2015 Commits (17.9)

Author	SHA1	Message	Date
Alexander Traud	5cc639a934	rtp: Enable srtp replay protection ... Add option "srtpreplayprotection" rtp.conf to enable srtp replay protection. ASTERISK-29260 Reported by: Alexander Traud Change-Id: I5cd346e3c6b6812039d1901aa4b7be688173b458	6 years ago
Andrew Siplas	aa5577fecd	logger.conf.sample: add missing comment mark ... Add missing comment mark from stock configuration. ASTERISK-29123 #close Change-Id: I4f94eb4544166bca8af4c17fd11edee3c6980620	6 years ago
George Joseph	0bc136c3ab	app_confbridge/bridge_softmix: Add ability to force estimated bitrate ... app_confbridge now has the ability to set the estimated bitrate on an SFU bridge. To use it, set a bridge profile's remb_behavior to "force" and set remb_estimated_bitrate to a rate in bits per second. The remb_estimated_bitrate parameter is ignored if remb_behavior is something other than "force". Change-Id: Idce6464ff014a37ea3b82944452e56cc4d75ab0a	6 years ago
Sean Bright	a68e33d91b	res_musiconhold: Clarify that playlist mode only supports HTTP(S) URLs ... Change-Id: I41e77a04e4a523f4ed61a7a20b738ffd42be441e	6 years ago
Alexander Traud	106cfc61f7	samples: Fix keep_alive_interval default in pjsip.conf. ... Since ASTERISK_27978 the default is not off but 90 seconds. That change happened because ASTERISK_27347 disabled the keep-alives in the bundled PJProject and Asterisk should behave the same as before. Change-Id: Ie63dc558ade6a5a2b969c30a4bd492d63730dc46	6 years ago
George Joseph	ddaf9751e9	logger.c: Added a new log formatter called "plain" ... Added a new log formatter called "plain" that always prints file, function and line number if available (even for verbose messages) and never prints color control characters. It also doesn't apply any special formatting for verbose messages. Most suitable for file output but can be used for other channels as well. You use it in logger.conf like so: debug => [plain]debug console => [plain]error,warning,debug,notice,pjsip_history messages => [plain]warning,error,verbose Change-Id: I4fdfe4089f66ce2f9cb29f3005522090dbb5243d	6 years ago
sungtae kim	7c12303c4c	res_pjsip.c: Added disable_rport option for pjsip.conf ... Currently when the pjsip making an outgoing request, it keep adding the rport parameter in a request message as a default. This causes unexpected rport handle at the other end. Added option for disable this behaviour in the pjsip.conf. This is a system option, but working as a gloabl option. ASTERISK-28959 Change-Id: I9596675e52a742774738b5aad5d1fec32f477abc	6 years ago
George Joseph	6b899661ef	Scope Tracing: A new facility for tracing scope enter/exit ... What's wrong with ast_debug? ast_debug is fine for general purpose debug output but it's not really geared for scope tracing since it doesn't present its output in a way that makes capturing and analyzing flow through Asterisk easy. How is scope tracing better? Scope tracing uses the same "cleanup" attribute that RAII_VAR uses to print messages to a separate "trace" log level. Even better, the messages are indented and unindented based on a thread-local call depth counter. When output to a separate log file, the output is uncluttered and easy to follow. Here's an example of the output. The leading timestamps and thread ids are removed and the output cut off at 68 columns for commit message restrictions but you get the idea. --> res_pjsip_session.c:3680 handle_incoming PJSIP/1173-00000001 --> res_pjsip_session.c:3661 handle_incoming_response PJSIP/1173 --> res_pjsip_session.c:3669 handle_incoming_response PJSIP/ --> chan_pjsip.c:3265 chan_pjsip_incoming_response_after --> chan_pjsip.c:3194 chan_pjsip_incoming_response P chan_pjsip.c:3245 chan_pjsip_incoming_respon <-- chan_pjsip.c:3194 chan_pjsip_incoming_response P <-- chan_pjsip.c:3265 chan_pjsip_incoming_response_after <-- res_pjsip_session.c:3669 handle_incoming_response PJSIP/ <-- res_pjsip_session.c:3661 handle_incoming_response PJSIP/1173 <-- res_pjsip_session.c:3680 handle_incoming PJSIP/1173-00000001 The messages with the "-->" or "<--" were produced by including the following at the top of each function: SCOPE_TRACE(1, "%s\n", ast_sip_session_get_name(session)); Scope isn't limited to functions any more than RAII_VAR is. You can also see entry and exit from "if", "for", "while", etc blocks. There is also an