706 Commits (1d3739fcbdde1b3c04ea797f3ba94e617c26a3ce)

Author	SHA1	Message	Date
George Joseph	aa84bc31e2	Merge "app_chanisavail.c: Simplify dialplan using ChanIsAvail." into 13	7 years ago
Friendly Automation	b929ac2c64	Merge "app_dial.c: Simplify dialplan using Dial." into 13	7 years ago
Richard Mudgett	3a8290d1f2	app_chanisavail.c: Simplify dialplan using ChanIsAvail. ... Dialplan has to be careful about passing an empty device list or empty positions in the list. As a result, dialplan has to check for these conditions before using ChanIsAvail. Simplify dialplan by making ChanIsAvail handle these conditions gracefully. * Made tolerate empty positions in the device list. * Simplified the code and eliminated some unnecessary indention. ASTERISK-28638 Change-Id: I9e4b67e2cbf26b2417c2d03485b8568e898931d3	7 years ago
Richard Mudgett	f6f25601a4	app_dial.c: Simplify dialplan using Dial. ... Dialplan has to be careful about passing an empty destination list or empty positions in the list. As a result, dialplan has to check for these conditions before using Dial. Simplify dialplan by making Dial handle these conditions gracefully. * Made tolerate empty positions in the dialed device list. * Reduced some message log levels from notice to verbose. ASTERISK-28638 Change-Id: I6edc731aff451f8bdfaee5498078dd18c3a11ab9	7 years ago
Richard Mudgett	4414def9f9	app_page.c: Simplify dialplan using Page. ... Dialplan has to be careful about passing an empty destination list or empty positions in the list. As a result, dialplan has to check for these conditions before using Page. Simplify dialplan by making Page handle these conditions gracefully. * Made tolerate empty positions in the paged device list. * Reduced some warnings associated with the 's' option to verbose messages. The warning level for those messages really serves no purpose as that is why the 's' option exists. ASTERISK-28638 Change-Id: I95b64a6d6800cd1a25279c88889314ae60fc21e3	7 years ago
Joshua Colp	5a3826e334	Merge "res_fax: wrap v21 detected Asterisk initiated negotiation with config option" into 13	7 years ago
Friendly Automation	66970af0d3	Merge "confbridge: Add support for specifying maximum sample rate." into 13	7 years ago
Joshua C. Colp	ca35de4282	confbridge: Add support for specifying maximum sample rate. ... ConfBridge has the ability to move between different sample rates for mixing the conference bridge. Up until now there has only been the ability to set the conference bridge to mix at a specific sample rate, or to let it move between sample rates as necessary. This change adds the ability to configure a conference bridge with a maximum sample rate so it can move between sample rates but only up to the configured maximum. ASTERISK-28658 Change-Id: Idff80896ccfb8a58a816e4ce9ac4ebde785963ee	7 years ago
Friendly Automation	7004fb6175	Merge "PJSIP_CONTACT: add missing argument documentation" into 13	7 years ago
Kevin Harwell	754fca9297	res_fax: wrap v21 detected Asterisk initiated negotiation with config option ... A previous patch: Gerrit Change-Id: I73bb24799bfe1a48adae9c034a2edbae54cc2a39 made it so a T.38 Gateway tries to negotiate with both sides by sending T.38 negotiation request to both endpoints supported T.38 versus the previous behavior of forwarding negotiation to the "other" channel once a preamble was detected. This had the unfortunate side effect of breaking some setups. Specifically ones that set the max datagram option on an endpoint configuration (configured max datagram was not propagated since Asterisk now initiates negotiations). This patch adds a configuration option, "negotiate_both", that when enabled makes it so Asterisk initiates the negotiation requests to both endpoints vs. the previous behavior of waiting, and forwarding the request. The default is disabled keeping with the old behavior. ASTERISK-28660 Change-Id: I5deb875f3485e20bc75119ec743090655d864a1a	7 years ago
Asterisk Development Team	51482dec75	Update CHANGES and UPGRADE.txt for 13.30.0	7 years ago
