356 Commits (19.5)

Author	SHA1	Message	Date
Naveen Albert	f88cc626af	res_pjsip_outbound_registration: Make max random delay configurable. ... Currently, PJSIP will randomly wait up to 10 seconds for each outbound registration's initial attempt. The reason for this is to avoid having all outbound registrations attempt to register simultaneously. This can create limitations with the test suite where we need to be able to receive inbound calls potentially within 10 seconds of starting up. For instance, we might register to another server and then try to receive a call through the registration, but if the registration hasn't happened yet, this will fail, and hence this inconsistent behavior can cause tests to fail. Ultimately, this requires a smaller random value because there may be no good reason to wait for up to 10 seconds in these circumstances. To address this, a new config option is introduced which makes this maximum delay configurable. This allows, for instance, this to be set to a very small value in test systems to ensure that registrations happen immediately without an unnecessary delay, and can be used more generally to control how "tight" the initial outbound registrations are. ASTERISK-29965 #close Change-Id: Iab989a8e94323e645f3a21cbb6082287c7b2f3fd	4 years ago
Michael Cargile	72c8c263e8	apps/confbridge: Added hear_own_join_sound option to control who hears sound_join ... Added the hear_own_join_sound option to the confbridge user profile to control who hears the sound_join audio file. When set to 'yes' the user entering the conference and the participants already in the conference will hear the sound_join audio file. When set to 'no' the user entering the conference will not hear the sound_join audio file, but the participants already in the conference will hear the sound_join audio file. ASTERISK-29931 Added by Michael Cargile Change-Id: I856bd66dc0dfa057323860a6418c1371d249abd2	4 years ago
Naveen Albert	aece339a22	chan_dahdi: Don't append cadences on dahdi restart. ... Currently, if any custom ring cadences are specified, they are appended to the array of cadences from wherever we left off last time. This works properly the first time, but on subsequent dahdi restarts, it means that the existing cadences are left alone and (most likely) the same cadences are then re-added afterwards. In short order, the cadence array gets maxed out and the user begins seeing warnings that the array is full and no more cadences may be added. This buggy behavior persists until Asterisk is completely restarted; however, if and when dahdi restart is run again, then the same problem is reintroduced. This fixes this behavior so that cadence parsing is more idempotent, that is so running dahdi restart multiple times starts adding cadences from the beginning, rather than from wherever the last cadence was added. As before, it is still not possible to revert to the default cadences by simply removing all cadences in this manner, nor is it possible to delete existing cadences. However, this does make it possible to update existing cadences, which was not possible before, and also ensures that the cadences remain unchanged if the config remains unchanged. ASTERISK-29990 #close Change-Id: Ie32ea3e8a243b766756b1afce684d4a31ee7421d	4 years ago
Naveen Albert	a3e7b2d010	samples: Remove obsolete sample configs. ... Removes a couple sample config files for modules which have since been removed from Asterisk. ASTERISK-30008 #close Change-Id: I6be89cafc6c575d98a5315e4912b61a833aacf52	4 years ago
Mark Petersen	9ffc2f711c	chan_pjsip: add allow_sending_180_after_183 option ... added new global config option "allow_sending_180_after_183" that if enabled will preserve 180 after a 183 ASTERISK-29842 Change-Id: I8a53f8c35595b6d16d8e86e241b5f110d92f3d18	4 years ago
Kevin Harwell	d1bfbb65eb	res_aeap & res_speech_aeap: Add Asterisk External Application Protocol ... Add framework to connect to, and read and write protocol based messages from and to an external application using an Asterisk External Application Protocol (AEAP). This has been divided into several abstractions: 1. transport - base communication layer (currently websocket only) 2. message - AEAP description and data (currently JSON only) 3. transaction - links/binds requests and responses 4. aeap - transport, message, and transaction handler/manager This patch also adds an AEAP implementation for speech to text. Existing speech API callbacks for speech to text have been completed making it possible for Asterisk to connect to a configured external translator service and provide audio for STT. Results can also be received from the external translator, and made available as speech results in Asterisk. Unit tests have also been created that test the AEAP framework, and also the speech to text implementation. ASTERISK-29726 #close Change-Id: Iaa4b259f84aa63501e5fd2a6fb107f900b4d4ed2	4 years ago
