This patch fixes to situations that could cause the CEL LINKEDID_END event to
be missed.
1) During a core stop gracefully, modules are unloaded when ast_active_channels
== 0. The LINKDEDID_END event fires during the channel destructor. This means
that occasionally, the cel_* module will be unloaded before the channel is
destroyed. It seemed generally useful to wait until the refcount of all
channels == 0 before unloading, so I added a channel counter and used it in the
shutdown code.
2) During a masquerade, ast_channel_change_linkedid is called. It calls
ast_cel_check_retire_linkedid which unrefs the linkedid in the linkedids
container in cel.c. It didn't ref the new linkedid. Now it does.
Review: https://reviewboard.asterisk.org/r/1900/
........
Merged revisions 367292 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 367299 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367309 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change accommodates two methods by which calls can be directed to
a user's voicemail.
* Incoming calls can be redirected to any user's voicemail.
* Established calls can be blind transferred to any user's voicemail.
Digium phones indicate the desire to direct a call to voicemail by using
a Diversion header with a reason parameter of "send_to_vm".
This patch adds the "send_to_vm" reason as a valid redirecting reason. In
addition, chan_sip.c has been modified to update redirecting information
on the transferred channel by reading a Diversion header on a REFER request.
(closes issue AST-871)
Reported by Malcolm Davenport
Review: https://reviewboard.asterisk.org/r/1925
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367163 65c4cc65-6c06-0410-ace0-fbb531ad65f3
SSL_CTX structures were allocated but never freed. This was a bigger
issue for clients than servers since new SSL_CTX structures could be
allocated for each connection. Servers, on the other hand, typically
set up a single SSL_CTX for their lifetime.
This is solved in two ways:
1. In __ssl_setup(), if a tcptls_cfg has an ssl_ctx on it, it is
freed so that a new one can take its place.
2. A companion to ast_ssl_setup() called ast_ssl_teardown() has
been added so that servers can properly free their SSL_CTXs.
(issue ASTERISK-19278)
........
Merged revisions 367002 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 367003 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch improves the handling of call id logging significantly with regard
to transfers and adding APIs to better handle specific aspects of logging.
Also, changes have been made to chan_sip in order to better handle the creation
of callids and to enable the monitor thread to bind itself to a particular
call id when a dialog is determined to be related to a callid. It then unbinds
itself before returning to normal monitoring.
review: https://reviewboard.asterisk.org/r/1886/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366842 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is the starting point for the Asterisk 11: Who Hung Up work and provides
a framework which will allow channel drivers to report the types of hangup
cause information available in SIP_CAUSE without incurring the overhead of the
MASTER_CHANNEL dialplan function. The initial implementation only includes
cause generation for chan_sip and does not include cause code translation
utilities.
This change deprecates SIP_CAUSE and replaces its method of reporting cause
codes with the new framework. This change also deprecates the 'storesipcause'
option in sip.conf.
Review: https://reviewboard.asterisk.org/r/1822/
(Closes issue SWP-4221)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366408 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Before this patch, the predial routine executes on the ;1 channel of a
local channel pair. Executing predial on the ;1 channel of a local
channel pair is of limited utility. Any channel variables set by the
predial routine executing on the ;1 channel will not be available when the
local channel executes dialplan on the ;2 channel.
* Create ast_pre_call() and an associated pre_call() technology callback
to handle running the predial routine. If a channel technology does not
provide the callback, the predial routine is simply run on the channel.
Review: https://reviewboard.asterisk.org/r/1903/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366183 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The method ast_tvdiff_ms attempts to calculate the difference, in milliseconds,
between two timeval structs, and return the difference in a 64-bit integer.
Unfortunately, it assumes that the long tv_sec/tv_usec members in the timeval
struct are large enough to hold the calculated values before it returns. On
64-bit machines, this might be the case, as a long may be 64-bits. On 32-bit
machines, however, a long may be less (32-bits), in which case, the calculation
can overflow.
