asterisk

Commit Graph

Author	SHA1	Message	Date
George Joseph	5fdf6e4e18	build: Fix issues building pjproject The change to allow easier hacking on bundled pjproject created a few issues: * The new Makefile was trying to run the bundled make even if PJPROJECT_BUNDLED=no. third-party/Makefile now checks for PJPROJECT_BUNDLED and JANSSON_BUNDLED and skips them if they are "no". * When building with bundled, config_site.h was being copied only if a full make or a "make main" was done. A "make res" would fail all the pjsip modules because they couldn't find config_site.h. The Makefile now copies config_site.h and asterisk_malloc_debug.h into the pjproject source tree when it's "configure" is performed. This is how it used to be before the big change. ASTERISK-29858 Change-Id: I9427264fa3cb8b3f59a95e5f9693eac236a6f76d	5 years ago
George Joseph	d014cedf5d	bundled_pjproject: Make it easier to hack There are times when you need to troubleshoot issues with bundled pjproject or add new features that need to be pushed upstream but... * The source directory created by extracting the pjproject tarball is not scanned for code changes so you have to keep forcing rebuilds. * The source directory isn't a git repo so you can't easily create patches, do git bisects, etc. * Accidentally doing a make distclean will ruin your day by wiping out the source directory, and your changes. * etc. This commit makes that easier. See third-party/pjproject/README-hacking.md for the details. ASTERISK-29824 Change-Id: Idb1251040affdab31d27cd272dda68676da9b268	5 years ago
George Joseph	362b7f2411	BuildSystem: Check for alternate openssl packages OpenSSL is one of those packages that often have alternatives with later versions. For instance, CentOS/EL 7 has an openssl package at version 1.0.2 but there's an openssl11 package from the epel repository that has 1.1.1. This gets installed to /usr/include/openssl11 and /usr/lib64/openssl11. Unfortunately, the existing --with-ssl and --with-crypto ./configure options expect to point to a source tree and don't work in this situation. Also unfortunately, the checks in ./configure don't use pkg-config. In order to make this work with the existing situation, you'd have to run... ./configure --with-ssl=/usr/lib64/openssl11 \ --with-crypto=/usr/lib64/openssl11 \ CFLAGS=-I/usr/include/openssl11 BUT... those options don't get passed down to bundled pjproject so when you run make, you have to include the CFLAGS again which is a big pain. Oh... To make matters worse, although you can specify PJPROJECT_CONFIGURE_OPTS on the ./configure command line, they don't get saved so if you do a make clean, which will force a re-configure of bundled pjproject, those options don't get used. So... * In configure.ac... Since pkg-config is installed by install_prereq anyway, we now use it to check for the system openssl >= 1.1.0. If that works, great. If not, we check for the openssl11 package. If that works, great. If not, we fall back to just checking for any openssl. If pkg-config isn't installed for some reason, or --with-ssl=<dir> or --with-crypto=<dir> were specified on the ./configure command line, we fall back to the existing logic that uses AST_EXT_LIB_CHECK(). * The whole OpenSSL check process has been moved up before THIRD_PARTY_CONFIGURE(), which does the initial pjproject bundled configure, is run. This way the results of the above checks, which may result in new include or library directories, is included. * Although not strictly needed for openssl, We now save the value of PJPROJECT_CONFIGURE_OPTS in the makeopts file so it can be used again if a re-configure is triggered. ASTERISK-29693 Change-Id: I341ab7603e6b156aa15a66f43675ac5029d5fbde	5 years ago
Kevin Harwell	82ce3b7620	pjproject: Upgrade bundled version to pjproject 2.10 This patch makes the usual necessary changes when upgrading to a new version pjproject. For instance, version number bump, patches removed from third-party, new *.md5 file added, etc.. This patch also includes a change to the Asterisk pjproject Makefile to explicitly create the 'source/pjsip-apps/lib' directory. This directory is no longer there by default so needs to be added so the Asterisk malloc debug can be built. This patch also includes some minor changes to Asterisk that were a result of the upgrade. Specifically, there was a backward incompatibility change made in 2.10 that modified the "expires header" variable field from a signed to an unsigned value. This potentially effects comparison. Namely, those check for a value less than zero. This patch modified a few locations in the Asterisk code that may have been affected. Lastly, this patch adds a new macro PJSIP_MINVERSION that can be used to check a minimum version of pjproject at compile time. ASTERISK-28899 #close Change-Id: Iec8821c6cbbc08c369d0e3cd2f14e691b41d0c81	6 years ago
