3677 Commits (71dc33356504e32b6ed4bbf6faaacb51a3602d10)

Author	SHA1	Message	Date
George Joseph	06045fc29e	Merge "Revert "AGI: Only defer frames when in an interception routine."" into 13	9 years ago
George Joseph	6be5d8de0d	Revert "AGI: Only defer frames when in an interception routine." ... This reverts commit 5c10091f3d. Multiple testsuite failures were detected after the fact. Change-Id: I397a841acc17ae230c512449cd6bed89d2ef3b73	9 years ago
George Joseph	dfcb2b6c24	Merge "res_pjsip_session: Do not call session supplements when it's too late." into 13	9 years ago
Mark Michelson	e043d1a55c	res_pjsip_session: Do not call session supplements when it's too late. ... res_pjsip_sesssion was hooking into transaction and invite state changes. One of the reasons for doing so was due to the PJSIP_EVENT_TX_MSG event. The idea was that we were hooking into the message sending process, and so we should call session supplements to alter the outgoing message. In reality, this event was meant to indicate that the message either a) had already been sent, or b) required a DNS lookup and would be sent when the DNS query completed. In case (a), this meant we were altering an already-sent request/response for no reason. In case (b), this potentially meant we could be trying to alter a request/response at the same time that the DNS resolution completed. In this case, it meant we might be stomping on memory being used by the thread actually sending the message. This caused potential crashes and memory corruption. This patch removes the calls to session supplements from the case where the PJSIP_EVENT_TX_MSG event occurs. In all of these cases, trying to alter the message at this point is too late, and it can cause nothing but harm to try to do it. Because there were no longer any calls to the handle_outgoing() function, it has been removed. Change-Id: Ibcc223fb1c3a237927f38754e0429e80ee301e92	9 years ago
Mark Michelson	5c10091f3d	AGI: Only defer frames when in an interception routine. ... AGI recently was modified to defer important frames. This was because when AGI was used in a connected line interception routine, the resulting connected line frame would end up getting discarded by the AGI. However, this caused bad behavior in other cases. Specifically, during a transfer, if someone attempted to manually set the Caller ID on a channel in an AGI, the deferred connected line frame would end up overwriting what had been manually set in the AGI. Since the initial issue was specific to interception routines, this change removes the manual frame deferral from AGI and instead uses the new frame deferral API in interception routines. ASTERISK-26343 #close Reported by Morton Tryfoss Change-Id: Iab7d39436d0ee99bfe32ad55ef91e9bd88db4208	9 years ago
Joshua Colp	77e56bc2e0	Merge "stasis_recording/stored: remove calls to deprecated readdir_r function." into 13	9 years ago
Joshua Colp	dc04c1725f	Merge "res_stasis: Don't unsubscribe from a NULL bridge." into 13	9 years ago
Joshua Colp	58df0ccc0e	Merge "res_http_websocket: Increase the buffer size for non-LOW_MEMORY systems" into 13	9 years ago
Matt Jordan	e79acaeb75	res_http_websocket: Increase the buffer size for non-LOW_MEMORY systems ... Not surprisingly, using Respoke (and possibly other systems) it is possible to blow past the 16k limit for a WebSocket packet size. This patch bumps it up to 32k, which, at least for Respoke, is sufficient. For now. Because 32k is laughable on a LOW_MEMORY system (as is 16k, for that matter), this patch adds a LOW_MEMORY directive that sets the buffer to 8k for systems who have asked for their reduced memory availability to be considered. Change-Id: Id235902537091b58608196844dc4b045e383cd2e	9 years ago
Matt Jordan	7a83196985	res_stasis: Set a video source mode on Stasis created bridges ... When a bridge is created via ARI (through res_stasis), no video source mode is set by default. As a result, any endpoint sending video media won't ever see any video reflected back to it. This patch defaults a bridge to a 'follow the talker' video mode. Further work can be done to add routes that allow for the video mode to be controlled through the /bridges resource. Change-Id: I7e9d530a5d7a97a4524a9ee4e468e1a6b3443866	9 years ago