Pascal Cadotte Michaud	644ae311bb	PJSIP_CONTACT: add missing argument documentation ... add missing argument "rtt" and "status" to the documentation The change to the dtd file allow an enumlist to contain one or many configOptionToEnum or enum. This is different from the previous patch I submitted when you could have a configOptionToEnum or (a configOptionToEnum followed by one or manu enums) or (one or many enums) ASTERISK-28626 Change-Id: Ia71743ee7ec813f40297b0ddefeee7909db63b6d	7 years ago
George Joseph	d4df66dc8a	Merge "Revert "PJSIP_CONTACT: add missing argument documentation"" into 13	7 years ago
Joshua Colp	c1cfca5ef1	Revert "PJSIP_CONTACT: add missing argument documentation" ... This reverts commit 3778e1abcd. Reason for revert: Regression in XML validation. validity error : Content model of enumlist is not determinist: (configOptionToEnum | (configOptionToEnum , enum+) | enum+) As we are preparing to do releases and this is not critical I am reverting this for now until resolved. Change-Id: I07b539d0406e8af08934a91223e850444bde1b75	7 years ago
Friendly Automation	5386b674e1	Merge "PJSIP_CONTACT: add missing argument documentation" into 13	7 years ago
George Joseph	1b9281a5de	manager.c: Prevent the Originate action from running the Originate app ... If an AMI user without the "system" authorization calls the Originate AMI command with the Originate application, the second Originate could run the "System" command. Action: Originate Channel: Local/1111 Application: Originate Data: Local/2222,app,System,touch /tmp/owned If the "system" authorization isn't set, we now block the Originate app as well as the System, Exec, etc. apps. ASTERISK-28580 Reported by: Eliel Sardañons Change-Id: Ic4c9dedc34c426f03c8c14fce334a71386d8a5fa	7 years ago
Pascal Cadotte Michaud	3778e1abcd	PJSIP_CONTACT: add missing argument documentation ... add missing argument "rtt" and "status" to the documentation ASTERISK-28626 Change-Id: I8419e4c8203e411b87d93dc395acdbcf7526dedf	7 years ago
Martin Tomec	f032b8c158	func_curl.c: Support custom http headers ... When user wants to send json data, the default Content-Type header is incorect (application/x-www-form-urlencoded). This patch allows to set any custom headers so the Content-Type header can be overriden. User can set multiple headers by multiple calls of curlopt(). This approach is not consistent with other parameters, but is more readable in dialplan than one call with multiple headers. ASTERISK-28613 Change-Id: I4dd68c3f4e25362ef941d73a3861f58348dcfbf9	7 years ago
Sean Bright	0834e06673	Revert "app_voicemail: Cleanup stale lock files on module load" ... This reverts commit fd2e8d0da7. Reason for revert: Problematic for users who store their voicemail on network storage devices, or share voicemail storage between multiple Asterisk instances. ASTERISK-28567 #close Change-Id: I3ff4ca983d8e753fe2971f3439bd154705693c41	7 years ago
Friendly Automation	a3ef4d22d4	Merge "channel/chan_pjsip: add dialplan function for music on hold" into 13	7 years ago
Torrey Searle	6fd195ca91	channel/chan_pjsip: add dialplan function for music on hold ... Add a new dialplan function PJSIP_MOH_PASSTHROUGH that allows the on-hold behavior to be controlled on a per-call basis ASTERISK-28542 #close Change-Id: Iebe905b2ad6dbaa87ab330267147180b05a3c3a8	7 years ago
George Joseph	c6f81a7ba4	Merge "taskprocessor.c: Added "like" support to 'core show taskprocessors'" into 13	7 years ago
Ben Ford	67bd02d08d	taskprocessor.c: Added "like" support to 'core show taskprocessors' ... Added "like" support for 'core show taskprocessors'. Now you can specify a specific set of taskprocessors (or just one) by adding the keyword "like" to the above command, followed by your search criteria. Change-Id: I021e740201e9ba487204b5451e46feb0e3222464	7 years ago
Ben Ford	3069153bdf	taskprocessor.c: Add CLI commands to reset taskprocessor stats. ... Added two new CLI commands to reset stats for taskprocessors. You can reset stats for a single, specific taskprocessor ('core reset taskprocessor <taskprocessor>'), or you can reset all taskprocessors ('core reset taskprocessors'). These commands will reset the counter for the number of tasks processed as well as the max queue size. Change-Id: Iaf17fc4ae29396ab0c6ac92408fc7bdc2f12362d	7 years ago
Asterisk Development Team	18fbd8d8c3	Update CHANGES and UPGRADE.txt for 13.29.0	7 years ago
