asterisk

Commit Graph

Author	SHA1	Message	Date
George Joseph	d014cedf5d	bundled_pjproject: Make it easier to hack There are times when you need to troubleshoot issues with bundled pjproject or add new features that need to be pushed upstream but... * The source directory created by extracting the pjproject tarball is not scanned for code changes so you have to keep forcing rebuilds. * The source directory isn't a git repo so you can't easily create patches, do git bisects, etc. * Accidentally doing a make distclean will ruin your day by wiping out the source directory, and your changes. * etc. This commit makes that easier. See third-party/pjproject/README-hacking.md for the details. ASTERISK-29824 Change-Id: Idb1251040affdab31d27cd272dda68676da9b268	5 years ago
George Joseph	362b7f2411	BuildSystem: Check for alternate openssl packages OpenSSL is one of those packages that often have alternatives with later versions. For instance, CentOS/EL 7 has an openssl package at version 1.0.2 but there's an openssl11 package from the epel repository that has 1.1.1. This gets installed to /usr/include/openssl11 and /usr/lib64/openssl11. Unfortunately, the existing --with-ssl and --with-crypto ./configure options expect to point to a source tree and don't work in this situation. Also unfortunately, the checks in ./configure don't use pkg-config. In order to make this work with the existing situation, you'd have to run... ./configure --with-ssl=/usr/lib64/openssl11 \ --with-crypto=/usr/lib64/openssl11 \ CFLAGS=-I/usr/include/openssl11 BUT... those options don't get passed down to bundled pjproject so when you run make, you have to include the CFLAGS again which is a big pain. Oh... To make matters worse, although you can specify PJPROJECT_CONFIGURE_OPTS on the ./configure command line, they don't get saved so if you do a make clean, which will force a re-configure of bundled pjproject, those options don't get used. So... * In configure.ac... Since pkg-config is installed by install_prereq anyway, we now use it to check for the system openssl >= 1.1.0. If that works, great. If not, we check for the openssl11 package. If that works, great. If not, we fall back to just checking for any openssl. If pkg-config isn't installed for some reason, or --with-ssl=<dir> or --with-crypto=<dir> were specified on the ./configure command line, we fall back to the existing logic that uses AST_EXT_LIB_CHECK(). * The whole OpenSSL check process has been moved up before THIRD_PARTY_CONFIGURE(), which does the initial pjproject bundled configure, is run. This way the results of the above checks, which may result in new include or library directories, is included. * Although not strictly needed for openssl, We now save the value of PJPROJECT_CONFIGURE_OPTS in the makeopts file so it can be used again if a re-configure is triggered. ASTERISK-29693 Change-Id: I341ab7603e6b156aa15a66f43675ac5029d5fbde	5 years ago
Guido Falsi	17a8d86e1e	pjproject: Remove bashism from configure.m4 script The configure.m4 script for pjproject contains some += syntax, which is specific to bash, replacing it with string substitutions makes the script compatible with traditional Bourne shells. ASTERISK-28866 #close Reported-by: Christoph Moench-Tegeder <cmt@FreeBSD.org> Change-Id: I382a78160e028044598b7da83ec7e1ff42b91c05	6 years ago
Alexander Traud	dd65a66ecb	pjproject_bundled: Honor --without-pjproject. ASTERISK-28837 Change-Id: Id057324912a3cfe6f50af372675626bb515907d9	6 years ago
Alexander Traud	e02290ed4f	pjproject_bundled: Repair ./configure --with-ssl without ARG. ASTERISK-28758 Reported by: Patrick Wakano Reported by: Dmitriy Serov Change-Id: Ifb6b85c559d116739af00bc48d1f547caa85efac	6 years ago
Ben Ford	411d3a2f75	RTP/ICE: Send on first valid pair. When handling ICE negotiations, it's possible that there can be a delay between STUN binding requests which in turn will cause a delay in ICE completion, preventing media from flowing. It should be possible to send media when there is at least one valid pair, preventing this scenario from occurring. A change was added to PJPROJECT that adds an optional callback (on_valid_pair) that will be called when the first valid pair is found during ICE negotiation. Asterisk uses this to start the DTLS handshake, allowing media to flow. It will only be called once, either on the first valid pair, or when ICE negotiation is complete. ASTERISK-28716 Change-Id: Ia7b68c34f06d2a1d91c5ed51627b66fd0363d867	7 years ago