Kevin Harwell	bd4d7d8ad0	stasis_recording/stored: remove calls to deprecated readdir_r function. ... The readdir_r function has been deprecated and should no longer be used. This patch removes the readdir_r dependency (replaced it with readdir) and also moves the directory search code to a more centralized spot (file.c) Also removed a strict dependency on the dirent structure's d_type field as it is not portable. The code now checks to see if the value is available. If so, it tries to use it, but defaults back to using the stats function if necessary. Lastly, for most implementations of readdir it *should* be thread-safe to make concurrent calls to it as long as different directory streams are specified. glibc falls into this category. However, since it is possible that there exist some implementations that are not safe, locking has been added for those other than glibc. ASTERISK-26412 ASTERISK-26509 #close Change-Id: Id8f54689b1e2873e82a09d0d0d2faf41964e80ba	9 years ago
Joshua Colp	3a1f9c5dab	res_stasis: Don't unsubscribe from a NULL bridge. ... A NULL bridge has special meaning in res_stasis for unsubscribing. It means that a subscription to ALL bridges should be removed. This should not be done as part of the normal subscription management in the res_stasis channel loop. ASTERISK-26468 Change-Id: I6d5bea8246dd13a22ef86b736aefbf2a39c15af0	9 years ago
Joshua Colp	18974927e5	Merge "res_pjsip_sdp_rtp: Limit number of formats to defined maximum." into 13	9 years ago
Joshua Colp	5f188bb7a8	res_pjsip_sdp_rtp: Limit number of formats to defined maximum. ... The res_pjsip_sdp_rtp module did not restrict the number of formats added to a media stream in the SDP to the defined limit. If allow=all was used with additional loaded codecs this could result in the next media stream being overwritten some. This change restricts the module to limit it to the defined maximum and also increases the maximum in our bundled pjproject. ASTERISK-26541 #close Change-Id: I0dc5f59d3891246cafa2f3df5ec406f088559ee8	9 years ago
Matt Jordan	29692d4aa4	res/stasis: Add CLI commands for displaying/debugging ARI apps ... This patch adds three new CLI commands: - ari show apps: list the registered ARI applications - ari show app: show detailed information about an ARI application - ari set debug: dump events being sent to an ARI application Note that while these CLI commands live in the res_stasis module, we use the 'ari' family for these commands. This was done as most users of Asterisk aren't aware of the semantic differences between ARI and res_stasis, and some 'ari' CLI commands already exist. ASTERISK-26488 #close Change-Id: I51ad6ff0cabee0d69db06858c13f18b1c513c9f5	9 years ago
Joshua Colp	6012db0e05	Merge "res_pjsip_sdp_rtp: Fix address family of explicit media_address." into 13	9 years ago
Joshua Colp	e8a3af2629	Merge "pjsip: Fix a few media bugs with reinvites and asymmetric payloads." into 13	9 years ago
Joshua Colp	675c71ae8c	res_pjsip_caller_id: Fix crash on session timers UPDATE on inbound calls. ... The res_pjsip_caller_id module wrongly assumed that a saved From header would always exist on sessions. This is true until an inbound call is received and a session timer causes an UPDATE to be sent. In this case there will be no saved From header and a crash will occur. This change makes it fall back to the From header of the outgoing request if no saved From header is present. ASTERISK-26307 #close Change-Id: Iccc3bc8d243b5ede9b81abf960292930c908d4fa	9 years ago
Joshua Colp	e0bc17edff	pjsip: Fix a few media bugs with reinvites and asymmetric payloads. ... When channel format changes occurred as a result of an RTP re-negotiation the bridge was not informed this had happened. As a result the bridge technology was not re-evaluated and the channel may have been in a bridge technology that was incompatible with its formats. The bridge is now unbridged and the technology re-evaluated when this occurs. The chan_pjsip module also allowed asymmetric codecs for sending and receiving. This did not work with all devices and caused one way audio problems. The default has been changed to NOT do this but to match the sending codec to the receiving codec. For users who want asymmetric codecs an option has been added, asymmetric_rtp_codec, which will return chan_pjsip to the previous behavior. The codecs returned by the chan_pjsip module when queried by the bridge_native_rtp module were also not reflective of the actual negotiated codecs. The nativeformats are now returned as they reflect the actual negotiated codecs. ASTERISK-26423 #close Change-Id: I6ec88c6e3912f52c334f1a26983ccb8f267020dc	9 years ago
Joshua Colp	f534f67f52	res_pjsip_sdp_rtp: Fix address family of explicit media_address. ... When an explicit media_address is provided the address family in the SDP needs to be set to reflect it. ASTERISK-26309 Change-Id: Ib9350cc91c120eb2f96f0623d3907d12af67eb79	9 years ago
