3595 Commits (cea835e565ea690b99dfbc3240900a47694e186b)

Author	SHA1	Message	Date
zuul	09fcfb26fa	Merge "stream: Add media stream topology definition and API"	9 years ago
George Joseph	8b72ec312b	stream: Add media stream topology definition and API ... This change adds the media stream topology definition and API for accessing and using it. Some refactoring of the stream was also done. ASTERISK-26786 Change-Id: Ic930232d24d5ad66dcabc14e9b359e0ff8e7f568	9 years ago
zuul	f9f74f4b75	Merge "manager: Restore Originate failure behavior from Asterisk 11"	9 years ago
Sean Bright	0910773077	manager: Restore Originate failure behavior from Asterisk 11 ... In Asterisk 11, if the 'Originate' AMI command failed to connect the provided Channel while in extension mode, a 'failed' extension would be looked up and run. This was, I believe, unintentionally removed in 51b6c49. This patch restores that behavior. This also adds an enum for the various 'synchronous' modes in an attempt to make them meaningful. ASTERISK-26115 #close Reported by: Nasir Iqbal Change-Id: I8afbd06725e99610e02adb529137d4800c05345d	9 years ago
Joshua Colp	bab4885f1e	stream: Add media stream definition and API with unit tests. ... This change adds the media stream definition and API for accessing and using it. Unit tests have also been written which exercise aspects of the API. ASTERISK-26773 Change-Id: I3dbe54065b55aaa51f467e1a3bafd67fb48cac87	9 years ago
Richard Mudgett	97c308471d	res_agi: Prevent an AGI from eating frames it should not. (Re-do) ... A dialplan intercept routine is equivalent to an interrupt routine. As such, the routine must be done quickly and you do not have access to the media stream. These restrictions are necessary because the media stream is the responsibility of some other code and interfering with or delaying that processing is bad. A possible future dialplan processing architecture change may allow the interception routine to run in a different thread from the main thread handling the media and remove the execution time restriction. * Made res_agi.c:run_agi() running an AGI in an interception routine run in DeadAGI mode. No touchy channel frames. ASTERISK-25951 ASTERISK-26343 ASTERISK-26716 Change-Id: I638f147ca7a7f2590d7194a8ef4090eb191e4e43	10 years ago
Richard Mudgett	72e3fc5845	Frame deferral: Revert API refactoring. ... There are several issues with deferring frames that are caused by the refactoring. 1) The code deferring frames mishandles adding a deferred frame to the deferred queue. As a result the deferred queue can only be one frame long. 2) Deferrable frames can come directly from the channel driver as well as the read queue. These frames need to be added to the deferred queue. 3) Whoever is deferring frames is really only doing the __ast_read() to collect deferred frames and doesn't care about the returned frames except to detect a hangup event. When frame deferral is completed we must make the normal frame processing see the hangup as a frame anyway. As such, there is no need to have varying hangup frame deferral methods. We also need to be aware of the AST_SOFTHANGUP_ASYNCGOTO hangup that isn't real. That fake hangup is to cause the PBX thread to break out of loops to go execute a new dialplan location. 4) To properly deal with deferrable frames from the channel driver as pointed out by (2) above, means that it is possible to process a dialplan interception routine while frames are deferred because of the AST_CONTROL_READ_ACTION control frame. Deferring frames is not implemented as a re-entrant operation so you could have the unsupported case of two sections of code thinking they have control of the media stream. A worse problem is because of the bad implementation of the AMI PlayDTMF action. It can cause two threads to be deferring frames on the same channel at the same time. (ASTERISK_25940) * Rather than fix all these problems simply revert the API refactoring as there is going to be only autoservice and safe_sleep deferring frames anyway. ASTERISK-26343 ASTERISK-26716 #close Change-Id: I45069c779aa3a35b6c863f65245a6df2c7865496	10 years ago
George Joseph	6f645a6d4e	Merge "media: Add experimental support for RTCP feedback."	10 years ago
zuul	10631bb209	Merge "PJPROJECT logging: Fix detection of max supported log level."	10 years ago