sungtae kim	2705652152	res_musiconhold: Added unregister realtime moh class ... This fix allows a realtime moh class to be unregistered from the command line. This is useful when the contents of a directory referenced by a realtime moh class have changed. The realtime moh class is then reloaded on the next request and uses the new directory contents. ASTERISK-17808 Change-Id: Ibc4c6834592257c4bb90601ee299682d15befbce	7 years ago
Sean Bright	ddc64ca059	audiohook.c: Substitute silence for unavailable audio frames ... There are 4 scenarios to consider when capturing audio from a channel with an audiohook: 1. There is no rx and no tx audio, so return nothing. 2. There is rx but no tx audio, so return rx. 3. There is tx but no rx audio, so return tx. 4. There is rx and tx audio, so mix them and return. The file passed as the primary argument to MixMonitor will be written to in scenarios 2, 3, and 4. However, if you pass the r() and t() options to MixMonitor, a frame will only be written to the r() file if there was rx audio and a frame will only be written to the t() file if there was tx audio. If you subsequently take the r() and t() files and try to mix them, the sides of the conversation will 'drift' and be non-representative of the user experience. This patch adds a new 'S' option to MixMonitor that injects a frame of silence on either the r() side or the t() side of the channel so that when later mixed, there is no such drift. Change-Id: Ibf5ed73a811087727bd561a89a59f4447b4ee20e	7 years ago
George Joseph	284b657539	Merge "Build: Add separate header install/uninstall targets" into 13	7 years ago
Asterisk Development Team	b3d0754f82	Update CHANGES and UPGRADE.txt for 13.28.0	7 years ago
George Joseph	aaafe8a108	Build: Add separate header install/uninstall targets ... Two new Makefile targets have been added... "install-headers" and "uninstall-headers" to separately control header installation. The existing behavior has not changed so "make install" and "make uninstall" will continue to also install/uninstall the headers. The new targets were added for forward compatibility with Asterisk 17 in which the headers are no longer installed/uninstalled with the "install" and "uninstall" targets. Also corrects an issue where /usr/include/asterisk.h was never being removed at all. Change-Id: Ia7399f3a0203a4825fc4a9f43b9034dae9a2b643	7 years ago
Joshua Colp	d5fed38ab5	Merge "res_rtp_asterisk: Add support for DTLS packet fragmentation." into 13	7 years ago
Joshua Colp	1ea9bad34d	res_rtp_asterisk: Add support for DTLS packet fragmentation. ... This change adds support for larger TLS certificates by allowing OpenSSL to fragment the DTLS packets according to the configured MTU. By default this is set to 1200. This is accomplished by implementing our own BIO method that supports MTU querying. The configured MTU is returned to OpenSSL which fragments the packet accordingly. When a packet is to be sent it is done directly out the RTP instance. ASTERISK-28018 Change-Id: If2d5032019a28ffd48f43e9e93ed71dbdbf39c06	7 years ago
George Joseph	83c353c650	Merge "app_attended_transfer: new application AttendedTransfer" into 13	7 years ago
Alexei Gradinari	45a9ee4c53	app_attended_transfer: new application AttendedTransfer ... AttendedTransfer queues up attended transfer to the given extension. This application can be useful with Custom Dynamic Features. For example to make attended transfer to a predefined number. features.conf ;;; [applicationmap] my_atxfer => *7,self,GoSub,"my_atxfer,s,1",default ;;; extensions.conf ;;; [globals] DYNAMIC_FEATURES=my_atxfer TRANSFER_CONTEXT=my_transfer [my_atxfer] exten => s,1,AttendedTransfer(1234567890) same => n,Return() [my_transfer] include => default ;;; This application also can be used to completly redefine Attended transfer feature using dialplan. For example: features.conf ;;; [featuremap] atxfer => *7 [applicationmap] custom_atxfer => *2,self,GoSub,"custom_atxfer,s,1",default ;;; extensions.conf ;;; [globals] DYNAMIC_FEATURES=custom_atxfer TRANSFER_CONTEXT=my_transfer [custom_atxfer] exten => s,1, same => n,Playback(pbx-transfer) same => n,Read(dest,dial,10,i,3,3) same => n,AttendedTransfer(${dest}) same => n,Return() [my_transfer] include => default ;;; Change-Id: Ie5cfa455d0813cffd5c85a6fb117f07d8f0b903b	7 years ago