Joshua Colp	2bd8af6d0b	Merge "pjsip: Support dual stack automatically." into 13	9 years ago
Joshua Colp	578e34b445	Merge "ARI: Detect duplicate channel IDs" into 13	9 years ago
Joshua Colp	bb982480d8	pjsip: Support dual stack automatically. ... This change adds support for dual stack automatically. No configuration is required and the IP address and version in the SIP messages and SDP will be automatically changed based on the transport over which the message is being sent. RTP usage has also been changed to listen on both IPv4 and IPv6 simultaneously to allow media to flow, and to allow ICE support on both simultaneously. This also allows failover between IPv6 and IPv4 to work as expected. ASTERISK-26309 #close Change-Id: I235a421d8f9a326606d861b449fa6fe3a030572d	9 years ago
Mark Michelson	eff97808fb	ARI: Detect duplicate channel IDs ... ARI and AMI allow for an explicit channel ID to be specified when originating channels. Unfortunately, there is nothing in place to prevent someone from using the same ID for multiple channels. Further complicating things, adding ID validation to channel allocation makes it impossible for ARI to discern why channel allocation failed, resulting in a vague error code being returned. The fix for this is to institute a new method for channel errors to be discerned. The method mirrors errno, in that when an error occurs, the caller can consult the channel errno value to determine what the error was. This initial iteration of the feature only introduces "unknown" and "channel ID exists" errors. However, it's possible to add more errors as needed. ARI uses this feature to determine why channel allocation failed and can return a 409 error during origination to show that a channel with the given ID already exists. ASTERISK-26421 Change-Id: Ibba7ae68842dab6df0c2e9c45559208bc89d3d06	9 years ago
Michael Walton	3c62b60e56	res_rtp_asterisk: Add ice_blacklist option ... Introduces ice_blacklist configuration in rtp.conf. Subnets listed in the form ice_blacklist = <subnet spec>, e.g. ice_blacklist = 192.168.1.0/255.255.255.0, are excluded from ICE host, srflx and relay discovery. This is useful for optimizing the ICE process where a system has multiple host address ranges and/or physical interfaces and certain of them are not expected to be used for RTP. Multiple ice_blacklist configuration lines may be used. If left unconfigured, all discovered host addresses are used, as per previous behavior. Documention in rtp.conf.sample. ASTERISK-26418 #close Change-Id: Ibee88f80d7693874fda1cceaef94a03bd86012c9	9 years ago
Matt Jordan	42cfdcd1b7	res/ari: Add the Asterisk EID field to outgoing events ... This patch adds the Asterisk EID field to all outgoing ARI events. Because this field should be added to all events as they are transmitted, it is appended to the JSON message just prior to it being handed off to the application message handler. This makes it somewhat resilient to both new events being added to ARI, as well as other potential event transport mechanisms. ASTERISK-26470 #close Change-Id: Ieff0ecc24464e83f3f44e9c3e7bd9a5d70b87a1d	9 years ago
Richard Mudgett	3c54328c57	Audit ast_json_pack() calls for needed UTF-8 checks. ... Added needed UTF-8 checks before constructing json objects in various files for strings obtained outside the system. In this case string values from a channel driver's peer and not from the user setting channel variables. * aoc.c: Fixed type mismatch in s_to_json() for time and granularity json object construction. ASTERISK-26466 Reported by: Richard Mudgett Change-Id: Iac2d867fa598daba5c5dbc619b5464625a7f2096	9 years ago
Torrey Searle	86c15db6a1	res_fax: Fix a tight race condition causing fax to crash in audio fallback ... When T.38 gets rejected and G711 failback occurs there is a period of time where neither AST_FAX_TECH_T38 nor AST_FAX_TECH_AUDIO is set, leading to a crash. Change-Id: Icc3f457b2292d48a9d7843dac0028347420cc982	9 years ago
Torrey Searle	349c34f72a	res_rtp_asterisk: Fix infinite DTMF issue when switching to P2P bridge ... If a bridge switched to P2P when a DTMF was in progress it was possible for the DTMF to continue being sent indefinitely. Change-Id: I7e2a3efe0d59d4b214ed50cd0b5d0317e2d92e29	9 years ago