Joshua C. Colp	8584ad425a	res_pjsip: Always set async_operations to 1. ... The async_operations setting on a transport configures how many simultaneous incoming packets the transport can handle when multiple threads are polling and waiting on the transport. As we only use a single thread this was needlessly creating incoming packets when set to a non-default value, wasting memory. ASTERISK-30006 Change-Id: I1915973ef352862dc2852a6ba4cfce2ed536e68f	4 years ago
Ben Ford	aba30b11a6	AST-2022-002 - res_stir_shaken/curl: Add ACL checks for Identity header. ... Adds a new configuration option, stir_shaken_profile, in pjsip.conf that can be specified on a per endpoint basis. This option will reference a stir_shaken_profile that can be configured in stir_shaken.conf. The type of this option must be 'profile'. The stir_shaken option can be specified on this object with the same values as before (attest, verify, on), but it cannot be off since having the profile itself implies wanting STIR/SHAKEN support. You can also specify an ACL from acl.conf (along with permit and deny lines in the object itself) that will be used to limit what interfaces Asterisk will attempt to retrieve information from when reading the Identity header. ASTERISK-29476 Change-Id: I87fa61f78a9ea0cd42530691a30da3c781842406	4 years ago
Joshua C. Colp	1e3ffda3db	func_odbc: Add SQL_ESC_BACKSLASHES dialplan function. ... Some databases depending on their configuration using backslashes for escaping. When combined with the use of ' this can result in a broken func_odbc query. This change adds a SQL_ESC_BACKSLASHES dialplan function which can be used to escape the backslashes. This is done as a dialplan function instead of being always done as some databases do not require this, and always doing it would result in incorrect data being put into the database. ASTERISK-29838 Change-Id: I152bf34899b96ddb09cca3e767254d8d78f0c83d	4 years ago
Naveen Albert	3707f2e144	app_queue: Add music on hold option to Queue. ... Adds the m option to the Queue application, which allows a music on hold class to be specified at runtime which will override the class configured in queues.conf. This option functions like the m option to Dial. ASTERISK-29876 #close Change-Id: Ie25a48569cf8755c305c9438b1ed292c3adcf8d7	4 years ago
Naveen Albert	96e0b79938	build: Remove obsolete leftover build references. ... Removes some leftover build and config references to modules that have since been removed from Asterisk. ASTERISK-29935 #close Change-Id: Iaefc73a23f4b2de3c6c14d928050135b6d0ef6af	4 years ago
Naveen Albert	8a94702386	ami: Allow events to be globally disabled. ... The disabledevents setting has been added to the general section in manager.conf, which allows users to specify events that should be globally disabled and not sent to any AMI listeners. This allows for processing of these AMI events to end sooner and, for frequent AMI events such as Newexten which users may not have any need for, allows them to not be processed. Additionally, it also cleans up core debug as previously when debug was 3 or higher, the debug was constantly spammed by "Analyzing AMI event" messages along with a complete dump of the event contents (often for Newexten). ASTERISK-29853 #close Change-Id: Id42b9a3722a1f460d745cad1ebc47c537fd4f205	5 years ago
Naveen Albert	e16fce2251	configs, LICENSE: remove pbx.digium.com. ... pbx.digium.com no longer accepts IAX2 calls and there are no plans for it to come back. Accordingly, nonworking IAX2 URIs are removed from both the LICENSE file and the sample config. ASTERISK-29923 #close Change-Id: I257c54d4d812ed6b4bd4cbec2cd7ebe2b87b5bad	5 years ago
