asterisk

Commit Graph

Author	SHA1	Message	Date
Nick French	37b2e68628	res_pjsip: Implement additional SIP RFCs for Google Voice trunk compatability This change implements a few different generic things which were brought on by Google Voice SIP. 1. The concept of flow transports have been introduced. These are configurable transports in pjsip.conf which can be used to reference a flow of signaling to a target. These have runtime configuration that can be changed by the signaling itself (such as Service-Routes and P-Preferred-Identity). When used these guarantee an individual connection (in the case of TCP or TLS) even if multiple flow transports exist to the same target. 2. Service-Routes (RFC 3608) support has been added to the outbound registration module which when received will be stored on the flow transport and used for requests referencing it. 3. P-Associated-URI / P-Preferred-Identity (RFC 3325) support has been added to the outbound registration module. If a P-Associated-URI header is received it will be used on requests as the P-Preferred-Identity. 4. Configurable outbound extension support has been added to the outbound registration module. When set the extension will be placed in the Supported header. 5. Header parameters can now be configured on an outbound registration which will be placed in the Contact header. 6. Google specific OAuth / Bearer token authentication (draft-ietf-sipcore-sip-authn-02) has been added to the outbound registration module. All functionality changes are controlled by pjsip.conf configuration options and do not affect non-configured pjsip endpoints otherwise. ASTERISK-27971 #close Change-Id: Id214c2d1c550a41fcf564b7df8f3da7be565bd58	7 years ago
Sean Bright	07cb13f75f	res_pjsip: Log IPv6 addresses correctly Both pjsip_tx_data.tp_info.dst_name and pjsip_rx_data.pkt_info.src_name store IPv6 addresses without enclosing brackets. This causes some log output to be confusing because it is difficult to separate the IPv6 address from a port specification. * Use pj_sockaddr_print() along with pjsip_tx_data.tp_info.dst_addr and pjsip_rx_data.pkt_info.src_addr where possible for consistent IPv6 output. * When a pj_sockaddr is not available, explicitly wrap IPv6 addresses in brackets. * When assigning pjsip_rx_data.pkt_info.src_name ourselves, make sure to also set pjsip_rx_data.pkt_info.src_addr. Change-Id: I5cfe997ced7883862a12b9c7d8551d76ae02fcf8	7 years ago
Corey Farrell	527cf5a570	Remove redundant module checks and references. This removes references that are no longer needed due to automatic references created by module dependencies. In addition this removes most calls to ast_module_check as they were checking modules which are listed as dependencies. Change-Id: I332a6e8383d4c72c8e89d988a184ab8320c4872e	7 years ago
Corey Farrell	9cfdb81e91	loader: Add dependency fields to module structures. * Declare 'requires' and 'enhances' text fields on module info structure. * Rename 'nonoptreq' to 'optional_modules'. * Update doxygen comments. Still need to investigate dependencies among modules I cannot compile. Change-Id: I3ad9547a0a6442409ff4e352a6d897bef2cc04bf	8 years ago
George Joseph	8170793be6	res_pjsip_outbound_authenticator_digest: Add context to log messages There was no context info in this module's log messages so it was impossible to toubleshoot. Added endpoint or host to all messages and added the realms in the challenge for the "No auth credentials for any realm" message. Change-Id: Ifeed2786f35fbea7d141237ae15625e472acff9b	8 years ago
Richard Mudgett	48730ae65e	res_pjsip_outbound_authenticator_digest.c: Fix spacing in warning messages. Change-Id: I573f0343c0c63a785cd4da60d57cc9f8b9ce7f49	9 years ago
Richard Mudgett	0cd0e70c16	res_pjsip_outbound_authenticator_digest.c: Fix memory pool leak. Responding to authentication challenges leaks PJSIP memory pools. The leak was introduced with a pjproject 2.5.5 API change. https://trac.pjsip.org/repos/ticket/1929 changed the API usage of pjsip_auth_clt_init() to require the new API pjsip_auth_clt_deinit() to clean up cached authentication allocations that get allocated with pjsip_auth_clt_reinit_req(). ASTERISK-26516 #close Change-Id: I4473141b8c3961d0dc91c382beb3876b3efb45c8	9 years ago
Rodrigo Ramírez Norambuena	eec010829a	AST_MODULE_INFO: Format corrections to the usages of AST_MODULE_INFO macro. Change-Id: Icf88f9f861c6b2a16e5f626ff25795218a6f2723	10 years ago
Mark Michelson	4f1db2070d	res_pjsip_outbound_registration: Don't fail on delayed processing. Odd behaviors have been observed during outbound registrations. The most common problem witnessed has been one where a request with authentication credentials cannot be created after receiving a 401 response. Other behaviors include apparently processing an incorrect SIP response. Inspecting the code led to an apparent issue with regards to how we handle transactions in outbound registration code. When a response to a REGISTER arrives, we save a pointer to the transaction and then push a task onto the registration serializer. Between the time that we save the pointer and push the task, it's possible for the transaction to be destroyed due to a timeout. It's also possible for the address to be reused by the transaction layer for a new transaction. To allow for authentication of a REGISTER request to be authenticated after the transaction has timed out, we now hold a reference to the original REGISTER request instead of the transaction. The function for creating a request with authentication has been altered to take the original request instead of the transaction where the original request was sent. ASTERISK-25020 Reported by Mark Michelson Change-Id: I756c19ab05ada5d0503175db9676acf87c686d0a	10 years ago