Alexander Traud	bde6be092c	_pjsua: Build even with Clang. Change-Id: Iebf7687613aa0295ea3c82256460b337f1595be2	6 years ago
George Joseph	543d487746	build: Pass --fno-partial-inlining to third-party when appropriate When the gcc version is >= 8.2.1, we were already setting the --fno-partial-inlining flag for Asterisk source files to get around a gcc bug but we weren't passing the flag down to the bundled builds of pjproject and jansson. ASTERISK-28392 Change-Id: I99ede9bc35408ecd096f7d5369e8192d3dc75704	7 years ago
Corey Farrell	3bdf6ac918	pjproject-bundled: Use AST_DEVMODE for conditional compilation. We previously allowed resample and g711 codecs to be built when TEST_FRAMEWORK was enabled. This could cause errors if the testsuite was run without this option enabled. Switch the build system to allow those codecs to be built when --enable-dev-mode is used. This removes a chance for strange testsuite errors from use of an inadequate pjsua binary. Change-Id: Iee8a3613cdb711fa7e7d217c5a775a575907ae22	8 years ago
Corey Farrell	d61a8791b5	Build System: Improve ccache matching for different menuselect options. Changing any Menuselect option in the `Compiler Flags` section causes a full rebuild of the Asterisk source tree. Every enabled option causes a #define to be added to buildopts.h, thus breaking ccache caching for every source file that includes "asterisk.h". In most cases each option only applies to one or two files. Now we only define those options for the specific sources which use them, this causes much better cache matching when working with multiple builds. For example testing code with an without MALLOC_DEBUG will now use just over half the ccache size, only main/astmm.o will have two builds cached instead of every file. Reorder main/Makefile so _ASTCFLAGS set on specific object files are all together, sorted by filename. Stop adding -DMALLOC_DEBUG to CFLAGS of bundled pjproject, this define is no longer used by any header so only serves to break cache. The only code change is a slight adjustment to how main/astmm.c is initialized. Initialization functions always exist so main/asterisk.c can call them unconditionally. Additionally rename the astmm initialization functions so they are not exported. Change-Id: Ie2085237a964f6e1e6fff55ed046e2afff83c027	8 years ago
Corey Farrell	d2dace81d4	Enable bundling of jansson, require 2.11. Change-Id: Ib3111b151d37cbda40768cf2a8a9c6cf6c5c7cbd	8 years ago
Richard Mudgett	5febc995df	Build: Fix modules getting their optimization setting overridden. Asterisk modules that use PJPROJECT services have their compiler optimization and possibly their symbolic debug options overridden by the PJPROJECT configure script selected settings. * We need to filter-out any -O and -g options in PJ_CFLAGS before echoing out the result so the PJPROJECT_INCLUDE variable does not override the Asterisk module settings when using bundled PJPROJECT. NOTE: This patch only has an effect when using bundled PJPROJECT. ASTERISK-27563 Change-Id: If124169735ecf572ad1535cd43bff94cb44d5b30	8 years ago
Richard Mudgett	c711e4076a	core: Remove ABI effects of MALLOC_DEBUG. This allows asterisk to be compiled with MALLOC_DEBUG to load modules built without MALLOC_DEBUG. Now pre-compiled third-party modules will still work regardless of MALLOC_DEBUG being enabled or not. Change-Id: Ic07ad80b2c2df894db984cf27b16a69383ce0e10	9 years ago
Corey Farrell	b4f7f8250f	Build: Fix OSX build issues. OSX does not support 'readlink -f' or 'sed -r'. Replace readlink with the GNU make macro 'realpath'. Replace sed with grep in one place, cut in the other. ASTERISK-27332 Change-Id: I5d34ecca905384decb22ead45c913ae5e8aff748	9 years ago
Corey Farrell	fb585cf185	Bundled pjproject: Enable pj_assert when dev-mode is enabled. ASTERISK-27359 Change-Id: Ib01fb6c01f9bb87129374a51cb9318c474147517	9 years ago
Richard Mudgett	c049d1c3b2	configure: Check cache for valid pjproject tarball before downloading. On a fresh Asterisk source directory, the bundled pjproject tarball is unconditionally downloaded even if the tarball is already in a specified cache directory. * Made check if the pjproject tarball is valid in the cache directory before downloading the tarball on a fresh source directory. Change-Id: Ic7ec842d3c97ecd8dafbad6f056b7fdbce41cae5	9 years ago
