In review 4843 (ASTERISK-24858), we added a hack that forced a smoother
creation when sending signed linear so that the byte order was adjusted
during transmission. This was needed because smoother flags were lost
during the new format work that was done in Asterisk 13.
Rather than rolling that same hack into res_rtp_multicast, re-introduce
smoother flags so that formats can dictate their own options.
Change-Id: I77b835fba0e539c6ce50014a984766f63cab2c16
A previous commit added plumbing to bridge_softmix to allow for an SFU
experience with Asterisk. This commit adds an option to app_confbridge
that allows for a confbridge to actually make use of the SFU video mode.
SFU mode is implemented in a "set it and forget it" kind of way. That
is, when the bridge is created, if SFU mode is enabled, then the video
mode gets set to SFU and cannot be changed. Future improvements may
allow for a hybrid experience (e.g. forward multiple video streams,
specifically those of the most recent talkers), but for this addition,
no such capability is present.
Change-Id: I87bbcb63dec6dbbb42488f894871b86f112b2020
This sets up the "plumbing" in bridge_softmix to
be able to accommodate Asterisk asking as an SFU
(selective forwarding unit) for conferences.
The way this works is that whenever a channel enters or leaves a
conference, all participants in the bridge get sent a stream topology
change request. The topologies consist of the channels' original
topology, along with video destination streams corresponding to each
participants' source video streams. So for instance, if Alice, Bob, and
Carol are in the conference, and each supplies one video stream, then
the topologies for each would look like so:
Alice:
Audio,
Source video(Alice),
Destination Video(Bob),
Destination video (Carol)
Bob:
Audio,
Source video(Bob)
Destination Video(Alice),
Destination video (Carol)
Carol:
Audio,
Source video(Carol)
Destination Video(Alice),
Destination video (Bob)
This way, video that arrives from a source video stream can then be
copied out to the destination video streams on the other participants'
channels.
Once the bridge gets told that a topology on a channel has changed, the
bridge constructs a map in order to get the video frames routed to the
proper destination streams. This is done using the bridge channel's
stream_map.
This change is bare-bones with regards to SFU support. Some key features
are missing at this point:
* Stream limits. This commit makes no effort to limit the number of
streams on a specific channel. This means that if there were 50 video
callers in a conference, bridge_softmix will happily send out topology
change requests to every channel in the bridge, requesting 50+
streams.
* Configuration. The plumbing has been added to bridge_softmix, but
there has been nothing added as of yet to app_confbridge to enable SFU
video mode.
* Testing. Some functions included here have unit tests.
However, the functionality as a whole has only been verified by
hand-tracing the code.
* Selectivenss. For a "selective" forwarding unit, this does not
currently have any means of being selective.
* Features. Presumably, someone might wish to only receive video from
specific sources. There are no external-facing functions at the moment
that allow for users to select who they receive video from.
* Efficiency. The current scheme treats all video streams as being
unidirectional. We could be re-using a source video stream as a
desetnation, too. But to simplify things on this first round, I did it
this way.
Change-Id: I7c44a829cc63acf8b596a337b2dc3c13898a6c4d
...that can only be run by explicitly calling it with
'test execute category /DO_NOT_RUN/ name RAISE_SEGV'
This allows us to more easily test CI and debugging tools that
should do certain things when asterisk coredumps.
To allow this a new member was added to the ast_test_info
structure named 'explicit_only'. If set by a test, the test
will be skipped during a 'test execute all' or
'test execute category ...'.
Change-Id: Ia3a11856aae4887df9a02b6b081cc777b36eb6ed
Added functions that convert a string to an unsigned integer or unsigned long.
A couple of unit test were also created to test the routines. The reasons for
adding these conversion utilities (and hopefully eventually more) are as
follows:
* Conversion routines are functionally contained with consistent and
better error checking
* The function names offer a better description of what is happening
* It encourages code reuse for easier bug fixing at a single source
* It's simpler to use
* It's unit testable
For instance, currently in a lot of places when converting to an integer or
similar the "sscanf" function is used. When using "sscanf" it may not be
immediately clear what's happening as it lacks semantic naming. Limited error
checking is usually done as well. For example, most of the time a check is done
to make sure the value converted, but does not check for overflows or negative
valued conversions when converting unsigned numbers.