Jean Aunis	d3a6714158	build : Fix cross-compilation errors Bundled pjproject and jansson must be configured with the host and build parameters provided to the configure script. Autotools do not permit to check for the existence of local header files, so the control of hrirs.h must not be done when cross-compiling. ASTERISK-28250 Change-Id: If0a76e52a87d4ab82b7d4c72d27d8759ca931880	8 years ago
Corey Farrell	3bdf6ac918	pjproject-bundled: Use AST_DEVMODE for conditional compilation. We previously allowed resample and g711 codecs to be built when TEST_FRAMEWORK was enabled. This could cause errors if the testsuite was run without this option enabled. Switch the build system to allow those codecs to be built when --enable-dev-mode is used. This removes a chance for strange testsuite errors from use of an inadequate pjsua binary. Change-Id: Iee8a3613cdb711fa7e7d217c5a775a575907ae22	8 years ago
Joshua Colp	60258b4ec1	pjproject: Upgrade to 2.8. This change brings in PJSIP 2.8, removes all the patches that were merged upstream, and makes a minor change to support a breaking change that was done. ASTERISK-28059 Change-Id: I5097772b11b0f95c3c1f52df6400158666f0a189	8 years ago
Alexander Traud	fe78d374b0	pjproject_bundled: Repair ./configure --with-ssl=PATH. Previously, Asterisk did not tell its bundled PJProject about this configure parameter. Therefore, PJProject used the platform provided OpenSSL always. ASTERISK-27880 Change-Id: Iea545aec854dd0e2c061c69bb118a76ce56c5dc6	8 years ago
George Joseph	880fbff6b7	res_pjsip_session: Add ability to accept multiple sdp answers pjproject by default currently will follow media forked during an INVITE on outbound calls if the To tag is different on a subsequent response as that on an earlier response. We handle this correctly. There have been reported cases where the To tag is the same but we still need to follow the media. The pjproject patch in this commit adds the capability to sip_inv and also adds the capability to control it at runtime. The original "different tag" behavior was always controllable at runtime but we never did anything with it and left it to default to TRUE. So, along with the pjproject patch, this commit adds options to both the system and endpoint objects to control the two behaviors, and a small logic change to session_inv_on_media_update in res_pjsip_session to control the behavior at the endpoint level. The default behavior for "different tags" remains the same at TRUE and the default for "same tag" is FALSE. Change-Id: I64d071942b79adb2f0a4e13137389b19404fe3d6 ASTERISK-27936 Reported-by: Ross Beer	8 years ago
Alexander Traud	f697025ae5	BuildSystem: When no download utility is available, display the explanation. ./configure --with-pjproject-bundled did not display an explanation, when no download utility like wget, curl, or fetch was installed beforehand, although an explanation existed in code. This happened because the code expected the variable DOWNLOAD_TO_STDOUT to be empty. However, the script ./configure set that variable always. Change-Id: I64c99b76a03525c69471e5055bf124b36a51bbd4	9 years ago
Joshua Colp	d8c6852bdc	Merge "BuildSystem: pjsip_evsub_set_uas_timeout was not used."	9 years ago
Alexander Traud	7397961b02	BuildSystem: pjsip_evsub_set_uas_timeout was not used. ASTERISK-27435 Change-Id: Id318a7ae6d7d69b53f911d30bf3eece64852f15c	9 years ago
Corey Farrell	b4f7f8250f	Build: Fix OSX build issues. OSX does not support 'readlink -f' or 'sed -r'. Replace readlink with the GNU make macro 'realpath'. Replace sed with grep in one place, cut in the other. ASTERISK-27332 Change-Id: I5d34ecca905384decb22ead45c913ae5e8aff748	9 years ago
George Joseph	305bd0d99f	Make --with-pjproject-bundled the default for Asterisk 15 '--with-pjproject-bundled' is now the default when running ./configure. It can be disabled with '--without-pjproject-bundled'. To make building without an internet connection easier, a new ./configure option '--with-download-cache' was added that sets the cache for externals (like pjproject, the codecs and the DPMA), AND the sounds files. It can also be specified as an environment variable named "AST_DOWNLOAD_CACHE". The existing '--with-sounds-cache' option / SOUNDS_CACHE_DIR env variable and '--with-externals-cache' option / EXTERNALS_CACHE_DIR env variable remain and if specified, will override '--with-downloads-cache'. ASTERISK-27189 Change-Id: Ifa9783fddf44aafadb060c9feba713dfa81d38ce	9 years ago