George Joseph	b2fd7e5069	pjproject_bundled: Use the asterisk github mirror for download We now mirror the pjproject tarball and md5 at https://github.com/asterisk/third-party/tree/master/pjproject To improve download reliability, we now get the tarball from our mirror instead of from pjsip.org. ASTERISK-27052 #close Reported-by: 'alex' Change-Id: I60236587a8935bfa71fcc391f4e2ecb31918c08a	9 years ago
Kevin Harwell	12dde3b568	pjproject_bundled: raise timeout value used when downloading After configuring Asterisk with '--with-pjproject-bundled' the configure/build process attempts to download pjproject from its download site. Currently, a timeout of 10 seconds is used that will stop the download process if pjproject has not been fully downloaded in that time. For some systems this was not enough time and the process was timing out too early. This patch raises the download timeout value to '60'. Also, this patch fixes another bug where the DOWNLOAD_TIMEOUT variable was not being properly exported due to a naming error. DOWNLOAD_MAX_TIMEOUT is now properly renamed to DOWNLOAD_TIMEOUT. ASTERISK-26814 #close Change-Id: Ia56e4e8a3d39db76bc8a1852b2cf07ec10b39842	10 years ago
George Joseph	d1ef127084	pjproject_bundled: Reduce the need for rebuilds Bundled pjproject should now only rebuild if one of the menuselect "Compiler Flags" options changes. Change-Id: If114a2e16b9e77af371a600d6a5e197bbf28fe43	10 years ago
George Joseph	96e7291cbd	pjproject_bundled: Fix setting max log level An earlier attempt to prevent pjsua from spitting out an extra 6795 lines of debug output every time the testsuite called it was also turning off the ability for asterisk to output debug info when it needed to. This patch reverts the earlier fix and instead adds a pjproject patch that sets the startup log level to 1 for pjsua pjsystest and the pjsua python binding. This is an asterisk-only patch that does not affect pjproject functionality and will not be submitted upstream. Change-Id: I347a8b58b2626f2906ccfc1d339e907627a0c9e8	10 years ago
George Joseph	e54c8aec34	pjproject_bundled: Fix compilation with MALLOC_DEBUG When MALLOC_DEBUG was specified, make was failing. Immediately remaking would work. The issues was in the ordering of the make dependencies. Change-Id: If6030b54fc693f3179f32bfd20c6b5d5f1b3f7cd	10 years ago
George Joseph	ceb9dae566	pjproject_bundled: Compile pjsua with max log level = 2 A while back, we changed config_site.h to set PJ_LOG_MAX_LEVEL = 6. This allowed us to control the log level better from inside Asterisk. An unfortunate side effect of this was that the pjsua binary and python bindings were also compiled with log level set to 6 so whenever a testsuite test that uses pjsua runs, it spits out 6795 lines of debug in an instant even before the test starts. I believe this overruns the Jenkins capture buffer and prevents the test from properly terminating. In turn, this results in the testsuite just hanging until the job is killed. It's more frequent on the higher end agents because they can spit out the messages faster. Unfortunately, the messages are all spit out before we have control of the python pj.Lib instance where we can set logging levels so the only alternative was to actually compile pjsua and _pjsua.so with an overridden PJ_LOG_MAX_LEVEL. Although defining a lower max level was done in the Makefile, the define in config_site.h had to be wrapped with "#ifndef" so the change would take effect. Change-Id: I2af9e7d48dde1927279c586c9c725d868fe6f3ff	10 years ago
George Joseph	d29eb3b99d	pjproject_bundled: Make build single threaded There were just too many issues in various environments with multi threaded building of pjproject. It doesn't really speed things up anyway since asterisk is already being compiled in parallel. Change-Id: Ie5648fb91bb89b4224b6bf43a0daa1af793c4ce1	10 years ago
George Joseph	31268e0a28	pjproject_bundled: Retry download if previously saved tarball is bad If a tarball is corrupted during download, the makefile will attempt to download it again. If the tarball somehow gets corrupted after it's downloaded however, the makefile was just failing. We now retry the download. ASTERISK-26653 #close Change-Id: I1b24d454852d80186f60c5a65dc4624ea8a1c359	10 years ago
George Joseph	fe9f070885	pjproject_bundled: Fix missing inclusion of symbols Added back in a -g3, and an -O3 when DONT_OPTIMIZE is not set, to the CFLAGS. Not sure how they went missing. Also fixed an uninstall problem where we weren't removing the symlink from libasteriskpj.so.2 to libasteriskpj.so. While I was there, I fixed it for libasteriskssl as well. Change-Id: I9e00873b1e9082d05b5549d974534b48a2142556	10 years ago
