3638 Commits (7c0b12dc41ae99345ba6de07db3bbf06ce57e372)

Author	SHA1	Message	Date
zuul	90634cc184	Merge "rtp_engine: allocate RTP dynamic payloads per session"	10 years ago
Kevin Harwell	d2f2cdf476	AMI: Updated version ... Updated the AMI version for the following reason (see CHANGES for more details): The 'PJSIPShowEndpoint' command's response event of 'IdentifyDetail' now contains a new optional parameter, 'MatchHeader'. Change-Id: Ie206913ef1dcfa6a2ebe3282da2387e52d6f05b9	10 years ago
Joshua Colp	c1ab8ca74c	Merge "res_pjsip_session: Enable RFC3578 overlap dialing support."	10 years ago
Kevin Harwell	9b103e7bea	rtp_engine: allocate RTP dynamic payloads per session ... Dynamic payload types were statically defined in Asterisk. This unfortunately limited the number of dynamic payloads that could be registered. With this patch dynamic payload type numbers are now assigned dynamically and per RTP instance. However, in order to limit any issues where some clients expect the old statically defined value this patch makes it so the value Asterisk used to pre- designate is used for the dynamic assignment if available. An option, "rtp_use_dynamic", has also been added (can be set in asterisk.conf) that turns the new dynamic behavior on or off. When off it reverts back to using statically defined payload values. This option defaults to "yes" in Asterisk 15. ASTERISK-26515 #close patches: ASTERISK-26515.diff submitted by jcolp (license 5000 Change-Id: I7653465c5ebeaf968f1a1cc8f3f4f5c4321da7fc	10 years ago
Richard Begg	6b7697ed48	res_pjsip_session: Enable RFC3578 overlap dialing support. ... Support for RFC3578 overlap dialling (i.e. 484 Response to partially matched destinations) as currently provided by chan_sip is missing from res_pjsip. This patch adds a new endpoint attribute (allow_overlap) [defaults to yes] which when set to yes enables 484 responses to partial destination matches rather than the current 404. ASTERISK-26864 Change-Id: Iea444da3ee7c7d4f1fde1d01d138a3d7b0fe40f6	10 years ago
zuul	9f64980e60	Merge "autochan/mixmonitor/chanspy: Fix unsafe channel locking and references."	10 years ago
Sean Bright	d4fcf196a2	res_hep: Capture actual transport type in use ... Rather than hard-coding UDP, allow consumers of the HEP API to specify which protocol is in use. Update the PJSIP provider to pass in the current protocol type. ASTERISK-26850 #close Change-Id: I54bbb0a001cfe4c6a87ad4b6f2014af233349978	10 years ago
Sean Bright	fc71c18a9b	thread safety: Don't use getprotobyname() ... POSIX does not require getprotobyname() to be thread safe and some implementations use static memory which causes issues when multiple threads are used. Further, our usage of it today is just to ultimately get IPPROTO_TCP for calls to setsockopt(). So instead we just use IPPROTO_TCP directly. Change-Id: I2e14e58674808f7ce99b2f5e900d0f90d0d8da48	10 years ago
Joshua Colp	732367e806	Merge "res_pjsip: Symmetric transports"	10 years ago
Joshua Colp	76e64f5589	Merge "RFC sdp: Initial SDP creation"	10 years ago
George Joseph	5013d8f5d3	res_pjsip: Symmetric transports ... A new transport parameter 'symmetric_transport' has been added. When a request from a dynamic contact comes in on a transport with this option set to 'yes', the transport name will be saved and used for subsequent outgoing requests like OPTIONS, NOTIFY and INVITE. It's saved as a contact uri parameter named 'x-ast-txp' and will display with the contact uri in CLI, AMI, and ARI output. On the outgoing request, if a transport wasn't explicitly set on the endpoint AND the request URI is not a hostname, the saved transport will be used and the 'x-ast-txp' parameter stripped from the outgoing packet. * config_transport was modified to accept and store the new parameter. * config_transport/transport_apply was updated to store the transport name in the pjsip_transport->info field using the pjsip_transport->pool on UDP transports. * A 'multihomed_on_rx_message' function was added to pjsip_message_ip_updater that, for incoming requests, retrieves the transport name from pjsip_transport->info and retrieves the transport. If transport->symmetric_transport is set, an 'x-ast-txp' uri parameter containing the transport name is added to the incoming Contact header. * An 