5543 Commits (20aed30d9aa512584552ecb88e7336342c874b1c)

Author	SHA1	Message	Date
Richard Mudgett	20aed30d9a	T.140: Fix format ref and memory leaks. ... * channel.c:ast_sendtext(): Fix T.140 SendText memory leak. * format_compatibility.c: T.140 RED and T.140 were swapped. * res_rtp_asterisk.c:rtp_red_init(): Fix ast_format_t140_red ref leak. * res_rtp_asterisk.c:rtp_red_init(): Fix data race after starting periodic scheduled red_write(). * res_rtp_asterisk.c: Some other minor misc tweaks. Change-Id: Ifa27a2e0f8a966b1cf628607c86fc4374b0b88cb	8 years ago
Kevin Harwell	283c16c6b6	abstract/fixed/adpative jitter buffer: disallow frame re-inserts ... It was possible for a frame to be re-inserted into a jitter buffer after it had been removed from it. A case when this happened was if a frame was read out of the jitterbuffer, passed to the translation core, and then multiple frames were returned from said translation core. Upon multiple frames being returned the first is passed on, but sebsequently "chained" frames are put back into the read queue. Thus it was possible for a frame to go back into the jitter buffer where this would cause problems. This patch adds a flag to frames that are inserted into the channel's read queue after translation. The abstract jitter buffer code then checks for this flag and ignores any frames marked as such. Change-Id: I276c44edc9dcff61e606242f71274265c7779587	8 years ago
Richard Mudgett	f4e77a5678	taskprocessor.c: Change when high water warning logged. ... The task processor queue reached X scheduled tasks message was originally intended to get logged only once per task processor to prevent spamming the log. This is no longer necessary since high and low water thresholds can better control when the message is logged. It is beneficial to generate the warning each time a task processor reaches the high water level because PJSIP stops processing new requests while any high water alert is active. Without this change you would have to enable at least debug level 3 logging to know about a repeated alert trigger. * Made generate the warning message whenever a task is pushed into the task processor that triggers the high water alert. * Appended 'again' to the warning for a repeated high water alert trigger. Change-Id: Iabf75a004f7edaf1e5e8c323099418e667cac999	9 years ago
zuul	6962a13466	Merge "core/pbx: dialplan show - display filename/line#"	9 years ago
Jonathan R. Rose	d96e350256	core/pbx: dialplan show - display filename/line# ... Adds the ability for extensions to be registered to include filename and line number so that dialplan show output can show the filename and line number of a config file responsible for generating a given extension. This only affects config modules that are written to use the new extension registering functions. In this patch, that only includes pbx_config, so extensions registered in extensions.conf and any included extension will be shown in this manner. Extensions registered in this manner will show the filename and line number *instead* of the registrar. ASTERISK-26658 #close Reported by: Jonathan R. Rose Change-Id: Ieccc6abccdff34ed5c7da3511fd24972b8f2dd30	9 years ago
Richard Mudgett	67cc8499a2	acl.c: Improve ast_ouraddrfor() diagnostic messages. ... * Made not generate strings unless they will actually be used. ASTERISK-26672 Change-Id: I155fbe7fdff5ce47dfe5326f3baf5446849702c3	9 years ago
Richard Mudgett	44e72c9d44	MESSAGE: Flush Message/ast_msg_queue channel alert pipe. ... ASTERISK-25083 Change-Id: Id54baa57a8dbca84e29f28bcd2ffc0a5ac12d8b2	9 years ago
Joshua Colp	18fe80e776	Merge "http: Send headers and body in one write."	9 years ago
Joshua Colp	119c41d001	Merge "Iostreams: Correct off-by-one error."	9 years ago
Mark Michelson	503006123a	http: Send headers and body in one write. ... This is a semi-regression caused by the iostreams change. Prior to iostreams, HTTP headers were written to a FILE handle using fprintf. Then the body was written using a call to fwrite(). Because of internal buffering, the result was that the HTTP headers and body would be sent out in a single write to the socket. With the change to iostreams, the HTTP headers are written using ast_iostream_printf(), which under the hood calls write(). The HTTP body calls ast_iostream_write(), which also calls write() under the hood. This results in two separate writes to the socket. Most HTTP client libraries out there will handle this change just fine. However, a few of our testsuite tests started failing because of the change. As a result, in order to reduce frustration for users, this change alters the HTTP code to write the headers and body in a single write operation. ASTERISK-26629 #close Reported by Joshua Colp Change-Id: Idc2d2fb3d9b3db14b8631a1e302244fa18b0e518	9 years ago