Alexei Gradinari	e85ee05e9d	res_pjsip_pubsub: provide a display name for RLS subscriptions ... Whereas BLFs allow to show a display name for each RLS entry, the asterisk provides only the extension now. This is not end user friendly. This commit adds a new resource_list option, resource_display_name, to indicate whether display name of resource or the resource name being provided for RLS entries. If this option is enabled, the Display Name will be provided. This option is disabled by default to remain the previous behavior. If the 'event' set to 'presence' or 'dialog' the non-empty HINT name will be set as the Display Name. The 'message-summary' is not supported yet. ASTERISK-29891 #close Change-Id: Ic5306bd5a7c73d03f5477fe235e9b0f41c69c681	5 years ago
Mark Petersen	97ac3c1385	res_prometheus.c: missing module dependency ... added res_pjsip_outbound_registration to .requires in AST_MODULE_INFO which fixes issue with module crashes on load "FRACK!, Failed assertion" ASTERISK-29871 Change-Id: Ia0f49d048427a40e1b763296b834a52a03610096	5 years ago
Sean Bright	dfbb547f6a	res_pjsip.c: Correct minor typos in 'realm' documentation. ... Change-Id: I886936b808def5540d40071321e72f6bfa19063a	5 years ago
Naveen Albert	1a8d320a29	cdr: allow disabling CDR by default on new channels ... Adds a new option, defaultenabled, to the CDR core to control whether or not CDR is enabled on a newly created channel. This allows CDR to be disabled by default on new channels and require the user to explicitly enable CDR if desired. Existing behavior remains unchanged. ASTERISK-29808 #close Change-Id: Ibb78c11974bda229bbb7004b64761980e0b2c6d1	5 years ago
Naveen Albert	8b6fca363e	say.conf: fix 12pm noon logic ... Fixes 12pm noon incorrectly returning 0/a.m. Also fixes a misspelling typo in the config. ASTERISK-29695 #close Change-Id: Ie40f9618636eb4c483b449bd707a5dcffca5c406	5 years ago
Naveen Albert	4794582c92	ami: Add AMI event for Wink ... Adds an AMI event for a wink frame. ASTERISK-29830 #close Change-Id: I83e426de5e37baed79a4dbcc91e9e8d030ef1b56	5 years ago
Naveen Albert	bf3043ac14	configs: Updates to sample configs ... Includes some minor updates to extensions.conf and iax.conf. In particular, the demonstration of macros in extensions.conf is removed, as Macro is deprecated and will be removed soon. These examples have been replaced with examples demonstrating the usage of Gosub instead. The older exten => ...,n syntax is also mostly replaced with the same keyword to demonstrate the newer, more concise way of defining extensions. IAXTEL no longer exists, so this example is replaced with something more generic. Some documentation is also added to extensions.conf and iax.conf to clarify some of the new expanded encryption capabilities with IAX2. ASTERISK-29758 #close Change-Id: I04fba9671aa1ee9ba1bd5027061f80bbe38e7b46	5 years ago
Josh Soref	acf74178b1	configs: Spelling fixes ... Correct typos of the following word families: password excludes undesirable checksums through screening interpreting database causes initiation member busydetect defined severely throughput recognized counter require indefinitely accounts ASTERISK-29714 Change-Id: Ie8f2a7b274a162dd627ee6a2165f5e8a3876527e	5 years ago
George Joseph	9ff0c31335	ast_coredumper: Refactor to better find things ... The search for a running asterisk when --running is used has been greatly simplified and in the event it doesn't work, you can now specify a pid to use on the command line with --pid. The search for asterisk modules when --tarball-coredumps is used has been enhanced to have a better chance of finding them and in the event it doesn't work, you can now specify --libdir on the command line to indicate the library directory where they were installed. The DATEFORMAT variable was renamed to DATEOPTS and is now passed to the 'date' utility rather than running DATEFORMAT as a command. The coredump and output files are now renamed with DATEOPTS. This can be disabled by specifying --no-rename. Several confusing and conflicting options were removed: --append-coredumps --conffile --no-default-search --tarball-uniqueid The script was re-structured to make it easier for follow. Change-Id: I674be64bdde3ef310b6a551d4911c3b600ffee59	5 years ago
Matthew Kern	9d04535bbd	res_pjsip_t38: bind UDPTL sessions like RTP ... In res_pjsip_sdp_rtp, the bind_rtp_to_media_address option and the fallback use of the transport's bind address solve problems sending media on systems that cannot send ipv4 packets on ipv6 sockets, and certain other situations. This change extends both of these behaviors to UDPTL sessions as well in res_pjsip_t38, to fix fax-specific problems on these systems, introducing a new option endpoint/t38_bind_udptl_to_media_address. ASTERISK-29402 Change-Id: I87220c0e9cdd2fe9d156846cb906debe08c63557	5 years ago