George Joseph	f573e599c0	pjproject_bundled: Allow passing configure options to bundled There wasn't any good way to pass options like --host or --build down to the pjproject configure which makes cross-compiling difficult. * Added a new PJPROJECT_CONFIGURE_OPTS environment variable which can be used to pass arbitrary options to pjproject configure. * Automatically set the pjproject configure --host and --build options to match those supplied for the asterisk configure. ASTERISK-27097 #close Reported-by: Kinsey Moore Change-Id: I5fa776e110262851173002a26ffe1172e4c35b2e	9 years ago
George Joseph	01e9eaf3a6	pjproject_bundled: Add 3 upstream patches 0035-r5572-svn-backport-dialog-transaction-deadlock.patch 0036-r5573-svn-backport-ua-pjsua-transaction-deadlock.patch 0037-r5576-svn-backport-session-timer-crash.patch Also removed the progress bar from wget download to stdout. ASTERISK-26905 #close Reported-by: Ross Beer Change-Id: I268fb3cf71a3bb24283ff0d24bd8b03239d81256	10 years ago
George Joseph	4bdf5d329f	res_pjsip_pubsub: Correctly implement persisted subscriptions This patch fixes 2 original issues and more that those 2 exposed. * When we send a NOTIFY, and the client either doesn't respond or responds with a non OK, pjproject only calls our pubsub_on_evsub_state callback, no others. Since pubsub_on_evsub_state (which does the sub_tree cleanup) does not expect to be called back without the other callbacks being called first, it just returns leaving the sub_tree orphaned. Now pubsub_on_evsub_state checks the event for PJSIP_EVENT_TSX_STATE which is what pjproject will set to tell us that it was the transaction that timed out or failed and not the subscription itself timing our or being terminated by the client. If is TSX_STATE, pubsub_on_evsub_state now does the proper cleanup regardless of the state of the subscription. * When a client renews a subscription, we don't update the persisted subscription with the new expires timestamp. This causes subscription_persistence_recreate to prune the subscription if/when asterisk restarts. Now, pubsub_on_rx_refresh calls subscription_persistence_update to apply the new expires timestamp. This exposed other issues however... * When creating a dialog from rdata (which sub_persistence_recreate does from the packet buffer) there must NOT be a tag on the To header (which there will be when a client refreshes a subscription). If there is one, pjsip_dlg_create_uas will fail. To address this, subscription_persistence_update now accepts a flag that indicates that the original packet buffer must not be updated. New subscribes don't set the flag and renews do. This makes sure that when the rdata is recreated on asterisk startup, it's done from the original subscribe packet which won't have the tag on To. * When creating a dialog from rdata, we were setting the dialog's remote (SUBSCRIBE) cseq to be the same as the local (NOTIFY) cseq. When the client tried to resubscribe after a restart with the correct cseq, we'd reject the request with an Invalid CSeq error. * The acts of creating a dialog and evsub by themselves when recreating a subscription does NOT restart pjproject's subscription timer. The result was that even if we did correctly recreate the subscription, we never removed it if the client happened to go away or send a non-OK response to a NOTIFY. However, there is no pjproject function exposed to just set the timer on an evsub that wasn't created by an incoming subscribe request. To address this, we create our own timer using ast_sip_schedule_task. This timer is used only for re-establishing subscriptions after a restart. An earlier approach was to add support for setting pjproject's timer (via a pjproject patch) and while that patch is still included here, we don't use that call at the moment. While addressing these issues, additional debugging was added and some existing messages made more useful. A few formatting changes were also made to 'pjsip show scheduled tasks' to make displaying the subscription timers a little more friendly. ASTERISK-26696 ASTERISK-26756 Change-Id: I8c605fc1e3923f466a74db087d5ab6f90abce68e	10 years ago
