We now check that a body exists and it has a length > 0 before
attempting to process it.
ASTERISK-28447
Reported-by: Gil Richard
Change-Id: Ic469544b22ab848734636588d4c93426cc6f4b1f
You can now add the "include_local_address" flag to an entry in
rtp.conf "[ice_host_candidates]" to include both the advertized
address and the local address in ICE negotiation:
[ice_host_candidates]
192.168.1.1 = 1.2.3.4,include_local_address
This causes both 192.168.1.1 and 1.2.3.4 to be advertized.
Change-Id: Ide492cd45ce84546175ca7d557de80d9770513db
This change fixes two bugs which both resulted in the packet loss
count exceeding 65,000.
The first issue is that the sequence number check to determine if
cycling had occurred was using the wrong variable resulting in the
check never seeing that cycling has occurred, throwing off the
packet loss calculation. It now uses the correct variable.
The second issue is that the packet loss calculation assumed that
the received number of packets in an interval could never exceed
the expected number. In practice this isn't true due to delayed
or retransmitted packets. The expected will now be updated to
the received number if the received exceeds it.
ASTERISK-28379
Change-Id: If888ebc194ab69ac3194113a808c414b014ce0f6
When multiple endpoints try to register close together using the same
AOR with qualify_frequency set, one contact would qualify immediately
while the other contacts would have to wait out the duration of the
timer before being able to qualify. Changing the conditional to check
the contact container count for a non-zero value allows all contacts to
qualify immediately.
Change-Id: I79478118ee7e0d6e76af7c354d66684220db9415
When we use early bridge with create and dial from stasis using Local channel
and the dialplan does not any entry the it is returned from core_local.c with
No such extension .
In such case asterisk locks up till the channel is not hangup with the error
Exceptionally long voice queue length
* Found that in such case app_control_dial fails on ast_call method and
return -1
* Since it is called from stasis_app_send_command_async and return -1 does
not cause resources to be freed and since no PBX exist it is not able to
read from channel causing exceptionally long queue
* After putting this code found that the channel was releasing immediately
and resources were freed.
ASTERISK-28399
Reported by: Abhay Gupta
Tested by: Abhay Gupta
Change-Id: I0a55c923fc6995559f808d63b9488762b4489318
Updated ast_sip_create_rdata_with_contact and registrar_find_contact
to check the return from pjsip_parse_uri before attempting to
use the uri returned.
ASTERISK-28402
Reported-by: Ross Beer
Change-Id: I9810b3b163c45ed5a56ec743586e5ce107f13ba7
The dial bridge is meant to hold channels which have been created
and dialed in stasis. It handles the frames coming from them and raises
the appropriate events.
It was possible for the code to mistakenly place calls which came
from the dialplan into the dial bridge if they were not in an
answered state. These channels are not outgoing channels and
should not be placed into the dial bridge.
The code now checks to ensure that only stasis created channels are
placed into the dial bridge by checking that a PBX does not exist
on the channel.
ASTERISK-27756
Change-Id: Ideee69ff06c9a0b31f7ed61165f5c055f51d21b6
The transport-cc draft is a mechanism by which additional information
about packet reception can be provided to the sender of packets so
they can do sender side bandwidth estimation. This is accomplished
by having a transport specific sequence number and an RTCP feedback
message. This change implements this in the receiver direction.
For each received RTP packet where transport-cc is negotiated we store
the time at which the RTP packet was received and its sequence number.
At a 1 second interval we go through all packets in that period of time
and use the stored time of each in comparison to its preceding packet to
calculate its delta. This delta information is placed in the RTCP
feedback message, along with indicators for any packets which were not
received.
The browser then uses this information to better estimate available
bandwidth and adjust accordingly. This may result in it lowering the
available send bandwidth or adjusting how "bursty" it can be.
ASTERISK-28400
Change-Id: I654a2cff5bd5554ab94457a14f70adb71f574afc
There is enough MWI functionality to warrant it having its own 'c' and header
files. This patch moves all current core MWI data structures, and functions
into the following files:
main/mwi.h
main/mwi.c
Note, code was simply moved, and not modified. However, this patch is also in
preparation for core MWI changes, and additions to come.
Change-Id: I9dde8bfae1e7ec254fa63166e090f77e4d3097e0
Added a new PJSIP global setting called norefersub.
Default is true to keep support working as before.
res_pjsip_refer: Configures PJSIP norefersub capability accordingly.
Checks the PJSIP global setting value.
If it is true (default) it adds the norefersub capability to PJSIP.
If it is false (disabled) it does not add the norefersub capability
to PJSIP.
This is useful for Cisco switches that do not follow RFC4488.
ASTERISK-28375 #close
Reported-by: Dan Cropp
Change-Id: I0b1c28ebc905d881f4a16e752715487a688b30e9
An earlier contributor apparently forgot to run 'make ari-stubs'
before committing after making ARI model changes.
Change-Id: I7813e5638e2821d11f4b968dc2aeab4f725190a6
Reset the internal counter that the AEL2 compiler uses for unique label
names before compiling. This keeps dialplan labels consistent across
reloads assuming the AEL2 has not changed.
ASTERISK-17799 #close
Reported by: Kirill Katsnelson
Change-Id: I30b3cc887d1ee0644d3f341e2fef16f525d7fae5
In AEL2, if a 'for' statement contains macro* calls, like:
for (&iterator(${TRY},A); "${A}" != ""; &iterate(A)) {
The AEL2 parser will translate these into calls to the deprecated Macro
dialplan application and use the antiquated pipe delimiter.
Instead, convert these into calls to the Gosub dialplan application and
use commas as argument separators.