This overflow caused significant problems in MixMonitor, which uses the method
to determine if an audio factory, which has not presented audio to an audiohook,
is merely late in providing said audio or will never provide audio. In an
overflow situation, the audiohook would incorrectly determine that an audio
factory that will never provide audio is merely late instead. This led to
situations where a MixMonitor never recorded any audio. Note that this happened
most frequently when that MixMonitor was started by the ConfBridge application
itself, or when the MixMonitor was attached to a Local channel.
(issue ASTERISK-19497)
Reported by: Ben Klang
Tested by: Ben Klang
Patches:
32-bit-time-overflow-10-2012-04-26.diff (license #6283) by mjordan
(closes issue ASTERISK-19727)
Reported by: Mark Murawski
Tested by: Michael L. Young
Patches:
32-bit-time-overflow-2012-04-27.diff (license #6283) by mjordan)
(closes issue ASTERISK-19471)
Reported by: feyfre
Tested by: feyfre
(issue ASTERISK-19426)
Reported by: Johan Wilfer
Review: https://reviewboard.asterisk.org/r/1889/
........
Merged revisions 364277 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 364285 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@364287 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk has a setting for the minimum allowed DTMF. If we get shorter
DTMF tones, these will be changed to the minimum on the outbound call
leg.
(closes issue ASTERISK-19772)
Review: https://reviewboard.asterisk.org/r/1882/
Reported by: oej
Tested by: oej
Patches by: oej
Thanks to the reviewers.
1.8 branch for this patch: agave-dtmf-duration-asterisk-conf-1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@363558 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Redo ast_app_run_sub()/ast_app_exec_sub() to use a known return point so
execution will stop after the routine returns there.
(s@gosub_virtual_context:1)
* Create ast_app_exec_macro() and ast_app_exec_sub() to run the macro and
gosub application respectively with the parameter string already created.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362962 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ISDN ETSI PTP and Q.SIG (And SS7 in future) have support for reporting who
was the original redirecting party of a call.
* Added support for the original redirecting party and reason to the
REDIRECTING function and the system core as well as to the stubbed
locations in sig_pri.c.
Review: https://reviewboard.asterisk.org/r/1829/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362779 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The current Security Events Framework API only supports IPv4 when it comes to
generating security events. This patch does the following:
* Changes the Security Events Framework API to support IPV6 and updates
the components that use this API.
* Eliminates an error message that was being generated since the current
implementation was treating an IPv6 socket address as if it was IPv4.
* Some copyright dates were updated on files touched by this patch.
(closes issue ASTERISK-19447)
Reported by: Michael L. Young
Tested by: Michael L. Young
Patches:
security_events_ipv6v3.diff uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/1777/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ASTERISK-18809 eliminated the legacy macro invocation of the stdexten in
favor of the Gosub method without a means of backwards compatibility.
(issue ASTERISK-18809)
(closes issue ASTERISK-19457)
Reported by: Matt Jordan
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/1855/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@361998 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Hangup now can take a regular expression as the Channel option. If you want
to hangup multiple channels, use /regex/ as the Channel option. Existing
behavior to hanging up a single channel is unchanged, but if you pass a regex,
the manager will send you a list of channels back that were hung up.
(closes issue ASTERISK-19575)
Reported by: Mark Murawski
Tested by: Mark Murawski
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@361038 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Rename astobj2 API parameter funcname to func.
* Rename astobj2 API iterator parameter to iter.
* Update some documentation for OBJ_MULTIPLE.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360827 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Global ao2 objects must always exist after initialization because there is
no access control to obtain another reference to the global object.
It is expected that module configuration could use these new API calls to
replace an active configuration parameter object with an updated
configuration parameter object.
With these new API calls, the global object could be replaced, removed, or
referenced without the risk of someone using a stale global object
pointer.
Review: https://reviewboard.asterisk.org/r/1824/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360627 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fix AMI module reload deadlock regression from ASTERISK-18479 when it
tried to fix the race between calling an AMI action callback and
unregistering that action. Refixes ASTERISK-13784 broken by
ASTERISK-17785 change.
