asterisk

Commit Graph

Author	SHA1	Message	Date
Richard Mudgett	721f92058f	Make number not available presentation also set screening to network provided. Q.951 indicates that when the presentation indicator is "Number not available due to interworking" for a number then the screening indicator field should be "Network provided". * Made ast_party_id_presentation() return AST_PRES_NUMBER_NOT_AVAILABLE when the presentation is "Number not available due to interworking". This fix makes Asterisk consistent and it also makes it consistent with earlier branches as far as this presentation value is concerned. * Made pri_to_ast_presentation() and ast_to_pri_presentation() conversions handle the "Number not available due to interworking" case better in sig_pri.c. This change is possible because the minimum required libpri version (v1.4.11) has the necessary defines in libpri.h. ........ Merged revisions 360309 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 360310 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360311 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	a22b56235b	Add ability for chan_dahdi ISDN to block connected line updates per span. Added new chan_dahdi.conf colp_send option parameter to block connected line updates per span. (closes issue ASTERISK-17025) Reported by: Michael Smith git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358997 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	9926662aba	Remove ISDN hold restriction for non-bridged calls. The check if an ISDN call is bridged before it could be placed on hold is not necessary and is overly restrictive. The check was originally done to prevent problems with call transfers in case a user tried to transfer a call connected to an application to another call connected to an application. The ISDN transfer code has not required this restriction for quite some time because ECT could transfer any two active calls to each other. * Remove ISDN hold restriction for calls connected to applications. * Made ast_waitfordigit_full() ignore AST_CONTROL_HOLD and AST_CONTROL_UNHOLD instead of generating a warning message. (closes issue ASTERISK-19388) Reported by: Birger Harzenetter Tested by: rmudgett ........ Merged revisions 357894 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 357895 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357896 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Terry Wilson	0e5c761c28	Opaquify ast_channel typedefs, fd arrays, and softhangup flag Review: https://reviewboard.asterisk.org/r/1784/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357721 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Terry Wilson	a9d607a357	Opaquify ast_channel structs and lists Review: https://reviewboard.asterisk.org/r/1773/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357542 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	764d2ccae2	Use more reasonable cause code when rejecting incoming call waiting calls. (closes issue ASTERISK-19397) Reported by: Birger Harzenetter Patches: nochannel-cause.patch (license #5870) patch uploaded by Birger Harzenetter ........ Merged revisions 357407 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 357408 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357409 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Terry Wilson	57f42bd74f	ast_channel opaquification of pointers and integral types Review: https://reviewboard.asterisk.org/r/1753/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356042 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Alec L Davis	a4f6d96b2e	push 'outgoing' flag from sig_XXX up to chan_dahdi 'p->outgoing' in chan_dahdi and sig_analog wern't kept in sync, particulary FXS ast_hangup didn't clear the 'outgoing' flag. sig_pri and sig_ss7 were keeping 'outgoing' flag insync. Now provides a callback for all the low level sig_XXX modules. (issue ASTERISK-19316) alecdavis (license 585) Reported by: Jeremy Pepper Tested by: alecdavis Review: https://reviewboard.asterisk.org/r/1747/ ........ Merged revisions 355850 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 355851 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@355852 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Terry Wilson	34c55e8e7c	Opaquify char * and char[] in ast_channel Review: https://reviewboard.asterisk.org/r/1733/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354968 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	63c5eaee43	Restore the 'w' modifier support for ISDN spans. Dial(DAHDI/g0/1234w888) This feature also causes the sending complete ie to be sent for switch types that do not automatically send the ie. (EuroISDN/ETSI) The main difference between dialing Dial(DAHDI/g0/1234w888) and Dial(DAHDI/g0/1234,,D(888)) is the sending of the sending complete ie. (closes issue ASTERISK-19176) Reported by: rmudgett Tested by: rmudgett ........ Merged revisions 353867 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 353868 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353872 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	23bc964e1c	Constify some more channel driver technology callback parameters. Review: https://reviewboard.asterisk.org/r/1707/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353685 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Terry Wilson	99cae5b750	Opaquify channel stringfields Continue channel opaque-ification by wrapping all of the stringfields. Eventually, we will restrict what can actually set these variables, but the purpose for now is to hide the implementation and keep people from adding code that directly accesses the channel structure. Semantic changes will follow afterward. Review: https://reviewboard.asterisk.org/r/1661/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352348 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Terry Wilson	04da92c379	Replace direct access to channel name with accessor functions There are many benefits to making the ast_channel an opaque handle, from increasing maintainability to presenting ways to kill masquerades. This patch kicks things off by taking things a field at a time, renaming the field to '__do_not_use_${fieldname}' and then writing setters/getters and converting the existing code to using them. When all fields are done, we can move ast_channel to a C file from channel.h and lop off the '__do_not_use_'. This patch sets up main/channel_interal_api.c to be the only file that actually accesses the ast_channel's fields directly. The intent would be for any API functions in channel.c to use the accessor functions. No more monkeying around with channel internals. We should use our own APIs. The interesting changes in this patch are the addition of channel_internal_api.c, the moving of the AST_DATA stuff from channel.c to channel_internal_api.c (note: the AST_DATA stuff will have to be reworked to use accessor functions when ast_channel is really opaque), and some re-working of the way channel iterators/callbacks are handled so as to avoid creating fake ast_channels on the stack to pass in matching data by directly accessing fields (since "name" is a stringfield and the fake channel doesn't init the stringfields, you can't use the ast_channel_name_set() function). I went with ast_channel_name(chan) for a getter, and ast_channel_name_set(chan, name) for a setter. The majority of the grunt-work for this change was done by writing a semantic patch using Coccinelle ( http://coccinelle.lip6.fr/ ). Review: https://reviewboard.asterisk.org/r/1655/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350223 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	4a125f45a0	Remove dead code since pri_grab() can never fail. Dead code makes programmers sick. I am sick of looking at it. ........ Merged revisions 345546 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 345558 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@345559 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	bd4f81b51f	Fix typo in sig_pri using wrong structure name. It is fortunate that the typo does not alter generated code since the e->restart.channel and e->ring.channel members are in the same position. (closes issue ASTERISK-18868) Reported by: zvision Patches: sig_pri.c.diff (License #5755) patch uploaded by zvision ........ Merged revisions 345370 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 345371 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@345375 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	6cf08ad550	Change D-channel warning to be less confusing on non-NFAS setups. The "No D-channels available! Using Primary channel as D-channel anyway!" WARNING message has been confusing on non-NFAS setups. The message refers to things that are NFAS specific. * Changed the warning to several different warnings to be more accurate for the situation and less confusing as a result: "No D-channels up! Switching selected D-channel from X to Y.", "No D-channels up!", and "D-channel is down!". ........ Merged revisions 342484 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 342485 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@342486 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	50350a47ea	Merged revisions 338323 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/10 ................ r338323 \| rmudgett \| 2011-09-28 17:36:57 -0500 (Wed, 28 Sep 2011) \| 12 lines Merged revisions 338322 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.8 ........ r338322 \| rmudgett \| 2011-09-28 17:35:52 -0500 (Wed, 28 Sep 2011) \| 5 lines Make duplicate call ptr warning message more helpful. * Adds the value of the call ptr to the duplicate call ptr message to help trace why there is a duplicate call ptr. ........ ................ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@338324 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	e39f6bba33	Merged revisions 337721 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/10 ................ r337721 \| rmudgett \| 2011-09-22 16:37:41 -0500 (Thu, 22 Sep 2011) \| 25 lines Merged revisions 337720 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.8 ........ r337720 \| rmudgett \| 2011-09-22 16:29:46 -0500 (Thu, 22 Sep 2011) \| 18 lines Made ISDN not add numbering plan prefix strings to empty numbers. When the Caller-ID is restricted, the expected behavior is for the Caller-ID to be blank. In chan_dahdi, the national prefix is placed onto the Caller-ID number even if it is restricted (empty) causing the Caller-ID to be the national prefix rather than blank. This behavior was lost when sig_pri was extracted from chan_dahdi. * Made not add prefix strings to empty connected line, calling, and ANI number strings. (closes issue ASTERISK-18577) Reported by: Kris Shaw Patches: jira_asterisk_18577_v1.8.patch (license #5621) patch uploaded by rmudgett Tested by: Kris Shaw ........ ................ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@337722 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	0f9330b58c	Merged revisions 336570 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/10 ................ r336570 \| rmudgett \| 2011-09-19 10:32:00 -0500 (Mon, 19 Sep 2011) \| 11 lines Merged revisions 336569 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.8 ........ r336569 \| rmudgett \| 2011-09-19 10:25:34 -0500 (Mon, 19 Sep 2011) \| 4 lines Rework sig_pri_hangup() to be simpler and clearer. JIRA AST-675 ........ ................ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@336571 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Matthew Jordan	8b5ba33fe0	Merged revisions 335078 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/10 ................ r335078 \| mjordan \| 2011-09-09 11:27:01 -0500 (Fri, 09 Sep 2011) \| 29 lines Merged revisions 335064 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.8 ........ r335064 \| mjordan \| 2011-09-09 11:09:09 -0500 (Fri, 09 Sep 2011) \| 23 lines Updated SIP 484 handling; added Incomplete control frame When a SIP phone uses the dial application and receives a 484 Address Incomplete response, if overlapped dialing is enabled for SIP, then the 484 Address Incomplete is forwarded back to the SIP phone and the HANGUPCAUSE channel variable is set to 28. Previously, the Incomplete application dialplan logic was automatically triggered; now, explicit dialplan usage of the application is required. Additionally, this patch adds a new AST_CONTOL_FRAME type called AST_CONTROL_INCOMPLETE. If a channel driver receives this control frame, it is an indication that the dialplan expects more digits back from the device. If the device supports overlap dialing it should attempt to notify the device that the dialplan is waiting for more digits; otherwise, it can handle the frame in a manner appropriate to the channel driver. (closes issue ASTERISK-17288) Reported by: Mikael Carlsson Tested by: Matthew Jordan Review: https://reviewboard.asterisk.org/r/1416/ ........ ................ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@335079 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	265102faf8	Merged revisions 332265 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/10 ................ r332265 \| rmudgett \| 2011-08-17 11:01:29 -0500 (Wed, 17 Aug 2011) \| 33 lines Merged revisions 332264 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.8 ........ r332264 \| rmudgett \| 2011-08-17 10:51:08 -0500 (Wed, 17 Aug 2011) \| 26 lines Outgoing BRI calls fail when using Asterisk 1.8 with HA8, HB8, and B410P cards. France Telecom brings layer 2 and layer 1 down on BRI lines when the line is idle. When layer 1 goes down Asterisk cannot make outgoing calls and the HA8 and HB8 cards also get IRQ misses. The inability to make outgoing calls is because the line is in red alarm and Asterisk will not make calls over a line it considers unavailable. The IRQ misses for the HA8 and HB8 card are because the hardware is switching clock sources from the line which just brought layer 1 down to internal timing. There is a DAHDI option for the B410P card to not tell Asterisk that layer 1 went down so Asterisk will allow outgoing calls: "modprobe wcb4xxp teignored=1". There is a similar DAHDI option for the HA8 and HB8 cards: "modprobe wctdm24xxp bri_teignored=1". Unfortunately that will not clear up the IRQ misses when the telco brings layer 1 down. * Add layer 2 persistence option to customize the layer 2 behavior on BRI PTMP lines. The new option has three settings: 1) Use libpri default layer 2 setting. 