319 Commits (eeffad1b62a38a744339d7fe77b881df2ebc95dc)

Author	SHA1	Message	Date
Jeremy Lainé	d162789c4d	res_rtp_asterisk: make it possible to remove SOFTWARE attribute ... By default Asterisk reports the PJSIP version in a SOFTWARE attribute of every STUN packet it sends. This may not be desired in a production environment, and RFC5389 recommends making the use of the SOFTWARE attribute a configurable option: https://datatracker.ietf.org/doc/html/rfc5389#section-16.1.2 This patch adds a `stun_software_attribute` yes/no option to make it possible to omit the SOFTWARE attribute from STUN packets. ASTERISK-29434 Change-Id: Id3f2b1dd9584536ebb3a1d7e8395fd8b3e46860b	5 years ago
George Joseph	9cc1d6fc22	res_pjsip_outbound_authenticator_digest: Be tolerant of RFC8760 UASs ... RFC7616 and RFC8760 allow more than one WWW-Authenticate or Proxy-Authenticate header per realm, each with different digest algorithms (including new ones like SHA-256 and SHA-512-256). Thankfully however a UAS can NOT send back multiple Authenticate headers for the same realm with the same digest algorithm. The UAS is also supposed to send the headers in order of preference with the first one being the most preferred. We're supposed to send an Authorization header for the first one we encounter for a realm that we can support. The UAS can also send multiple realms, especially when it's a proxy that has forked the request in which case the proxy will aggregate all of the Authenticate headers and then send them all back to the UAC. It doesn't stop there though... Each realm can require a different username from the others. There's also nothing preventing each digest algorithm from having a unique password although I'm not sure if that adds any benefit. So now... For each Authenticate header we encounter, we have to determine if we support the digest algorithm and, if not, just skip the header. We then have to find an auth object that matches the realm AND the digest algorithm or find a wildcard object that matches the digest algorithm. If we find one, we add it to the results vector and read the next Authenticate header. If the next header is for the same realm AND we already added an auth object for that realm, we skip the header. Otherwise we repeat the process for the next header. In the end, we'll have accumulated a list of credentials we can pass to pjproject that it can use to add Authentication headers to a request. NOTE: Neither we nor pjproject can currently handle digest algorithms other than MD5. We don't even have a place for it in the ast_sip_auth object. For this reason, we just skip processing any Authenticate header that's not MD5. When we support the others, we'll move the check into the loop that searches the objects. Changes: * Added a new API ast_sip_retrieve_auths_vector() that takes in a vector of auth ids (usually supplied on a call to ast_sip_create_request_with_auth()) and populates another vector with the actual objects. * Refactored res_pjsip_outbound_authenticator_digest to handle multiple Authenticate headers and set the stage for handling additional digest algorithms. * Added a pjproject patch that allows them to ignore digest algorithms they don't support. This patch has already been merged upstream. * Updated documentation for auth objects in the XML and in pjsip.conf.sample. * Although res_pjsip_authenticator_digest isn't affected by this change, some debugging and a testsuite AMI event was added to facilitate testing. Discovered during OpenSIPit 2021. ASTERISK-29397 Change-Id: I3aef5ce4fe1d27e48d61268520f284d15d650281	5 years ago
Naveen Albert	04454fc238	AMI: Add AMI event to expose hook flash events ... Although Asterisk can receive and propogate flash events, it currently provides no mechanism for doing anything with them itself. This AMI event allows flash events to be processed by Asterisk. Additionally, AST_CONTROL_FLASH is included in a switch statement in channel.c to avoid throwing a warning when we shouldn't. ASTERISK-29380 Change-Id: Ie17ffe65086e0282c88542e38eed6a461ec79e81	5 years ago