Alexei Gradinari	dd12e1cbd3	app_blind_transfer: new application BlindTransfer ... BlindTransfer redirects all channels currently bridged to the caller channel to the specified destination. This application can be useful with Custom Dynamic Features. For example to make blind transfer to a predefined number. features.conf ;;; [applicationmap] my_blindxfer => *6,self,GoSub,"my_blindxfer,s,1",default ;;; extensions.conf ;;; [globals] DYNAMIC_FEATURES=my_blindxfer [my_blindxfer] exten => s,1,BlindTransfer(1234567890,default) same => n,Return() ;;; This application also can be used to completly redefine Blind transfer feature using dialplan. For example: features.conf ;;; [featuremap] blindxfer => [applicationmap] custom_blindxfer => ##,self,GoSub,"custom_blindxfer,s,1",default ;;; extensions.conf ;;; [globals] DYNAMIC_FEATURES=custom_blindxfer [custom_blindxfer] exten => s,1, same => n,Playback(pbx-transfer) same => n,Read(dest,dial,10,i,3,3) same => n,BlindTransfer(${dest},default) same => n,Return() ;;; Change-Id: I9d55e7f69ccfd4472dec00d62771d6de8803215a	7 years ago
Friendly Automation	6df25921ca	Merge "app_readexten: new option 'p' to stop reading on '#' key" into 13	7 years ago
Asterisk Development Team	fba341af8b	Update CHANGES and UPGRADE.txt for 13.27.0	7 years ago
Ben Ford	6aeab9d5e7	build: Fix file format in CHANGES-staging. ... One of the change files doesn't conform to the format that the release scripts need in order to parse it. Change-Id: Ie0b634cf27e4cbc671b9fe92993b6f2ecf60254c	7 years ago
Alexei Gradinari	6ded762dbf	app_readexten: new option 'p' to stop reading on '#' key ... This patch adds the 'p' option. The extension entered will be considered complete when a # is entered. Change-Id: If77c40c9c8b525885730821e768f5dea71cf04c1	7 years ago
George Joseph	90fe830a77	res_rtp_asterisk: Add ability to propose local address in ICE ... You can now add the "include_local_address" flag to an entry in rtp.conf "[ice_host_candidates]" to include both the advertized address and the local address in ICE negotiation: [ice_host_candidates] 192.168.1.1 = 1.2.3.4,include_local_address This causes both 192.168.1.1 and 1.2.3.4 to be advertized. Change-Id: Ide492cd45ce84546175ca7d557de80d9770513db	7 years ago
Friendly Automation	10b46eea9e	Merge "app_dial.c: RINGTIME, PROGRESSTIME and ms resolution dial timings" into 13	8 years ago
Antoni Goldstein	001e7762e4	app_dial.c: RINGTIME, PROGRESSTIME and ms resolution dial timings ... Added RINGTIME, RINGTIME_MS, PROGRESSTIME, PROGRESSTIME_MS variables filled at the earliest received PROGRESS or RINGING. Added millisecond versions of DIALEDTIME and ANSWEREDTIME. Added millisecond versions of ast_channel_get_up_time and ast_channel_get_duration in channel.c. ASTERISK-28363 Change-Id: If95f1a7d8c4acbac740037de0c6e3109ff6620b1	8 years ago
Dan Cropp	00588226c6	res_pjsip: Added a norefersub configuration setting ... Added a new PJSIP global setting called norefersub. Default is true to keep support working as before. res_pjsip_refer: Configures PJSIP norefersub capability accordingly. Checks the PJSIP global setting value. If it is true (default) it adds the norefersub capability to PJSIP. If it is false (disabled) it does not add the norefersub capability to PJSIP. This is useful for Cisco switches that do not follow RFC4488. ASTERISK-28375 #close Reported-by: Dan Cropp Change-Id: I0b1c28ebc905d881f4a16e752715487a688b30e9	8 years ago
Ben Ford	251348cbbb	build: Revise CHANGES and UPGRADE.txt handling. ... This changes the way that we handle adding changes to CHANGES and UPGRADE.txt. The reason for this is because whenever someone needed to make a change to one of these files and someone else had already done so, you would run into merge conflicts. With this new setup, there will never be merge conflicts since all changes will be documented in the doc/<file>-staging directory. The release script is now responsible for merging all of these changes into the appropriate files. There is a special format that these files have to follow in order to be parsed. The files do not need to have a meaningful name, but it is strongly