Why use/wrap "strtoul" and not "sscanf" then? Primarily, it lacks some of the
built in error handling that "strtoul" has. For instance "strtoul" contains
overflow checks. Less so, but can still factor as reasons, "sscanf" is slightly
more complex in its use. And maybe a bit controversial, but it may be ("big if")
potentially slower than "strtoul" in some cases.
Change-Id: If7eaca4a48f8c7b89cc8b5a1f4bed2852fca82bb
When manipulating flags on a channel the channel has to be
locked to guarantee that nothing else is also manipulating
the flags. This change introduces locking where necessary to
guarantee this. It also adds helper functions that manipulate
channel flags and lock to reduce repeated code.
ASTERISK-26789
Change-Id: I489280662dba0f4c50981bfc5b5a7073fef2db10
* changes:
SDP: Make process possible multiple fmtp attributes per rtpmap.
SDP: Explicitly stop a RTP instance before destoying it.
SDP: Rework merge_capabilities().
SDP: Update ast_get_topology_from_sdp() to keep RTP map.
This option was added to turn off notifying the progress details
on Blind Transfer. If this option is not set then the chan_pjsip
will send NOTIFY "200 OK" immediately after "202 Accepted".
Some SIP phones like Mitel/Aastra or Snom keep the line busy until
receive "200 OK".
ASTERISK-26333 #close
Change-Id: Id606fbff2e02e967c02138457badc399144720f2
When we optionally set the interface_address we are forcing the media to
go out a specific interface address. This allows us to optionally have
the media go out the interface that SIP signalling came in on or if we are
configured to have the media always go out a specific address.
Change-Id: I160d9fac322a075bd2557b430632544178196189
* Made sdp_add_m_from_rtp_stream() and sdp_add_m_from_udptl_stream()
handle generating disabled/declined streams.
* Added /main/sdp/sdp_merge_asymmetric unit test. It currently does not
check the offerer side negotiated SDP because that isn't the purpose of
this patch and there is much to be done to handle declined/dummy streams.
* Added T.38 image streams to the /main/sdp/sdp_merge_symmetric and
/main/sdp/sdp_merge_crisscross unit tests.
Change-Id: Ib4dcb3ca4f9a9133b376f4e3302f9a1f963f2b31
All log messages go to a queue serviced by a single thread
which does all the IO. This setting controls how big that
queue can get (and therefore how much memory is allocated)
before new messages are discarded. The default is 1000.
Should something go bezerk and log tons of messages in a tight
loop, this will prevent memory escalation.
When the limit is reached, a WARNING is logged to that effect
and messages are discarded until the queue is empty again. At
that time another WARNING will be logged with the count of
discarded messages. There's no "low water mark" for this queue
because the logger thread empties the entire queue and processes it
in 1 batch before going back and waiting on the queue again.
Implementing a low water mark would mean additional locking as
the thread processes each message and it's not worth it.
A "test" was added to test_logger.c but since the outcome is
non-deterministic, it's really just a cli command, not a unit
test.
Change-Id: Ib4520c95e1ca5325dbf584c7989ce391649836d1
ast_stream_clone() cannot copy the opaque user data stored on a stream.
We don't know how to clone the data so it isn't copied into the clone.
Change-Id: Ia51321bf38ecbfdcc53787ca77ea5fd2cabdf367
When using the Bridge AMI action on the same channel multiple times
it was possible for the channel to return to the wrong location in
the dialplan if the other party hung up. This happened because the
priority of the channel was not preserved across each action
invocation and it would fail to move on to the next priority in
other cases.
This change makes it so that the priority of a channel is preserved
when taking control of it from another thread and it is incremented
as appropriate such that the priority reflects where the channel
should next be executed in the dialplan, not where it may or may not
currently be.