George Joseph	0ad6d2b3cf	Merge "ari: Implement 'debug all' and request/response logging"	10 years ago
Richard Mudgett	36bdd7c1a0	Add notes about embedded ast_frame structs holding a format ref. ... mod_format.h: Note ast_filestream.fr holds a format ref. translate.h: Note ast_trans_pvt.f holds a format ref. Change-Id: I86bda354d725207b41e08920355d7c31b2d7f749	10 years ago
Richard Mudgett	6f3e8c8e01	PJPROJECT logging: Fix detection of max supported log level. ... The mechanism used for detecting the maximum log level compiled into the linked pjproject did not work. The API call simply stores the requested level into an integer and does no range checking. Asterisk was assuming that there was range checking and limited the new value to the allowable range. To get the actual maximum log level compiled into the linked pjproject we need to get and save off the initial set log level from pjproject. This is the maximum log level supported. * Get and save off the initial log level setting before altering it to the desired level on startup. This has to be done by a macro rather than calling a core function to avoid incorrectly linking pjproject. * Split the initial log level warning messages to warn if the linked pjproject cannot support the requested startup level and if it is too low to get the pjproject buildopts for "pjproject show buildopts". * Adjust the CLI "pjproject set log level" to check the saved max log level and to generate normal output messages instead of a warning message. ASTERISK-26743 #close Change-Id: I40aa76653e2a1dece66c3f8734594b4f0471cfb4	10 years ago
George Joseph	6691606723	ari: Implement 'debug all' and request/response logging ... The 'ari set debug' command has been enhanced to accept 'all' as an application name. This allows dumping of all apps even if an app hasn't registered yet. To accomplish this, a new global_debug global variable was added to res/stasis/app.c and new APIs were added to set and query the value. 'ari set debug' now displays requests and responses as well as events. This required refactoring the existing debug code. * The implementation for 'ari set debug' was moved from stasis/cli.{c,h} to ari/cli.{c,h}, and stasis/cli.{c,h} were deleted. * In order to print the body of incoming requests even if a request failed, the consumption of the body was moved from the ari stubs to ast_ari_callback in res_ari.c and the moustache templates were then regenerated. The body is now passed to ast_ari_invoke and then on to the handlers. This results in code savings since that template was inserted multiple times into all the stubs. An additional change was made to the ao2_str_container implementation to add partial key searching and a sort function. The existing cli code assumed it was already there when it wasn't so the tab completion was never working. Change-Id: Ief936f747ce47f1fb14035fbe61152cf766406bf (cherry picked from commit 1d890874f3)	10 years ago
Lorenzo Miniero	1061539b75	media: Add experimental support for RTCP feedback. ... This change adds experimental support for providing RTCP feedback information to codec modules so they can dynamically change themselves based on conditions. ASTERISK-26584 Change-Id: Ifd6aa77fb4a7ff546c6025900fc2baf332c31857	10 years ago
Kevin Harwell	283c16c6b6	abstract/fixed/adpative jitter buffer: disallow frame re-inserts ... It was possible for a frame to be re-inserted into a jitter buffer after it had been removed from it. A case when this happened was if a frame was read out of the jitterbuffer, passed to the translation core, and then multiple frames were returned from said translation core. Upon multiple frames being returned the first is passed on, but sebsequently "chained" frames are put back into the read queue. Thus it was possible for a frame to go back into the jitter buffer where this would cause problems. This patch adds a flag to frames that are inserted into the channel's read queue after translation. The abstract jitter buffer code then checks for this flag and ignores any frames marked as such. Change-Id: I276c44edc9dcff61e606242f71274265c7779587	10 years ago