Locking the ao2 object guaranteed that there were no active callbacks that
mattered when ast_manager_unregister() was called. Unfortunately, this
causes the deadlock situation. The patch stops locking the ao2 object to
allow multiple threads to invoke the callback re-entrantly. There is no
way to guarantee a module unload will not crash because of an active
callback. The code attempts to minimize the chance with the registered
flag and the maximum 5 second delay before ast_manager_unregister()
returns.
The trunk version of the patch changes the API to fix the race condition
correctly to prevent the module code from unloading from memory while an
action callback is active.
* Don't hold the lock while calling the AMI action callback.
(closes issue ASTERISK-19487)
Reported by: Philippe Lindheimer
Review: https://reviewboard.asterisk.org/r/1818/
Review: https://reviewboard.asterisk.org/r/1820/
........
Merged revisions 359979 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359980 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359981 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Remove unnnecessary const from const char * const var declaration in the
ast_app_run_macro() and ast_app_run_sub() prototypes. The second const is
unnecessary.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359904 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added 'b' and 'B' options to Dial. These options will allow you to run
last-minute dialplan on the caller and callee channels while the Dial
application is executing, but before the call is started. For example you
can use the 'b' option to run dialplan on the callee channel to get the name
of the newly created channel right away.
Review: https://reviewboard.asterisk.org/r/1229/
(closes issue: ASTERISK-19548)
Reported by: Mark Murawski
Tested by: Mark Murawski, Stefan Schmidt
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359705 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r357272, astobj2 was changed to automatically enable REF_DEBUG when the
TEST_FRAMEWORK flag was enabled. Unfortunately, some compilers (gcc 4.5.1
at least) will attempt to inline ao2_iterator_destroy in handle_astobj2_test.
This by itself is not a problem; unfortunately, the compiler believes that
there is a code path wherein an object allocated on the stack will be
free'd. As warnings are treated as errors, this prevents compilation of
astobj2.
This patch works around that by adding the noinline attribue to
ao2_iterator_destroy, but only if the TEST_FRAMEWORK flag is enabled.
Preventing inlining is only needed for the test method defined in astobj2,
which is also only enabled if TEST_FRAMEWORK is enabled.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359306 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch updates the NUMLOGLEVELS define in logger.h to 32, to match the fact
that logger.c implements 32 log levels (because of the custom log level stuff).
asterisk.c uses this define to size an array of levels per remote console.
This array is modified in ast_console_toggle_loglevel(), which is called by the
"logger set level" CLI command. While the documentation for the CLI command
doesn't make it terribly obvious, you can use this CLI command to toggle a
custom log level on a remote console, as well. However, doing so led to an
invalid array index in asterisk.c.
This array is read from any time a log message is written to a console. So,
all custom log level messages resulted in a bogus read if a remote console
was connected.
........
Merged revisions 359259 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359260 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359261 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change fixes case-sensitivity for device-specific subscriptions such that
the technology identifier is case-insensitive while the remainder of the device
string is still case-sensitive. This should also preserve the original case of
the device string as passed in to the event system. CCSS is the only feature
affected as it is the only consumer of device-specific event subscriptions.
The second part of this patch addresses similar case-sensitivity issues within
CCSS itself that prevented it from functioning correctly after the fix to the
events system.
This adds a unit test to verify that the event system works as expected.
(closes issue ASTERISK-19422)
Review: https://reviewboard.asterisk.org/r/1780/
........
Merged revisions 357940 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 357941 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357942 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add the ability to specify what kind of locking an ao2 object has when it
is allocated. The locking could be one of: MUTEX, RWLOCK, or none.
New API:
ao2_t_alloc_options()
ao2_alloc_options()
ao2_t_container_alloc_options()
ao2_container_alloc_options()
ao2_rdlock()
ao2_wrlock()
ao2_tryrdlock()
ao2_trywrlock()
The OBJ_NOLOCK and AO2_ITERATOR_DONTLOCK flags have a slight meaning
change. They no longer mean that the object is protected by an external
mechanism. They mean the lock associated with the object has already been
manually obtained by one of the ao2_lock calls. This change is necessary
for RWLOCK support since they are not reentrant. Also an operation on an
ao2 container may require promoting a read lock to a write lock by
releasing the already held read lock to re-acquire as a write lock.
