Asterisk does not need the development package of libltdl, because it does not
use any symbol of -lltdl directly. Instead, it uses the runtime package via the
shared library -lodbc. On the supported platforms, that shared library declares
its dependency on -lltdl correctly, otherwise AST_EXT_LIB_CHECK would have
failed.
ASTERISK-27745
Change-Id: Icd315809b8e7978203431f3afb66240dd3a040ba
* acl (named_acl.c)
* cdr
* cel
* ccss
* dnsmgr
* dsp
* enum
* extconfig (config.c)
* features
* http
* indications
* logger
* manager
* plc
* sounds
* udptl
These modules are now loaded at appropriate time by the module loader.
Unlike loadable modules these use AST_MODULE_LOAD_FAILURE on error so
the module loader will abort startup on failure of these modules.
Some of these modules are still initialized or shutdown from outside the
module loader. logger.c is initialized very early and shutdown very
late, manager.c is initialized by the module loader but is shutdown by
the Asterisk core (too much uses it without holding references).
Change-Id: I371a9a45064f20026c492623ea8062d02a1ab97f
GCC documentation states that when __attribute__((malloc)) is used it
should not return storage which contains any valid pointers. It
specifically mentions that realloc functions should not have the malloc
attribute, but this also means that complex initializers which could
contain initialized pointers should not use this attribute.
Change-Id: If507f33ffb3ca3b83b702196eb0e8215d27fc7d2
When built-in components of Asterisk fail to start they cause the
Asterisk startup to abort. In these cases only the most critical
cleanup should be performed - closing databases and terminating
proceses. These cleanups are registered using ast_register_atexit, all
other cleanups should not be run during startup abort.
The main reason for this change is that these cleanup procedures are
untestable from the partially initialized states, if they fail it could
prevent us from ever running the critical cleanup with ast_run_atexits.
Create separate initialization for dns_core.c to be run unconditionally
during startup instead of being initialized by the first dns resolver to
be registered. This ensures that 'sched' is initialized before it can be
potentially used.
Replace ast_register_atexit with ast_register_cleanup in media_cache.c.
There is no reason for this cleanup to happen unconditionally.
Change-Id: Iecc2df98008b21509925ff16740bd5fa29527db3
In NetBSD, PortAudio 1 is still the default version. PortAudio 2 can be
installed side by side but gets placed in a 'portaudio2' subdirectory. To
find PortAudio 2 even in a subdirectory, the tool pkg-config is queried via
AST_PKG_CONFIG_CHECK. For those platforms, which do not list PowerAudio 2
via pkg-config, the previous check remains and is executed thereafter.
ASTERISK-27721
Change-Id: I4175500126909ad1b181fff8e11bb4a3a6ae4fa9
astosp.h is leftover from when logic was split between app_osplookup and
res_osp. All logic was moved into app_osplookup by 109737eb1c in 2006,
but astosp.h remained. This moves the remaining defines into
app_osplookup and deletes astosp.h.
Change-Id: I0a6c4debd7c9543b608520b1765abfa4fab7b2fd
This allows asterisk to be compiled with MALLOC_DEBUG to load modules
built without MALLOC_DEBUG. Now pre-compiled third-party modules will
still work regardless of MALLOC_DEBUG being enabled or not.
Change-Id: Ic07ad80b2c2df894db984cf27b16a69383ce0e10
The pool cache gets in the way of finding use after free errors of memory
pool contents. Tools like valgrind and MALLOC_DEBUG don't know when a
pool is released because it gets put into the cache instead of being
freed.
* Added the "cache_pools" option to pjproject.conf. Disabling the option
helps track down pool content mismanagement when using valgrind or
MALLOC_DEBUG. The cache gets in the way of determining if the pool
contents are used after free and who freed it.
To disable the pool caching simply disable the cache_pools option in
pjproject.conf and restart Asterisk.
Sample pjproject.conf setting:
[startup]
cache_pools=no
* Made current users of the caching pool factory initialization and
destruction calls call common routines to create and destroy cached pools.
ASTERISK-27704
Change-Id: I64d5befbaeed2532f93aa027a51eb52347d2b828
A couple of additional properties are needed in rtp_engine to enable
support for packet retransmission: AST_RTP_PROPERTY_RETRANS_RECV and
AST_RTP_PROPERTY_RETRANS_SEND. These will both be enabled automatically
if an endpoint has the webrtc option enabled. While this adds no
functionality currently, it will serve as a building block for future
changes for RTP retransmission support.
For more information, refer to the wiki page:
https://wiki.asterisk.org/wiki/display/AST/WebRTC+User+Experience+Improvements
Change-Id: Ic598acd042a045f9d10e5bdccb66f4efc9e587cc
The dsp_talking_threshold does not represent time in milliseconds. It
represents the average magnitude per sample in the audio packets. This is
what the DSP uses to determine if a packet is silence or talking/noise.
Change-Id: If6f939c100eb92a5ac6c21236559018eeaf58443
Create ast_atomic macro's to provide a consistent interface to the
common functionality of __atomic and __sync built-in functions.
ASTERISK-27619
Change-Id: Ieba3f81832a0e25c5725ea067e5d6f742d33eb5b
In an earlier release, inbound registrations on a reliable transport
were pruned on Asterisk restart since the TCP connection would have
been torn down and become unusable when Asterisk stopped. This same
process is now also applied to inbound subscriptions.