Aaron An	e0e502d9d2	res_rtp_asterisk: Fix bug in function CHANNEL(rtcp, all_rtt) ... Function CHANNEL(rtcp,all_rtt) CHANNEL(rtcp,all_loss) CHANNEL(rtcp,all_jitter) always return 0.0 due to wrong define of macro "AST_RTP_SATA_SET" and "AST_RTP_STAT_STRCPY". It should compare "combined" with "stat" not "current_stat". ASTERISK-26710 #close Reported-by: Aaron An Tested-by: AaronAn Change-Id: Id4140fafbf92e2db689dac5b17d9caa009028a15	10 years ago
zuul	6962a13466	Merge "core/pbx: dialplan show - display filename/line#"	10 years ago
Jonathan R. Rose	d96e350256	core/pbx: dialplan show - display filename/line# ... Adds the ability for extensions to be registered to include filename and line number so that dialplan show output can show the filename and line number of a config file responsible for generating a given extension. This only affects config modules that are written to use the new extension registering functions. In this patch, that only includes pbx_config, so extensions registered in extensions.conf and any included extension will be shown in this manner. Extensions registered in this manner will show the filename and line number *instead* of the registrar. ASTERISK-26658 #close Reported by: Jonathan R. Rose Change-Id: Ieccc6abccdff34ed5c7da3511fd24972b8f2dd30	10 years ago
Richard Mudgett	44e72c9d44	MESSAGE: Flush Message/ast_msg_queue channel alert pipe. ... ASTERISK-25083 Change-Id: Id54baa57a8dbca84e29f28bcd2ffc0a5ac12d8b2	10 years ago
George Joseph	79b09b5f18	res_pjsip_registrar: AMI Add RegistrationInboundContactStatuses command ... The PJSIPShowRegistrationsInbound AMI command was just dumping out all AORs which was pretty useless and resource heavy since it had to get all endpoints, then all aors for each endpoint, then all contacts for each aor. PJSIPShowRegistrationInboundContactStatuses sends ContactStatusDetail events which meets the intended purpose of the other command and has significantly less overhead. Also, some additional fields that were added to Contact since the original creation of the ContactStatusDetail event have been added to the end of the event. For compatibility purposes, PJSIPShowRegistrationsInbound is left intact. ASTERISK-26644 #close Change-Id: I326f12c9ecb52bf37ba03f0748749de4da01490a	10 years ago
Joshua Colp	faf2194fab	Merge "app_originate: Add option to execute gosub prior to dial"	10 years ago
Joshua Colp	cd5d9d1d69	Merge "tcptls: Use new certificate upon sip reload"	10 years ago
Joshua Colp	197e408395	Merge "PJPROJECT logging: Made easier to get available logging levels."	10 years ago
Guido Falsi	75230f4c01	res_rtp: Fix regression when IPv6 is not available. ... The latest Release candidate fails to create RTP streams when IPv6 is not available. Due to the changes made in September the ast_sockaddr structure passed around to create these streams is always of AF_INET6 type, causing failure when used for IPv4. This patch adds a utility function to check for availability of IPv6 and applies such check at startup to determine how to create the ast_sockaddr structures. ASTERISK-26617 #close Change-Id: I627a4e91795e821111e1cda523f083a40d0e0c3e	10 years ago
Richard Mudgett	1dfa11b65c	PJPROJECT logging: Made easier to get available logging levels. ... Use of the new logging is as simple as issuing the new CLI command or setting the new pjproject.conf option. Other options that can affect the logging are how you have the pjproject log levels mapped to Asterisk log types in pjproject.conf and if you have configured Asterisk to log the DEBUG type messages. Altering the pjproject.conf level mapping shouldn't be necessary for most installations as the default mapping is sensible. Configuring Asterisk to log the DEBUG message type is standard practice for collecting debug information. * Added CLI "pjproject set log level" command to dynamically adjust the maximum pjproject log message level. * Added CLI "pjproject show log level" command to see the currently set maximum pjproject log message level. * Added pjproject.conf startup section "log_level" option to set the initial maximum pjproject log message level so all messages could be captured from initialization. * Set PJ_LOG_MAX_LEVEL to 6 to compile in all defined logging levels into bundled pjproject. Pjproject will use the currently set run time log level to determine if a log message is generated just like Asterisk verbose and debug logging levels. * In log_forwarder(), made always log enabled and mapped pjproject log messages. DEBUG mapped log messages are no longer gated by the current Asterisk debug logging level. * Removed RAII_VAR() from res_pjproject.c:get_log_level(). ASTERISK-26630 #close Change-Id: I6dca12979f482ffb0450aaf58db0fe0f6d2e5389	10 years ago