The Bridge AMI action was also changed to ensure that it too
starts the channels at the next location in the dialplan.
ASTERISK-24529
Change-Id: I52406669cf64208aef7252a65b63ade31fbf7a5a
This patch is the first cut at adding stream support to the bridging framework.
Changes were made to the framework that allows mapping of stream topologies to
a bridge's supported media types.
The first channel to enter a bridge initially defines the media types for a
bridge (i.e. a one to one mapping is created between the bridge and the first
channel). Subsequently added channels merge their media types into the bridge's
adding to it when necessary. This allows channels with different sized
topologies to map correctly to each other according to media type. The bridge
drops any frame that does not have a matching index into a given write stream.
For now though, bridge_simple will align its two channels according to size or
first to join. Once both channels join the bridge the one with the most streams
will indicate to the other channel to update its streams to be the same as that
of the other. If both channels have the same number of streams then the first
channel to join is chosen as the stream base.
A topology change source was also added to a channel when a stream toplogy
change request is made. This allows subsystems to know whether or not they
initiated a change request. Thus avoiding potential recursive situations.
ASTERISK-26966 #close
Change-Id: I1eb5987921dd80c3cdcf52accc136393ca2d4163
The telephone_event option was used as a flag and a bit mapped value in
different places when it is a boolean. It is also inadequate to configure
the DTMF operation of the RTP instance created for the stream.
Change-Id: Ib1addeaf0ce86f07039f2f979cab29405dc5239b
RFC 5576 defines how SSRC-level attributes may be added to SDP media
descriptions. In general, this is useful for grouping related SSRCes,
indicating SSRC-level format attributes, and resolving collisions in RTP
SSRC values. These attributes are used widely by browsers during WebRTC
communications, including attributes defined by documents outside of RFC
5576.
This commit introduces the addition of SSRC-level attributes into SDPs
generated by Asterisk. Since Asterisk does not tend to use multiple
SSRCs on a media stream, the initial support is minimal. Asterisk
includes an SSRC-level CNAME attribute if configured to do so. This at
least gives browsers (and possibly others) the ability to resolve SSRC
collisions at offer-answer time.
In order to facilitate this, the RTP engine API has been enhanced to be
able to retrieve the SSRC and CNAME on a given RTP instance.
res_rtp_asterisk currently does not provide meaningful CNAME values in
its RTCP SDES items, and therefore it currently will always return an
empty string as the CNAME value. A task in the near future will result
in res_rtp_asterisk generating more meaningful CNAMEs.
Change-Id: I29e7f23e7db77524f82a3b6e8531b1195ff57789
If you use ast_request to create a PJSIP channel but then hang it
up without causing a transaction to be sent, the session will
never be destroyed. This is due ot the fact that it's pjproject
that triggers the session cleanup when the transaction ends.
app_chanisavail was doing this to get more granular channel state
and it's also possible for this to happen via ARI.
* ast_sip_session_terminate was modified to explicitly call the
cleanup tasks and unreference session if the invite state is NULL
AND invite_tsx is NULL (meaning we never sent a transaction).
* chan_pjsip/hangup was modified to bump session before it calls
ast_sip_session_terminate to insure that session stays valid
while it does its own cleanup.
* Added test events to session_destructor for a future testsuite
test.
ASTERISK-26908 #close
Reported-by: Richard Mudgett
Change-Id: I52daf6f757184e5544c261f64f6fe9602c4680a9
This change extends the ast_request functionality by adding another
function and callback to create an outgoing channel with a requested
stream topology. Fallback is provided by either converting the
requested stream topology into a format capabilities structure if
the channel driver does not support streams or by converting the
requested format capabilities into a stream topology if the channel
driver does support streams.
The Dial application has also been updated to request an outgoing
channel with the stream topology of the calling channel.
ASTERISK-26959
Change-Id: Ifa9037a672ac21d42dd7125aa09816dc879a70e6
Added an pre-defined integer vector declaration. This makes integer vectors
easier to declare and pass around. Also, added the ability to default a vector
up to a given size with a default value. Lastly, added functionality that
returns the "nth" index of a matching value.
