisk.org/r/4375/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431114 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
David M. Lee	702d79de2a	Various fixes for OS X This patch addresses compilation errors on OS X. It's been a while, so there's quite a few things. * Fixed __attribute__ decls in route.h to be portable. * Fixed htonll and ntohll to work when they are defined as macros. * Replaced sem_t usage with our ast_sem wrapper. * Added ast_sem_timedwait to our ast_sem wrapper. * Fixed some GCC 4.9 warnings using sigset() functions. Fixed some format strings for portability. * Fixed compilation issues with res_timing_kqueue (although tests still fail on OS X). * Fixed menuconfig /sbin/launchd detection, which disables res_timing_kqueue on OS X). ASTERISK-24539 #close Reported by: George Joseph ASTERISK-24544 #close Reported by: George Joseph Review: https://reviewboard.asterisk.org/r/4327/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431092 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
David M. Lee	197265438e	Add depend on pjproject to res_pjsip_config_wizard.c git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431030 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kevin Harwell	630eea087d	Investigate and fix memory leaks in Asterisk Fixed memory leaks that were found in Asterisk. ASTERISK-24693 #close Reported by: Kevin Harwell Review: https://reviewboard.asterisk.org/r/4347/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430999 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Walter Doekes	e23f07beb8	Fix typo's (retrieve, specified, address). ........ Merged revisions 430996 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430998 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	c73b4b2a46	res_pjsip_outbound_registration.c: Minor code cleanup. * Add an allocation failure check and assert in sip_outbound_registration_response_cb(). * Made sip_outbound_registration_state_destroy() handle partially created state objects from sip_outbound_registration_state_alloc(). Review: https://reviewboard.asterisk.org/r/4366/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430957 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Scott Griepentrog	bdfdb01bcf	stasis transfer: fix a race condition on stasis bridge push After a bridge transfer completes where a local replacement channel is used, a stasis transfer message with the details of the transfer is sent. This is processed by stasis which then sets the stasis app name and replaced channel snapshot on the replacement channel. However, since a separate thread was already started to run stasis on the new replacement channel, a race was on to see if the message processing would be completed before the app name was needed, otherwise the channel would be hung up. This change moves the calls used to set the stasis app name and the replace snapshot to the bridge_stasis_push function callback from the bridge transfer logic, allowing the steps to be completed earlier and more deterministically, and the race elimianted. NOTE: the swap channel parameter to bridge_stasis_push (and thus all bridge push callbacks) must always be present when performing a swap with another channel. ASTERISK-24649 #close Reported by: John Bigelow Review: https://reviewboard.asterisk.org/r/4341/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430939 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	5e10007dbd	res_pjsip_outbound_registration.c: Move unref to a better place. Move an unconditional unref of client_state so it doesn't look like it could be used after the last ref has destroyed it. git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430902 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Ashley Sanders	a7ba8a58a8	ARI: Fixed crash that occurred when updating a bridge when the optional query parameter 'name' was not supplied. Prior to this changeset, posting to the: /ari/bridges/{bridgeId} endpoint without specifying a value for the [name] query parameter, would crash Asterisk if the bridge you are attempting to create (or update) had the same ID as an existing bridge. The internal mechanism of the POST operation interpreted a null value for name, thus resulting in an error condition that crashed Asterisk. ASTERISK-24560 #close Reported By: Kinsey Moore Review: https://reviewboard.asterisk.org/r/4349/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430818 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	6af6a216a1	CHANNEL(peer), chan_iax2, res_fax, SNMP agent: Fix deadlock from reaching across a bridge. Calling ast_channel_bridge_peer() cannot be done while holding any channel locks. The reported issue hit the deadlock in chan_iax2, but an audit of the ast_channel_bridge_peer() calls found three more locations where the same deadlock can occur. * Made CHANNEL(peer), res_fax, and the SNMP agent not call ast_channel_bridge_peer() with any channel locked. For CHANNEL(peer) I had to rework the logic to not hold the channel lock. * Made chan_iax2 no longer call ast_channel_bridge_peer(). It was done for legacy reasons that no longer apply. * Removed the iax.conf forcejitterbuffer option. It is now always enabled when the jitterbuffer option is enabled. If you put a jitter buffer on a channel it will be on the channel. ASTERISK-24600 #close Reported by: Jeff Collell Review: https://reviewboard.asterisk.org/r/4342/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430817 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	643b81d98e	res_pjsip / res_pjsip_multihomed: Use the correct transport and addressing information on UAS sessions. The first thing this patch fixes is UAS dialogs. Previously if a transport was configured on an endpoint and an inbound session was created there was no guarantee that requests sent on the dialog would use the correct transport and address information. This has now been fixed so an explicitly configured transport is taken into account. The second thing this patch fixes is res_pjsip_multihomed. The res_pjsip_multihomed module attempts to determine what transport a message should go out on and what addressing information should go into the message itself. In a scenario where multiple transports exist bound to the same IP address but a different port the code would incorrectly alter the transport and change the message to the wrong transport. This change makes the res_pjsip_multihomed module smarter so it will only change the transport and address information in the message when it is possible and makes sense. ASTERISK-24615 #close Reported by: David Justl Review: https://reviewboard.asterisk.org/r/4331/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430755 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kevin Harwell	34c220203f	REVERTING res_pjsip: make it unloadable Due to the original patch causing memory corruptions the patch is being removed until the problem can be resolved. git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430734 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Mark Michelson	821c15ae53	Fix problem where a hung channel could occur on a failed blind transfer. Different clients react differently to being told that a blind transfer has failed. Some will simply send a BYE and be done with it. Others will attempt to reinvite themselves back onto the call. In the latter case, we were creating a new channel and then leaving it to sit forever doing nothing. With this code change, that new channel will not be created and the dialog with the transferring channel will be cleaned up properly. ASTERISK-24624 #close Reported by Zane Conkle Review: https://reviewboard.asterisk.org/r/4339 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430714 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Mark Michelson	8bc4a89e1f	Add support for the ca_list_path option for PJSIP transports. This allows for a path to be specified that has a collection of CA certificates in it. ASTERISK-24575 #close Reported by cloos Patches: pj-ca-path-trunk.diff uploaded by cloos (License #5956) Review: https://reviewboard.asterisk.org/r/4344 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430709 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	fa80d9658d	res_fax.c, res_fax_spandsp.c: Remove redundant locking. When FAX was developed, apparently the faxregistry.container used to be a linked list that was converted to an ao2 container. Some of the replacement ao2 container operations still had explicit lock/unlocks around them. Three off nominal code paths in res_fax.c and res_fax_spandsp.c unlock the channel even though the routine did not lock the channel and other code paths in the routine do not unlock the channel. Review: https://reviewboard.asterisk.org/r/4340/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430687 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago

1 2 3 4 5 ...

2841 Commits (f0d018e249177b755cafc9cf8d1fbd6e53839df7)