Replaced API calls:
ao2_t_link_nolock()
ao2_link_nolock()
ao2_t_unlink_nolock()
ao2_unlink_nolock()
with the respective
ao2_t_link_flags()
ao2_link_flags()
ao2_t_unlink_flags()
ao2_unlink_flags()
API calls to be more flexible and to allow an anticipated enhancement to
control linking duplicate objects into a container.
The changes to format.c and format_cap.c are taking advantange of the new
ao2 locking options to simplify the use of the format capabilities
containers.
Review: https://reviewboard.asterisk.org/r/1554/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357272 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Occasionally there is a need to put all objects in one container also into
another container.
Some reasons you might need to do this:
1) You need to reconfigure a container. You would do this by creating a
new container with the new configuration and ao2_container_dup the old
container into it. Then replace the old container with the new. Then
destroy the old container.
2) You need the contents of a container to remain stable while operating
on all of the objects. You would do this by creating a cloned container
of the original with ao2_container_clone. The cloned container is a
snapshot of the objects at the time of the cloning. When done, just
destroy the cloned container.
Review: https://reviewboard.asterisk.org/r/1746/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357145 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit adds GoSub alternatives to connected line, redirecting, and CCSS
macro hooks so that macro can finally be deprecated. This also adds
deprecation warnings for those features when used and in documentation.
Review: https://reviewboard.asterisk.org/r/1760/
(closes issue SWP-4256)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357013 65c4cc65-6c06-0410-ace0-fbb531ad65f3
chan_iax2 to pass in the correct types.
chan_iax2 is the only consumer for the various ast_netsock_* functions in trunk
at this point, so this feels like a safe change to make.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357005 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Currently, when using res_srtp, once the SRTP policy has been added to the
current session the policy is locked into place. Any attempt to replace an
existing policy, which would be needed if the remote endpoint negotiated a new
cryptographic key, is instead rejected in res_srtp. This happens in particular
in transfer scenarios, where the endpoint that Asterisk is communicating with
changes but uses the same RTP session.
This patch modifies res_srtp to allow remote and local policies to be reloaded
in the underlying SRTP library. From the perspective of users of the SRTP API,
the only change is that the adding of remote and local policies are now added
in a single method call, whereas they previously were added separately. This
was changed to account for the differences in handling remote and local
policies in libsrtp.
Review: https://reviewboard.asterisk.org/r/1741/
(closes issue ASTERISK-19253)
Reported by: Thomas Arimont
Tested by: Thomas Arimont
Patches:
srtp_renew_keys_2012_02_22.diff uploaded by Matt Jordan (license 6283)
(with some small modifications for this check-in)
........
Merged revisions 356604 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 356605 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356606 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If the res_calendar module was followed immediately by one of the
calendar tech modules and "core stop gracefully" was run, Asterisk
would crash.
This patch adds use count tracking for res_calendar so that it is
unloaded after the tech modules when shutting down gracefully. It
is now not possible to unload all the of the calendar modules via
"module unload res_calednar.so", but it is still possible to unload
them all via "module unload -h res_calendar.so".
Review: https://reviewboard.asterisk.org/r/1752/
........
Merged revisions 356291 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 356297 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356314 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The accessors names for the "emulate_dtmf_digit" field on the ast_channel
are misleading. Change them to ast_channel_dtmf_digit_to_emulate*.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356183 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The principle difference between libvorbisfile v1.1.2 and newer (at least
v1.2.0) is the addition of the predefined callbacks OV_CALLBACKS_xxx in
vorbis/vorbisfile.h used for ov_open_callbacks().
* Updated the configure script to detect if libvorbisfile.h declares
OV_CALLBACKS_NOCLOSE.
* Copied the declaration of OV_CALLBACKS_NOCLOSE from v1.2.0 to allow
v1.1.2 to compile.