'ast_sip_get_transport_name' function was added to res_pjsip. It takes an ast_sip_endpoint and a pjsip_sip_uri and returns a transport name if endpoint->transport is set or if there's an 'x-ast-txp' parameter on the uri and the uri host is an ipv4 or ipv6 address. Otherwise it returns NULL. * An 'ast_sip_dlg_set_transport' function was added to res_pjsip which takes an ast_sip_endpoint, a pjsip_dialog, and an optional pjsip_tpselector. It calls ast_sip_get_transport_name() and if a non-NULL is returned, sets the selector and sets the transport on the dialog. If a selector was passed in, it's updated. * res_pjsip/ast_sip_create_dialog_uac and ast_sip_create_dialog_uas were modified to call ast_sip_dlg_set_transport() instead of their original logic. * res_pjsip/create_out_of_dialog_request was modified to call ast_sip_get_transport_name() and pjsip_tx_data_set_transport() instead of its original logic. * Existing transport logic was removed from endpt_send_request since that can only be called after a create_out_of_dialog_request. * res_pjsip/ast_sip_create_rdata was converted to a wrapper around a new 'ast_sip_create_rdata_with_contact' function which allows a contact_uri to be specified in addition to the existing parameters. (See below) * res_pjsip_pubsub/internal_pjsip_evsub_send_request was eliminated since all it did was transport selection and that is now done in ast_sip_create_dialog_uac and ast_sip_create_dialog_uas. * 'contact_uri' was added to subscription_persistence. This was necessary because although the parsed rdata contact header has the x-ast-txp parameter added (if appropriate), subscription_persistence_update stores the raw packet which doesn't have it. subscription_persistence_recreate was then updated to call ast_sip_create_rdata_with_contact with the persisted contact_uri so the recreated subscription has the correct transport info to send the NOTIFYs. * res_pjsip_session/internal_pjsip_inv_send_msg was eliminated since all it did was transport selection and that is now done in ast_sip_create_dialog_uac. * pjsip_message_ip_updater/multihomed_on_tx_message was updated to remove all traces of the x-ast-txp parameter from the outgoing headers. NOTE: This change does NOT modify the behavior of permanent contacts specified on an aor. To do so would require that the permanent contact's contact uri be updated with the x-ast-txp parameter and the aor sorcery object updated. If we need to persue this, we need to think about cloning permanent contacts into the same store as the dynamic ones on an aor load so they can be updated without disturbing the originally configured value. You CAN add the x-ast-txp parameter to a permanent contact's uri but it would be much simpler to just set endpoint->transport. Change-Id: I4ee1f51473da32ca54b877cd158523efcef9655f	10 years ago
Joshua Colp	84f0871cba	Merge "Add rtcp-mux support"	10 years ago
Richard Mudgett	c87e7dd9ec	autochan/mixmonitor/chanspy: Fix unsafe channel locking and references. ... Dereferencing struct ast_autochan.chan without first calling ast_autochan_channel_lock() is unsafe because the pointer could change at any time due to a masquerade. Unfortunately, ast_autochan_channel_lock() itself uses struct ast_autochan.chan unsafely and can result in a deadlock if the original channel happens to get destroyed after a masquerade in addition to the pointer getting changed. The problem is more likely to happen with v11 and earlier because masquerades are used to optimize out local channels on those versions. However, it could still happen on newer versions if the channel is executing a dialplan application when the channel is transferred or redirected. In this situation a masquerade still must be used. * Added a lock to struct ast_autochan to safely be able to use ast_autochan.chan while trying to get the channel lock in ast_autochan_channel_lock(). The locking order is the channel lock then the autochan lock. Locking in the other direction requires deadlock avoidance. * Fix unsafe ast_autochan.chan usages in app_mixmonitor.c. * Fix unsafe ast_autochan.chan usages in app_chanspy.c. * app_chanspy.c: Removed unused autochan parameter from next_channel(). ASTERISK-26867 Change-Id: Id29dd22bc0f369b44e23ca423d2f3657187cc592	10 years ago