Also, updated a unit test to test these changes.
Change-Id: Iaf4b51b2540eda57cb43f67aa59cf1d96cdbcaa5
This change adds a T.38 format which can be used in a stream
topology to specify that a UDPTL stream needs to be created.
The SDP API has been changed to understand T.38 and create
the UDPTL session, add the attributes, and parse the attributes.
This change does not change the boundary of the T.38 state
machine. It is still up to the channel driver to implement and
act on it (such as queueing control frames or reacting to them).
ASTERISK-26949
Change-Id: If28956762ccb8ead562ac6c03d162d3d6014f2c7
The gist of this work ensures that when a remote SDP is received, it is
merged properly with the local capabilities. The remote SDP is converted
into a stream topology. That topology is then merged with the current
local topology on the SDP state. That new merged topology is then used
to create an SDP. Finally, adjustments are made to RTP instances based
on knowledge gained from the remote SDP.
There are also a battery of tests in this commit that ensure that some
basic SDP merges work as expected.
While this may not sound like a big change, it has the property that it
caused lots of ancillary changes.
* The remote SDP is no longer stored on the SDP state. Biggest reason:
there's no need for it. The remote SDP is used at the time it is being
set and nowhere else.
* Some new SDP APIs were added in order to find attributes and convert
generic SDP attributes into rtpmap structures.
* Writing tests made me realize that retrieving a value from an SDP
options structure, the SDP options needs to be made const.
* The SDP state machine was essentially gutted by a previous commit.
Initially, I attempted to reinstate it, but I found that as it had
been defined, it was not all that useful. What was more useful was
knowing the role we play in SDP negotiation, so the SDP state machine
has been transformed into an indicator of role.
* Rather than storing separate local and joint stream state
capabilities, it makes more sense to keep track of current stream
state and update it as things change.
Change-Id: I5938c2be3c6f0a003aa88a39a59e0880f8b2df3d
The primary win of switching to eventfd when possible is that it only
uses a single file descriptor while pipe() will use two. This means for
each bridge channel we're reducing the number of required file
descriptors by 1, and - if you're using timerfd - we also now have 1
less file descriptor per Asterisk channel.
The API is not ideal (passing int arrays), but this is the cleanest
approach I could come up with to maintain API/ABI.
I've also removed what I believe to be an erroneous code block that
checked the non-blocking flag on the pipe ends for each read. If the
file descriptor is 'losing' its non-blocking mode, it is because of a
bug somewhere else in our code.
In my testing I haven't seen any measurable difference in performance.
Change-Id: Iff0fb1573e7f7a187d5211ddc60aa8f3da3edb1d
This saves around 100 bytes when G.711, G.722, G.729, and GSM are advertised in
SDP. This reduces the chance to hit the MTU bearer of 1300 bytes for SIP over
UDP, if many codecs are allowed in Asterisk. This new feature is enabled
together with the optional feature compact_headers=yes via the file pjsip.conf.
ASTERISK-26932 #close
Change-Id: Iaa556ab4c8325cd34c334387ab2847fab07b1689
In all non-pbx modules, AST_MODULE_LOAD_FAILURE has been changed
to AST_MODULE_LOAD_DECLINE. This prevents asterisk from exiting
if a module can't be loaded. If the user wishes to retain the
FAILURE behavior for a specific module, they can use the "require"
or "preload-require" keyword in modules.conf.
A new API was added to logger: ast_is_logger_initialized(). This
allows asterisk.c/check_init() to print to the error log once the
logger subsystem is ready instead of just to stdout. If something
does fail before the logger is initialized, we now print to stderr
instead of stdout.
Change-Id: I5f4b50623d9b5a6cb7c5624a8c5c1274c13b2b25
On 2's compliment machines abs(INT_MIN) behavior is undefined and
results in a negative value still being returnd. This results in
negative hash codes that can result in crashes.