Ben Ford	0564d12280	STIR/SHAKEN: Switch to base64 URL encoding. ... STIR/SHAKEN encodes using base64 URL format. Currently, we just use base64. New functions have been added that convert to and from base64 encoding. The origid field should also be an UUID. This means there's no reason to have it as an option in stir_shaken.conf, as we can simply generate one when creating the Identity header. https://wiki.asterisk.org/wiki/display/AST/OpenSIPit+2021 Change-Id: Icf094a2a54e87db91d6b12244c9f5ba4fc2e0b8c	5 years ago
Ben Ford	259ecfa289	STIR/SHAKEN: Fix certificate type and storage. ... During OpenSIPit, we found out that the public certificates must be of type X.509. When reading in public keys, we use the corresponding X.509 functions now. We also discovered that we needed a better naming scheme for the certificates since certificates with the same name would cause issues (overwriting certs, etc.). Now when we download a public certificate, we get the serial number from it and use that as the name of the cached certificate. The configuration option public_key_url in stir_shaken.conf has also been renamed to public_cert_url, which better describes what the option is for. https://wiki.asterisk.org/wiki/display/AST/OpenSIPit+2021 Change-Id: Ia00b20835f5f976e3603797f2f2fb19672d8114d	5 years ago
Sean Bright	4a843e00ef	res_pjsip.c: OPTIONS processing can now optionally skip authentication ... ASTERISK-27477 #close Change-Id: I68f6715bba92a525149e35d142a49377a34a1193	5 years ago
George Joseph	512d38868c	res_pjsip: Update documentation for the auth object ... Change-Id: I2f76867ce02ec611964925159be099de83346e38	5 years ago
Ben Ford	45a1977de4	res_aeap: Add basic config skeleton and CLI commands. ... Added support for a basic AEAP configuration read from aeap.conf. Also added 2 CLI commands for showing individual configurations as well as all of them: aeap show server <id> and aeap show servers. Only one configuration option is required at the moment, and that one is server_url. It must be a websocket URL. The other option, codecs, is optional and will be used over the codecs specified on the endpoint if provided. https://wiki.asterisk.org/wiki/pages/viewpage.action?pageId=45482453 Change-Id: I567ac5148c92b98d29d2ad83421b416b75ffdaa3	5 years ago
Sean Bright	c2dbfb9a8e	modules.conf: Fix more differing usages of assignment operators. ... I missed the changes in 18 and master in the previous review. ASTERISK-24434 #close Change-Id: Ieb132b2a998ce96daa9c9acf26535a974b895876	5 years ago
Ben Ford	25758670b8	logger.conf.sample: Add more debug documentation. ... Change-Id: Iff0e713f2120d8dce8e1e26924b99ed17f9d9dff	5 years ago
Ben Ford	55c53de022	logging: Add .log to samples and update asterisk.logrotate. ... Added .log extension to the sample logs in logger.conf.sample so that they will be able to be opened in the browser when attached to JIRA tickets. Because of this, asterisk.logrotate has also been updated to look for .log extensions instead of no extension for log files such as full and messages. Change-Id: I5de743c03f08047d6c6cc80cac5019ae0c4c200f	5 years ago
Sean Bright	aac442eecd	app_queue.c: Remove dead 'updatecdr' code. ... Also removed the sample documentation, and some oddly-placed documentation about the timeout argument to the Queue() application itself. There is a large section on the timeout behavior below. ASTERISK-26614 #close Change-Id: I8f84e8304b50305b7c4cba2d9787a5d77c3a6217	5 years ago
Sean Bright	cad843fe07	queues.conf.sample: Correct 'context' documentation. ... ASTERISK-24631 #close Change-Id: I8bf8776906a72ee02f24de6a85345940b9ff6b6f	5 years ago
Sean Bright	55bd104589	modules.conf: Fix differing usage of assignment operators. ... ASTERISK-24434 #close Change-Id: I0144e8d65d878128da59dcf3df12ca8cee47d6db	5 years ago
Jaco Kroon	b0f349a330	func_odbc: Introduce minargs config and expose ARGC in addition to ARGn. ... minargs enables enforcing of minimum count of arguments to pass to func_odbc, so if you're unconditionally using ARG1 through ARG4 then this should be set to 4. func_odbc will generate an error in this case, so for example [FOO] minargs = 4 and ODBC_FOO(a,b,c) in dialplan will now error out instead of using a potentially leaked ARG4 from Gosub(). ARGC is needed if you're using optional argument, to verify whether or not an argument has been passed, else it's possible to use a leaked ARGn from Gosub (app_stack). So now you can safely do ${IF($[${ARGC}>3]?${ARGV}:default value)} kind of thing. Change-Id: I6ca0b137d90b03f6aa9c496991f6cbf1518f6c24 Signed-off-by: Jaco Kroon <jaco@uls.co.za>	5 years ago