Mark Michelson	10fa49e327	Add rtcp-mux support ... This commit adds support for RFC 5761: Multiplexing RTP Data and Control Packets on a Single Port. Specifically, it enables the feature when using chan_pjsip. A new option, "rtcp_mux" has been added to endpoint configuration in pjsip.conf. If set, then Asterisk will attempt to use rtcp-mux with whatever it communicates with. Asterisk follows the rules set forth in RFC 5761 with regards to falling back to standard RTCP behavior if the far end does not indicate support for rtcp-mux. The lion's share of the changes in this commit are in res_rtp_asterisk.c. This is because it was pretty much hard wired to have an RTP and an RTCP transport. The strategy used here is that when rtcp-mux is enabled, the current RTCP transport and its trappings (such as DTLS SSL session) are freed, and the RTCP session instead just mooches off the RTP session. This leads to a lot of specialized if statements throughout. ASTERISK-26732 #close Reported by Dan Jenkins Change-Id: If46a93ba1282418d2803e3fd7869374da8b77ab5	10 years ago
George Joseph	8470c2bdea	RFC sdp: Initial SDP creation ... * Added additional fields to ast_sdp_options. * Re-organized ast_sdp. * Updated field names to correspond to RFC4566 terminology. * Created allocs/frees for SDP children. * Created getters/setters for SDP children where appropriate. * Added ast_sdp_create_from_state. * Refactored res_sdp_translator_pjmedia for changes. Change-Id: Iefbd877af7f5a4d3c74deead1bff8802661b0d48	10 years ago
Joshua Colp	3ed05badb9	core: Add stream topology changing primitives with tests. ... This change adds a few things to facilitate stream topology changing: 1. Control frame types have been added for use by the channel driver to notify the application that the channel wants to change the stream topology or that a stream topology change has been accepted. They are also used by the indicate interface to the channel that the application uses to indicate it wants to do the same. 2. Legacy behavior has been adopted in ast_read() such that if a channel requests a stream topology change it is denied automatically and the current stream topology is preserved if the application is not capable of handling streams. Tests have also been written which confirm the multistream and non-multistream behavior. ASTERISK-26839 Change-Id: Ia68ef22bca8e8457265ca4f0f9de600cbcc10bc9	10 years ago
Joshua Colp	fb11f038a3	Merge "stream: Unit tests for stream read and tweaks framework"	10 years ago
George Joseph	0560c32375	stream: Unit tests for stream read and tweaks framework ... * Removed the AST_CHAN_TP_MULTISTREAM tech property. We now rely on read_stream being set to indicate a multi stream channel. * Added ast_channel_is_multistream convenience function. * Fixed issue where stream and default_stream weren't being set on a frame retrieved from the queue. * Now testing for NULL being returned from the driver's read or read_stream callback. * Fixed issue where the dropnondefault code was crashing on a NULL f. * Now enforcing that if either read_stream or write_stream are set when ast_channel_tech_set is called that BOTH are set. * Added the unit tests. ASTERISK-26816 Change-Id: If7792b20d782e71e823dabd3124572cf0a4caab2	10 years ago
Mark Michelson	9c55a71798	SDP: Add initial SDP state machine. ... This introduces and documents the various states in the state machine. This also introduces API functions that induce state changes, and places TODO comments telling what needs to be done in addition to what is already there. Those TODOs will be replaced with real code in upcoming changes. Change-Id: I871c0eb480b4c84d83e91ac5628e7a673e8b89ed	10 years ago
Joshua Colp	ff2b4308d1	bridge_native_rtp: Handle case where channel joins already suspended. ... The bridge_native_rtp module did not properly handle the case where a smart bridge operation occurs while a channel is suspended. In this scenario the module would incorrectly set up local or remote RTP bridging despite the media having to flow through Asterisk. The remote endpoint would see two media streams and experience wonky audio. The module has been changed so that it ensures both channels are not suspended when performing the native RTP bridging and this requirement has been documented in the bridge technology. ASTERISK-26781 Change-Id: Id4022d73ace837d4a293106445e3ade10dbc7c7c	10 years ago
