asterisk

Commit Graph

Author	SHA1	Message	Date
Mark Michelson	1712694817	Fix a crash that would occur when receiving a 491 response to a reinvite. The reviewboard description does a fine job of summarizing this, so here it is: A reporter discovered that Asterisk would crash when attempting to retransmit a reinvite that had previously received a 491 response. The crash occurred because a pjsip_tx_data structure was being saved for reuse, but its reference count was not being increased. The result was that the pjsip_tx_data was being freed before we were actually done with it. When we attempted to re-use the structure when re-sending the reinvite, Asterisk would crash. The fix implemented here is not to try holding onto the pjsip_tx_data at all. Instead, when we reschedule sending the reinvite, we create a brand new pjsip_tx_data and send that instead. Because of this change, there is no need for an ast_sip_session_delayed_request structure to have a pjsip_tx_data on it any more. So any code referencing its use has been removed. When this initial fix was introduced, I encountered a second crash when processing a subsequent 200 OK on a rescheduled reinvite. The reason was that when rescheduling the reinvite, we gave the wrong location for a response callback. This has been fixed in this patch as well. ASTERISK-24556 #close Reported by Abhay Gupta Review: https://reviewboard.asterisk.org/r/4233 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429089 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Mark Michelson	93b1df3bf6	Add new AMI and ARI events for connected line changes on a channel. The AMI event is called NewConnectedLine and the ARI event is called ChannelConnectedLine. ASTERISK-24554 #close Reported by Matt Jordan Review: https://reviewboard.asterisk.org/r/4231 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429064 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kinsey Moore	55c9a46abd	Stasis: Fix StasisStart/End order and missing events This corrects several bugs that currently exist in the stasis application code. * After a masquerade, the resulting channels have channel topics that do not match their uniqueids ** Masquerades now swap channel topics appropriately * StasisStart and StasisEnd messages are leaked to observer applications due to being published on channel topics ** StasisStart and StasisEnd publishing is now properly restricted to controlling apps via app topics * Race conditions exist where StasisStart and StasisEnd messages due to a masquerade may be received out of order due to being published on different topics ** These messages are now published directly on the app topic so this is now a non-issue * StasisEnds are sometimes missing when sent due to masquerades and bridge swaps into and out of Stasis() This was due to StasisEnd processing adjusting message-sent flags after Stasis() had already exited and Stasis() had been re-entered This was corrected by adjusting these flags prior to sending the message while the initial Stasis() application was still shutting down Review: https://reviewboard.asterisk.org/r/4213/ ASTERISK-24537 #close Reported by: Matt DiMeo ........ Merged revisions 429061 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429062 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	7fd1227202	res/res_monitor: Reset in/out sample counts on Monitor start When repeatedly starting/stopping a Monitor on a channel, the accumulated in/out sample counts are never reset to 0. This can cause inadvertent jumps in the recordings, as the code in the channel core will determine incorrectly that a jump in the recorded file position should occur. Setting the sample counts to 0 simply reflects the initial state a Monitor should be in when it is started, as this is the initial count that would be on the channels at that time. ASTERISK-24573 #close Reported by: Nuno Borges patches: 24573.patch uploaded by Nuno Borges (License 6116) ........ Merged revisions 429031 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 429032 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429033 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	a551851e5b	res_pjsip_refer: Fix issue where native bridge may not occur upon completion of a transfer. There are two methods within res_pjsip_refer for keeping track of the state of a transfer. The first is a framehook which looks at frames passing by to determine the state. The second subscribes to know when the channel joins a bridge. In the case when the channel joins the bridge the framehook is NOT removed and this prevents the native RTP bridging technology from getting used. This change gets the channel and if it still exists remove the framehook. Review: https://reviewboard.asterisk.org/r/4218/ ........ Merged revisions 428760 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@428761 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