ast_trace() macro that doesn't track entry or exit but simply outputs a message to the trace log using the current indent level. The deepest message in the sample (chan_pjsip.c:3245) was used to indicate which "case" in a "select" was executed. How do you use it? More documentation is available in logger.h but here's an overview: * Configure with --enable-dev-mode. Like debug, scope tracing is #ifdef'd out if devmode isn't enabled. * Add a SCOPE_TRACE() call to the top of your function. * Set a logger channel in logger.conf to output the "trace" level. * Use the CLI (or cli.conf) to set a trace level similar to setting debug level... CLI> core set trace 2 res_pjsip.so Summary Of Changes: * Added LOG_TRACE logger level. Actually it occupies the slot formerly occupied by the now defunct "event" level. * Added core asterisk option "trace" similar to debug. Includes ability to specify global trace level in asterisk.conf and CLI commands to turn on/off and set levels. Levels can be set globally (probably not a good idea), or by module/source file. * Updated sample asterisk.conf and logger.conf. Tracing is disabled by default in both. * Added __ast_trace() to logger.c which keeps track of the indent level using TLS. It's #ifdef'd out if devmode isn't enabled. * Added ast_trace() and SCOPE_TRACE() macros to logger.h. These are all #ifdef'd out if devmode isn't enabled. Why not use gcc's -finstrument-functions capability? gcc's facility doesn't allow access to local data and doesn't operate on non-function scopes. Known Issues: The only know issue is that we currently don't know the line number where the scope exited. It's reported as the same place the scope was entered. There's probably a way to get around it but it might involve looking at the stack and doing an 'addr2line' to get the line number. Kind of like ast_backtrace() does. Not sure if it's worth it. Change-Id: Ic5ebb859883f9c10a08c5630802de33500cad027	6 years ago
Joshua C. Colp	21f0759b2c	confbridge: Add support for disabling text messaging. ... When in a conference bridge it may be necessary to have text messages disabled for specific participants or for all. This change adds a configuration option, "text_messaging", which can be used to enable or disable this on the user profile. By default existing behavior is preserved as it defaults to "yes". ASTERISK-28841 Change-Id: I30b5d9ae6f4803881d1ed9300590d405e392bc13	6 years ago
Jaco Kroon	c7c52b8e7a	res_rtp_asterisk: implement ACL mechanism for ICE and STUN addresses. ... A pure blacklist is not good enough, we need a whitelist mechanism as well, and the simplest way to do that is to re-use existing ACL infrastructure. This makes it simpler to blacklist say an entire block (/24) except a smaller block (eg, a /29 or even a /32). Normally you'd need to recursively split the block, so if you want to blacklist a /24 except for a /29 you'd end up with a blacklit for a /25, /26, /27 and /28. I feel that having an ACL instead of a blacklist only is clearer. Change-Id: Id57a8df51fcfd3bd85ea67c489c85c6c3ecd7b30 Signed-off-by: Jaco Kroon <jaco@uls.co.za>	7 years ago
Sean Bright	83981ad783	func_odbc.conf.sample: Clarify sample documentation ... ASTERISK-20325 #close Change-Id: I06cb9b467b0fd06c8af2a5aee049f872c09cc4b6	7 years ago
Jared Smith	ff48a6cd56	indications.conf.sample: Add indication tones for Indonesia ... These tones come from http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf ASTERISK-23407 Change-Id: I48e2285f1e5bb29b3335f762006f66c423d0fcb8	7 years ago
Walter Doekes	d19dec53b5	chan_sip: Clarify in sample docs how directmediapermit/-acl should be used ... It said "restrict [...] which peers should be able to pass [audio] to each other". However, these settings are not global (for which you would expect signaling IPs to be checked). These settings are available per peer only, and the IPs being checked, are the RTP IPs. Change-Id: I2a6c6cd7c2f5f30d1df4844e3e0308a077021660	7 years ago