George Joseph	df22d297a6	Merge "channel: Add ast_read_stream function for reading frames from all streams."	10 years ago
Joshua Colp	6ac33bfe3e	Merge "Binaural synthesis (confbridge): Adds binaural synthesis to bridge_softmix."	10 years ago
zuul	461577b23b	Merge "channel: Add support for writing to a specific stream."	10 years ago
Joshua Colp	c07c6714f2	channel: Add ast_read_stream function for reading frames from all streams. ... This change introduces an ast_read_stream function and callback in the channel technology which allows reading frames from all streams and not just the default streams. The stream number has also been added to frames. This is to allow the case where frames are queued onto the channel instead of being read directly from the driver. This change does impose a restriction on reading though: a chain of frames can only contain frames from the same stream. ASTERISK-26816 Change-Id: I5d7dc35e86694df91fd025126f6cfe0453aa38ce	10 years ago
Joshua Colp	6cc890b880	channel: Add support for writing to a specific stream. ... This change adds an ast_write_stream function which allows writing a frame to a specific media stream. It also moves ast_write() to using this underneath by writing media frames provided to it to the default streams of the channel. Existing functionality (such as audiohooks, framehooks, etc) are limited to being applied to the default stream only. Unit tests have also been added which test the behavior of both non-multistream and multistream channels to confirm that the write() and write_stream() callbacks are invoked appropriately. ASTERISK-26793 Change-Id: I4df20d1b65bd4d787fce0b4b478e19d2dfea245c	10 years ago
frahaase	094c26aa68	Binaural synthesis (confbridge): Adds binaural synthesis to bridge_softmix. ... Adds binaural synthesis to bridge_softmix (via convolution using libfftw3). Binaural synthesis is conducted at 48kHz. For a conference, only one spatial representation is rendered. The default rendering is applied for mono-capable channels. ASTERISK-26292 Change-Id: Iecdb381b6adc17c961049658678f6219adae1ddf	10 years ago
zuul	6c22d4b320	Merge "core: Show streams in "core show channel"."	10 years ago
Joshua Colp	10302fa63f	Merge "Add initial SDP state code."	10 years ago
Joshua Colp	f58aefba5b	core: Show streams in "core show channel". ... The "core show channel" CLI command will now output the streams present on the channel with their details. ASTERISK-26811 Change-Id: I9c95b57aa09415005f0677a1949a0feb07e4987a	10 years ago
Joshua Colp	8f248f7a1c	Merge "realtime: Centralize some common realtime backend code"	10 years ago
Mark Michelson	a738772edd	Add initial SDP state code. ... This establishes the basic allocation/destruction of an SDP state object, plus some of the simpler getter methods involved. Subsequent tasks will deal with adding a state machine, creating SDPs from capabilities and options, and merging SDPs into a joint SDP. Change-Id: Ie3757ce186f04b65e9d1883f5aace53f24e53709	10 years ago
Joshua Colp	16b0bb39c1	Merge changes from topic 'sdp_state_beginnings' ... * changes: Add SDP translator and PJMEDIA implementation. Add initial SDP options.	10 years ago
Sean Bright	6e6c96d713	realtime: Centralize some common realtime backend code ... All of the realtime backends create artificial ast_categorys to pass back into the core as query results. These categories have no filename or line number information associated with them and the backends differ slightly on how they create them. So create a couple helper macros to help make things more consistent. Also updated the call sites to remove redundant error messages about memory allocation failure. Note that res_config_ldap sets the category filename to the 'table name' but that is not read by anything in the core, so I've dropped it. Change-Id: I3a1fd91e0c807dea1ce3b643b0a6fe5be9002897	10 years ago
Joshua Colp	fe88f2e5ca	Merge "Binaural synthesis (confbridge): Adds utils/conf_bridge_binaural_hrir_importer"	10 years ago
