The type value extracted from stasis message data in channel_hangup_handler_cb
isn't compared against the valid values "run", "pop" and "push". Thus the
manager events HangupHandlerPush, HangupHandlerPop and HangupHandlerRun are
never thrown.
This regression was introduced by ASTERISK_21462.
ASTERISK-28252
Change-Id: I9956e35e18da1873113644df1ddc3c7cd37bf524
A bug in GCC causes TEST_CEL to return failure under the following
conditions:
1. TEST_FRAMEWORK on
2. DONT_OPTIMIZE off
3. Fedora and Ubuntu
4. GCC 8.2.1
5. Test name: test_cel_dial_pickup
6. There must exist a certain combination of multithreading.
The bug affects arithmetic calculations when the optimization level
is bigger than O1 and the -fpartial-inline flag is on. Provided these
conditions, function ast_str_to_lower() fails to convert to lower case
due to said function being of type force_inline. The solution is to
remove the "force_inline" type declaration from function ast_str_to_lower()
Change-Id: Ied32e0071f12ed9d5f3b4cdd878b2532a1c769d7
You can now define an "aliases" context in voicemail.conf
whose entries point to actual mailboxes. These can be used anywhere
the mailbox is specified.
Example:
[general]
aliasescontext = myaliases
[default]
1234 = yadayada
[myaliases]
4321@devices = 1234@default
Now you can use 4321@devices to refer to the 1234@default mailbox.
This can be useful to provide channel drivers with constant
mailbox specifications such as <extension>@devices leaving
app_voicemail to control exactly which mailbox the alias points to.
Now, only voicemail has to be reloaded to make changes instead of
individual channel drivers which are usually more expensive to
reload.
Change-Id: I395b9205c91523a334fe971be0d1de4522067b04
When a reliable transport is shutdown it's possible for the pjsip registrar
resource shutdown handler to get called multiple times. If this happens and one
of the threads is taking "too long" (slow database call for instance) then the
others get blocked waiting to delete.
Since it only takes one to delete the contact then the other threads should be
able to continue on if one of the threads is currently "deleting". This patch
makes it so now when a thread enters the shutdown handler it checks to see if a
thread is currently already "deleting". If so, then the thread does not attempt
to get the lock, and instead continues on thus avoiding the blockage.
ASTERISK-28213 #close
Change-Id: I7563ca596312b1dff4f3ab41483e89fe2862328a
Fixed#2172: Avoid double reference counter decrements in
timer in the scenario of race condition between
pj_timer_heap_cancel() and pj_timer_heap_poll().
Change-Id: If000e9438c83ac5084b678eb811e902c035bd2d8
To avoid the stream name collide if there're more than one video track
in one client. If client has multi video tracks, the name of ast_stream
which represents each video track may be the same. Use the MSID:LABEL
here because it's identifiable.
ASTERISK-28196 #close
Reported-by: xiemchen
Change-Id: Ib62b2886e8d3a30e481d94616b0ceaeab68a870b
This ensures that Asterisk responds properly to frames received from a
client with opcode 8 (CLOSE) by echoing back the status code in its own
CLOSE frame.
Handling of the CLOSE opcode is moved up with the rest of the opcodes so
that unmasking gets applied. The payload is no longer returned to the
caller, but neither ARI nor the chan_sip nor pjsip made use of the
payload, which is a good thing since it was masked.
ASTERISK-28231 #close
Change-Id: Icb1b60205fc77ee970ddc91d1f545671781344cf
The transport management code that checks for idle connections keeps a
reference to PJSIP's transport for IDLE_TIMEOUT milliseconds (32000 by
default). Because of this, if the transport is closed before this
timeout, the idle checking code will keep the transport from actually
being shutdown until the timeout expires.
Rather than passing the AO2 object to the scheduler task, we just pass
its key and look it up when it is time to potentially close the idle
connection. The other transport management code handles cleaning up
everything else for us.
Additionally, because we use the address of the transport when
generating its name, we concatenate an incrementing ID to the end of the
name to guarantee uniqueness.