George Joseph	7472c661ca	res_pjsip_endpoint_identifier_ip: Add 'show identify(ies)' cli commands While troubleshooting other things I realized there were no pjsip cli commands for identify. This patch adds them. It also also fixes a reference leak when a 'show endpoint' displayed identifies and properly sets the return code if load_module can't allocate a cli formatter structure. Tested-by: George Joseph Review: https://reviewboard.asterisk.org/r/4212/ ........ Merged revisions 428725 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@428731 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	d79c68d3fb	main/stasis: Allow subscriptions to use a threadpool for message delivery Prior to this patch, all Stasis subscriptions would receive a dedicated thread for servicing published messages. In contrast, prior to r400178 (see review https://reviewboard.asterisk.org/r/2881/), the subscriptions shared a thread pool. It was discovered during some initial work on Stasis that, for a low subscription count with high message throughput, the threadpool was not as performant as simply having a dedicated thread per subscriber. For situations where a subscriber receives a substantial number of messages and is always present, the model of having a dedicated thread per subscriber makes sense. While we still have plenty of subscriptions that would follow this model, e.g., AMI, CDRs, CEL, etc., there are plenty that also fall into the following two categories: * Large number of subscriptions, specifically those tied to endpoints/peers. * Low number of messages. Some subscriptions exist specifically to coordinate a single message - the subscription is created, a message is published, the delivery is synchronized, and the subscription is destroyed. In both of the latter two cases, creating a dedicated thread is wasteful (and in the case of a large number of peers/endpoints, harmful). In those cases, having shared delivery threads is far more performant. This patch adds the ability of a subscriber to Stasis to choose whether or not their messages are dispatched on a dedicated thread or on a threadpool. The threadpool is configurable through stasis.conf. Review: https://reviewboard.asterisk.org/r/4193 ASTERISK-24533 #close Reported by: xrobau Tested by: xrobau ........ Merged revisions 428681 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@428687 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
George Joseph	2846d23688	sorcery: Make is_object_field_registered handle field names that are regexes. As a result of https://reviewboard.asterisk.org/r/3305, res_sorcery_realtime was tossing database fields that didn't have an exact match to a sorcery registered field. This broke the ability to use regexes as field names which manifested itself as a failure of res_pjsip_phoneprov_provider which uses this capability. It also broke handling of fields that start with '@' in realtime but I don't think anyone noticed. This patch does the following... * Modifies ast_sorcery_fields_register to pre-compile the name regex. * Modifies ast_sorcery_is_object_field_registered to test the regex if it exists instead of doing an exact strcmp. * Modifies res_pjsip_phoneprov_provider with a few tweaks to get it to work with realtime. Tested-by: George Joseph Review: https://reviewboard.asterisk.org/r/4185/ ........ Merged revisions 428543 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@428544 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Jonathan Rose	ddc3f4846f	PJSIP ACLs: Fix ACLs not loading on startup and apply/acl issues on contact The biggest problem this patch fixes is that ACLs weren't previously being loaded when the res_pjsip_acl module was loaded. Yikes. In addition, the ACL options contact_permit and contact_acl were effectively interpreted as contact_deny and this patch fixes that as well. AST-1418 #close Reported by: Thomas Thompson Review: https://reviewboard.asterisk.org/r/4120/ ASTERISK-24531 #close Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/4171/ ........ Merged revisions 428333 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@428343 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	e7f16827cb	AST-2014-016: Fix crash when receiving an in-dialog INVITE with Replaces in res_pjsip_refer. The implementation of INVITE with Replaces in res_pjsip_refer did not expect them to occur in-dialog. As a result it would incorrectly attempt to hang up a channel it thought was under its control. In reality the channel would be under the control of another thread. When the other thread accessed the channel it would be accessing freed memory and could crash. This change makes res_pjsip_refer not act on an in-dialog INVITE with Replaces. ASTERISK-24528 #close Reported by: Joshua Colp ........ Merged revisions 428304 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@428305 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	524588c345	ast_str: Fix improper member access to struct ast_str members. Accessing members of struct ast_str outside of the string manipulation API routines is invalid since struct ast_str is supposed to be treated as opaque. Review: https://reviewboard.asterisk.org/r/4194/ ........ Merged revisions 428244 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 428245 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@428246 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	a0d9eab389	res_pjsip_sdp_rtp: Add support for optimistic SRTP. Optimistic SRTP is the ability to enable SRTP but not have it be a fatal requirement. If SRTP can be used it will be, if not it won't be. This gives you a better chance of using it without having your sessions fail when it can't be. Encrypt all the things! Review: https://reviewboard.asterisk.org/r/3992/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@428222 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	87c2e9e238	res_pjsip_refer: Ensure Refer-To is NULL terminated and parse it as a URI. There is no guarantee that when we get a Refer-To that it will be NULL terminated. As the URI parsing function requires it to be we now NULL terminate it. Additionally parsing the Refer-To as a 'To' header is needless and it can simply be done as a URI. This also fixes a problem where certain Refer-To headers would not be parsed as a 'To' header causing the REFER to fail. ASTERISK-24508 #close Reported by: Beppo Mazzucato Review: https://reviewboard.asterisk.org/r/4187/ ........ Merged revisions 428195 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@428196 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	8648bc1f6f	parking_tests.c: Add missing newline on a unit test message. ........ Merged revisions 428168 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@428169 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	cbba061f13	res_pjsip: Enforce requirements for session timer minimum expiration period and normal expiration period. This change enforces the requirements in PJSIP for session timer configuration. The minimum expiration period must be 90 seconds or higher and the normal expiration period can not be lower than the minimum expiration period. If either of these were done the code would assert at session setup time. ASTERISK-24336 #close Reported by: Leon Rowland ........ Merged revisions 427978 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@427979 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Mark Michelson	1536b0ecb6	Fix race condition that could result in ARI transfer messages not being sent. From reviewboard: "During blind transfer testing, it was noticed that tests were failing occasionally because the ARI blind transfer event was not being sent. After investigating, I detected a race condition in the blind transfer code. When blind transferring a single channel, the actual transfer operation (i.e. removing the transferee from the bridge and directing them to the proper dialplan location) is queued onto the transferee bridge channel. After queuing the transfer operation, the blind transfer Stasis message is published. At the time of publication, snapshots of the channels and bridge involved are created. The ARI subscriber to the blind transfer Stasis message then attempts to determine if the bridge or any of the involved channels are subscribed to by ARI applications. If so, then the blind transfer message is sent to the applications. The way that the ARI blind transfer message handler works is to first see if the transferer channel is subscribed to. If not, then iterate over all the channel IDs in the bridge snapshot and determine if any of those are subscribed to. In the test we were running, the lone transferee channel was subscribed to, so an ARI event should have been sent to our application. Occasionally, though, the bridge snapshot did not have any channels IDs on it at all. Why? The problem is that since the blind transfer operation is handled by a separate thread, it is possible that the transfer will have completed and the channels removed from the bridge before we publish the blind transfer Stasis message. Since the blind transfer has completed, the bridge on which the transfer occurred no longer has any channels on it, so the resulting bridge snapshot has no channels on it. Through investigation of the code, I found that attended transfers can have this issue too for the case where a transferee is transferred to an application." The fix employed here is to decouple the creation of snapshots for the transfer messages from the publication of the transfer messages. This way, snapshots can be created to reflect what they are at the time of the transfer operation. Review: https://reviewboard.asterisk.org/r/4135 ........ Merged revisions 427848 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@427870 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Mark Michelson	77c57f2b1a	Fix race condition where duplicated requests may be handled by multiple threads. This is the Asterisk 13 version of the patch. The main difference is in the pubsub code since it was completely refactored between Asterisk 12 and 13. Review: https://reviewboard.asterisk.org/r/4175 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@427841 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kevin Harwell	721ae89155	res_pjsip_exten_state: PJSIPShowSubscriptionsInbound causes crash When using a non-default sorcery wizard (in this instance realtime) for outbound registrations and after adding in an appropriate call to ast_sorcery_apply_config() (since it is missing) Asterisk will crash after a stack overflow occurs due to the code infinitely recursing. The fix entails removing the outbound registration state dependency from the outbound registration sorcery object and instead keeping an in memory container that can be used to lookup the state when needed. ASTERISK-24514 Reported by: Mark Michelson Review: https://reviewboard.asterisk.org/r/4164/ ........ Merged revisions 427814 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@427815 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kinsey Moore	5013659972	Stasis: Fix StasisEnd message ordering This change corrects message ordering in cases where a channel-related message can be received after a Stasis/ARI application has received the StasisEnd message. The StasisEnd message was being passed to applications directly without waiting for the channel topic to empty. As a result of this fix, other bugs were also identified and fixed: * StasisStart messages were also being sent directly to apps and are now routed through the stasis message bus properly * Masquerade monitor datastores were being removed at the incorrect time in some cases and were causing StasisEnd messages to not be sent * General refactoring where necessary for the above * Unsubscription on StasisEnd timing changes to prevent additional messages from following the StasisEnd when they shouldn't A channel sanitization function pointer was added to reduce processing and AO2 lookups. Review: https://reviewboard.asterisk.org/r/4163/ ASTERISK-24501 #close Reported by: Matt Jordan ........ Merged revisions 427788 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@427789 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	248c592292	res_pjsip: Ensure in-dialog responses have an endpoint associated. When handling incoming messages we determine if it is associated with a dialog. If so we use that to determine what serializer and endpoint to use for the message. Previously this would pass the endpoint to the endpoint lookup module to actually place the endpoint completely on the message. For in-dialog responses, however, this did not occur as dialog processing took over and the endpoint lookup did not occur. This change just places the endpoint in the expected spot immediately instead of relying on the endpoint lookup module. In-dialog responses thus have the expected endpoint. AST-1459 #close Review: https://reviewboard.asterisk.org/r/4146/ ........ Merged revisions 427490 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@427491 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Corey Farrell	1c255e711e	res_hep: fix major leak that occurs when config is missing or enabled=no. Add missing unreference in hepv3_send_packet. ASTERISK-24491 #close Reported by: Zane Conkle Tested by: Zane Conkle Review: https://reviewboard.asterisk.org/r/4150/ ........ Merged revisions 427400 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@427405 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Mark Michelson	27dc7e47d7	Make the disable_tcp_switch PJSIP system object enabled by default. Testing has shown repeatedly that PJSIP's default behavior of switching automatically to TCP for large messages can cause issues. The most common issues are that devices that we are communicating with do not handle the switch to TCP gracefully, thus causing situations such as broken calls or broken subscriptions. Now, in order to have this behavior happen, you must opt into it. The sample file has been updated to warn that enabling the TCP switch behavior may cause issues for you, so use at your own risk. git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@427334 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	0d0131bf34	res_pjsip_multihomed: Add logging during startup to aid debugging if local DNS is misbehaving. This change adds a bit of logging so if the local DNS is misbehaving it is easier to track down what is going on and where Asterisk may be hanging. ASTERISK-24438 #close Reported by: Melissa Shepherd Review: https://reviewboard.asterisk.org/r/4148/ ........ Merged revisions 427300 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@427303 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Corey Farrell	3e29fa3686	res_http_websockets: Fix extra unref of module In websocket_add_protocol_internal is used to add the "echo" protocol, but ast_websocket_remove_protocol is used to remove it. This causes an extra call to ast_module_unref. ASTERISK-24480 #close Reported by: Corey Farrell Review: https://reviewboard.asterisk.org/r/4140/ ........ Merged revisions 427200 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@427201 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	b586e7f0b2	res_pjsip: Add disable_tcp_switch option. When a packet exceeds the MTU, pjproject will switch from UDP to TCP. In some circumstances (on some networks), this can cause some issues with messages not getting sent to the correct destination - and can also cause connections to get dropped due to quirks in pjproject deciding to terminate TCP connections with no messages. While fixing the routing/messaging issues is important, having a configuration option in Asterisk that tells pjproject to not switch over to TCP would be useful. That way, if some glitch is discovered on some other network/site, we can at least disable the behavior until a fix is put into place. AFS-197 #close Review: https://reviewboard.asterisk.org/r/4137/ ........ Merged revisions 427129 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@427130 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	d5309929be	res/res_stasis: Fix crash on module unload while performing operation When the res_stasis module is unloaded, it will dispose of the apps_registry container. This is a problem if an ARI operation is in flight that attempts to use the registry, as the shutdown occurs in a separate thread. This patch adds some sanity checks to the various routines that access the registry which cause the operations to fail if the apps_registry does not exist. Crash caught by the Asterisk Test Suite. ........ Merged revisions 426995 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@426996 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Scott Griepentrog	b3b93a7c15	pjsip: clarify tls cert and key file usage A question arose as to whether a .pem file could be provided in place of the .crt and .key files in a PJSIP TLS configuration. I tested this and discovered that although a cert will be read from the pem file, a key will not, and thus the priv_key_file entry is still required. This update to the fine documentation clarifies the option usage. AST-1448 #close Review: https://reviewboard.asterisk.org/r/4129/ Reported by: John Bigelow ........ Merged revisions 426928 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@426930 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Scott Griepentrog	b4ee155c62	pjsip: Handle outbound unregister correctly This updates the status of the outbound registration to reflect when it has been unregistered. Since the registration is unregistered but is not stopped, the registration schedule remains active as before. The patch also updates the documentation of both the AMI and CLI commands. ASTERISK-24411 #close Review: https://reviewboard.asterisk.org/r/4119/ Reported by: John Bigelow patches: unregister-patch1.txt uploaded by John Bigelow (License 5091) ........ Merged revisions 426923 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@426924 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kevin Harwell	c3b1d0df0d	res_pjsip_exten_state: PJSIPShowSubscriptionsInbound causes crash Currently, it is possible for some subscriptions to get into a NULL state. When this occurs and the PJSIPShowSubscriptionsInbound ami action is issued and a device is subscribed for extension state then the associated subscription state object can't be located. The code then attempts to dereference a NULL object. Added a NULL check to avoid the problem. Reported by: John Bigelow ........ Merged revisions 426779 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@426780 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kevin Harwell	fed9d0deb0	res_pjsip: incorrect qualify statistics after disabling for contact When removing the qualify_frequency from an AoR or a contact the statistics shown when issuing "pjsip show aors" from the CLI are incorrect. This patch deletes the contact's status object from sorcery, disassociating it from the contact, if the qualify_freqency is removed from configuration. ASTERISK-24462 #close Reported by: Mark Michelson Review: https://reviewboard.asterisk.org/r/4116/ ........ Merged revisions 426755 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@426757 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Corey Farrell	0ca681a414	res_fax: Resolve T38 gateway frame leak. When frames are translated by a fax gateway they need to be freed. The existing call to ast_frfree was unreachable. This change reorganizes fax_gateway_framehook to ensure that ast_frfree is called when needed. ASTERISK-24457 #close Reported by: Corey Farrell Review: https://reviewboard.asterisk.org/r/4115/ ........ Merged revisions 426527 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 426528 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@426529 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Malcolm Davenport	0bbb351655	ASTERISK-24323, fix bug in documentation of AGI STREAM FILE CONTROL git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@426362 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	b23580afe6	res/res_http_websocket: Fix minor nits found by wdoekes on r409681 When Moises committed the fixes for WSS (which was a great patch), wdoekes had a few style nits that were on the review that got missed. This patch resolves what I think were all of the ones that were still on the review. Thanks to both moy for the patch, and wdoekes for the reviews. Review: https://reviewboard.asterisk.org/r/3248/ ........ Merged revisions 426209 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 426210 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@426211 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	f3fbcc550e	res/res_phoneprov: Fix crash on shutdown caused by container cleanup In res_phoneprov, unloading the module first destroys the http_routes container, followed by the users. However, users may have a route in the http_routes container; the validity of this container is not checked in the users destructor. Hence, we hit an assert as the container has already been set to NULL. This patch does two things: (1) It adds a sanity check in the user destructor (because why not) (2) It switches the order of destruction, so that users are disposed of prior to the HTTP routes they may hold a reference to. Note that this crash was caught by the Test Suite (go go testing!) ........ Merged revisions 426174 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@426176 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	775640f658	res/res_srtp: Fix include issue for libsrtp 1.5.0 In libsrtp 1.5.0, crypto_get_random is no longer resolved simply by including srtp.h. Now, one must include crypto_kernel.h as well. As it turns out, this header file has been provided by the library since 2006, so this is a relatively benign change. ASTERISK-24436 #close Reported by: Patrick Laimbock ........ Merged revisions 426140 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 426141 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 426142 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@426143 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	0e911663e3	AST-2014-011: Fix POODLE security issues There are two aspects to the vulnerability: (1) res_jabber/res_xmpp use SSLv3 only. This patch updates the module to use TLSv1+. At this time, it does not refactor res_jabber/res_xmpp to use the TCP/TLS core, which should be done as an improvement at a latter date. (2) The TCP/TLS core, when tlsclientmethod/sslclientmethod is left unspecified, will default to the OpenSSL SSLv23_method. This method allows for all encryption methods, including SSLv2/SSLv3. A MITM can exploit this by forcing a fallback to SSLv3, which leaves the server vulnerable to POODLE. This patch adds WARNINGS if a user uses SSLv2/SSLv3 in their configuration, and explicitly disables SSLv2/SSLv3 if using SSLv23_method. For TLS clients, Asterisk will default to TLSv1+ and WARN if SSLv2 or SSLv3 is explicitly chosen. For TLS servers, Asterisk will no longer support SSLv2 or SSLv3. Much thanks to abelbeck for reporting the vulnerability and providing a patch for the res_jabber/res_xmpp modules. Review: https://reviewboard.asterisk.org/r/4096/ ASTERISK-24425 #close Reported by: abelbeck Tested by: abelbeck, opsmonitor, gtjoseph patches: asterisk-1.8-jabber-tls.patch uploaded by abelbeck (License 5903) asterisk-11-jabber-xmpp-tls.patch uploaded by abelbeck (License 5903) AST-2014-011-1.8.diff uploaded by mjordan (License 6283) AST-2014-011-11.diff uploaded by mjordan (License 6283) ........ Merged revisions 425987 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@425991 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	70b21c4617	res/res_pjsip_sdp_rtp: Revert 425922 This patch for r425922 introduced a bug, wherein sending an INVITE request with no SDP would cause Asterisk to not send an SDP Offer in the 200 OK. The current structure of res_pjsip_sdp_rtp is a bit hard to deal with to fix this, as create_outgoing_sdp has no knowledge of whether or not it is creating an SDP as a new Offer or an Answer. This is something of an oversight in the callback definition, as the caller of it does have this information. git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@425944 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	2c7556769c	res/res_pjsip_sdp_rtp: Remove left over reference to override_prefs The usage of the local override_prefs variable in create_outgoing_sdp_stream was previously to track an override format preference set by PJSIP_MEDIA_OFFER. Now, however, that function simply sets the joint capabilities structure, session->req_caps. During the media format rework, the override_prefs was instead used to check if there were any formats in session->req_caps. However, this usage isn't useful in create_outgoing_sdp_stream. session->req_caps contains the negotiated formats for all streams, not just the current one being created. Thus, so long as any stream of any type has provided a format, override_prefs will be non-zero. Hence, its usage in checking whether or not we should look at the formats on the endpoint or the joint capabilities is generally useless. There's only two things useful to check: (1) Does the endpoint have a format for the media type? (2) Did we negotiate a format for the media type? If either of those is a 'no', then we must kill the media stream. git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@425923 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	dd7031bfb7	res_pjsip_session/res_pjsip_sdp_rtp: Be more tolerant of offers When an inbound SDP offer is received, Asterisk currently makes a few incorrection assumptions: (1) If the offer contains more than a single audio/video stream, Asterisk will reject the entire stream with a 488. This is an overly strict response; generally, Asterisk should accept the media streams that it can accept and decline the others. (2) If the offer contains a declined media stream, Asterisk will attempt to process it anyway. This can result in attempting to match format capabilities on a declined media stream, leading to a 488. Asterisk should simply ignore declined media streams. (3) Asterisk will currently attempt to handle offers with AVPF with use_avpf=No/AVP with use_avpf=Yes. This mismatch results in invalid SDP answers being sent in response. If there is a mismatch between the media type being offered and the configuration, Asterisk must reject the offer with a 488. This patch does the following: * Asterisk will accept SDP offers with at least one media stream that it can use. Some WARNING messages have been dropped to NOTICEs as a result. * Asterisk will not accept an offer with a media type that doesn't match its configuration. * Asterisk will ignore declined media streams properly. #SIPit31 Review: https://reviewboard.asterisk.org/r/4063/ ASTERISK-24122 #close Reported by: James Van Vleet ASTERISK-24381 #close Reported by: Matt Jordan ........ Merged revisions 425868 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@425879 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kinsey Moore	289830cdc6	PJSIP: Enforce module load dependencies This enforces that res_pjsip, res_pjsip_session, and res_pjsip_pubsub have loaded properly before attempting to load any modules that depend on them since the module loader system is not currently capable of resolving module dependencies on its own. ASTERISK-24312 #close Reported by: Dafi Ni Review: https://reviewboard.asterisk.org/r/4062/ ........ Merged revisions 425690 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@425691 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	70a3e74f0a	res_rtp_asterisk: Fix a bug where ICE state would get reset when it shouldn't. In the case where the ICE negotiation had not yet started current state would get wiped when it shouldn't. This also removes channel binding as in practice this does not work well with other implementations. ........ Merged revisions 425644 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 425645 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@425646 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Jonathan Rose	fab0df2f4c	parking_tests: Fix assertions and possibly crashes in res_parking unit tests Assertions were caused by attempting to play music on hold to a channel with no formats. Parking unit test channels were given formats and a technology so that they would be able to pretend to read/write frames. ASTERISK-24413 #close Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/4075/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@425611 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