Mark Michelson	5a130b2e17	Add SDP translator and PJMEDIA implementation. ... This creates the following: * Asterisk's internal representation of an SDP * An API for translating SDPs from one format to another * An implementation of a translator for PJMEDIA Change-Id: Ie2ecd3cbebe76756577be9b133e84d2ee356d46b	10 years ago
Mark Michelson	8af6342555	Add initial SDP options. ... This is step one of adding an SDP API: defining some configurable settings for SDPs. This is based on options that are currently supported in Asterisk. Change-Id: I1ede91aafed403b12a9ccdfb91a88389baa7e5d7	10 years ago
zuul	ab34e46b3a	Merge "stream: Rename creates/destroys to allocs/frees"	10 years ago
Joshua Colp	b1edbc4c83	Merge "res_pjsip_pubsub: Correctly implement persisted subscriptions"	10 years ago
George Joseph	f8f513d363	stream: Rename creates/destroys to allocs/frees ... To be consistent with sdp implementation. Change-Id: I714e300939b4188f58ca66ce9d1e84b287009500	10 years ago
George Joseph	ca7fa7bbd2	Merge "stream: Add stream topology to channel"	10 years ago
George Joseph	4bdf5d329f	res_pjsip_pubsub: Correctly implement persisted subscriptions ... This patch fixes 2 original issues and more that those 2 exposed. * When we send a NOTIFY, and the client either doesn't respond or responds with a non OK, pjproject only calls our pubsub_on_evsub_state callback, no others. Since pubsub_on_evsub_state (which does the sub_tree cleanup) does not expect to be called back without the other callbacks being called first, it just returns leaving the sub_tree orphaned. Now pubsub_on_evsub_state checks the event for PJSIP_EVENT_TSX_STATE which is what pjproject will set to tell us that it was the transaction that timed out or failed and not the subscription itself timing our or being terminated by the client. If is TSX_STATE, pubsub_on_evsub_state now does the proper cleanup regardless of the state of the subscription. * When a client renews a subscription, we don't update the persisted subscription with the new expires timestamp. This causes subscription_persistence_recreate to prune the subscription if/when asterisk restarts. Now, pubsub_on_rx_refresh calls subscription_persistence_update to apply the new expires timestamp. This exposed other issues however... * When creating a dialog from rdata (which sub_persistence_recreate does from the packet buffer) there must NOT be a tag on the To header (which there will be when a client refreshes a subscription). If there is one, pjsip_dlg_create_uas will fail. To address this, subscription_persistence_update now accepts a flag that indicates that the original packet buffer must not be updated. New subscribes don't set the flag and renews do. This makes sure that when the rdata is recreated on asterisk startup, it's done from the original subscribe packet which won't have the tag on To. * When creating a dialog from rdata, we were setting the dialog's remote (SUBSCRIBE) cseq to be the same as the local (NOTIFY) cseq. When the client tried to resubscribe after a restart with the correct cseq, we'd reject the request with an Invalid CSeq error. * The acts of creating a dialog and evsub by themselves when recreating a subscription does NOT restart pjproject's subscription timer. The result was that even if we did correctly recreate the subscription, we never removed it if the client happened to go away or send a non-OK response to a NOTIFY. However, there is no pjproject function exposed to just set the timer on an evsub that wasn't created by an incoming subscribe request. To address this, we create our own timer using ast_sip_schedule_task. This timer is used only for re-establishing subscriptions after a restart. An earlier approach was to add support for setting pjproject's timer (via a pjproject patch) and while that patch is still included here, we don't use that call at the moment. While addressing these issues, additional debugging was added and some existing messages made more useful. A few formatting changes were also made to 'pjsip show scheduled tasks' to make displaying the subscription timers a little more friendly. ASTERISK-26696 ASTERISK-26756 Change-Id: I8c605fc1e3923f466a74db087d5ab6f90abce68e	10 years ago
Dennis Guse	b58de2fab7	Binaural synthesis (confbridge): Adds utils/conf_bridge_binaural_hrir_importer ... Adds the import tool for converting a HRIR database to hrirs.h ASTERISK-26292 Change-Id: I51eb31b54c23ffd9b544bdc6a09d20c112c8a547	10 years ago