George Joseph	d3f070c7a2	pjproject_bundled: Improve reliability of pjproject download The download process now has a timeout which will cause wget to retry if it stops retrieving data for 5 seconds and fetch and curl to timeout if the whole retrieval take smore than 30 seconds. If the tarball retrieval works, the MD5SUM file is retrieved from the downloads site and the md5 checksum is verified. If either the tarball retrieval or MD5SUM retrieval fails, or the checksums don't match, the entire process is retried once. If it fails again, any incomplete tarball is deleted. .DELETE_ON_ERROR: was also added to the Makefile. Not only does this delete the tarball on failure, it till also delete corrupted library files from the pjproject source directory should they fail to build correctly. Tested all the way back to FreeBSD 9, CentOS 6, Debian 6 and Ubuntu 14. Change-Id: Iea7d33b96a31622ab1b6e54baebaf271959514e1	10 years ago
Richard Mudgett	0cd0e70c16	res_pjsip_outbound_authenticator_digest.c: Fix memory pool leak. Responding to authentication challenges leaks PJSIP memory pools. The leak was introduced with a pjproject 2.5.5 API change. https://trac.pjsip.org/repos/ticket/1929 changed the API usage of pjsip_auth_clt_init() to require the new API pjsip_auth_clt_deinit() to clean up cached authentication allocations that get allocated with pjsip_auth_clt_reinit_req(). ASTERISK-26516 #close Change-Id: I4473141b8c3961d0dc91c382beb3876b3efb45c8	10 years ago
George Joseph	16c23b57c7	pjproject_bundled: Fixed various build issues * CFLAGS is now properly set when using older gcc. * All third-party pjproject targets have been removed. This fixes an issue with older libsrtp in some distros. * Manually removing the source directory now causes a rebuild. * EXTERNALS_CACHE_DIR is now properly checked. * Whitespace fixes. Change-Id: I98fec6847efc5602a9f41cb95096fd660a49fa60	10 years ago
Corey Farrell	aa39a87697	Fix issues with bundled pjproject cached download. Previously when testing I had a preexisting makeopts in ASTTOPDIR. The ordering of configure.ac causes --with-externals-cache to be processed after third-party configure. In cases where the Asterisk clone is cleaned it would cause pjproject to be downloaded to /tmp. This moves processing of the externals cache and sounds cache to happen before third-party configure. This also addresses a possible issue with the third-party Makefile. If TMPDIR is set by the environment it would override the path given to --with-externals-cache. ASTERISK-26416 Change-Id: Ifab7f35bfcd5a31a31a3a4353cc26a68c8c6592d	10 years ago
George Joseph	5fb848eebd	bundled_pjproject: Add tests for programs used by the Makefile, et al. Added tests for bzip2, tar, patch, sed and nm to configure.ac. Set DOWNLOAD_TO_STDOUT to a working command line regardless of whether the download program is wget, curl or fetch. Added a 'configure.m4' file to the third-party directory which takes care of calling any third-party project setup. Had to move some pjproject_bundled stuff up in configure.ac so it was called before the third-party configure macro. The pjproject tarball is now downloaded to the externals_cache_dir if it was specified on the ./configure command line Removed regeneration of the pjproject aconfigure file. It was only needed for an old patch that no longer applies. Converted the tests for symbols to explicit tests since we know that they're now available in the bundled version. Saves a little time during configure. ASTERISK-26416 #close Reported-by: Corey Farrell Change-Id: Id1d94251c0155f8dd41b7de7067f35cfbaafbb9b (cherry picked from commit `e6b0053d75`) (cherry picked from commit `a0d02f3832`)	10 years ago