Sebastien Duthil	6e695c867f	app_mixmonitor: Add AMI events MixMonitorStart, -Stop and -Mute. ... ASTERISK-29244 Change-Id: I1862d58264c2c8b5d8983272cb29734b184d67c5	5 years ago
Alexander Traud	389b8b0774	rtp: Enable srtp replay protection ... Add option "srtpreplayprotection" rtp.conf to enable srtp replay protection. ASTERISK-29260 Reported by: Alexander Traud Change-Id: I5cd346e3c6b6812039d1901aa4b7be688173b458	5 years ago
George Joseph	91b0778791	chan_iax2.c: Require secret and auth method if encryption is enabled ... If there's no secret specified for an iax2 peer and there's no secret specified in the dial string, Asterisk will crash if the auth method requested by the peer is MD5 or plaintext. You also couldn't specify a default auth method in the [general] section of iax.conf so if you don't have static peers defined and just use the dial string, Asterisk will still crash even if you have a secret specified in the dial string. * Added logic to iax2_call() and authenticate_reply() to print a warning and hanhup the call if encryption is requested and there's no secret or auth method. This prevents the crash. * Added the ability to specify a default "auth" in the [general] section of iax.conf. ASTERISK-29624 Reported by: N A Change-Id: I5928e16137581f7d383fcc7fa04ad96c919e6254	5 years ago
lvl	b08427134f	Introduce astcachedir, to be used for temporary bucket files ... As described in the issue, /tmp is not a suitable location for a large amount of cached media files, since most distributions make /tmp a RAM-based tmpfs mount with limited capacity. I opted for a location that can be configured separately, as opposed to using a subdirectory of spooldir, given the different storage profile (transient files vs files that might stay there indefinitely). This commit just makes the cache directory configurable, and changes the default location from /tmp to /var/cache/asterisk. ASTERISK-29143 Change-Id: Ic54e95199405abacd9e509cef5f08fa14c510b5d	5 years ago
Alexander Traud	7c355d78cb	modules.conf: Align the comments for more conclusiveness. ... Change-Id: I79cc693cd5a6e5dd7d403b7e91d970ff1ddf8306	5 years ago
Dovid Bender	bc58e84f47	func_curl.c: Allow user to set what return codes constitute a failure. ... Currently any response from res_curl where we get an answer from the web server, regardless of what the response is (404, 403 etc.) Asterisk currently treats it as a success. This patch allows you to set which codes should be considered as a failure by Asterisk. If say we set failurecodes=404,403 then when using curl in realtime if a server gives a 404 error Asterisk will try to failover to the next option set in extconfig.conf ASTERISK-28825 Reported by: Dovid Bender Code by: Gobinda Paul Change-Id: I94443e508343e0a3e535e51ea6e0562767639987	5 years ago
Sean Bright	8f33e23dfb	features.conf.sample: Sample sound files incorrectly quoted ... ASTERISK-29136 #close Change-Id: I3186536d65a50014c8da4780c9224919caa81440	5 years ago
Andrew Siplas	0190e706b8	logger.conf.sample: add missing comment mark ... Add missing comment mark from stock configuration. ASTERISK-29123 #close Change-Id: I4f94eb4544166bca8af4c17fd11edee3c6980620	5 years ago
Joshua C. Colp	dcd2ed69a3	res_pjsip: Adjust outgoing offer call pref. ... This changes the outgoing offer call preference default option to match the behavior of previous versions of Asterisk. The additional advanced codec negotiation options have also been removed from the sample configuration and marked as reserved for future functionality in XML documentation. The codec preference options have also been fixed to enforce local codec configuration. ASTERISK-29109 Change-Id: Iad19347bd5f3d89900c15ecddfebf5e20950a1c2	5 years ago