(closes issue ASTERISK-19370)
Reported by: Jonn Taylor
........
Merged revisions 355608 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 355620 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@355621 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change permits each verbose destination (consoles, logger) to have its
own concept of what the verbosity level is. The big feature here is that
the logger will now be able to capture a particular verbosity level without
condemning each console to need to suffer that level of verbosity.
Additionally, a stray 'core set verbose' will no longer change what will go
to the log.
Review: https://reviewboard.asterisk.org/r/1599/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@355413 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Ogg/vorbis was fairly useless as a voicemail file format because it did
not implement the seek and tell format callbacks among other problems.
Since we were already using the libvorbis and libvorbisenc libraries we
can use libvorbisfile as it is also part of the vorbis library package.
* Made use the libvorbisfile to handle the ogg/vorbis file stream. The
format_ogg_vorbis.c is now mostly a wrapper around libvorbisfile.
(closes issue ASTERISK-16926)
Reported by: sque
Patches:
ogg_vorbis_use_libvorbisfile.patch (license #6108) patch uploaded by sque
........
Merged revisions 355365 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 355375 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@355376 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch removes res_ais and introduces a new module, res_corosync.
The OpenAIS project is deprecated and is now just a wrapper around
Corosync. This module provides the same functionality using the same
core infrastructure, but without the use of the deprecated components.
Technically res_ais could have been used with an AIS implementation other
than OpenAIS, but that is the only one I know of that was ever used.
Review: https://reviewboard.asterisk.org/r/1700/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354046 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Removes references to tlsbindport from http.conf.sample and manager.conf.sample
* Properly bind to port specified in tlsbindaddr, using the default port if specified.
* On a reload, properly close socket if the service has been disabled.
A note has been added to UPGRADE.txt to indicate how ports must be set for TLS.
(closes issue ASTERISK-16959)
reported by Olaf Holthausen
(closes issue ASTERISK-19201)
reported by Chris Mylonas
(closes issue ASTERISK-19204)
reported by Chris Mylonas
Review: https://reviewboard.asterisk.org/r/1709
........
Merged revisions 353770 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 353820 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353821 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When ast_channel name was opaquified, the channel search functions did not
get converted correctly. As a result ExtenSpy which uses a channel
iterator search by exten@context could never find anything.
* Updated the doxygen documentation for the search functions in channel.h.
Review: https://reviewboard.asterisk.org/r/1702/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353647 65c4cc65-6c06-0410-ace0-fbb531ad65f3
AST_AUDIOHOOK_TRIGGER_WRITE and AST_AUDIOHOOK_WANTS_DTMF were overlapping which
may have caused unintended side effects. This patch moves
AST_AUDIOHOOK_TRIGGER_WRITE, and updates AST_AUDIOHOOK_TRIGGER_MODE to reflect
the original intention.
This will affect existing modules that use these flags, so be sure to recompile
as necessary.
(closes issue ASTERISK-19246)
Reported by: feyfre
........
Merged revisions 353598 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 353599 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353600 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk's dnsmgr currently takes a pointer to an ast_sockaddr and updates it
anytime an address resolves to something different. There are a couple of
issues with this. First, the ast_sockaddr is usually the address of an
ast_sockaddr inside a refcounted struct and we never bump the refcount of those
structs when using dnsmgr. This makes it possible that a refresh could happen
after the destructor for that object is called (despite ast_dnsmgr_release
being called in that destructor). Second, the module using dnsmgr cannot be
aware of an address changing without polling for it in the code. If an action
needs to be taken on address update (like re-linking a SIP peer in the
peers_by_ip table), then polling for this change negates many of the benefits
of having dnsmgr in the first place.
This patch adds a function to the dnsmgr API that calls an update callback
instead of blindly updating the address itself. It also moves calls to
ast_dnsmgr_release outside of the destructor functions and into cleanup
functions that are called when we no longer need the objects and increments the
refcount of the objects using dnsmgr since those objects are stored on the
ast_dnsmgr_entry struct. A helper function for returning the proper default SIP
port (non-tls vs tls) is also added and used.