Alexei Gradinari	7bb7f7b9d5	res_pjsip_session: segfault on already disconnected session On heavy loaded system the TCP/TLS incoming calls could be disconnected by pjproject while these calls are being processed by asterisk which could use the session's memory pools. If the session in the disconnected state then the session memory pools were already freed, so we get segfault. This patch adds a lifetime control on an INVITE session to pjproject. The lifetime of the session is manipulated by calling pjsip_inv_add_ref/pjsip_inv_dec_ref. This patch uses these functions to inform pjproject that the session is in use. This patch adds check if the session state is not disconnected and also checks if the memory pool is not NULL. This patch also places tasks 'session_end' and 'session_end_completion' into session's serializer to avoid race condition. ASTERISK-26291 #close Change-Id: I4d28b1fb3b91f0492a911d110049d670fdc3c8d7	10 years ago
George Joseph	b57cd01404	res_pjsip_pubsub: Address SEGV when attempting to terminate a subscription Occasionally under load we'll attempt to send a final NOTIFY on a subscription that's already been terminated and a SEGV will occur down in pjproject's evsub_destroy function. This is a result of a race condition between all the paths that can generate a notify and/or destroy the underlying pjproject evsub object: * The client can send a SUBSCRIBE with Expires: 0. * The client can send a SUBSCRIBE/refresh. * The subscription timer can expire. * An extension state can change. * An MWI event can be generated. * The pjproject transaction timer (timer_b) can expire. Normally when our pubsub_on_evsub_state is called with a terminate, we push a task to the serializer and return at which point the dialog is unlocked. This is usually not a problem because the task runs immediately and locks the dialog again. When the system is heavily loaded though, there may be a delay between the unlock and relock during which another event may occur such as the subscription timer or timer_b expiring, an extension state change, etc. These may also cause a terminate to be processed and if so, we could cause pjproject to try to destroy the evsub structure twice. There's no way for us to tell that the evsub was already destroyed and the evsub's group lock can't tolerate this and SEGVs. The remedy is twofold. * A patch has been submitted to Teluu and added to the bundled pjproject which adds add/decrement operations on evsub's group lock. * In res_pjsip_pubsub: * configure.ac and pjproject-bundled's configure.m4 were updated to check for the new evsub group lock APIs. * We now add a reference to the evsub group lock when we create the subscription and remove the reference when we clean up the subscription. This prevents evsub from being destroyed before we're done with it. * A state has been added to the subscription tree structure so termination progress can be tracked through the asyncronous tasks. * The pubsub_on_evsub_state callback has been split so it's not doing double duty. It now only handles the final cleanup of the subscription tree. pubsub_on_rx_refresh now handles both client refreshes and client terminates. It was always being called for both anyway. * The serialized_on_server_timeout task was removed since serialized_pubsub_on_rx_refresh was almost identical. * Missing state checks and ao2_cleanups were added. * Some debug levels were adjusted to make seeing only off-nominal things at level 1 and nominal or progress things at level 2+. ASTERISK-26099 #close Reported-by: Ross Beer. Change-Id: I779d11802cf672a51392e62a74a1216596075ba1	10 years ago
George Joseph	e61716b774	pjproject_bundled: Various fixes discovered during testing of OSes For all OSes: * Disabled third-party codecs in pjproject and added '--disable-speex-codec --disable-speex-aec --disable-gsm-codec' to the configure options since we don't use the pjsip codec capability. FreeBSD: * Added FreeBSD support to install_prereq. * Changed pjproject/configure.m4 to use $GNU_MAKE instead of hardcoding "make". * Added __progname and environ to asterisk.exports.in. * Reverted the use of ldconfig to create shared library symlinks to ln. * Only enable epoll in pjproject if `uname -s` is Linux. * Added a patch to pjproject to take the name of the 'make' command from an environment variable if supplied. This is needed for the python bindings. (merged by Teluu into pjproject trunk 5/3/2016) FreeBSD support isn't complete. Still some general issues regarding make/gmake having nothing to do with pjproject. With some handholding it DOES build successfully. CentOS: Added 'patch' and 'bzip2' to install_prereq PACKAGES_RH. CentOS 6/7 32/64 build and run the pjsip testsuite successfully. Ubuntu: No changes required. Ubuntu 15/16 32/64 build and run the pjsip testsuite successfully. Debian: No changes required. Debian 6/7/8 32/64 build and run the pjsip testsuite successfully. There will utimately be a follow-up patch to create an install_prereq for the testsuite as I've discovered a few missing requirements. ASTERISK-25968 #close Change-Id: I5756a07facfc63798115a5e73a8709382fe9259c	10 years ago