recommended. For example, if you made a change to pjsip, you may have something like this "res_pjsip_relative_title", where "relative_title" is something more descriptive than that. Inside each file, you will need a subject line for your change, followed by a description. There can be multiple subject lines. The file may look something like this: Subject: res_pjsip Subject: Core A description that explains the changes made and why. The release script will handle the bulleting and section separators! You can still separate with new lines within your description. The headers ("Subject" and "Master-Only") are case sensative, but the value for "Master-Only" ("true" or "True") is not. For more information, check out the wiki page: https://wiki.asterisk.org/wiki/display/AST/CHANGES+and+UPGRADE.txt ASTERISK-28111 #close Change-Id: I19cf4b569321c88155a65e9b0b80f6d58075dd47	8 years ago
Ben Ford	90c1653997	build: Add staging directories for future changes. ... This is the first step in changing the release process so that changes made to the CHANGES and UPGRADE.txt files do not result in merge conflicts every time multiple people modify these files. The changes made will go in these new directories: doc/CHANGES-staging and doc/UPGRADE-staging. The README.md files explain how things will work, but here's a little overview. When you make a change that would go in either CHANGES or UPGRADE.txt, this should instead be documented in a new file in the doc/CHANGES-staging or doc/UPGRADE-staging directory, respectively. The format will look like this: Subject: res_pjsip A description that explains the changes made and why. The release script will handle the bulleting and section separators! The 'Subject:' header is case-sensitive. You can still separate with new lines within your description. Subject: res_ari Master-Only: true You can have more than one subject, and they don't have to be the same! Also, the 'Master-Only' header should always be true and is also case-sensitive (but the value is not - you can have 'true' or 'True'). This header will only ever be present in the master branch. For more information, check out the wiki page: https://wiki.asterisk.org/wiki/display/AST/CHANGES+and+UPGRADE.txt This is an initial change for ASTERISK_28111. Functionally, this will make no difference, but it will prep the directories for when the changes from CHANGES and UPGRADE.txt are extracted. Change-Id: I8d852f284f66ac456b26dcb899ee46babf7d15b6	8 years ago
Corey Farrell	7593359787	Build System: Enable python3 compatibility. ... * Consistently use spaces in rest-api-templates/asterisk_processor.py. * Exclude third-party from docs/full-en_US.xml. * Add docs/full-en_US.xml to .gitignore. * Use list() to convert python3 view. * Use python3 print function. * Replace cmp() with equivalent equation. * Replace reference to out of scope subtype variable with name parameter. * Use unescaping triple bracket notation in mustache templates where needed. This causes behavior of Python2 to be maintained when using Python3. * Fix references to has_websocket / is_websocket in res_ari_resource.c.mustache. * Update calculation of has_websocket to use any(). * Use unicode mode for writing output file in transform.py. * Replace 'from swagger_model import *' with explicit import of required symbols. * Add missing 'import os' * Fix invalid reference to swagger_version from exception handler. I have not tested voicemailpwcheck.py, only the print syntax has been fixed. Change-Id: If5c5b556a2800d41a3e2cfef080ac2e151178c33	9 years ago
Corey Farrell	cacb72f5ae	doc/lang/language-criteria.txt: Link to wiki. ... This document is out of date and is superseded by content on the Asterisk wiki. ASTERISK-24386 #close Change-Id: Idbf95b27b096c205251e1bbb560c79224ba81822	9 years ago
Sean Bright	09edcd93aa	appdocsxml.xslt: Add Language to channel snapshot transformation ... Change-Id: I8f494b0c895a69b8bc94656d0c6ceebecb0394d8	9 years ago
Sean Bright	ce3d56920b	Remove as much trailing whitespace as possible. ... Change-Id: I873c1c6d00f447269bd841494459efccdd2c19c0	9 years ago
Sean Bright	6892c13a2c	docs: Remove old API changes documentation ... Change-Id: I1bc7957121cc7ae27dca04acc3613f4e1858476a	9 years ago