Some (voicemail-related) tests API symlinks beep.gsm and other files
from ast_config_AST_VAR_DIR. It should use ast_config_AST_DATA_DIR.
ASTERISK-26740 #close
Change-Id: Id49c56fb9e16df64b1a2b829693ca7601252df89
Fix the AMI PJSIPShowSubscriptionsInbound, PJSIPShowSubscriptionsOutbound,
and PJSIPShowResourceLists actions event counts. The reported counts may
not necessarily be accurate depending on what happens.
The subscriptions count would be wrong if Asterisk ever has outbound
subscriptions.
The resource list count could be wrong if a list were added or removed
during the AMI action being processed.
Change-Id: I4344301827523fa174960a42c413fd19abe4aed5
ast_loggrabber gathers log files from customizable search patterns,
optionally converts POSIX timestamps to a readable format and
tarballs the results.
Also a few tweaks were made to ast_coredumper.
Change-Id: I8bfe1468ada24c1344ce4abab7b002a59a659495
(cherry picked from commit c709152878)
QueueLog did not log ringnoanswer when the caller abandoned call
before first timeout. It was impossible to get agent membername
and ringing duration for this short calls. After some discusions
it seems that the best way is to add new event RINGCANCELED,
which is generated after caller hangup during ringing.
ASTERISK-26665
Change-Id: Ic70f7b0f32fc95c9378e5bcf63865519014805d3
It was possible for a frame to be re-inserted into a jitter buffer after it
had been removed from it. A case when this happened was if a frame was read
out of the jitterbuffer, passed to the translation core, and then multiple
frames were returned from said translation core. Upon multiple frames being
returned the first is passed on, but sebsequently "chained" frames are put
back into the read queue. Thus it was possible for a frame to go back into
the jitter buffer where this would cause problems.
This patch adds a flag to frames that are inserted into the channel's read
queue after translation. The abstract jitter buffer code then checks for this
flag and ignores any frames marked as such.
Change-Id: I276c44edc9dcff61e606242f71274265c7779587
The task processor queue reached X scheduled tasks message was originally
intended to get logged only once per task processor to prevent spamming
the log. This is no longer necessary since high and low water thresholds
can better control when the message is logged.
It is beneficial to generate the warning each time a task processor
reaches the high water level because PJSIP stops processing new requests
while any high water alert is active. Without this change you would have
to enable at least debug level 3 logging to know about a repeated alert
trigger.
* Made generate the warning message whenever a task is pushed into the
task processor that triggers the high water alert.
* Appended 'again' to the warning for a repeated high water alert trigger.
Change-Id: Iabf75a004f7edaf1e5e8c323099418e667cac999
Function CHANNEL(rtcp,all_rtt) CHANNEL(rtcp,all_loss) CHANNEL(rtcp,all_jitter)
always return 0.0 due to wrong define of macro "AST_RTP_SATA_SET" and
"AST_RTP_STAT_STRCPY".
It should compare "combined" with "stat" not "current_stat".
ASTERISK-26710 #close
Reported-by: Aaron An
Tested-by: AaronAn
Change-Id: Id4140fafbf92e2db689dac5b17d9caa009028a15
This utility allows easy manipulation of asterisk coredumps.
* Configurable search paths and patterns for existing coredumps
* Can generate a consistent coredump from the running instance
* Can dump the lock_infos table from a coredump
* Dumps backtraces to separate files...
- thread apply 1 bt full -> <coredump>.thread1.txt
- thread apply all bt -> <coredump>.brief.txt
- thread apply all bt full -> <coredump>.full.txt
- lock_infos table -> <coredump>.locks.txt
* Can tarball corefiles and optionally delete them after processing
* Can tarball results files and optionally delete them after processing
* Converts ':' in coredump and results file names '-' to facilitate
uploading. Jira for instance, won't accept file names with colons
in them.
Tested on Fedora24+, Ubuntu14+, Debian6+, CentOS6+ and FreeBSD9+[1].
[1] For *BSDs, the "devel/gdb" package might have to be installed to
get a recent gdb. The utility will check all instances of gdb
it finds in $PATH and if one isn't found that can run python, it
prints a friendly error.
Change-Id: I935d37ab9db85ef923f32b05579897f0893d33cd
(cherry picked from commit cb47b45560)
When MALLOC_DEBUG was specified, make was failing. Immediately
remaking would work. The issues was in the ordering of the make
dependencies.
Change-Id: If6030b54fc693f3179f32bfd20c6b5d5f1b3f7cd
This change implements SRV support for the IP based endpoint
identifier module. All possible addresses through SRV are looked
up and added as matches. If no SRV records are available a
fallback to normal host resolution is done. If an IP address
is provided then no SRV lookup occurs.
This is configured using the "srv_lookups" option on the
identify section and defaults to "yes".
ASTERISK-26693
Change-Id: I6b641e275bf96629320efa8b479737062aed82ac
Adds the ability for extensions to be registered to include filename and
line number so that dialplan show output can show the filename and line
number of a config file responsible for generating a given extension.
This only affects config modules that are written to use the new extension
registering functions. In this patch, that only includes pbx_config, so
extensions registered in extensions.conf and any included extension will
be shown in this manner. Extensions registered in this manner will show
the filename and line number *instead* of the registrar.
ASTERISK-26658 #close
Reported by: Jonathan R. Rose
Change-Id: Ieccc6abccdff34ed5c7da3511fd24972b8f2dd30
This feature was available in the SIP channel driver chan_sip. For example,
Asterisk is the outbound proxy and has to handle all SIP-URIs, even domains not
local to Asterisk. In that case, SIPDOMAIN is used in the Dialplan, to detect
and dial remote SIP-URIs. This change here sets the SIP destination domain of
an inbound call (SIPDOMAIN) in the SIP channel driver res_pjsip as well.