ASTERISK-26528 #close
Change-Id: Idff550145ca2133792a61a2e212b4a3e82c6517b
0035-r5572-svn-backport-dialog-transaction-deadlock.patch
0036-r5573-svn-backport-ua-pjsua-transaction-deadlock.patch
0037-r5576-svn-backport-session-timer-crash.patch
Also removed the progress bar from wget download to stdout.
ASTERISK-26905 #close
Reported-by: Ross Beer
Change-Id: I268fb3cf71a3bb24283ff0d24bd8b03239d81256
* Report failures if configure finds a required header is missing.
* Deduplicate includes between asterisk.h, astmm.h and compat.h.
* Unconditionally include headers in compat.h if required elsewhere.
Change-Id: Ie67d0185ca71fbfb81c9bdfaebe46a49e3c56dc5
The ast_json structure is used in many Asterisk headers and is often the
only part of json.h used. This adds a forward declaration to asterisk.h
and removes the include of json.h from many headers. The declaration
has been left in endpoints.h and stasis.h to avoid problems with source
files that use ast_json functions without directly including json.h.
ari.h continues to include json.h as it uses enum
ast_json_encoding_format.
Change-Id: Id766aabce6bed56626d27e8d29f559b5e687b769
This change cleans up state management for media streams by moving
RTP instances into their own session structure and adding additional
details that are not relevant to the core (such as connection address).
These can live either in the local capabilities or joint capabilities.
The ability to set explicit connection address information for
the purposes of direct media and NAT has also been added at the
global and stream specific level.
ASTERISK-26900
Change-Id: If7e5307239a9534420732de11c451a2705b6b681
The ao2_global_obj_release() function holds an exclusive lock on the
global object while it is being dereferenced. Any destructors that
run during this time that call ao2_global_obj_ref() will deadlock
because a read lock is required.
Instead, we make the global object inaccessible inside of the write
lock and only dereference it once we have released the lock. This
allows the affected destructors to fail gracefully.
While this doesn't completely solve the referenced issue (the error
message about not being able to create an IQ continues to be shown)
it does solve the backtrace spew that accompanied it.
ASTERISK-21009 #close
Reported by: Marcello Ceschia
Change-Id: Idf40ae136b5070dba22cb576ea8414fbc9939385
This change removes the old epoll support which has not been used or
maintained in quite some time.
The fixed number of file descriptors on a channel has also been removed.
File descriptors are now contained in a growable vector. This can be
used like before by specifying a specific position to store a file
descriptor at or using a new API call, ast_channel_fd_add, which adds
a file descriptor to the channel and returns its position.
Tests have been added which cover the growing behavior of the vector
and the new API call.
ASTERISK-26885
Change-Id: I1a754b506c009b83dfdeeb08c2d2815db30ef928
Updated the AMI version for the following reason (see CHANGES for more details):
The 'PJSIPShowEndpoint' command's response event of 'IdentifyDetail' now
contains a new optional parameter, 'MatchHeader'.
Change-Id: Ie206913ef1dcfa6a2ebe3282da2387e52d6f05b9
Dynamic payload types were statically defined in Asterisk. This unfortunately
limited the number of dynamic payloads that could be registered. With this patch
dynamic payload type numbers are now assigned dynamically and per RTP instance.
However, in order to limit any issues where some clients expect the old
statically defined value this patch makes it so the value Asterisk used to pre-
designate is used for the dynamic assignment if available.
An option, "rtp_use_dynamic", has also been added (can be set in asterisk.conf)
that turns the new dynamic behavior on or off. When off it reverts back to using
statically defined payload values. This option defaults to "yes" in Asterisk 15.
ASTERISK-26515 #close
patches:
ASTERISK-26515.diff submitted by jcolp (license 5000
Change-Id: I7653465c5ebeaf968f1a1cc8f3f4f5c4321da7fc
Support for RFC3578 overlap dialling (i.e. 484 Response to partially matched
destinations) as currently provided by chan_sip is missing from res_pjsip.