Joseph Nadiv	6a04c43035	res_pjsip_registrar: Remove unavailable contacts if exceeds max_contacts ... The behavior of max_contacts and remove_existing are connected. If remove_existing is enabled, the soonest expiring contacts are removed. This may occur when there is an unavailable contact. Similarly, when remove_existing is not enabled, registrations from good endpoints are rejected in favor of retaining unavailable contacts. This commit adds a new AOR option remove_unavailable, and the effect of this setting will depend on remove_existing. If remove_existing is set to no, we will still remove unavailable contacts when they exceed max_contacts, if there are any. If remove_existing is set to yes, we will prioritize the removal of unavailable contacts before those that are expiring soonest. ASTERISK-29525 Change-Id: Ia2711b08f2b4d1177411b1be23e970d7fdff5784	5 years ago
Naveen Albert	eb874f92db	logger: Add custom logging capabilities ... Adds the ability for users to log to custom log levels by providing custom log level names in logger.conf. Also adds a logger show levels CLI command. ASTERISK-29529 Change-Id: If082703cf81a436ae5a565c75225fa8c0554b702	5 years ago
Sebastien Duthil	18189ff594	res_rtp_asterisk: Automatically refresh stunaddr from DNS ... This allows the STUN server to change its IP address without having to reload the res_rtp_asterisk module. The refresh of the name resolution occurs first when the module is loaded, then recurringly, slightly after the previous DNS answer TTL expires. ASTERISK-29508 #close Change-Id: I7955a046293f913ba121bbd82153b04439e3465f	5 years ago
Sarah Autumn	db4a3b117d	sig_analog: Changes to improve electromechanical signalling compatibility ... This changeset is intended to address compatibility issues encountered when interfacing Asterisk to electromechanical telephone switches that implement ANI-B, ANI-C, or ANI-D. In particular the behaviours that this impacts include: - FGC-CAMA did not work at all when using MF signaling. Modified the switch case block to send calls to the correct part of the signaling-handling state machine. - For FGC-CAMA operation, the delay between called number ST and second wink for ANI spill has been made configurable; previously all calls were made to wait for one full second. - After the ANI spill, previous behavior was to require a 'ST' tone to advance the call. This has been changed to allow 'STP' 'ST2P' or 'ST3P' as well, for compatibility with ANI-D. - Store ANI2 (ANI INFO) digits in the CALLERID(ANI2) channel variable. - For calls with an ANI failure, No. 1 Crossbar switches will send forward a single-digit failure code, with no calling number digits and no ST pulse to terminate the spill. I've made the ANI timeout configurable so to reduce dead air time on calls with ANI fail. - ANI info digits configurable. Modern digital switches will send 2 digits, but ANI-B sends only a single info digit. This caused the ANI reported by Asterisk to be misaligned. - Changed a confusing log message to be more informative. ASTERISK-29518 Change-Id: Ib7e27d987aee4ed9bc3663c57ef413e21b404256	5 years ago
George Joseph	a662d75556	res_pjproject: Allow mapping to Asterisk TRACE level ... Allow mapping pjproject log messages to the Asterisk TRACE log level. The defaults were also changes to log pjproject levels 3,4 to DEBUG and 5,6 to TRACE. Previously 3,4,5,6 all went to DEBUG. ASTERISK-29582 Change-Id: I859a37a8dec263ed68099709cfbd3e665324c72d	5 years ago
Joshua C. Colp	368aa47962	res_config_sqlite: Remove deprecated module. ... ASTERISK-29598 Change-Id: I8ef17023f55bf01f2e309b06f4778a8ca7252c91	5 years ago
Joshua C. Colp	9d5f55a5f3	chan_vpb: Remove deprecated module. ... ASTERISK-29597 Change-Id: I19bb39eed0257ddfef453eb2df5646d073d50fe1	5 years ago
Joshua C. Colp	72a2140a50	chan_misdn: Remove deprecated module. ... ASTERISK-29596 Change-Id: Ibae9490c1b35cadbf7028d24610f745277c8535e	5 years ago
Joshua C. Colp	7361a52820	chan_phone: Remove deprecated module. ... ASTERISK-29594 Change-Id: I79a9961cb5062fadbccb0ea93f087bdd32685316	5 years ago
