asterisk

Commit Graph

Author	SHA1	Message	Date
Naveen Albert	953dc3d127	chan_dahdi: Allow specifying waitfordialtone per call. The existing "waitfordialtone" setting in chan_dahdi.conf applies permanently to a specific channel, regardless of how it is being used. This rather restrictively prevents a system from simultaneously being able to pick free lines for outgoing calls while also allowing barge-in to a trunk by some other arrangement. This allows specifying "waitfordialtone" using the CHANNEL function for only the next call that will be placed, allowing significantly more flexibility in the use of trunk interfaces. Resolves: #472 UserNote: "waitfordialtone" may now be specified for DAHDI trunk channels on a per-call basis using the CHANNEL function.	2 years ago
Naveen Albert	a3be6a455f	chan_dahdi: Allow MWI to be manually toggled on channels. This adds a CLI command to manually toggle the MWI status of a channel, useful for troubleshooting or resetting MWI devices, similar to the capabilities offered with SIP messaging to manually control MWI status. UserNote: The 'dahdi set mwi' now allows MWI on channels to be manually toggled if needed for troubleshooting. Resolves: #440	2 years ago
Naveen Albert	301b0258bf	sig_analog: Add Called Subscriber Held capability. This adds support for Called Subscriber Held for FXS lines, which allows users to go on hook when receiving a call and resume the call later from another phone on the same line, without disconnecting the call. This is a convenience mechanism that most real PSTN telephone switches support. ASTERISK-30372 #close Resolves: #240 UserNote: Called Subscriber Held is now supported for analog FXS channels, using the calledsubscriberheld option. This allows a station user to go on hook when receiving an incoming call and resume from another phone on the same line by going on hook, without disconnecting the call.	2 years ago
Naveen Albert	d16046e41f	chan_dahdi: Allow autoreoriginating after hangup. Currently, if an FXS channel is still off hook when all calls on the line have hung up, the user is provided reorder tone until going back on hook again. In addition to not reflecting what most commercial switches actually do, it's very common for switches to automatically reoriginate for the user so that dial tone is provided without the user having to depress and release the hookswitch manually. This can increase convenience for users. This behavior is now supported for kewlstart FXS channels. It's supported only for kewlstart (FXOKS) mainly because the behavior doesn't make any sense for ground start channels, and loop start signalling doesn't provide the necessary DAHDI event that makes this easy to implement. Likely almost everyone is using FXOKS over FXOLS anyways since FXOLS is pretty useless these days. ASTERISK-30357 #close Resolves: #224 UserNote: The autoreoriginate setting now allows for kewlstart FXS channels to automatically reoriginate and provide dial tone to the user again after all calls on the line have cleared. This saves users from having to manually hang up and pick up the receiver again before making another call.	2 years ago
Naveen Albert	e1a1ae933b	sig_analog: Allow three-way flash to time out to silence. sig_analog allows users to flash and use the three-way dial tone as a primitive hold function, simply by never timing it out. Some systems allow this dial tone to time out to silence, so the user is not annoyed by a persistent dial tone. This option allows the dial tone to time out normally to silence. ASTERISK-30004 #close Resolves: #205 UserNote: The threewaysilenthold option now allows the three-way dial tone to time out to silence, rather than continuing forever.	2 years ago
Naveen Albert	8cd7548e43	sig_analog: Allow immediate fake ring to be suppressed. When immediate=yes on an FXS channel, sig_analog will start fake audible ringback that continues until the channel is answered. Even if it answers immediately, the ringback is still audible for a brief moment. This can be disruptive and unwanted behavior. This adds an option to disable this behavior, though the default behavior remains unchanged. ASTERISK-30003 #close Resolves: #118 UserNote: The immediatering option can now be set to no to suppress the fake audible ringback provided when immediate=yes on FXS channels.	2 years ago
Naveen Albert	9a999242b2	chan_dahdi: Add dialmode option for FXS lines. Currently, both pulse and tone dialing are always enabled on all FXS lines, with no way of disabling one or the other. In some circumstances, it is desirable or necessary to disable one of these, and this behavior can be problematic. A new "dialmode" option is added which allows setting the methods to support on a per channel basis for FXS (FXO signalled lines). The four options are "both", "pulse", "dtmf"/"tone", and "none". Additionally, integration with the CHANNEL function is added so that this setting can be updated for a channel during a call. Resolves: #35 ASTERISK-29992 UserNote: A "dialmode" option has been added which allows specifying, on a per-channel basis, what methods of subscriber dialing (pulse and/or tone) are permitted. Additionally, this can be changed on a channel at any point during a call using the CHANNEL function.	3 years ago