George Joseph	773f424c7f	app_confbridge/bridge_softmix: Add ability to force estimated bitrate ... app_confbridge now has the ability to set the estimated bitrate on an SFU bridge. To use it, set a bridge profile's remb_behavior to "force" and set remb_estimated_bitrate to a rate in bits per second. The remb_estimated_bitrate parameter is ignored if remb_behavior is something other than "force". Change-Id: Idce6464ff014a37ea3b82944452e56cc4d75ab0a	5 years ago
Sean Bright	505211551a	res_musiconhold: Clarify that playlist mode only supports HTTP(S) URLs ... Change-Id: I41e77a04e4a523f4ed61a7a20b738ffd42be441e	5 years ago
Alexander Traud	8907a9f0b9	samples: Fix keep_alive_interval default in pjsip.conf. ... Since ASTERISK_27978 the default is not off but 90 seconds. That change happened because ASTERISK_27347 disabled the keep-alives in the bundled PJProject and Asterisk should behave the same as before. Change-Id: Ie63dc558ade6a5a2b969c30a4bd492d63730dc46	6 years ago
George Joseph	54ddf19141	logger.c: Added a new log formatter called "plain" ... Added a new log formatter called "plain" that always prints file, function and line number if available (even for verbose messages) and never prints color control characters. It also doesn't apply any special formatting for verbose messages. Most suitable for file output but can be used for other channels as well. You use it in logger.conf like so: debug => [plain]debug console => [plain]error,warning,debug,notice,pjsip_history messages => [plain]warning,error,verbose Change-Id: I4fdfe4089f66ce2f9cb29f3005522090dbb5243d	6 years ago
George Joseph	a15e64aaf5	ACN: Configuration renaming for pjsip endpoint ... This change renames the codec preference endpoint options. incoming_offer_codec_prefs becomes codec_prefs_incoming_offer to keep the options together when showing an endpoint. Change-Id: I6202965b4723777f22a83afcbbafcdafb1d11c8d	6 years ago
Ben Ford	5fbed5af24	res_stir_shaken: Add stir_shaken option and general improvements. ... Added a new configuration option for PJSIP endpoints - stir_shaken. If set to yes, then STIR/SHAKEN support will be added to inbound and outbound INVITEs. The default is no. Alembic has been updated to include this option. Previously the dialplan function was not trimming the whitespace from the parameters it recieved. Now it does. Also added a conditional that, when TEST_FRAMEWORK is enabled, the timestamp in the identity header will be overlooked. This is just for testing, since the testsuite will rely on a SIPp scenario with a preset identity header to trigger the MISMATCH result. Change-Id: I43d67f1489b8c1c5729ed3ca8d71e35ddf438df1	6 years ago
Walter Doekes	312c23b0e1	app_queue: (Breaking change) shared_lastcall and autofill default to no ... If your queues.conf had _no_ [general] section, they would default to 'yes'. Now, they always default to 'no'. (Actually, commit ed615afb7e already partially fixed it for shared_lastcall.) ASTERISK-28951 Change-Id: Ic39d8a0202906bc454194368bbfbae62990fe5f6	6 years ago
George Joseph	2d22e34206	ACN: res_pjsip endpoint options ... This commit adds the endpoint options required to control Advanced Codec Negotiation. incoming_offer_codec_prefs outgoing_offer_codec_prefs incoming_answer_codec_prefs outgoing_answer_codec_prefs The documentation may need tweaking and some additional edits added, especially for the "answer" prefs. That'll be handled when things finalize. This commit is safe to merge as it doens't alter any existing functionality nor does it alter the previous codec negotiation work which may now be obsolete. Change-Id: I920ba925d7dd36430dfd2ebd9d82d23f123d0e11	6 years ago
sungtae kim	81b5e4a73f	res_pjsip.c: Added disable_rport option for pjsip.conf ... Currently when the pjsip making an outgoing request, it keep adding the rport parameter in a request message as a default. This causes unexpected rport handle at the other end. Added option for disable this behaviour in the pjsip.conf. This is a system option, but working as a gloabl option. ASTERISK-28959 Change-Id: I9596675e52a742774738b5aad5d1fec32f477abc	6 years ago