ASTERISK-18593 #close
Reported by: Luke-Jr
* 'macro' in this context means AEL2 macros, not the 'Macro' application
Change-Id: I3d73716033b8e3e42e0209d355bf5f10c97045fc
When generating the regular expression that matches against existing
extensions, we need to escape literal characters that can also be
regular expression metacharacters. This was already being done for '*'
but we need to do the same for '+'.
In passing, remove some unreachable code - strcmp() is already run
immediately when entering extension_matches().
ASTERISK-14939 #close
Reported by: klaus3000
Change-Id: I8d2cccb3479168fba1b0a6704c52198b396468f1
It was difficult to check the channel's current application and
parameters using ARI for current channels. Added app_name, app_data
items to show the current application information.
ASTERISK-28343
Change-Id: Ia48972b3850e5099deab0faeaaf51223a1f2f38c
REMB's exponent is 6-bits (0..63) and has a mantissa of 18-bits. We were using
an unsigned integer to represent the bitrate. However, that type is not large
enough to hold all potential bitrate values. If the bitrate is large enough
bits were being shifted off the "front" of the mantissa, which caused the
wrong value to be sent to the browser.
This patch makes it so it now uses a float type to hold the bitrate. Using a
float allows for all bitrate values to be correctly represented.
ASTERISK-28255
Change-Id: Ice00fdd16693b16b41230664be5d9f0e465b239e
It looks like we're not properly calculating jitter values on received
video streams. This patch enables the code that does jitter calculations
for those streams.
Change-Id: Iaac985808829c8f034db8c57318789c4c8c11392
Added ARI resource for channel statistics.
GET /ari/channels/{channelId}/rtp_statistics : It returns given
channel's rtp statistics detail.
ASTERISK-28320
Change-Id: I4343eec070438cec13f2a4f22e7fd9e574381376
Changed to requirement to having timestamp for all of ARI events.
The below ARI events were changed to having timestamp.
PlaybackStarted, PlaybackContinuing, PlaybackFinished,
RecordingStarted, RecordingFinished, RecordingFailed,
ApplicationReplaced, ApplicationMoveFailed
ASTERISK-28326
Change-Id: I382c2fef58f5fe107e1074869a6d05310accb41f
If Realtime @ variable value is NULL or empty or contains only whitespaces
then when we try to retrieve it using PJSIP_ENDPOINT we get WARNING
pjsip_endpoint_function_read: Unknown property @my_var for PJSIP endpoint.
And the variable is missing in the result of CLI pjsip show endpoint.
This patch keeps empty sorcery extended field.
ASTERISK-28341 #close
Change-Id: I221fccc04cbfa2be17ce971f64ae0e74e465eea0
Because StasisEnd's timestamp created it's own timestamp, it makes
wrong timestamp, compare to other channel event(ChannelDestroyed).
Fixed to getting a timestamp from the Channel's timestamp.
ASTERISK-28333
Change-Id: I5eb8380fc472f1100535a6bc4983c64767026116
As part of an earlier voicemail refactor, ast_delete_mwi_state_full
was modified to remove the pool topic for a mailbox when the state
was deleted. This was an attempt to prevent stale topics from
accumulating when app_voicemail was reloaded and a mailbox went
away. Unfortunately because of the fact that when app_voicemail
reloads, ALL mailboxes are deleted then only current ones recreated,
topics were being removed from the pool that still had subscribers
on them, then recreated as new topics of the same name. So now
modules like res_pjsip_mwi are listening on a topic that will
never receive any messages because app_voicemail is publishing on
a different topic that happens to have the same name. The solutiuon
to this is not easy and given that accumulating topics for
deleted mailboxes is less evil that not sending NOTIFYs...
* Removed the call to stasis_topic_pool_delete_topic in
ast_delete_mwi_state_full.
Also:
* Fixed a topic reference leak in res_pjsip_mwi
mwi_stasis_subscription_alloc.
* Added some debugging to mwi_stasis_subscription_alloc,
stasis_topic_create, and topic_dtor.
* Fixed a topic reference leak in an error path in
internal_stasis_subscribe.
ASTERISK-28306
Reported-by: Jared Hull
Change-Id: Id7da0990b3ac4be4b58491536b35f41291247b27
Topic names now follow: <subsystem>:<functionality>[/<object>]
This ensures that they are all unique, and also provides better
insight in to what each topic is for.
Subscriber ids now also use the main topic name they are
subscribed to and an incrementing integer as their identifier to
make it easier to understand what the subscription is primarily
responsible for.
Both the CLI commands for listing topic and subscription statistics
now sort to make it a bit easier to see what is going on.
Subscriptions will now show all topics that they are receiving messages
from, not just the main topic they were subscribed to.
ASTERISK-28335
Change-Id: I484e971a38c3640f2bd156282e532eed84bf220d
Currently, when the Asterisk calculates rtp statistics, it uses
sample_count as a unsigned integer parameter. This would be fine
for most of cases, but in case of large enough number of sample_count,
this might be causing the divide by zero error.
ASTERISK-28321
Change-Id: If7e0629abaceddd2166eb012456c53033ea26249
chan_sip will always ignore 183 responses that do not contain SDP
however, chan_pjsip will currently always translate it into a
183 with SDP. This new flag allows chan_pjsip to have the same
behavior as chan_sip.
ASTERISK-28322 #close
Change-Id: If81cfaa17c11b6ac703e3d71696f259d86c6be4a
George Joseph
Joshua Colp
Ben Ford
agupta
Friendly Automation
Kevin Harwell
Dan Cropp
Sean Bright
Alexei Gradinari
sungtae kim
Matthew Fredrickson
Torrey Searle