Generators provide such functionality as tone generation or
silence generation. RTCP frames provide RTCP information and
should not stop generators from operating.
ASTERISK-28005
Change-Id: Ieadada07b068a7aa426e8763f1b73a18e1ac34a9
The stasis cache provides a way to reconstruct the current state
of topic subscribers. Unfortunately, since every subscribe and
unsubscribe is cached, the cache continues to grow unabated while
asterisk is running. This patch removes subscribe messages from
the cache when the corresponding unsubscribe is received.
This patch also registers the cache containers with ao2 so that if
AO2_DEBUG is turned on, you can list the container and get its
stats from the CLI.
ASTERISK-27121
Change-Id: I3d18905e477f3721815da91f30da8d3fbb2d4f56
Added a check when we receive a HTTP request line or header line that is
too long. We now return an error response to the sender because we are
not able to process the request.
Change-Id: I6df2705435fd7dde4d5d3bdf7acec859cfb7c12d
Providing a buffer larger than the internal buffer of ast_iostream_gets()
fails to get lines longer than the internal buffer.
* Made ast_iostream_gets() fill the supplied buffer with read data until
either a '\n' is found or the supplied buffer is filled just like fgets().
Change-Id: If18b3f6ee500e22f0633a68779ed09f7e0f305ed
All HTTP/AMI message headers are being sent to the verbose channel.
There are multiple places this is happening. Consolidate the loop into
a function. Drop the debug/verbose message.
Convert to using ast_asprintf to perform the length calculation, memory
allocation and snprintf all in one step.
Change-Id: Ic45e673fde05bd544be95ad5cdbc69518207c1a1
When the stasis cache is used a hash is calculated for
retrieving or inserting messages. This change calculates
a hash when the message type is initialized that is then
used each time needed. This ensures that the hash is
calculated only once for the message type.
Change-Id: I4fe6bfdafb55bf5c322dd313fbd8c32cce73ef37
Changing any Menuselect option in the `Compiler Flags` section causes a
full rebuild of the Asterisk source tree. Every enabled option causes
a #define to be added to buildopts.h, thus breaking ccache caching for
every source file that includes "asterisk.h". In most cases each option
only applies to one or two files. Now we only define those options for
the specific sources which use them, this causes much better cache
matching when working with multiple builds. For example testing code
with an without MALLOC_DEBUG will now use just over half the ccache
size, only main/astmm.o will have two builds cached instead of every
file.
Reorder main/Makefile so _ASTCFLAGS set on specific object files are all
together, sorted by filename. Stop adding -DMALLOC_DEBUG to CFLAGS of
bundled pjproject, this define is no longer used by any header so only
serves to break cache.
The only code change is a slight adjustment to how main/astmm.c is
initialized. Initialization functions always exist so main/asterisk.c
can call them unconditionally. Additionally rename the astmm
initialization functions so they are not exported.
Change-Id: Ie2085237a964f6e1e6fff55ed046e2afff83c027
With the new module loader it was missed that built-in modules never
parsed dependencies from mod->info into vectors of mod. This caused
manager to be initialized before acl (named_acl). If manager.conf
used any named ACL's they would not be found and result in no ACL being
applied to the AMI user.
In addition to the manager ACL fix this adds "extconfig" to all builtin
modules which support realtime configuration. This only matters if one
of the builtin modules is configured with 'preload', depending on
"extconfig" will cause config.c to automatically be initialize during
the preload stage.
Change-Id: I482ed6bca6c1064b05bb538d7861cd7a4f02d9fc
When converting from a json object to an ast variables list the conversion
algorithm was doing a complete traversal of the entire variables list for
every item appended from the json structure.
This patch makes it so the list is no longer traversed for each new ast
variable being appended.
Change-Id: I8bf496a1fc449485150d6db36bfc0354934a3977
When publishing a device state the change can be marked as being
cachable or not. If it is not cached the change is just published
to all interested and not stored away for later query. This was not
fully taken into account when publishing in stasis. The act of
publishing would create a topic for the device even if it may be
ephemeral.
This change makes it so messages which are not cached won't create
a topic for the device. If a topic does already exist it will be
published to but otherwise the change will only be published to
the device state all topic.
ASTERISK-27591
Change-Id: I18da0e8cbb18e79602e731020c46ba4101e59f0a
The "xmldoc dump" cli command was simply concatenating xml documents
into the output file. The resulting file had multiple "xml"
processing instructions and multiple root elements which is illegal.
Normally this isn't an issue because Asterisk has only 1 main xml
documentation file but codec_opus has its own file so if it's
downloaded and you do "xmldoc dump", the result is invalid.
* Added 2 new functions to xml.c:
ast_xml_copy_node_list creates a copy of a list of children.
ast_xml_add_child_list adds a list to an existing list.
* Modified handle_dump_docs to create a new output document and
add to it the children from each input file. It then dumps the
new document to the output file.
Change-Id: I3f182d38c75776aee76413dadd2d489d54a85c07
In the past there was an assertion in the ast_sched_del function
and in order to ensure it was useful the calling function name,
line number, and filename had to be passed in. This cause the ABI
to be different between dev mode and non-dev mode.
This assertion is no longer present so the special logic can be
removed to make it the same between them both.
Change-Id: Icbc69c801e357d7004efc5cf2ab936d9b83b6ab8
Support has been added for receiving a NACK request and handling it.