Badalyan Vyacheslav	9da3489d24	res_pjsip_config_wizard: Memory leak in module_unload ... Fixed a memory leak. It removes only the first element. Added a useful feature in vector.h to remove all items under the CMP through a callback function / macro. ASTERISK-26453 #close Change-Id: I84508353463456d2495678f125738e20052da950	9 years ago
George Joseph	269ee510c9	Merge "codec_opus: Replace res_format_attr_opus with the one from codec_opus" into 13	10 years ago
George Joseph	a5af8709c8	codec_opus: Replace res_format_attr_opus with the one from codec_opus ... Preparation ASTERISK-26409 Change-Id: I9f20e7cce00c32464d9a180e81283d49d199d0a3 (cherry picked from commit 59f7662a93)	10 years ago
George Joseph	0ab443007b	build_tools: Add ability to download variants to download_externals ... Some external packages have multiple variants that apply to different builds of asterisk. The DPMA for instance has a "bundled" variant that needs to be downloaded if asterisk was configured with --with-pjproject-bundled. There are 2 ways to specify variants: If you need the user to make the decision about which variant to download, simply create multiple menuselect "member" entries like so... <member name="res_digium_phone" displayname="..snipped.."> <support_level>external</support_level> <depend>xmlstarlet</depend> <depend>bash</depend> <defaultenabled>no</defaultenabled> </member> <member name="res_digium_phone-bundled" displayname="..snipped.."> <support_level>external</support_level> <depend>xmlstarlet</depend> <depend>bash</depend> <defaultenabled>no</defaultenabled> </member> Note that the second entry has "-<variant>" appended to the name. You can then use the existing menuselect facilities to restrict which members to enable or disable. Youy probably don't want the user to enable multiple at the same time. If you want to hide the details of the variants, the better way to do it is to create 1 member with "variant" elements. <member name="res_digium_phone" displayname="..snipped.."> <support_level>external</support_level> <depend>xmlstarlet</depend> <depend>bash</depend> <defaultenabled>no</defaultenabled> <member_data> <downloader> <variants> <variant tag="bundled" condition='[[ "$PJPROJECT_BUNDLED" = "yes" ]]'/> </variants> </downloader> </member_data> </member> The condition must be a bash expression suitable for use with an "if" statement. Any environment variable can be used plus those available in makeopts. In this case, if asterisk was configured with --with-pjproject-bundled the bundled variant will be automatically downloaded. Otherwise the normal version will be downloaded. Change-Id: I4de23e06d4492b0a65e105c8369966547d0faa3e	10 years ago
Joshua Colp	10c180760c	res_odbc: Make pooling option deprecation notice more useful. ... This changes the notice for the deprecation of the old pooling options to point to the new option for doing pooling. This gives a clearer direction as to what to look into. ASTERISK-26389 #close Change-Id: I2ca9cdfdcd75aec170a7db9d5ff69a4cd25b7c10	10 years ago
zuul	177557bc00	Merge "res_pjsip_multihomed: Change Contact port to listening port." into 13	10 years ago
Richard Mudgett	cdbad152c7	res_config_odbc.c: Fix buffer size limitation creating invalid SQL. ... Creating ODBC SQL queries resulted in queries too large to fit into the supplied buffer. The resulting truncated buffer contained an invalid SQL query. * Made SQL query generation code use a thread storage buffer that can increase in size as needed. * Fixed bad multi-line warning messages. ASTERISK-26263 #close Reported by: Jeppe Ryskov Larsen Change-Id: I23f3cdd43c2dac80bed3ded4dd77d18cb17f21ae	10 years ago
Joshua Colp	449719be00	res_pjsip_multihomed: Change Contact port to listening port. ... The res_pjsip_multihomed module determines what interface and transport a request is going out on and updates the SIP message accordingly with the address information. This currently incorrectly updates the Contact header for connectionful protocols to the ephemeral connection port, instead of the bound address for the listening socket which can actually accept the connection back. If the remote side attempts to connect back on the epehemeral port it will fail. This change makes it so the port is updated to the bound port on connectionful protocols and is maintained on UDP (as there can be multiple of those). ASTERISK-26374 #close Change-Id: I50f8dab65b9f75117d73ba5f6bbcf6c9871854ab	10 years ago
zuul	11d05fc369	Merge "res_pjsip_transport_management: Convert time in log message to seconds." into 13	10 years ago