ASTERISK-26670 #close
Change-Id: I27c880dc404a3c1c6792e1ba3545475339577243
After a SIP_CODEC_INBOUND in the dialplan, do not continue with cached formats
but remember the joint format. Cached formats contain default parameters,
often create an empty fmtp line. However, a joint format might have passed
format_get_joint(.) in a res_format_attr_* module (like Opus Codec) and
contain the resulting format parameters from a SDP negotiation.
ASTERISK-26691 #close
Change-Id: I35712d98a793d4c3efdd156cec57deab9014b1dc
A while back, we changed config_site.h to set PJ_LOG_MAX_LEVEL = 6.
This allowed us to control the log level better from inside Asterisk.
An unfortunate side effect of this was that the pjsua binary and
python bindings were also compiled with log level set to 6 so whenever
a testsuite test that uses pjsua runs, it spits out 6795 lines of
debug in an instant even before the test starts. I believe this
overruns the Jenkins capture buffer and prevents the test from
properly terminating. In turn, this results in the testsuite just
hanging until the job is killed. It's more frequent on the higher
end agents because they can spit out the messages faster.
Unfortunately, the messages are all spit out before we have control
of the python pj.Lib instance where we can set logging levels so the
only alternative was to actually compile pjsua and _pjsua.so with an
overridden PJ_LOG_MAX_LEVEL. Although defining a lower max level was
done in the Makefile, the define in config_site.h had to be wrapped
with "#ifndef" so the change would take effect.
Change-Id: I2af9e7d48dde1927279c586c9c725d868fe6f3ff
The CHANNEL() dialplan function implementation for PJSIP allows
querying of PJSIP specific information. This used the channel
passed in to get the PJSIP session and associated information.
It is possible for this channel to be masqueraded and end
up as a different channel type by the time the information
request is actually acted upon.
This change retrieves the PJSIP session safely and accesses
data from it (including channel). This provides a guarantee
that the session and channel will not be altered when the
request is being acted upon.
ASTERISK-26673
Change-Id: I335e12b89e1820cafdd92b3e7526b8ba649eb7e6
When "fetch_again_at_reload" is set in config, we create now
new object and thread for each reloaded calendar (with new
configuration). Old calendar should be then unlinked, so the
old thread can exit and free memory.
ASTERISK-26683
Change-Id: Ic17fba9371c5a8b26a6bc54ea4957c13a32a343e
refer_incoming_refer_request needed to look for the "r" header as well
as the "Refer-To" header.
ASTERISK-26655 #close
patches:
refer_compact_fix.diff submitted by JoshE (license 6075)
Change-Id: I610410a99b02427ea5db887aeb454d5f12c2259f
In native_rtp_bridge_compatible_check()
* Made one variable declaration per line.
* Extracted if test assignment to make the test easier to see.
* Made long if tests easier to see the combinatorial logic.
* Added bridge id to a couple debug messages.
Change-Id: I65bc5732aa7c9a2537f062f106fbea711cf2daad
native_rtp_bridge_compatible() didn't lock the bridge channels before
checking the channels for native bridging ability. As a result, one of
the channel's native format capabilities structure got replaced out from
under the native bridge check. Use of a stale pointer to freed memory
causes bad things to happen.
MALLOC_DEBUG, DO_CRASH, and the
tests/channels/pjsip/transfers/blind_transfer/caller_direct_media
testsuite test caught this.
* Add missing channel locking in native_rtp_bridge_compatible().
Change-Id: If25fdb3ac8e85563c4857fb8216b3d9dc3d0fa53
ast_rtp_remote_address_set() could pass an uninitialized 'us' parameter to
ast_ouraddrfor(). If ast_ouraddrfor() returns an error then the 'us'
parameter may not get initialized. Thus when the code tries to save the
'us' parameter to the local address we could try to copy a ridiculous
sized memory buffer and segfault.
* Made pass an initialized 'us' parameter to ast_ouraddrfor().
* Optimized out the 'us' struct variable.
ASTERISK-26672 #close
Change-Id: I4acea5dcdf0813da2c7d3e11c2d6067d160d17dc
unicast_rtp_request() could pass an uninitialized 'us' parameter to
ast_ouraddrfor(). If ast_ouraddrfor() returns an error then the 'us'
parameter may not get initialized. Thus when the code tries to save the
'us' parameter to the local address we could try to copy a ridiculous
sized memory buffer and segfault.
* Made pass an initialized 'us' parameter to ast_ouraddrfor() and abort
the UnicastRTP channel request if it fails.
ASTERISK-26672
Change-Id: I1ef7a7c09f4da4f15dcb6de660d2bcac5f2a95c0
We access uninitialized memory when the 'ourip' parameter does not
have an initial guess to our IP address.
ASTERISK-26672
Change-Id: I35507ea1ad7455d2be188f6ccdd4add7bd150e15
Pyflake is a python (2) source checker. This patch fixes various
(mostly trivial) errors and warnings it reports.
Change-Id: Ia35c5ac61751b927814cf693994c632c412386ea
Tzafrir Cohen
Joshua Colp
zuul
Richard Mudgett
George Joseph
Martin Tomec
Kevin Harwell
Sebastian Gutierrez
Aaron An
Jonathan R. Rose
Alexander Traud
Joshua Elson