This patch adds a new endpoint attribute (allow_overlap) [defaults to yes]
which when set to yes enables 484 responses to partial destination
matches rather than the current 404.
ASTERISK-26864
Change-Id: Iea444da3ee7c7d4f1fde1d01d138a3d7b0fe40f6
Rather than hard-coding UDP, allow consumers of the HEP API to specify
which protocol is in use. Update the PJSIP provider to pass in the
current protocol type.
ASTERISK-26850 #close
Change-Id: I54bbb0a001cfe4c6a87ad4b6f2014af233349978
POSIX does not require getprotobyname() to be thread safe and some
implementations use static memory which causes issues when multiple
threads are used.
Further, our usage of it today is just to ultimately get IPPROTO_TCP
for calls to setsockopt(). So instead we just use IPPROTO_TCP directly.
Change-Id: I2e14e58674808f7ce99b2f5e900d0f90d0d8da48
A new transport parameter 'symmetric_transport' has been added.
When a request from a dynamic contact comes in on a transport with
this option set to 'yes', the transport name will be saved and used
for subsequent outgoing requests like OPTIONS, NOTIFY and INVITE.
It's saved as a contact uri parameter named 'x-ast-txp' and will
display with the contact uri in CLI, AMI, and ARI output. On the
outgoing request, if a transport wasn't explicitly set on the
endpoint AND the request URI is not a hostname, the saved transport
will be used and the 'x-ast-txp' parameter stripped from the
outgoing packet.
* config_transport was modified to accept and store the new parameter.
* config_transport/transport_apply was updated to store the transport
name in the pjsip_transport->info field using the pjsip_transport->pool
on UDP transports.
* A 'multihomed_on_rx_message' function was added to
pjsip_message_ip_updater that, for incoming requests, retrieves the
transport name from pjsip_transport->info and retrieves the transport.
If transport->symmetric_transport is set, an 'x-ast-txp' uri parameter
containing the transport name is added to the incoming Contact header.
* An 'ast_sip_get_transport_name' function was added to res_pjsip.
It takes an ast_sip_endpoint and a pjsip_sip_uri and returns a
transport name if endpoint->transport is set or if there's an
'x-ast-txp' parameter on the uri and the uri host is an ipv4 or
ipv6 address. Otherwise it returns NULL.
* An 'ast_sip_dlg_set_transport' function was added to res_pjsip
which takes an ast_sip_endpoint, a pjsip_dialog, and an optional
pjsip_tpselector. It calls ast_sip_get_transport_name() and if
a non-NULL is returned, sets the selector and sets the transport
on the dialog. If a selector was passed in, it's updated.
* res_pjsip/ast_sip_create_dialog_uac and ast_sip_create_dialog_uas
were modified to call ast_sip_dlg_set_transport() instead of their
original logic.
* res_pjsip/create_out_of_dialog_request was modified to call
ast_sip_get_transport_name() and pjsip_tx_data_set_transport()
instead of its original logic.
* Existing transport logic was removed from endpt_send_request
since that can only be called after a create_out_of_dialog_request.
* res_pjsip/ast_sip_create_rdata was converted to a wrapper around
a new 'ast_sip_create_rdata_with_contact' function which allows
a contact_uri to be specified in addition to the existing
parameters. (See below)
* res_pjsip_pubsub/internal_pjsip_evsub_send_request was eliminated
since all it did was transport selection and that is now done in
ast_sip_create_dialog_uac and ast_sip_create_dialog_uas.
* 'contact_uri' was added to subscription_persistence. This was
necessary because although the parsed rdata contact header has the
x-ast-txp parameter added (if appropriate),
subscription_persistence_update stores the raw packet which
doesn't have it. subscription_persistence_recreate was then
updated to call ast_sip_create_rdata_with_contact with the
persisted contact_uri so the recreated subscription has the
correct transport info to send the NOTIFYs.
* res_pjsip_session/internal_pjsip_inv_send_msg was eliminated since
all it did was transport selection and that is now done in
ast_sip_create_dialog_uac.