Joshua Colp	4df7b3ae80	build: Add configure check for proto field of PJSIP TLS transport setting. Older versions of PJSIP do not have the proto field on the TLS transport setting structure. This change adds a configure check so even if it is not present we will still be able to build. Change-Id: Ibf3f47befb91ed1b8194bf63888baa6fee05aba9	11 years ago
George Joseph	3173e91bab	build-system: Allow building with static pjproject Background here: http://lists.digium.com/pipermail/asterisk-dev/2016-January/075266.html From CHANGES: * To help insure that Asterisk is compiled and run with the same known version of pjproject, a new option (--with-pjproject-bundled) has been added to ./configure. When specified, the version of pjproject specified in third-party/versions.mak will be downloaded and configured. When you make Asterisk, the build process will also automatically build pjproject and Asterisk will be statically linked to it. Once a particular version of pjproject is configured and built, it won't be configured or built again unless you run a 'make distclean'. To facilitate testing, when 'make install' is run, the pjsua and pjsystest utilities and the pjproject python bindings will be installed in ASTDATADIR/third-party/pjproject. The default behavior remains building with the shared pjproject installation, if any. Building: All you have to do is include the --with-pjproject-bundled option on the ./configure command line (and remove any existing --with-pjproject option if specified). Everything else is automatic. Behind the scenes: The top-level Makefile was modified to include 'third-party' in the list of MOD_SUBDIRS. The third-party directory was created to contain any third party packages that may be needed in the future. Its Makefile automatically iterates over any subdirectories passing on targets. The third-party/pjproject directory was created to house the pjproject source distribution. Its Makefile contains targets to download, patch configure, generate dependencies, compile libs, apps and python bindings, sanitized build.mak and generate a symbols list. When bootstrap.sh is run, it automatically includes the configure.m4 file in third-party/pjproject. This file has a macro to download and conifgure pjproject and get and set PJPROJECT_INCLUDE, PJPROJECT_DIR and PJPROJECT_BUNDLED. It also tests for the capabilities like PJ_TRANSACTION_GRP_LOCK by parsing preprocessor output as opposed to trying to compile. Of course, bootstrap.sh is only run once and the configure file is incldued in the patch. When configure is run with the new options, the macro in configure.m4 triggers the download, patch, conifgure and tests. No compilation is performed at this time. The downloaded tarball is cached in /tmp so it doesn't get downloaded again on a distclean. When make is run in the top-level Asterisk source directory, it will automatically descend all the subdirectories in third_party just as it does for addons, apps, etc. The top-level Makefile makes sure that the 'third-party' is built before 'main' so that dependencies from the other directories are built first. When main does build, a new shared library (libasteriskpj) is created that links statically to the pjproject .a files and exports all their symbols. The asterisk binary links to that, just as it does with libasteriskssl. When Asterisk is installed, the pjsua and pjsystest apps, and the pjproject python bindings are installed in ASTDATADIR/third-party/pjproject. This will facilitate testing, including running the testsuite which will be updated to check that directory for the pjsua module ahead of the system python library. Modules should continue to depend on pjproject if they use pjproject APIs directly. They should not care about the implementation. No changes to any res_pjsip modules were made. Change-Id: Ia7a60c28c2e9ba9537c5570f933c1ebcb20a3103	11 years ago

29 Commits (development/16/python3)