Now, Asterisk can detect when a NACK request should be sent and knows
how to construct one based on the packets we've received from the remote
end. A buffer has been added that will store out of order packets until
we receive the packet we are expecting. Then, these packets are handled
like normal and frames are queued to the core like normal. Asterisk
knows which packets to request in the NACK request using a vector
which stores the sequence numbers of the packets we are currently missing.
If a missing packet is received, cycle through the buffer until we reach
another packet we have not received yet. If the buffer reaches a certain
size, send a NACK request. If the buffer reaches its max size, queue all
frames to the core and wipe the buffer and vector.
According to RFC3711, the NACK request must be sent out in a compound
packet. All compound packets must start with a sender or receiver
report, so some work was done to refactor the current sender / receiver
code to allow it to be used without having to also include sdes
information and automatically send the report.
Also added additional functionality to ast_data_buffer, along with some
testing.
For more information, refer to the wiki page:
https://wiki.asterisk.org/wiki/display/AST/WebRTC+User+Experience+Improvements
ASTERISK-27810 #close
Change-Id: Idab644b08a1593659c92cda64132ccc203fe991d
I have removed the STATIC_BUILD option immediately as it has not
been maintained in many years and is non-functional.
ASTERISK-27965
Change-Id: I64783d017b86dba9ee3c7bcfb97e59889a3f76d7
Fixes issue where error msg
"Use of before/init after destruction"
was being printed on disabled messages
in dev mode. With this
fix if message is disabled
a warning will print.
ASTERISK-25548
Change-Id: Ie0d866d1cbc60c16dbef08bc65e99505c3c1adfa
* Merge the preload and load stages, use load ordering to try preload's
first. This fixes an issue where `preload=res_config_curl` would fail
unless res_curl and func_curl were also preloaded. Now it is only
required that those modules be loaded during startup: autoload or
regular load is good enough.
* The configuration option `require` and `preload-require` were only
effective if the modules failed to load. These options will now abort
Asterisk startup if required modules fail to reach the 'Running'
state.
* Missing or invalid 'module.conf' did not prevent startup. Asterisk
doesn't do anything without modules so this a fatal error.
Change-Id: Ie4176699133f0e3a823b43f90c3348677e43a5f3
Separate "name" into "classname" and "name".
Use '.' for classname separator instead of '/'.
Prefix reserved words with '_'.
Wrap output with a top-level "testsuites" element.
Change-Id: Iec1a985eba1c478e5c1d65d5dfd95cb708442099
There is a rare case (do to the infrequent timing involved) where
CDR submission threads in batch mode can deadlock with a currently
running CDR batch process. This patch should remove the need for
holding the lock in the scheduler and should clean a few code
paths up that inconsistently submitted new work to the CDR batch
processor.
ASTERISK-27909
Change-Id: I6333e865db7c593c102c2fd948cecdb96481974d
Reported-by: Denis Lebedev
The AMI action was directly sending the text to the channel driver.
However, this makes two threads attempt to handle media and runs afowl of
CHECK_BLOCKING.
* Queue a read action to make the channel's media handling thread actually
send the text message. This changes the AMI actions success/fail response
to just mean the text was queued to be sent not that the text actually got
sent. The channel driver may not even support sending text messages.
ASTERISK-27943
Change-Id: I9dce343d8fa634ba5a416a1326d8a6340f98c379
In addition to text/* content types, incoming_in_dialog_request now
accepts application/* content types.
Also fixed a length issue when copying the body text. It was one
character short.
ASTERISK-27942
Change-Id: I4e54d8cc6158dc47eb8fdd6ba0108c6fd53f2818
* changes:
channel.c: Make CHECK_BLOCKING() save thread LWP id for messages.
channel.c: Fix usage of CHECK_BLOCKING()
autoservice: Don't start channel autoservice if the thread is a user interface.
With ./configure --enable-dev-mode[=noisy], the build fails because every
warning gets an error. Therefore, Asterisk has to be free of warnings and this
variable must go.
Change-Id: I63dd2bc4833b9bdb04602f83422d16caf289d46a
There can be one and only one thread handling a channel's media at a time.
Otherwise, we don't know which thread is going to handle the media frames.
ASTERISK-27625
Change-Id: I4d6a2fe7386ea447ee199003bf8ad681cb30454e
There can be one and only one thread handling a channel's media at a time.
Otherwise, we don't know which thread is going to handle the media frames.
ASTERISK-27625
Change-Id: Ia341f1a6f4d54f2022261abec9021fe5b2eb4905
The CHECK_BLOCKING() macro is used to indicate if a channel's handling
thread is about to do a blocking operation (poll, read, or write) of
media. A few operations such as ast_queue_frame(), soft hangup, and
masquerades use the indication to wake up the blocked thread to reevaluate
what is going on.
ASTERISK-27625
Change-Id: I4dfc33e01e60627d962efa29d0a4244cf151a84d
Executing dialplan functions from either AMI or ARI by getting a variable
could place the channel into autoservice. However, these user interface
threads do not handle the channel's media so we wind up with two threads
attempting to handle the media.
There can be one and only one thread handling a channel's media at a time.
Otherwise, we don't know which thread is going to handle the media frames.
ASTERISK-27625
Change-Id: If2dc94ce15ddabf923ed1e2a65ea0ef56e013e49
Jenkins2
Joshua Colp
George Joseph
Richard Mudgett
Jaco Kroon
Corey Farrell
Kevin Harwell
Ben Ford
Chris-Savinovich
Matthew Fredrickson
Alexander Traud