Joshua C. Colp	d0ad32c7cf	chan_oss: Remove deprecated module. ... ASTERISK-29593 Change-Id: Ib53a42ad974c63871344b95078c61c188e43da99	5 years ago
Joshua C. Colp	e4b6f24a1d	cdr_syslog: Remove deprecated module. ... ASTERISK-29592 Change-Id: Ic8eb6a2100ad5bc3b48338a6d0a6cfa70ecbc50f	5 years ago
Joshua C. Colp	3e07b1ff62	cdr_mysql: Remove deprecated module. ... ASTERISK-29584 Change-Id: I4bd3695d089121f810d692a82361d39d2f97ae39	5 years ago
Rijnhard Hessel	f13eef719c	res_statsd: handle non-standard meter type safely ... Meter types are not well supported, lacking support in telegraf, datadog and the official statsd servers. We deprecate meters and provide a compliant fallback for any existing usages. A flag has been introduced to allow meters to fallback to counters. ASTERISK-29513 Change-Id: I5fcb385983a1b88f03696ff30a26b55c546a1dd7	5 years ago
Naveen Albert	5f8cabc232	app_confbridge: New option to prevent answer supervision ... A new user option, answer_channel, adds the capability to prevent answering the channel if it hasn't already been answered yet. ASTERISK-29440 Change-Id: I26642729d0345f178c7b8045506605c8402de54b	5 years ago
Jeremy Lainé	d162789c4d	res_rtp_asterisk: make it possible to remove SOFTWARE attribute ... By default Asterisk reports the PJSIP version in a SOFTWARE attribute of every STUN packet it sends. This may not be desired in a production environment, and RFC5389 recommends making the use of the SOFTWARE attribute a configurable option: https://datatracker.ietf.org/doc/html/rfc5389#section-16.1.2 This patch adds a `stun_software_attribute` yes/no option to make it possible to omit the SOFTWARE attribute from STUN packets. ASTERISK-29434 Change-Id: Id3f2b1dd9584536ebb3a1d7e8395fd8b3e46860b	5 years ago
George Joseph	9cc1d6fc22	res_pjsip_outbound_authenticator_digest: Be tolerant of RFC8760 UASs ... RFC7616 and RFC8760 allow more than one WWW-Authenticate or Proxy-Authenticate header per realm, each with different digest algorithms (including new ones like SHA-256 and SHA-512-256). Thankfully however a UAS can NOT send back multiple Authenticate headers for the same realm with the same digest algorithm. The UAS is also supposed to send the headers in order of preference with the first one being the most preferred. We're supposed to send an Authorization header for the first one we encounter for a realm that we can support. The UAS can also send multiple realms, especially when it's a proxy that has forked the request in which case the proxy will aggregate all of the Authenticate headers and then send them all back to the UAC. It doesn't stop there though... Each realm can require a different username from the others. There's also nothing preventing each digest algorithm from having a unique password although I'm not sure if that adds any benefit. So now... For each Authenticate header we encounter, we have to determine if we support the digest algorithm and, if not, just skip the header. We then have to find an auth object that matches the realm AND the digest algorithm or find a wildcard object that matches the digest algorithm. If we find one, we add it to the results vector and read the next Authenticate header. If the next header is for the same realm AND we already added an auth object for that realm, we skip the header. Otherwise we repeat the process for the next header. In the end, we'll have accumulated a list of credentials we can pass to pjproject that it can use to add Authentication headers to a request. NOTE: Neither we nor pjproject can currently handle digest algorithms other than MD5. We don't even have a place for it in the ast_sip_auth object. For this reason, we just skip processing any Authenticate header that's not MD5. When we support the others, we'll move the check into the loop that searches the objects. Changes: * Added a new API ast_sip_retrieve_auths_vector() that takes in a vector of auth ids (usually supplied on a call to ast_sip_create_request_with_auth()) and populates another vector with the actual objects. * Refactored res_pjsip_outbound_authenticator_digest to handle multiple Authenticate headers and set the stage for handling additional digest algorithms. * Added a pjproject patch that allows them to ignore digest algorithms they don't support. This patch has already been merged upstream. * Updated documentation for auth objects in the XML and in pjsip.conf.sample. * Although res_pjsip_authenticator_digest isn't affected by this change, some debugging and a testsuite AMI event was added to facilitate testing. Discovered during OpenSIPit 2021. ASTERISK-29397 Change-Id: I3aef5ce4fe1d27e48d61268520f284d15d650281	5 years ago