zuul	aa9d91c290	Merge "pjproject_bundled: Improve reliability of pjproject download"	10 years ago
George Joseph	d3f070c7a2	pjproject_bundled: Improve reliability of pjproject download The download process now has a timeout which will cause wget to retry if it stops retrieving data for 5 seconds and fetch and curl to timeout if the whole retrieval take smore than 30 seconds. If the tarball retrieval works, the MD5SUM file is retrieved from the downloads site and the md5 checksum is verified. If either the tarball retrieval or MD5SUM retrieval fails, or the checksums don't match, the entire process is retried once. If it fails again, any incomplete tarball is deleted. .DELETE_ON_ERROR: was also added to the Makefile. Not only does this delete the tarball on failure, it till also delete corrupted library files from the pjproject source directory should they fail to build correctly. Tested all the way back to FreeBSD 9, CentOS 6, Debian 6 and Ubuntu 14. Change-Id: Iea7d33b96a31622ab1b6e54baebaf271959514e1	10 years ago
George Joseph	935f5d003b	build: Various OpenBSD issues OpenBSD's 'find' doesn't take the -delete argument so you have to pipe through 'xargs rm -rf'. 'echo -e' doesn't like \t starting a line. It just prints 't' which causes the libasteriskpj.exports file to be garbage. They were just cosmetic so they were removed. librt doesn't exist so the link of libasteriskpj.so fails. It's not actually needed for linux anyway so -lrt was removed from the link. res_rtp_asterisk was failing to load because of an undefined DTLS_method. '\|\| defined(LIBRESSL_VERSION_NUMBER)' was added to the #if so DTLSv1_method is used instead. ASTERISK-26608 Change-Id: I926ec95b0b69633231e3ad1d6e803b977272c49c	10 years ago
George Joseph	78dc6ceaf6	pjproject_bundled: Fix issue with libasteriskpj needing libresample libresample is only needed by pjproject if we're building pjsua, which we only do if TEST_FRAMEWORK is selected. It's required by pjsua to process audio which is needed by some testsuite tests. Unfortunately, pjproject relies on a newer version of libresample than the version that ships by most distros so we need to compile the version that's bundled with pjproject. Since we only need it for pjsua, we DON'T want it's symbols exposed when we actually build asterisk. There was a problem however... TEST_FRAMEWORK is only known AFTER we've already run ./configure on both asterisk and pjproject but pjproject's ./configure needs to test it to know whether to set up to build libresample or not. The previous way of figuring this out was to always tell ./configure "yes" but not actually build the library. This caused an issue where building libasteriskpj was being told to include libresample but it wasn't actually there. The solution is to still do a default pjproject configure during an asterisk ./configure but if makeopts or menuselect.makeopts changes subsequently, we now reconfigure pjproject, taking into account the current state of TEST_FRAMEWORK. Previously, if makeopts or menuselect.makeopts changed, only a recompile of pjproject was done. Change-Id: I9b5d84c61384a3ae07fe30e85c49698378cc4685	10 years ago
George Joseph	f27f837a9f	pjproject_bundled: Fix compile of pjsua so it handles audio In order for pjsua and its python binding to actually negotiate audio for the testsuite tests, it needs g711 and resample. The pj* libraries themselves do not. Unfortunately, pjproject relies on a brand new libresample that most distros don't ship so we need to use the libresample already bundled with pjproject. Only the pjsua executable and the _pjsua.so python library are linked with it so it shouldn't interfere with asterisk itself. Also it was pointed out that apply_patches couldn't handle multiple patches that depended on each other during the dry-run, so the dry-run was removed. Change-Id: I24f397462b486dcdde0dcafe40e6c55a6593f098	10 years ago
George Joseph	4f45d62653	pjproject_bundled: Remove usage of tar's --strip-components option Older versions of tar don't support the --strip-components option so instead of doing 'tar --strip-components=1 -C source', we now just untar to the tarball's root directory (pjproject-<version>) and rename that directory to 'source'. Also fixed an issue where the pjproject source directory is a hard coded absolute pathname. ASTERISK-26510 #close ASTERISK-22480 #close Change-Id: I9ec92952507a91ff4e4d01e0149e09fd8e8f32b0	10 years ago