This patch also incorporates changes from a patch posted by Timo Teräs to
ASTERISK-19106 for related dnsmgr issues.
(closes issue ASTERISK-19106)
Review: https://reviewboard.asterisk.org/r/1691/
........
Merged revisions 353371 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 353397 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353418 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When Asterisk is used with various third-party libraries (CURL, PostgresSQL,
many others) that have the ability themselves to use OpenSSL, it is possible
for conflicts to arise in how the OpenSSL libraries are initialized and
shutdown. This patch addresses these conflicts by 'wrapping' the important
functions from the OpenSSL libraries in a new shared library that is part
of Asterisk itself, and is loaded in such a way as to ensure that *all*
calls to these functions will be dispatched through the Asterisk wrapper
functions, not the native functions.
This new library is optional, but enabled by default. See the CHANGES file
for documentation on how to disable it.
Along the way, this patch also makes a few other minor changes:
* Changes MODULES_DIR to ASTMODDIR throughout the build system, in order to
more closely match what is used during run-time configuration.
* Corrects some errors in the configure script where AC_CHECK_TOOLS was used
instead of AC_PATH_PROG.
* Adds a new variable for linker flags in the build system (DYLINK), used for
producing true shared libraries (as opposed to the dynamically loadable
modules that the build system produces for 'regular' Asterisk modules).
* Moves the Makefile bits that handle installation and uninstallation of the
main Asterisk binary into main/Makefile from the top-level Makefile.
* Moves a couple of useful preprocessor macros from optional_api.h to
asterisk.h.
Review: https://reviewboard.asterisk.org/r/1006/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353317 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A long time ago, in a land far far away, we added "asterisk/ast_version.h",
which provides the ast_get_version() and ast_get_version_num() functions. These
were added so that modules that needed the version information for the Asterisk
instance they were loaded in could actually get it (as opposed the version that
they were compiled against). We changed everything in the tree to use the
new mechanism (although later main/test.c was added using the old method).
However, the old mechanism was never removed, and as a result, new code is
still trying to use it.
This commit removes asterisk/version.h and replaces it with a header that
will generate a compile-time error if you try to use it (the error message
tells you which header you should use instead). It also removes the Makefile
and build_tools bits that generated the file, and it updates main/test.c to
use the 'proper' method of getting the Asterisk version information.
This is an API change and thus is being committed for trunk only, but it's
a fairly minor one and definitely improves the situation for out-of-tree
modules.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352626 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Continue channel opaque-ification by wrapping all of the stringfields.
Eventually, we will restrict what can actually set these variables, but
the purpose for now is to hide the implementation and keep people from
adding code that directly accesses the channel structure. Semantic
changes will follow afterward.
Review: https://reviewboard.asterisk.org/r/1661/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352348 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch addresses two issues in ConfBridge and the channel bridge layer:
1. It fixes a race condition wherein the bridge channel could be hung up
2. It removes the deadlock avoidance from the bridging layer and makes the
bridge_pvt an ao2 ref counted object
Patch by David Vossel (mjordan was merely the commit monkey)
(issue ASTERISK-18988)
(closes issue ASTERISK-18885)
Reported by: Dmitry Melekhov
Tested by: Matt Jordan
Patches: chan_bridge_cleanup_v.diff uploaded by David Vossel (license 5628)
(closes issue ASTERISK-19100)
Reported by: Matt Jordan
Tested by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1654/
........
Merged revisions 350550 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350551 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are many benefits to making the ast_channel an opaque handle, from
increasing maintainability to presenting ways to kill masquerades. This patch
kicks things off by taking things a field at a time, renaming the field to
'__do_not_use_${fieldname}' and then writing setters/getters and converting the
existing code to using them. When all fields are done, we can move ast_channel
to a C file from channel.h and lop off the '__do_not_use_'.
This patch sets up main/channel_interal_api.c to be the only file that actually
accesses the ast_channel's fields directly. The intent would be for any API
functions in channel.c to use the accessor functions. No more monkeying around
with channel internals. We should use our own APIs.