Also fixed issues in res_pjsip_registrar where it wasn't handling the
monitoring correctly when multiple registrations came in over the same
transport.
To accomplish this, the pjsip_transport_event feature needed to
be refactored to allow multiple monitors (multiple subcriptions or
registrations from the same endpoint) to exist on the same transport.
Since this changed the API, any external modules that may have used the
transport monitor feature (highly unlikey) will need to be changed.
ASTERISK-27612
Reported by: Ross Beer
Change-Id: Iee87cf4eb9b7b2b93d5739a72af52d6ca8fbbe36
This addresses all performance issues with 'module load' completion. In
addition to using ast_cli_completion_add we stop using libedit's
filename_completion_function, instead using ast_file_read_dir. This
ensures all results are produced from a single call to opendir.
Change-Id: I8bf51ffaa7ef1606f3bd1b5bb13f1905d72c6134
Because of a copy-and-paste error, the Asterisk project was using __typeof
instead of typeof. It works because typeof, __typeof, and __typeof__ are
supported by GCC, but here the escaped variant was not intended. Therefore,
for consistence, we change this to typeof.
Change-Id: I2a962c3e596e882f691a19345445b14571a5f07c
This change causes the configure script to throw an error if neither
__sync nor __atomic builtin functions are available.
ASTERISK-27619
Change-Id: Ie01a281e0f5c41dfeeb5f250c1ccea8752f56ef9
Add a check to configure.ac for __atomic_fetch_add support. If found
use the __atomic built-in operators for ast_atomic_dec_and_test and
ast_atomic_fetchadd_int.
ASTERISK~27619
Change-Id: I65b4feb02bae368904ed0fb03f585c05f50a690e
This removes references that are no longer needed due to automatic
references created by module dependencies.
In addition this removes most calls to ast_module_check as they were
checking modules which are listed as dependencies.
Change-Id: I332a6e8383d4c72c8e89d988a184ab8320c4872e
* Copy more than one character at a time when there is nothing to
substitute.
* Fix off by one error if a '}' or ']' is missing.
* Eliminated the requirement that the "used" parameter had to point to a
variable. The current callers were always declaring a variable to meet
the requirement and discarding the value put into that variable. Now it
can be NULL.
* In ast_str_substitute_variables_full() fixed using the bogus channel to
evaluate a function. We were not using the bogus channel we just created
to help evaluate a subexpression.
Change-Id: Ia83d99f4f16abe47f329eb39b6ff2013ae7c9854
The type=identify endpoint identification method can match by IP address
and by SIP header. However, the SIP header matching has limited
usefulness because you cannot specify the SIP header matching priority
relative to the IP address matching. All the matching happens at the same
priority and the order of evaluating the identify sections is
indeterminate. e.g., If you had two type=identify sections where one
matches by IP address for endpoint alice and the other matches by SIP
header for endpoint bob then you couldn't predict which endpoint is
matched when a request comes in that matches both.
* Extract the SIP header matching criteria into its own "header" endpoint
identification method so the user can specify the relative priority of the
SIP header and the IP address matching criteria in the global
endpoint_identifier_order option. The "ip" endpoint identification method
now only matches by IP address.
ASTERISK-27491
Change-Id: I9df142a575b7e1e3471b7cda5d3ea156cef08095
* Declare 'requires' and 'enhances' text fields on module info structure.
* Rename 'nonoptreq' to 'optional_modules'.
* Update doxygen comments.
Still need to investigate dependencies among modules I cannot compile.
Change-Id: I3ad9547a0a6442409ff4e352a6d897bef2cc04bf
ast_vector_string_split:
This function will add items to an ast_vector_string by splitting values
of a string buffer. Items are appended to the vector in the order they
are found.
ast_vector_const_string:
A vector of 'const char *'.
Change-Id: I1bf02a1efeb2baeea11c59c557d39dd1197494d7
This function returns NULL if the module in question is not running. I
did not change ast_module_ref as most callers do not check the result
and they always call ast_module_unref.
Make use of this function when running registered items from:
* app_stack API's
* bridge technologies
* CLI commands
* File formats
* Manager Actions
* RTP engines
* Sorcery Wizards
* Timing Interfaces
* Translators
* AGI Commands
* Fax Technologies
ASTERISK-20346 #close
Change-Id: Ia16fd28e188b2fc0b9d18b8a5d9cacc31df73fcc
Add a reference to the calling module when it is active to protect
access to datastore->info. Remove module references done by
func_periodic_hook as the datastore now handles it.
ASTERISK-25128 #close
Change-Id: I8357a3711e77591d0d1dd8ab4211a7eedd782c89
This is the old ASTOBJ macro's which are no longer used except by the
deprecated netsock.c. Move it to the chan_iax2 include folder so it
does not get used elsewhere.
Change-Id: I7e4ae96678b36b9f41d3cae14b167f110eb5d349
Fix instances of:
* Retreive
* Recieve
* other then
* different then
* Repeated words ("the the", "an an", "and and", etc).
* othterwise, teh
ASTERISK-24198 #close
Change-Id: I3809a9c113b92fd9d0d9f9bac98e9c66dc8b2d31
Joshua Colp
Jenkins2
Alexander Traud
Corey Farrell
Richard Mudgett
Ben Ford
George Joseph
Sean Bright