Ben Ford	1274117102	res_stir_shaken: Add outbound INVITE support. ... Integrated STIR/SHAKEN support with outgoing INVITEs. When an INVITE is sent, the caller ID will be checked to see if there is a certificate that corresponds to it. If so, that information will be retrieved and an Identity header will be added to the SIP message. The format is: header.payload.signature;info=<public_key_url>alg=ES256;ppt=shaken Header, payload, and signature are all BASE64 encoded. The public key URL is retrieved from the certificate. Currently the algorithm and ppt are ES256 and shaken, respectively. This message is signed and can be used for verification on the receiving end. Two new configuration options have been added to the certificate object: attestation and origid. The attestation is required and must be A, B, or C. origid is the origination identifier. A new utility function has been added as well that takes a string, allocates space, BASE64 encodes it, then returns it, eliminating the need to calculate the size yourself. Change-Id: I1f84d6a5839cb2ed152ef4255b380cfc2de662b4	6 years ago
George Joseph	ca3c22c5f1	Scope Tracing: A new facility for tracing scope enter/exit ... What's wrong with ast_debug? ast_debug is fine for general purpose debug output but it's not really geared for scope tracing since it doesn't present its output in a way that makes capturing and analyzing flow through Asterisk easy. How is scope tracing better? Scope tracing uses the same "cleanup" attribute that RAII_VAR uses to print messages to a separate "trace" log level. Even better, the messages are indented and unindented based on a thread-local call depth counter. When output to a separate log file, the output is uncluttered and easy to follow. Here's an example of the output. The leading timestamps and thread ids are removed and the output cut off at 68 columns for commit message restrictions but you get the idea. --> res_pjsip_session.c:3680 handle_incoming PJSIP/1173-00000001 --> res_pjsip_session.c:3661 handle_incoming_response PJSIP/1173 --> res_pjsip_session.c:3669 handle_incoming_response PJSIP/ --> chan_pjsip.c:3265 chan_pjsip_incoming_response_after --> chan_pjsip.c:3194 chan_pjsip_incoming_response P chan_pjsip.c:3245 chan_pjsip_incoming_respon <-- chan_pjsip.c:3194 chan_pjsip_incoming_response P <-- chan_pjsip.c:3265 chan_pjsip_incoming_response_after <-- res_pjsip_session.c:3669 handle_incoming_response PJSIP/ <-- res_pjsip_session.c:3661 handle_incoming_response PJSIP/1173 <-- res_pjsip_session.c:3680 handle_incoming PJSIP/1173-00000001 The messages with the "-->" or "<--" were produced by including the following at the top of each function: SCOPE_TRACE(1, "%s\n", ast_sip_session_get_name(session)); Scope isn't limited to functions any more than RAII_VAR is. You can also see entry and exit from "if", "for", "while", etc blocks. There is also an ast_trace() macro that doesn't track entry or exit but simply outputs a message to the trace log using the current indent level. The deepest message in the sample (chan_pjsip.c:3245) was used to indicate which "case" in a "select" was executed. How do you use it? More documentation is available in logger.h but here's an overview: * Configure with --enable-dev-mode. Like debug, scope tracing is #ifdef'd out if devmode isn't enabled. * Add a SCOPE_TRACE() call to the top of your function. * Set a logger channel in logger.conf to output the "trace" level. * Use the CLI (or cli.conf) to set a trace level similar to setting debug level... CLI> core set trace 2 res_pjsip.so Summary Of Changes: * Added LOG_TRACE logger level. Actually it occupies the slot formerly occupied by the now defunct "event" level. * Added core asterisk option "trace" similar to debug. Includes ability to specify global trace level in asterisk.conf and CLI commands to turn on/off and set levels. Levels can be set globally (probably not a good idea), or by module/source file. * Updated sample asterisk.conf and logger.conf. Tracing is disabled by default in both. * Added __ast_trace() to logger.c which keeps track of the indent level using TLS. It's #ifdef'd out if devmode isn't enabled. * Added ast_trace() and SCOPE_TRACE() macros to logger.h. These are all #ifdef'd out if devmode isn't enabled. Why not use gcc's -finstrument-functions capability? gcc's facility doesn't allow access to local data and doesn't operate on non-function scopes. Known Issues: The only know issue is that we currently don't know the line number where the scope exited. It's reported as the same place the scope was entered. There's probably a way to get around it but it might involve looking at the stack and doing an 'addr2line' to get the line number. Kind of like ast_backtrace() does. Not sure if it's worth it. Change-Id: Ic5ebb859883f9c10a08c5630802de33500cad027	6 years ago