Mark Michelson	bf6423a336	Iostreams: Correct off-by-one error. ... ast_iostream_printf() attempts first to use a fixed-size buffer to perform its printf-like operation. If the fixed-size buffer is too small, then a heap allocation is used instead. The heap allocation in this case was exactly the length of the string to print. The issue here is that the ensuing call to vsnprintf() will print a NULL byte in the final space of the string. This meant that the final character was being chopped off the string and replaced with a NULL byte. For HTTP in particular, this caused problems because HTTP publishes the expected Contact-Length. This meant HTTP was publishing a length one character larger than what was actually present in the message. This patch corrects the issue by adding one to the allocation length. ASTERISK-26629 Reported by Joshua Colp Change-Id: Ib3c5f41e96833d0415cf000656ac368168add639	9 years ago
George Joseph	fe9f070885	pjproject_bundled: Fix missing inclusion of symbols ... Added back in a -g3, and an -O3 when DONT_OPTIMIZE is not set, to the CFLAGS. Not sure how they went missing. Also fixed an uninstall problem where we weren't removing the symlink from libasteriskpj.so.2 to libasteriskpj.so. While I was there, I fixed it for libasteriskssl as well. Change-Id: I9e00873b1e9082d05b5549d974534b48a2142556	9 years ago
Joshua Colp	faf2194fab	Merge "app_originate: Add option to execute gosub prior to dial"	9 years ago
Joshua Colp	cd5d9d1d69	Merge "tcptls: Use new certificate upon sip reload"	9 years ago
Joshua Colp	197e408395	Merge "PJPROJECT logging: Made easier to get available logging levels."	9 years ago
Joshua Colp	2679f80d3c	Merge "res_rtp: Fix regression when IPv6 is not available."	9 years ago
Joshua Colp	02588a1aab	Merge "Frame deferral: Re-queue deferred frames one-at-a-time."	9 years ago
zuul	68fc035795	Merge "OpenSSL 1.1.0 support"	9 years ago
Tzafrir Cohen	26c8552fff	OpenSSL 1.1.0 support ... OpenSSL 1.1.0 includes some major changes in the interface. See https://wiki.openssl.org/index.php/1.1_API_Changes . Status: Right now there are still a few deprecation notes with OpenSSL 1.1.0. But it's a start. Changes: * CRYPTO_LOCK is no longer available. Replace it with its value for now. I don't completely understand what it is used for there. * Remove several functions from libasteriskssl that seem to no longer be needed. * Structures have become opaque and are accesses with accessors. * ERR_remove_thread_state() no longer needed. * SSLv2 code now could no longer be used in 1.1. ASTERISK-26109 #close Change-Id: I5e29d477d486ca29b6aae0dc2f5dff960c1cb82b	9 years ago
Guido Falsi	75230f4c01	res_rtp: Fix regression when IPv6 is not available. ... The latest Release candidate fails to create RTP streams when IPv6 is not available. Due to the changes made in September the ast_sockaddr structure passed around to create these streams is always of AF_INET6 type, causing failure when used for IPv4. This patch adds a utility function to check for availability of IPv6 and applies such check at startup to determine how to create the ast_sockaddr structures. ASTERISK-26617 #close Change-Id: I627a4e91795e821111e1cda523f083a40d0e0c3e	9 years ago
Richard Mudgett	1dfa11b65c	PJPROJECT logging: Made easier to get available logging levels. ... Use of the new logging is as simple as issuing the new CLI command or setting the new pjproject.conf option. Other options that can affect the logging are how you have the pjproject log levels mapped to Asterisk log types in pjproject.conf and if you have configured Asterisk to log the DEBUG type messages. Altering the pjproject.conf level mapping shouldn't be necessary for most installations as the default mapping is sensible. Configuring Asterisk to log the DEBUG message type is standard practice for collecting debug information. * Added CLI "pjproject set log level" command to dynamically adjust the maximum pjproject log message level. * Added CLI "pjproject show log level" command to see the currently set maximum pjproject log message level. * Added pjproject.conf startup section "log_level" option to set the initial maximum pjproject log message level so all messages could be captured from initialization. * Set PJ_LOG_MAX_LEVEL to 6 to compile in all defined logging levels into bundled pjproject. Pjproject will use the currently set run time log level to determine if a log message is generated just like Asterisk verbose and debug logging levels. * In log_forwarder(), made always log enabled and mapped pjproject log messages. DEBUG mapped log messages are no longer gated by the current Asterisk debug logging level. * Removed RAII_VAR() from res_pjproject.c:get_log_level(). ASTERISK-26630 #close Change-Id: I6dca12979f482ffb0450aaf58db0fe0f6d2e5389	9 years ago