Alexei Gradinari	e5e887be53	chan_pjsip: fix switching sending codec when asymmetric_rtp_codec=no ... The sending codec is switched to the receiving codec and then is switched back to the best native codec on EVERY receiving RTP packets. This is because after call of ast_channel_set_rawwriteformat there is call of ast_set_write_format which calls set_format which sets rawwriteformat to the best native format. This patch adds a new function ast_set_write_format_path which set specific write path on channel and uses this function to switch the sending codec. ASTERISK-26603 #close Change-Id: I5b7d098f8b254ce8f45546e6c36e5d324737f71d	10 years ago
David Kerr	ddc951060a	app_originate: Add option to execute gosub prior to dial ... Issue/patch ASTERISK-26587 was inspired by issue ASTERISK-22992 that requested ability to add callerid into app_originate. Comments in that issue suggested that it was better solved by adding an option to gosub prior to originating the call. The attached patch implements this much like app_dial with two options one to gosub on the originating channel and one to gosub on the newly created channel and behaves just like app_dial. I have tested this patch by adding callerid info to the new channel and also SIPAddHeader (to e.g. add header to force auto answer) and confirmed it works. Have also tested both 'exten' and 'app' versions of app_originate. Opened by: dkerr Patch by: dkerr Change-Id: I36abc39b58567ffcab4a636ea196ef48be234c57	10 years ago
Joshua Colp	c9cc64b911	Merge "ast_format: Adds an identifier for interleaved audio formats to the ast_format"	10 years ago
Michael Kuron	635b0a0a55	tcptls: Use new certificate upon sip reload ... Previously, a TLS server socket would only be restarted upon sip reload if the bind address had changed. This commit adds checking for changes to TLS parameters like certificate, ciphers, etc. so they get picked up without requiring a reload of the entire chan_sip module. This does not affect open connections in any way, but new connections will use the new TLS parameters. The changes also apply to HTTP and Manager. ASTERISK-26604 #close Change-Id: I169e86cefc6dcd627c915134015a6a1ab1aadbe6	10 years ago
zuul	120a4999f0	Merge "Add support for building RADIUS with radcli"	10 years ago
Joshua Colp	98b3b500dc	Merge "manager: update minor version"	10 years ago
Joshua Colp	d3dba74017	Merge "Implement internal abstraction for iostreams"	10 years ago
Mark Michelson	d670ea6297	manager: update minor version ... Based on bridge video AMI event changes, bump the minor version of AMI. Change-Id: Idf84507354170400813cda780906c94c9f1b60b4	10 years ago
Joshua Colp	ed143a3b7c	Merge "res_pjsip_outbound_authenticator_digest.c: Fix memory pool leak."	10 years ago
George Joseph	97b2ba472d	Merge "channel: Fix issues in hangup scenarios caused by frame deferral"	10 years ago
George Joseph	ac0a1ee6da	Merge "Revert "Revert "Add API for channel frame deferral."""	10 years ago
zuul	d0474f6322	Merge "res/ari/resource_bridges: Add the ability to manipulate the video source"	10 years ago
Joshua Colp	1c26117dff	Merge "cli: Fix ast_el_read_char to work with libedit >= 3.1"	10 years ago
Richard Mudgett	0cd0e70c16	res_pjsip_outbound_authenticator_digest.c: Fix memory pool leak. ... Responding to authentication challenges leaks PJSIP memory pools. The leak was introduced with a pjproject 2.5.5 API change. https://trac.pjsip.org/repos/ticket/1929 changed the API usage of pjsip_auth_clt_init() to require the new API pjsip_auth_clt_deinit() to clean up cached authentication allocations that get allocated with pjsip_auth_clt_reinit_req(). ASTERISK-26516 #close Change-Id: I4473141b8c3961d0dc91c382beb3876b3efb45c8	10 years ago
Joshua Colp	6911f9891f	Merge "manager: Bump AMI version number."	10 years ago
Timo Teräs	070a51bf7c	Implement internal abstraction for iostreams ... fopencookie/funclose is a non-standard API and should not be used in portable software. Additionally, the way FILE's fd is used in non-blocking mode is undefined behaviour and cannot be relied on. This introduces internal abstraction for io streams, that allows implementing the desired virtualization of read/write operations with necessary timeout handling. ASTERISK-24515 #close ASTERISK-24517 #close Change-Id: Id916aef418b665ced6a7489aef74908b6e376e85	10 years ago