Sarah Autumn	466eb4a52b	sig_analog: Changes to improve electromechanical signalling compatibility This changeset is intended to address compatibility issues encountered when interfacing Asterisk to electromechanical telephone switches that implement ANI-B, ANI-C, or ANI-D. In particular the behaviours that this impacts include: - FGC-CAMA did not work at all when using MF signaling. Modified the switch case block to send calls to the correct part of the signaling-handling state machine. - For FGC-CAMA operation, the delay between called number ST and second wink for ANI spill has been made configurable; previously all calls were made to wait for one full second. - After the ANI spill, previous behavior was to require a 'ST' tone to advance the call. This has been changed to allow 'STP' 'ST2P' or 'ST3P' as well, for compatibility with ANI-D. - Store ANI2 (ANI INFO) digits in the CALLERID(ANI2) channel variable. - For calls with an ANI failure, No. 1 Crossbar switches will send forward a single-digit failure code, with no calling number digits and no ST pulse to terminate the spill. I've made the ANI timeout configurable so to reduce dead air time on calls with ANI fail. - ANI info digits configurable. Modern digital switches will send 2 digits, but ANI-B sends only a single info digit. This caused the ANI reported by Asterisk to be misaligned. - Changed a confusing log message to be more informative. ASTERISK-29518 Change-Id: Ib7e27d987aee4ed9bc3663c57ef413e21b404256	4 years ago
Kevin Harwell	bdd785d31c	various files - fix some alerts raised by lgtm code analysis This patch fixes several issues reported by the lgtm code analysis tool: https://lgtm.com/projects/g/asterisk/asterisk Not all reported issues were addressed in this patch. This patch mostly fixes confirmed reported errors, potential problematic code points, and a few other "low hanging" warnings or recommendations found in core supported modules. These include, but are not limited to the following: * innapropriate stack allocation in loops * buffer overflows * variable declaration "hiding" another variable declaration * comparisons results that are always the same * ambiguously signed bit-field members * missing header guards Change-Id: Id4a881686605d26c94ab5409bc70fcc21efacc25	6 years ago
Kevin Harwell	9637e1dfdc	MWI: Update modules that subscribe to MWI to use new API calls The MWI core recently got some new API calls that make tracking MWI state lifetime more reliable. This patch updates those modules that subscribe to specific MWI topics to use the new API. Specifically, these modules now subscribe to both MWI topics and MWI state. ASTERISK-28442 Change-Id: I32bef880b647246823dbccdf44a98d384fcabfbd	6 years ago
Guido Falsi	db535439f2	chan_dahdi: add missing include. After some definitions have been moved to asterisk/mwi.h the files channels/chan_dahdi.h channels/sig_pri.c are missing this new include. ASTERISK-28427 #close Change-Id: Ia8cc595eeda653324643f40dcd9799d4c3f0ac91	7 years ago
Tzafrir Cohen	6301531416	chan_dahdi: Configurable dialed digit timeouts Analog phones dial overlap dialing and it is chan_dahdi's job to read the numbers. It has three timeout constants that this commit converts to channel-level configuration options: * firstdigit_timeout: Default time (ms) to detect first digit * interdigit_timeout: Default time (ms) to detect following digits * matchdigit_timeout: Default time (ms) to wait in case of ambiguous match. This happens when the dialed digits match a number in the current context but are also the prefix of another number. Change-Id: Ib728fa900a4f6ae56d1ed810aba61b6593fb7213	8 years ago
Richard Mudgett	0d1744e132	chan_dahdi: Add faxdetect_timeout option. The new option allows the channel driver's faxdetect option to timeout on a call after the specified number of seconds into a call. The new feature is disabled if the timeout is set to zero. The option is disabled by default. * Don't clear dsp_features after passing them to the dsp code in my_pri_ss7_open_media(). We should still remember them especially for the new faxdetect_timeout option. ASTERISK-26214 Reported by: Richard Mudgett Change-Id: Ieffd3fe788788d56282844774365546dce8ac810	9 years ago
Richard Mudgett	c7cc1b3059	chan_dahdi/sig_analog: Fix distinctive ring detection to suck less. The distinctive ring feature interferes with detecting Caller ID and appears to have been broken for years. What happens is if you have a ring-ring cadence as used in the UK you get too many DAHDI events for the distinctive ring pattern array and Caller ID detection is aborted. I think when Zapata/DAHDI added the ring begin event it broke distinctive ring. More events happen than before and the code does no filtering of which event times are recorded in the pattern array. * Made distinctive ring only record the ringt count when the ring ends instead of on just any DAHDI event. Distinctive ring can be ring, ring-ring, ring-ring-ring, or different ring durations for the up to three rings. * Fixed the distinctive ring detection enable (chan_dahdi.conf option usedistinctiveringdetection) to be per port instead of somewhat per port and somewhat global. This has been broken since v1.8. * Fixed using the default distinctive ring context when the detected pattern does not match any configured dringX patterns. The default context did not get set when the previous call was a matched distinctive ring pattern and the current call is not matched. This has been broken since v1.8. * Made distinctive ring have no effect on Caller ID detection when it is disabled. Caller ID detection just monitors for 10 seconds before giving up. * Fixed leak of struct callerid_state memory when a polarity reversal during Caller ID detection causes the incoming call to be aborted. DAHDI-1143 AST-1545 ASTERISK-24825 #close Reported by: Richard Mudgett ASTERISK-17588 Reported by: Daniel Flounders Review: https://reviewboard.asterisk.org/r/4444/ ........ Merged revisions 432530 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 432534 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432551 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	0c896d8b9b	chan_dahdi: Adds support for major update to libss7. * SS7 support now requires libss7 v2.0 or later. The new libss7 is not backwards compatible. * Added SS7 support for connected line and redirecting. * Most SS7 CLI commands are reworked as well as new SS7 commands added. See online CLI help. * Added several SS7 config option parameters described in chan_dahdi.conf.sample. * ISUP timer support reworked and now requires explicit configuration. See ss7.timers.sample. Special thanks to Kaloyan Kovachev for his support and persistence in getting the original patch by adomjan updated and ready for release. SS7-27 #close Reported by: adomjan git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@416416 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	e4803bbd9e	Voicemail: Remove mailbox identifier format (box@context) assumptions in the system. This change is in preparation for external MWI support. Removed code from the system for normal mailbox handling that appends @default to the mailbox identifier if it does not have a context. The only exception is the legacy hasvoicemail users.conf option. The legacy option will only work for app_voicemail mailboxes. The system cannot make any assumptions about the format of the mailbox identifer used by app_voicemail. chan_sip and chan_dahdi/sig_pri had the most changes because they both tried to interpret the mailbox identifier. chan_sip just stored and compared the two components. chan_dahdi actually used the box information. The ISDN MWI support configuration options had to be reworked because chan_dahdi was parsing the box@context format to get the box number. As a result the mwi_vm_boxes chan_dahdi.conf option was added and is documented in the chan_dahdi.conf.sample file. Review: https://reviewboard.asterisk.org/r/3072/ ........ Merged revisions 404348 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404350 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	2127848d6c	chan_dahdi: Add config support for hwgain settings. * Add hwtxgain and hwrxgain config options to chan_dahdi.conf with documentation in chan_dahdi.conf.sample. (closes issue ASTERISK-22429) Reported by: Jaco Kroon Patches: jira_asterisk_22429_hwgain_trunk.patch (license #5621) patch uploaded by rmudgett git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400950 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	edb437ee6c	chan_dahdi: Reflect the set software gain in the CLI "dahdi show channel" output. * Remember the swgain setting from CLI "dahdi set swgain" command so the CLI "dahdi show channel" output will reflect the current setting. * Updated CLI "dahdi set hwgain" and "dahdi set swgain" documentation. (issue ASTERISK-22429) Reported by: Jaco Kroon Patches: jira_asterisk_22429_v1.8_v2.patch (license #5621) patch uploaded by rmudgett ........ Merged revisions 400907 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 400909 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 400911 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400913 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	b4dd4ffbc4	Some chan_dahdi protected function renaming. analog_lib_handles --> dahdi_analog_lib_handles enable_dtmf_detect --> dahdi_dtmf_detect_enable disable_dtmf_detect --> dahdi_dtmf_detect_disable dahdi_enable_ec --> dahdi_ec_enable dahdi_disable_ec --> dahdi_ec_disable update_conf --> dahdi_conf_update dahdi_link --> dahdi_master_slave_link dahdi_unlink --> dahdi_master_slave_unlink (closes issue ASTERISK-22129) Reported by: rmudgett git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395167 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	83a871ea35	Restore chan_dahdi native bridging and PRI tromboned call elimination. Created a native_dahdi bridging technology for use with the new bridging API. The new bridging technology is part of the chan_dahdi channel driver because it is very specific to that driver. Rather than include the new code directly into chan_dahdi.c the new bridge technology is in its own file and linked into chan_dahdi.so. A large part of this change is the mechanical process of moving declarations around so chan_dahdi.c can be split up into more files later. * Changed the bridging core to pass NULL frames into the channel technologies instead of discarding them. The channel technologies may need the proding to determine if their configuration is still valid. (closes issue ASTERISK-21886) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/2681/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395154 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago

20 Commits (22.0.0-pre1)