George Joseph	54cd865946	message.c: Add option to suppress the Message channel AMI and ARI events ... In order to reduce the amount of AMI and ARI events generated, the global "Message/ast_msg_queue" channel can be set to suppress it's normal channel housekeeping events such as "Newexten", "VarSet", etc. This can greatly reduce load on the manager and ARI applications when the Digium Phone Module for Asterisk is in use. To enable, set "hide_messaging_ami_events" in asterisk.conf to "yes" In Asterisk versions <18, the default is "no" preserving existing behavior. Beginning with Asterisk 18, the option will default to "yes". NOTE: This change does not affect UserEvents or the ARI TextMessageReceived events. * Added the "hide_messaging_ami_events" option to asterisk.conf. * Changed message.c to set the AST_CHAN_TP_INTERNAL property on the "Message/ast_msg_queue" channel if the option is set in asterisk.conf. This suppresses the reporting of the events. Change-Id: Ia2e3516d43f4e0df994fc6598565d6bba2d7018b	7 years ago
Sean Bright	1e79bf44fc	http: Add ability to disable /httpstatus URI ... Add a new configuration option 'enable_status' which allows the /httpstatus URI handler to be administratively disabled. We also no longer unconditionally register the /static and /httpstatus URI handlers, but instead do it based upon configuration. Behavior change: If enable_static was turned off, the URI handler was still installed but returned a 403 when it was accessed. Because we now register/unregister the URI handlers as appropriate, if the /static URI is disabled we will return a 404 instead. Additionally: * Change 'enablestatic' to 'enable_static' but keep the former for backwards compatibility. * Improve some internal variable names ASTERISK-28710 #close Change-Id: I647510f796473793b1d3ce1beb32659813be69e1	7 years ago
Sean Bright	d33cd39260	func_odbc.conf.sample: Add example lookup ... Change-Id: Ia05aab1f579597963d2ea23920d2210cfcb97c84	7 years ago
Sean Bright	eac6eb663d	res_pjsip_endpoint_identifier_ip.c: Add port matching support ... Adds source port matching support when IP matching is used: [example] type = identify match = 1.2.3.4:5060/32, 1.2.3.4:6000/32, asterisk.org:4444 If the IP matches but the source port does not, we reject and search for alternatives. SRV lookups are still performed if enabled (srv_lookups = yes), unless the configured FQDN includes a port number in which case just a host lookup is performed. ASTERISK-28639 #close Reported by: Mitch Claborn Change-Id: I256d5bd5d478b95f526e2f80ace31b690eebba92	7 years ago
Joshua C. Colp	41fdcf7a65	confbridge: Add support for specifying maximum sample rate. ... ConfBridge has the ability to move between different sample rates for mixing the conference bridge. Up until now there has only been the ability to set the conference bridge to mix at a specific sample rate, or to let it move between sample rates as necessary. This change adds the ability to configure a conference bridge with a maximum sample rate so it can move between sample rates but only up to the configured maximum. ASTERISK-28658 Change-Id: Idff80896ccfb8a58a816e4ce9ac4ebde785963ee	7 years ago
George Joseph	0257a039e4	Merge "basic-pbx: Bring forward queue configuration from 13" into 17	7 years ago
Jonathan Rose	d223419bcd	basic-pbx: Bring forward queue configuration from 13 ... Original commit: cfbf5fbe91 Change-Id: I34a841d73c429ca8d944481f8dccb756ee231c9c	7 years ago
Sean Bright	7550a82fe0	res_musiconhold: Add new 'playlist' mode ... Allow the list of files to be played to be provided explicitly in the music class's configuration. The primary driver for this change is to allow URLs to be used for MoH. Change-Id: I9f43b80b43880980b18b2bee26ec09429d0b92fa	7 years ago
Chris-Savinovich	6b1f6ea2c4	app_voicemail.c: Build all three variants for app_voicemail at the same time ... Changes made to apps/Makefile to optionally build all three app_voicemail variations at the same time: 1) file (default), 2) odbc, and 3) imap. This functionality was requested by users. modules.conf.sample warns the user to make sure only one voicemail is loaded at a time. Change-Id: Iba3cd8ffb4b7e8b1c64a11dd383e1eafcd3ed0e7	7 years ago
Joshua Colp	a8e5cf557d	res_rtp_asterisk: Add support for DTLS packet fragmentation. ... This change adds support for larger TLS certificates by allowing OpenSSL to fragment the DTLS packets according to the configured MTU. By default this is set to 1200. This is accomplished by implementing our own BIO method that supports MTU querying. The configured MTU is returned to OpenSSL which fragments the packet accordingly. When a packet is to be sent it is done directly out the RTP instance. ASTERISK-28018 Change-Id: If2d5032019a28ffd48f43e9e93ed71dbdbf39c06	7 years ago