Naveen Albert	04454fc238	AMI: Add AMI event to expose hook flash events ... Although Asterisk can receive and propogate flash events, it currently provides no mechanism for doing anything with them itself. This AMI event allows flash events to be processed by Asterisk. Additionally, AST_CONTROL_FLASH is included in a switch statement in channel.c to avoid throwing a warning when we shouldn't. ASTERISK-29380 Change-Id: Ie17ffe65086e0282c88542e38eed6a461ec79e81	5 years ago
Ben Ford	0564d12280	STIR/SHAKEN: Switch to base64 URL encoding. ... STIR/SHAKEN encodes using base64 URL format. Currently, we just use base64. New functions have been added that convert to and from base64 encoding. The origid field should also be an UUID. This means there's no reason to have it as an option in stir_shaken.conf, as we can simply generate one when creating the Identity header. https://wiki.asterisk.org/wiki/display/AST/OpenSIPit+2021 Change-Id: Icf094a2a54e87db91d6b12244c9f5ba4fc2e0b8c	5 years ago
Ben Ford	259ecfa289	STIR/SHAKEN: Fix certificate type and storage. ... During OpenSIPit, we found out that the public certificates must be of type X.509. When reading in public keys, we use the corresponding X.509 functions now. We also discovered that we needed a better naming scheme for the certificates since certificates with the same name would cause issues (overwriting certs, etc.). Now when we download a public certificate, we get the serial number from it and use that as the name of the cached certificate. The configuration option public_key_url in stir_shaken.conf has also been renamed to public_cert_url, which better describes what the option is for. https://wiki.asterisk.org/wiki/display/AST/OpenSIPit+2021 Change-Id: Ia00b20835f5f976e3603797f2f2fb19672d8114d	5 years ago
Sean Bright	4a843e00ef	res_pjsip.c: OPTIONS processing can now optionally skip authentication ... ASTERISK-27477 #close Change-Id: I68f6715bba92a525149e35d142a49377a34a1193	5 years ago
George Joseph	512d38868c	res_pjsip: Update documentation for the auth object ... Change-Id: I2f76867ce02ec611964925159be099de83346e38	5 years ago
Ben Ford	45a1977de4	res_aeap: Add basic config skeleton and CLI commands. ... Added support for a basic AEAP configuration read from aeap.conf. Also added 2 CLI commands for showing individual configurations as well as all of them: aeap show server <id> and aeap show servers. Only one configuration option is required at the moment, and that one is server_url. It must be a websocket URL. The other option, codecs, is optional and will be used over the codecs specified on the endpoint if provided. https://wiki.asterisk.org/wiki/pages/viewpage.action?pageId=45482453 Change-Id: I567ac5148c92b98d29d2ad83421b416b75ffdaa3	5 years ago
Sean Bright	c2dbfb9a8e	modules.conf: Fix more differing usages of assignment operators. ... I missed the changes in 18 and master in the previous review. ASTERISK-24434 #close Change-Id: Ieb132b2a998ce96daa9c9acf26535a974b895876	5 years ago
Ben Ford	25758670b8	logger.conf.sample: Add more debug documentation. ... Change-Id: Iff0e713f2120d8dce8e1e26924b99ed17f9d9dff	5 years ago
Ben Ford	55c53de022	logging: Add .log to samples and update asterisk.logrotate. ... Added .log extension to the sample logs in logger.conf.sample so that they will be able to be opened in the browser when attached to JIRA tickets. Because of this, asterisk.logrotate has also been updated to look for .log extensions instead of no extension for log files such as full and messages. Change-Id: I5de743c03f08047d6c6cc80cac5019ae0c4c200f	5 years ago
Sean Bright	aac442eecd	app_queue.c: Remove dead 'updatecdr' code. ... Also removed the sample documentation, and some oddly-placed documentation about the timeout argument to the Queue() application itself. There is a large section on the timeout behavior below. ASTERISK-26614 #close Change-Id: I8f84e8304b50305b7c4cba2d9787a5d77c3a6217	5 years ago
Sean Bright	cad843fe07	queues.conf.sample: Correct 'context' documentation. ... ASTERISK-24631 #close Change-Id: I8bf8776906a72ee02f24de6a85345940b9ff6b6f	5 years ago