272 Commits (915de454f806387d00aef0eb38424d578c7e9ef9)

Author	SHA1	Message	Date
Joshua Colp	915de454f8	res_rtp_asterisk: Add SHA-256 support for DTLS and perform DTLS negotiation on RTCP. ... This change fixes up DTLS support in res_rtp_asterisk so it can accept and provide a SHA-256 fingerprint, so it occurs on RTCP, and so it occurs after ICE negotiation completes. Configuration options to chan_sip have also been added to allow behavior to be tweaked (such as forcing the AVP type media transports in SDP). ASTERISK-22961 #close Reported by: Jay Jideliov Review: https://reviewboard.asterisk.org/r/3679/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@417677 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	32d684ee25	res_http_websocket: Close websocket correctly and use careful fwrite ... When a client takes a long time to process information received from Asterisk, a write operation using fwrite may fail to write all information. This causes the underlying file stream to be in an unknown state, such that the socket must be disconnected. Unfortunately, there are two problems with this in Asterisk's existing websocket code: 1. Periodically, during the read loop, Asterisk must write to the connected websocket to respond to pings. As such, Asterisk maintains a reference to the session during the loop. When ast_http_websocket_write fails, it may cause the session to decrement its ref count, but this in and of itself does not break the read loop. The read loop's write, on the other hand, does not break the loop if it fails. This causes the socket to get in a 'stuck' state, preventing the client from reconnecting to the server. 2. More importantly, however, is that the fwrite in ast_http_websocket_write fails with a large volume of data when the client takes awhile to process the information. When it does fail, it fails writing only a portion of the bytes. With some debugging, it was shown that this was failing in a similar fashion to ASTERISK-12767. Switching this over to ast_careful_fwrite with a long enough timeout solved the problem. ASTERISK-23917 #close Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/3624/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@417310 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	df686c50d8	AST-2014-007: Fix DOS by consuming the number of allowed HTTP connections. ... Simply establishing a TCP connection and never sending anything to the configured HTTP port in http.conf will tie up a HTTP connection. Since there is a maximum number of open HTTP sessions allowed at a time you can block legitimate connections. A similar problem exists if a HTTP request is started but never finished. * Added http.conf session_inactivity timer option to close HTTP connections that aren't doing anything. Defaults to 30000 ms. * Removed the undocumented manager.conf block-sockets option. It interferes with TCP/TLS inactivity timeouts. * AMI and SIP TLS connections now have better authentication timeout protection. Though I didn't remove the bizzare TLS timeout polling code from chan_sip. * chan_sip can now handle SSL certificate renegotiations in the middle of a session. It couldn't do that before because the socket was non-blocking and the SSL calls were not restarted as documented by the OpenSSL documentation. * Fixed an off nominal leak of the ssl struct in handle_tcptls_connection() if the FILE stream failed to open and the SSL certificate negotiations failed. The patch creates a custom FILE stream handler to give the created FILE streams inactivity timeout and timeout after a specific moment in time capability. This approach eliminates the need for code using the FILE stream to be redesigned to deal with the timeouts. This patch indirectly fixes most of ASTERISK-18345 by fixing the usage of the SSL_read/SSL_write operations. ASTERISK-23673 #close Reported by: Richard Mudgett ........ Merged revisions 415841 from http://svn.asterisk.org/svn/asterisk/branches/1.8 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@415854 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	0df802b473	Correct UPGRADE.txt notes in r415825 ... The change was marked against the wrong version of Asterisk. My apologies. git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@415837 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	064bd035e7	MixMonitor: Add class authorization requirements to MixMonitor AMI commands ... MixMonitor AMI commands StartMixMonitor and StopMixMonitor lacked class authorization. StopMixMonitor now requires that the manager user either have the call or system class authorization. StartMixMonitor is a slightly larger issue since it can execute shell commands if the right arguments are passed into it, and we consider this a permission escalation. A security release will be issued for problem this shortly. ASTERISK-23609 #close Reported by: Corey Farrell git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@415825 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	95eb7df060	UPGRADE: Add note for REF_DEBUG flag ... ........ Merged revisions 414345 from http://svn.asterisk.org/svn/asterisk/branches/1.8 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@414346 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Walter Doekes	188d8f2bc7	configs: Clean up long line and typo in res_odbc.conf.sample. ... ........ Merged revisions 411807 from http://svn.asterisk.org/svn/asterisk/branches/1.8 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@411808 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	45ebd29e10	internal_timing: Remove the option and always make it enabled if a timing module is loaded. ... The masquerade supertest frequently fails because either the local channel chain doesn't completely optimize out or the DTMF handshake doesn't completely get accross. Local channel optimization requires frames flowing to trigger when optimization can happen. When optimization happens the media frame that triggered the optimization is dropped. Sending DTMF requires frames to flow in the other direction for timing purposes while sending nothing. If internal timing is not enabled when MOH is playing, Asterisk switches to received timing when an audio frame is received. With optimization dropping media frames and MOH not sending frames unless it receives frames, occasionaly there are no more frames being passed and the test fails. * The asterisk command line -I option and the asterisk.conf internal_timing option are removed. Asterisk now always uses internal timing when needed if any timing module is loaded. The issue ASTERISK-14861 did this quite awhile ago in v1.4 but effectively is broken if other internal timing modules besides DAHDI are used. The ast_read_generator_actions() now only does received timing if it has no choice for frame generators like MOH, silence, and playback streaming. * Cleaned up some code dealing with frame generators in ast_deactivate_generator(), generator_write_format_change(), ast_activate_generator(), and ast_channel_stop_silence_generator(). ASTERISK-22846 #close Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/3414/ ........ Merged revisions 411715 from http://svn.asterisk.org/svn/asterisk/branches/1.8 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@411716 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	9655e762aa	UPGRADE: Note IAX2 compatibility issue between 1.4 and 1.8+ systems. ... ........ Merged revisions 411457 from http://svn.asterisk.org/svn/asterisk/branches/1.8 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@411458 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	45fd6e01bd	res_config_odbc/res_odbc: Fix handling of non-text columns updates with empty values. ... This patch fixes setting nullable integer columns to NULL instead of an empty string, which fails for PostgreSQL, for example. The current code is supposed to do so, but the check is broken. The patch also allows the first column in the list to be a nullable integer. This patch also adds a compatibility setting in res_odbc.conf, allow_empty_string_in_nontext. It is enabled by default. It should be disabled for database backends (such as PostgreSQL) that require NULL instead of an empty string for Integer columns. Review: https://reviewboard.asterisk.org/r/3375 (issue ASTERISK-23459) Reported by: zvision patches: res_config_odbc.diff uploaded by zvision (License 5755) ........ Merged revisions 411399 from http://svn.asterisk.org/svn/asterisk/branches/1.8 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@411408 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kinsey Moore	2254a05348	ConfBridge: Correct prompt playback target ... Currently, when the first marked user enters the conference that contains waitmarked users, a prompt is played indicating that the user is being placed into the conference. Unfortunately, this prompt is played to the marked user and not the waitmarked users which is not very helpful. This patch changes that behavior to play a prompt stating "The conference will now begin" to the entire conference after adding and unmuting the waitmarked users since the design of confbridge is not conducive to playing a prompt to a subset of users in a conference in an asynchronous manner. (closes issue PQ-1396) Review: https://reviewboard.asterisk.org/r/3155/ Reported by: Steve Pitts git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@407857 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kevin Harwell	b83fb704c9	res_fax: check_modem_rate() returned incorrect rate for V.27 ... According to the new standard for V.27 and V.32 they are able to transmit at a bit rate of 4,800 or 9,600. The check_mode_rate function needed to be updated to reflect this. Also, because of this change the default 'minrate' value was updated to be 4800. (closes issue ASTERISK-22790) Reported by: Paolo Compagnini Patches: res_fax.txt uploaded by looserouting (license 6548) ........ Merged revisions 405656 from http://svn.asterisk.org/svn/asterisk/branches/1.8 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@405693 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	f90a045a36	verbosity: Fix performance of console verbose messages. ... The per console verbose level feature as previously implemented caused a large performance penalty. The fix required some minor incompatibilities if the new rasterisk is used to connect to an earlier version. If the new rasterisk connects to an older Asterisk version then the root console verbose level is always affected by the "core set verbose" command of the remote console even though it may appear to only affect the current console. If an older version of rasterisk connects to the new version then the "core set verbose" command will have no effect. * Fixed the verbose performance by not generating a verbose message if nothing is going to use it and then filtered any generated verbose messages before actually sending them to the remote consoles. * Split the "core set debug" and "core set verbose" CLI commands to remove the per module verbose support that cannot work with the per console verbose level. * Added a silent option to the "core set verbose" command. * Fixed "core set debug off" tab completion. * Made "core show settings" list the current console verbosity in addition to the root console verbosity. * Changed the default verbose level of the 'verbose' setting in the logger.conf [logfiles] section. The default is now to once again follow the current root console level. As a result, using the AMI Command action with "core set verbose" could again set the root console verbose level and affect the verbose level logged. (closes issue AST-1252) Reported by: Guenther Kelleter Review: https://reviewboard.asterisk.org/r/3114/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@405431 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kinsey Moore	05f0ad2c56	UPGRADE: Add a note about non-functionality ... Add a note that the "retry on 403 response to REGISTER" for chan_sip is non-functional in the versions in which it was first introduced. ........ Merged revisions 405088 from http://svn.asterisk.org/svn/asterisk/branches/1.8 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@405089 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
David M. Lee	a9ee948e90	security: Inhibit execution of privilege escalating functions ... This patch allows individual dialplan functions to be marked as 'dangerous', to inhibit their execution from external sources. A 'dangerous' function is one which results in a privilege escalation. For example, if one were to read the channel variable SHELL(rm -rf /) Bad Things(TM) could happen; even if the external source has only read permissions. Execution from external sources may be enabled by setting 'live_dangerously' to 'yes' in the [options] section of asterisk.conf. Although doing so is not recommended. (closes issue ASTERISK-22905) Review: http://reviewboard.digium.internal/r/432/ ........ Merged revisions 403913 from http://svn.asterisk.org/svn/asterisk/branches/1.8 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@403917 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Michael L. Young	9731431f08	chan_sip: Clarify 'Forcerport' Setting Displayed When Running "sip show peers" ... While looking at ASTERISK-22236, Walter Doekes pointed out that when running "sip show peers", the setting being displayed can be confusing. The display of "N" used to mean NAT (i.e. yes). The NAT setting has gone through many different changes resulting in the display of different characters to try and convey what the current setting is for 'Forcerport' (A for Auto and Forcerport is currently on, a for Auto but Forcerport is off, Y for yes, and N for no). During the initial code review to try and clarify these settings (especially since "N" no longer meant what it used to mean in prior versions of Asterisk), Mark Michelson suggested using the full space available to display the settings which helped to make the settings very clear. That was a great suggestion. Therefore, this patch does the following: * The column for 'Forcerport' now will show: Auto (Yes), Auto (No), Yes, or No. * A column for the 'Comedia' setting has been added. It too will display the setting in a non-cryptic way: Auto (Yes), Auto (No), Yes, or No. * UPGRADE.txt has been updated to document this change. (closes issue ASTERISK-22728) Reported by: Walter Doekes Tested by: Michael L. Young Patches: asterisk-forcerport-display-clarification_v3.diff uploaded by Michael L. Young (license 5026) Review: https://reviewboard.asterisk.org/r/2941 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@402111 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	ae78f04e4f	app_confbridge: Can now set the language used for announcements to the conference. ... ConfBridge now has the ability to set the language of announcements to the conference. The language can be set on a bridge profile in confbridge.conf or by the dialplan function CONFBRIDGE(bridge,language)=en. (closes issue ASTERISK-19983) Reported by: Jonathan White Patches: M19983_rev2.diff (license #5138) patch uploaded by junky (modified) Tested by: rmudgett git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@400741 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kinsey Moore	fb1c96baf4	chan_sip: Allow Asterisk to retry after 403 on register ... This adds a global option in chan_sip to allow it to continue attempting registration if a 403 is received, clearing the cached nonce and treating it as a non-fatal response. Normally, this would cause registration attempts to that endpoint to stop. (closes issue ASTERISK-17138) Review: https://reviewboard.asterisk.org/r/2874/ Reported by: Rudi ........ Merged revisions 400137 from http://svn.asterisk.org/svn/asterisk/branches/1.8 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@400140 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Joshua Colp	71ce810908	Make libuuid an optional dependency for res_rtp_asterisk instead of a requirement. ... Review: https://reviewboard.asterisk.org/r/2777/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@397604 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Michael L. Young	d9a406a884	Change "from" to "From". ... (related to issue ASTERISK-21903) git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@396199 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Michael L. Young	a317b5fc93	Adding a note to UPGRADE.txt about a change made to res_agi in order to ... indicate when streaming an audio file fails like it is done in other parts of the code to indicate an error. Note was requested by Paul Belanger: http://lists.digium.com/pipermail/asterisk-dev/2013-July/061420.html (related to issue ASTERISK-21903) ........ Merged revisions 396196 from http://svn.asterisk.org/svn/asterisk/branches/1.8 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@396197 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	06f0da01f5	Add an upgrade note for libuuid dependency; remove note in CHANGES ... This patch notes that libuuid is now a dependency for res_rtp_asterisk; this was introduced in between 11.4.0 and 11.5.0 to resolve a dependency for pjproject, which res_rtp_asterisk uses for ICE/STUN/TURN support. It also removes a conflicting note from CHANGES. While support for playing prompts to the first participant was added for app_queue, it was disabled by default and an option added to enable it. That was properly noted in the UPGRADE.txt file. git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@395020 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	4a99d74105	Add announce-to-first-user option for app_queue ... In r386792, the ability to play prompts to the first caller in a call queue was added. While this is arguably a bug fix for those who expect the first caller to continue receiving prompts while the agent is dialed, it has the side effect of preventing the first caller from hearing the agent immediately upon bridging. This may not be a problem for those who really want this option, but for those who didn't care whether or not the first caller in queue heard their position, it was an issue. This patch disables the ability for the first caller in the queue to hear prompts and adds a new option, announce-to-first-user, to queues.conf. Those who the behavior can enable it by setting this value to True. Note that if we ever implement the ability to have the prompts be stopped upon bridging, this option can be removed. (closes issue ASTERISK-21782) Reported by: Remi Quezada ........ Merged revisions 391215 from http://svn.asterisk.org/svn/asterisk/branches/1.8 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@391241 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Michael L. Young	74c57919a4	Fix For Not Overriding The Default Settings In chan_sip ... The initial report was that the "nat" setting in the [general] section was not having any effect in overriding the default setting. Upon confirming that this was happening and looking into what was causing this, it was discovered that other default settings would not be overriden as well. This patch works similar to what occurs in build_peer(). We create a temporary ast_flags structure and using a mask, we override the default settings with whatever is set in the [general] section. In the bug report, the reporter who helped to test this patch noted that the directmedia settings were being overriden properly as well as the nat settings. This issue is also present in Asterisk 1.8 and a separate patch will be applied to it. (issue ASTERISK-21225) Reported by: Alexandre Vezina Tested by: Alexandre Vezina, Michael L. Young Patches: asterisk-21225-handle-options-default-prob_v4.diff Michael L. Young (license 5026) Review: https://reviewboard.asterisk.org/r/2385/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@384827 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Matthew Jordan	77ca918044	Include the Username field in SIP Registry events when Status is registered ... In ASTERISK-17888, the AMI Registry event during SIP registrations was supposed to include the Username field. Somehow, one of the events was missed. This patch corrects that - the Username field should be included in all AMI Registry events involving SIP registrations. (issue ASTERISK-17888) (closes issue ASTERISK-21201) Reported by: Dmitriy Serov patches: chan_sip.c.diff uploaded by Dmitriy Serov (license 6479) ........ Merged revisions 382847 from http://svn.asterisk.org/svn/asterisk/branches/1.8 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@382848 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Matthew Jordan	47bd918dad	Let channels joining a MeetMe conference opt out of the denoiser ... For some channel drivers, specifically those that have a varying rate in the number of audio samples, the audio quality for a MeetMe conference can be exceedingly poor. This is due to a unilateral application of the DENOISE function in func_speex to channels joining the conference. The denoiser function in the speex library is initialized with the number of audio samples in each sample that will be provided to it. If the number of audio samples changes, the denoiser has to be thrown away and re-initialized. While this could be worked around by removing func_speex, that doesn't help if you actually use the denoiser with other channels on the system. This patches does the following: * Checks for the presence of func_speex as opposed to codec_speex when determining if the DENOISE function is present (which is where the function is actually implemented) * Adds an option to MeetMe 'n' that causes the denoiser to not be applied to a channel when it joins. This keeps the current behavior the default, but let's users disable the denoiser if it causes problems on their system. Review: https://reviewboard.asterisk.org/r/2358 (closes issue AST-1062) Reported by: Thomas Arimont ........ Merged revisions 382227 from http://svn.asterisk.org/svn/asterisk/branches/1.8 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@382230 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Matthew Jordan	e7d0d2bd4c	Update init.d scripts to handle stderr; readd splash screen for remote consoles ... When r376428 was commited to re-order start up sequences to be more tolerant of forking with thread primitives, a few items were changed that caused changes in behavior on some distros. This includes: * Not displaying the splash screen on a remote console. * Displaying an error message on stderr when a remote console cannot connect to a running instance of Asterisk. In the first case, the splash screen was re-added (thanks to Michael L. Young). In the second case, the various init.d scripts were modified to pipe stderr to /dev/null, as the error message is useful - if you execute a remote console or a remote console command execution and it fail, it should tell you. Note that the error message was always present, it just failed to be printed prior to r376428. Much thanks to the folks who quickly reported this problem, provided solutions, and promptly tested the various init.d scripts on a variety of distros. (closes issue ASTERISK-20945) Reported by: Warren Selby Tested by: Michael L. Young, Jamuel Starkey, kaldemar, Danny Nicholas, mjordan patches: asterisk-20945-remote-intro-msg.diff uploaded by elguero (license 5026) ASTERISK-20945-1.8-mjordan.diff uploaded by mjordan (license 6283) ........ Merged revisions 379760 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 379777 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@379790 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
David M. Lee	af6b4fed4f	Specify the -rpath linker flag when prefix != /usr. ... This allows Asterisk to start without having to specify the LD_LIBRARY_PATH. This can be disabled by passing --disable-rpath to configure. (closes issue ASTERISK-20407) Reported by: David M. Lee Review: https://reviewboard.asterisk.org/r/2132/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@379475 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	69fc13fb67	app_queue: Fix multiple calls to a queue member that is in only one queue. ... When ringinuse=no queue members can receive more than one call if these calls happen at nearly the same time. * Fix so a queue member does not receive more than one call from a queue. NOTE: This fix does not prevent multiple calls to a member if the member is in more than one queue. * Did some refactoring to eliminate some code redundancy. (issue ASTERISK-16115) Reported by: nik600 Patches: jira_asterisk_16115_single_q_v1.8.patch (license #5621) patch uploaded by rmudgett Modified * Revert the -r341580 and -r341599 changes adding the queues.conf check_state_unknown option as it was added in an attempt to fix this problem. The fix did not need to be optional. The fix should not have tried to explicitly set the device state. Setting the device state by something other than the device introduces a race condition. I also could not see how the change would be effective other than delaying the app_queue code long enough for the device state to propagate to app_queue. ........ Merged revisions 378663 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 378683 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@378687 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	8a32488929	Fix extension matching with the '-' char. ... The '-' char is supposed to be ignored by the dialplan extension matching. Unfortunately, it's treatment is not handled consistently throughout the extension matching code. * Made the old exten matching code consistently ignore '-' chars. * Made the old exten matching code consistently handle case in the matching. * Made ignore empty character sets. * Fixed ast_extension_cmp() to return -1, 0, or 1 as documented. The only user of it in pbx_lua.c was testing for -1. It was originally returning the strcmp() value for less than which is not usually going to be -1. * Fix character set sorting if the sets have the same number of characters and start with the same character. Character set [0-9] now sorts before [02-9a] as originally intended. * Updated some extension label and priority already in use warnings to also indicate if the extension is aliased. (closes issue ASTERISK-19205) Reported by: Philippe Lindheimer, Birger "WIMPy" Harzenetter Tested by: rmudgett Review: https://reviewboard.asterisk.org/r/2201/ ........ Merged revisions 376688 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 376689 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@376690 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Jonathan Rose	1d054dbbba	chan_sip: Document a change to user-field encoding introduced with r303509 ... The change in question was added to improve compliance with RFC3261, but at the time of commit, it wasn't adequately documented in the UPGRADE notes. (closes issue ASTERISK-20561) Reported by: Deniz Review: https://reviewboard.asterisk.org/r/2177/ ........ Merged revisions 375846 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@375847 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Jonathan Rose	c5485ddb4f	app_queue: add upgrade notes for 375216 ... Adds UPGRADE notes describing behavioral changes to rrmemory strategy caused by 375216 (issue AST-989) Reported by: Thomas Arimont git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@375247 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Mark Michelson	014e8a0a80	Add notes to UPGRADE.txt about addition of msg_id to VoiceMails. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370382 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Joshua Colp	941941ce98	Update UPGRADE.txt with notes about ICE support and res_xmpp. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370354 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Kinsey Moore	cb9756daa2	Add hangupcause translation support ... The HANGUPCAUSE hash (trunk only) meant to replace SIP_CAUSE has now been replaced with the HANGUPCAUSE and HANGUPCAUSE_KEYS dialplan functions to better facilitate access to the AST_CAUSE translations for technology-specific cause codes. The HangupCauseClear application has also been added to remove this data from the channel. (closes issue SWP-4738) Review: https://reviewboard.asterisk.org/r/2025/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370316 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Joshua Colp	a3fa37b8cf	Add a new unified Jingle, Google Jingle, and Google Talk channel driver written from scratch called chan_motif. ... This channel driver is a replacement for both chan_gtalk and chan_jingle but adds additional features not found in either. These features include full configuration reload, video, full codec support, bidirectional cause code mapping, hold, unhold, and ringing indication. It is also compliant with the current published Jingle and Google Jingle specifications. The original Google Talk protocol is also supported for Google Voice interoperability. You may ask yourself though where the name motif comes from... and I would say to you... music! motif: a perceivable or salient recurring fragment or succession of notes Sorta like a jingle! Review: https://reviewboard.asterisk.org/r/1917/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369769 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Kinsey Moore	afa03bd310	Parse ANI2 information from SIP From header parameters ... ANI2 information is now parsed out of SIP From headers when present in the oli, isup-oli, and ss7-oli parameters and is available via the CALLERID(ani2) dialplan function. (closes issue ASTERISK-19912) Patch-by: Rob Gagnon Review: https://reviewboard.asterisk.org/r/1947/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368784 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	cc69a0deaf	Document BLINDTRANSFER behavior change. ... (issue ASTERISK-19322) (closes issue ASTERISK-19875) Reported by: call ........ Merged revisions 368469 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 368470 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368472 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Kinsey Moore	b5a6de76fc	Commit framework for HANGUPCAUSE (replacement for SIP_CAUSE) ... This is the starting point for the Asterisk 11: Who Hung Up work and provides a framework which will allow channel drivers to report the types of hangup cause information available in SIP_CAUSE without incurring the overhead of the MASTER_CHANNEL dialplan function. The initial implementation only includes cause generation for chan_sip and does not include cause code translation utilities. This change deprecates SIP_CAUSE and replaces its method of reporting cause codes with the new framework. This change also deprecates the 'storesipcause' option in sip.conf. Review: https://reviewboard.asterisk.org/r/1822/ (Closes issue SWP-4221) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366408 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	d71d8ed995	Keep answered FollowMe calls until call accepted or last step times out. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@365856 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	73f48997f9	Add original party id and reason support. ... ISDN ETSI PTP and Q.SIG (And SS7 in future) have support for reporting who was the original redirecting party of a call. * Added support for the original redirecting party and reason to the REDIRECTING function and the system core as well as to the stubbed locations in sig_pri.c. Review: https://reviewboard.asterisk.org/r/1829/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362779 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	a35c7ba8e7	Add option to invoke the extensions.conf stdexten using the legacy macro method. ... ASTERISK-18809 eliminated the legacy macro invocation of the stdexten in favor of the Gosub method without a means of backwards compatibility. (issue ASTERISK-18809) (closes issue ASTERISK-19457) Reported by: Matt Jordan Tested by: rmudgett Review: https://reviewboard.asterisk.org/r/1855/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@361998 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Sean Bright	3a231e090f	chan_iax2: Correct spelling of 'Port' header in IAX2 PeerStatus AMI Events ... The PeerStatus event for IAX2 channels currently includes a header named Post which should have been Port. Post was removed and the AMI version has been updated to 1.3. ........ Merged revisions 359982 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359983 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Igor Goncharovskiy	c369a4416b	Massive changes in chan_unistim channel driver. Include many fixes in channel driver operation and add additional functionality: ...	15 years ago
Kinsey Moore	1fac2fba4b	Deprecated macro usage for connected line, redirecting, and CCSS ... This commit adds GoSub alternatives to connected line, redirecting, and CCSS macro hooks so that macro can finally be deprecated. This also adds deprecation warnings for those features when used and in documentation. Review: https://reviewboard.asterisk.org/r/1760/ (closes issue SWP-4256) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357013 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Tilghman Lesher	a78b0af5ea	Re-commit the verbose branch. ... This change permits each verbose destination (consoles, logger) to have its own concept of what the verbosity level is. The big feature here is that the logger will now be able to capture a particular verbosity level without condemning each console to need to suffer that level of verbosity. Additionally, a stray 'core set verbose' will no longer change what will go to the log. Review: https://reviewboard.asterisk.org/r/1599/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@355413 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Joshua Colp	afdd96712c	Make the 'c' option to MeetMe work even if the 'q' option is used. ... (closes issue ASTERISK-17053) Reported by: justdave git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354084 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Russell Bryant	055a19e128	Replace res_ais with a new module, res_corosync. ... This patch removes res_ais and introduces a new module, res_corosync. The OpenAIS project is deprecated and is now just a wrapper around Corosync. This module provides the same functionality using the same core infrastructure, but without the use of the deprecated components. Technically res_ais could have been used with an AIS implementation other than OpenAIS, but that is the only one I know of that was ever used. Review: https://reviewboard.asterisk.org/r/1700/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354046 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Kinsey Moore	71a8457d53	Support schema selection in cdr_adaptive_odbc ... Asterisk now supports using ODBC with databases where a single schema must be selected. Previously, INSERTs would fail because they did not take into account extra fields cause by having multiple schemas. This also corrects some SQL resource leaks. (closes issue ASTERISK-17106) Patch-by: Alexander Frolkin Patch-by: Tilgnman Lesher git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353964 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Kinsey Moore	c6fd4f5d74	SIP session timeout AMI event ... Add an AMI event in the Call category that is issued when a call is terminated due to either RTP stream inactivity or SIP session timer expiration. Event description: Event: SessionTimeout Source: source Channel: channel-name Uniqueid: channel-unique-id `source` can be either RTPTimeout or SIPSessionTimer (closes issue ASTERISK-16467) Patch-by: Kirill Katsnelson git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@351939 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago