3437 Commits (2eaeea690d14a2c9b8eb962a021a957abdb4444d)

Author	SHA1	Message	Date
Joshua Colp	2eaeea690d	res_pjsip_registrar_expire: Fix race condition at shutdown. ... When shutting down, the PJSIP sorcery is destroyed. The registrar expiration module queries the PJSIP sorcery to determine what to expire. As there was no synchronization between termination of the expiration thread and the unloading of the module it was possible for the thread to try to access the PJSIP sorcery after it had been destroyed. This change ensures that the thread is shut down before allowing the module to be considered unloaded. Change-Id: I69fd239edbaaf160c2d37ae00d3ac06e5596fe8b	11 years ago
Joshua Colp	3e5672d843	res_pjsip: Fix configuration setting of "regcontext". ... Due to a merge problem two options were swapped causing the regcontext setting to not get set. Change-Id: Icb33edc668e7357bacbaec2861a6b5ac64edaff1	11 years ago
Joshua Colp	97db0ca884	Merge "res_pjsip: Handle deferred SDP hold/unhold properly."	11 years ago
Joshua Colp	72ef79dc2d	Merge "ARI: Add method to Dial a created channel."	11 years ago
Joshua Colp	3b71f09bb7	Merge "ARI: Add method to create a new channel."	11 years ago
Mark Michelson	abbb2edd4c	ARI: Add method to Dial a created channel. ... This adds a new ARI method that allows for you to dial a channel that you previously created in ARI. By combining this with the create method for channels, it allows for a workflow where a channel can be created, manipulated, and then dialed. The channel is under control of the ARI application during all stages of the Dial and can even be manipulated based on channel state changes observed within an ARI application. The overarching goal for this is to eventually be able to add a dialed channel to a Stasis bridge earlier than the "Up" state. However, at the moment more work is needed in the Dial and Bridge APIs in order to facilitate that. ASTERISK-25889 #close Change-Id: Ic6c399c791e66c4aa52454222fe4f8b02483a205	11 years ago
Mark Michelson	dd48d60c5b	ARI: Add method to create a new channel. ... This adds a new ARI method to the channels resource that allows for the creation of a new channel. The channel is created and then placed into the specified Stasis application. This is different from the existing originate method that creates a channel, dials it, and then places the answered channel into the dialplan or a Stasis application. This method does not attempt to call the channel at all. Dialing is left as a later step after channel creation. This allows for pre-dialing channel manipulation if desired. ASTERISK-25889 Change-Id: I3c96a0aba914b08e39f6256371a5bd4c92cbded8	11 years ago
Mark Michelson	a098251e7e	res_pjsip: Handle deferred SDP hold/unhold properly. ... Some SIP devices indicate hold/unhold using deferred SDP reinvites. In other words, they provide no SDP in the reinvite. A typical transaction that starts hold might look something like this: * Device sends reinvite with no SDP * Asterisk sends 200 OK with SDP indicating sendrecv on streams. * Device sends ACK with SDP indicating sendonly on streams. At this point, PJMedia's SDP negotiator saves Asterisk's local state as being recvonly. Now, when the device attempts to unhold, it again uses a deferred SDP reinvite, so we end up doing the following: * Device sends reinvite with no SDP * Asterisk sends 200 OK with SDP indicating recvonly on streams * Device sends ACK with SDP indicating sendonly on streams The problem here is that Asterisk offered recvonly, and by RFC 3264's rules, if an offer is recvonly, the answer has to be sendonly. The result is that the device is not taken off hold. What is supposed to happen is that Asterisk should indicate sendrecv in the 200 OK that it sends. This way, the device has the freedom to indicate sendrecv if it wants the stream taken off hold, or it can continue to respond with sendonly if the purpose of the reinvite was something else (like a session timer refresher). The fix here is to alter the SDP negotiator's state when we receive a reinvite with no SDP. If the negotiator's state is currently in the recvonly or inactive state, then we alter our local state to be sendrecv. This way, we allow the device to indicate the stream state as desired. ASTERISK-25854 #close Reported by Robert McGilvray Change-Id: I7615737276165eef3a593038413d936247dcc6ed	11 years ago
Joshua Colp	784fb43f43	res_http_websocket: Make core supported. ... Websockets are a core part of ARI support and as such this module should also be core supported. Change-Id: I8f9283c6a167152761b92984779bb39e3db51a9c	11 years ago
Joshua Colp	051da5c3af	Merge "res_rtp_asterisk: Use separate SRTP session for RTCP with DTLS"	11 years ago
George Joseph	c07e1190ec	res_pjsip_mwi: Fix segv caused by 16c7d8e74a ... I forgot the new voicemail_extension wasn't a stringfield and didn't check for NULL where I should have. Change-Id: I029482d5c2ab72474838750461bd46b0809c90fb	11 years ago
Joshua Colp	abf241b94f	Merge "res_pjsip_mwi: Allow subscribe to vm access extension as an alias"	11 years ago
Joshua Colp	96dcd81110	Merge "res_pjsip_mwi: Add voicemail extension and mwi_subscribe_replaces_unsolicited"	11 years ago
zuul	e2a8033d09	Merge "res_stasis: Add control ref to playback and recording structs."	11 years ago
zuul	cd6d478d3f	Merge "res_stasis: Fix crash on a hanging up channel."	11 years ago
Joshua Colp	7372925a5b	Merge "res_stasis.c: Protect channel datastore list from stasis end."	11 years ago
Joshua Colp	99c749cf26	Merge "res_rtp_asterisk: Fix placement of txcount increment"	11 years ago
Joshua Colp	41cedd9896	Merge "res_ari: Cannot get control also means channel is unavailable."	11 years ago
Richard Mudgett	0ea742d33a	res_stasis: Add control ref to playback and recording structs. ... The stasis_app_playback and stasis_app_recording structs need to have a struct stasis_app_control ref. Other threads can get a reference to the playback and recording structs from their respective global container. These other threads can then use the control pointer they contain after the control struct has gone. * Add control ref to stasis_app_playback and stasis_app_recording structs. With the refs added, the control command queue can now have a circular control reference which will cause the control struct to never get released if the control's command queue is not flushed when the channel leaves the Stasis application. Also the command queue needs better protection from adding commands if the control->is_done flag is set. * Flush the control command queue on exit. ASTERISK-25882 #close Change-Id: I3cf1fb59cbe6f50f20d9e35a2c07ac07d7f4320d	11 years ago
Richard Mudgett	53f63ad770	res_stasis: Fix crash on a hanging up channel. ... * Give the struct stasis_app_control ao2 object a ref to the channel held in the object. Now the channel will still be around if a thread needs to post a stasis message instead of crash because the topic was destroyed. * Moved stopping any lingering silence generator out of the struct stasis_app_control destructor and made it a part of exiting the Stasis application. Who knows which thread the destructor will be called under so it cannot affect the channel's silence generator. Not only was the channel unprotected when the silence generator was stopped, stasis may no longer even control the channel. ASTERISK-25882 Change-Id: I21728161b5fe638cef7976fa36a605043a7497e4	11 years ago
Richard Mudgett	2fab4d7da8	res_stasis.c: Protect channel datastore list from stasis end. ... Change-Id: Ifadc469590bd4d5368e19d3763db3bd1f80fdb95	11 years ago
Richard Mudgett	ece2edaa04	res_ari: Cannot get control also means channel is unavailable. ... The only caller of ari_bridges_play_found() has this note: If ari_bridges_play_found fails because the channel is unavailable for playback, The channel will be removed from the playback list soon. We can keep trying to get channels from the list until we either get one that will work or else there isn't a channel for this bridge anymore, in which case we'll revert to ari_bridges_play_new. Change-Id: Ib068141b367ccaa17be0dab4181c98e26c5127d6	11 years ago
Richard Mudgett	2f36cba4b5	res_stasis_recording.c: Cleanup stasis_app_recording_find_by_name(). ... Change-Id: Ic7d93c402c498677a122505558859c853d4e5ac7	11 years ago
George Joseph	2b3261cd36	res_pjsip_mwi: Allow subscribe to vm access extension as an alias ... Background: If your extension is 1000 and the voicemail access extension is 1571 and you dial 1571, usually a dialplan rule calls voicemailmain with your extension and you are placed directly in your mailbox. Therefore most admins program the voicemail (or other speed dial) button on their phones to the access extension. Some phones (Snom at least) use whatever is programmed there to also subscribe for MWI and so can't dial one number and subscribe to another. This works fine in chan_sip because chan_sip completely ignores the user portion of the SUBSCRIBE message request URI. If it can match the peer, is subscribes to the peer's mailbox. The user could be set to anything or nothing and you'd still get subscribed to your mailbox. Issue: chan_pjsip actually uses the user portion of the URI to find an aor and its mailboxes. Therefore a subscribe to 1571 results in a 404. Sure, you can create an aor for 1571 but you certainly can't add your entire voicemail system's mailboxes to it and everyone would get notified of every MWI. Solution: When an MWI subscribe comes in and an aor can't be found that matches the resource directly, check the resource against the endpoint's aors. If an aor is found that has a voicemail_extension that matches the resource, use it. ASTERISK-25865 Reported-by: Ross Beer Change-Id: I770ea185f751f1ada888fafb4b452115f1c06e9e	11 years ago
George Joseph	e2524fcee3	res_pjsip_mwi: Add voicemail extension and mwi_subscribe_replaces_unsolicited ... res_pjsip_mwi was missing the chan_sip "vmexten" functionality which adds the Message-Account header to the MWI NOTIFY. Also, specifying mailboxes on endpoints for unsolicited mwi and on aors for subscriptions required that the admin know in advance which the client wanted. If you specified mailboxes on the endpoint, subscriptions were rejected even if you also specified mailboxes on the aor. Voicemail extension: * Added a global default_voicemail_extension which defaults to "". * Added voicemail_extension to both endpoint and aor. * Added ast_sip_subscription_get_dialog for support. * Added ast_sip_subscription_get_sip_uri for support. When an unsolicited NOTIFY is constructed, the From header is parsed, the voicemail extension from the endpoint is substituted for the user, and the result placed in the Message-Account field in the body. When a subscribed NOTIFY is constructed, the subscription dialog local uri is parsed, the voicemail_extension from the aor (looked up from the subscription resource name) is substituted for the user, and the result placed in the Message-Account field in the body. If no voicemail extension was defined, the Message-Account field is not added to the NOTIFY body. mwi_subscribe_replaces_unsolicited: * Added mwi_subscribe_replaces_unsolicited to endpoint. The previous behavior was to reject a subscribe if a previous internal subscription for unsolicited MWI was found for the mailbox. That remains the default. However, if there are mailboxes also set on the aor and the client subscribes and mwi_subscribe_replaces_unsolicited is set, the existing internal subscription is removed and replaced with the external subscription. This allows an admin to configure mailboxes on both the endpoint and aor and allows the client to select which to use. ASTERISK-25865 #close Reported-by: Ross Beer Change-Id: Ic15a9415091760539c7134a5ba3dc4a6a1217cea	11 years ago
zuul	23d2a561d5	Merge "res_pjsip/pjsip_options: Fix From generation on outgoing OPTIONS"	11 years ago
George Joseph	724b9ab28f	res_rtp_asterisk: Fix placement of txcount increment ... Commit 1bce690ccb was incrementing txcount for rtcp packets as well as rtp packets and that was causing sender reports to be generated instead of receiver reports in cases where no rtp was actually being sent. Moved the txcount increment from __rtp_sento, which handles both rtp and rtcp, to rtp_sento which only handles rtp packets. Discovered by the hep/rtcp-receiver test. Change-Id: Ie442e4bb947a68847a676497021ba10ffaf376d5	11 years ago
George Joseph	c4064727d2	chan_pjsip: Add 'pjsip show channelstats' ... Added the ability to show channel statistics to chan_pjsip (cli_functions.c) Moved the existing 'pjsip show channel(s)' functionality from pjsip_configuration to cli_functions.c. The stats needed chan_pjsip's private header so it made sense to move the existing channel commands as well. Now using stasis_cache_dump to get the channel snapshots rather than retrieving all endpoints, then getting each one's channel snapshots. Much more efficient. Change-Id: I03b114522126d27434030b285bf6d531ddd79869	11 years ago
Joshua Colp	03845666da	Merge "res_rtp_asterisk: Fix packet stats on bridged connection"	11 years ago
zuul	2a7bc6b2aa	Merge "sorcery/res_pjsip: Refactor for realtime performance"	11 years ago
Jacek Konieczny	970803efcb	res_rtp_asterisk: Use separate SRTP session for RTCP with DTLS ... Asterisk uses separate UDP ports for RTP and RTCP traffic and RFC 5764 explicitly states: There MUST be a separate DTLS-SRTP session for each distinct pair of source and destination ports used by a media session This means RTP keying material cannot be used for DTLS RTCP, which was the reason why RTCP encryption would fail. ASTERISK-25642 Change-Id: I7e8779d8b63e371088081bb113131361b2847e3a	11 years ago
Joshua Colp	6ce25bd62a	Merge "res_parking: Misc fixes."	11 years ago
George Joseph	44ffb5105a	res_rtp_asterisk: Fix packet stats on bridged connection ... rxcount, txcount, rxoctetcount and txoctetcount weren't being calculated for bridged streams because the calulations were being done after the bridged short-circuit. Actually, rxoctetcount wasn't ever being calculated. Moved the calculations so they occur for all valid received packets and all transmitted packets. Also added rxoctetcount and txoctetcount to ast_rtp_instance_stat. Change-Id: I08fb06011a82d38c3b4068867a615068fbe59cbb	11 years ago
George Joseph	c971a64366	res_pjsip/pjsip_options: Fix From generation on outgoing OPTIONS ... No one seemed to notice but every time an OPTIONS goes out, it goes out with a From of "asterisk" (or whatever the default from_user is set to), even if you specify an endpoint. The issue had several causes... qualify_contact is only called with an endpoint if called from the CLI. If the endpoint is NULL, qualify_contact only looks up the endpoint if authenticate_qualify=yes. Even then, it never passes it on to ast_sip_create_request where the From header is set. Therefore From is always "asterisk" (or whatever the default from_user is set to). Even if ast_sip_create_request were to get an endpoint, it only sets the From if endpoint->from_user is set. The fix is 4 parts... First, create_out_of_dialog_request was modified to use the endpoint id if endpoint was specified and from_user is not set. Second, qualify_contact was modified to always look up an endpoint if one wasn't specified regardless of authenticate_qualify. It then passes the endpoint on to create_out_of_dialog_request. Third (and most importantly), find_an_endpoint was modified to find an endpoint by using an "aors LIKE %contact->aor%" predicate with ast_sorcery_retrieve_by_fields. As such, this patch will only work if the sorcery realtime optimizations patch goes in. Otherwise we'd be pulling the entire endpoints database every time we send an OPTIONS. Since we already know the contact's aor, the on_endpoint callback was also modified to just check if the contact->aor is an exact match to one of the endpoint's. Finally, since we now have an endpoint for every OPTIONS request, res_pjsip/endpt_send_request (which handles out-of-dialog reqests) was updated to get the transport from the endpoint and set it on tdata. Now the correct transport is used. Change-Id: I2207e12bb435e373bd1e03ad091d82e5aba011af	11 years ago
George Joseph	c948ce9651	sorcery/res_pjsip: Refactor for realtime performance ... There were a number of places in the res_pjsip stack that were getting all endpoints or all aors, and then filtering them locally. A good example is pjsip_options which, on startup, retrieves all endpoints, then the aors for those endpoints, then tests the aors to see if the qualify_frequency is > 0. One issue was that it never did anything with the endpoints other than retrieve the aors so we probably could have skipped a step and just retrieved all aors. But nevermind. This worked reasonably well with local config files but with a realtime backend and thousands of objects, this was a nightmare. The issue really boiled down to the fact that while realtime supports predicates that are passed to the database engine, the non-realtime sorcery backends didn't. They do now. The realtime engines have a scheme for doing simple comparisons. They take in an ast_variable (or list) for matching, and the name of each variable can contain an operator. For instance, a name of "qualify_frequency >" and a value of "0" would create a SQL predicate that looks like "where qualify_frequency > '0'". If there's no operator after the name, the engines add an '=' so a simple name of "qualify_frequency" and a value of "10" would return exact matches. The non-realtime backends decide whether to include an object in a result set by calling ast_sorcery_changeset_create on every object in the internal container. However, ast_sorcery_changeset_create only does exact string matches though so a name of "qualify_frequency >" and a value of "0" returns nothing because the literal "qualify_frequency >" doesn't match any name in the objset set. So, the real task was to create a generic string matcher that can take a left value, operator and a right value and perform the match. To that end, strings.c has a new ast_strings_match(left, operator, right) function. Left and right are the strings to operate on and the operator can be a string containing any of the following: = (or NULL or ""), !=, >, >=, <, <=, like or regex. If the operator is like or regex, the right string should be a %-pattern or a regex expression. If both left and right can be converted to float, then a numeric comparison is performed, otherwise a string comparison is performed. To use this new function on ast_variables, 2 new functions were added to config.c. One that compares 2 ast_variables, and one that compares 2 ast_variable lists. The former is useful when you want to compare 2 ast_variables that happen to be in a list but don't want to traverse the list. The latter will traverse the right list and return true if all the variables in it match the left list. Now, the backends' fields_cmp functions call ast_variable_lists_match instead of ast_sorcery_changeset_create and they can now process the same syntax as the realtime engines. The realtime backend just passes the variable list unaltered to the engine. The only gotcha is that there's no common realtime engine support for regex so that's been noted in the api docs for ast_sorcery_retrieve_by_fields. Only one more change to sorcery was done... A new config flag "allow_unqualified_fetch" was added to reg_sorcery_realtime. "no": ignore fetches if no predicate fields were supplied. "error": same as no but emit an error. (good for testing) "yes": allow (the default); "warn": allow but emit a warning. (good for testing) Now on to res_pjsip... pjsip_options was modified to retrieve aors with qualify_frequency > 0 rather than all endpoints then all aors. Not only was this a big improvement in realtime retrieval but even for config files there's an improvement because we're not going through endpoints anymore. res_pjsip_mwi was modified to retieve only endpoints with something in the mailboxes field instead of all endpoints then testing mailboxes. res_pjsip_registrar_expire was completely refactored. It was retrieving all contacts then setting up scheduler entries to check for expiration. Now, it's a single thread (like keepalive) that periodically retrieves only contacts whose expiration time is < now and deletes them. A new contact_expiration_check_interval was added to global with a default of 30 seconds. Ross Beer reports that with this patch, his Asterisk startup time dropped from around an hour to under 30 seconds. There are still objects that can't be filtered at the database like identifies, transports, and registrations. These are not going to be anywhere near as numerous as endpoints, aors, auths, contacts however. Back to allow_unqualified_fetch. If this is set to yes and you have a very large number of objects in the database, the pjsip CLI commands will attempt to retrive ALL of them if not qualified with a LIKE. Worse, if you type "pjsip show endpoint <tab>" guess what's going to happen? :) Having a cache helps but all the objects will have to be retrieved at least once to fill the cache. Setting allow_unqualified_fetch=no prevents the mass retrieve and should be used on endpoints, auths, aors, and contacts. It should NOT be used for identifies, registrations and transports since these MUST be retrieved in bulk. Example sorcery.conf: [res_pjsip] endpoint=config,pjsip.conf,criteria=type=endpoint endpoint=realtime,ps_endpoints,allow_unqualified_fetch=error ASTERISK-25826 #close Reported-by: Ross Beer Tested-by: Ross Beer Change-Id: Id2691e447db90892890036e663aaf907b2dc1c67	11 years ago
Joshua Colp	77a9272431	Merge "res_parking: Fix blind transfer dynamic lots creation."	11 years ago
zuul	36347dbc3c	Merge "res_parking: Cleanup find_channel_parking_lot_name() usage."	11 years ago
Richard Mudgett	8e8cf80cea	res_parking: Fix blind transfer dynamic lots creation. ... Blind transfers to a recognized parking extension need to use the parker's channel variable values to create the dynamic parking lot. This is because there is always only one parker while the parkee may actually be a multi-party bridge. A multi-party bridge can never supply the needed channel variables to create the dynamic parking lot. In the multi-party bridge blind transfer scenario, the parker's CHANNEL(parkinglot) value and channel variables are inherited by the local channel used to park the bridge. * In park_common_setup(), make use the parker instead of the parkee to supply the dynamic parking lot channel variable values. In all but one case, the parkee is the same as the parker. However, in the recognized parking extension blind transfer scenario for a two party bridge they are different channels. For consistency, we need to use the parker channel. * In park_local_transfer(), pass the CHANNEL(parkinglot) value to the local channel when blind transferring a multi-party bridge to a recognized parking extension. * When a local channel starts a call, the Local;2 side needs to inherit the CHANNEL(parkinglot) value from Local;1. The DTMF one-touch parking case wasn't even trying to create dynamic parking lots before it aborted the attempt. * In parking_park_call(), add missing code to create a dynamic parking lot. A DTMF bridge hook is documented as returning -1 to remove the hook. Though the hook caller is really coded to accept non-zero. See the ast_bridge_hook_callback typedef. * In feature_park_call(), don't remove the DTMF one-touch parking hook because of an error. ASTERISK-24605 #close Reported by: Philip Correia Patches: call_park.patch (license #6672) patch uploaded by Philip Correia Change-Id: I221d3a8fcc181877a1158d17004474d35d8016c9	11 years ago
Richard Mudgett	3cf714031c	res_parking: Cleanup find_channel_parking_lot_name() usage. ... Change-Id: I8f7a8890aef27824301c642d4d15407ac83e6f02	11 years ago
Richard Mudgett	13e75ee04f	res_parking: Misc fixes. ... res/parking/parking_applications.c: * Add malloc fail checks in setup_park_common_datastore(). * Fix playing parking failed announcement to only happen on non-blind transfers in park_app_exec(). It could never go out before because a test was provedly always false. res/parking/parking_bridge.c: * Fix NULL tolerance in generate_parked_user() because bridge_parking_push() can theoretically pass a NULL parker channel if the parker channel went away for some reason. * Clarify some weird code dealing with blind_transfer in bridge_parking_push(). res/parking/parking_bridge_features.c: * Made park_local_transfer() set BLINDTRANSFER on the Local;1 channel which will be bulk copied to the Local;2 channel on the subsequent ast_call(). The additional advantage is if the parker channel has the BLINDTRANSFER and ATTENDEDTRANSFER variables set they are now guaranteed to be overridden. res/parking/parking_manager.c: * Fix AMI Park action input range checking of the Timeout header in manager_park(). * Reduced locking scope to where needed in manager_park(). res/res_parking.c: * Fix some off nominal missing unlocks by eliminating the returns. Change-Id: Ib64945bc285acb05a306dc12e6f16854898915ca	11 years ago
Philip Correia	e2853ae337	res_parking: Update parking documentation for dynamic parking lots. ... * Remove duplicate res_parking.conf courtesytone config option documentation. ASTERISK-24596 #close Reported by: Philip Correia ASTERISK-24605 Reported by: Philip Correia Patches: call_park_app_doc.patch (license #6672) patch uploaded by Philip Correia Change-Id: I90a92a891c6494dc08173e675856afcc4764c5b5	11 years ago
Joshua Colp	9462a08aee	Merge "musiconhold: Only warn if music class is not found in memory and database."	11 years ago
Gianluca Merlo	894071ea2c	config: fix flags in uint option handler ... The configuration unsigned integer option handler sets flags for the parser as if the option should be a signed integer (PARSE_INT32), leading to errors on "out of range" values. Fix flags (PARSE_UINT32). A fix to res_pjsip is also present which stops invalid flags from being passed when registering sorcery object fields for qualify status. ASTERISK-25612 #close Change-Id: I96b539336275e0e72a8e8033487d2c3344debd3e	11 years ago
Walter Doekes	13cdf3e8a1	musiconhold: Only warn if music class is not found in memory and database. ... The log message when a MusicOnHold music class was not found was changed from debug level to WARNING level in Asterisk 11.19 and 13.5. For those using realtime musiconhold, this message is wrong because it warns before checking the database. This changeset delays the warning until after the database has been checked. Reported-by: Conrad de Wet ASTERISK-25444 #close Change-Id: I6cfb2db2f9cfbd2bb3d30566ecae361c4abf6dbf	11 years ago
Matthew Jordan	22e2340813	res/res_http_media_cache: Add an HTTP(S) backend for the core media cache ... This patch adds a bucket backend for the core media cache that interfaces to a remote HTTP server. When a media item is requested in the cache, the cache will query its bucket backends to see if they can provide the media item. If that media item has a scheme of HTTP or HTTPS, this backend will be invoked. The backend provides callbacks for the following: * create - this will always retrieve the URI specified by the provided bucket_file, and store it in the file specified by the object. * retrieve - this will pull the URI specified and store it in a temporary file. It is then up to the media cache to move/rename this file if desired. * delete - destroys the file associated with the bucket_file. * stale - if the bucket_file has expired, based on received HTTP headers from the remote server, or if the ETag on the server no longer matches the ETag stored on the bucket_file, the resource is determined to be stale. Note that the backend respects the ETag, Expires, and Cache-Control headers provided by the HTTP server it is querying. ASTERISK-25654 Change-Id: Ie201c2b34cafc0c90a7ee18d7c8359afaccc5250	11 years ago
Sergio Medina Toledo	bdccb81157	res_pjsip_refer.c: Fix seg fault in process of Refer-to header. ... The "Refer-to" header of an incoming REFER request is parsed by pjsip_parse_uri(). That function requires the URI parameter to be NULL terminated. Unfortunately, the previous code added the NULL terminator by overwriting memory that may not be safe. The overwritten memory results could be benign, memory corruption, or a segmentation fault. Now the URI is NULL terminated safely by copying the URI to a new chunk of memory with the correct size to be NULL terminated. ASTERISK-25814 #close Change-Id: I32565496684a5a49c3278fce06474b8c94b37342	11 years ago
zuul	d804b904c5	Merge "build: Add configure check for proto field of PJSIP TLS transport setting."	11 years ago
Joshua Colp	abe893725b	Merge "res_pjsip_refer.c: Delay sending the initial SIP Notify with frag 100"	11 years ago
Joshua Colp	4df7b3ae80	build: Add configure check for proto field of PJSIP TLS transport setting. ... Older versions of PJSIP do not have the proto field on the TLS transport setting structure. This change adds a configure check so even if it is not present we will still be able to build. Change-Id: Ibf3f47befb91ed1b8194bf63888baa6fee05aba9	11 years ago
zuul	f0799da3ac	Merge "res_pjsip_caller_id: Anonymize 'From' when caller id presentation is prohibited"	11 years ago