The interesting changes in this patch are the addition of
channel_internal_api.c, the moving of the AST_DATA stuff from channel.c to
channel_internal_api.c (note: the AST_DATA stuff will have to be reworked to
use accessor functions when ast_channel is really opaque), and some re-working
of the way channel iterators/callbacks are handled so as to avoid creating fake
ast_channels on the stack to pass in matching data by directly accessing fields
(since "name" is a stringfield and the fake channel doesn't init the
stringfields, you can't use the ast_channel_name_set() function). I went with
ast_channel_name(chan) for a getter, and ast_channel_name_set(chan, name) for a
setter.
The majority of the grunt-work for this change was done by writing a semantic
patch using Coccinelle ( http://coccinelle.lip6.fr/ ).
Review: https://reviewboard.asterisk.org/r/1655/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350223 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit removes the V.21 preamble detection code previously added to the
generic DSP implementation in Asterisk, and instead enhances the res_fax module
to be able to utilize V.21 preamble detection functionality made available by
FAX technology modules. This commit also adds such support to res_fax_spandsp,
which uses the Spandsp modem tone detection code to do the V.21 preamble
detection.
There should be no functional change here, other than much more reliable V.21
preamble detection (and thus T.38 gateway initiation).
........
Merged revisions 349248 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349249 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, res_musiconhold existed at the same module priority level
as the timing sources that it depends on. This would cause a problem when
music on hold was reloaded, as the timing source could be changed after
res_musiconhold was processed. This patch adds a new module priority level,
AST_MODPRI_TIMING, that the various timing modules are now loaded at. This
now occurs before loading other resource modules, such that the timing source
is guaranteed to be set prior to resolving the timing source dependencies.
(closes issue ASTERISK-17474)
Reporter: Luke H
Tested by: Luke H, Vladimir Mikhelson, zzsurf, Wes Van Tlghem, elguero, Thomas Arimont
Patches:
asterisk-17474-dahdi_timing-infinite-wait-fix_v3_branch-1.8.diff uploaded by elguero (License #5026)
asterisk-17474-dahdi_timing-infinite-wait-fix_v3_branch-10.diff uploaded by elguero (License #5026)
asterisk-17474-dahdi_timing-infinite-wait-fix_v3.diff uploaded by elguero (License #5026)
Review: https://reviewboard.asterisk.org/r/1578/
........
Merged revisions 349194 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 349195 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349196 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Chan_sip gives a dialog reference to the extension state callback and
assumes that when ast_extension_state_del() returns, the callback cannot
happen anymore. Chan_sip then reduces the dialog reference count
associated with the callback. Recent changes (ASTERISK-17760) have
resulted in the potential for the callback to happen after
ast_extension_state_del() has returned. For chan_sip, this could be very
bad because the dialog pointer could have already been destroyed.
* Added ast_extension_state_add_destroy() so chan_sip can account for the
sip_pvt reference given to the extension state callback when the extension
state callback is deleted.
* Fix pbx.c awkward statecbs handling in ast_extension_state_add_destroy()
and handle_statechange() now that the struct ast_state_cb has a destructor
to call.
* Ensure that ast_extension_state_add_destroy() will never return -1 or 0
for a successful registration.
* Fixed pbx.c statecbs_cmp() to compare the correct information. The
passed in value to compare is a change_cb function pointer not an object
pointer.
* Make pbx.c ast_merge_contexts_and_delete() not perform callbacks with
AST_EXTENSION_REMOVED with locks held. Chan_sip is notorious for
deadlocking when those locks are held during the callback.
* Removed unused lock declaration for the pbx.c store_hints list.
(closes issue ASTERISK-18844)
Reported by: rmudgett
Review: https://reviewboard.asterisk.org/r/1635/
........
Merged revisions 348940 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 348952 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@348953 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During testing, it was discovered that there were a number of side effects
introduced by r346391 and subsequent check-ins related to it (r346429,
r346617, and r346655). This included the /main/stdtime/ test 'hanging',
as well as the remote console option failing to receive the appropriate output
after a period of time.