* pjsip_message_ip_updater/multihomed_on_tx_message was updated
to remove all traces of the x-ast-txp parameter from the
outgoing headers.
NOTE: This change does NOT modify the behavior of permanent
contacts specified on an aor. To do so would require that the
permanent contact's contact uri be updated with the x-ast-txp
parameter and the aor sorcery object updated. If we need to
persue this, we need to think about cloning permanent contacts into
the same store as the dynamic ones on an aor load so they can be
updated without disturbing the originally configured value.
You CAN add the x-ast-txp parameter to a permanent contact's uri
but it would be much simpler to just set endpoint->transport.
Change-Id: I4ee1f51473da32ca54b877cd158523efcef9655f
Dereferencing struct ast_autochan.chan without first calling
ast_autochan_channel_lock() is unsafe because the pointer could change at
any time due to a masquerade. Unfortunately, ast_autochan_channel_lock()
itself uses struct ast_autochan.chan unsafely and can result in a deadlock
if the original channel happens to get destroyed after a masquerade in
addition to the pointer getting changed.
The problem is more likely to happen with v11 and earlier because
masquerades are used to optimize out local channels on those versions.
However, it could still happen on newer versions if the channel is
executing a dialplan application when the channel is transferred or
redirected. In this situation a masquerade still must be used.
* Added a lock to struct ast_autochan to safely be able to use
ast_autochan.chan while trying to get the channel lock in
ast_autochan_channel_lock(). The locking order is the channel lock then
the autochan lock. Locking in the other direction requires deadlock
avoidance.
* Fix unsafe ast_autochan.chan usages in app_mixmonitor.c.
* Fix unsafe ast_autochan.chan usages in app_chanspy.c.
* app_chanspy.c: Removed unused autochan parameter from next_channel().
ASTERISK-26867
Change-Id: Id29dd22bc0f369b44e23ca423d2f3657187cc592
This commit adds support for RFC 5761: Multiplexing RTP Data and Control
Packets on a Single Port. Specifically, it enables the feature when
using chan_pjsip.
A new option, "rtcp_mux" has been added to endpoint configuration in
pjsip.conf. If set, then Asterisk will attempt to use rtcp-mux with
whatever it communicates with. Asterisk follows the rules set forth in
RFC 5761 with regards to falling back to standard RTCP behavior if the
far end does not indicate support for rtcp-mux.
The lion's share of the changes in this commit are in
res_rtp_asterisk.c. This is because it was pretty much hard wired to
have an RTP and an RTCP transport. The strategy used here is that when
rtcp-mux is enabled, the current RTCP transport and its trappings (such
as DTLS SSL session) are freed, and the RTCP session instead just
mooches off the RTP session. This leads to a lot of specialized if
statements throughout.
ASTERISK-26732 #close
Reported by Dan Jenkins
Change-Id: If46a93ba1282418d2803e3fd7869374da8b77ab5
* Added additional fields to ast_sdp_options.
* Re-organized ast_sdp.
* Updated field names to correspond to RFC4566 terminology.
* Created allocs/frees for SDP children.
* Created getters/setters for SDP children where appropriate.
* Added ast_sdp_create_from_state.
* Refactored res_sdp_translator_pjmedia for changes.
Change-Id: Iefbd877af7f5a4d3c74deead1bff8802661b0d48
This change adds a few things to facilitate stream topology changing:
1. Control frame types have been added for use by the channel driver
to notify the application that the channel wants to change the stream
topology or that a stream topology change has been accepted. They are
also used by the indicate interface to the channel that the application
uses to indicate it wants to do the same.
2. Legacy behavior has been adopted in ast_read() such that if a
channel requests a stream topology change it is denied automatically
and the current stream topology is preserved if the application is
not capable of handling streams.
Tests have also been written which confirm the multistream and
non-multistream behavior.