George Joseph	26724c65f7	res_phoneprov: Create accessor for ast_phoneprov_std_variable_lookup Based on feedback from Richard, I created an accessor for res_phoneprov/ast_phoneprov_std_variable_lookup and added load priority to AST_MODULE_INFO. Tested-by: George Joseph Tested-by: Richard Mudgett Review: https://reviewboard.asterisk.org/r/4076/ ........ Merged revisions 425480 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@425481 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Corey Farrell	c0943cf8d6	res_fax: Fix reference leak caused by gateway sessions Fax gateway session objects can be re-used, causing the same gateway session to be added to faxregistry.container more than once. This change causes fax_session_new to remove the reserved session from the container before it's id is changed, ensuring it's possible for the session to be freed. ASTERISK-24392 #close Reported by: Corey Farrell Review: https://reviewboard.asterisk.org/r/4049/ ........ Merged revisions 425457 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 425458 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@425459 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Corey Farrell	6b93ab5824	res_fax: Resolve module reference leak caused by reserved sessions Remove reference to module providing reserved session after adding a reference to the final module. This re-reference is done to ensure that module references are correct even if the final session selects a different module than the reserved session. ASTERISK-18923 #close Reported by: Grigoriy Puzankin Review: https://reviewboard.asterisk.org/r/4048/ ........ Merged revisions 425405 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 425407 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 425411 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@425415 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
George Joseph	8bb06d592a	manager/config: Support templates and non-unique category names via AMI This patch provides the capability to manipulate templates and categories with non-unique names via AMI. Summary of changes: GetConfig and GetConfigJSON: Added "Filter" parameter: A comma separated list of name_regex=value_regex expressions which will cause only categories whose variables match all expressions to be considered. The special variable name TEMPLATES can be used to control whether templates are included. Passing 'include' as the value will include templates along with normal categories. Passing 'restrict' as the value will restrict the operation to ONLY templates. Not specifying a TEMPLATES expression results in the current default behavior which is to not include templates. UpdateConfig: NewCat now includes options for allowing duplicate category names, indicating if the category should be created as a template, and specifying templates the category should inherit from. The rest of the actions now accept a filter string as defined above. If there are non-unique category names, you can now update specific ones based on variable values. To facilitate the new capabilities in manager, corresponding changes had to be made to config, most notably the addition of filter criteria to many of the APIs. In some cases it was easy to change the references to use the new prototype but others would have required touching too many files for this patch so a wrapper with the original prototype was created. Macros couldn't be used in this case because it would break binary compatibility with modules such as res_digium_phone that are linked to real symbols. Tested-by: George Joseph Review: https://reviewboard.asterisk.org/r/4033/ ........ Merged revisions 425383 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@425384 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	efefbe15a4	res_rtp_asterisk: Make the ICE transport check case insensitive as some implementations use 'udp'. ........ Merged revisions 425360 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 425361 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@425362 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Walter Doekes	1e6c3d1a26	res_calendar_ews: Relax neon version check to work with 0.30 too. Allow res_calendar_ews to work not only with libneon-0.29 but also with 0.30. ASTERISK-24325 #close Reported by: Tzafrir Cohen Review: https://reviewboard.asterisk.org/r/4068/ ........ Merged revisions 425286 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 425287 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 425288 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@425289 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
George Joseph	004c387041	res_phoneprov: Cleanup module load error handling Tested module load/reload interaction between res_phoneprov and res_pjsip_phoneprov_provider in cases where res_phoneprov didn't load correctly (usually misconfiguration or missing phoneprov.conf) Tested-by: George Joseph Review: https://reviewboard.asterisk.org/r/4069/ ........ Merged revisions 425264 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@425265 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	b8aed5b14d	res/res_phoneprov: Bail on registration if res_phoneprov didn't load If res_phoneprov failed to fully load (due to not being configured), the providers container will be NULL. If a module attempts to register a phone provisioning provider, it should check for the presence of the container. If there is no providers container, it should return an error. This patch makes the ast_phoneprov_provider_register function do that... otherwise this would be a silly commit message. ........ Merged revisions 425220 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@425221 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago

1 2 3 4 5 ...

2742 Commits (cbc91f50c1bd1ebeb62bcfc174fd8b1538dd67f7)