George Joseph	16c23b57c7	pjproject_bundled: Fixed various build issues * CFLAGS is now properly set when using older gcc. * All third-party pjproject targets have been removed. This fixes an issue with older libsrtp in some distros. * Manually removing the source directory now causes a rebuild. * EXTERNALS_CACHE_DIR is now properly checked. * Whitespace fixes. Change-Id: I98fec6847efc5602a9f41cb95096fd660a49fa60	10 years ago
Corey Farrell	aa39a87697	Fix issues with bundled pjproject cached download. Previously when testing I had a preexisting makeopts in ASTTOPDIR. The ordering of configure.ac causes --with-externals-cache to be processed after third-party configure. In cases where the Asterisk clone is cleaned it would cause pjproject to be downloaded to /tmp. This moves processing of the externals cache and sounds cache to happen before third-party configure. This also addresses a possible issue with the third-party Makefile. If TMPDIR is set by the environment it would override the path given to --with-externals-cache. ASTERISK-26416 Change-Id: Ifab7f35bfcd5a31a31a3a4353cc26a68c8c6592d	10 years ago
George Joseph	5fb848eebd	bundled_pjproject: Add tests for programs used by the Makefile, et al. Added tests for bzip2, tar, patch, sed and nm to configure.ac. Set DOWNLOAD_TO_STDOUT to a working command line regardless of whether the download program is wget, curl or fetch. Added a 'configure.m4' file to the third-party directory which takes care of calling any third-party project setup. Had to move some pjproject_bundled stuff up in configure.ac so it was called before the third-party configure macro. The pjproject tarball is now downloaded to the externals_cache_dir if it was specified on the ./configure command line Removed regeneration of the pjproject aconfigure file. It was only needed for an old patch that no longer applies. Converted the tests for symbols to explicit tests since we know that they're now available in the bundled version. Saves a little time during configure. ASTERISK-26416 #close Reported-by: Corey Farrell Change-Id: Id1d94251c0155f8dd41b7de7067f35cfbaafbb9b (cherry picked from commit `e6b0053d75`) (cherry picked from commit `a0d02f3832`)	10 years ago
George Joseph	c5e8f50169	pjproject_bundled: Add MALLOC_DEBUG capability pjproject_bundled will now use the asterisk memory debugging APIs if MALLOC_DEBUG is turned on in menuselect. Because this required stubs for the executable programs and the python bindings, some Makefile reorganization was needed to properly handle the dependencies. As a result, the makefile now individually makes each of the pjproject libraries separately instead of making them all in 1 shot. The only visible change is that there are separate status lines printed for each library instead oif 1 for all libs. Also, the making of the pjproject dependency files was eliminated. They're not needed for building unless you're actively modifying pjproject source files and it makes the build process faster. Finally, any issues with parallel builds should be resolved again making the build faster. Change-Id: Icc5e3d658fbfb00e0a46b44c66dcc2522d5171b0	10 years ago
George Joseph	facce6f632	pjproject_bundled: Check for python-dev and TEST_FRAMEWORK The pjsua and pjsystest apps are now built only if TEST_FRAMEWORK is set. The python bindings are now built only if TEST_FRAMEWORK is set and a python development package is installed. libresample was also disabled. ASTERISK-25993 #close Reported-by: Joshua Colp Change-Id: If4e91c503a02f113d5b71bc8b972081fa3ff6f03	10 years ago
George Joseph	e61716b774	pjproject_bundled: Various fixes discovered during testing of OSes For all OSes: * Disabled third-party codecs in pjproject and added '--disable-speex-codec --disable-speex-aec --disable-gsm-codec' to the configure options since we don't use the pjsip codec capability. FreeBSD: * Added FreeBSD support to install_prereq. * Changed pjproject/configure.m4 to use $GNU_MAKE instead of hardcoding "make". * Added __progname and environ to asterisk.exports.in. * Reverted the use of ldconfig to create shared library symlinks to ln. * Only enable epoll in pjproject if `uname -s` is Linux. * Added a patch to pjproject to take the name of the 'make' command from an environment variable if supplied. This is needed for the python bindings. (merged by Teluu into pjproject trunk 5/3/2016) FreeBSD support isn't complete. Still some general issues regarding make/gmake having nothing to do with pjproject. With some handholding it DOES build successfully. CentOS: Added 'patch' and 'bzip2' to install_prereq PACKAGES_RH. CentOS 6/7 32/64 build and run the pjsip testsuite successfully. Ubuntu: No changes required. Ubuntu 15/16 32/64 build and run the pjsip testsuite successfully. Debian: No changes required. Debian 6/7/8 32/64 build and run the pjsip testsuite successfully. There will utimately be a follow-up patch to create an install_prereq for the testsuite as I've discovered a few missing requirements. ASTERISK-25968 #close Change-Id: I5756a07facfc63798115a5e73a8709382fe9259c	10 years ago