Joshua Colp	1cac856e17	rtp: Preserve timestamps on video frames. ... Currently when receiving video over RTP we store only a calculated samples on the frame. When starting the video it can take some time for this calculation to actually yield a value as it requires constant changing timestamps. As well if a video frame passes over multiple RTP packets this calculation will fail as the timestamp is the same as the previous RTP packet and the number of samples calculated will be 0. This change preserves the timestamp on the frame and allows it to pass through the core. When sending the video this timestamp is used instead of a new one being calculated. ASTERISK-26367 #close Change-Id: Iba8179fb5c14c9443aee4baf670d2185da3ecfbd	10 years ago
zuul	a5f7b07579	Merge "res_pjsip: Add ignore_uri_user_options option." into 13	10 years ago
Joshua Colp	9df4056d70	res_pjsip_transport_management: Convert time in log message to seconds. ... ASTERISK-26375 #close Change-Id: I46496af5cae41413e76d44d2068a7431279f09dc	10 years ago
zuul	3d7cbaa675	Merge "res_pjsip_messaging.c: Misc cleanups and fixes." into 13	10 years ago
Richard Mudgett	30af92e78d	res_pjsip: Add ignore_uri_user_options option. ... This implements the chan_sip legacy_useroption_parsing option but with a better name. * Made the caller-id number and redirecting number strings obtained from incoming SIP URI user fields always truncated at the first semicolon. People don't care about anything after the semicolon showing up on their displays even though the RFC allows the semicolon. ASTERISK-26316 #close Reported by: Kevin Harwell Change-Id: Ib42b0e940dd34d84c7b14bc2e90d1ba392624f62	10 years ago
Joshua Colp	7580a736bb	res_pjsip: Only invoke unidentified endpoint logic when unidentified. ... The code was incorrectly invoking the unidentified logic when an endpoint had actually been identified, causing log messages to be output. ASTERISK-26349 #close Change-Id: Id8104fc9e3d138d5e8b6f6977ecc08765fd17d4f	10 years ago
Mark Michelson	f1ffc22933	res_pjsip: Do not crash on ACKs from unknown endpoints. ... The endpoint identification PJSIP module is intended to identify which endpoint an incoming request is from. If an endpoint is not identified, then an artificial endpoint is used in its place when proceeding. The problem is that the ACK request type is an exception to the rule. The artificial endpoint is not used when processing an ACK. This results in the possibility of having a NULL endpoint being used further on. The reason ACK is an exception is an attempt not to spam security logs with unidentified requests. Presumably, you've already logged the unidentified request on the preceeding INVITE. Up until Asterisk 13.10, retrieving a NULL endpoint in this fashion didn't cause an issue. A new change in 13.10 added endpoint ACL checking shortly after endpoint identification. Because we are accessing a NULL endpoint, this ACL check resulted in a crash. The fix here is to be sure to retrieve the artificial endpoint for all request types. ACKs still do not generate unidentified request security events. ASTERISK-26264 #close Reported by nappsoft AST-2016-006 Change-Id: Ie0c795ae2d72273decb972dd74b6a1489fb6b703	10 years ago
Richard Mudgett	23d6ec7417	res_pjsip_messaging.c: Misc cleanups and fixes. ... * Eliminated RAII_VAR in get_outbound_endpoint(). * Simplify update_to() coding. However, this function can only be a NoOp because the To string can only be a URI and not a name-address formatted string. * Simplify update_from() coding. Also fixed a code path modifying the from string when the caller could still want to use the original string. * Fixed msg_data_create() incompletely removing the "pjsip:" to then add back the "sip:" string if needed. The code didn't handle the "pjsip:sip:" case because it left the colon after pjsip in the string. Change-Id: I68a09a665f6d4daa9eaa59069045ab69122e28db	10 years ago
Joshua Colp	5f19657710	res_pjsip: Allow global headers to be overridden. ... Currently when you add global headers from the dialplan both the header in the dialplan and the globally configured header are added to the resulting SIP INVITE. This change makes it so the headers in the dialplan take precedence and are the only ones added. Change-Id: I36f864298f38db3632ad503edc11267cb8ffb3ad	10 years ago
zuul	8925367291	Merge "res_pjsip_session: segfault on already disconnected session" into 13	10 years ago
Joshua Colp	89f7cd8182	Merge "build: Add download capability for external packages" into 13	10 years ago
zuul	9e874d2cc8	Merge "res_pjsip_registrar.c: Reduce stack usage in find_aor_name()." into 13	10 years ago