Related to ASTERISK~28231
Change-Id: I02ee9f4073b6abca9169d30c47aa69b5e8ae9afb
If the Monitor is started with the i option the read_stream will be
NULL. One code path in channel.c checks if write_stream is set but than
uses read_stream instead causing a segfault.
ASTERISK-28249
Change-Id: I1bae9126537be54895c7fea2d08dd9488d8cc525
Previously both AMI and ARI used a default route on
their stasis message router to handle some of the
messages for publishing out their respective
connection. This caused messages to be given to
their subscription that could not be formatted
into AMI or JSON.
This change adds an API call to the stasis message
router which allows a default route to be set as well
as formatters that the default route is expecting.
This allows both AMI and ARI to specify that their
default route only wants messages of their given
formatter. By doing so stasis can more intelligently
filter at publishing time so that they do not receive
messages which will not be turned into AMI or JSON.
ASTERISK-28244
Change-Id: I65272819a53ce99f869181d1d370da559a7d1703
When --enable-dev-mode is used, pjsip_tpmgr_receive_packet() will assert
if passed a payload length of 0, so treat empty frames as if we didn't
receive them.
Change-Id: I9c5fdccd89cc8d2f3ed7e3ee405ef0fc78178f48
During Bridging of two channels if masquerade operation is performed on a
channel (clone channel) which was created with endpoint details
(ast_channel_alloc_with_endpoint()) and the original channel which is created
without endpoint details (ast_channel_alloc()) then both the channels must
exchange their endpoint details or else after masquerade when clone channel
is being destroyed the endpoint cleanup callbacks will be destroyed too and
after call completion unique_id of original channel will still be there in
ast_endpoint structure's channel_ids container.
ASTERISK-28197
Change-Id: I97ce73da390af20fd082fb09d722a6fe9cb2f39d
The commit I2f97ebfa79969a36a97bb7b9afd5b6268cf1a07d removed sending out
the ContactStatus AMI event when a contact is updated.
Thist change broke things which rely on old behavior.
This patch adds a new PJSIP global configuration option
'send_contact_status_on_update_registration' to be able to preserve old
ContactStatus behavior.
By default new behavior, i.e. the ContactStatus event will not be sent when a
device refreshes its registration.
Change-Id: I706adf7584e7077eb6bde6d9799ca408bc82ce46
For video streams it was possible for the abs-send-time information
to be placed into RTP streams even if not negotiated. Depending on
the endpoint in use this could cause video to not flow.
We now only enable abs-send-time for negotiation if WebRTC is enabled.
ASTERISK-28230
Change-Id: I0eb682302f8da3a4ea3c42e839208d55f825ed0c
This prevents use-after-scope issues when unwinding the stack,
which happens in reverse order. The varname variable needs to
remain alive for the destruction to be able to access it.
Issue was found using clang + address-sanitizer.
ASTERISK-28232 #close
Change-Id: I00811c34ae910836a5fb6d22304528aef92624db
The remote side may start a new stream when renegotiating RTP.
Need to reset the DTMF last sequence number and the timestamp
of the last END packet on RTP renegotiation.
If the new time stamp is lower then the timestamp of the last DTMF END packet
the asterisk drops all DTMF frames as out of order.
This bug was caught using Cisco ip-phone SPA5XX and codec g722.
On SIP session update the SPA50X resets stream and a new timestamp is twice
smaller then the previous.
ASTERISK-28162 #close
Change-Id: Ic72b4497e74d801b27a635559c1cf29c16c95254
If a voicemail is marked "urgent" then the VM_MESSAGEFILE channel variable is
not updated correctly since urgent messages are in a different directory. The
fix is to update the channel variable when the path to the urgent message is
created.
ASTERISK-28225
Change-Id: I8efbace06e6122ea0793f7bdb073d4378e8274ca
When using the 'b' option to Queue with a queue that was not configured
for ring all a crash would occur as the wrong pointer would be used.
ASTERISK-28218
Change-Id: If1390f64e321047dff24fd2410c95dde74904980
An int64_t is not likely the same size as a long.
* Changed the int64_t values in the statistics structs to longs so casting
is not necessary when generating the formatted CLI output. The offending
members did not need to be int64_t anyway as they were only set by an int
type variable which was already truncating bits.