Ben Ford	e29df34de0	res_stir_shaken: Added dialplan function and API call. ... Adds the "STIR_SHAKEN" dialplan function and an API call to add a STIR_SHAKEN verification result to a channel. This information will be held in a datastore on the channel that can later be queried through the "STIR_SHAKEN" dialplan funtion to get information on STIR_SHAKEN results including identity, attestation, and verify_result. Here are some examples: STIR_SHAKEN(count) STIR_SHAKEN(0, identity) STIR_SHAKEN(1, attestation) STIR_SHAKEN(2, verify_result) Getting the count can be used to iterate through the results and pull information by specifying the index and the field you want to retrieve. Change-Id: Ice6d52a3a7d6e4607c9c35b28a1f7c25f5284a82	6 years ago
Joshua C. Colp	6cfc6ff53c	confbridge: Add support for disabling text messaging. ... When in a conference bridge it may be necessary to have text messages disabled for specific participants or for all. This change adds a configuration option, "text_messaging", which can be used to enable or disable this on the user profile. By default existing behavior is preserved as it defaults to "yes". ASTERISK-28841 Change-Id: I30b5d9ae6f4803881d1ed9300590d405e392bc13	6 years ago
George Joseph	2ee455958e	codec_negotiation: Implement outgoing_call_offer_pref ... Based on this new endpoint setting, a joint list of preferred codecs between those received from the Asterisk core (remote), and those specified in the endpoint's "allow" parameter (local) is created and is used to create the outgoing SDP offer. * Add outgoing_call_offer_pref to pjsip_configuration (endpoint) * Add "call_direction" to res_pjsip_session. * Update pjsip_session_caps.c to make the functions more generic so they could be used for both incoming and outgoing. * Update ast_sip_session_create_outgoing to create the pending_media_state->topology with the results of ast_sip_session_create_joint_call_stream(). * The endpoint "preferred_codec_only" option now automatically sets AST_SIP_CALL_CODEC_PREF_FIRST in incoming_call_offer_pref. * A helper function ast_stream_get_format_count() was added to streams to return the current count of formats. ASTERISK-28777 Change-Id: Id4ec0b4a906c2ae5885bf947f101c59059935437	6 years ago
Jaco Kroon	82c3939c38	res_rtp_asterisk: implement ACL mechanism for ICE and STUN addresses. ... A pure blacklist is not good enough, we need a whitelist mechanism as well, and the simplest way to do that is to re-use existing ACL infrastructure. This makes it simpler to blacklist say an entire block (/24) except a smaller block (eg, a /29 or even a /32). Normally you'd need to recursively split the block, so if you want to blacklist a /24 except for a /29 you'd end up with a blacklit for a /25, /26, /27 and /28. I feel that having an ACL instead of a blacklist only is clearer. Change-Id: Id57a8df51fcfd3bd85ea67c489c85c6c3ecd7b30 Signed-off-by: Jaco Kroon <jaco@uls.co.za>	6 years ago
Sean Bright	c4e0983742	func_odbc.conf.sample: Clarify sample documentation ... ASTERISK-20325 #close Change-Id: I06cb9b467b0fd06c8af2a5aee049f872c09cc4b6	6 years ago
George Joseph	99efe1f868	Merge "codec negotiation: add incoming_call_offer_prefs option"	6 years ago
Jared Smith	0a7fe3097f	indications.conf.sample: Add indication tones for Indonesia ... These tones come from http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf ASTERISK-23407 Change-Id: I48e2285f1e5bb29b3335f762006f66c423d0fcb8	6 years ago