Kirsty Tyerman	bcaa01b024	pbx_dundi: added IPv4/IPv6 dual bind support to DUNDi ... ASTERISK-28234 Reported-by: Kirsty Tyerman Change-Id: I5d6e6b52dbe51415046bb3953fd16f5b421bc2e1	7 years ago
Friendly Automation	522303681c	Merge "res_rtp_asterisk: Add ability to propose local address in ICE"	7 years ago
Matt Jordan	0760af71ad	res_prometheus: Add Asterisk channel metrics ... This patch adds basic Asterisk channel statistics to the res_prometheus module. This includes: * asterisk_calls_sum: A running sum of the total number of processed calls * asterisk_calls_count: The current number of calls * asterisk_channels_count: The current number of channels * asterisk_channels_state: The state of any particular channel * asterisk_channels_duration_seconds: How long a channel has existed, in seconds In all cases, enough information is provided with each channel metric to determine a unique instance of Asterisk that provided the data, as well as the name, type, unique ID, and - if present - linked ID of each channel. ASTERISK-28403 Change-Id: I0db306ec94205d4f58d1e7fbabfe04b185869f59	7 years ago
Matt Jordan	c50f29dfad	Add core Prometheus support to Asterisk ... Prometheus is the defacto monitoring tool for containerized applications. This patch adds native support to Asterisk for serving up Prometheus compatible metrics, such that a Prometheus server can scrape an Asterisk instance in the same fashion as it does other HTTP services. The core module in this patch provides an API that future work can build on top of. The API manages metrics in one of two ways: (1) Registered metrics. In this particular case, the API assumes that the metric (either allocated on the stack or on the heap) will have its value updated by the module registering it at will, and not just when Prometheus scrapes Asterisk. When a scrape does occur, the metrics are locked so that the current value can be retrieved. (2) Scrape callbacks. In this case, the API allows consumers to be called via a callback function when a Prometheus initiated scrape occurs. The consumers of the API are responsible for populating the response to Prometheus themselves, typically using stack allocated metrics that are then formatted properly into strings via this module's convenience functions. These two mechanisms balance the different ways in which information is generated within Asterisk: some information is generated in a fashion that makes it appropriate to update the relevant metrics immediately; some information is better to defer until a Prometheus server asks for it. Note that some care has been taken in how metrics are defined to minimize the impact on performance. Prometheus's metric definition and its support for nesting metrics based on labels - which are effectively key/value pairs - can make storage and managing of metrics somewhat tricky. While a naive approach, where we allow for any number of labels and perform a lot of heap allocations to manage the information, would absolutely have worked, this patch instead opts to try to place as much information in length limited arrays, stack allocations, and vectors to minimize the performance impacts of scrapes. The author of this patch has worked on enough systems that were driven to their knees by poor monitoring implementations to be a bit cautious. Additionally, this patch only adds support for gauges and counters. Additional work to add summaries, histograms, and other Prometheus metric types may add value in the future. This would be of particular interest if someone wanted to track SIP response types. Finally, this patch includes unit tests for the core APIs. ASTERISK-28403 Change-Id: I891433a272c92fd11c705a2c36d65479a415ec42	7 years ago
George Joseph	be83591f99	res_rtp_asterisk: Add ability to propose local address in ICE ... You can now add the "include_local_address" flag to an entry in rtp.conf "[ice_host_candidates]" to include both the advertized address and the local address in ICE negotiation: [ice_host_candidates] 192.168.1.1 = 1.2.3.4,include_local_address This causes both 192.168.1.1 and 1.2.3.4 to be advertized. Change-Id: Ide492cd45ce84546175ca7d557de80d9770513db	7 years ago
Joshua Colp	80dba268ea	app_confbridge: Add "all" variants of REMB behavior. ... When producing a combined REMB value the normal behavior is to have a REMB value which is unique for each sender based on all of their receivers. This can result in one sender having low bitrate while all the rest are high. This change adds "all" variants which produces a bridge level REMB value instead. All REMB reports are combined together into a single REMB value that is the same for each sender. ASTERISK-28401 Change-Id: I883e6cc26003b497c8180b346111c79a131ba88c	7 years ago
Rodrigo Ramírez Norambuena	ed615afb7e	app_queue: Set correct value by default for shared_lastcall ... There a long history here: In commit dd1e62c095 has introduce by default shared_lastcall = true by default but this now only happen is there not [general] directive in queues.conf After that, the commit 4b50e3f1ee fix the sample file. We'll need to keep the same setting if there a general or not section in configuration file since the shared_lastcall is by a long time in sample files as default value to 'no'. Change-Id: Id44faec370136df8d57902b453ad4059ed21b94c	7 years ago
Dan Cropp	cffa2a74cb	res_pjsip: Added a norefersub configuration setting ... Added a new PJSIP global setting called norefersub. Default is true to keep support working as before. res_pjsip_refer: Configures PJSIP norefersub capability accordingly. Checks the PJSIP global setting value. If it is true (default) it adds the norefersub capability to PJSIP. If it is false (disabled) it does not add the norefersub capability to PJSIP. This is useful for Cisco switches that do not follow RFC4488. ASTERISK-28375 #close Reported-by: Dan Cropp Change-Id: I0b1c28ebc905d881f4a16e752715487a688b30e9	7 years ago
Torrey Searle	4661c08549	chan_pjsip: add a flag to ignore 183 responses if no SDP present ... chan_sip will always ignore 183 responses that do not contain SDP however, chan_pjsip will currently always translate it into a 183 with SDP. This new flag allows chan_pjsip to have the same behavior as chan_sip. ASTERISK-28322 #close Change-Id: If81cfaa17c11b6ac703e3d71696f259d86c6be4a	8 years ago
Sean Bright	7b02a9617c	samples: Fix comment typo in pjsip.conf.sample ... Change-Id: I84a45c3d9fd26ca61aca99927eec83b57f1de857	8 years ago
Joshua Colp	2980622d2b	basic-pbx: Update configuration to work with current modules. ... The res_pjsip_websocket module requires the res_http_websocket module so ensure it is loaded. As well the res_pjsip_notify module needs the pjsip_notify.conf configuration file so ensure it is installed. ASTERISK-28272 Change-Id: I261659b84e7a6ac4cb49990d9badb4b2ad01bacd	8 years ago
George Joseph	c2adeb9dc2	taskprocessor: Enable subsystems and overload by subsystem ... To prevent one subsystem's taskprocessors from causing others to stall, new capabilities have been added to taskprocessors. * Any taskprocessor name that has a '/' will have the part before the '/' saved as its "subsystem". Examples: "sorcery/acl-0000006a" and "sorcery/aor-00000019" will be grouped to subsystem "sorcery". "pjsip/distributor-00000025" and "pjsip/distributor-00000026" will bn grouped to subsystem "pjsip". Taskprocessors with no '/' have an empty subsystem. * When a taskprocessor enters high-water alert status and it has a non-empty subsystem, the subsystem alert count will be incremented. * When a taskprocessor leaves high-water alert status and it has a non-empty subsystem, the subsystem alert count will be decremented. * A new api ast_taskprocessor_get_subsystem_alert() has been added that returns the number of taskprocessors in alert for the subsystem. * A new CLI command "core show taskprocessor alerted subsystems" has been added. * A new unit test was addded. REMINDER: The taskprocessor code itself doesn't take any action based on high-water alerts or overloading. It's up to taskprocessor users to check and take action themselves. Currently only the pjsip distributor does this. * A new pjsip/global option "taskprocessor_overload_trigger" has been added that allows the user to select the trigger mechanism the distributor uses to pause accepting new requests. "none": Don't pause on any overload condition. "global": Pause on ANY taskprocessor overload (the default and current behavior) "pjsip_only": Pause only on pjsip taskprocessor overloads. * The core pjsip pool was renamed from "SIP" to "pjsip" so it can be properly grouped into the "pjsip" subsystem. * stasis taskprocessor names were changed to "stasis" as the subsystem. * Sorcery core taskprocessor names were changed to "sorcery" to match the object taskprocessors. Change-Id: I8c19068bb2fc26610a9f0b8624bdf577a04fcd56	8 years ago