2) Keep layer 2 up. Bring layer 2 back up when the peer brings it down. 3) Leave layer 2 down when the peer brings it down. Layer 2 will be brought up as needed for outgoing calls. JIRA AST-598 ........ ................ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@332270 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	a3ba55e7c7	Merged revisions 330051 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/10 ................ r330051 \| rmudgett \| 2011-07-28 12:10:37 -0500 (Thu, 28 Jul 2011) \| 29 lines Merged revisions 330050 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.8 ................ r330050 \| rmudgett \| 2011-07-28 12:04:24 -0500 (Thu, 28 Jul 2011) \| 22 lines Merged revisions 330033 from https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier .......... r330033 \| rmudgett \| 2011-07-28 11:26:38 -0500 (Thu, 28 Jul 2011) \| 15 lines Datacalls with B410P fail. Incoming and outgoing call legs of a data call are using different formats: a-law, u-law. When the call is bridged, the media stream is run through translation to convert the media formats. The translation is bad for data calls. * Make incoming call that does not explicitly specify u-law or a-law use the DAHDI channel's default law. The outgoing call always uses the default law from the DAHDI channel. (closes issue ABE-2800) Patches: jira_abe_2800_companding.patch (license #5621) patch uploaded by rmudgett .......... ................ ................ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@330052 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Russell Bryant	f243d129c9	Merged revisions 329257 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/10 ........ r329257 \| russell \| 2011-07-21 15:22:36 -0500 (Thu, 21 Jul 2011) \| 2 lines s/1.10/10.0/ ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@329258 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	5257a915a8	Option needed for Q931_IE_TIME_DATE to be optional in CONNECT message. The NEC SV8300 rejects the Q931_IE_TIME_DATE for Q.SIG. Add option to specify if and how much of the current time is put in Q931_IE_TIME_DATE. * Send date/time ie never. * Send date/time ie date only. * Send date/time ie date and hour. * Send date/time ie date, hour, and minute. * Send date/time ie date, hour, minute, and second. * Send date/time ie default: Libpri will send date and hhmm only when in NT PTMP mode to support ISDN phones. (closes issue #19221) Reported by: kenner JIRA SWP-3396 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@319427 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	1ad49f46ce	Merged revisions 318783 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.8 ........ r318783 \| rmudgett \| 2011-05-12 20:47:05 -0500 (Thu, 12 May 2011) \| 14 lines PRI early media won't ring. And another way to pass early media. Don't indicate that there is inband information present, just assume that the B channel is connected. * Restore clearing the dialing flag Rx squelch unconditionally when a PROCEEDING message comes in. (closes issue #19268) Reported by: tbsky Patches: issue19268_v1.8.patch uploaded by rmudgett (license 664) Tested by: tbsky ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318784 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	d1e27b1026	Merged revisions 318499 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.8 ........ r318499 \| rmudgett \| 2011-05-10 18:41:08 -0500 (Tue, 10 May 2011) \| 15 lines Unable to pickup DAHDI/PRI call because call state is reported as DIALING. The channel state is not updated to RINGING when an ALERTING message is received. Regression caused when sig_pri.c (also sig_ss7.c) extracted from chan_dahdi.c. * Added missing channel state update to RINGING when the AST_CONTROL_RINGING frame is queued for ISDN and SS7. (closes issue #19257) Reported by: alecdavis Patches: issue19257_v1.8_v2.patch uploaded by rmudgett (license 664) Tested by: alecdavis, rmudgett ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318500 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	d7c94e1e04	Merged revisions 318231 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.8 ................ r318231 \| rmudgett \| 2011-05-09 11:57:18 -0500 (Mon, 09 May 2011) \| 41 lines Don't get early media for ISDN on outgoing calls. It looks to be a long-standing misinterpretation of the progress indicator ie values: 1 - Call is not end-to-end ISDN; further call progress information may be available in-band. 8 - In-band information or an appropriate pattern is now available. Only value 8 is handled by chan_dahdi/sig_pri. The 1 value is not handled as early media probably because the meaning of the second half of it's description was overlooked. * Test to see if either PRI_PROG_CALL_NOT_E2E_ISDN(1) or PRI_PROG_INBAND_AVAILABLE(8) bits are set to open the media path. (closes issue #18868) Reported by: isrl Patches: issue18868_19246_v1.8.patch uploaded by rmudgett (license 664) Tested by: satish_lx .......... No inband progress on PRI_EVENT_RINGING even if inband flag set. My ISDN-PRI provider sends an ALERTING with "Inband information or appropriate pattern now available", but Asterisk only generates and passes the RING to the SIP extension, not the inband message. Unfortunately, the inband message is not a ringback tone but a prompt that says the number is not in service. The SIP extension then hears two rings and the call is hungup which confuses the caller. * Post an AST_CONTROL_PROGRESS as well as opening the media path if inband audio is indicated with an ALERTING message. (closes issue #19246) Reported by: cristiandimache Patches: issue19246_v1.8.patch uploaded by rmudgett (license 664) Tested by: cristiandimache ................ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318232 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	810b9c8879	Merged revisions 316224 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.8 ........ r316224 \| rmudgett \| 2011-05-03 14:18:30 -0500 (Tue, 03 May 2011) \| 16 lines The dahdi_hangup() call does not clean up the channel fully. After dahdi_hangup() has supposedly hungup an ISDN channel there is still traffic on the S0-bus because the channel was not cleaned up fully. Shuffled the hangup code to include some missing cleanup. Also fixed some code formatting in the area. I think the primary missing clean up code was the call to tone_zone_play_tone() to turn off any active tones on the channel. (closes issue #19188) Reported by: jg1234 Patches: issue19188_v1.8.patch uploaded by rmudgett (license 664) Tested by: jg1234 ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@316240 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	0f1ff9141e	Implement AMI action PRIShowSpans. PRIShowSpans works like the AMI action DAHDIShowChannels but for PRI spans. It is similar to the CLI command "pri show spans". (closes issue #15980) Reported by: dwery git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@314735 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	13e925b276	Simplify sig_pri.c:build_status(). git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@314734 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	37274c73ee	Problems with ISDN MWI to phones. The "controlling user number" is always the number of the voice mail box which is identical with the subscriber number itself. This number which is listed in the ISDN phone MWI menu cannot be called back to contact the voice mail box. The controlling user number should be made configurable. JIRA ABE-2738 JIRA SWP-2846 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@314116 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	ce17f956dc	Add private lock deadlock avoidance callback to PRI and SS7. Factor out the equivalent function for analog. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@313100 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Alec L Davis	1e33d71b79	Merged revisions 313001 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.8 ........ r313001 \| alecdavis \| 2011-04-07 22:19:31 +1200 (Thu, 07 Apr 2011) \| 13 lines Fix ISDN calling subaddr User Specified Odd/Even Flag Calculation of the Odd/Even flag was wrong. Implement correct algo, and set odd/even=0 if data would be truncated. Only allow automatic calculation of the O/E flag, don't let dialplan influence. (closes issue #19062) Reported by: festr Patches: bug19062.diff2.txt uploaded by alecdavis (license 585) Tested by: festr, alecdavis, rmudgett ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@313005 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	698a356737	Merged revisions 312949 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.8 ........ r312949 \| rmudgett \| 2011-04-05 13:45:24 -0500 (Tue, 05 Apr 2011) \| 6 lines Crash if ISDN span layer 1 is down on initial load. Regression from -r312575 B channel shifting during negotiation. * Also combine updating the alarm flag with clearing the resetting flag. ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@312950 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	121b90a47d	Remove the channel parameter from sig_pri_handle_subcmds(). It was only used in a debug message and may not be correct anyway. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@312716 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	e1ceb52b51	Merged revisions 312575 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.8 ................ r312575 \| rmudgett \| 2011-04-04 11:10:50 -0500 (Mon, 04 Apr 2011) \| 52 lines Merged revisions 312574 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.6.2 ................ r312574 \| rmudgett \| 2011-04-04 11:00:02 -0500 (Mon, 04 Apr 2011) \| 45 lines Merged revisions 312573 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r312573 \| rmudgett \| 2011-04-04 10:49:30 -0500 (Mon, 04 Apr 2011) \| 38 lines Issues with ISDN calls changing B channels during call negotiations. The handling of the PROCEEDING message was not using the correct call structure if the B channel was changed. (The same for PROGRESS.) The call was also not hungup if the new B channel is not provisioned or is busy. * Made all call connection messages (SETUP_ACKNOWLEDGE, PROCEEDING, PROGRESS, ALERTING, CONNECT, CONNECT_ACKNOWLEDGE) ensure that they are using the correct structure and B channel. If there is any problem with the operations then the call is now hungup with an appropriate cause code. * Made miscellaneous messages (INFORMATION, FACILITY, NOTIFY) find the correct structure by looking for the call and not using the channel ID. NOTIFY is an exception with versions of libpri before v1.4.11 because a call pointer is not available for Asterisk to use. * Made all hangup messages (DISCONNECT, RELEASE, RELEASE_COMPLETE) find the correct structure by looking for the call and not using the channel ID. (closes issue #18313) Reported by: destiny6628 Tested by: rmudgett JIRA SWP-2620 (closes issue #18231) Reported by: destiny6628 Tested by: rmudgett JIRA SWP-2924 (closes issue #18488) Reported by: jpokorny JIRA SWP-2929 JIRA AST-437 (The issues fixed here are most likely causing this JIRA issue.) JIRA DAHDI-406 JIRA LIBPRI-33 (Stuck resetting flag likely fixed) ........ ................ ................ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@312579 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	d000b76ebc	Merged revisions 311297 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.8 ........ r311297 \| rmudgett \| 2011-03-17 21:59:05 -0500 (Thu, 17 Mar 2011) \| 12 lines Race condition when ISDN CallRerouting/CallDeflection invoked. The queued AST_CONTROL_BUSY could sometimes be processed before the call_forward dial string is recognized. * Moved setting the call_forwarding dial string after sending a response to the initiator and just queue an empty frame to wake up the media thread instead of an AST_CONTROL_BUSY. * Added check for empty rerouting/deflection number and respond with an error. ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@311298 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	c551e9105d	Merged revisions 309994 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.8 ........ r309994 \| rmudgett \| 2011-03-08 10:37:02 -0600 (Tue, 08 Mar 2011) \| 1 line Make pri parameter description consistent. ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@309996 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	928ec2b990	Merged revisions 309445 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.8 ........ r309445 \| rmudgett \| 2011-03-04 09:22:04 -0600 (Fri, 04 Mar 2011) \| 46 lines Get real channel of a DAHDI call. Starting with Asterisk v1.8, the DAHDI channel name format was changed for ISDN calls to: DAHDI/i<span>/<number>[:<subaddress>]-<sequence-number> There were several reasons that the channel name had to change. 1) Call completion requires a device state for ISDN phones. The generic device state uses the channel name. 2) Calls do not necessarily have B channels. Calls placed on hold by an ISDN phone do not have B channels. 3) The B channel a call initially requests may not be the B channel the call ultimately uses. Changes to the internal implementation of the Asterisk master channel list caused deadlock problems for chan_dahdi if it needed to change the channel name. Chan_dahdi no longer changes the channel name. 4) DTMF attended transfers now work with ISDN phones because the channel name is "dialable" like the chan_sip channel names. For various reasons, some people need to know which B channel a DAHDI call is using. * Added CHANNEL(dahdi_span), CHANNEL(dahdi_channel), and CHANNEL(dahdi_type) so the dialplan can determine the B channel currently in use by the channel. Use CHANNEL(no_media_path) to determine if the channel even has a B channel. * Added AMI event DAHDIChannel to associate a DAHDI channel with an Asterisk channel so AMI applications can passively determine the B channel currently in use. Calls with "no-media" as the DAHDIChannel do not have an associated B channel. No-media calls are either on hold or call-waiting. (closes issue #17683) Reported by: mrwho Tested by: rmudgett (closes issue #18603) Reported by: arjankroon Patches: issue17683_18603_v1.8_v2.patch uploaded by rmudgett (license 664) Tested by: stever28, rmudgett ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@309446 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	2b063d4dca	Merged revisions 308622 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.8 ........ r308622 \| rmudgett \| 2011-02-23 17:38:04 -0600 (Wed, 23 Feb 2011) \| 9 lines sig_pri_new_ast_channel() should return NULL when new_ast_channel() fails. (closes issue #18874) Reported by: cmaj Patches: patch-sig_pri-crash-possible-null-channel-pointer.diff.txt uploaded by cmaj (license 830) JIRA SWP-3172 ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@308623 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	4a48600231	Add CLI "pri show channels" command. List the current mapping of DAHDI B channels to Asterisk channel names and which calls are on hold or call-waiting. Calls on hold or call-waiting are not associated with any B channel. JIRA LIBPRI-27 JIRA SWP-2547 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@307964 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	b2ef13cb60	Merged revisions 307879 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.8 ........ r307879 \| rmudgett \| 2011-02-15 10:13:55 -0600 (Tue, 15 Feb 2011) \| 37 lines No response sent for SIP CC subscribe/resubscribe request. Asterisk does not send a response if we try to subscribe for call completion after we have received a 180 Ringing. You can only subscribe for call completion when the call has been cleared. When we receive the 180 Ringing, for this call, its call-completion state is 'CC_AVAILABLE'. If we then send a subscribe message to Asterisk, it trys to change the call-completion state to 'CC_CALLER_REQUESTED'. Because this is an invalid state change, it just ignores the message. The only state Asterisk will accept our subscribe message is in the 'CC_CALLER_OFFERED' state. Asterisk will go into the 'CC_CALLER_OFFERED' when the SIP client clears the call by sending a CANCEL. Asterisk should always send a response. Even if its a negative one. The fix is to allow for the CCSS core to notify a CC agent that a failure has occurred when CC is requested. The "ack" callback is replaced with a "respond" callback. The "respond" callback has a parameter indicating either a successful response or a specific type of failure that may need to be communicated to the requester. (closes issue #18336) Reported by: GeorgeKonopacki Tested by: mmichelson, rmudgett JIRA SWP-2633 (closes issue #18337) Reported by: GeorgeKonopacki Tested by: mmichelson JIRA SWP-2634 ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@307883 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	49feb747ba	Pass a MCID request to the bridged channel. Pass a MCID request to the bridged channel so the bridged channel can send it to the network. The ability to send the MCID request on an ISDN span is enabled with the new chan_dahdi.conf mcid_send option. JIRA SWP-2845 JIRA ABE-2736 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306755 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Richard Mudgett	a8aeb04a9f	Add ISDN display ie text handling options to chan_dahdi.conf. The display ie handling can be controlled independently in the send and receive directions with the following options: * Block display text data. * Use display text in SETUP/CONNECT messages for name. * Use display text for COLP name updates (FACILITY/NOTIFY as appropriate). * Pass arbitrary display text during a call. Sent in INFORMATION messages. Received from any message that the display text was not used as a name. If the display options are not set then the options default to legacy behavior. The arbitrary display text is exchanged between bridged channels using the AST_FRAME_TEXT frame type. To send display text from the dialplan use the SendText() application when the arbitrary display text option is enabled. JIRA SWP-2688 JIRA ABE-2693 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306396 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Paul Belanger	3556e4c2d4	Replace ast_log(LOG_DEBUG, ...) with ast_debug() (closes issue #18556) Reported by: kkm Review: https://reviewboard.asterisk.org/r/1071/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306258 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Richard Mudgett	44349de2df	Merged revisions 305343 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.8 ................ r305343 \| rmudgett \| 2011-01-31 18:01:09 -0600 (Mon, 31 Jan 2011) \| 21 lines Merged revisions 305342 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.6.2 ................ r305342 \| rmudgett \| 2011-01-31 17:50:10 -0600 (Mon, 31 Jan 2011) \| 14 lines Merged revisions 305341 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r305341 \| rmudgett \| 2011-01-31 17:45:58 -0600 (Mon, 31 Jan 2011) \| 7 lines Obtain the pri lock for PRI queue counters. Need to obtain the pri lock when calling pri_dump_info_str() to avoid a reentrancy problem when calculating the Q.921 Q count statistic. JIRA AST-484 ........ ................ ................ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@305344 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Richard Mudgett	ecdbb3d1d9	Merged from revision 304341 https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier .......... r304341 \| rmudgett \| 2011-01-26 16:38:39 -0600 (Wed, 26 Jan 2011) \| 7 lines Add connected line chan_dahdi.conf pricpndialplan option. * Added from_channel value to prilocaldialplan option. JIRA ABE-2731 JIRA SWP-2842 .......... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@304385 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Richard Mudgett	7889af7cab	Merged revisions 303771 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.8 ................ r303771 \| rmudgett \| 2011-01-25 11:49:20 -0600 (Tue, 25 Jan 2011) \| 54 lines Merged revisions 303769 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.6.2 ................ r303769 \| rmudgett \| 2011-01-25 11:42:42 -0600 (Tue, 25 Jan 2011) \| 47 lines Merged revisions 303765 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r303765 \| rmudgett \| 2011-01-25 11:36:50 -0600 (Tue, 25 Jan 2011) \| 40 lines Sending out unnecessary PROCEEDING messages breaks overlap dialing. Issue #16789 was a good idea. Unfortunately, it breaks overlap dialing through Asterisk. There is not enough information available at this point to know if dialing is complete. The ast_exists_extension(), ast_matchmore_extension(), and ast_canmatch_extension() calls are not adequate to detect a dial through extension pattern of "_9!". Workaround is to use the dialplan Proceeding() application early in non-dial through extensions. * Effectively revert issue #16789. * Allow outgoing overlap dialing to hear dialtone and other early media. A PROGRESS "inband-information is now available" message is now sent after the SETUP_ACKNOWLEDGE message for non-digital calls. An AST_CONTROL_PROGRESS is now generated for incoming SETUP_ACKNOWLEDGE messages for non-digital calls. * Handling of the AST_CONTROL_CONGESTION in chan_dahdi/sig_pri was inconsistent with the cause codes. * Added better protection from sending out of sequence messages by combining several flags into a single enum value representing call progress level. * Added diagnostic messages for deferred overlap digits handling corner cases. (closes issue #17085) Reported by: shawkris (closes issue #18509) Reported by: wimpy Patches: issue18509_early_media_v1.8_v3.patch uploaded by rmudgett (license 664) Expanded upon issue18509_early_media_v1.8_v3.patch to include analog and SS7 because of backporting requirements. Tested by: wimpy, rmudgett ........ ................ ................ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@303772 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Richard Mudgett	c69406f384	Merged revisions 301946 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.8 ........ r301946 \| rmudgett \| 2011-01-14 15:09:57 -0600 (Fri, 14 Jan 2011) \| 13 lines Deadlock between dahdi_request() and pri_dchannel() processing an incomming call. The sig_pri_new_ast_channel() is called with the channel private lock held when pri_dchannel() calls it and no channel private lock held when dahdi_request() calls it. The use of pri_grab() in sig_pri_new_ast_channel() could leave the channel private lock held when it returns if the lock was not held before calling it. Make sig_pri_new_ast_channel() just lock the PRI span lock instead of using pri_grab(). It is safe to do this because dahdi_request() does not have the channel private lock and the deadlock potential with the PRI span lock is only between pri_dchannel() and other threads. ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@301947 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Richard Mudgett	398d633ce0	Merged revisions 300714 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.8 ................ r300714 \| rmudgett \| 2011-01-05 14:54:21 -0600 (Wed, 05 Jan 2011) \| 21 lines Merged revision 300711 from https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier .......... r300711 \| rmudgett \| 2011-01-05 13:43:55 -0600 (Wed, 05 Jan 2011) \| 14 lines A call retrieved from hold may wind up with no audio. If the retrieved call is natively bridged then the call may not have any audio path. The following warning message is given: "Failed to add <dfd> to conference <chan>/<chan>: Invalid argument". * Open the media on a B channel when pri_fixup_principle() moves the call from a no_b_channel channel to a real channel. * Added lock protection while pri_fixup_principle() moves a call from one private structure to another. * Made some pri_fixup_principle() messages more meaningful. .......... ................ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@300716 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago

1 2 3

143 Commits (745fcdbffe207d1cbbfabac3c8e8ea1a33df6a48)