George Joseph	bf2f091bbb	stream: Add stream topology to channel ... Adds topology set and get to channel. ASTERISK-26790 Change-Id: Ic379ea82a9486fc79dbd8c4d95c29fa3b46424f4	10 years ago
zuul	09fcfb26fa	Merge "stream: Add media stream topology definition and API"	10 years ago
George Joseph	8b72ec312b	stream: Add media stream topology definition and API ... This change adds the media stream topology definition and API for accessing and using it. Some refactoring of the stream was also done. ASTERISK-26786 Change-Id: Ic930232d24d5ad66dcabc14e9b359e0ff8e7f568	10 years ago
zuul	f9f74f4b75	Merge "manager: Restore Originate failure behavior from Asterisk 11"	10 years ago
Sean Bright	0910773077	manager: Restore Originate failure behavior from Asterisk 11 ... In Asterisk 11, if the 'Originate' AMI command failed to connect the provided Channel while in extension mode, a 'failed' extension would be looked up and run. This was, I believe, unintentionally removed in 51b6c49. This patch restores that behavior. This also adds an enum for the various 'synchronous' modes in an attempt to make them meaningful. ASTERISK-26115 #close Reported by: Nasir Iqbal Change-Id: I8afbd06725e99610e02adb529137d4800c05345d	10 years ago
Joshua Colp	bab4885f1e	stream: Add media stream definition and API with unit tests. ... This change adds the media stream definition and API for accessing and using it. Unit tests have also been written which exercise aspects of the API. ASTERISK-26773 Change-Id: I3dbe54065b55aaa51f467e1a3bafd67fb48cac87	10 years ago
Richard Mudgett	97c308471d	res_agi: Prevent an AGI from eating frames it should not. (Re-do) ... A dialplan intercept routine is equivalent to an interrupt routine. As such, the routine must be done quickly and you do not have access to the media stream. These restrictions are necessary because the media stream is the responsibility of some other code and interfering with or delaying that processing is bad. A possible future dialplan processing architecture change may allow the interception routine to run in a different thread from the main thread handling the media and remove the execution time restriction. * Made res_agi.c:run_agi() running an AGI in an interception routine run in DeadAGI mode. No touchy channel frames. ASTERISK-25951 ASTERISK-26343 ASTERISK-26716 Change-Id: I638f147ca7a7f2590d7194a8ef4090eb191e4e43	10 years ago
Richard Mudgett	72e3fc5845	Frame deferral: Revert API refactoring. ... There are several issues with deferring frames that are caused by the refactoring. 1) The code deferring frames mishandles adding a deferred frame to the deferred queue. As a result the deferred queue can only be one frame long. 2) Deferrable frames can come directly from the channel driver as well as the read queue. These frames need to be added to the deferred queue. 3) Whoever is deferring frames is really only doing the __ast_read() to collect deferred frames and doesn't care about the returned frames except to detect a hangup event. When frame deferral is completed we must make the normal frame processing see the hangup as a frame anyway. As such, there is no need to have varying hangup frame deferral methods. We also need to be aware of the AST_SOFTHANGUP_ASYNCGOTO hangup that isn't real. That fake hangup is to cause the PBX thread to break out of loops to go execute a new dialplan location. 4) To properly deal with deferrable frames from the channel driver as pointed out by (2) above, means that it is possible to process a dialplan interception routine while frames are deferred because of the AST_CONTROL_READ_ACTION control frame. Deferring frames is not implemented as a re-entrant operation so you could have the unsupported case of two sections of code thinking they have control of the media stream. A worse problem is because of the bad implementation of the AMI PlayDTMF action. It can cause two threads to be deferring frames on the same channel at the same time. (ASTERISK_25940) * Rather than fix all these problems simply revert the API refactoring as there is going to be only autoservice and safe_sleep deferring frames anyway. ASTERISK-26343 ASTERISK-26716 #close Change-Id: I45069c779aa3a35b6c863f65245a6df2c7865496	10 years ago