Joshua Colp	54a912b26d	res_odbc: Add basic query logging. ... When Asterisk is connected and used with a database the response time of the database can cause problems in Asterisk if it is long. Normally the only way to see this problem would be to retrieve a backtrace from Asterisk and examine where things are blocked, or examine the database to see if there is any indication of a problem. This change adds some basic query logging to make it easier to investigate such a problem. When logging is enabled res_odbc will now keep track of the number of queries executed, as well as the query that has taken the longest time to execute. There is also an option which will cause a WARNING message to be output if a query takes longer than a configurable amount of time to execute. This makes it easier and clearer for users that their database may be experiencing a problem that could impact Asterisk. ASTERISK-28277 Change-Id: I173cf4928b10754478a6a8c27dfa96ede0f058a6	8 years ago
Kevin Harwell	0bcaadc037	codecs.conf.sample: update codec opus docs ... The option value "sdp" for some of the settings was removed a while back, however the sample conf was not updated. This patch removes any wording with regards to the old "sdp" option value, and adjusts the defaults to what they are now. ASTERISK-28263 Change-Id: I41bfa44e9f69446bcc5c8fd92e3675c676fdc445	8 years ago
George Joseph	c6980e32ae	app_voicemail: Add Mailbox Aliases ... You can now define an "aliases" context in voicemail.conf whose entries point to actual mailboxes. These can be used anywhere the mailbox is specified. Example: [general] aliasescontext = myaliases [default] 1234 = yadayada [myaliases] 4321@devices = 1234@default Now you can use 4321@devices to refer to the 1234@default mailbox. This can be useful to provide channel drivers with constant mailbox specifications such as <extension>@devices leaving app_voicemail to control exactly which mailbox the alias points to. Now, only voicemail has to be reloaded to make changes instead of individual channel drivers which are usually more expensive to reload. Change-Id: I395b9205c91523a334fe971be0d1de4522067b04	8 years ago
Alexei Gradinari	f0546d1d87	res_pjsip: add option to enable ContactStatus event when contact is updated ... The commit I2f97ebfa79969a36a97bb7b9afd5b6268cf1a07d removed sending out the ContactStatus AMI event when a contact is updated. Thist change broke things which rely on old behavior. This patch adds a new PJSIP global configuration option 'send_contact_status_on_update_registration' to be able to preserve old ContactStatus behavior. By default new behavior, i.e. the ContactStatus event will not be sent when a device refreshes its registration. Change-Id: I706adf7584e7077eb6bde6d9799ca408bc82ce46	8 years ago
David M. Lee	b899119a5d	Removing registrar_expire from basic-pbx config ... The module has been removed, so it shouldn't be in the default config any more. Change-Id: Ie7e09f00f9c9a885574e29478250de4c2cefd9f1	8 years ago
George Joseph	4f0bf0270e	Revert "app_voicemail: Remove need to subscribe to stasis" ... This reverts commit 29115e2384. That commit closed a long standing hole which allowed subscriptions to mailboxes that weren't configured in voicemail.conf. This caused an issue with FreePBX which depdended on that behavior. The commit is being reverted until FreePBX can handle the new behavior. ASTERISK-28151 Reported by: Ronald Raikes Change-Id: I57b7b85e75d7dd97c742b5c69d718a0f61260c15	8 years ago
Joshua Colp	50ac85cb40	stasis: Segment channel snapshot to reduce creation cost. ... When a channel snapshot was created it used to be done from scratch, copying all data (many strings). This incurs a cost when doing so. This change segments the channel snapshot into different components which can be reused if unchanged from the previous snapshot creation, reducing the cost. In normal cases this results in some pointers being copied with reference count being bumped, some integers being set, and a string or two copied. The other benefit is that it is now possible to determine if a channel snapshot update is redundant and thus stop it before a message is published to stasis. The specific segments in the channel snapshot were split up based on whether they are changed together, how often they are changed, and their general grouping. In practice only 1 (or 0) of the segments actually get changed in normal operation. Invalidation is done by setting a flag on the channel when the segment source is changed, forcing creation of a new segment when the channel snapshot is created. ASTERISK-28119 Change-Id: I5d7ef3df963a88ac47bc187d73c5225c315f8423	8 years ago