* Reordered the statistics structs to reduce potential padding bytes.
Change-Id: Ic090a070e9dc4ca650ebdb9c01ed50a581289962
This reverts commit 5ec6d2c33e.
This commit caused issues with polling when combined with
the revert commit "Revert "app_voicemail: Remove need to subscribe to stasis"
ASTERISK-28222
Reported by: abelbeck
Change-Id: I1e83a433e4202574181bc128dce876ef24936a52
In order to get a dump of the running process, we need to find the
pid of the main asterisk process. This can be tricky if there are
also instances of "asterisk -r" running or if an alternate location
for asterisk.conf was specified on the command line with the -C
option that also specified an alternation location for the pid file.
So now...
1. We find the asterisk executable with "which" or the --asterisk-bin
command line option.
2. If there's only 1 process with an executable path that matches,
we use that pid. If not...
3. We try "<asterisk-bin> -rx 'core show settings'" and parse the
output to find the pidfile, then read that for the pid. If that
didn't work...
4. We get a list of all the pids matching <asterisk-bin> and look
in /proc/<pid>/cmdline for a -C argument and retry the "core show
settings" using the same -C option. We can't parse the output
of "ps" to get the -C path because it may contain spaces. The
contents of /proc/<pid>/cmdline are delimited by NULLs. For BSDs
we may have to mount /proc first. :(
ASTERISK-28221
Reported by: Andrew Nagy
Change-Id: I8aa1f3f912f949df2b5348908803c636bde1d57c
The backtrace library bfd.h include file does not get the sizes of
pointers and ints right on some platforms. On my old test box the size
of bfd_vma is 8 while the size of a pointer is 4. gcc on the box
complains of the integer casting to/from pointers size mismatch.
* uintptr_t to the rescue by doing an appropriate two stage cast.
Change-Id: Icb2621583f50c8728de08a3c824d95fe53cc45d0
The free_user function was automatically deleting the stasis mailbox
state but this only makes sense when the mailbox is actually
deleted, not just the structure freed. This was causing issues
where leave_voicemail would publish the mwi message to stasis and
delete the state before the message could be processed by
res_pjsip_mwi.
* Removed the delete of state from free_user().
* Created a new free_user_final() function that both frees the data
structure and deletes the state. This function is only called
during module load/unload where it's appropriate to delete the
state.
ASTERISK-28215
Change-Id: I305e8b3c930e9ac41d901e5dc8a58fd7904d98dd
All of the fields that were removed were no longer referenced except for
'lastrxts' and 'rxseqno' which were only ever written to.
Change-Id: I5a5d31eb33e97663843698f58d0d97f22a76627c
The profile-iop octet (the 2nd) of profile-level-id can be zero
according to RFC 6184 Section 8.1. So we ignore its value when deciding
to include profile-level-id in the outgoing SDP.
ASTERISK-27959 #close
Reported by: David Kuehling
Change-Id: Id28cd916a3d7748058fe9609b585d07d9e243f73
This is how features behaved up through Asterisk 11, but was changed
when the new bridging framework was implemented in Asterisk 12.
Reported by rrittgarn in #asterisk.
Change-Id: I72cf86223947a8118c75f46e2c603dbc11e3125b
Currently the file sound_only_person is not played when a marked
user (with announce_only_user=yes) joins an empty conference.
This patch fixes it.
ASTERISK-28201 #close
Change-Id: I85b67687e6b220939c3af8091d83a70a7b174cf4
This change adds statistics gathering to Stasis topics,
subscriptions, and message types. These can be viewed using
CLI commands and provide insight into how Stasis is used
and how long certain operations take to execute.
These are only available when Asterisk is compiled in
developer mode and do not have any impact under normal
operation.
ASTERISK-28117
Change-Id: I94411b53767f89ee01714daaecf0c2f1666e863f
Gerald Schnabel
Chris-Savinovich
George Joseph
Kevin Harwell
Xiemin Chen
Joshua C. Colp
Jeremy Lainé
Sean Bright
Valentin Vidic
mohitdhiman
Alexei Gradinari
Diederik de Groot
Friendly Automation
Bryan Boatright
Richard Mudgett
Corey Farrell