ASTERISK-26839
Change-Id: Ia68ef22bca8e8457265ca4f0f9de600cbcc10bc9
* Removed the AST_CHAN_TP_MULTISTREAM tech property. We now rely
on read_stream being set to indicate a multi stream channel.
* Added ast_channel_is_multistream convenience function.
* Fixed issue where stream and default_stream weren't being set on
a frame retrieved from the queue.
* Now testing for NULL being returned from the driver's read or
read_stream callback.
* Fixed issue where the dropnondefault code was crashing on a
NULL f.
* Now enforcing that if either read_stream or write_stream are
set when ast_channel_tech_set is called that BOTH are set.
* Added the unit tests.
ASTERISK-26816
Change-Id: If7792b20d782e71e823dabd3124572cf0a4caab2
This introduces and documents the various states in the state machine.
This also introduces API functions that induce state changes, and places
TODO comments telling what needs to be done in addition to what is
already there. Those TODOs will be replaced with real code in upcoming
changes.
Change-Id: I871c0eb480b4c84d83e91ac5628e7a673e8b89ed
The bridge_native_rtp module did not properly handle the case where
a smart bridge operation occurs while a channel is suspended. In this
scenario the module would incorrectly set up local or remote RTP
bridging despite the media having to flow through Asterisk. The remote
endpoint would see two media streams and experience wonky audio.
The module has been changed so that it ensures both channels are
not suspended when performing the native RTP bridging and this
requirement has been documented in the bridge technology.
ASTERISK-26781
Change-Id: Id4022d73ace837d4a293106445e3ade10dbc7c7c
This change introduces an ast_read_stream function and callback in
the channel technology which allows reading frames from all streams
and not just the default streams.
The stream number has also been added to frames. This is to allow the
case where frames are queued onto the channel instead of being read
directly from the driver.
This change does impose a restriction on reading though: a chain of
frames can only contain frames from the same stream.
ASTERISK-26816
Change-Id: I5d7dc35e86694df91fd025126f6cfe0453aa38ce
This change adds an ast_write_stream function which allows
writing a frame to a specific media stream. It also moves
ast_write() to using this underneath by writing media
frames provided to it to the default streams of the channel.
Existing functionality (such as audiohooks, framehooks, etc)
are limited to being applied to the default stream only.
Unit tests have also been added which test the behavior of
both non-multistream and multistream channels to confirm that
the write() and write_stream() callbacks are invoked
appropriately.
ASTERISK-26793
Change-Id: I4df20d1b65bd4d787fce0b4b478e19d2dfea245c
Adds binaural synthesis to bridge_softmix (via convolution using libfftw3).
Binaural synthesis is conducted at 48kHz.
For a conference, only one spatial representation is rendered.
The default rendering is applied for mono-capable channels.
ASTERISK-26292
Change-Id: Iecdb381b6adc17c961049658678f6219adae1ddf
The "core show channel" CLI command will now output the streams
present on the channel with their details.
ASTERISK-26811
Change-Id: I9c95b57aa09415005f0677a1949a0feb07e4987a
This establishes the basic allocation/destruction of an SDP state
object, plus some of the simpler getter methods involved. Subsequent
tasks will deal with adding a state machine, creating SDPs from
capabilities and options, and merging SDPs into a joint SDP.
Change-Id: Ie3757ce186f04b65e9d1883f5aace53f24e53709
All of the realtime backends create artificial ast_categorys to pass
back into the core as query results. These categories have no filename
or line number information associated with them and the backends differ
slightly on how they create them. So create a couple helper macros to
help make things more consistent.
Also updated the call sites to remove redundant error messages about
memory allocation failure.
Note that res_config_ldap sets the category filename to the 'table name'
but that is not read by anything in the core, so I've dropped it.
Change-Id: I3a1fd91e0c807dea1ce3b643b0a6fe5be9002897
Joshua Colp
Jenkins2
Sean Bright
Mark Michelson
George Joseph
Kevin Harwell
Alexei Gradinari
Richard Mudgett
zuul
Alexander Traud
Torrey Searle
Corey Farrell
Richard Begg
frahaase