I only backed out the changes to main/ and utils/, as this was adequate
to reverse the behavior experienced.
(issue ASTERISK-18974)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@347997 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a caller sends DTMF while the SayUnixTime application is saying the time, The call
would jump to the next extension much like it does during Background(). This patch adds
option 'j' to SayUnixTime which when used employs the old behavior. Also, this patch
allows arguments to sayunixtime to not be used as empty strings in the case of something
like 'sayunixtime(,,,j)' or 'sayunixtime(,,pattern).
(closes issue ASTERISK-16675)
Reported by: jlpedrosa
Patches:
patch_SayUnixTime_noJump.patch uploaded by jlpedrosa (license 5959)
Review: https://reviewboard.asterisk.org/r/956/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@347866 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Update the doubly linked list implementation. Now safe traversing can
insert before and after the current node when traversing in either
direction.
Updated the linked lists unit test test_linkedlist to also test doubly
linked lists. The old test_dlinkedlist requires a manual check of results
and probably should be removed.
Review: https://reviewboard.asterisk.org/r/1569/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@347110 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The STUN socket must remain open between polls or the external address
seen by the STUN server is likely to change. However, if the STUN request
poll fails then the STUN server address needs to be re-resolved and the
STUN socket needs to be closed and reopened.
* Re-resolve the STUN server address and create a new socket if the STUN
request poll fails.
* Fix ast_stun_request() return value consistency.
* Fix ast_stun_request() to check the received packet for expected message
type and transaction ID.
* Fix ast_stun_request() to read packets until timeout or an associated
response packet is found. The stun_purge_socket() hack is no longer
required.
* Reduce ast_stun_request() error messages to debug output.
* No longer pass in the destination address to ast_stun_request() if the
socket is already bound or connected to the destination.
(closes issue ASTERISK-18327)
Reported by: Wolfram Joost
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/1595/
........
Merged revisions 346700 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 346701 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@346709 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Cleaning up chan_sip/tcptls file descriptor closing.
This patch attempts to eliminate various possible instances of undefined behavior caused
by invoking close/fclose in situations where fclose may have already been issued on a
tcptls_session_instance and/or closing file descriptors that don't have a valid index
for fd (-1). Thanks for more than a little help from wdoekes.
(closes issue ASTERISK-18700)
Reported by: Erik Wallin
(issue ASTERISK-18345)
Reported by: Stephane Cazelas
(issue ASTERISK-18342)
Reported by: Stephane Chazelas
Review: https://reviewboard.asterisk.org/r/1576/
........
Merged revisions 346564 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 346565 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@346566 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch attempts to eliminate various possible instances of undefined behavior caused
by invoking close/fclose in situations where fclose may have already been issued on a
tcptls_session_instance and/or closing file descriptors that don't have a valid index
for fd (-1). Thanks for more than a little help from wdoekes.
(closes issue ASTERISK-18700)
Reported by: Erik Wallin
(issue ASTERISK-18345)
Reported by: Stephane Cazelas
(issue ASTERISK-18342)
Reported by: Stephane Chazelas
Review: https://reviewboard.asterisk.org/r/1576/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@346525 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r346349 | dvossel | 2011-11-28 18:00:11 -0600 (Mon, 28 Nov 2011) | 10 lines
Fixes memory leak in message API.
The ast_msg_get_var function did not properly decrement
the ref count of the var it retrieves. The way this is
implemented is a bit tricky, as we must decrement the var and then
return the var's value. As long as the documentation for the
function is followed, this will not result in a dangling pointer as
the ast_msg structure owns its own reference to the var while it
exists in the var container.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@346350 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Terry Wilson
Mark Michelson
Jonathan Rose
Richard Mudgett
Kinsey Moore
Russell Bryant
Matthew Jordan
Olle Johansson
Michael L. Young
Mark Murawki
Sean Bright
Joshua Colp
Walter Doekes
Tilghman Lesher
Kevin P. Fleming
David Vossel