Joshua Colp	d3b61a98f4	manager: Bump AMI version number. ... During the development of Asterisk 14 the behavior of the Command AMI action was altered such that the result was returned on lines with a prefix of "Output: ". While this was documented in the UPGRADE.txt file it is also reasonable that this should bump the AMI version number. ASTERISK-26556 Change-Id: Idf1bf01608e53f7bfdf43ddb4d0683e53f74ee42	10 years ago
Matt Jordan	a72ef38113	res/ari/resource_bridges: Add the ability to manipulate the video source ... In multi-party bridges, Asterisk currently supports two video modes: * Follow the talker, in which the speaker with the most energy is shown to all participants but the speaker, and the speaker sees the previous video source * Explicitly set video sources, in which all participants see a locked video source Prior to this patch, ARI had no ability to manipulate the video source. This isn't important for two-party bridges, in which Asterisk merely relays the video between the participants. However, in a multi-party bridge, it can be advantageous to allow an external application to manipulate the video source. This patch provides two new routes to accomplish this: (1) setVideoSource: POST /bridges/{bridgeId}/videoSource/{channelId} Sets a video source to an explicit channel (2) clearVideoSource: DELETE /bridges/{bridgeId}/videoSource Removes any explicit video source, and sets the video mode to talk detection ASTERISK-26595 #close Change-Id: I98e455d5bffc08ea5e8d6b84ccaf063c714e6621	10 years ago
George Joseph	7263a17ca0	channel: Fix issues in hangup scenarios caused by frame deferral ... ASTERISK-26343 Change-Id: I06dbf7366e26028251964143454a77d017bb61c8 (cherry picked from commit 0be46aaf6b)	10 years ago
George Joseph	2966fa5ad7	Revert "Revert "Add API for channel frame deferral."" ... This reverts commit fa749866c1. Change-Id: Idcd1b88fa0766b1326dcc87d8905dbc314c71bd7	10 years ago
Sebastien Duthil	c6d755de11	res_ari: Add support for channel variables in ARI events. ... This works the same as for AMI manager variables. Set "channelvars=foo,bar" in your ari.conf general section, and then the channel variables "foo" and "bar" (along with their values), will appear in every Stasis websocket channel event. ASTERISK-26492 #close patches: ari_vars.diff submitted by Mark Michelson Change-Id: I5609ba239259577c0948645df776d7f3bc864229	10 years ago
George Joseph	72da2ef9ff	cli: Fix ast_el_read_char to work with libedit >= 3.1 ... Libedit 3.1 is not build with unicode on as a default and so the prototype for the el_gets callback changed from expecting a char buffer to accepting a wchar buffer. If ast_el_read_char isn't changed, the cli reads garbage from teh terminal. Added a configure test for (*el_rfunc_t)(EditLine *, wchar_t *) and updated ast_el_read_char to use the HAVE_ define to detemrine whether to use char or wchar. ASTERISK-26592 #close Change-Id: I9099b46f68e06d0202ff80e53022a2b68b08871a	10 years ago
Tzafrir Cohen	97a75e3829	Add support for building RADIUS with radcli ... Radcli is yet another RADIUS client library, generally compatible with freeradius and radiusclient-ng. This commit adds autoconf option for detecting it as well and changes cdr_radius and cel_radius to use its header file in that case. ASTERISK-26540 #close Change-Id: I271f0715406334874865ffbce0b354b3a2ca148f	10 years ago
George Joseph	fa749866c1	Revert "Add API for channel frame deferral." ... This reverts commit f073f648b8. Multiple testsuite failures were detected after the fact. Change-Id: I968c380418bf65c7166f6ecff30fe8e247ea6682	10 years ago
Mark Michelson	f073f648b8	Add API for channel frame deferral. ... There are several places in Asterisk that have duplicated logic for deferring important frames until later. This commit adds a couple of API calls to facilitate this automatically. ast_channel_start_defer_frames(): Future reads of deferrable frames on this channel will be deferred until later. ast_channel_stop_defer_frames(): Any frames that have been deferred get requeued onto the channel. ASTERISK-26343 Change-Id: I3e1b87bc6796f222442fa6f7d1b6a4706fb33641	10 years ago