George Joseph	26810197c7	Merge "pjsip: new endpoint's options to control Connected Line updates"	8 years ago
Alexei Gradinari	eee935983b	pjsip: new endpoint's options to control Connected Line updates ... This patch adds new options 'trust_connected_line' and 'send_connected_line' to the endpoint. The option 'trust_connected_line' is to control if connected line updates are accepted from this endpoint. The option 'send_connected_line' is to control if connected line updates can be sent to this endpoint. The default value is 'yes' for both options. Change-Id: I16af967815efd904597ec2f033337e4333d097cd	8 years ago
Corey Farrell	90a11c4ae7	chan_sip deprecation. ... This officially deprecates chan_sip in Asterisk 17+. A warning is printed upon startup or module load to tell users that they should consider migrating. chan_sip is still built by default but the default modules.conf skips loading it at startup. Very important to note we are not scheduling a time where chan_sip will be removed. The goal of this change is to accurately inform end users of the current state of chan_sip and encourage movement to the fully supported chan_pjsip. Change-Id: Icebd8848f63feab94ef882d36b2e99d73155af93	8 years ago
Joshua Colp	bf5bb7831f	Merge "modules.conf.sample: Update preload usage documentation."	8 years ago
Richard Mudgett	96d5e444f0	modules.conf.sample: Update preload usage documentation. ... Change-Id: Id449d4435c38148b56ac4cfd61ae4d90ac66bb90	8 years ago
Nick French	37b2e68628	res_pjsip: Implement additional SIP RFCs for Google Voice trunk compatability ... This change implements a few different generic things which were brought on by Google Voice SIP. 1. The concept of flow transports have been introduced. These are configurable transports in pjsip.conf which can be used to reference a flow of signaling to a target. These have runtime configuration that can be changed by the signaling itself (such as Service-Routes and P-Preferred-Identity). When used these guarantee an individual connection (in the case of TCP or TLS) even if multiple flow transports exist to the same target. 2. Service-Routes (RFC 3608) support has been added to the outbound registration module which when received will be stored on the flow transport and used for requests referencing it. 3. P-Associated-URI / P-Preferred-Identity (RFC 3325) support has been added to the outbound registration module. If a P-Associated-URI header is received it will be used on requests as the P-Preferred-Identity. 4. Configurable outbound extension support has been added to the outbound registration module. When set the extension will be placed in the Supported header. 5. Header parameters can now be configured on an outbound registration which will be placed in the Contact header. 6. Google specific OAuth / Bearer token authentication (draft-ietf-sipcore-sip-authn-02) has been added to the outbound registration module. All functionality changes are controlled by pjsip.conf configuration options and do not affect non-configured pjsip endpoints otherwise. ASTERISK-27971 #close Change-Id: Id214c2d1c550a41fcf564b7df8f3da7be565bd58	8 years ago
Sean Bright	90bd8371f2	samples: PARKINGSLOT -> PARKING_SPACE in parking sample config ... PARKINGSLOT was deprecated in Asterisk 12 but the sample config was not updated to reflect that. Change-Id: I3e087c19d9ee587094fa5304102d8084a79c2b3c	8 years ago
Ben Ford	b11a6643cf	res_rtp_asterisk.c: Add "seqno" strictrtp option ... When networks experience disruptions, there can be large gaps of time between receiving packets. When strictrtp is enabled, this created issues where a flood of packets could come in and be seen as an attack. Another option - seqno - has been added to the strictrtp option that ignores the time interval and goes strictly by sequence number for validity. Change-Id: I8a42b8d193673899c8fc22fe7f98ea87df89be71	8 years ago