Kevin Harwell	06dada3f01	codec negotiation: add incoming_call_offer_prefs option ... Add a new option, incoming_call_offer_pref, to res_pjsip endpoints that specifies the preferred order of codecs after receiving an offer. This patch does the following: Adds a new enumeration, ast_sip_call_codec_pref, used by the the new configuration option that's added to the endpoint media structure. Adds a new ast_sip_session_caps structure that's set for each session media object. Creates a new file, res_pjsip_session_caps that "implements" the new structure and option, and is compiled into the res_pjsip_session library. ASTERISK-28756 #close Change-Id: I35e7a2a0c236cfb6bd9cdf89539f57a1ffefc76f	6 years ago
Joshua Colp	67e4ec1a6c	Merge "chan_sip: Clarify in sample docs how directmediapermit/-acl should be used"	6 years ago
George Joseph	b76ab5e5c9	message.c: Add option to suppress the Message channel AMI and ARI events ... In order to reduce the amount of AMI and ARI events generated, the global "Message/ast_msg_queue" channel can be set to suppress it's normal channel housekeeping events such as "Newexten", "VarSet", etc. This can greatly reduce load on the manager and ARI applications when the Digium Phone Module for Asterisk is in use. To enable, set "hide_messaging_ami_events" in asterisk.conf to "yes" In Asterisk versions <18, the default is "no" preserving existing behavior. Beginning with Asterisk 18, the option will default to "yes". NOTE: This change does not affect UserEvents or the ARI TextMessageReceived events. * Added the "hide_messaging_ami_events" option to asterisk.conf. * Changed message.c to set the AST_CHAN_TP_INTERNAL property on the "Message/ast_msg_queue" channel if the option is set in asterisk.conf. This suppresses the reporting of the events. Change-Id: Ia2e3516d43f4e0df994fc6598565d6bba2d7018b	6 years ago
Walter Doekes	113d05e504	chan_sip: Clarify in sample docs how directmediapermit/-acl should be used ... It said "restrict [...] which peers should be able to pass [audio] to each other". However, these settings are not global (for which you would expect signaling IPs to be checked). These settings are available per peer only, and the IPs being checked, are the RTP IPs. Change-Id: I2a6c6cd7c2f5f30d1df4844e3e0308a077021660	6 years ago
Sean Bright	0dce6f746b	http: Add ability to disable /httpstatus URI ... Add a new configuration option 'enable_status' which allows the /httpstatus URI handler to be administratively disabled. We also no longer unconditionally register the /static and /httpstatus URI handlers, but instead do it based upon configuration. Behavior change: If enable_static was turned off, the URI handler was still installed but returned a 403 when it was accessed. Because we now register/unregister the URI handlers as appropriate, if the /static URI is disabled we will return a 404 instead. Additionally: * Change 'enablestatic' to 'enable_static' but keep the former for backwards compatibility. * Improve some internal variable names ASTERISK-28710 #close Change-Id: I647510f796473793b1d3ce1beb32659813be69e1	6 years ago
Sean Bright	262221f4d9	func_odbc.conf.sample: Add example lookup ... Change-Id: Ia05aab1f579597963d2ea23920d2210cfcb97c84	6 years ago
Sean Bright	312abaa1fe	res_pjsip_endpoint_identifier_ip.c: Add port matching support ... Adds source port matching support when IP matching is used: [example] type = identify match = 1.2.3.4:5060/32, 1.2.3.4:6000/32, asterisk.org:4444 If the IP matches but the source port does not, we reject and search for alternatives. SRV lookups are still performed if enabled (srv_lookups = yes), unless the configured FQDN includes a port number in which case just a host lookup is performed. ASTERISK-28639 #close Reported by: Mitch Claborn Change-Id: I256d5bd5d478b95f526e2f80ace31b690eebba92	6 years ago
Joshua C. Colp	89b7144fbd	confbridge: Add support for specifying maximum sample rate. ... ConfBridge has the ability to move between different sample rates for mixing the conference bridge. Up until now there has only been the ability to set the conference bridge to mix at a specific sample rate, or to let it move between sample rates as necessary. This change adds the ability to configure a conference bridge with a maximum sample rate so it can move between sample rates but only up to the configured maximum. ASTERISK-28658 Change-Id: Idff80896ccfb8a58a816e4ce9ac4ebde785963ee	6 years ago