Mark Michelson	bd61c9300c	res_pjsip_outbound_authenticator: Increase CSeq on authed requests. The way PJSIP generates an authenticated request is to use a previous request as a template. This means that the authenticated request will have the same Call-ID, From header (including tag), and CSeq as the original request. PJSIP generates a new branch on the Via header to indicate that this is a new transaction, though. There are some SIP implementations, though, that do not notice the change in the branch and therefore will match the authed request to the original request's transaction. Since the CSeq is the same, the server will repeat the response it sent to the original request. This patch aids interoperability by increasing the CSeq of the authed request by one. ASTERISK-24845 #close Reported by: Carl Fortin Tested by: Carl Fortin Change-Id: I39c4ca52e688a9f83bcc1878371334becdc5be01	10 years ago
Kinsey Moore	86a4ce4957	PJSIP: Enforce module load dependencies This enforces that res_pjsip, res_pjsip_session, and res_pjsip_pubsub have loaded properly before attempting to load any modules that depend on them since the module loader system is not currently capable of resolving module dependencies on its own. ASTERISK-24312 #close Reported by: Dafi Ni Review: https://reviewboard.asterisk.org/r/4062/ ........ Merged revisions 425690 from http://svn.asterisk.org/svn/asterisk/branches/12 ........ Merged revisions 425691 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425700 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Mark Michelson	dcf1ad14da	Add module support level to ast_module_info structure. Print it in CLI "module show" . ASTERISK-23919 #close Reported by Malcolm Davenport Review: https://reviewboard.asterisk.org/r/3802 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419592 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Mark Michelson	b18ed67d16	Switch PJSIP auth to use a vector. Since Asterisk has a vector API now, places where arrays are manually resized don't really make sense any more. Since the auth work in PJSIP was freshly-written, it was easy to reform it to use a vector. Review: https://reviewboard.asterisk.org/r/3044 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403499 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kinsey Moore	1a0a2b3e4c	Fix realm comparison for outbound auth When generating the list of authentication credentials to pass to PJSIP, Asterisk was using the raw pointer of a pj_str_t which is not always NULL-terminated. This sometimes resulted in incorrect text for the realm and a failure to match the realm for authentication purposes which was causing the outbound nominal auth pjsip basic call test to bounce. This now uses the pj_str_t that contains the realm instead of generating a new one. Thanks to John Bigelow for helping to narrow this down. ........ Merged revisions 400863 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400864 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Mark Michelson	bbf5fbbd8c	Change how realms are handled for outbound authentication. With this change, if no realm is specified in an outbound auth section, then we will simply match the realm that was present in the 401/407 challenge. (closes issue ASTERISK-22471) Reported by George Joseph (closes issue ASTERISK-22386) Reported by Rusty Newton Patches: outbound_auth_realm_v4.patch uploaded by George Joseph (License #6322) ........ Merged revisions 399059 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399082 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Mark Michelson	517389b1e7	Give more detail regarding failures to create request with auth credentials. (issue ASTERISK-22386) ........ Merged revisions 398299 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398300 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Mark Michelson	735b30ad71	The large GULP->PJSIP renaming effort. The general gist is to have a clear boundary between old SIP stuff and new SIP stuff by having the word "SIP" for old stuff and "PJSIP" for new stuff. Here's a brief rundown of the changes: * The word "Gulp" in dialstrings, functions, and CLI commands is now "PJSIP" * chan_gulp.c is now chan_pjsip.c * Function names in chan_gulp.c that were "gulp_" are now "chan_pjsip_" * All files that were "res_sip" are now "res_pjsip" * The "res_sip" directory is now "res_pjsip" * Files in the "res_pjsip" directory that began with "sip_" are now "pjsip_" * The configuration file is now "pjsip.conf" instead of "res_sip.conf" * The module info for all PJSIP-related files now uses "PJSIP" instead of "SIP" * CLI and AMI commands created by Asterisk's PJSIP modules now have "pjsip" as the starting word instead of "sip" git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395764 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago

17 Commits (5989e0de0fe7f38837f7622827778893cfe3bcd1)