|
|
|
@ -81,13 +81,6 @@ srvlookup=yes ; Enable DNS SRV lookups on outbound calls
|
|
|
|
|
; and subscriptions (seconds)
|
|
|
|
|
;minexpiry=60 ; Minimum length of registrations/subscriptions (default 60)
|
|
|
|
|
;defaultexpiry=120 ; Default length of incoming/outgoing registration
|
|
|
|
|
;t1min=100 ; Minimum roundtrip time for messages to monitored hosts
|
|
|
|
|
; Defaults to 100 ms
|
|
|
|
|
;timert1=500 ; Default T1 timer
|
|
|
|
|
; Defaults to 500 ms
|
|
|
|
|
;timerb=32000 ; Call setup timer. If a provisional response is not received
|
|
|
|
|
; in this amount of time, the call will autocongest
|
|
|
|
|
; Defaults to 64*timert1
|
|
|
|
|
;notifymimetype=text/plain ; Allow overriding of mime type in MWI NOTIFY
|
|
|
|
|
;buggymwi=no ; Cisco SIP firmware doesn't support the MWI RFC
|
|
|
|
|
; fully. Enable this option to not get error messages
|
|
|
|
@ -191,6 +184,19 @@ srvlookup=yes ; Enable DNS SRV lookups on outbound calls
|
|
|
|
|
; this setting will enforce inactivation of the regexten
|
|
|
|
|
; extension for the peer
|
|
|
|
|
;
|
|
|
|
|
;--------------------------- SIP timers ----------------------------------------------------
|
|
|
|
|
; These timers are used primarily in INVITE transactions.
|
|
|
|
|
; The default for Timer T1 is 500 ms or the measured run-trip time between
|
|
|
|
|
; Asterisk and the device if you have qualify=yes for the device.
|
|
|
|
|
;
|
|
|
|
|
;t1min=100 ; Minimum roundtrip time for messages to monitored hosts
|
|
|
|
|
; Defaults to 100 ms
|
|
|
|
|
;timert1=500 ; Default T1 timer
|
|
|
|
|
; Defaults to 500 ms
|
|
|
|
|
;timerb=32000 ; Call setup timer. If a provisional response is not received
|
|
|
|
|
; in this amount of time, the call will autocongest
|
|
|
|
|
; Defaults to 64*timert1
|
|
|
|
|
|
|
|
|
|
;--------------------------- RTP timers ----------------------------------------------------
|
|
|
|
|
; These timers are currently used for both audio and video streams. The RTP timeouts
|
|
|
|
|
; are only applied to the audio channel.
|
|
|
|
|