Mark Michelson	621d886ca7	Frame deferral: Re-queue deferred frames one-at-a-time. ... The recent change that made frame deferral into an API had a behavior change to it. When frame deferral was completed, we would take all of the deferred frames and queue them all onto the channel in one call to ast_queue_frame_head(). Before frame deferral was API-ized, places that performed manual frame deferral would actually take each deferred frame and queue them onto the channel. This change in behavior caused the confbridge_recording test to start failing consistently. Without going too crazily deep into the details, a channel was getting "stuck" in an ast_safe_sleep(). An AMI redirect was attempting to break it out of the sleep, but because there were more frames in the channel read queue than expected, the channel ended up being unable to break from its sleep loop. By restoring the behavior of individual frame queuing after deferral, the test starts passing again. Note, this points to a potential underlying issue pointing to an "unbalance" that can occur when queuing multiple frames at once, and so a follow-up issue is being created to investigate that possibility. Change-Id: Ied5dacacda06d343dea751ed5814a03364fe5a7d	9 years ago
zuul	a0c0b1c9cb	Merge "chan_pjsip: fix switching sending codec when asymmetric_rtp_codec=no"	9 years ago
Joshua Colp	bd20127e64	Merge "chan_sip: Fix segfault during module unload"	9 years ago
Alexei Gradinari	e5e887be53	chan_pjsip: fix switching sending codec when asymmetric_rtp_codec=no ... The sending codec is switched to the receiving codec and then is switched back to the best native codec on EVERY receiving RTP packets. This is because after call of ast_channel_set_rawwriteformat there is call of ast_set_write_format which calls set_format which sets rawwriteformat to the best native format. This patch adds a new function ast_set_write_format_path which set specific write path on channel and uses this function to switch the sending codec. ASTERISK-26603 #close Change-Id: I5b7d098f8b254ce8f45546e6c36e5d324737f71d	9 years ago
David Kerr	ddc951060a	app_originate: Add option to execute gosub prior to dial ... Issue/patch ASTERISK-26587 was inspired by issue ASTERISK-22992 that requested ability to add callerid into app_originate. Comments in that issue suggested that it was better solved by adding an option to gosub prior to originating the call. The attached patch implements this much like app_dial with two options one to gosub on the originating channel and one to gosub on the newly created channel and behaves just like app_dial. I have tested this patch by adding callerid info to the new channel and also SIPAddHeader (to e.g. add header to force auto answer) and confirmed it works. Have also tested both 'exten' and 'app' versions of app_originate. Opened by: dkerr Patch by: dkerr Change-Id: I36abc39b58567ffcab4a636ea196ef48be234c57	9 years ago
Joshua Colp	c9cc64b911	Merge "ast_format: Adds an identifier for interleaved audio formats to the ast_format"	9 years ago
Joshua Colp	e3dae763ee	iostream: Move include of asterisk.h ... The asterisk.h header file needs to be included first or else some things go awry, such as: implicit declaration of function 'vasprintf' Change-Id: I981dc2a77a1ba791888e4f1726644d4656c0407c	9 years ago
Michael Kuron	0b588778c0	chan_sip: Fix segfault during module unload ... If a TCP/TLS connection was pending (not accepted and not timed out) during unload of chan_sip, Asterisk would segfault when trying to send a signal to a thread whose thread ID hadn't been recorded yet. This commit fixes that by recording the thread ID before calling the blocking connect() syscall. This was a regression introduced by 776a14386a. The above wasn't enough to fix the segfault, which was now delayed to the point where connect() timed out. Therefore, it was necessary to also remove the SA_RESTART flag from the SIGURG sigaction so that pthread_kill() could be used to interruput the connect() syscall. This was a regression introduced by 5d313f51b9. ASTERISK-26586 #close Change-Id: I76fd9d47d56e4264e2629bce8ec15fecba673e7b	9 years ago
gestoip2	d9b24cce0a	res_rtp_asterisk: RTT miscalculation in RTCP ... When retrieving RTCP stats for PJSIP channels, RTT values are unreliable. RTT calculation is correct, but the data representation isn't. RTT is represented by a 32-bit fixed-point number with the integer part in the first 16 bits and the fractional part in the last 16 bits. In order to get the RTT value, the fractional part is miscalculated, there is an unnecessary 16 bit shift that causes overflow. Besides this there is another mistake, when transforming the integer value to the fixed point fractional part via bitwise operation, that loses precision. * RTT fractional part is no longer shifted, avoiding overflow. * RTT fractional part is transformed to its fixed-point value more precisely. * Fixed timeval2ntp() and ntp2timeval() second fraction conversions. * Fixed NTP timestamp report logging. The usec was inexplicably multiplied by 4096. ASTERISK-26566 #close Reported by Hector Royo Concepcion Change-Id: Ie09bdabfee75afb3f1b8ddfd963e5219ada3b96f	9 years ago