George Joseph	638133131a	pjproject: Pass (dont_)optimize flags to pjproject and fix pjsua The pjproject Makefile now uses the Asterisk optimization flags which are determined by the setting of the DONT_OPTMIZE menuselect flag. The Makefile was also restructured so a change to the top level menuselect.makeopts will result in a rebuild of pjproject. Also, "--disable-resample" was removed from the pjproject configure options. Without resample, pjsua (which is used by the testsuite) can't make audio calls. When it can't, it segfaults. Change-Id: I24b0a4d0872acef00ed89b3c527a713ee4c2ccd4	11 years ago
George Joseph	3173e91bab	build-system: Allow building with static pjproject Background here: http://lists.digium.com/pipermail/asterisk-dev/2016-January/075266.html From CHANGES: * To help insure that Asterisk is compiled and run with the same known version of pjproject, a new option (--with-pjproject-bundled) has been added to ./configure. When specified, the version of pjproject specified in third-party/versions.mak will be downloaded and configured. When you make Asterisk, the build process will also automatically build pjproject and Asterisk will be statically linked to it. Once a particular version of pjproject is configured and built, it won't be configured or built again unless you run a 'make distclean'. To facilitate testing, when 'make install' is run, the pjsua and pjsystest utilities and the pjproject python bindings will be installed in ASTDATADIR/third-party/pjproject. The default behavior remains building with the shared pjproject installation, if any. Building: All you have to do is include the --with-pjproject-bundled option on the ./configure command line (and remove any existing --with-pjproject option if specified). Everything else is automatic. Behind the scenes: The top-level Makefile was modified to include 'third-party' in the list of MOD_SUBDIRS. The third-party directory was created to contain any third party packages that may be needed in the future. Its Makefile automatically iterates over any subdirectories passing on targets. The third-party/pjproject directory was created to house the pjproject source distribution. Its Makefile contains targets to download, patch configure, generate dependencies, compile libs, apps and python bindings, sanitized build.mak and generate a symbols list. When bootstrap.sh is run, it automatically includes the configure.m4 file in third-party/pjproject. This file has a macro to download and conifgure pjproject and get and set PJPROJECT_INCLUDE, PJPROJECT_DIR and PJPROJECT_BUNDLED. It also tests for the capabilities like PJ_TRANSACTION_GRP_LOCK by parsing preprocessor output as opposed to trying to compile. Of course, bootstrap.sh is only run once and the configure file is incldued in the patch. When configure is run with the new options, the macro in configure.m4 triggers the download, patch, conifgure and tests. No compilation is performed at this time. The downloaded tarball is cached in /tmp so it doesn't get downloaded again on a distclean. When make is run in the top-level Asterisk source directory, it will automatically descend all the subdirectories in third_party just as it does for addons, apps, etc. The top-level Makefile makes sure that the 'third-party' is built before 'main' so that dependencies from the other directories are built first. When main does build, a new shared library (libasteriskpj) is created that links statically to the pjproject .a files and exports all their symbols. The asterisk binary links to that, just as it does with libasteriskssl. When Asterisk is installed, the pjsua and pjsystest apps, and the pjproject python bindings are installed in ASTDATADIR/third-party/pjproject. This will facilitate testing, including running the testsuite which will be updated to check that directory for the pjsua module ahead of the system python library. Modules should continue to depend on pjproject if they use pjproject APIs directly. They should not care about the implementation. No changes to any res_pjsip modules were made. Change-Id: Ia7a60c28c2e9ba9537c5570f933c1ebcb20a3103	11 years ago

37 Commits (development/16/python3)