Michael Kuron	635b0a0a55	tcptls: Use new certificate upon sip reload ... Previously, a TLS server socket would only be restarted upon sip reload if the bind address had changed. This commit adds checking for changes to TLS parameters like certificate, ciphers, etc. so they get picked up without requiring a reload of the entire chan_sip module. This does not affect open connections in any way, but new connections will use the new TLS parameters. The changes also apply to HTTP and Manager. ASTERISK-26604 #close Change-Id: I169e86cefc6dcd627c915134015a6a1ab1aadbe6	9 years ago
Joshua Colp	b1f7cc4223	Merge "Add support for older name resolving version libraries like openBSD"	9 years ago
George Joseph	abae3dc36e	pjproject_bundled: Use $(LIB_RT) for link of libasteriskpj ... libasteriskpj was hard coded to use -lrt but librt is linux specific so we now use the LIB_RT variable which gets set by configure. Change-Id: I41148884517e3031f7675a413d524c86e8614694	9 years ago
Joshua Colp	84e508c999	Merge "main/app.c: Transmit Silence on ControlPlayback pause"	9 years ago
snuffy	b546497fe0	Add support for older name resolving version libraries like openBSD ... Fix support of OS's like openBSD that use an older nameser.h, this change reverts the defines to the older style which on other systems is found in nameser_compat.h Tested on openBSD 6.0, Debian 8 ASTERISK-26608 #close Change-Id: Iffb36caab8c5aa9dece0ce2d009041f7b56cc86a	9 years ago
zuul	782985631e	Merge "build: Various OpenBSD issues"	9 years ago
misha	e822a50f86	main/app.c: Transmit Silence on ControlPlayback pause ... ASTERISK-26562 #close Change-Id: Ie6cb0ffc2b8c775639ce7784fe96f4ea00cfa2f8	9 years ago
Joshua Colp	d3dba74017	Merge "Implement internal abstraction for iostreams"	9 years ago
Joshua Colp	09d1958448	Merge "codec_opus: Fix warning when Opus negotiated but codec_opus not loaded."	9 years ago
George Joseph	935f5d003b	build: Various OpenBSD issues ... OpenBSD's 'find' doesn't take the -delete argument so you have to pipe through 'xargs rm -rf'. 'echo -e' doesn't like \t starting a line. It just prints 't' which causes the libasteriskpj.exports file to be garbage. They were just cosmetic so they were removed. librt doesn't exist so the link of libasteriskpj.so fails. It's not actually needed for linux anyway so -lrt was removed from the link. res_rtp_asterisk was failing to load because of an undefined DTLS_method. '|| defined(LIBRESSL_VERSION_NUMBER)' was added to the #if so DTLSv1_method is used instead. ASTERISK-26608 Change-Id: I926ec95b0b69633231e3ad1d6e803b977272c49c	9 years ago
George Joseph	97b2ba472d	Merge "channel: Fix issues in hangup scenarios caused by frame deferral"	9 years ago
George Joseph	b8e91bb9cc	Merge "Revert "Revert "channel: Use frame deferral API for safe sleep."""	9 years ago
George Joseph	99e97154bb	Merge "Revert "Revert "autoservice: Use frame deferral API"""	9 years ago
George Joseph	013e7dd4a6	Merge "Revert "Revert "AGI: Only defer frames when in an interception routine."""	9 years ago
George Joseph	ac0a1ee6da	Merge "Revert "Revert "Add API for channel frame deferral."""	9 years ago
zuul	d0474f6322	Merge "res/ari/resource_bridges: Add the ability to manipulate the video source"	9 years ago
George Joseph	89e79a487a	Merge "file.c/__ast_file_read_dirs: Fix issues on filesystems without d_type"	9 years ago
Richard Mudgett	ed9ced0531	codec_opus: Fix warning when Opus negotiated but codec_opus not loaded. ... When Opus is negotiated but not loaded, the log is spammed with messages because the system does not know how to calculate the number of samples in a frame. * Suppress the warning by supplying a function that assumes 20ms of samples in the frame. For pass through support it doesn't really seem to matter what number of samples is returned anyway. ASTERISK-26605 #close Change-Id: Icf2273692f040dc2c45b01e72a790d11092f9e0f	9 years ago
Joshua Colp	1c26117dff	Merge "cli: Fix ast_el_read_char to work with libedit >= 3.1"	9 years ago
George Joseph	3017f09f22	file.c/__ast_file_read_dirs: Fix issues on filesystems without d_type ... One of the code paths in __ast_file_read_dirs will only get executed if the OS doesn't support dirent->d_type OR if the filesystem the particular file is on doesn't support it. So, while standard Linux systems support the field, some filesystems like XFS do not. In this case, we need to call stat() to determine whether the directory entry is a file or directory so we append the filename to the supplied directory path and call stat. We forgot to truncate path back to just the directory afterwards though so we were passing a complete file name to the callback in the dir_name parameter instead of just the directory name. The logic has been re-written to only create a full_path if we need to call stat() or if we need to descend into another directory. Change-Id: I54e4228bd8355fad65200c6df3ec4c9c8a98dfba	9 years ago